--- /dev/null
+From 9e3003f79d168eac7ee65cd457e3904e2fb4eea8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 13 Dec 2023 13:13:54 +0100
+Subject: [PATCH] fw_env: keep calling read() until whole flash block is read
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's totally valid for read() to provide less bytes than requested
+maximum. It may happen if there is no more data available yet or source
+pushes data in small chunks.
+
+This actually happens when trying to read env data from NVMEM device.
+Kernel may provide NVMEM content in page size parts (like 4096 B).
+
+This fixes warnings like:
+Warning on /sys/bus/nvmem/devices/u-boot-env0/nvmem: Attempted to read 16384 bytes but got 4096
+Warning on /sys/bus/nvmem/devices/u-boot-env0/nvmem: Attempted to read 12288 bytes but got 4096
+Warning on /sys/bus/nvmem/devices/u-boot-env0/nvmem: Attempted to read 8192 bytes but got 4096
+
+Since the main loop in flash_read_buf() is used to read blocks this
+patch adds a new nested one.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ tools/env/fw_env.c | 34 +++++++++++++++-------------------
+ 1 file changed, 15 insertions(+), 19 deletions(-)
+
+--- a/tools/env/fw_env.c
++++ b/tools/env/fw_env.c
+@@ -948,29 +948,25 @@ static int flash_read_buf(int dev, int f
+ */
+ lseek(fd, blockstart + block_seek, SEEK_SET);
+
+- rc = read(fd, buf + processed, readlen);
+- if (rc == -1) {
+- fprintf(stderr, "Read error on %s: %s\n",
+- DEVNAME(dev), strerror(errno));
+- return -1;
+- }
++ while (readlen) {
++ rc = read(fd, buf + processed, readlen);
++ if (rc == -1) {
++ fprintf(stderr, "Read error on %s: %s\n",
++ DEVNAME(dev), strerror(errno));
++ return -1;
++ }
+ #ifdef DEBUG
+- fprintf(stderr, "Read 0x%x bytes at 0x%llx on %s\n",
+- rc, (unsigned long long)blockstart + block_seek,
+- DEVNAME(dev));
++ fprintf(stderr, "Read 0x%x bytes at 0x%llx on %s\n",
++ rc, (unsigned long long)blockstart + block_seek,
++ DEVNAME(dev));
+ #endif
+- processed += rc;
+- if (rc != readlen) {
+- fprintf(stderr,
+- "Warning on %s: Attempted to read %zd bytes but got %d\n",
+- DEVNAME(dev), readlen, rc);
++ processed += rc;
+ readlen -= rc;
+- block_seek += rc;
+- } else {
+- blockstart += blocklen;
+- readlen = min(blocklen, count - processed);
+- block_seek = 0;
+ }
++
++ blockstart += blocklen;
++ readlen = min(blocklen, count - processed);
++ block_seek = 0;
+ }
+
+ return processed;
--- /dev/null
+From d73a6641868029b5cae53ed00c5766921c9d8b1f Mon Sep 17 00:00:00 2001
+From: Anthony Loiseau <anthony.loiseau@allcircuits.com>
+Date: Thu, 21 Dec 2023 23:44:38 +0100
+Subject: [PATCH] fw_env: autodetect NAND erase size and env sectors
+
+As already done for NOR chips, if device ESIZE and ENVSECTORS static
+configurations are both zero, then autodetect them at runtime.
+
+Cc: Joe Hershberger <joe.hershberger@ni.com>
+cc: Stefan Agner <stefan@agner.ch>
+cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
+Signed-off-by: Anthony Loiseau <anthony.loiseau@allcircuits.com>
+---
+ tools/env/README | 3 +++
+ tools/env/fw_env.c | 11 +++++++++--
+ 2 files changed, 12 insertions(+), 2 deletions(-)
+
+--- a/tools/env/README
++++ b/tools/env/README
+@@ -58,6 +58,9 @@ DEVICEx_ENVSECTORS defines the number of
+ this environment instance. On NAND this is used to limit the range
+ within which bad blocks are skipped, on NOR it is not used.
+
++If DEVICEx_ESIZE and DEVICEx_ENVSECTORS are both zero, then a runtime
++detection is attempted for NOR and NAND mtd types.
++
+ To prevent losing changes to the environment and to prevent confusing the MTD
+ drivers, a lock file at /run/fw_printenv.lock is used to serialize access
+ to the environment.
+--- a/tools/env/fw_env.c
++++ b/tools/env/fw_env.c
+@@ -1655,8 +1655,15 @@ static int check_device_config(int dev)
+ }
+ DEVTYPE(dev) = mtdinfo.type;
+ if (DEVESIZE(dev) == 0 && ENVSECTORS(dev) == 0 &&
+- mtdinfo.type == MTD_NORFLASH)
+- DEVESIZE(dev) = mtdinfo.erasesize;
++ mtdinfo.erasesize > 0) {
++ if (mtdinfo.type == MTD_NORFLASH)
++ DEVESIZE(dev) = mtdinfo.erasesize;
++ else if (mtdinfo.type == MTD_NANDFLASH) {
++ DEVESIZE(dev) = mtdinfo.erasesize;
++ ENVSECTORS(dev) =
++ mtdinfo.size / mtdinfo.erasesize;
++ }
++ }
+ if (DEVESIZE(dev) == 0)
+ /* Assume the erase size is the same as the env-size */
+ DEVESIZE(dev) = ENVSIZE(dev);