net/phy: Add support for realtek RTL8211F

RTL8211F has different registers from RTL8211E.
This patch adds support for RTL8211F PHY which
can be found on Freescale's T1023 RDB board.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index ee9707950a87f6028a1e162779227ab9422b58c1..2e152c9a036ca0d6f893f13082e63fc88ab8d06f 100644 (file)
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -29,6 +29,18 @@
 /* RTL8211x PHY Interrupt Status Register */
 #define MIIM_RTL8211x_PHY_INSR         0x13
 
+/* RTL8211F PHY Status Register */
+#define MIIM_RTL8211F_PHY_STATUS       0x1a
+#define MIIM_RTL8211F_AUTONEG_ENABLE   0x1000
+#define MIIM_RTL8211F_PHYSTAT_SPEED    0x0030
+#define MIIM_RTL8211F_PHYSTAT_GBIT     0x0020
+#define MIIM_RTL8211F_PHYSTAT_100      0x0010
+#define MIIM_RTL8211F_PHYSTAT_DUPLEX   0x0008
+#define MIIM_RTL8211F_PHYSTAT_SPDDONE  0x0800
+#define MIIM_RTL8211F_PHYSTAT_LINK     0x0004
+
+#define MIIM_RTL8211F_PAGE_SELECT      0x1f
+
 /* RealTek RTL8211x */
 static int rtl8211x_config(struct phy_device *phydev)
 {
@@ -105,6 +117,58 @@ static int rtl8211x_parse_status(struct phy_device *phydev)
        return 0;
 }
 
+static int rtl8211f_parse_status(struct phy_device *phydev)
+{
+       unsigned int speed;
+       unsigned int mii_reg;
+       int i = 0;
+
+       phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, 0xa43);
+       mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PHY_STATUS);
+
+       phydev->link = 1;
+       while (!(mii_reg & MIIM_RTL8211F_PHYSTAT_LINK)) {
+               if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
+                       puts(" TIMEOUT !\n");
+                       phydev->link = 0;
+                       break;
+               }
+
+               if ((i++ % 1000) == 0)
+                       putc('.');
+               udelay(1000);
+               mii_reg = phy_read(phydev, MDIO_DEVAD_NONE,
+                                  MIIM_RTL8211F_PHY_STATUS);
+       }
+
+       if (mii_reg & MIIM_RTL8211F_PHYSTAT_DUPLEX)
+               phydev->duplex = DUPLEX_FULL;
+       else
+               phydev->duplex = DUPLEX_HALF;
+
+       speed = (mii_reg & MIIM_RTL8211F_PHYSTAT_SPEED);
+
+       switch (speed) {
+       case MIIM_RTL8211F_PHYSTAT_GBIT:
+               phydev->speed = SPEED_1000;
+               break;
+       case MIIM_RTL8211F_PHYSTAT_100:
+               phydev->speed = SPEED_100;
+               break;
+       default:
+               phydev->speed = SPEED_10;
+       }
+
+       if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
+               /* enable TXDLY */
+               phy_write(phydev, MDIO_DEVAD_NONE,
+                         MIIM_RTL8211F_PAGE_SELECT, 0xd08);
+               phy_write(phydev, MDIO_DEVAD_NONE, 0x11, 0x109);
+       }
+
+       return 0;
+}
+
 static int rtl8211x_startup(struct phy_device *phydev)
 {
        /* Read the Status (2x to make sure link is right) */
@@ -114,6 +178,15 @@ static int rtl8211x_startup(struct phy_device *phydev)
        return 0;
 }
 
+static int rtl8211f_startup(struct phy_device *phydev)
+{
+       /* Read the Status (2x to make sure link is right) */
+       genphy_update_link(phydev);
+       rtl8211f_parse_status(phydev);
+
+       return 0;
+}
+
 /* Support for RTL8211B PHY */
 static struct phy_driver RTL8211B_driver = {
        .name = "RealTek RTL8211B",
@@ -147,10 +220,22 @@ static struct phy_driver RTL8211DN_driver = {
        .shutdown = &genphy_shutdown,
 };
 
+/* Support for RTL8211F PHY */
+static struct phy_driver RTL8211F_driver = {
+       .name = "RealTek RTL8211F",
+       .uid = 0x1cc916,
+       .mask = 0xffffff,
+       .features = PHY_GBIT_FEATURES,
+       .config = &rtl8211x_config,
+       .startup = &rtl8211f_startup,
+       .shutdown = &genphy_shutdown,
+};
+
 int phy_realtek_init(void)
 {
        phy_register(&RTL8211B_driver);
        phy_register(&RTL8211E_driver);
+       phy_register(&RTL8211F_driver);
        phy_register(&RTL8211DN_driver);
 
        return 0;