brcm47xx: fix switch handling

This fixes some problems with the switch handling

 * It now send the messages again to indicate a button for failsafe mode should be pressed
 * it does not leak packages between wan and lan any more
 * the switch works again in normal mode

The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.

This should close #13869, #13868 and #13716

SVN-Revision: 37286

diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
index ac18e0baf2132da2e43668c1c889e63b0d80bb35..76382e5ceebaeef2b8636d81fe6d55be81e3ec8d 100644 (file)
--- a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
+++ b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
@@ -11,7 +11,17 @@ set_preinit_iface() {
                "ASUS (unknown, BCM4702)") ifname=eth1;;
                "Sitecom WL-105b") ifname=eth1;;
        esac
+
+       # The interface has to be up to configure the switch
        ifconfig $ifname 0.0.0.0 up
+       [ -f /lib/modules/`uname -r`/switch-robo.ko ] && {
+               rmmod switch-robo
+               insmod switch-robo
+       }
+       [ -f /lib/modules/`uname -r`/switch-adm.ko ] && {
+               rmmod switch-adm
+               insmod switch-adm
+       }
 }
 
 init_iface() {

diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
index dd8fd6e9f63ec2d698d1bf5b38cf80ff92ec3268..7e030acfff80957683f5d753ed1348491bbeceda 100644 (file)
--- a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
+++ b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
@@ -2,13 +2,17 @@
 
 failsafe_ip() {
        [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
-               ifconfig eth0 0.0.0.0 down
+               # The switch will connect all ports, The switch will leak
+               # packages from wan to lan and vice versa in failsafe mode
+               echo 1 > /proc/switch/eth0/reset
+               echo 1 > /proc/switch/eth0/enable
+               echo 0 > /proc/switch/eth0/enable_vlan
                echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
        }
 
        [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
                ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
-        }
+       }
 }
 
 boot_hook_add failsafe failsafe_ip

diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
index 8c425a094ec722859721e725cbb7dde5c0e1ee7a..bc749398f55c55942c3ce6544b76341012c634f8 100644 (file)
--- a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
+++ b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
@@ -1,37 +1,34 @@
 #!/bin/sh
 
-port_net_echo() {
-       [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
-               if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then
-                       netmsg $pi_broadcast "$1"
-               fi
-       }
-}
-
-preinit_ip_deconfig() {
-       if [ -z "$pi_ifname" ]; then
-               ifconfig $ifname 0.0.0.0 down
-       else
-               grep -q "$pi_ifname" /proc/net/dev && {
-                       ifconfig $pi_ifname 0.0.0.0 down
-               }
-       fi
-}
-
-preinit_net_echo() {
+preinit_net_echo_send() {
        preinit_ip
 
        [ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && {
+
                echo 1 > /proc/switch/eth0/reset
+               echo 1 > /proc/switch/eth0/enable
+               echo 1 > /proc/switch/eth0/enable_vlan
 
                # this would be easier if we blasted the message across all ports
                # but we don't want packets leaking across interfaces
                for port in $(seq 0 4); do {
+
                        echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
-                       port_net_echo $1
+                       sleep 1
+
+                       netmsg $pi_broadcast "$1"
                }; done
 
-               echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
+       } || netmsg $pi_broadcast "$1"
+}
 
-       } || port_net_echo $1
+preinit_net_echo() {
+       [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
+               { 
+                       [ "$pi_preinit_net_messages" = "y" ] || {
+                               [ "$pi_failsafe_net_message"  = "true" ] && 
+                                   [ "$pi_preinit_no_failsafe_netmsg" != "y" ] 
+                        }
+               } && preinit_net_echo_send $1
+       }
 }

diff --git a/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm
deleted file mode 100644 (file)
index 2b0d2cc..0000000
--- a/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-indicate_failsafe() {
-       preinit_net_echo() {
-               port_net_echo $1
-       }
-       echo "- failsafe -"
-       preinit_net_echo "Entering Failsafe!\n"
-       indicate_failsafe_led
-}