#include "mlx5_core.h"
#include "lib/eq.h"
#include "lib/mlx5.h"
+#include "lib/pci_vsc.h"
enum {
MLX5_HEALTH_POLL_INTERVAL = 2 * HZ,
enum {
MLX5_SENSOR_NO_ERR = 0,
MLX5_SENSOR_PCI_COMM_ERR = 1,
- MLX5_SENSOR_NIC_DISABLED = 2,
- MLX5_SENSOR_NIC_SW_RESET = 3,
+ MLX5_SENSOR_PCI_ERR = 2,
+ MLX5_SENSOR_NIC_DISABLED = 3,
+ MLX5_SENSOR_NIC_SW_RESET = 4,
+ MLX5_SENSOR_FW_SYND_RFR = 5,
};
u8 mlx5_get_nic_state(struct mlx5_core_dev *dev)
return (ioread32be(&h->fw_ver) == 0xffffffff);
}
+static bool sensor_fw_synd_rfr(struct mlx5_core_dev *dev)
+{
+ struct mlx5_core_health *health = &dev->priv.health;
+ struct health_buffer __iomem *h = health->health;
+ u32 rfr = ioread32be(&h->rfr) >> MLX5_RFR_OFFSET;
+ u8 synd = ioread8(&h->synd);
+
+ if (rfr && synd)
+ mlx5_core_dbg(dev, "FW requests reset, synd: %d\n", synd);
+ return rfr && synd;
+}
+
static u32 check_fatal_sensors(struct mlx5_core_dev *dev)
{
if (sensor_pci_not_working(dev))
return MLX5_SENSOR_PCI_COMM_ERR;
+ if (pci_channel_offline(dev->pdev))
+ return MLX5_SENSOR_PCI_ERR;
if (mlx5_get_nic_state(dev) == MLX5_NIC_IFC_DISABLED)
return MLX5_SENSOR_NIC_DISABLED;
if (mlx5_get_nic_state(dev) == MLX5_NIC_IFC_SW_RESET)
return MLX5_SENSOR_NIC_SW_RESET;
+ if (sensor_fw_synd_rfr(dev))
+ return MLX5_SENSOR_FW_SYND_RFR;
return MLX5_SENSOR_NO_ERR;
}
+static int lock_sem_sw_reset(struct mlx5_core_dev *dev, bool lock)
+{
+ enum mlx5_vsc_state state;
+ int ret;
+
+ if (!mlx5_core_is_pf(dev))
+ return -EBUSY;
+
+ /* Try to lock GW access, this stage doesn't return
+ * EBUSY because locked GW does not mean that other PF
+ * already started the reset.
+ */
+ ret = mlx5_vsc_gw_lock(dev);
+ if (ret == -EBUSY)
+ return -EINVAL;
+ if (ret)
+ return ret;
+
+ state = lock ? MLX5_VSC_LOCK : MLX5_VSC_UNLOCK;
+ /* At this stage, if the return status == EBUSY, then we know
+ * for sure that another PF started the reset, so don't allow
+ * another reset.
+ */
+ ret = mlx5_vsc_sem_set_space(dev, MLX5_SEMAPHORE_SW_RESET, state);
+ if (ret)
+ mlx5_core_warn(dev, "Failed to lock SW reset semaphore\n");
+
+ /* Unlock GW access */
+ mlx5_vsc_gw_unlock(dev);
+
+ return ret;
+}
+
+static bool reset_fw_if_needed(struct mlx5_core_dev *dev)
+{
+ bool supported = (ioread32be(&dev->iseg->initializing) >>
+ MLX5_FW_RESET_SUPPORTED_OFFSET) & 1;
+ u32 fatal_error;
+
+ if (!supported)
+ return false;
+
+ /* The reset only needs to be issued by one PF. The health buffer is
+ * shared between all functions, and will be cleared during a reset.
+ * Check again to avoid a redundant 2nd reset. If the fatal erros was
+ * PCI related a reset won't help.
+ */
+ fatal_error = check_fatal_sensors(dev);
+ if (fatal_error == MLX5_SENSOR_PCI_COMM_ERR ||
+ fatal_error == MLX5_SENSOR_NIC_DISABLED ||
+ fatal_error == MLX5_SENSOR_NIC_SW_RESET) {
+ mlx5_core_warn(dev, "Not issuing FW reset. Either it's already done or won't help.");
+ return false;
+ }
+
+ mlx5_core_warn(dev, "Issuing FW Reset\n");
+ /* Write the NIC interface field to initiate the reset, the command
+ * interface address also resides here, don't overwrite it.
+ */
+ mlx5_set_nic_state(dev, MLX5_NIC_IFC_SW_RESET);
+
+ return true;
+}
+
void mlx5_enter_error_state(struct mlx5_core_dev *dev, bool force)
{
mutex_lock(&dev->intf_state_mutex);
if (dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR)
goto unlock;
+ if (dev->state == MLX5_DEVICE_STATE_UNINITIALIZED) {
+ dev->state = MLX5_DEVICE_STATE_INTERNAL_ERROR;
+ goto unlock;
+ }
- mlx5_core_err(dev, "start\n");
- if (pci_channel_offline(dev->pdev) ||
- dev->priv.health.fatal_error != MLX5_SENSOR_NO_ERR || force) {
+ if (check_fatal_sensors(dev) || force) {
dev->state = MLX5_DEVICE_STATE_INTERNAL_ERROR;
mlx5_cmd_flush(dev);
}
mlx5_notifier_call_chain(dev->priv.events, MLX5_DEV_EVENT_SYS_ERROR, (void *)1);
+unlock:
+ mutex_unlock(&dev->intf_state_mutex);
+}
+
+#define MLX5_CRDUMP_WAIT_MS 60000
+#define MLX5_FW_RESET_WAIT_MS 1000
+void mlx5_error_sw_reset(struct mlx5_core_dev *dev)
+{
+ unsigned long end, delay_ms = MLX5_FW_RESET_WAIT_MS;
+ int lock = -EBUSY;
+
+ mutex_lock(&dev->intf_state_mutex);
+ if (dev->state != MLX5_DEVICE_STATE_INTERNAL_ERROR)
+ goto unlock;
+
+ mlx5_core_err(dev, "start\n");
+
+ if (check_fatal_sensors(dev) == MLX5_SENSOR_FW_SYND_RFR) {
+ /* Get cr-dump and reset FW semaphore */
+ lock = lock_sem_sw_reset(dev, true);
+
+ if (lock == -EBUSY) {
+ delay_ms = MLX5_CRDUMP_WAIT_MS;
+ goto recover_from_sw_reset;
+ }
+ /* Execute SW reset */
+ reset_fw_if_needed(dev);
+ }
+
+recover_from_sw_reset:
+ /* Recover from SW reset */
+ end = jiffies + msecs_to_jiffies(delay_ms);
+ do {
+ if (mlx5_get_nic_state(dev) == MLX5_NIC_IFC_DISABLED)
+ break;
+
+ cond_resched();
+ } while (!time_after(jiffies, end));
+
+ if (mlx5_get_nic_state(dev) != MLX5_NIC_IFC_DISABLED) {
+ dev_err(&dev->pdev->dev, "NIC IFC still %d after %lums.\n",
+ mlx5_get_nic_state(dev), delay_ms);
+ }
+
+ /* Release FW semaphore if you are the lock owner */
+ if (!lock)
+ lock_sem_sw_reset(dev, false);
+
mlx5_core_err(dev, "end\n");
unlock:
case MLX5_NIC_IFC_NO_DRAM_NIC:
mlx5_core_warn(dev, "Expected to see disabled NIC but it is no dram nic\n");
break;
+
+ case MLX5_NIC_IFC_SW_RESET:
+ /* The IFC mode field is 3 bits, so it will read 0x7 in 2 cases:
+ * 1. PCI has been disabled (ie. PCI-AER, PF driver unloaded
+ * and this is a VF), this is not recoverable by SW reset.
+ * Logging of this is handled elsewhere.
+ * 2. FW reset has been issued by another function, driver can
+ * be reloaded to recover after the mode switches to
+ * MLX5_NIC_IFC_DISABLED.
+ */
+ if (dev->priv.health.fatal_error != MLX5_SENSOR_PCI_COMM_ERR)
+ mlx5_core_warn(dev, "NIC SW reset in progress\n");
+ break;
+
default:
mlx5_core_warn(dev, "Expected to see disabled NIC but it is has invalid value %d\n",
nic_interface);
projects / openwrt / staging / blogic.git / commitdiff