ARM: OMAP4+: PM: Use only valid low power state for CPU hotplug

Not all SoCs support OFF mode - for example DRA74/72. So, use valid
power state during CPU hotplug.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 4001325f90fb97cef21b1567e3252506d308af49..e9cdacfe19235dc30caeb7845bfdada5eebaf3b0 100644 (file)
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -298,6 +298,10 @@ int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
        if (omap_rev() == OMAP4430_REV_ES1_0)
                return -ENXIO;
 
+       /* Use the achievable power state for the domain */
+       power_state = pwrdm_get_valid_lp_state(pm_info->pwrdm,
+                                              false, power_state);
+
        if (power_state == PWRDM_POWER_OFF)
                cpu_state = 1;