Use the more common pr_warn.
Other miscellanea:
o Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
MAX_MODULE_SOFTRESET_WAIT, c);
if (c == MAX_MODULE_SOFTRESET_WAIT)
- pr_warning("dss_core: waiting for reset to finish failed\n");
+ pr_warn("dss_core: waiting for reset to finish failed\n");
else
pr_debug("dss_core: softreset done\n");
MAX_MODULE_SOFTRESET_WAIT, c);
if (c == MAX_MODULE_SOFTRESET_WAIT)
- pr_warning("%s: %s: softreset failed (waited %d usec)\n",
- __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+ pr_warn("%s: %s: softreset failed (waited %d usec)\n",
+ __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
else
pr_debug("%s: %s: softreset in %d usec\n", __func__,
oh->name, c);
MAX_MODULE_SOFTRESET_WAIT, c);
if (c == MAX_MODULE_SOFTRESET_WAIT)
- pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+ pr_warn("%s: %s: softreset failed (waited %d usec)\n",
__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
else
pr_debug("%s: %s: softreset in %d usec\n", __func__,
MAX_MODULE_SOFTRESET_WAIT, c);
if (c == MAX_MODULE_SOFTRESET_WAIT)
- pr_warning("%s: %s: softreset failed (waited %d usec)\n",
- __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+ pr_warn("%s: %s: softreset failed (waited %d usec)\n",
+ __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
else
pr_debug("%s: %s: softreset in %d usec\n", __func__,
oh->name, c);
"hwmod_io", omap_mux_late_init);
if (ret)
- pr_warning("mux: Failed to setup hwmod io irq %d\n", ret);
+ pr_warn("mux: Failed to setup hwmod io irq %d\n", ret);
return 0;
}
oh->_clk = clk_get(NULL, oh->main_clk);
if (IS_ERR(oh->_clk)) {
- pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
- oh->name, oh->main_clk);
+ pr_warn("omap_hwmod: %s: cannot clk_get main_clk %s\n",
+ oh->name, oh->main_clk);
return -EINVAL;
}
/*
c = clk_get(NULL, os->clk);
if (IS_ERR(c)) {
- pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
- oh->name, os->clk);
+ pr_warn("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
+ oh->name, os->clk);
ret = -EINVAL;
continue;
}
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
c = clk_get(NULL, oc->clk);
if (IS_ERR(c)) {
- pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
- oh->name, oc->clk);
+ pr_warn("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
+ oh->name, oc->clk);
ret = -EINVAL;
continue;
}
oh->clkdm = clkdm_lookup(oh->clkdm_name);
if (!oh->clkdm) {
- pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n",
+ pr_warn("omap_hwmod: %s: could not associate to clkdm %s\n",
oh->name, oh->clkdm_name);
return 0;
}
if (!ret)
oh->_state = _HWMOD_STATE_CLKS_INITED;
else
- pr_warning("omap_hwmod: %s: cannot _init_clocks\n", oh->name);
+ pr_warn("omap_hwmod: %s: cannot _init_clocks\n", oh->name);
return ret;
}
_disable_clocks(oh);
if (ret == -EBUSY)
- pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
+ pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name);
if (!ret) {
/*
c = _wait_softreset_complete(oh);
if (c == MAX_MODULE_SOFTRESET_WAIT) {
- pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
- oh->name, MAX_MODULE_SOFTRESET_WAIT);
+ pr_warn("omap_hwmod: %s: softreset failed (waited %d usec)\n",
+ oh->name, MAX_MODULE_SOFTRESET_WAIT);
ret = -ETIMEDOUT;
goto dis_opt_clks;
} else {
if (oh->rst_lines_cnt == 0) {
r = _enable(oh);
if (r) {
- pr_warning("omap_hwmod: %s: cannot be enabled for reset (%d)\n",
- oh->name, oh->_state);
+ pr_warn("omap_hwmod: %s: cannot be enabled for reset (%d)\n",
+ oh->name, oh->_state);
return -EINVAL;
}
}
/* set IBE to 1 */
rx51_secure_update_aux_cr(BIT(6), 0);
} else {
- pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n");
- pr_warning("Thumb binaries may crash randomly without this workaround\n");
+ pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n");
+ pr_warn("Thumb binaries may crash randomly without this workaround\n");
}
pr_info("RX-51: Registring OMAP3 HWRNG device\n");
int ret;
if (!omap3_has_io_chain_ctrl())
- pr_warning("PM: no software I/O chain control; some wakeups may be lost\n");
+ pr_warn("PM: no software I/O chain control; some wakeups may be lost\n");
pm_errata_configure();
unsigned long volt = voltdm_get_voltage(sr->voltdm);
if (!volt) {
- pr_warning("%s: Curr voltage unknown. Cannot enable %s\n",
- __func__, sr->name);
+ pr_warn("%s: Curr voltage unknown. Cannot enable %s\n",
+ __func__, sr->name);
return -ENODATA;
}
pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data));
if (IS_ERR(pdev))
- pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
+ pr_warn("%s: Could not build omap_device for %s: %s\n",
__func__, name, oh->name);
exit:
i++;
loop_cnt++;
if (retries_cnt > 10) {
- pr_warning("%s: Retry count exceeded\n", __func__);
+ pr_warn("%s: Retry count exceeded\n", __func__);
return -ETIMEDOUT;
}
unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
{
if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
+ pr_warn("%s: VDD specified does not exist!\n", __func__);
return 0;
}
unsigned long volt = 0;
if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
+ pr_warn("%s: VDD specified does not exist!\n", __func__);
return -EINVAL;
}
}
if (!volt) {
- pr_warning("%s: not scaling. OPP voltage for %lu, not found.\n",
- __func__, target_volt);
+ pr_warn("%s: not scaling. OPP voltage for %lu, not found.\n",
+ __func__, target_volt);
return -EINVAL;
}
unsigned long target_volt;
if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
+ pr_warn("%s: VDD specified does not exist!\n", __func__);
return;
}
struct omap_volt_data **volt_data)
{
if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
+ pr_warn("%s: VDD specified does not exist!\n", __func__);
return;
}
int i;
if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
+ pr_warn("%s: VDD specified does not exist!\n", __func__);
return ERR_PTR(-EINVAL);
}
if (!voltdm->volt_data) {
- pr_warning("%s: voltage table does not exist for vdd_%s\n",
+ pr_warn("%s: voltage table does not exist for vdd_%s\n",
__func__, voltdm->name);
return ERR_PTR(-ENODATA);
}
struct omap_voltdm_pmic *pmic)
{
if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
+ pr_warn("%s: VDD specified does not exist!\n", __func__);
return -EINVAL;
}
int voltscale_method)
{
if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
+ pr_warn("%s: VDD specified does not exist!\n", __func__);
return;
}
sys_ck = clk_get(NULL, voltdm->sys_clk.name);
if (IS_ERR(sys_ck)) {
- pr_warning("%s: Could not get sys clk.\n", __func__);
+ pr_warn("%s: Could not get sys clk.\n", __func__);
return -EINVAL;
}
voltdm->sys_clk.rate = clk_get_rate(sys_ck);
udelay(oh->class->sysc->srst_udelay);
if (c == MAX_MODULE_SOFTRESET_WAIT)
- pr_warning("%s: %s: softreset failed (waited %d usec)\n",
- __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+ pr_warn("%s: %s: softreset failed (waited %d usec)\n",
+ __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
else
pr_debug("%s: %s: softreset in %d usec\n", __func__,
oh->name, c);