ath10k: enable VHT160 and VHT80+80 modes

Set right channel frequencies in VHT160 mode according to the VHT160
interoperability workaround added as part of IEEE Std 802.11™-2016 in
"Table 9-252—VHT Operation Information subfields", band_center_freq2
corresponds to CCFS1 in Table 9-253. Previous implementation
(band_center_freq2 = 0 for VHT160) is only deprecated.

Enable VHT80+80 mode and set the proper peer RX nss value for VHT160 and
VHT80+80 mode.

Based on patches by Sebastian Gottschall:

https://lkml.kernel.org/r/20180704095444.662-1-s.gottschall@dd-wrt.com

https://lkml.kernel.org/r/20180704120519.6479-1-s.gottschall@dd-wrt.com

Tested: qca9984 with firmware ver 10.4-3.10-00047

Co-developed-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Co-developed-by: Rick Wu <rwu@codeaurora.org>
Signed-off-by: Rick Wu <rwu@codeaurora.org>
Signed-off-by: Lei Wang <leiwa@codeaurora.org>
Signed-off-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585574792-719-1-git-send-email-ssreeela@codeaurora.org

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 2d03b8dd3b8c78b415cf446a7d00f87e2ae668df..a59a7a5631a8874b18abfec0e8acb2cf92445ef8 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2505,6 +2505,30 @@ ath10k_peer_assoc_h_vht_limit(u16 tx_mcs_set,
        return tx_mcs_set;
 }
 
+static u32 get_160mhz_nss_from_maxrate(int rate)
+{
+       u32 nss;
+
+       switch (rate) {
+       case 780:
+               nss = 1;
+               break;
+       case 1560:
+               nss = 2;
+               break;
+       case 2106:
+               nss = 3; /* not support MCS9 from spec*/
+               break;
+       case 3120:
+               nss = 4;
+               break;
+       default:
+                nss = 1;
+       }
+
+       return nss;
+}
+
 static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
                                    struct ieee80211_vif *vif,
                                    struct ieee80211_sta *sta,
@@ -2512,6 +2536,7 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
 {
        const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
        struct ath10k_vif *arvif = (void *)vif->drv_priv;
+       struct ath10k_hw_params *hw = &ar->hw_params;
        struct cfg80211_chan_def def;
        enum nl80211_band band;
        const u16 *vht_mcs_mask;
@@ -2578,22 +2603,38 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
        arg->peer_vht_rates.tx_mcs_set = ath10k_peer_assoc_h_vht_limit(
                __le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map), vht_mcs_mask);
 
-       ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n",
-                  sta->addr, arg->peer_max_mpdu, arg->peer_flags);
+       /* Configure bandwidth-NSS mapping to FW
+        * for the chip's tx chains setting on 160Mhz bw
+        */
+       if (arg->peer_phymode == MODE_11AC_VHT160 ||
+           arg->peer_phymode == MODE_11AC_VHT80_80) {
+               u32 rx_nss;
+               u32 max_rate;
 
-       if (arg->peer_vht_rates.rx_max_rate &&
-           (sta->vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK)) {
-               switch (arg->peer_vht_rates.rx_max_rate) {
-               case 1560:
-                       /* Must be 2x2 at 160Mhz is all it can do. */
-                       arg->peer_bw_rxnss_override = 2;
-                       break;
-               case 780:
-                       /* Can only do 1x1 at 160Mhz (Long Guard Interval) */
-                       arg->peer_bw_rxnss_override = 1;
-                       break;
+               max_rate = arg->peer_vht_rates.rx_max_rate;
+               rx_nss = get_160mhz_nss_from_maxrate(max_rate);
+
+               if (rx_nss == 0)
+                       rx_nss = arg->peer_num_spatial_streams;
+               else
+                       rx_nss = min(arg->peer_num_spatial_streams, rx_nss);
+
+               max_rate = hw->vht160_mcs_tx_highest;
+               rx_nss = min(rx_nss, get_160mhz_nss_from_maxrate(max_rate));
+
+               arg->peer_bw_rxnss_override =
+                       FIELD_PREP(WMI_PEER_NSS_MAP_ENABLE, 1) |
+                       FIELD_PREP(WMI_PEER_NSS_160MHZ_MASK, (rx_nss - 1));
+
+               if (arg->peer_phymode == MODE_11AC_VHT80_80) {
+                       arg->peer_bw_rxnss_override |=
+                       FIELD_PREP(WMI_PEER_NSS_80_80MHZ_MASK, (rx_nss - 1));
                }
        }
+       ath10k_dbg(ar, ATH10K_DBG_MAC,
+                  "mac vht peer %pM max_mpdu %d flags 0x%x peer_rx_nss_override 0x%x\n",
+                  sta->addr, arg->peer_max_mpdu,
+                  arg->peer_flags, arg->peer_bw_rxnss_override);
 }
 
 static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
@@ -2745,9 +2786,9 @@ static int ath10k_peer_assoc_prepare(struct ath10k *ar,
        ath10k_peer_assoc_h_crypto(ar, vif, sta, arg);
        ath10k_peer_assoc_h_rates(ar, vif, sta, arg);
        ath10k_peer_assoc_h_ht(ar, vif, sta, arg);
+       ath10k_peer_assoc_h_phymode(ar, vif, sta, arg);
        ath10k_peer_assoc_h_vht(ar, vif, sta, arg);
        ath10k_peer_assoc_h_qos(ar, vif, sta, arg);
-       ath10k_peer_assoc_h_phymode(ar, vif, sta, arg);
 
        return 0;
 }
@@ -4563,13 +4604,6 @@ static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
                vht_cap.cap |= val;
        }
 
-       /* Currently the firmware seems to be buggy, don't enable 80+80
-        * mode until that's resolved.
-        */
-       if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SHORT_GI_160) &&
-           (ar->vht_cap_info & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == 0)
-               vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
-
        mcs_map = 0;
        for (i = 0; i < 8; i++) {
                if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
@@ -8625,7 +8659,9 @@ static const struct ieee80211_iface_combination ath10k_10_4_if_comb[] = {
                .radar_detect_widths =  BIT(NL80211_CHAN_WIDTH_20_NOHT) |
                                        BIT(NL80211_CHAN_WIDTH_20) |
                                        BIT(NL80211_CHAN_WIDTH_40) |
-                                       BIT(NL80211_CHAN_WIDTH_80),
+                                       BIT(NL80211_CHAN_WIDTH_80) |
+                                       BIT(NL80211_CHAN_WIDTH_80P80) |
+                                       BIT(NL80211_CHAN_WIDTH_160),
 #endif
        },
 };
@@ -8643,7 +8679,9 @@ ieee80211_iface_combination ath10k_10_4_bcn_int_if_comb[] = {
                .radar_detect_widths =  BIT(NL80211_CHAN_WIDTH_20_NOHT) |
                                        BIT(NL80211_CHAN_WIDTH_20) |
                                        BIT(NL80211_CHAN_WIDTH_40) |
-                                       BIT(NL80211_CHAN_WIDTH_80),
+                                       BIT(NL80211_CHAN_WIDTH_80) |
+                                       BIT(NL80211_CHAN_WIDTH_80P80) |
+                                       BIT(NL80211_CHAN_WIDTH_160),
 #endif
        },
 };

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 2ea77bb880b19247414ffa3bd7a846a41c761c88..db6f4c7514850fb4506650815a9fb64aa7085130 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1714,12 +1714,23 @@ void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
        if (arg->chan_radar)
                flags |= WMI_CHAN_FLAG_DFS;
 
+       ch->band_center_freq2 = 0;
        ch->mhz = __cpu_to_le32(arg->freq);
        ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1);
        if (arg->mode == MODE_11AC_VHT80_80)
                ch->band_center_freq2 = __cpu_to_le32(arg->band_center_freq2);
-       else
-               ch->band_center_freq2 = 0;
+
+       if (arg->mode == MODE_11AC_VHT160) {
+               if (arg->freq > arg->band_center_freq1)
+                       ch->band_center_freq1 =
+                               __cpu_to_le32(arg->band_center_freq1 + 40);
+               else
+                       ch->band_center_freq1 =
+                               __cpu_to_le32(arg->band_center_freq1 - 40);
+
+               ch->band_center_freq2 = __cpu_to_le32(arg->band_center_freq1);
+       }
+
        ch->min_power = arg->min_power;
        ch->max_power = arg->max_power;
        ch->reg_power = arg->max_reg_power;
@@ -7628,12 +7639,8 @@ ath10k_wmi_peer_assoc_fill_10_4(struct ath10k *ar, void *buf,
        struct wmi_10_4_peer_assoc_complete_cmd *cmd = buf;
 
        ath10k_wmi_peer_assoc_fill_10_2(ar, buf, arg);
-       if (arg->peer_bw_rxnss_override)
-               cmd->peer_bw_rxnss_override =
-                       __cpu_to_le32((arg->peer_bw_rxnss_override - 1) |
-                                     BIT(PEER_BW_RXNSS_OVERRIDE_OFFSET));
-       else
-               cmd->peer_bw_rxnss_override = 0;
+       cmd->peer_bw_rxnss_override =
+               __cpu_to_le32(arg->peer_bw_rxnss_override);
 }
 
 static int

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 6df415778374b20beb04a105f1f9f397ba3565e2..5ba0c9a7d18c63721fa6dd5980acdaeec81383db 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -6508,7 +6508,10 @@ struct wmi_10_2_peer_assoc_complete_cmd {
        __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
 } __packed;
 
-#define PEER_BW_RXNSS_OVERRIDE_OFFSET  31
+/* NSS Mapping to FW */
+#define WMI_PEER_NSS_MAP_ENABLE        BIT(31)
+#define WMI_PEER_NSS_160MHZ_MASK       GENMASK(2, 0)
+#define WMI_PEER_NSS_80_80MHZ_MASK     GENMASK(5, 3)
 
 struct wmi_10_4_peer_assoc_complete_cmd {
        struct wmi_10_2_peer_assoc_complete_cmd cmd;