fixes ar9 / dgn3500 support

SVN-Revision: 34180

diff --git a/target/linux/lantiq/ar9/config-default b/target/linux/lantiq/ar9/config-default
index 7279cd3be45c3b4f947a9e474ec4a4fb9e596a4c..c45826ff82ae9fbab1d7ba99a8a895f08b3ab9c0 100644 (file)
--- a/target/linux/lantiq/ar9/config-default
+++ b/target/linux/lantiq/ar9/config-default
@@ -1,13 +1,15 @@
 CONFIG_ADM6996_PHY=y
 CONFIG_AR8216_PHY=y
-# CONFIG_ATMEL_PWM is not set
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_FSNOTIFY=y
 CONFIG_HAVE_MACH_CLKDEV=y
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_FAKE=y
+# CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HW_HAS_PCI=y
 CONFIG_INPUT=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_GPIO_BUTTONS is not set
 CONFIG_INPUT_POLLDEV=y
 CONFIG_IRQ_FORCED_THREADING=y
 # CONFIG_ISDN is not set
@@ -22,8 +24,10 @@ CONFIG_LANTIQ_MACH_NETGEAR=y
 CONFIG_LANTIQ_MACH_P2601HNFX=y
 CONFIG_LANTIQ_MACH_WBMR=y
 # CONFIG_LANTIQ_VRX200 is not set
+CONFIG_M25PXX_USE_FAST_READ=y
 CONFIG_MDIO_BOARDINFO=y
 CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_M25P80=y
 CONFIG_PCI=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCIE_LANTIQ is not set
@@ -36,5 +40,9 @@ CONFIG_RTL8306_PHY=y
 # CONFIG_SOC_SVIP is not set
 CONFIG_SOC_TYPE_XWAY=y
 CONFIG_SOC_XWAY=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
 CONFIG_USB_ARCH_HAS_XHCI=y
 CONFIG_USB_SUPPORT=y

diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-netgear.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-netgear.c
index 29b0728102a49f024ae96b54cb68726c55c30b69..bb28537bc0d71ce0514647f160739edbf4e08fab 100644 (file)
--- a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-netgear.c
+++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-netgear.c
@@ -22,6 +22,7 @@
 #include <linux/etherdevice.h>
 #include <linux/kobject.h>
 #include <linux/sysfs.h>
+#include <linux/rtl8366.h>
 
 #include <lantiq_soc.h>
 #include <irq.h>
@@ -149,6 +150,22 @@ static int __init setup_ethaddr(char *str)
 }
 __setup("ethaddr=", setup_ethaddr);
 
+#define smi_SCK                37
+#define smi_SDA                35
+
+static struct rtl8366_platform_data rtl8366rb_data = {
+       .gpio_sda = smi_SDA,
+       .gpio_sck = smi_SCK,
+};
+
+static struct platform_device rtl8366rb_device = {
+       .name = RTL8366RB_DRIVER_NAME,
+       .id = -1,
+       .dev = {
+               .platform_data  = &rtl8366rb_data,
+       }
+};
+
 static u16 dgn3500_eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS] = {0};
 
 static ssize_t ath_eeprom_read(struct file *filp, struct kobject *kobj,
@@ -231,6 +248,7 @@ static void __init dgn3500_init(void)
        ltq_pci_ath_fixup(14, dgn3500_eeprom_data);
        /* The usb power is always enabled, protected by a fuse */
        xway_register_dwc(-1);
+       platform_device_register(&rtl8366rb_device);
 }
 
 MIPS_MACHINE(LANTIQ_MACH_DGN3500B,