--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7621_iodata_wn-xx-xr.dtsi"
+
+/ {
+ compatible = "iodata,wn-dx1167r", "mediatek,mt7621-soc";
+ model = "I-O DATA WN-DX1167R";
+};
+
+&partitions {
+ partition@6b00000 {
+ label = "idmkey";
+ reg = <0x6b00000 0x0100000>;
+ read-only;
+ };
+
+ partition@6c00000 {
+ label = "Backup";
+ reg = <0x6c00000 0x1380000>;
+ read-only;
+ };
+};
+
+&pcie1 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "iodata:green:wps";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "iodata:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ repeater {
+ label = "repeater";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x0100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ reg = <0x0100000 0x0100000>;
+ read-only;
+ };
+
+ factory: partition@200000 {
+ label = "factory";
+ reg = <0x0200000 0x0100000>;
+ };
+
+ partition@300000 {
+ label = "SecondBoot";
+ reg = <0x0300000 0x0100000>;
+ read-only;
+ };
+
+ partition@400000 {
+ label = "kernel";
+ reg = <0x0400000 0x0400000>;
+ };
+
+ partition@800000 {
+ label = "ubi";
+ reg = <0x0800000 0x2e00000>;
+ };
+
+ partition@3600000 {
+ label = "Config";
+ reg = <0x3600000 0x0100000>;
+ read-only;
+ };
+
+ partition@3700000 {
+ label = "firmware_2";
+ reg = <0x3700000 0x3200000>;
+ };
+
+ partition@6900000 {
+ label = "Config_2";
+ reg = <0x6900000 0x0100000>;
+ read-only;
+ };
+
+ partition@6a00000 {
+ label = "persist";
+ reg = <0x6a00000 0x0100000>;
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&state_default {
+ gpio {
+ ralink,group = "uart2", "uart3", "wdt";
+ ralink,function = "gpio";
+ };
+};
+
+&xhci {
+ status = "disabled";
+};
fi
endef
+define Build/iodata-mstc-header
+ ( \
+ data_size_crc="$$(dd if=$@ ibs=64 skip=1 2>/dev/null | \
+ gzip -c | tail -c 8 | od -An -tx8 --endian little | tr -d ' \n')"; \
+ echo -ne "$$(echo $$data_size_crc | sed 's/../\\x&/g')" | \
+ dd of=$@ bs=8 count=1 seek=7 conv=notrunc 2>/dev/null; \
+ )
+ dd if=/dev/zero of=$@ bs=4 count=1 seek=1 conv=notrunc 2>/dev/null
+ ( \
+ header_crc="$$(dd if=$@ bs=64 count=1 2>/dev/null | \
+ gzip -c | tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
+ echo -ne "$$(echo $$header_crc | sed 's/../\\x&/g')" | \
+ dd of=$@ bs=4 count=1 seek=1 conv=notrunc 2>/dev/null; \
+ )
+endef
+
define Build/ubnt-erx-factory-image
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
echo '21001:6' > $(1).compat; \
endef
TARGET_DEVICES += iodata_wn-ax1167gr
+define Device/iodata_wn-dx1167r
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ UIMAGE_MAGIC := 0x434f4d43
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 51200k
+ DEVICE_VENDOR := I-O DATA
+ DEVICE_MODEL := WN-DX1167R
+ KERNEL_INITRAMFS := $(KERNEL_DTB) | custom-initramfs-uimage 3.10(XIK.1)b10 | \
+ iodata-mstc-header
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := kmod-mt7615e wpad-basic
+endef
+TARGET_DEVICES += iodata_wn-dx1167r
+
define Device/iodata_wn-gx300gr
IMAGE_SIZE := 7616k
DEVICE_VENDOR := I-O DATA
elecom,wrc-1900gst|\
elecom,wrc-2533gst|\
iodata,wn-ax1167gr|\
+ iodata,wn-dx1167r|\
iodata,wn-gx300gr|\
iodata,wnpr2600g|\
iptime,a8004t)
xiaoyu,xy-c5)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
;;
+ iodata,wn-dx1167r|\
+ xiaomi,mir3g-v2)
+ wan_mac=$(mtd_get_mac_binary factory 0xe006)
+ label_mac=$wan_mac
+ ;;
iodata,wnpr2600g)
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
label_mac=$wan_mac
lan_mac=$(mtd_get_mac_binary factory 0xe006)
label_mac=$lan_mac
;;
- xiaomi,mir3g-v2)
- wan_mac=$(mtd_get_mac_binary factory 0xe006)
- label_mac=$wan_mac
- ;;
zbtlink,zbt-we1326)
wan_mac=$(mtd_get_mac_binary factory 0xe006)
label_mac=$(mtd_get_mac_binary factory 0x4)
--- /dev/null
+#
+# Copyright (C) 2019 OpenWrt.org
+#
+
+. /lib/functions.sh
+
+iodata_mstc_prepare_fail() {
+ echo "failed to check and prepare the environment, rebooting..."
+ umount -a
+ reboot -f
+}
+
+# I-O DATA devices manufactured by MSTC (MitraStar Technology Corp.)
+# have two important flags:
+# - bootnum: switch between two os images
+# use 1st image in OpenWrt
+# - debugflag: enable/disable debug
+# users can interrupt Z-Loader for recovering the device if enabled
+iodata_mstc_upgrade_prepare() {
+ local persist_mtd="$(find_mtd_part persist)"
+ local factory_mtd="$(find_mtd_part factory)"
+
+ if [ -z "$persist_mtd" -o -z "$factory_mtd" ]; then
+ echo 'cannot find mtd partition(s), "factory" or "persist"'
+ iodata_mstc_prepare_fail
+ fi
+
+ local bootnum=$(hexdump -s 4 -n 1 -e '"%x"' ${persist_mtd})
+ local debugflag=$(hexdump -s 65141 -n 1 -e '"%x"' ${factory_mtd})
+
+ if [ "$bootnum" != "1" -a "$bootnum" != "2" ]; then
+ echo "failed to get bootnum, please check the value at 0x4 in ${persist_mtd}"
+ iodata_mstc_prepare_fail
+ fi
+ if [ "$debugflag" != "0" -a "$debugflag" != "1" ]; then
+ echo "failed to get debugflag, please check the value at 0xFE75 in ${factory_mtd}"
+ iodata_mstc_prepare_fail
+ fi
+ echo "current: bootnum => ${bootnum}, debugflag => ${debugflag}"
+
+ if [ "$bootnum" = "2" ]; then
+ if ! (echo -ne "\x01" | dd bs=1 count=1 seek=4 conv=notrunc of=${persist_mtd} 2>/dev/null); then
+ echo "failed to set bootnum"
+ iodata_mstc_prepare_fail
+ fi
+ echo "### switch to 1st os-image on next boot ###"
+ fi
+ if [ "$debugflag" = "0" ]; then
+ if ! (echo -ne "\x01" | dd bs=1 count=1 seek=65141 conv=notrunc of=${factory_mtd} 2>/dev/null); then
+ echo "failed to set debugflag"
+ iodata_mstc_prepare_fail
+ fi
+ echo "### enable debug ###"
+ fi
+}
xiaomi,mir3p)
nand_do_upgrade "$1"
;;
+ iodata,wn-dx1167r)
+ iodata_mstc_upgrade_prepare
+ nand_do_upgrade "$1"
+ ;;
ubiquiti,edgerouterx|\
ubiquiti,edgerouterx-sfp)
platform_upgrade_ubnt_erx "$1"
projects / openwrt / staging / hauke.git / commitdiff