ucidef_set_interface_lan "eth0.2"
;;
3g-6200n|\
- ac1200pro|\
ai-br100|\
d240|\
db-wrt01|\
zbt-we826|\
zbt-wg2626|\
zbt-wg3526-16M|\
+ zbt-wg3526-32M|\
zbt-wr8305rt)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
wn3000rpv3)
status_led="$board:red:power"
;;
- ac1200pro|\
+ ai-br100|\
+ ht-tm02)
+ status_led="$board:blue:wlan"
+ ;;
all0239-3g|\
dcs-930|\
dir-300-b1|\
zbt-wg2626)
status_led="$board:green:status"
;;
- ai-br100|\
- ht-tm02)
- status_led="$board:blue:wlan"
- ;;
asl26555-8M|\
asl26555-16M)
status_led="asl26555:green:power"
zbt-cpe102)
status_led="$board:green:4g-0"
;;
- zbt-wg3526-16M)
+ zbt-wg3526-16M|\
+ zbt-wg3526-32M)
status_led="zbt-wg3526:green:status"
;;
esac
*"DCS-930L B1")
name="dcs-930l-b1"
;;
- *"Digineo AC1200 Pro")
- name="ac1200pro"
- ;;
*"DIR-300 B1")
name="dir-300-b1"
;;
*"ZBT-WG3526 (16M)")
name="zbt-wg3526-16M"
;;
+ *"ZBT-WG3526 (32M)")
+ name="zbt-wg3526-32M"
+ ;;
*"ZBT-WR8305RT")
name="zbt-wr8305rt"
;;
3g150b|\
3g300m|\
a5-v11|\
- ac1200pro|\
ai-br100|\
air3gii|\
all0239-3g|\
zbt-we826|\
zbt-wg2626|\
zbt-wg3526-16M|\
+ zbt-wg3526-32M|\
zbt-wr8305rt|\
zte-q7|\
youku-yk1)
+++ /dev/null
-/dts-v1/;
-
-#include "ZBT-WG3526.dtsi"
-
-/ {
- model = "Digineo AC1200 Pro";
-};
-
-&firmware {
- reg = <0x50000 0x1fb0000>;
-};
-
-&status_led {
- label = "ac1200pro:green:status";
-};
&firmware {
reg = <0x50000 0xfb0000>;
};
-
-&status_led {
- label = "zbt-wg3526:green:status";
-};
--- /dev/null
+/dts-v1/;
+
+#include "ZBT-WG3526.dtsi"
+
+/ {
+ model = "ZBT-WG3526 (32M)";
+};
+
+&firmware {
+ reg = <0x50000 0x1fb0000>;
+};
gpio-leds {
compatible = "gpio-leds";
- status_led: status {
+ status {
+ label = "zbt-wg3526:green:status";
gpios = <&gpio0 24 1>;
};
};
endef
TARGET_DEVICES += 11acnas
-define Device/ac1200pro
- DTS := AC1200pro
- IMAGE_SIZE := $(ralink_default_fw_size_32M)
- DEVICE_TITLE := Digineo AC1200 Pro
- DEVICE_PACKAGES := kmod-usb3 kmod-ata-core kmod-ata-ahci
-endef
-TARGET_DEVICES += ac1200pro
-
define Device/dir-860l-b1
DTS := DIR-860L-B1
BLOCKSIZE := 64k
endef
TARGET_DEVICES += zbt-wg3526-16M
+define Device/zbt-wg3526-32M
+ DTS := ZBT-WG3526-32M
+ IMAGE_SIZE := $(ralink_default_fw_size_32M)
+ SUPPORTED_DEVICES += ac1200pro
+ DEVICE_TITLE := ZBT WG3526 (32MB flash)
+ DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-ata-core kmod-ata-ahci kmod-sdhci-mt7620
+endef
+TARGET_DEVICES += zbt-wg3526-32M
+
# FIXME: is this still needed?
define Image/Prepare
#define Build/Compile