compat-wireless: sync atheros-debug.mk with config.mk

Add to compat-3.0-stable

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

diff --git a/defconfigs/atheros-debug.mk b/defconfigs/atheros-debug.mk
index d9534eb1c90e847048ee816546af541df5f609f4..fb884aae1c61e777ffa8ebb7923ffef95b2c521f 100644 (file)
--- a/defconfigs/atheros-debug.mk
+++ b/defconfigs/atheros-debug.mk
@@ -14,20 +14,28 @@ else
 include $(KLIB_BUILD)/.config
 endif
 
-# We will warn when you don't have MQ support or NET_SCHED enabled.
-#
-# We could consider just quiting if MQ and NET_SCHED is disabled
-# as I suspect all users of this package want 802.11e (WME) and
-# 802.11n (HT) support.
 ifneq ($(wildcard $(KLIB_BUILD)/Makefile),)
-COMPAT_LATEST_VERSION = 37
-KERNEL_SUBLEVEL := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p')
+
+COMPAT_LATEST_VERSION = 1
+
+KERNEL_VERSION := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^\([0-9]\)\..*/\1/p')
+
+ifneq ($(KERNEL_VERSION),2)
+KERNEL_SUBLEVEL := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^3\.\([0-9]\+\).*/\1/p')
+else
+COMPAT_26LATEST_VERSION = 39
+KERNEL_26SUBLEVEL := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p')
+COMPAT_26VERSIONS := $(shell I=$(COMPAT_26LATEST_VERSION); while [ "$$I" -gt $(KERNEL_26SUBLEVEL) ]; do echo $$I; I=$$(($$I - 1)); done)
+$(foreach ver,$(COMPAT_26VERSIONS),$(eval CONFIG_COMPAT_KERNEL_2_6_$(ver)=y))
+KERNEL_SUBLEVEL := -1
+endif
+
 COMPAT_VERSIONS := $(shell I=$(COMPAT_LATEST_VERSION); while [ "$$I" -gt $(KERNEL_SUBLEVEL) ]; do echo $$I; I=$$(($$I - 1)); done)
-$(foreach ver,$(COMPAT_VERSIONS),$(eval CONFIG_COMPAT_KERNEL_$(ver)=y))
+$(foreach ver,$(COMPAT_VERSIONS),$(eval CONFIG_COMPAT_KERNEL_3_$(ver)=y))
 
-ifdef CONFIG_COMPAT_KERNEL_24
+ifdef CONFIG_COMPAT_KERNEL_2_6_24
 $(error "ERROR: compat-wireless by default supports kernels >= 2.6.24, try enabling only one driver though")
-endif #CONFIG_COMPAT_KERNEL_24
+endif #CONFIG_COMPAT_KERNEL_2_6_24
 
 ifeq ($(CONFIG_CFG80211),y)
 $(error "ERROR: your kernel has CONFIG_CFG80211=y, you should have it CONFIG_CFG80211=m if you want to use this thing.")
@@ -37,7 +45,7 @@ endif
 # 2.6.27 has FTRACE_DYNAMIC borked, so we will complain if
 # you have it enabled, otherwise you will very likely run into
 # a kernel panic.
-ifeq ($(KERNEL_SUBLEVEL),27)
+ifeq ($(shell test $(KERNEL_VERSION) -eq 2 -a $(KERNEL_SUBLEVEL) -eq 27 && echo yes),yes)
 ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
 $(error "ERROR: Your 2.6.27 kernel has CONFIG_DYNAMIC_FTRACE, please upgrade your distribution kernel as newer ones should not have this enabled (and if so report a bug) or remove this warning if you know what you are doing")
 endif
@@ -54,7 +62,7 @@ endif
 #
 # In kernel 2.6.32 both attributes were removed.
 #
-ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 27 -a $(KERNEL_SUBLEVEL) -le 31 && echo yes),yes)
+ifeq ($(shell test $(KERNEL_VERSION) -eq 2 -a $(KERNEL_SUBLEVEL) -ge 27 -a $(KERNEL_SUBLEVEL) -le 31 && echo yes),yes)
 ifeq ($(CONFIG_MAC80211),)
 $(error "ERROR: Your >=2.6.27 and <= 2.6.31 kernel has CONFIG_MAC80211 disabled, you should have it CONFIG_MAC80211=m if you want to use this thing.")
 endif
@@ -62,6 +70,11 @@ endif
 
 ifneq ($(KERNELRELEASE),) # This prevents a warning
 
+# We will warn when you don't have MQ support or NET_SCHED enabled.
+#
+# We could consider just quiting if MQ and NET_SCHED is disabled
+# as I suspect all users of this package want 802.11e (WME) and
+# 802.11n (HT) support.
 ifeq ($(CONFIG_NET_SCHED),)
  QOS_REQS_MISSING+=CONFIG_NET_SCHED
 endif
@@ -92,21 +105,20 @@ else
 endif
 
 # The Bluetooth compatibility only builds on kernels >= 2.6.27 for now
-ifndef CONFIG_COMPAT_KERNEL_27
+ifndef CONFIG_COMPAT_KERNEL_2_6_27
 ifeq ($(CONFIG_BT),y)
 # we'll ignore compiling bluetooth
 else
  CONFIG_COMPAT_BLUETOOTH=y
  CONFIG_COMPAT_BLUETOOTH_MODULES=m
 endif
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2_6_27
 
-ifdef CONFIG_COMPAT_KERNEL_33
+ifdef CONFIG_COMPAT_KERNEL_2_6_33
 ifdef CONFIG_FW_LOADER
  CONFIG_COMPAT_FIRMWARE_CLASS=m
 endif #CONFIG_FW_LOADER
-endif #CONFIG_COMPAT_KERNEL_33
-
+endif #CONFIG_COMPAT_KERNEL_2_6_33
 
 # Wireless subsystem stuff
 CONFIG_MAC80211=m
@@ -133,7 +145,9 @@ CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel_ht
 CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_MINSTREL=y
 CONFIG_MAC80211_RC_MINSTREL_HT=y
+ifdef CONFIG_LEDS_TRIGGERS
 CONFIG_MAC80211_LEDS=y
+endif #CONFIG_LEDS_TRIGGERS
 
 # enable mesh networking too
 CONFIG_MAC80211_MESH=y
@@ -153,8 +167,8 @@ CONFIG_LIB80211_CRYPT_TKIP=m
 # CONFIG_LIB80211_DEBUG=y
 
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_COMPAT_BT_L2CAP=y
+CONFIG_COMPAT_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
@@ -164,7 +178,9 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 ifdef CONFIG_ISDN_CAPI
 CONFIG_BT_CMTP=m
 endif #CONFIG_ISDN_CAPI
-CONFIG_BT_HIDP=m
+ifndef CONFIG_COMPAT_KERNEL_2_6_28
+CONFIG_COMPAT_BT_HIDP=m
+endif #CONFIG_COMPAT_KERNEL_2_6_28
 
 CONFIG_BT_HCIUART=M
 CONFIG_BT_HCIUART_H4=y
@@ -196,26 +212,24 @@ else #CONFIG_CFG80211_WEXT
 $(warning "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m.")
 endif #CONFIG_WIRELESS_EXT
 
-ifneq ($(CONFIG_STAGING),)
- CONFIG_COMPAT_STAGING=m
-endif
+ifdef CONFIG_STAGING
+CONFIG_COMPAT_STAGING=m
+endif #CONFIG_STAGING
 
 # mac80211 test driver
 CONFIG_MAC80211_HWSIM=m
 
-# PCI Drivers
-ifdef CONFIG_PCI
-
 CONFIG_ATH5K=m
 CONFIG_ATH5K_DEBUG=y
-CONFIG_ATH9K_HW=m
+# CONFIG_ATH5K_AHB=y
+
 CONFIG_ATH9K=m
-# Note: once ath9k_htc is added we'll have to move
-# CONFIG_ATH9K_COMMON to an area that doesn't depend on PCI
-# as you could then have ath9k disabled but ath9k_htc enabled.
+CONFIG_ATH9K_HW=m
 CONFIG_ATH9K_COMMON=m
 CONFIG_ATH9K_DEBUGFS=y
+# CONFIG_ATH9K_AHB=y
 CONFIG_ATH9K_PKTLOG=y
+
 # Disable this to get minstrel as default, we leave the ath9k
 # rate control algorithm as the default for now as that is also
 # default upstream on the kernel. We will move this to minstrel
@@ -224,15 +238,25 @@ CONFIG_ATH9K_PKTLOG=y
 # for long range considerations.
 CONFIG_ATH9K_RATE_CONTROL=y
 
+# PCI Drivers
+ifdef CONFIG_PCI
 
-CONFIG_COMPAT_IWLWIFI=m
+CONFIG_ATH5K_PCI=y
+CONFIG_ATH9K_PCI=y
+
+CONFIG_IWLAGN=m
 # CONFIG_IWLWIFI_DEBUG=y
 # CONFIG_IWLWIFI_DEBUGFS=y
 # CONFIG_IWLWIFI_DEVICE_TRACING=y
-CONFIG_IWLAGN=m
-CONFIG_COMPAT_IWL4965=y
-CONFIG_IWL5000=y
+# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y
+CONFIG_IWL_P2P=y
+
+CONFIG_IWLWIFI_LEGACY=m
+CONFIG_COMPAT_IWL4965=m
 CONFIG_IWL3945=m
+# CONFIG_IWLWIFI_LEGACY_DEBUG=y
+# CONFIG_IWLWIFI_LEGACY_DEBUGFS=y
+# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING=y
 
 
 CONFIG_B43=m
@@ -241,16 +265,20 @@ CONFIG_B43_PCI_AUTOSELECT=y
 ifdef CONFIG_PCMCIA
 CONFIG_B43_PCMCIA=y
 endif #CONFIG_PCMCIA
+ifdef CONFIG_MAC80211_LEDS
 CONFIG_B43_LEDS=y
+endif #CONFIG_MAC80211_LEDS
 CONFIG_B43_PHY_LP=y
-CONFIG_B43_NPHY=y
+CONFIG_B43_PHY_N=y
 # CONFIG_B43_FORCE_PIO=y
 # CONFIG_B43_DEBUG=y
 
 CONFIG_B43LEGACY=m
 CONFIG_B43LEGACY_HWRNG=y
 CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+ifdef CONFIG_MAC80211_LEDS
 CONFIG_B43LEGACY_LEDS=y
+endif #CONFIG_MAC80211_LEDS
 # CONFIG_B43LEGACY_DEBUG=y
 CONFIG_B43LEGACY_DMA=y
 CONFIG_B43LEGACY_PIO=y
@@ -286,7 +314,6 @@ endif #CONFIG_WIRELESS_EXT
 ifdef CONFIG_SSB
 # Sonics Silicon Backplane
 CONFIG_SSB_SPROM=y
-# CONFIG_SSB_DEBUG=y
 
 CONFIG_SSB_BLOCKIO=y
 CONFIG_SSB_PCIHOST=y
@@ -312,10 +339,9 @@ CONFIG_RT2400PCI=m
 CONFIG_RT2500PCI=m
 ifdef CONFIG_CRC_CCITT
 CONFIG_RT2800PCI=m
-CONFIG_RT2800PCI_PCI=y
-# CONFIG_RT2800PCI_RT30XX=y
-# CONFIG_RT2800PCI_RT35XX=y
-# CONFIG_RT2800PCI_SOC=y
+CONFIG_RT2800PCI_RT33XX=y
+CONFIG_RT2800PCI_RT35XX=y
+# CONFIG_RT2800PCI_RT53XX=y
 endif #CONFIG_CRC_CCITT
 NEED_RT2X00=y
 
@@ -324,7 +350,6 @@ NEED_RT2X00=y
 # driver as we're in the PCI section.
 ifdef CONFIG_CRC_ITU_T
 CONFIG_RT61PCI=m
-NEED_RT2X00_FIRMWARE=y
 endif #CONFIG_CRC_ITU_T
 
 CONFIG_MWL8K=m
@@ -333,11 +358,11 @@ CONFIG_MWL8K=m
 CONFIG_ATL1=m
 CONFIG_ATL2=m
 CONFIG_ATL1E=m
-ifdef CONFIG_COMPAT_KERNEL_27
+ifdef CONFIG_COMPAT_KERNEL_2_6_27
 CONFIG_ATL1C=n
-else #CONFIG_COMPAT_KERNEL_27
+else #CONFIG_COMPAT_KERNEL_2_6_27
 CONFIG_ATL1C=m
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2_6_27
 
 ifdef CONFIG_WIRELESS_EXT
 CONFIG_HERMES=m
@@ -355,18 +380,25 @@ CONFIG_PCMCIA_SPECTRUM=m
 endif #CONFIG_PCMCIA
 endif #CONFIG_WIRELESS_EXT
 
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+
+ifdef CONFIG_COMPAT_STAGING
+CONFIG_BRCMSMAC=m
+endif #CONFIG_COMPAT_STAGING
+
 endif #CONFIG_PCI
 ## end of PCI
 
 ifdef CONFIG_PCMCIA
 
-ifdef CONFIG_COMPAT_KERNEL_27
+ifdef CONFIG_COMPAT_KERNEL_2_6_27
 CONFIG_LIBERTAS=n
 CONFIG_LIBERTAS_CS=n
-else #CONFIG_COMPAT_KERNEL_27
+else #CONFIG_COMPAT_KERNEL_2_6_27
 CONFIG_LIBERTAS_CS=m
 NEED_LIBERTAS=y
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2_6_27
 
 endif #CONFIG_PCMCIA
 ## end of PCMCIA
@@ -376,8 +408,10 @@ CONFIG_EEPROM_93CX6=m
 
 # USB Drivers
 ifdef CONFIG_USB
-CONFIG_ZD1211RW=m
+ifndef CONFIG_COMPAT_KERNEL_2_6_29
+CONFIG_COMPAT_ZD1211RW=m
 # CONFIG_ZD1211RW_DEBUG=y
+endif #CONFIG_COMPAT_KERNEL_2_6_29
 
 # Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
 
@@ -386,38 +420,41 @@ CONFIG_ZD1211RW=m
 # is only wireless RNDIS chip known to date.
 # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
 # it also requires new RNDIS_HOST and CDC_ETHER modules which we add
-ifdef CONFIG_COMPAT_KERNEL_29
+ifdef CONFIG_COMPAT_KERNEL_2_6_29
 CONFIG_USB_COMPAT_USBNET=n
 CONFIG_USB_NET_COMPAT_RNDIS_HOST=n
 CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n
 CONFIG_USB_NET_COMPAT_CDCETHER=n
-else #CONFIG_COMPAT_KERNEL_29
+else #CONFIG_COMPAT_KERNEL_2_6_29
 CONFIG_USB_COMPAT_USBNET=m
 ifdef CONFIG_USB_NET_CDCETHER
 CONFIG_USB_NET_COMPAT_RNDIS_HOST=m
 CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m
 endif #CONFIG_USB_NET_CDCETHER
+ifdef CONFIG_USB_NET_CDCETHER_MODULE
+CONFIG_USB_NET_COMPAT_RNDIS_HOST=m
+CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m
+endif #CONFIG_USB_NET_CDCETHER
 CONFIG_USB_NET_COMPAT_CDCETHER=m
-endif #CONFIG_COMPAT_KERNEL_29
+endif #CONFIG_COMPAT_KERNEL_2_6_29
 
 
 CONFIG_P54_USB=m
 CONFIG_RTL8187=m
+ifdef CONFIG_MAC80211_LEDS
 CONFIG_RTL8187_LEDS=y
+endif #CONFIG_MAC80211_LEDS
 
 CONFIG_AT76C50X_USB=m
 
-ifndef CONFIG_COMPAT_KERNEL_28
-CONFIG_AR9170_USB=m
-CONFIG_AR9170_LEDS=y
-endif #CONFIG_COMPAT_KERNEL_28
-
-ifndef CONFIG_COMPAT_KERNEL_29
+ifndef CONFIG_COMPAT_KERNEL_2_6_29
 CONFIG_CARL9170=m
+ifdef CONFIG_MAC80211_LEDS
 CONFIG_CARL9170_LEDS=y
+endif #CONFIG_MAC80211_LEDS
 CONFIG_CARL9170_DEBUGFS=y
 CONFIG_CARL9170_WPC=y
-endif #CONFIG_COMPAT_KERNEL_29
+endif #CONFIG_COMPAT_KERNEL_2_6_29
 
 # This activates a threading fix for usb urb.
 # this is mainline commit: b3e670443b7fb8a2d29831b62b44a039c283e351
@@ -431,8 +468,9 @@ CONFIG_ATH9K_HTC_DEBUGFS=y
 CONFIG_RT2500USB=m
 ifdef CONFIG_CRC_CCITT
 CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT30XX=y
+CONFIG_RT2800USB_RT33XX=y
 CONFIG_RT2800USB_RT35XX=y
+# CONFIG_RT2800USB_RT53XX=y
 CONFIG_RT2800USB_UNKNOWN=y
 endif #CONFIG_CRC_CCITT
 CONFIG_RT2X00_LIB_USB=m
@@ -440,18 +478,17 @@ NEED_RT2X00=y
 # RT73USB requires firmware
 ifdef CONFIG_CRC_ITU_T
 CONFIG_RT73USB=m
-NEED_RT2X00_FIRMWARE=y
 endif #CONFIG_CRC_ITU_T
 
-ifdef CONFIG_COMPAT_KERNEL_27
+ifdef CONFIG_COMPAT_KERNEL_2_6_27
 CONFIG_LIBERTAS_THINFIRM_USB=n
 CONFIG_LIBERTAS_USB=n
 NEED_LIBERTAS=n
-else #CONFIG_COMPAT_KERNEL_27
+else #CONFIG_COMPAT_KERNEL_2_6_27
 CONFIG_LIBERTAS_THINFIRM_USB=m
 CONFIG_LIBERTAS_USB=m
 NEED_LIBERTAS=y
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2_6_27
 
 CONFIG_ORINOCO_USB=m
 
@@ -461,26 +498,28 @@ CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_ATH3K=m
 
+CONFIG_RTL8192CU=m
+
 endif #CONFIG_USB end of USB driver list
 
 ifdef CONFIG_SPI_MASTER
-ifndef CONFIG_COMPAT_KERNEL_25
+ifndef CONFIG_COMPAT_KERNEL_2_6_25
 
 ifdef CONFIG_CRC7
 CONFIG_WL1251_SPI=m
-CONFIG_WL1271_SPI=m
+CONFIG_WL12XX_SPI=m
 endif #CONFIG_CRC7
 CONFIG_P54_SPI=m
 
-ifdef CONFIG_COMPAT_KERNEL_27
+ifdef CONFIG_COMPAT_KERNEL_2_6_27
 CONFIG_LIBERTAS_SPI=n
 NEED_LIBERTAS=n
-else #CONFIG_COMPAT_KERNEL_27
+else #CONFIG_COMPAT_KERNEL_2_6_27
 CONFIG_LIBERTAS_SPI=m
 NEED_LIBERTAS=y
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2_6_27
 
-endif #CONFIG_COMPAT_KERNEL_25
+endif #CONFIG_COMPAT_KERNEL_2_6_25
 endif #CONFIG_SPI_MASTER end of SPI driver list
 
 ifdef CONFIG_MMC
@@ -489,23 +528,27 @@ CONFIG_SSB_SDIOHOST=y
 CONFIG_B43_SDIO=y
 
 ifdef CONFIG_CRC7
-CONFIG_WL1251_SDIO=m
+ifdef CONFIG_WL12XX_PLATFORM_DATA
+CONFIG_COMPAT_WL1251_SDIO=m
+endif #CONFIG_WL12XX_PLATFORM_DATA
 
-ifndef CONFIG_COMPAT_KERNEL_32
+ifndef CONFIG_COMPAT_KERNEL_2_6_32
 ifdef CONFIG_WL12XX_PLATFORM_DATA
-CONFIG_WL1271_SDIO=m
+CONFIG_COMPAT_WL12XX_SDIO=m
 endif #CONFIG_WL12XX_PLATFORM_DATA
-endif #CONFIG_COMPAT_KERNEL_32
+endif #CONFIG_COMPAT_KERNEL_2_6_32
 
 endif #CONFIG_CRC7
 
-ifdef CONFIG_COMPAT_KERNEL_27
+CONFIG_MWIFIEX_SDIO=m
+
+ifdef CONFIG_COMPAT_KERNEL_2_6_27
 CONFIG_LIBERTAS_SDIO=n
 NEED_LIBERTAS=n
-else #CONFIG_COMPAT_KERNEL_27
+else #CONFIG_COMPAT_KERNEL_2_6_27
 CONFIG_LIBERTAS_SDIO=m
 NEED_LIBERTAS=y
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2_6_27
 
 CONFIG_IWM=m
 # CONFIG_IWM_DEBUG=y
@@ -513,10 +556,8 @@ CONFIG_IWM=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_MRVL_SDIO=m
 
-ifneq ($(CONFIG_COMPAT_STAGING),)
+ifdef CONFIG_COMPAT_STAGING
 ifdef CONFIG_WIRELESS_EXT
-CONFIG_ATH6KL_CFG80211=y
-CONFIG_ATH6KL_DEBUG=y
 # CONFIG_ATH6KL_DISABLE_TARGET_DBGLOGS is not set
 # CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set
 # CONFIG_ATH6KL_ENABLE_HOST_DEBUG is not set
@@ -527,66 +568,77 @@ CONFIG_ATH6KL_ENABLE_TARGET_DEBUG_PRINTS=y
 CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y
 CONFIG_ATH6K_LEGACY=m
 
-CONFIG_BRCM80211=m
-CONFIG_BRCM80211_PCI=y
+CONFIG_BRCMFMAC=m
 
 endif #CONFIG_WIRELESS_EXT
-endif #CONFIG_MMC
+endif #CONFIG_COMPAT_STAGING
+
 
+endif #CONFIG_MMC
 
-endif # end of SDIO driver list
+CONFIG_RTLWIFI=m
+CONFIG_RTL8192C_COMMON=m
 
 # Common rt2x00 requirements
 ifeq ($(NEED_RT2X00),y)
 CONFIG_RT2X00=y
 CONFIG_RT2X00_LIB=m
 CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_HT=y
 CONFIG_RT2X00_LIB_FIRMWARE=y
 CONFIG_RT2X00_LIB_CRYPTO=y
-ifdef CONFIG_COMPAT_KERNEL_25
+# CONFIG_RT2X00_LIB_SOC=y
+ifdef CONFIG_COMPAT_KERNEL_2_6_25
 CONFIG_RT2X00_LIB_LEDS=n
-else #CONFIG_COMPAT_KERNEL_25
+else #CONFIG_COMPAT_KERNEL_2_6_25
+ifdef CONFIG_LEDS_CLASS
 CONFIG_RT2X00_LIB_LEDS=y
-endif #CONFIG_COMPAT_KERNEL_25
+endif #CONFIG_LEDS_CLASS
+endif #CONFIG_COMPAT_KERNEL_2_6_25
 # CONFIG_RT2X00_DEBUG=y
 # CONFIG_RT2X00_LIB_DEBUGFS
 endif
 
-ifeq ($(NEED_RT2X00_FIRMWARE),y)
-CONFIG_RT2X00_LIB_FIRMWARE=y
-endif
-
 # p54
 CONFIG_P54_COMMON=m
+ifdef CONFIG_MAC80211_LEDS
 CONFIG_P54_LEDS=y
+endif #CONFIG_MAC80211_LEDS
 
 # Atheros
 CONFIG_ATH_COMMON=m
 CONFIG_ATH_DEBUG=y
 
-CONFIG_WL12XX=y
+ifdef CONFIG_COMPAT_STAGING
+CONFIG_BRCMUTIL=m
+# CONFIG_BRCMDBG=y
+endif #CONFIG_COMPAT_STAGING
+
 ifdef CONFIG_CRC7
 CONFIG_WL1251=m
-CONFIG_WL1271=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_HT=y
 endif #CONFIG_CRC7
 
-ifdef CONFIG_COMPAT_KERNEL_27
+CONFIG_MWIFIEX=m
+
+ifdef CONFIG_COMPAT_KERNEL_2_6_27
 CONFIG_LIBERTAS=n
-else #CONFIG_COMPAT_KERNEL_27
+else #CONFIG_COMPAT_KERNEL_2_6_27
 ifeq ($(NEED_LIBERTAS),y)
 CONFIG_LIBERTAS_THINFIRM=m
 CONFIG_LIBERTAS=m
 CONFIG_LIBERTAS_MESH=y
 # CONFIG_LIBERTAS_DEBUG=y
 endif
-endif #CONFIG_COMPAT_KERNEL_27
+endif #CONFIG_COMPAT_KERNEL_2_6_27
 
 # We need the backported rfkill module on kernel < 2.6.31.
 # In more recent kernel versions use the in kernel rfkill module.
-ifdef CONFIG_COMPAT_KERNEL_31
+ifdef CONFIG_COMPAT_KERNEL_2_6_31
 CONFIG_RFKILL_BACKPORT=m
+ifdef CONFIG_LEDS_TRIGGERS
 CONFIG_RFKILL_BACKPORT_LEDS=y
+endif #CONFIG_LEDS_TRIGGERS
 CONFIG_RFKILL_BACKPORT_INPUT=y
-endif #CONFIG_COMPAT_KERNEL_31
+endif #CONFIG_COMPAT_KERNEL_2_6_31