Changes since U-Boot 0.2.2:
======================================================================
+* Patch by Arun Dharankar, 4 Apr 2003:
+ Add IDMA example code (tested on 8260 only)
+
+* Add support for Purple Board (MIPS64 5Kc)
+
+* Add support for MIPS64 5Kc CPUs
+
+* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
+
+* Patch by Denis Peter, 04 Apr 2003:
+ - update MIP405-4 board
+
* Patch by Stefan Roese, 4 Apr 2003:
- U-Boot version environment variable "ver" added
(CONFIG_VERSION_VARIABLE).
- Changed PPC405GPr version from A to B.
- Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
+* Patches by Denis Peter, 03 April 2003:
+ - fix PCI IRQs on MPL boards
+ - fix two more un-relocated pointer problems
+
+* Fix behaviour of "run" command:
+ - print error message iv variable does not exist
+ - terminate processing of arguments in case of error
+
+* Patches by Peter Figuli, 10 Mar 2003
+ - Add support for BTUART on PXA platform
+ - Add support for WEP EP250 (PXA) board
+
+* Fix flash problems on INCA-IP; add tool to allow bruning images to
+ flash using a BDI2000
+
+* Implement fix for I2C Edge Conditions problem for all boards that
+ use the bit-banging driver (common/soft_i2c.c)
+
* Patch by Martin Winistoerfer, 23 Mar 2003
- Add port to MPC555/556 microcontrollers
- Add support for cmi customer board with
* Add patches by Robert Schwebel, 31 Mar 2003:
- add ctrl-c support for kermit download
- align bdinfo output on ARM
+ - csb226 board: bring in sync with innokom/memsetup.S
+ - csb226 board: fix MDREFR handling
+ - misc doc fixes / extensions
+ - innokom board: cleanup, MDREFR fix in memsetup.S, config update
+ - add BOOT_PROGRESS to armlinux.c
* Add CPU ID, version, and clock speed for INCA-IP
D: Support for Interphase 4539 T1/E1/J1 PMC, PN62, CCM, SCM boards
W: www.denx.de
+N: Peter Figuli
+E: peposh@etc.sk
+D: Support for WEP EP250 (PXA) board
+
N: Thomas Frieden
E: ThomasF@hyperion-entertainment.com
D: Support for AmigaOne
# Board CPU #
#########################################################################
+Peter Figuli <peposh@etc.sk>
+
+ wepep250 xscale
+
Marius Gröger <mag@sysgo.de>
impa7 ARM720T (EP7211)
Wolfgang Denk <wd@denx.de>
incaip MIPS32 4Kc
+ purple MIPS64 5Kc
#########################################################################
# End of MAINTAINERS list #
## Xscale Systems
#########################################################################
-LIST_xscale="cradle csb226 innokom lubbock"
+LIST_xscale="cradle csb226 innokom lubbock wepep250"
LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_xscale}"
LIST_mips4kc="incaip"
-LIST_mips="${LIST_mips4kc}"
+LIST_mips5kc="purple"
+
+LIST_mips="${LIST_mips4kc} ${LIST_mips5kc}"
#----- for now, just run PPC by default -----
ELPPC_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
-
#========================================================================
# ARM
#========================================================================
lubbock_config : unconfig
@./mkconfig $(@:_config=) arm xscale lubbock
+wepep250_config : unconfig
+ @./mkconfig $(@:_config=) arm xscale wepep250
+
#========================================================================
# i386
#========================================================================
incaip_config : unconfig
@./mkconfig $(@:_config=) mips mips incaip
+purple_config : unconfig
+ @./mkconfig $(@:_config=) mips mips purple
+#########################################################################
+#########################################################################
clean:
find . -type f \
-o -name '*.o' -o -name '*.a' \) -print \
| xargs rm -f
rm -f examples/hello_world examples/timer \
- examples/eepro100_eeprom examples/sched
+ examples/eepro100_eeprom examples/sched \
+ examples/mem_to_mem_idma2intr
rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
rm -f tools/easylogo/easylogo tools/bmp_logo
rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
rm -fr *.*~
rm -f u-boot u-boot.bin u-boot.elf u-boot.srec u-boot.map System.map
rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
- rm -f cpu/mpc824x/bedbug_603e.c
+ rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c
rm -f include/asm/arch include/asm
mrproper \
These settings describe a second storage area used to hold
a redundand copy of the environment data, so that there is
- a valid backup copy in case there is a power failur during
+ a valid backup copy in case there is a power failure during
a "saveenv" operation.
BE CAREFUL! Any changes to the flash layout, and some changes to the
sub pc,pc,#4
.endm
+_TEXT_BASE:
+ .word TEXT_BASE
+
/*
* Memory setup
/* Step 2c: Write FLYCNFG FIXME: what's that??? */
/* ---------------------------------------------------------------- */
+ /* test if we run from flash or RAM - RAM/BDI: don't setup RAM */
+ adr r3, mem_init /* r0 <- current position of code */
+ ldr r2, =mem_init
+ cmp r3, r2 /* skip init if in place */
+ beq initirqs
+
/* ---------------------------------------------------------------- */
/* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */
/* ---------------------------------------------------------------- */
/* Before accessing MDREFR we need a valid DRI field, so we set */
- /* this to power on defaults + DIR field. */
+ /* this to power on defaults + DRI field. */
- ldr r4, =0x03ca4fff
- str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
- ldr r4, [r1, #MDREFR_OFFSET]
+ ldr r3, =CFG_MDREFR_VAL
+ ldr r2, =0xFFF
+ and r3, r3, r2
+ ldr r4, =0x03ca4000
+ orr r4, r4, r3
- ldr r4, =0x03ca4030
str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
- ldr r4, [r1, #MDREFR_OFFSET]
-
- /* Note: preserve the mdrefr value in r4 */
+ ldr r4, [r1, #MDREFR_OFFSET]
/* ---------------------------------------------------------------- */
/* Step 4: Initialize SDRAM */
/* ---------------------------------------------------------------- */
- /* Step 4a: assert MDREFR:K1RUN and MDREFR:K2RUN and configure */
+ /* Step 4a: assert MDREFR:K?RUN and configure */
/* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */
- orr r4, r4, #(MDREFR_K1RUN|MDREFR_K0RUN)
-
- str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
- ldr r4, [r1, #MDREFR_OFFSET]
-
+ ldr r4, =CFG_MDREFR_VAL
+ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
+ ldr r4, [r1, #MDREFR_OFFSET]
/* Step 4b: de-assert MDREFR:SLFRSH. */
- bic r4, r4, #(MDREFR_SLFRSH)
+ bic r4, r4, #(MDREFR_SLFRSH)
str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
ldr r4, [r1, #MDREFR_OFFSET]
* Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
*
* (C) Copyright 2002
- * Kai-Uwe Bloem, GDS, <kai-uwe.bloem@auerswald.de>
+ * Auerswald GmbH & Co KG, Germany
+ * Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>
*
* See file CREDITS for list of people who contributed to this
* project.
icr = ICR; ICR &= ~(ICR_SCLE | ICR_IUE);
/* set gpio pin low _before_ we change direction to output */
- GPCR(70) = GPIO_bit(70);
+ GPCR(70) = GPIO_bit(70);
/* now toggle between output=low and high-impedance */
for (i = 0; i < 20; i++) {
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
- /* arch number of Innokom board */
gd->bd->bi_arch_number = MACH_TYPE_INNOKOM;
-
- /* adress of boot parameters */
gd->bd->bi_boot_params = 0xa0000100;
-
- /* baud rate */
gd->bd->bi_baudrate = CONFIG_BAUDRATE;
return 0;
/* ---------------------------------------------------------------- */
/* Before accessing MDREFR we need a valid DRI field, so we set */
- /* this to power on defaults + DIR field. */
+ /* this to power on defaults + DRI field. */
- ldr r4, =0x03ca4fff
- str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
- ldr r4, [r1, #MDREFR_OFFSET]
+ ldr r3, =CFG_MDREFR_VAL
+ ldr r2, =0xFFF
+ and r3, r3, r2
+ ldr r4, =0x03ca4000
+ orr r4, r4, r3
- ldr r4, =0x03ca4030
str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
- ldr r4, [r1, #MDREFR_OFFSET]
-
- /* Note: preserve the mdrefr value in r4 */
+ ldr r4, [r1, #MDREFR_OFFSET]
/* ---------------------------------------------------------------- */
/* Step 4: Initialize SDRAM */
/* ---------------------------------------------------------------- */
- /* Step 4a: assert MDREFR:K1RUN and MDREFR:K2RUN and configure */
+ /* Step 4a: assert MDREFR:K?RUN and configure */
/* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */
- orr r4, r4, #(MDREFR_K1RUN|MDREFR_K0RUN)
-
- str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
- ldr r4, [r1, #MDREFR_OFFSET]
-
+ ldr r4, =CFG_MDREFR_VAL
+ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
+ ldr r4, [r1, #MDREFR_OFFSET]
/* Step 4b: de-assert MDREFR:SLFRSH. */
- bic r4, r4, #(MDREFR_SLFRSH)
+ bic r4, r4, #(MDREFR_SLFRSH)
str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
ldr r4, [r1, #MDREFR_OFFSET]
static void pci_pip405_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
{
unsigned char int_line = 0xff;
+ unsigned char pin;
/*
* Write pci interrupt line register
*/
if(PCI_DEV(dev)==0) /* Device0 = PPC405 -> skip */
return;
- if(PCI_FUNC(dev)==0)
- {
- /* assuming all function 0 are using their INTA# Pin*/
- int_line=PCI_IRQ_VECTOR(dev);
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
+ pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin);
+ if ((pin == 0) || (pin > 4))
+ return;
+
+ int_line = ((PCI_DEV(dev) + (pin-1) + 10) % 4) + 28;
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
#ifdef DEBUG
- printf("Fixup IRQ: dev %d (%x) int line %d 0x%x\n",
- PCI_DEV(dev),dev,int_line,int_line);
+ printf("Fixup IRQ: dev %d (%x) int line %d 0x%x\n",
+ PCI_DEV(dev),dev,int_line,int_line);
#endif
- }
}
extern void pci_405gp_init(struct pci_controller *hose);
fixup_irq: pci_pip405_fixup_irq,
};
+
+static void reloc_pci_cfg_table(struct pci_config_table *table)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned long addr;
+
+ for (; table && table->vendor; table++) {
+ addr = (ulong) (table->config_device) + gd->reloc_off;
+#ifdef DEBUG
+ printf ("device \"%d\": 0x%08lx => 0x%08lx\n",
+ table->device, (ulong) (table->config_device), addr);
+#endif
+ table->config_device =
+ (void (*)(struct pci_controller* hose, pci_dev_t dev,
+ struct pci_config_table *))addr;
+ table->priv[0]+=gd->reloc_off;
+ }
+}
+
void pci_init_board(void)
{
/*we want the ptrs to RAM not flash (ie don't use init list)*/
hose.fixup_irq = pci_pip405_fixup_irq;
hose.config_table = pci_pip405_config_table;
+ reloc_pci_cfg_table(hose.config_table);
+#ifdef DEBUG
+ printf("Init PCI: fixup_irq=%p config_table=%p hose=%p\n",pci_pip405_fixup_irq,pci_pip405_config_table,hose);
+#endif
pci_405gp_init(&hose);
}
2, /* Address Mode = 2 */
4, /* size value */
1}, /* ECC enabled */
+ { 0x03, /* Rev A, 128MByte -4 Board */
+ 3, /* Case Latenty = 3 */
+ 3, /* trp 20ns / 7.5 ns datain[27] */
+ 3, /* trcd 20ns /7.5 ns (datain[29]) */
+ 6, /* tras 44ns /7.5 ns (datain[30]) */
+ 4, /* tcpt 44 - 20ns = 24ns */
+ 3, /* Address Mode = 3 */
+ 5, /* size value */
+ 1}, /* ECC enabled */
{ 0xff, /* terminator */
0xff,
0xff,
int last_stage_init (void)
{
+ /* write correct LED configuration */
if (miiphy_write (0x1, 0x14, 0x2402) != 0) {
printf ("Error writing to the PHY\n");
}
+ /* since LED/CFG2 is not connected on the -2,
+ * write to correct capability information */
+ if (miiphy_write (0x1, 0x4, 0x01E1) != 0) {
+ printf ("Error writing to the PHY\n");
+ }
print_mip405_rev ();
show_stdio_dev ();
check_env ();
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- ppc/ppcstring.o (.text)
- ppc/vsprintf.o (.text)
- ppc/crc32.o (.text)
- ppc/zlib.o (.text)
-
- . = env_offset;
- common/environment.o(.text)
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
-
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- ppc/vsprintf.o (.text)
- ppc/crc32.o (.text)
-
- . = env_offset;
- common/environment.o(.text)
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
-
--- /dev/null
+#
+# (C) Copyright 2000, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := wepep250.o flash.o
+SOBJS := memsetup.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- /dev/null
+#
+# This is config used for compilation of WEP EP250 sources
+#
+# You might change location of U-Boot in memory by setting right TEXT_BASE.
+# This allows for example having one copy located at the end of ram and stored
+# in flash device and later on while developing use other location to test
+# the code in RAM device only.
+#
+
+TEXT_BASE = 0xa1fe0000
+#TEXT_BASE = 0xa1001000
\ No newline at end of file
--- /dev/null
+/*
+ * Copyright (C) 2003 ETC s.r.o.
+ *
+ * This code was inspired by Marius Groeger and Kyle Harris code
+ * available in other board ports for U-Boot
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Written by Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ */
+
+#include <common.h>
+#include "intel.h"
+
+
+/*
+ * This code should handle CFI FLASH memory device. This code is very
+ * minimalistic approach without many essential error handling code as well.
+ * Because U-Boot actually is missing smart handling of FLASH device,
+ * we just set flash_id to anything else to FLASH_UNKNOW, so common code
+ * can call us without any restrictions.
+ * TODO: Add CFI Query, to be able to determine FLASH device.
+ * TODO: Add error handling code
+ * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but
+ * hopefully may work with other configurations.
+ */
+
+#if ( WEP_FLASH_BUS_WIDTH == 1 )
+# define FLASH_BUS vu_char
+# if ( WEP_FLASH_INTERLEAVE == 1 )
+# define FLASH_CMD( x ) x
+# else
+# error "With 8bit bus only one chip is allowed"
+# endif
+
+
+#elif ( WEP_FLASH_BUS_WIDTH == 2 )
+# define FLASH_BUS vu_short
+# if ( WEP_FLASH_INTERLEAVE == 1 )
+# define FLASH_CMD( x ) x
+# elif ( WEP_FLASH_INTERLEAVE == 2 )
+# define FLASH_CMD( x ) (( x << 8 )| x )
+# else
+# error "With 16bit bus only 1 or 2 chip(s) are allowed"
+# endif
+
+
+#elif ( WEP_FLASH_BUS_WIDTH == 4 )
+# define FLASH_BUS vu_long
+# if ( WEP_FLASH_INTERLEAVE == 1 )
+# define FLASH_CMD( x ) x
+# elif ( WEP_FLASH_INTERLEAVE == 2 )
+# define FLASH_CMD( x ) (( x << 16 )| x )
+# elif ( WEP_FLASH_INTERLEAVE == 4 )
+# define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x )
+# else
+# error "With 32bit bus only 1,2 or 4 chip(s) are allowed"
+# endif
+
+#else
+# error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration"
+#endif
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+static FLASH_BUS flash_status_reg (void)
+{
+
+ FLASH_BUS *addr = (FLASH_BUS *) 0;
+
+ *addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
+
+ return *addr;
+}
+
+static int flash_ready (ulong timeout)
+{
+ int ok = 1;
+
+ reset_timer_masked ();
+ while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) !=
+ FLASH_CMD (CFI_INTEL_SR_READY)) {
+ if (get_timer_masked () > timeout && timeout != 0) {
+ ok = 0;
+ break;
+ }
+ }
+ return ok;
+}
+
+#if ( CFG_MAX_FLASH_BANKS != 1 )
+# error "WEP platform has only one flash bank!"
+#endif
+
+
+ulong flash_init (void)
+{
+ int i;
+ FLASH_BUS address = WEP_FLASH_BASE;
+
+ flash_info[0].size = WEP_FLASH_BANK_SIZE;
+ flash_info[0].sector_count = CFG_MAX_FLASH_SECT;
+ flash_info[0].flash_id = INTEL_MANUFACT;
+ memset (flash_info[0].protect, 0, CFG_MAX_FLASH_SECT);
+
+ for (i = 0; i < CFG_MAX_FLASH_SECT; i++) {
+ flash_info[0].start[i] = address;
+#ifdef WEP_FLASH_UNLOCK
+ /* Some devices are hw locked after start. */
+ *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP);
+ *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK);
+ flash_ready (0);
+ *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+#endif
+ address += WEP_FLASH_SECT_SIZE;
+ }
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+ &flash_info[0]);
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+ return WEP_FLASH_BANK_SIZE;
+}
+
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ printf (" Intel vendor\n");
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if (!(i % 5)) {
+ printf ("\n");
+ }
+
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+}
+
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ int flag, non_protected = 0, sector;
+ int rc = ERR_OK;
+
+ FLASH_BUS *address;
+
+ for (sector = s_first; sector <= s_last; sector++) {
+ if (!info->protect[sector]) {
+ non_protected++;
+ }
+ }
+
+ if (!non_protected) {
+ return ERR_PROTECTED;
+ }
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ flag = disable_interrupts ();
+
+
+ /* Start erase on unprotected sectors */
+ for (sector = s_first; sector <= s_last && !ctrlc (); sector++) {
+ if (info->protect[sector]) {
+ printf ("Protected sector %2d skipping...\n", sector);
+ continue;
+ } else {
+ printf ("Erasing sector %2d ... ", sector);
+ }
+
+ address = (FLASH_BUS *) (info->start[sector]);
+
+ *address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE);
+ *address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM);
+ if (flash_ready (CFG_FLASH_ERASE_TOUT)) {
+ *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
+ printf ("ok.\n");
+ } else {
+ *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
+ rc = ERR_TIMOUT;
+ printf ("timeout! Aborting...\n");
+ break;
+ }
+ *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+ }
+ if (ctrlc ())
+ printf ("User Interrupt!\n");
+
+ /* allow flash to settle - wait 10 ms */
+ udelay_masked (10000);
+ if (flag) {
+ enable_interrupts ();
+ }
+
+ return rc;
+}
+
+static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data)
+{
+ FLASH_BUS *address = (FLASH_BUS *) dest;
+ int rc = ERR_OK;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*address & data) != data) {
+ return ERR_NOT_ERASED;
+ }
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+
+ flag = disable_interrupts ();
+
+ *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
+ *address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1);
+ *address = data;
+
+ if (!flash_ready (CFG_FLASH_WRITE_TOUT)) {
+ *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
+ rc = ERR_TIMOUT;
+ printf ("timeout! Aborting...\n");
+ }
+
+ *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+ if (flag) {
+ enable_interrupts ();
+ }
+
+ return rc;
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong read_addr, write_addr;
+ FLASH_BUS data;
+ int i, result = ERR_OK;
+
+
+ read_addr = addr & ~(sizeof (FLASH_BUS) - 1);
+ write_addr = read_addr;
+ if (read_addr != addr) {
+ data = 0;
+ for (i = 0; i < sizeof (FLASH_BUS); i++) {
+ if (read_addr < addr || cnt == 0) {
+ data |= *((uchar *) read_addr) << i * 8;
+ } else {
+ data |= (*src++) << i * 8;
+ cnt--;
+ }
+ read_addr++;
+ }
+ if ((result = write_data (info, write_addr, data)) != ERR_OK) {
+ return result;
+ }
+ write_addr += sizeof (FLASH_BUS);
+ }
+ for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) {
+ if ((result = write_data (info, write_addr,
+ *((FLASH_BUS *) src))) != ERR_OK) {
+ return result;
+ }
+ write_addr += sizeof (FLASH_BUS);
+ src += sizeof (FLASH_BUS);
+ }
+ if (cnt > 0) {
+ read_addr = write_addr;
+ data = 0;
+ for (i = 0; i < sizeof (FLASH_BUS); i++) {
+ if (cnt > 0) {
+ data |= (*src++) << i * 8;
+ cnt--;
+ } else {
+ data |= *((uchar *) read_addr) << i * 8;
+ }
+ read_addr++;
+ }
+ if ((result = write_data (info, write_addr, data)) != 0) {
+ return result;
+ }
+ }
+ return ERR_OK;
+}
--- /dev/null
+/*
+ * Copyright (C) 2002 ETC s.r.o.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the ETC s.r.o. nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Written by Marcel Telka <marcel@telka.sk>, 2002.
+ *
+ * Documentation:
+ * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A,
+ * 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011
+ * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18,
+ * 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005
+ *
+ * This file is taken from OpenWinCE project hosted by SourceForge.net
+ *
+ */
+
+#ifndef FLASH_INTEL_H
+#define FLASH_INTEL_H
+
+#include <common.h>
+
+/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */
+
+#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */
+
+/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */
+
+#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */
+
+/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */
+
+#define CFI_CHIP_INTEL_28F320J3A 0x0016
+#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A"
+#define CFI_CHIP_INTEL_28F640J3A 0x0017
+#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A"
+#define CFI_CHIP_INTEL_28F128J3A 0x0018
+#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A"
+
+/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */
+
+#define CFI_CHIP_INTEL_28F640K3 0x8801
+#define CFI_CHIPN_INTEL_28F640K3 "28F640K3"
+#define CFI_CHIP_INTEL_28F128K3 0x8802
+#define CFI_CHIPN_INTEL_28F128K3 "28F128K3"
+#define CFI_CHIP_INTEL_28F256K3 0x8803
+#define CFI_CHIPN_INTEL_28F256K3 "28F256K3"
+#define CFI_CHIP_INTEL_28F640K18 0x8805
+#define CFI_CHIPN_INTEL_28F640K18 "28F640K18"
+#define CFI_CHIP_INTEL_28F128K18 0x8806
+#define CFI_CHIPN_INTEL_28F128K18 "28F128K18"
+#define CFI_CHIP_INTEL_28F256K18 0x8807
+#define CFI_CHIPN_INTEL_28F256K18 "28F256K18"
+
+#endif /* FLASH_INTEL_H */
+
--- /dev/null
+/*
+ * Copyright (C) 2001, 2002 ETC s.r.o.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ * 02111-1307, USA.
+ *
+ * Written by Marcel Telka <marcel@telka.sk>, 2001, 2002.
+ * Changes for U-Boot Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ * This file is taken from OpenWinCE project hosted by SourceForge.net
+ *
+ * Documentation:
+ * [1] Intel Corporation, "Intel PXA250 and PXA210 Application Processors
+ * Developer's Manual", February 2002, Order Number: 278522-001
+ * [2] Samsung Electronics, "8Mx16 SDRAM 54CSP K4S281633D-RL/N/P",
+ * Revision 1.0, February 2002
+ * [3] Samsung Electronics, "16Mx16 SDRAM 54CSP K4S561633C-RL(N)",
+ * Revision 1.0, February 2002
+ *
+*/
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+
+.globl memsetup
+memsetup:
+
+ mov r10, lr
+
+/* setup memory - see 6.12 in [1]
+ * Step 1 - wait 200 us
+ */
+ mov r0,#0x2700 /* wait 200 us @ 99.5 MHz */
+1: subs r0, r0, #1
+ bne 1b
+/* TODO: complete step 1 for Synchronous Static memory*/
+
+ ldr r0, =0x48000000 /* MC_BASE */
+
+
+
+/* step 1.a - setup MSCx
+ */
+ ldr r1, =0x000012B3 /* MSC0_RRR0(1) | MSC0_RDN0(2) | MSC0_RDF0(11) | MSC0_RT0(3) */
+ str r1, [r0, #0x8] /* MSC0_OFFSET */
+
+/* step 1.c - clear MDREFR:K1FREE, set MDREFR:DRI
+ * see AUTO REFRESH chapter in section D. in [2] and in [3]
+ * DRI = (64ms / 4096) * 99.53MHz / 32 = 48 for K4S281633
+ * DRI = (64ms / 8192) * 99.52MHz / 32 = 24 for K4S561633
+ * TODO: complete for Synchronous Static memory
+ */
+ ldr r1, [r0, #4] /* MDREFR_OFFSET */
+ ldr r2, =0x01000FFF /* MDREFR_K1FREE | MDREFR_DRI_MASK */
+ bic r1, r1, r2
+#if defined( WEP_SDRAM_K4S281633 )
+ orr r1, r1, #48 /* MDREFR_DRI(48) */
+#elif defined( WEP_SDRAM_K4S561633 )
+ orr r1, r1, #24 /* MDREFR_DRI(24) */
+#else
+#error SDRAM chip is not defined
+#endif
+
+ str r1, [r0, #4] /* MDREFR_OFFSET */
+
+/* Step 2 - only for Synchronous Static memory (TODO)
+ *
+ * Step 3 - same as step 4
+ *
+ * Step 4
+ *
+ * Step 4.a - set MDREFR:K1RUN, clear MDREFR:K1DB2
+ */
+ orr r1, r1, #0x00010000 /* MDREFR_K1RUN */
+ bic r1, r1, #0x00020000 /* MDREFR_K1DB2 */
+ str r1, [r0, #4] /* MDREFR_OFFSET */
+
+/* Step 4.b - clear MDREFR:SLFRSH */
+ bic r1, r1, #0x00400000 /* MDREFR_SLFRSH */
+ str r1, [r0, #4] /* MDREFR_OFFSET */
+
+/* Step 4.c - set MDREFR:E1PIN */
+ orr r1, r1, #0x00008000 /* MDREFR_E1PIN */
+ str r1, [r0, #4] /* MDREFR_OFFSET */
+
+/* Step 4.d - automatically done
+ *
+ * Steps 4.e and 4.f - configure SDRAM
+ */
+#if defined( WEP_SDRAM_K4S281633 )
+ ldr r1, =0x00000AA8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(1) | MDCNFG_DNB0 */
+#elif defined( WEP_SDRAM_K4S561633 )
+ ldr r1, =0x00000AC8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(2) | MDCNFG_DNB0 */
+#else
+#error SDRAM chip is not defined
+#endif
+ str r1, [r0, #0] /* MDCNFG_OFFSET */
+
+/* Step 5 - wait at least 200 us for SDRAM
+ * see section B. in [2]
+ */
+ mov r2,#0x2700 /* wait 200 us @ 99.5 MHz */
+1: subs r2, r2, #1
+ bne 1b
+
+/* Step 6 - after reset dcache is disabled, so automatically done
+ *
+ * Step 7 - eight refresh cycles
+ */
+ mov r2, #0xA0000000
+ ldr r3, [r2]
+ ldr r3, [r2]
+ ldr r3, [r2]
+ ldr r3, [r2]
+ ldr r3, [r2]
+ ldr r3, [r2]
+ ldr r3, [r2]
+ ldr r3, [r2]
+
+/* Step 8 - we don't need dcache now
+ *
+ * Step 9 - enable SDRAM partition 0
+ */
+ orr r1, r1, #1 /* MDCNFG_DE0 */
+ str r1, [r0, #0] /* MDCNFG_OFFSET */
+
+/* Step 10 - write MDMRS */
+ mov r1, #0
+ str r1, [r0, #0x40] /* MDMRS_OFFSET */
+
+/* Step 11 - optional (TODO) */
+
+ mov pc,r10
+
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/xscale/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ armboot_end_data = .;
+
+ . = ALIGN(4);
+ bss_start = .;
+ .bss : { *(.bss) }
+ bss_end = .;
+
+ armboot_end = .;
+}
--- /dev/null
+/*
+ * Copyright (C) 2003 ETC s.r.o.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Written by Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/pxa-regs.h>
+
+int board_init( void ){
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_arch_number = 288;
+ gd->bd->bi_boot_params = 0xa0000000;
+/*
+ * Setup GPIO stuff to get serial working
+ */
+#if defined( CONFIG_FFUART )
+ GPDR1 = 0x80;
+ GAFR1_L = 0x8010;
+#elif defined( CONFIG_BTUART )
+ GPDR1 = 0x800;
+ GAFR1_L = 0x900000;
+#endif
+ PSSR = 0x20;
+
+/*
+ * Following code is just bug workaround, remove it if not neccessary
+ */
+
+ /* cpu/xscale/cpu.c do not set armboot_real_end that is used for
+ malloc pool.*/
+ if( _armboot_real_end == 0xbadc0de ){
+ _armboot_real_end = _armboot_end;
+ }
+ return 0;
+}
+
+int dram_init( void ){
+ DECLARE_GLOBAL_DATA_PTR;
+
+#if ( CONFIG_NR_DRAM_BANKS > 0 )
+ gd->bd->bi_dram[0].start = WEP_SDRAM_1;
+ gd->bd->bi_dram[0].size = WEP_SDRAM_1_SIZE;
+#endif
+#if ( CONFIG_NR_DRAM_BANKS > 1 )
+ gd->bd->bi_dram[1].start = WEP_SDRAM_2;
+ gd->bd->bi_dram[1].size = WEP_SDRAM_2_SIZE;
+#endif
+#if ( CONFIG_NR_DRAM_BANKS > 2 )
+ gd->bd->bi_dram[2].start = WEP_SDRAM_3;
+ gd->bd->bi_dram[2].size = WEP_SDRAM_3_SIZE;
+#endif
+#if ( CONFIG_NR_DRAM_BANKS > 3 )
+ gd->bd->bi_dram[3].start = WEP_SDRAM_4;
+ gd->bd->bi_dram[3].size = WEP_SDRAM_4_SIZE;
+#endif
+
+ return 0;
+}
+
"Sun", "Mon", "Tues", "Wednes", "Thurs", "Fri", "Satur",
};
+#define RELOC(a) ((typeof(a))((unsigned long)(a) + gd->reloc_off))
+
int mk_date (char *, struct rtc_time *);
int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
+ DECLARE_GLOBAL_DATA_PTR;
struct rtc_time tm;
int rcode = 0;
printf ("Date: %4d-%02d-%02d (%sday) Time: %2d:%02d:%02d\n",
tm.tm_year, tm.tm_mon, tm.tm_mday,
(tm.tm_wday<0 || tm.tm_wday>6) ?
- "unknown " : weekdays[tm.tm_wday],
+ "unknown " : RELOC(weekdays[tm.tm_wday]),
tm.tm_hour, tm.tm_min, tm.tm_sec);
return 0;
* should handle if, then, elif, else, fi, for, while, until, do, done.
* case, function, and select are obnoxious, save those for later.
*/
+struct reserved_combo {
+ char *literal;
+ int code;
+ long flag;
+};
+/* Mostly a list of accepted follow-up reserved words.
+ * FLAG_END means we are done with the sequence, and are ready
+ * to turn the compound list into a command.
+ * FLAG_START means the word must start a new compound list.
+ */
+static struct reserved_combo reserved_list[] = {
+ { "if", RES_IF, FLAG_THEN | FLAG_START },
+ { "then", RES_THEN, FLAG_ELIF | FLAG_ELSE | FLAG_FI },
+ { "elif", RES_ELIF, FLAG_THEN },
+ { "else", RES_ELSE, FLAG_FI },
+ { "fi", RES_FI, FLAG_END },
+ { "for", RES_FOR, FLAG_IN | FLAG_START },
+ { "while", RES_WHILE, FLAG_DO | FLAG_START },
+ { "until", RES_UNTIL, FLAG_DO | FLAG_START },
+ { "in", RES_IN, FLAG_DO },
+ { "do", RES_DO, FLAG_DONE },
+ { "done", RES_DONE, FLAG_END }
+};
+#define NRES (sizeof(reserved_list)/sizeof(struct reserved_combo))
+
int reserved_word(o_string *dest, struct p_context *ctx)
{
- struct reserved_combo {
- char *literal;
- int code;
- long flag;
- };
- /* Mostly a list of accepted follow-up reserved words.
- * FLAG_END means we are done with the sequence, and are ready
- * to turn the compound list into a command.
- * FLAG_START means the word must start a new compound list.
- */
- static struct reserved_combo reserved_list[] = {
- { "if", RES_IF, FLAG_THEN | FLAG_START },
- { "then", RES_THEN, FLAG_ELIF | FLAG_ELSE | FLAG_FI },
- { "elif", RES_ELIF, FLAG_THEN },
- { "else", RES_ELSE, FLAG_FI },
- { "fi", RES_FI, FLAG_END },
- { "for", RES_FOR, FLAG_IN | FLAG_START },
- { "while", RES_WHILE, FLAG_DO | FLAG_START },
- { "until", RES_UNTIL, FLAG_DO | FLAG_START },
- { "in", RES_IN, FLAG_DO },
- { "do", RES_DO, FLAG_DONE },
- { "done", RES_DONE, FLAG_END }
- };
struct reserved_combo *r;
for (r=reserved_list;
-#define NRES sizeof(reserved_list)/sizeof(struct reserved_combo)
r<reserved_list+NRES; r++) {
if (strcmp(dest->data, r->literal) == 0) {
debug_printf("found reserved word %s, code %d\n",r->literal,r->code);
}
#ifdef __U_BOOT__
+static void u_boot_hush_reloc(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned long addr;
+ struct reserved_combo *r;
+
+ for (r=reserved_list; r<reserved_list+NRES; r++) {
+ addr = (ulong) (r->literal) + gd->reloc_off;
+ r->literal = (char *)addr;
+ }
+}
+
int u_boot_hush_start(void)
{
top_vars = malloc(sizeof(struct variables));
top_vars->next = 0;
top_vars->flg_export = 0;
top_vars->flg_read_only = 1;
+ u_boot_hush_reloc();
return 0;
}
int do_run (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
int i;
- int rcode = 1;
if (argc < 2) {
printf ("Usage:\n%s\n", cmdtp->usage);
}
for (i=1; i<argc; ++i) {
+ char *arg;
+
+ if ((arg = getenv (argv[i])) == NULL) {
+ printf ("## Error: \"%s\" not defined\n", argv[i]);
+ return 1;
+ }
#ifndef CFG_HUSH_PARSER
- if (run_command (getenv (argv[i]), flag) != -1) ++rcode;
+ if (run_command (arg, flag) == -1)
+ return 1;
#else
- if (parse_string_outer(getenv (argv[i]),
- FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP) == 0) ++rcode;
+ if (parse_string_outer(arg,
+ FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP) == 0)
+ return 1;
#endif
}
- return ((rcode == i) ? 0 : 1);
+ return 0;
}
-#endif
+#endif /* CFG_CMD_RUN */
.globl mips_cache_lock
.ent mips_cache_lock
mips_cache_lock:
- li a1, K0BASE - CFG_DCACHE_SIZE
+ li a1, K0BASE - CFG_DCACHE_SIZE/2
addu a0, a1
- li a2, CFG_DCACHE_SIZE
+ li a2, CFG_DCACHE_SIZE/2
li a3, CFG_CACHELINE_SIZE
move a1, a2
icacheop(a0,a1,a2,a3,0x1d)
int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
-#ifdef CONFIG_INCA_IP
+#if defined(CONFIG_INCA_IP)
*INCA_IP_WDT_RST_REQ = 0x3f;
+#elif defined(CONFIG_PURPLE)
+ void (*f)(void) = (void *) 0xbfc00000;
+
+ f();
#endif
fprintf(stderr, "*** reset failed ***\n");
return 0;
* (INCA) ASC UART support
*/
+#include <config.h>
+
+#ifdef CONFIG_PURPLE
+#define serial_init asc_serial_init
+#define serial_putc asc_serial_putc
+#define serial_puts asc_serial_puts
+#define serial_getc asc_serial_getc
+#define serial_tstc asc_serial_tstc
+#define serial_setbrg asc_serial_setbrg
+#endif
+
#include <common.h>
#include <asm/inca-ip.h>
#include "serial.h"
+#ifdef CONFIG_PURPLE
+
+#undef ASC_FIFO_PRESENT
+#define TOUT_LOOP 100000
+
+/* Set base address for second FPI interrupt control register bank */
+#define SFPI_INTCON_BASEADDR 0xBF0F0000
+
+/* Register offset from base address */
+#define FBS_ISR 0x00000000 /* Interrupt status register */
+#define FBS_IMR 0x00000008 /* Interrupt mask register */
+#define FBS_IDIS 0x00000010 /* Interrupt disable register */
+
+/* Interrupt status register bits */
+#define FBS_ISR_AT 0x00000040 /* ASC transmit interrupt */
+#define FBS_ISR_AR 0x00000020 /* ASC receive interrupt */
+#define FBS_ISR_AE 0x00000010 /* ASC error interrupt */
+#define FBS_ISR_AB 0x00000008 /* ASC transmit buffer interrupt */
+#define FBS_ISR_AS 0x00000004 /* ASC start of autobaud detection interrupt */
+#define FBS_ISR_AF 0x00000002 /* ASC end of autobaud detection interrupt */
+
+#else
+
+#define ASC_FIFO_PRESENT
+
+#endif
+
+
#define SET_BIT(reg, mask) reg |= (mask)
#define CLEAR_BIT(reg, mask) reg &= (~mask)
#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask)
int serial_init (void)
{
+#ifdef CONFIG_INCA_IP
/* we have to set PMU.EN13 bit to enable an ASC device*/
INCAASC_PMU_ENABLE(13);
+#endif
/* and we have to set CLC register*/
CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS);
/* select input port */
pAsc->asc_pisel = (CONSOLE_TTY & 0x1);
+#ifdef ASC_FIFO_PRESENT
/* TXFIFO's filling level */
SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK,
ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL);
ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL);
/* enable RXFIFO */
SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN);
+#endif
/* enable error signals */
SET_BIT(pAsc->asc_con, ASCCON_FEN);
SET_BIT(pAsc->asc_con, ASCCON_OEN);
+#ifdef CONFIG_INCA_IP
/* acknowledge ASC interrupts */
ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL);
/* disable ASC interrupts */
ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL);
+#endif
+#ifdef ASC_FIFO_PRESENT
/* set FIFOs into the transparent mode */
SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN);
SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN);
+#endif
/* set baud rate */
serial_setbrg();
ulong uiReloadValue, fdv;
ulong f_ASC;
+#ifdef CONFIG_INCA_IP
f_ASC = incaip_get_fpiclk();
+#else
+ f_ASC = ASC_CLOCK_RATE;
+#endif
#ifndef INCAASC_USE_FDV
fdv = 2;
void serial_putc (const char c)
{
+#ifdef ASC_FIFO_PRESENT
uint txFl = 0;
+#else
+ uint timeout = 0;
+#endif
if (c == '\n') serial_putc ('\r');
+#ifdef ASC_FIFO_PRESENT
/* check do we have a free space in the TX FIFO */
/* get current filling level */
do
txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF;
}
while ( txFl == INCAASC_TXFIFO_FULL );
+#else
+
+ while(!(*(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) &
+ FBS_ISR_AB))
+ {
+ if (timeout++ > TOUT_LOOP)
+ {
+ break;
+ }
+ }
+#endif
pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */
+
+#ifndef ASC_FIFO_PRESENT
+ *(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) = FBS_ISR_AB |
+ FBS_ISR_AT;
+#endif
+
/* check for errors */
if ( pAsc->asc_con & ASCCON_OE )
{
c = (char)(pAsc->asc_rbuf & symbol_mask);
+#ifndef ASC_FIFO_PRESENT
+ *(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) = FBS_ISR_AR;
+#endif
+
return c;
}
{
int res = 1;
+#ifdef ASC_FIFO_PRESENT
if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 )
{
res = 0;
}
+#else
+ if (!(*(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) &
+ FBS_ISR_AR))
+
+ {
+ res = 0;
+ }
+#endif
else if ( pAsc->asc_con & ASCCON_FE )
{
SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE);
_start:
RVECENT(reset,0) /* U-boot entry point */
RVECENT(reset,1) /* software reboot */
-#ifdef CONFIG_INCA_IP
- .word 0x000020C4 /* EBU init code, fetched during booting */
- .word 0x00000000 /* phase of the flash */
+#if defined(CONFIG_INCA_IP)
+ .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
+ .word 0x00000000 /* phase of the flash */
+#elif defined(CONFIG_PURPLE)
+ .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
+ .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
#else
RVECENT(romReserved,2)
#endif
* 128 * 8 == 1024 == 0x400
* so this is address R_VEC+0x400 == 0xbfc00400
*/
+#ifdef CONFIG_PURPLE
+/* 0xbfc00400 */
+ .word 0xdc870000
+ .word 0xfca70000
+ .word 0x20840008
+ .word 0x20a50008
+ .word 0x20c6ffff
+ .word 0x14c0fffa
+ .word 0x00000000
+ .word 0x03e00008
+ .word 0x00000000
+ .word 0x00000000
+/* 0xbfc00428 */
+ .word 0xdc870000
+ .word 0xfca70000
+ .word 0x20840008
+ .word 0x20a50008
+ .word 0x20c6ffff
+ .word 0x14c0fffa
+ .word 0x00000000
+ .word 0x03e00008
+ .word 0x00000000
+ .word 0x00000000
+#endif /* CONFIG_PURPLE */
.align 4
reset:
* t1 = target address
* t2 = source end address
*/
+ /* On the purple board we copy the code earlier in a special way
+ * in order to solve flash problems
+ */
+#ifndef CONFIG_PURPLE
1:
lw t3, 0(t0)
sw t3, 0(t1)
addu t0, 4
ble t0, t2, 1b
addu t1, 4 /* delay slot */
+#endif
/* If caches were enabled, we would have to flush them here.
*/
FFIER = IER_UUE; /* Enable FFUART */
-#elif CONFIG_STUART
+#elif defined(CONFIG_BTUART)
+ CKEN |= CKEN7_BTUART;
+
+ BTIER = 0;
+ BTFCR = 0;
+
+ /* set baud rate */
+ BTLCR = LCR_DLAB;
+ BTDLL = quot & 0xff;
+ BTDLH = quot >> 8;
+ BTLCR = LCR_WLS0 | LCR_WLS1;
+
+ BTIER = IER_UUE; /* Enable BFUART */
+
+#elif defined(CONFIG_STUART)
#error "Bad: not implemented yet!"
#else
#error "Bad: you didn't configured serial ..."
while ((FFLSR & LSR_TEMT) == 0);
FFTHR = c;
-#elif CONFIG_STUART
+#elif defined(CONFIG_BTUART)
+ while ((BTLSR & LSR_TEMT ) == 0 );
+ BTTHR = c;
+#elif defined(CONFIG_STUART)
#endif
/* If \n, also do \r */
{
#ifdef CONFIG_FFUART
return FFLSR & LSR_DR;
-#elif CONFIG_STUART
+#elif defined(CONFIG_BTUART)
+ return BTLSR & LSR_DR;
+#elif defined(CONFIG_STUART)
#endif
}
while (!(FFLSR & LSR_DR));
return (char) FFRBR & 0xff;
-#elif CONFIG_STUART
+#elif defined(CONFIG_BTUART)
+ while (!(BTLSR & LSR_DR));
+
+ return (char) BTRBR & 0xff;
+#elif defined(CONFIG_STUART)
#endif
}
!!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A IBM 4xx BUG!!!
This reset edge condition could possibly be present in every I2C
-controller and device available. We should probably have a bus reset
-function for all our target CPUs.
+controller and device available. For boards where a I2C bus reset
+function can be implemented a i2c_init_board() function should be
+provided and enabled by #define'ing CFG_I2C_INIT_BOARD in your
+board's config file. Note that this is NOT necessary when using the
+bit-banging I2C driver (common/soft_i2c.c) as this already includes
+the I2C bus reset sequence.
+
Many thanks to Bill Hunter for finding this serious BUG.
email to: <williamhunter@attbi.com>
--- /dev/null
+
+Flash programming on the INCA-IP board is complicated because of the
+EBU swapping unit. A BDI2000 can be used for flash programming only
+if the EBU swapping unit is enabled; otherwise it will not detect the
+flash memory. But the EBU swapping unit is disadbled after reset, so
+if you program some code to flash with the swapping unit on, it will
+not be runnable with the swapping unit off.
+
+The consequence is that you have to write a pre-swapped image to
+flash using the BDI2000. A simple host-side tool "inca-swap-bytes" is
+provided in the "tools/" directory. Use it as follows:
+
+ bash$ ./inca-swap-bytes <u-boot.bin >u-boot.bin.swp
+
+Note that the current BDI config file _disables_ the EBU swapping
+unit for the flash bank 0. To enable it, (this is required for the
+BDI flash commands to work) uncomment the following line in the
+config file:
+
+ ;WM32 0xb8000260 0x404161ff ; Swapping unit enabled
+
+and comment out
+
+ WM32 0xb8000260 0x004161ff ; Swapping unit disabled
+
+Alternatively, you can use "mm 0xb8000260 <value>" commands to
+enable/disable the swapping unit manually.
+
+Just for reference, here is the complete sequence of actions we took
+to install a U-Boot image into flash.
+
+ 1. ./inca-swap-bytes <u-boot.bin >u-boot.bin.swp
+
+ 2. From BDI:
+
+ mm 0xb8000260 0x404161ff
+ erase 0xb0000000
+ erase 0xb0010000
+ prog 0xb0000000 /tftpboot/INCA/u-boot.bin.swp bin
+ mm 0xb8000260 0x004161ff
+ go 0xb0000000
+
+
+(C) 2003 Wolfgang Denk
--- /dev/null
+(C) 2003 Arun Dharankar <ADharankar@ATTBI.Com>
+
+Attached is an IDMA example code for MPC8260/PPCBoot. I had tried to
+search around and could not find any for implementing IDMA, so
+implemented one. Its not coded in the best way, but works.
+
+Also, I was able to test the IDMA specific code under Linux also
+(with modifications). My requirement was to implement it for
+CompactFlash implemented in memory mode, and it works for it under
+PPCBoot and Linux.
--- /dev/null
+Notes on the scheduler in sched.c:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ 'sched.c' provides an very simplistic multi-threading scheduler.
+ See the example, function 'sched(...)', in the same file for its
+ API usage.
+
+ Until an exhaustive testing can be done, the implementation cannot
+ qualify as that of production quality. It works with the example
+ in 'sched.c', it may or may not work in other cases.
+
+
+Limitations:
+~~~~~~~~~~~~
+
+ - There are NO primitives for thread synchronization (locking,
+ notify etc).
+
+ - Only the GPRs and FPRs context is saved during a thread context
+ switch. Other registers on the PowerPC processor (60x, 7xx, 7xxx
+ etc) are NOT saved.
+
+ - The scheduler is NOT transparent to the user. The user
+ applications must invoke thread_yield() to allow other threads to
+ scheduler.
+
+ - There are NO priorities, and the scheduling policy is round-robin
+ based.
+
+ - There are NO capabilities to collect thread CPU usage, scheduler
+ stats, thread status etc.
+
+ - The semantics are somewhat based on those of pthreads, but NOT
+ the same.
+
+ - Only seven threads are allowed. These can be easily increased by
+ changing "#define MAX_THREADS" depending on the available memory.
+
+ - The stack size of each thread is 8KBytes. This can be easily
+ increased depending on the requirement and the available memory,
+ by increasing "#define STK_SIZE".
+
+ - Only one master/parent thread is allowed, and it cannot be
+ stopped or deleted. Any given thread is NOT allowed to stop or
+ delete itself.
+
+ - There NOT enough safety checks as are probably in the other
+ threads implementations.
+
+ - There is no parent-child relationship between threads. Only one
+ thread may thread_join, preferably the master/parent thread.
+
+(C) 2003 Arun Dharankar <ADharankar@ATTBI.Com>
unsigned int m, n, vld, pd, PD, fref, xr_cb;
unsigned int fvcomin, fvcomax, pclckmin, pclckmax, pclk;
unsigned int pfreq, fvco, new_pixclock;
+ unsigned int D,nback,mback;
fref = VIDEO_FREF;
pd = 1;
PD++;
}
/* fvco is exactly pd * pixelclock and higher than the ninmal VCO frequency */
- vld = (param->vld_set > param->vld_not_set) ?
- param->vld_not_set : param->vld_set;
- /* start with lower VLD (higher VLD is NOT yet implemented */
- FindBestPQFittingMN (fvco / vld, fref, param->mn_min, param->mn_max, &m, &n); /* rds = 1 */
+ /* first try */
+ vld = param->vld_set;
+ D=FindBestPQFittingMN (fvco / vld, fref, param->mn_min, param->mn_max, &m, &n); /* rds = 1 */
+ mback=m;
+ nback=n;
+ /* second try */
+ vld = param->vld_not_set;
+ if(D<FindBestPQFittingMN (fvco / vld, fref, param->mn_min, param->mn_max, &m, &n)) { /* rds = 1 */
+ /* first try was better */
+ m=mback;
+ n=nback;
+ vld = param->vld_set;
+ }
m += param->mn_diff;
n += param->mn_diff;
PRINTF ("VCO %d, pd %d, m %d n %d vld %d \n", fvco, pd, m, n, vld);
BIN += sched.bin
endif
-ifeq ($(CPU),mips)
+ifeq ($(ARCH),mips)
SREC =
BIN =
endif
BIN += timer.bin
endif
+# The following example is 8260 specific...
+ifeq ($(CPU),mpc8260)
+SREC += mem_to_mem_idma2intr.srec
+BIN += mem_to_mem_idma2intr.bin
+endif
+
# Utility for resetting i82559 EEPROM
ifeq ($(BOARD),oxc)
SREC += eepro100_eeprom.srec
--- /dev/null
+/* The dpalloc function used and implemented in this file was derieved
+ * from PPCBoot/U-Boot file "cpu/mpc8260/commproc.c".
+ */
+
+/* Author: Arun Dharankar <ADharankar@ATTBI.Com>
+ * This example is meant to only demonstrate how the IDMA could be used.
+ */
+
+/*
+ * This file is based on "arch/ppc/8260_io/commproc.c" - here is it's
+ * copyright notice:
+ *
+ * General Purpose functions for the global management of the
+ * 8260 Communication Processor Module.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ * 2.3.99 Updates
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space. The allocator for that is here. When the communication
+ * process is reset, we reclaim the memory available. There is
+ * currently no deallocator for this memory.
+ */
+
+
+
+#include <common.h>
+#include <syscall.h>
+
+#define STANDALONE
+
+#ifndef STANDALONE /* Linked into/Part of PPCBoot */
+#include <command.h>
+#include <watchdog.h>
+#else /* Standalone app of PPCBoot */
+#include <syscall.h>
+#define printf mon_printf
+#define tstc mon_tstc
+#define getc mon_getc
+#define putc mon_putc
+#define udelay mon_udelay
+#define malloc mon_malloc
+#define WATCHDOG_RESET() { \
+ *(ushort *)(CFG_IMMR + 0x1000E) = 0x556c; \
+ *(ushort *)(CFG_IMMR + 0x1000E) = 0xaa39; \
+ }
+#endif /* STANDALONE */
+
+static int debug = 1;
+
+#define DEBUG(fmt, args...) { \
+ if(debug != 0) { \
+ printf("[%s %d %s]: ",__FILE__,__LINE__,__FUNCTION__); \
+ printf(fmt, ##args); \
+ } \
+}
+
+#define CPM_CR_IDMA1_SBLOCK (0x14)
+#define CPM_CR_IDMA2_SBLOCK (0x15)
+#define CPM_CR_IDMA3_SBLOCK (0x16)
+#define CPM_CR_IDMA4_SBLOCK (0x17)
+#define CPM_CR_IDMA1_PAGE (0x07)
+#define CPM_CR_IDMA2_PAGE (0x08)
+#define CPM_CR_IDMA3_PAGE (0x09)
+#define CPM_CR_IDMA4_PAGE (0x0a)
+#define PROFF_IDMA1_BASE ((uint)0x87fe)
+#define PROFF_IDMA2_BASE ((uint)0x88fe)
+#define PROFF_IDMA3_BASE ((uint)0x89fe)
+#define PROFF_IDMA4_BASE ((uint)0x8afe)
+
+#define CPM_CR_INIT_TRX ((ushort)0x0000)
+#define CPM_CR_FLG ((ushort)0x0001)
+
+#define mk_cr_cmd(PG, SBC, MCN, OP) \
+ ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
+
+
+#pragma pack(1)
+typedef struct ibdbits {
+ unsigned b_valid:1;
+ unsigned b_resv1:1;
+ unsigned b_wrap:1;
+ unsigned b_interrupt:1;
+ unsigned b_last:1;
+ unsigned b_resv2:1;
+ unsigned b_cm:1;
+ unsigned b_resv3:2;
+ unsigned b_sdn:1;
+ unsigned b_ddn:1;
+ unsigned b_dgbl:1;
+ unsigned b_dbo:2;
+ unsigned b_resv4:1;
+ unsigned b_ddtb:1;
+ unsigned b_resv5:2;
+ unsigned b_sgbl:1;
+ unsigned b_sbo:2;
+ unsigned b_resv6:1;
+ unsigned b_sdtb:1;
+ unsigned b_resv7:9;
+} ibdbits_t;
+
+#pragma pack(1)
+typedef union ibdbitsu {
+ ibdbits_t b;
+ uint i;
+} ibdbitsu_t;
+
+#pragma pack(1)
+typedef struct idma_buf_desc {
+ ibdbitsu_t ibd_bits; /* Status and Control */
+ uint ibd_datlen; /* Data length in buffer */
+ uint ibd_sbuf; /* Source buffer addr in host mem */
+ uint ibd_dbuf; /* Destination buffer addr in host mem */
+} ibd_t;
+
+
+#pragma pack(1)
+typedef struct dcmbits {
+ unsigned b_fb:1;
+ unsigned b_lp:1;
+ unsigned b_resv1:3;
+ unsigned b_tc2:1;
+ unsigned b_resv2:1;
+ unsigned b_wrap:3;
+ unsigned b_sinc:1;
+ unsigned b_dinc:1;
+ unsigned b_erm:1;
+ unsigned b_dt:1;
+ unsigned b_sd:2;
+} dcmbits_t;
+
+#pragma pack(1)
+typedef union dcmbitsu {
+ dcmbits_t b;
+ ushort i;
+} dcmbitsu_t;
+
+#pragma pack(1)
+typedef struct pram_idma {
+ ushort pi_ibase;
+ dcmbitsu_t pi_dcmbits;
+ ushort pi_ibdptr;
+ ushort pi_dprbuf;
+ ushort pi_bufinv; /* internal to CPM */
+ ushort pi_ssmax;
+ ushort pi_dprinptr; /* internal to CPM */
+ ushort pi_sts;
+ ushort pi_dproutptr; /* internal to CPM */
+ ushort pi_seob;
+ ushort pi_deob;
+ ushort pi_dts;
+ ushort pi_retadd;
+ ushort pi_resv1; /* internal to CPM */
+ uint pi_bdcnt;
+ uint pi_sptr;
+ uint pi_dptr;
+ uint pi_istate;
+} pram_idma_t;
+
+
+volatile immap_t *immap = (immap_t *) CFG_IMMR;
+volatile ibd_t *bdf;
+volatile pram_idma_t *piptr;
+
+volatile int dmadone;
+volatile int *dmadonep = &dmadone;
+void dmadone_handler (void *);
+
+int idma_init (void);
+void idma_start (int, int, int, uint, uint, int);
+uint dpalloc (uint, uint);
+
+
+uint dpinit_done = 0;
+
+
+#ifdef STANDALONE
+int ctrlc (void)
+{
+ if (mon_tstc()) {
+ switch (mon_getc ()) {
+ case 0x03: /* ^C - Control C */
+ return 1;
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+void * memset(void * s,int c,size_t count)
+{
+ char *xs = (char *) s;
+ while (count--)
+ *xs++ = c;
+ return s;
+}
+int memcmp(const void * cs,const void * ct,size_t count)
+{
+ const unsigned char *su1, *su2;
+ int res = 0;
+ for( su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
+ if ((res = *su1 - *su2) != 0)
+ break;
+ return res;
+}
+#endif /* STANDALONE */
+
+#ifdef STANDALONE
+int mem_to_mem_idma2intr (bd_t * bd, int argc, char *argv[])
+#else
+int do_idma (bd_t * bd, int argc, char *argv[])
+#endif /* STANDALONE */
+{
+ int i;
+
+ dpinit_done = 0;
+
+ idma_init ();
+
+ DEBUG ("Installing dma handler\n");
+ mon_install_hdlr (7, dmadone_handler, (void *) bdf);
+
+ memset ((void *) 0x100000, 'a', 512);
+ memset ((void *) 0x200000, 'b', 512);
+
+ for (i = 0; i < 32; i++) {
+ printf ("Startin IDMA, iteration=%d\n", i);
+ idma_start (1, 1, 512, 0x100000, 0x200000, 3);
+ }
+
+ DEBUG ("Uninstalling dma handler\n");
+ mon_free_hdlr (7);
+
+ return 0;
+}
+
+void
+idma_start (int sinc, int dinc, int sz, uint sbuf, uint dbuf, int ttype)
+{
+ /* ttype is for M-M, M-P, P-M or P-P: not used for now */
+
+ piptr->pi_istate = 0; /* manual says: clear it before every START_IDMA */
+ piptr->pi_dcmbits.b.b_resv1 = 0;
+
+ if (sinc == 1)
+ piptr->pi_dcmbits.b.b_sinc = 1;
+ else
+ piptr->pi_dcmbits.b.b_sinc = 0;
+
+ if (dinc == 1)
+ piptr->pi_dcmbits.b.b_dinc = 1;
+ else
+ piptr->pi_dcmbits.b.b_dinc = 0;
+
+ piptr->pi_dcmbits.b.b_erm = 0;
+ piptr->pi_dcmbits.b.b_sd = 0x00; /* M-M */
+
+ bdf->ibd_sbuf = sbuf;
+ bdf->ibd_dbuf = dbuf;
+ bdf->ibd_bits.b.b_cm = 0;
+ bdf->ibd_bits.b.b_interrupt = 1;
+ bdf->ibd_bits.b.b_wrap = 1;
+ bdf->ibd_bits.b.b_last = 1;
+ bdf->ibd_bits.b.b_sdn = 0;
+ bdf->ibd_bits.b.b_ddn = 0;
+ bdf->ibd_bits.b.b_dgbl = 0;
+ bdf->ibd_bits.b.b_ddtb = 0;
+ bdf->ibd_bits.b.b_sgbl = 0;
+ bdf->ibd_bits.b.b_sdtb = 0;
+ bdf->ibd_bits.b.b_dbo = 1;
+ bdf->ibd_bits.b.b_sbo = 1;
+ bdf->ibd_bits.b.b_valid = 1;
+ bdf->ibd_datlen = 512;
+
+ *dmadonep = 0;
+
+ immap->im_sdma.sdma_idmr2 = (uchar) 0xf;
+
+ immap->im_cpm.cp_cpcr = mk_cr_cmd (CPM_CR_IDMA2_PAGE,
+ CPM_CR_IDMA2_SBLOCK, 0x0,
+ 0x9) | 0x00010000;
+
+ while (*dmadonep != 1) {
+ if (ctrlc ()) {
+ DEBUG ("\nInterrupted waiting for DMA interrupt.\n");
+ goto done;
+ }
+ printf ("Waiting for DMA interrupt (dmadone=%d b_valid = %d)...\n",
+ dmadone, bdf->ibd_bits.b.b_valid);
+ udelay (1000000);
+ }
+ printf ("DMA complete notification received!\n");
+
+ done:
+ DEBUG ("memcmp(0x%08x, 0x%08x, 512) = %d\n",
+ sbuf, dbuf, memcmp ((void *) sbuf, (void *) dbuf, 512));
+
+ return;
+}
+
+#define MAX_INT_BUFSZ 64
+#define DCM_WRAP 0 /* MUST be consistant with MAX_INT_BUFSZ */
+
+int idma_init (void)
+{
+ uint memaddr;
+
+ immap->im_cpm.cp_rccr &= ~0x00F3FFFF;
+ immap->im_cpm.cp_rccr |= 0x00A00A00;
+
+ memaddr = dpalloc (sizeof (pram_idma_t), 64);
+
+ *(volatile ushort *) &immap->im_dprambase[PROFF_IDMA2_BASE] = memaddr;
+ piptr = (volatile pram_idma_t *) ((uint) (immap) + memaddr);
+
+ piptr->pi_resv1 = 0; /* manual says: clear it */
+ piptr->pi_dcmbits.b.b_fb = 0;
+ piptr->pi_dcmbits.b.b_lp = 1;
+ piptr->pi_dcmbits.b.b_erm = 0;
+ piptr->pi_dcmbits.b.b_dt = 0;
+
+ memaddr = (uint) dpalloc (sizeof (ibd_t), 64);
+ piptr->pi_ibase = piptr->pi_ibdptr = (volatile short) memaddr;
+ bdf = (volatile ibd_t *) ((uint) (immap) + memaddr);
+ bdf->ibd_bits.b.b_valid = 0;
+
+ memaddr = (uint) dpalloc (64, 64);
+ piptr->pi_dprbuf = (volatile ushort) memaddr;
+ piptr->pi_dcmbits.b.b_wrap = 4;
+ piptr->pi_ssmax = 32;
+
+ piptr->pi_sts = piptr->pi_ssmax;
+ piptr->pi_dts = piptr->pi_ssmax;
+
+ return 1;
+}
+
+void dmadone_handler (void *arg)
+{
+ immap->im_sdma.sdma_idmr2 = (uchar) 0x0;
+
+ *dmadonep = 1;
+
+ return;
+}
+
+
+static uint dpbase = 0;
+
+uint dpalloc (uint size, uint align)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ uint retloc;
+ uint align_mask, off;
+ uint savebase;
+
+ /* Pointer to initial global data area */
+
+ if (dpinit_done == 0) {
+ dpbase = gd->dp_alloc_base;
+ dpinit_done = 1;
+ }
+
+ align_mask = align - 1;
+ savebase = dpbase;
+
+ if ((off = (dpbase & align_mask)) != 0)
+ dpbase += (align - off);
+
+ if ((off = size & align_mask) != 0)
+ size += align - off;
+
+ if ((dpbase + size) >= gd->dp_alloc_top) {
+ dpbase = savebase;
+ printf ("dpalloc: ran out of dual port ram!");
+ return 0;
+ }
+
+ retloc = dpbase;
+ dpbase += size;
+
+ memset ((void *) &immr->im_dprambase[retloc], 0, size);
+
+ return (retloc);
+}
#define FP(x...) x
#define FP(x...) x
-.globl longjmp;
+.globl ppc_longjmp;
-longjmp:
+ppc_longjmp:
lwz r1,(JB_GPR1*4)(r3)
lwz r2,(JB_GPR2*4)(r3)
lwz r0,(JB_LR*4)(r3)
mr r1, r3
blr
-.globl _setjmp;
-_setjmp:
+.globl ppc_setjmp;
+ppc_setjmp:
stw r1,(JB_GPR1*4)(3)
mflr r0
stw r2,(JB_GPR2*4)(3)
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
- *
+ *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
#include <common.h>
#include <syscall.h>
-#include <setjmp.h>
/*
* Author: Arun Dharankar <ADharankar@ATTBI.Com>
#define RC_FAILURE (-1)
#define RC_SUCCESS (0)
+typedef vu_char *jmp_ctx;
+unsigned long setctxsp (vu_char *sp);
+int ppc_setjmp(jmp_ctx env);
+void ppc_longjmp(jmp_ctx env, int val);
+#define setjmp ppc_setjmp
+#define longjmp ppc_longjmp
+
struct lthread {
int state;
int retval;
static uchar dbg = 0;
-#define DEBUG(fmt, args...) { \
- if(dbg != 0) { \
- mon_printf("[%s %d %s]: ", __FILE__, __LINE__, __FUNCTION__); \
- mon_printf(fmt, ##args); \
- mon_printf("\n"); \
- } \
- }
+#define PDEBUG(fmt, args...) { \
+ if(dbg != 0) { \
+ mon_printf("[%s %d %s]: ",__FILE__,__LINE__,__FUNCTION__);\
+ mon_printf(fmt, ##args); \
+ mon_printf("\n"); \
+ } \
+}
static int testthread (void *);
static void sched_init (void);
static void thread_yield (void);
static int thread_delete (int id);
static int thread_join (int *ret);
-#if 0 /* not used yet */
+
+#if 0 /* not used yet */
static int thread_stop (int id);
-#endif /* not used yet */
+#endif /* not used yet */
/* An example of schedular test */
#define NUMTHREADS 7
-int sched (bd_t *bd, int ac, char *av[])
+int sched (bd_t * bd, int ac, char *av[])
{
int i, j;
int tid[NUMTHREADS];
names[i] = i;
j = thread_create (testthread, (void *) &names[i]);
if (j == RC_FAILURE)
- mon_printf ("schedtest: Failed to create thread %d\n",
- i);
+ mon_printf ("schedtest: Failed to create thread %d\n", i);
if (j > 0) {
mon_printf ("schedtest: Created thread with id %d, name %d\n",
- j, i);
+ j, i);
tid[i] = j;
}
}
if (mon_tstc () && mon_getc () == 0x3) {
mon_printf ("schedtest: Aborting threads...\n");
for (i = 0; i < NUMTHREADS; i++) {
- mon_printf ("schedtest: Deleting thread %d\n",
- tid[i]);
+ mon_printf ("schedtest: Deleting thread %d\n", tid[i]);
thread_delete (tid[i]);
}
return RC_SUCCESS;
i = thread_join (&j);
if (i == RC_FAILURE) {
mon_printf ("schedtest: No threads pending, "
- "exiting schedular test\n");
+ "exiting schedular test\n");
return RC_SUCCESS;
}
- mon_printf ("schedtest: thread is %d returned %d\n", i,
- j);
+ mon_printf ("schedtest: thread is %d returned %d\n", i, j);
thread_yield ();
}
int i;
mon_printf ("testthread: Begin executing thread, myname %d, &i=0x%08x\n",
- *(int *) name, &i);
+ *(int *) name, &i);
mon_printf ("Thread %02d, i=%d\n", *(int *) name);
for (i = 0; i < 0xffff * (*(int *) name + 1); i++) {
if (mon_tstc () && mon_getc () == 0x3) {
mon_printf ("testthread: myname %d terminating.\n",
- *(int *) name);
+ *(int *) name);
return *(int *) name + 1;
}
}
mon_printf ("testthread: returning %d, i=0x%x\n",
- *(int *) name + 1, i);
+ *(int *) name + 1, i);
return *(int *) name + 1;
}
current_tid = MASTER_THREAD;
lthreads[current_tid].state = STATE_RUNNABLE;
- DEBUG ("sched_init: master context = 0x%08x",
- lthreads[current_tid].context);
+ PDEBUG ("sched_init: master context = 0x%08x",
+ lthreads[current_tid].context);
return;
}
{
static int i;
- DEBUG ("thread_yield: current tid=%d", current_tid);
+ PDEBUG ("thread_yield: current tid=%d", current_tid);
#define SWITCH(new) \
if(lthreads[new].state == STATE_RUNNABLE) { \
- DEBUG("thread_yield: %d match, ctx=0x%08x", \
+ PDEBUG("thread_yield: %d match, ctx=0x%08x", \
new, lthreads[current_tid].context); \
if(setjmp(lthreads[current_tid].context) == 0) { \
current_tid = new; \
- DEBUG("thread_yield: tid %d returns 0", \
+ PDEBUG("thread_yield: tid %d returns 0", \
new); \
longjmp(lthreads[new].context, 1); \
} else { \
- DEBUG("thread_yield: tid %d returns 1", \
+ PDEBUG("thread_yield: tid %d returns 1", \
new); \
return; \
} \
}
}
- DEBUG ("thread_yield: returning from thread_yield");
+ PDEBUG ("thread_yield: returning from thread_yield");
return;
}
lthreads[i].state = STATE_STOPPED;
lthreads[i].func = func;
lthreads[i].arg = arg;
- DEBUG ("thread_create: returns new tid %d", i);
+ PDEBUG ("thread_create: returns new tid %d", i);
return i;
}
}
- DEBUG ("thread_create: returns failure");
+ PDEBUG ("thread_create: returns failure");
return RC_FAILURE;
}
static void thread_launcher (void)
{
- DEBUG ("thread_launcher: invoking func=0x%08x",
+ PDEBUG ("thread_launcher: invoking func=0x%08x",
lthreads[current_tid].func);
lthreads[current_tid].retval =
- lthreads[current_tid].func(lthreads[current_tid].arg);
+ lthreads[current_tid].func (lthreads[current_tid].arg);
- DEBUG ("thread_launcher: tid %d terminated", current_tid);
+ PDEBUG ("thread_launcher: tid %d terminated", current_tid);
lthreads[current_tid].state = STATE_TERMINATED;
thread_yield ();
static int thread_start (int id)
{
- DEBUG ("thread_start: id=%d", id);
+ PDEBUG ("thread_start: id=%d", id);
if (id <= MASTER_THREAD || id > MAX_THREADS) {
return RC_FAILURE;
}
if (setjmp (lthreads[current_tid].context) == 0) {
lthreads[id].state = STATE_RUNNABLE;
current_tid = id;
- DEBUG ("thread_start: to be stack=0%08x", lthreads[id].stack);
+ PDEBUG ("thread_start: to be stack=0%08x", lthreads[id].stack);
setctxsp (<hreads[id].stack[STK_SIZE]);
thread_launcher ();
}
- DEBUG ("thread_start: Thread id=%d started, parent returns", id);
+ PDEBUG ("thread_start: Thread id=%d started, parent returns", id);
return RC_SUCCESS;
}
-#if 0 /* not used so far */
+#if 0 /* not used so far */
static int thread_stop (int id)
{
if (id <= MASTER_THREAD || id >= MAX_THREADS)
lthreads[id].state = STATE_STOPPED;
return RC_SUCCESS;
}
-#endif /* not used so far */
+#endif /* not used so far */
static int thread_join (int *ret)
{
int i, j = 0;
- DEBUG ("thread_join: *ret = %d", *ret);
+ PDEBUG ("thread_join: *ret = %d", *ret);
if (!(*ret == -1 || *ret > MASTER_THREAD || *ret < MAX_THREADS)) {
- DEBUG ("thread_join: invalid tid %d", *ret);
+ PDEBUG ("thread_join: invalid tid %d", *ret);
return RC_FAILURE;
}
if (*ret == -1) {
- DEBUG ("Checking for tid = -1");
+ PDEBUG ("Checking for tid = -1");
while (1) {
- /* DEBUG("thread_join: start while-loopn"); */
+ /* PDEBUG("thread_join: start while-loopn"); */
j = 0;
for (i = MASTER_THREAD + 1; i < MAX_THREADS; i++) {
if (lthreads[i].state == STATE_TERMINATED) {
*ret = lthreads[i].retval;
lthreads[i].state = STATE_EMPTY;
- /* DEBUG("thread_join: returning retval %d of tid %d",
- ret, i); */
+ /* PDEBUG("thread_join: returning retval %d of tid %d",
+ ret, i); */
return RC_SUCCESS;
}
if (lthreads[i].state != STATE_EMPTY) {
- DEBUG ("thread_join: %d used slots tid %d state=%d",
- j, i, lthreads[i].state);
+ PDEBUG ("thread_join: %d used slots tid %d state=%d",
+ j, i, lthreads[i].state);
j++;
}
}
if (j == 0) {
- DEBUG ("thread_join: all slots empty!");
+ PDEBUG ("thread_join: all slots empty!");
return RC_FAILURE;
}
- /* DEBUG("thread_join: yielding"); */
+ /* PDEBUG("thread_join: yielding"); */
thread_yield ();
- /* DEBUG("thread_join: back from yield"); */
+ /* PDEBUG("thread_join: back from yield"); */
}
}
i = *ret;
*ret = lthreads[*ret].retval;
lthreads[*ret].state = STATE_EMPTY;
- DEBUG ("thread_join: returing %d for tid %d", *ret, i);
+ PDEBUG ("thread_join: returing %d for tid %d", *ret, i);
return RC_SUCCESS;
}
- DEBUG ("thread_join: thread %d is not terminated!", *ret);
+ PDEBUG ("thread_join: thread %d is not terminated!", *ret);
return RC_FAILURE;
}
/* Module : EBU register address and bits */
/***********************************************************************/
+#if defined(CONFIG_INCA_IP)
#define INCA_IP_EBU (0xB8000200)
+#elif defined(CONFIG_PURPLE)
+#define INCA_IP_EBU (0xB800D800)
+#endif
+
/***********************************************************************/
/* Module : ASC register address and bits */
/***********************************************************************/
+#if defined(CONFIG_INCA_IP)
#define INCA_IP_ASC (0xB8000400)
+#elif defined(CONFIG_PURPLE)
+#define INCA_IP_ASC (0xBE500000)
+#endif
+
/***********************************************************************/
#define CMD_TBL_DHCP MK_CMD_TBL_ENTRY( \
"dhcp", 4, 3, 1, do_dhcp, \
"dhcp - invoke DHCP client to obtain IP/boot params\n", \
- "\n" \
+ "[loadAddress] [bootfilename]\n" \
),
int do_dhcp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
#define CONFIG_BOOT_RETRY_TIME -10 /* feature is avaiable but not enabled */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
-#define CONFIG_BOOTCOMMAND "diskboot 200000 0:1; bootm" /* autoboot command */
+#define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */
#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */
#define CONFIG_IPADDR 10.0.0.100
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
57600, 115200, 230400, 460800, 921600 }
-#define CFG_LOAD_ADDR 0x200000 /* default load address */
+#define CFG_LOAD_ADDR 0x400000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
-#define CONFIG_BOOTCOMMAND "diskboot 200000 0:1; bootm" /* autoboot command */
+#define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */
#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */
#define CONFIG_IPADDR 10.0.0.100
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
57600, 115200, 230400, 460800, 921600 }
-#define CFG_LOAD_ADDR 0x200000 /* default load address */
+#define CFG_LOAD_ADDR 0x400000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
/* allowed values: 100000000 and 150000000 */
#define CPU_CLOCK_RATE 150000000 /* 150 MHz clock for the MIPS core */
-#define CONFIG_BAUDRATE 115200
+#if CPU_CLOCK_RATE == 100000000
+#define INFINEON_EBU_BOOTCFG 0x20C4 /* CMULT = 4 for 100 MHz */
+#else
+#define INFINEON_EBU_BOOTCFG 0x40C4 /* CMULT = 8 for 150 MHz */
+#endif
-#define CFG_SDRAM_BASE 0x80000000
-#define CFG_MALLOC_LEN 128*1024
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CFG_BOOTPARAMS_LEN 128*1024
+#define CONFIG_BAUDRATE 115200
/* valid baudrates */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF)
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off\0" \
+ "addmisc=setenv bootargs $(bootargs) " \
+ "console=ttyS0,$(baudrate) " \
+ "ethaddr=$(ethaddr) " \
+ "panic=1\0" \
+ "flash_nfs=run nfsargs addip addmisc;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip addmisc;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 80500000 $(bootfile);" \
+ "run nfsargs addip addmisc;bootm\0" \
+ "rootpath=/opt/eldk/mips_4KC\0" \
+ "bootfile=/tftpboot/INCA/uImage\0" \
+ "kernel_addr=B0040000\0" \
+ "ramdisk_addr=B0100000\0" \
+ "u-boot=/tftpboot/INCA/u-boot.bin\0" \
+ "load=tftp 80500000 $(u-boot)\0" \
+ "update=protect off 1:0-2;era 1:0-2;" \
+ "cp.b 80500000 B0000000 $(filesize)\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ELF )
#include <cmd_confdefs.h>
/*
#define CFG_PROMPT "INCA-IP # " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_HZ (CPU_CLOCK_RATE/2)
#define CFG_MAXARGS 16 /* max number of command args*/
+#define CFG_MALLOC_LEN 128*1024
+
+#define CFG_BOOTPARAMS_LEN 128*1024
+
+#define CFG_HZ (CPU_CLOCK_RATE/2)
+
+#define CFG_SDRAM_BASE 0x80000000
+
#define CFG_LOAD_ADDR 0x80100000 /* default load address */
-#define CFG_MEMTEST_START 0x80200000
+#define CFG_MEMTEST_START 0x80100000
#define CFG_MEMTEST_END 0x80800000
/*-----------------------------------------------------------------------
#define CONFIG_BAUDRATE 19200
#define CONFIG_MISC_INIT_R 1 /* we have a misc_init_r() function */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP)
+#define CONFIG_COMMANDS (CFG_CMD_BDI|CFG_CMD_LOADB|CFG_CMD_IMI|CFG_CMD_FLASH|CFG_CMD_MEMORY|CFG_CMD_NET|CFG_CMD_ENV|CFG_CMD_RUN|CFG_CMD_ASKENV|CFG_CMD_ECHO|CFG_CMD_I2C|CFG_CMD_DHCP)
+/* CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP) */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_CMDLINE_TAG 1
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
/*
* Miscellaneous configurable options
*/
/*
- * GPIO settings; see BDI2000 config file for details
+ * GPIO settings
*
* GP15 == nCS1 is 1
* GP24 == SFRM is 1
* [32:26] 0 - reserved
* [25] 0 - K2FREE: not free running
* [24] 0 - K1FREE: not free running
- * [23] 0 - K0FREE: not free running
+ * [23] 1 - K0FREE: not free running
* [22] 0 - SLFRSH: self refresh disabled
* [21] 0 - reserved
* [20] 0 - APD: no auto power down
* [16] 1 - K1RUN: enable SDCLK1
* [15] 1 - E1PIN: SDRAM clock enable
* [14] 1 - K0DB2: SDCLK0 is MemClk
- * [13] 1 - K0RUN: disable SDCLK0
+ * [13] 0 - K0RUN: disable SDCLK0
* [12] 1 - E0PIN: disable SDCKE0
* [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
*/
-#define CFG_MDREFR_VAL 0x0001F018
+#define CFG_MDREFR_VAL 0x0081D018
/* MDMRS: Mode Register Set Configuration Register
*
--- /dev/null
+/*
+ * Copyright (C) 2003 ETC s.r.o.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Written by Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_PXA250 1 /* this is an PXA250 CPU */
+#define CONFIG_WEPEP250 1 /* config for wepep250 board */
+#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
+
+
+/*
+ * Select serial console configuration
+ */
+#define CONFIG_BTUART 1 /* BTUART is default on WEP dev board */
+#define CONFIG_BAUDRATE 115200
+
+
+/*
+ * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
+ * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
+ * functionality or size of u-boot code.
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ & ~CFG_CMD_NET \
+ & ~CFG_CMD_LOADS \
+ & ~CFG_CMD_CONSOLE \
+ & ~CFG_CMD_AUTOSCRIPT \
+/* | CFG_CMD_JFFS2 */ \
+ )
+#include <cmd_confdefs.h>
+
+/*
+ * Boot options. Setting delay to -1 stops autostart count down.
+ * NOTE: Sending parameters to kernel depends on kernel version and
+ * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept
+ * parameters at all! Do not get confused by them so.
+ */
+#define CONFIG_BOOTDELAY -1
+#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=32m console=ttyS01,115200n8"
+#define CONFIG_BOOTCOMMAND "bootm 40000"
+
+
+/*
+ * General options for u-boot. Modify to save memory foot print
+ */
+#define CFG_LONGHELP /* undef saves memory */
+#define CFG_PROMPT "WEP> " /* prompt string */
+#define CFG_CBSIZE 256 /* console I/O buffer */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size */
+#define CFG_MAXARGS 16 /* max command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* boot args buf size */
+
+#define CFG_MEMTEST_START 0xa0400000 /* memtest test area */
+#define CFG_MEMTEST_END 0xa0800000
+
+#undef CFG_CLKS_IN_HZ /* use HZ for freq. display */
+
+#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED 0x141 /* core clock - register value */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */
+#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */
+#undef CONFIG_INITRD_TAG /* do not send initrd params */
+#undef CONFIG_VFD /* do not send framebuffer setup */
+
+
+/*
+ * Malloc pool need to host env + 128 Kb reserve for other allocations.
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + (128<<10) )
+
+#define CONFIG_STACKSIZE (120<<10) /* stack size */
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */
+#endif
+
+/*
+ * SDRAM Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
+#define WEP_SDRAM_1 0xa0000000 /* SDRAM bank #1 */
+#define WEP_SDRAM_1_SIZE 0x02000000 /* 32 MB ( 2 chip ) */
+#define WEP_SDRAM_2 0xa2000000 /* SDRAM bank #2 */
+#define WEP_SDRAM_2_SIZE 0x00000000 /* 0 MB */
+#define WEP_SDRAM_3 0xa8000000 /* SDRAM bank #3 */
+#define WEP_SDRAM_3_SIZE 0x00000000 /* 0 MB */
+#define WEP_SDRAM_4 0xac000000 /* SDRAM bank #4 */
+#define WEP_SDRAM_4_SIZE 0x00000000 /* 0 MB */
+
+#define CFG_DRAM_BASE 0xa0000000
+#define CFG_DRAM_SIZE 0x02000000
+
+/* Uncomment used SDRAM chip */
+#define WEP_SDRAM_K4S281633
+/*#define WEP_SDRAM_K4S561633*/
+
+
+/*
+ * Configuration for FLASH memory
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
+#define CFG_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */
+#define WEP_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */
+#define WEP_FLASH_INTERLEAVE 2 /* ... made of 2 chips */
+#define WEP_FLASH_BANK_SIZE 0x2000000 /* size of one flash bank*/
+#define WEP_FLASH_SECT_SIZE 0x0040000 /* size of erase sector */
+#define WEP_FLASH_BASE 0x0000000 /* location of flash memory */
+#define WEP_FLASH_UNLOCK 1 /* perform hw unlock first */
+
+
+/* This should be defined if CFI FLASH device is present. Actually benefit
+ is not so clear to me. In other words we can provide more informations
+ to user, but this expects more complex flash handling we do not provide
+ now.*/
+#undef CFG_FLASH_CFI
+
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* timeout for Erase operation */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* timeout for Write operation */
+
+#define CFG_FLASH_BASE WEP_FLASH_BASE
+
+/*
+ * This is setting for JFFS2 support in u-boot.
+ * Right now there is no gain for user, but later on booting kernel might be
+ * possible. Consider using XIP kernel running from flash to save RAM
+ * footprint.
+ * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ */
+#define CFG_JFFS2_FIRST_BANK 0
+#define CFG_JFFS2_FIRST_SECTOR 5
+#define CFG_JFFS2_NUM_BANKS 1
+
+/*
+ * Environment setup. Definitions of monitor location and size with
+ * definition of environment setup ends up in 2 possibilities.
+ * 1. Embeded environment - in u-boot code is space for environment
+ * 2. Environment is read from predefined sector of flash
+ * Right now we support 2. possiblity, but expecting no env placed
+ * on mentioned address right now. This also needs to provide whole
+ * sector for it - for us 256Kb is really waste of memory. U-boot uses
+ * default env. and until kernel parameters could be sent to kernel
+ * env. has no sense to us.
+ */
+
+#define CFG_MONITOR_BASE PHYS_FLASH_1
+#define CFG_MONITOR_LEN 0x20000 /* 128kb ( 1 flash sector ) */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0x20000 /* absolute address for now */
+#define CFG_ENV_SIZE 0x2000
+
+#undef CONFIG_ENV_OVERWRITE /* env is not writable now */
+
+/*
+ * Well this has to be defined, but on the other hand it is used differently
+ * one may expect. For instance loadb command do not cares :-)
+ * So advice is - do not relay on this...
+ */
+#define CFG_LOAD_ADDR 0x40000
+
+#endif /* __CONFIG_H */
+
gd_t gd_data;
bd_t bd_data;
init_fnc_t **init_fnc_ptr;
+ char *s;
#if defined(CONFIG_VFD)
unsigned long addr;
#endif
cs8900_get_enetaddr (gd->bd->bi_enetaddr);
#endif
+ /* Initialize from environment */
+ if ((s = getenv ("loadaddr")) != NULL) {
+ load_addr = simple_strtoul (s, NULL, 16);
+ }
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+ if ((s = getenv ("bootfile")) != NULL) {
+ copy_filename (BootFile, s, sizeof (BootFile));
+ }
+#endif /* CFG_CMD_NET */
+
#ifdef BOARD_POST_INIT
board_post_init ();
#endif
bd_t *bd;
init_fnc_t **init_fnc_ptr;
ulong addr, addr_sp, len = CFG_MONITOR_LEN;
+#ifdef CONFIG_PURPLE
+ void copy_code (ulong);
+#endif
/* Pointer is writable since we allocated a register for it.
*/
bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
memcpy (id, gd, sizeof (gd_t));
+
+ /* On the purple board we copy the code in a special way
+ * in order to solve flash problems
+ */
+#ifdef CONFIG_PURPLE
+ copy_code(addr);
+#endif
+
relocate_code (addr_sp, id, addr);
/* NOTREACHED - relocate_code() does not return */
console_init_r ();
/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/
+ /* Initialize from environment */
+ if ((s = getenv ("loadaddr")) != NULL) {
+ load_addr = simple_strtoul (s, NULL, 16);
+ }
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+ if ((s = getenv ("bootfile")) != NULL) {
+ copy_filename (BootFile, s, sizeof (BootFile));
+ }
+#endif /* CFG_CMD_NET */
+
+#if defined(CONFIG_MISC_INIT_R)
+ /* miscellaneous platform dependent initialisations */
+ misc_init_r ();
+#endif
+
#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
puts ("Net: ");
eth_initialize(gd->bd);
static void DhcpHandler(uchar * pkt, unsigned dest, unsigned src, unsigned len);
/* For Debug */
-char *dhcpmsg2str(int type)
+#if 0
+static char *dhcpmsg2str(int type)
{
switch (type) {
case 1: return "DHCPDISCOVER"; break;
default: return "UNKNOWN/INVALID MSG TYPE"; break;
}
}
+#endif
#if (CONFIG_BOOTP_MASK & CONFIG_BOOTP_VENDOREX)
extern u8 *dhcp_vendorex_prep (u8 *e); /*rtn new e after add own opts. */
/*
* Copy parameters of interest from BOOTP_REPLY/DHCP_OFFER packet
*/
-void BootpCopyNetParams(Bootp_t *bp)
+static void BootpCopyNetParams(Bootp_t *bp)
{
NetCopyIP(&NetOurIP, &bp->bp_yiaddr);
NetCopyIP(&NetServerIP, &bp->bp_siaddr);
}
#if (CONFIG_COMMANDS & CFG_CMD_DHCP)
-void DhcpOptionsProcess(char *popt)
+static void DhcpOptionsProcess(uchar *popt)
{
- char *end = popt + BOOTP_HDR_SIZE;
+ uchar *end = popt + BOOTP_HDR_SIZE;
int oplen, size;
while ( popt < end && *popt != 0xff ) {
return -1;
}
-void DhcpSendRequestPkt(Bootp_t *bp_offer)
+static void DhcpSendRequestPkt(Bootp_t *bp_offer)
{
volatile uchar *pkt, *iphdr;
Bootp_t *bp;
extern int fec_initialize(bd_t*);
extern int scc_initialize(bd_t*);
extern int inca_switch_initialize(bd_t*);
+extern int plb2800_eth_initialize(bd_t*);
static struct eth_device *eth_devices, *eth_current;
#ifdef CONFIG_INCA_IP_SWITCH
inca_switch_initialize(bis);
#endif
+#ifdef CONFIG_PLB2800_ETHER
+ plb2800_eth_initialize(bis);
+#endif
#ifdef CONFIG_EEPRO100
eepro100_initialize(bis);
#endif
OBJS = environment.o img2srec.o mkimage.o crc32.o envcrc.o gen_eth_addr.o bmp_logo.o
+ifeq ($(ARCH),mips)
+BINS += inca-swap-bytes$(SFX)
+OBJS += inca-swap-bytes.o
+endif
+
LOGO_H = $(TOPDIR)/include/bmp_logo.h
ifeq ($(LOGO_BMP),)
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
+inca-swap-bytes$(SFX): inca-swap-bytes.o
+ $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
+ $(STRIP) $@
+
envcrc.o: envcrc.c
$(CC) -g $(CFLAGS) -c $<
gen_eth_addr.o: gen_eth_addr.c
$(CC) -g $(CFLAGS) -c $<
+inca-swap-bytes.o: inca-swap-bytes.c
+ $(CC) -g $(CFLAGS) -c $<
+
subdirs:
@for dir in $(TOOLSUBDIRS) ; do \
$(MAKE) \
--- /dev/null
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#ifndef BUFSIZ
+# define BUFSIZ 4096
+#endif
+
+#undef BUFSIZ
+# define BUFSIZ 64
+int main (void)
+{
+ short ibuff[BUFSIZ], obuff[BUFSIZ];
+ int rc, i, len;
+
+ while ((rc = read (0, ibuff, sizeof (ibuff))) > 0) {
+ memset (obuff, 0, sizeof (obuff));
+ for (i = 0; i < (rc + 1) / 2; i++) {
+ obuff[i] = ibuff[i ^ 1];
+ }
+
+ len = (rc + 1) & ~1;
+
+ if (write (1, obuff, len) != len) {
+ perror ("read error");
+ return (EXIT_FAILURE);
+ }
+
+ memset (ibuff, 0, sizeof (ibuff));
+ }
+
+ if (rc < 0) {
+ perror ("read error");
+ return (EXIT_FAILURE);
+ }
+ return (EXIT_SUCCESS);
+}
projects / project / bcm63xx / u-boot.git / commitdiff