-#ifdef __uClinux__
-#include "irq_no.h"
+#ifndef _M68K_IRQ_H_
+#define _M68K_IRQ_H_
+
+/*
+ * This should be the same as the max(NUM_X_SOURCES) for all the
+ * different m68k hosts compiled into the kernel.
+ * Currently the Atari has 72 and the Amiga 24, but if both are
+ * supported in the kernel it is better to make room for 72.
+ */
+#if defined(CONFIG_COLDFIRE)
+#define NR_IRQS 256
+#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
+#define NR_IRQS 200
+#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
+#define NR_IRQS 72
+#elif defined(CONFIG_Q40)
+#define NR_IRQS 43
+#elif defined(CONFIG_AMIGA) || !defined(CONFIG_MMU)
+#define NR_IRQS 32
+#elif defined(CONFIG_APOLLO)
+#define NR_IRQS 24
+#elif defined(CONFIG_HP300)
+#define NR_IRQS 8
#else
-#include "irq_mm.h"
+#define NR_IRQS 0
#endif
+
+#ifdef CONFIG_MMU
+
+#include <linux/linkage.h>
+#include <linux/hardirq.h>
+#include <linux/irqreturn.h>
+#include <linux/spinlock_types.h>
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+/*
+ * Interrupt source definitions
+ * General interrupt sources are the level 1-7.
+ * Adding an interrupt service routine for one of these sources
+ * results in the addition of that routine to a chain of routines.
+ * Each one is called in succession. Each individual interrupt
+ * service routine should determine if the device associated with
+ * that routine requires service.
+ */
+
+#define IRQ_SPURIOUS 0
+
+#define IRQ_AUTO_1 1 /* level 1 interrupt */
+#define IRQ_AUTO_2 2 /* level 2 interrupt */
+#define IRQ_AUTO_3 3 /* level 3 interrupt */
+#define IRQ_AUTO_4 4 /* level 4 interrupt */
+#define IRQ_AUTO_5 5 /* level 5 interrupt */
+#define IRQ_AUTO_6 6 /* level 6 interrupt */
+#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */
+
+#define IRQ_USER 8
+
+extern unsigned int irq_canonicalize(unsigned int irq);
+
+struct pt_regs;
+
+/*
+ * various flags for request_irq() - the Amiga now uses the standard
+ * mechanism like all other architectures - IRQF_DISABLED and
+ * IRQF_SHARED are your friends.
+ */
+#ifndef MACH_AMIGA_ONLY
+#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */
+#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */
+#define IRQ_FLG_FAST (0x0004)
+#define IRQ_FLG_SLOW (0x0008)
+#define IRQ_FLG_STD (0x8000) /* internally used */
+#endif
+
+/*
+ * This structure is used to chain together the ISRs for a particular
+ * interrupt source (if it supports chaining).
+ */
+typedef struct irq_node {
+ irqreturn_t (*handler)(int, void *);
+ void *dev_id;
+ struct irq_node *next;
+ unsigned long flags;
+ const char *devname;
+} irq_node_t;
+
+/*
+ * This structure has only 4 elements for speed reasons
+ */
+struct irq_handler {
+ int (*handler)(int, void *);
+ unsigned long flags;
+ void *dev_id;
+ const char *devname;
+};
+
+struct irq_controller {
+ const char *name;
+ spinlock_t lock;
+ int (*startup)(unsigned int irq);
+ void (*shutdown)(unsigned int irq);
+ void (*enable)(unsigned int irq);
+ void (*disable)(unsigned int irq);
+};
+
+extern int m68k_irq_startup(unsigned int);
+extern void m68k_irq_shutdown(unsigned int);
+
+/*
+ * This function returns a new irq_node_t
+ */
+extern irq_node_t *new_irq_node(void);
+
+extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
+extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
+ void (*handler)(unsigned int, struct pt_regs *));
+extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
+
+asmlinkage void m68k_handle_int(unsigned int);
+asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
+
+#else
+#define irq_canonicalize(irq) (irq)
+#endif /* CONFIG_MMU */
+
+#endif /* _M68K_IRQ_H_ */
+++ /dev/null
-#ifndef _M68K_IRQ_H_
-#define _M68K_IRQ_H_
-
-#include <linux/linkage.h>
-#include <linux/hardirq.h>
-#include <linux/irqreturn.h>
-#include <linux/spinlock_types.h>
-
-/*
- * This should be the same as the max(NUM_X_SOURCES) for all the
- * different m68k hosts compiled into the kernel.
- * Currently the Atari has 72 and the Amiga 24, but if both are
- * supported in the kernel it is better to make room for 72.
- */
-#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
-#define NR_IRQS 200
-#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
-#define NR_IRQS 72
-#elif defined(CONFIG_Q40)
-#define NR_IRQS 43
-#elif defined(CONFIG_AMIGA)
-#define NR_IRQS 32
-#elif defined(CONFIG_APOLLO)
-#define NR_IRQS 24
-#elif defined(CONFIG_HP300)
-#define NR_IRQS 8
-#else
-#define NR_IRQS 0
-#endif
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-/*
- * Interrupt source definitions
- * General interrupt sources are the level 1-7.
- * Adding an interrupt service routine for one of these sources
- * results in the addition of that routine to a chain of routines.
- * Each one is called in succession. Each individual interrupt
- * service routine should determine if the device associated with
- * that routine requires service.
- */
-
-#define IRQ_SPURIOUS 0
-
-#define IRQ_AUTO_1 1 /* level 1 interrupt */
-#define IRQ_AUTO_2 2 /* level 2 interrupt */
-#define IRQ_AUTO_3 3 /* level 3 interrupt */
-#define IRQ_AUTO_4 4 /* level 4 interrupt */
-#define IRQ_AUTO_5 5 /* level 5 interrupt */
-#define IRQ_AUTO_6 6 /* level 6 interrupt */
-#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */
-
-#define IRQ_USER 8
-
-extern unsigned int irq_canonicalize(unsigned int irq);
-
-struct pt_regs;
-
-/*
- * various flags for request_irq() - the Amiga now uses the standard
- * mechanism like all other architectures - IRQF_DISABLED and
- * IRQF_SHARED are your friends.
- */
-#ifndef MACH_AMIGA_ONLY
-#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */
-#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */
-#define IRQ_FLG_FAST (0x0004)
-#define IRQ_FLG_SLOW (0x0008)
-#define IRQ_FLG_STD (0x8000) /* internally used */
-#endif
-
-/*
- * This structure is used to chain together the ISRs for a particular
- * interrupt source (if it supports chaining).
- */
-typedef struct irq_node {
- irqreturn_t (*handler)(int, void *);
- void *dev_id;
- struct irq_node *next;
- unsigned long flags;
- const char *devname;
-} irq_node_t;
-
-/*
- * This structure has only 4 elements for speed reasons
- */
-struct irq_handler {
- int (*handler)(int, void *);
- unsigned long flags;
- void *dev_id;
- const char *devname;
-};
-
-struct irq_controller {
- const char *name;
- spinlock_t lock;
- int (*startup)(unsigned int irq);
- void (*shutdown)(unsigned int irq);
- void (*enable)(unsigned int irq);
- void (*disable)(unsigned int irq);
-};
-
-extern int m68k_irq_startup(unsigned int);
-extern void m68k_irq_shutdown(unsigned int);
-
-/*
- * This function returns a new irq_node_t
- */
-extern irq_node_t *new_irq_node(void);
-
-extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
- void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
-
-asmlinkage void m68k_handle_int(unsigned int);
-asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
-
-#endif /* _M68K_IRQ_H_ */
+++ /dev/null
-#ifndef _M68KNOMMU_IRQ_H_
-#define _M68KNOMMU_IRQ_H_
-
-#ifdef CONFIG_COLDFIRE
-/*
- * On the ColdFire we keep track of all vectors. That way drivers
- * can register whatever vector number they wish, and we can deal
- * with it.
- */
-#define SYS_IRQS 256
-#define NR_IRQS SYS_IRQS
-
-#else
-
-/*
- * # of m68k interrupts
- */
-#define SYS_IRQS 8
-#define NR_IRQS (24 + SYS_IRQS)
-
-#endif /* CONFIG_COLDFIRE */
-
-
-#define irq_canonicalize(irq) (irq)
-
-#endif /* _M68KNOMMU_IRQ_H_ */
projects / openwrt / staging / blogic.git / commitdiff