+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "edimax,3g-6200n", "ralink,rt3050-soc";
- model = "Edimax 3g-6200n";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@3e0000 {
- label = "cimage";
- reg = <0x3e0000 0x20000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "edimax,uimage";
- label = "firmware";
- reg = <0x50000 0x390000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "3g-6200n:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "3g-6200n:amber:wlan";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- 3g {
- label = "3g-6200n:blue:3g";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "wlanswitch";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "edimax,3g-6200nl", "ralink,rt3050-soc";
- model = "Edimax 3g-6200nl";
-
- aliases {
- led-boot = &led_internet;
- led-failsafe = &led_internet;
- led-running = &led_internet;
- led-upgrade = &led_internet;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@3e0000 {
- label = "cimage";
- reg = <0x3e0000 0x20000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "edimax,uimage";
- label = "firmware";
- reg = <0x50000 0x390000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_internet: internet {
- label = "3g-6200nl:green:internet";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "3g-6200nl:green:wlan";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portdisable = <0x37>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tenda,3g150b", "ralink,rt5350-soc";
- model = "Tenda 3G150B";
-
- aliases {
- led-boot = &led_ap;
- led-failsafe = &led_ap;
- led-running = &led_ap;
- led-upgrade = &led_ap;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_ap: ap {
- label = "3g150b:blue:ap";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- 3g {
- label = "3g150b:blue:3g";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb {
- gpio-export,name = "usb";
- gpio-export,output = <1>;
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf", "led";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tenda,3g300m", "ralink,rt3052-soc";
- model = "Tenda 3G300M";
-
- aliases {
- led-boot = &led_ap;
- led-failsafe = &led_ap;
- led-running = &led_ap;
- led-upgrade = &led_ap;
- };
-
- leds {
- compatible = "gpio-leds";
-
- 3grouter {
- label = "3g300m:blue:3grouter";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- led_ap: ap {
- label = "3g300m:blue:ap";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- wisprouter {
- label = "3g300m:blue:wisprouter";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wirelessrouter {
- label = "3g300m:blue:wirelessrouter";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
-
- 3g {
- label = "3g300m:blue:3g";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
-
- wpsreset {
- label = "3g300m:blue:wpsreset";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- mode {
- label = "mode";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "unbranded,a5-v11", "ralink,rt5350-soc";
- model = "A5-V11";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- system {
- label = "a5-v11:blue:system";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "a5-v11:red:power";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb {
- gpio-export,name = "usb";
- gpio-export,output = <1>;
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- root_hub {
- gpio-export,name = "root_hub";
- gpio-export,output = <1>;
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf", "led";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x1>;
- mediatek,portdisable = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "airlive,air3gii", "ralink,rt5350-soc";
- model = "AirLive Air3GII";
-
- leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "air3gii:green:wlan";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
-
- mobile {
- label = "air3gii:green:mobile";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ALL0256N.dtsi"
-
-/ {
- compatible = "allnet,all0256n-4m", "allnet,all0256n", "ralink,rt3050-soc";
- model = "Allnet ALL0256N (4M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3c8000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ALL0256N.dtsi"
-
-/ {
- compatible = "allnet,all0256n-8m", "allnet,all0256n", "ralink,rt3050-soc";
- model = "Allnet ALL0256N (8M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
+++ /dev/null
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "allnet,all0256n", "ralink,rt3050-soc";
-
- leds {
- compatible = "gpio-leds";
-
- rssilow {
- label = "all0256n:green:rssilow";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- rssimed {
- label = "all0256n:green:rssimed";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- rssihigh {
- label = "all0256n:green:rssihigh";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x3f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3352.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "allnet,all5002", "ralink,rt3352-soc";
- model = "Allnet ALL5002";
-
- i2c-gpio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- compatible = "i2c-gpio";
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
- i2c-gpio,delay-us = <10>;
-
- pcf0: iexp@38 {
- #gpio-cells = <2>;
- compatible = "inxp,pcf8574a";
- reg = <0x38>;
- gpio-controller;
- };
-
- hwmon@4b {
- compatible = "national,lm92";
- reg = <0x4b>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- ld1 {
- label = "all5002:green:ld1";
- gpios = <&pcf0 0 GPIO_ACTIVE_LOW>;
- };
-
- ld2 {
- label = "all5002:green:ld2";
- gpios = <&pcf0 1 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x3f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "allnet,all5003", "ralink,rt5350-soc";
- model = "Allnet ALL5003";
-
- i2c-gpio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- compatible = "i2c-gpio";
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
- i2c-gpio,delay-us = <10>;
-
- pcf0: iexp@38 {
- #gpio-cells = <2>;
- compatible = "inxp,pcf8574a";
- reg = <0x38>;
- gpio-controller;
- };
-
- hwmon@4b {
- compatible = "national,lm92";
- reg = <0x4b>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- ld1 {
- label = "all5003:green:ld1";
- gpios = <&pcf0 0 GPIO_ACTIVE_LOW>;
- };
-
- ld2 {
- label = "all5003:green:ld2";
- gpios = <&pcf0 1 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x3f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ASL26555.dtsi"
-
-/ {
- compatible = "alphanetworks,asl26555-16m", "alphanetworks,asl26555", "ralink,rt3050-soc";
- model = "Alpha ASL26555 (16M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition@fd0000 {
- label = "cert";
- reg = <0xfd0000 0x10000>;
- read-only;
- };
-
- partition@fe0000 {
- label = "langpack";
- reg = <0xfe0000 0x10000>;
- read-only;
- };
-
- devdata: partition@ff0000 {
- label = "devdata";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ASL26555.dtsi"
-
-/ {
- compatible = "alphanetworks,asl26555-8m", "alphanetworks,asl26555", "ralink,rt3050-soc";
- model = "Alpha ASL26555 (8M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- devdata: partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "rgdb";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x790000>;
- };
-
- partition@7e0000 {
- label = "cert";
- reg = <0x7e0000 0x10000>;
- read-only;
- };
-
- partition@7f0000 {
- label = "langpack";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-};
+++ /dev/null
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "alphanetworks,asl26555", "ralink,rt3050-soc";
-
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_green;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- eth {
- label = "asl26555:green:eth";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- };
-
- wan-red {
- label = "asl26555:red:wan";
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- };
-
- wan-green {
- label = "asl26555:green:wan";
- gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- };
-
- wlan {
- label = "asl26555:green:wlan";
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- led_power_green: power-green {
- label = "asl26555:green:power";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
-
- power-red {
- label = "asl26555:red:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- };
-
- 3g-green {
- label = "asl26555:green:3g";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
-
- 3g-red {
- label = "asl26555:red:3g";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&devdata 0x4004>;
-};
-
-&esw {
- mediatek,portmap = <0x1e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&devdata 0x4000>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "argus,atp-52b", "ralink,rt3052-soc";
- model = "Argus ATP-52B";
-
- aliases {
- led-boot = &led_run;
- led-failsafe = &led_run;
- led-running = &led_run;
- led-upgrade = &led_run;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "bootloader";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x30000 0x10000>;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7a0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_run: run {
- label = "atp-52b:green:run";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- net {
- label = "atp-52b:amber:net";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "asiarf,awapn2403", "ralink,rt3052-soc";
- model = "AsiaRF AWAPN2403";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- led-running = &led_wps;
- led-upgrade = &led_wps;
- };
-
-
- leds {
- compatible = "gpio-leds";
-
- led_wps: wps {
- label = "awapn2403:green:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "AWM002-EVB.dtsi"
-
-/ {
- compatible = "asiarf,awm002-evb-4m", "ralink,rt5350-soc";
- model = "AsiaRF AWM002 EVB (4M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80: m25p80@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "AWM002-EVB.dtsi"
-
-/ {
- compatible = "asiarf,awm002-evb-8m", "ralink,rt5350-soc";
- model = "AsiaRF AWM002 EVB (8M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80: m25p80@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
+++ /dev/null
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "asiarf,awm002-evb", "ralink,rt5350-soc";
-
- leds {
- compatible = "gpio-leds";
-
- tx {
- label = "awm002-evb:green:tx";
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
- };
-
- rx {
- label = "awm002-evb:green:rx";
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "awm002-evb:green:wps";
- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset_wps {
- label = "reset_wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- mode {
- label = "mode";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag";
- ralink,function = "gpio";
- };
- };
-};
-
-&esw {
- mediatek,portmap = <0x3f>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "nexaira,bc2", "ralink,rt3052-soc";
- model = "NexAira BC2";
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "bc2:blue:usb";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "hauppauge,broadway", "ralink,rt3052-soc";
- model = "Hauppauge Broadway";
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "bootloader";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x790000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- diskmounted {
- label = "broadway:red:diskmounted";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
-
- wps_active {
- label = "broadway:red:wps_active";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- factory {
- label = "Factory Reset button";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "8devices,carambola", "ralink,rt3050-soc";
- model = "8devices Carambola";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- i2c-gpio {
- compatible = "i2c-gpio";
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
- i2c-gpio,delay-us = <10>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x3f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "huawei,d105", "ralink,rt3050-soc";
- model = "Huawei D105";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "d105:red:power";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "d105:green:usb";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dap-1350", "ralink,rt3052-soc";
- model = "D-Link DAP-1350";
-
- aliases {
- led-boot = &led_power_blue;
- led-failsafe = &led_power_blue;
- led-running = &led_power_blue;
- led-upgrade = &led_power_blue;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- devdata: partition@30000 {
- label = "devdata";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "devconf";
- reg = <0x40000 0x30000>;
- read-only;
- };
-
- partition@70000 {
- label = "devlang";
- reg = <0x70000 0x40000>;
- read-only;
- };
-
- partition@b0000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0xb0000 0x750000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_blue: power {
- label = "dap-1350:blue:power";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- power2 {
- label = "dap-1350:red:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "dap-1350:blue:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- rt {
- label = "rt";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- ap {
- label = "ap";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&devdata 0x2e>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&devdata 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dcs-930", "ralink,rt3050-soc";
- model = "D-Link DCS-930";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x400000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wifi {
- label = "dcs-930:red:alert";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- led_status: status {
- label = "dcs-930:green:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "dcs-930:blue:wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dcs-930l-b1", "ralink,rt5350-soc";
- model = "D-Link DCS-930L B1";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "dcs-930l-b1:red:power";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "dcs-930l-b1:blue:wps";
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf", "led";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dir-300-b1", "ralink,rt3050-soc";
- model = "D-Link DIR-300 B1";
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_green;
- led-running = &led_status_green;
- led-upgrade = &led_status_green;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- devdata: partition@30000 {
- label = "devdata";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- status {
- label = "dir-300-b1:amber:status";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- led_status_green: status2 {
- label = "dir-300-b1:green:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "dir-300-b1:amber:wan";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- wan2 {
- label = "dir-300-b1:green:wan";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "dir-300-b1:blue:wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&devdata 0x4004>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&devdata 0x4000>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dir-300-b7", "ralink,rt5350-soc";
- model = "D-Link DIR-300 B7";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "dir-300-b7:green:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "dir-300-b7:blue:wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <0x17>;
-};
-
-&wmac {
- status = "okay";
- ralink,led-polarity = <1>;
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dir-320-b1", "ralink,rt5350-soc";
- model = "D-Link DIR-320 B1";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "dir-320-b1:green:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "dir-320-b1:green:usb";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "dir-320-b1:green:wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb {
- gpio-export,name = "usb";
- gpio-export,output = <1>;
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- root_hub {
- gpio-export,name = "root_hub";
- gpio-export,output = <1>;
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <0x17>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dir-600-b1", "ralink,rt3050-soc";
- model = "D-Link DIR-600 B1";
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_green;
- led-running = &led_status_green;
- led-upgrade = &led_status_green;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- devdata: partition@30000 {
- label = "devdata";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- status {
- label = "dir-600-b1:amber:status";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- led_status_green: status2 {
- label = "dir-600-b1:green:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "dir-600-b1:amber:wan";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- wan2 {
- label = "dir-600-b1:green:wan";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "dir-600-b1:blue:wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&devdata 0x4004>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&devdata 0x4000>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dir-610-a1", "ralink,rt5350-soc";
- model = "D-Link DIR-610 A1";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "dir-610-a1:green:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "dir-610-a1:green:wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- devdata: partition@30000 {
- label = "devdata";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "seama";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&devdata 0x4004>;
-};
-
-&esw {
- status = "okay";
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <0x17>;
-};
-
-&wmac {
- status = "okay";
- ralink,led-polarity = <1>;
- ralink,mtd-eeprom = <&devdata 0x4000>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dir-615-d", "ralink,rt3050-soc";
- model = "D-Link DIR-615 D";
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_green;
- led-running = &led_status_green;
- led-upgrade = &led_status_green;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- devdata: partition@30000 {
- label = "devdata";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- status {
- label = "dir-615-d:amber:status";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- led_status_green: status2 {
- label = "dir-615-d:green:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- wan {
- label = "dir-615-d:amber:wan";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- wan2 {
- label = "dir-615-d:green:wan";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "dir-615-d:blue:wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&devdata 0x4000>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-
+++ /dev/null
-/dts-v1/;
-
-#include "rt3352.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dir-615-h1", "ralink,rt3352-soc";
- model = "D-Link DIR-615 H1";
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_green;
- led-running = &led_status_green;
- led-upgrade = &led_status_green;
- };
-
- leds {
- compatible = "gpio-leds";
-
- status {
- label = "dir-615-h1:amber:status";
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- led_status_green: status2 {
- label = "dir-615-h1:green:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- wan {
- label = "dir-615-h1:amber:wan";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- wan2 {
- label = "dir-615-h1:green:wan";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "dir-615-h1:blue:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins &mdio_pins>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dir-620-a1", "ralink,rt3050-soc";
- model = "D-Link DIR-620 A1";
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_green;
- led-running = &led_status_green;
- led-upgrade = &led_status_green;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- status {
- label = "dir-620-a1:amber:status";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- led_status_green: status2 {
- label = "dir-620-a1:green:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "dir-620-a1:amber:wan";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- wan2 {
- label = "dir-620-a1:green:wan";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "dir-620-a1:blue:wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
-
- wps2 {
- label = "dir-620-a1:amber:wps";
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3352.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dir-620-d1", "ralink,rt3352-soc";
- model = "D-Link DIR-620 D1";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "dir-620-d1:green:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "dir-620-d1:green:wifi";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset_wps {
- label = "reset_wps";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins &mdio_pins>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "dlink,dwr-512-b", "ralink,rt5350-soc";
- model = "D-Link DWR-512 B";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- sms {
- label = "dwr-512-b:green:sms";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
- led_status: status {
- label = "dwr-512-b:green:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
- 2g {
- label = "dwr-512-b:green:2g";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
- 3g {
- label = "dwr-512-b:green:3g";
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
- };
- sstrengthr {
- label = "dwr-512-b:red:sigstrength";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- };
- sstrengthg {
- label = "dwr-512-b:green:sigstrength";
- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- slic_int {
- gpio-export,name = "slic_int";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- };
- modem3g_enable {
- gpio-export,name = "modem3g_enable";
- gpio-export,output = <1>;
- gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <30000000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "jboot";
- reg = <0x0 0x10000>;
- read-only;
- };
-
- partition@10000 {
- compatible = "amit,jimage";
- label = "firmware";
- reg = <0x10000 0x7e0000>;
- };
-
- config: partition@7f0000 {
- label = "config";
- reg = <0x7f0000 0x10000>;
- };
- };
- };
-};
-
-&spi1 {
- status = "okay";
-
- spidev@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "siliconlabs,si3210";
-
- reg = <0>;
- spi-max-frequency = <1000000>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-ðernet {
- mtd-mac-address = <&config 0xe07e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&config 0xe08a>;
- ralink,led-polarity = <1>;
- mtd-mac-address = <&config 0xe07e>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "engenius,esr-9753", "ralink,rt3052-soc";
- model = "Senao / EnGenius ESR-9753";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "esr-9753:orange:power";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "esr-9753:orange:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "belkin,f5d8235-v2", "ralink,rt3052-soc";
- model = "Belkin F5D8235 v2";
-
- aliases {
- led-boot = &led_router;
- led-failsafe = &led_router;
- led-running = &led_router;
- led-upgrade = &led_router;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- label = "uboot";
- reg = <0x0 0x50000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x790000>;
- };
-
- partition@7e0000 {
- label = "nvram";
- reg = <0x7e0000 0x10000>;
- };
-
- factory: partition@7f0000 {
- label = "factory";
- reg = <0x7f0000 0x10000>;
- };
- };
- };
-
- rtl8366rb {
- compatible = "realtek,rtl8366rb";
- gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- internet {
- label = "f5d8235-v2:blue:internet";
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- };
-
- internet2 {
- label = "f5d8235-v2:amber:internet";
- gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- };
-
- modem {
- label = "f5d8235-v2:blue:modem";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- modem2 {
- label = "f5d8235-v2:amber:modem";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- led_router: router {
- label = "f5d8235-v2:blue:router";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- storage {
- label = "f5d8235-v2:blue:storage";
- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
-
- storage2 {
- label = "f5d8235-v2:amber:storage";
- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
- };
-
- security {
- label = "f5d8235-v2:blue:security";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
-
- security2 {
- label = "f5d8235-v2:amber:security";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&uboot 0x40004>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
-};
-
-&esw {
- ralink,rgmii = <1>;
- mediatek,portmap = <0x3f>;
- ralink,fct2 = <0x0002500c>;
- /*
- * ext phy base addr 31, rx/tx clock skew 0,
- * turbo mii off, rgmi 3.3v off, port 5 polling off
- * port5: enabled, gige, full-duplex, rx/tx-flow-control
- * port6: enabled, gige, full-duplex, rx/tx-flow-control
- */
- ralink,fpa2 = <0x1f003fff>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&uboot 0x40000>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "belkin,f7c027", "ralink,rt5350-soc";
- model = "Belkin F7C027";
-
- aliases {
- led-boot = &led_status_orange;
- led-failsafe = &led_status_orange;
- led-running = &led_status_orange;
- led-upgrade = &led_status_orange;
- };
-
- leds {
- compatible = "gpio-leds";
-
- status {
- label = "f7c027:blue:status";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- power {
- label = "f7c027:blue:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- led_status_orange: orange {
- label = "f7c027:orange:status";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- relay {
- label = "f7c027:device:relay";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- top {
- label = "restore";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- power {
- label = "power";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- sensor {
- label = "sensor";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x770000>;
- };
-
- partition@7c0000 {
- label = "firmware2";
- reg = <0x7c0000 0x770000>;
- };
-
- partition@f30000 {
- label = "belkin_settings";
- reg = <0xf30000 0xa0000>;
- };
-
- partition@fd0000 {
- label = "unknown";
- reg = <0xfd0000 0x10000>;
- };
-
- partition@fe0000 {
- label = "nvram";
- reg = <0xfe0000 0x10000>;
- };
-
- partition@ff0000 {
- label = "user_factory";
- reg = <0xff0000 0x10000>;
- };
- };
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "fon,fonera-20n", "ralink,rt3052-soc";
- model = "La Fonera 2.0N";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wifi {
- label = "fonera20n:orange:wifi";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "fonera20n:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "fonera20n:orange:usb";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- switch {
- label = "switch";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mediatek,portmap = <0x2f>;
-
- port@0 {
- compatible = "swconfig,port";
- reg = <0>;
- swconfig,segment = "lan";
- swconfig,portmap = <0 4>;
- };
-
- port@1 {
- compatible = "swconfig,port";
- reg = <1>;
- swconfig,segment = "lan";
- swconfig,portmap = <1 3>;
- };
-
- port@2 {
- compatible = "swconfig,port";
- reg = <2>;
- swconfig,segment = "lan";
- swconfig,portmap = <2 2>;
- };
-
- port@3 {
- compatible = "swconfig,port";
- reg = <3>;
- swconfig,segment = "lan";
- swconfig,portmap = <3 1>;
- };
-
- port@4 {
- compatible = "swconfig,port";
- reg = <4>;
- swconfig,segment = "wan";
- swconfig,portmap = <4 0>;
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcwireless,freestation5", "ralink,rt3050-soc";
- model = "ARC FreeStation5";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- gpio-export {
- compatible = "gpio-export";
-
- /*
- * Used to enable power-over-ethernet passthrough from port0 to port1.
- * Disable passthrough by default to prevent accidental equipment damage.
- */
- poe {
- gpio-export,name = "poe-passthrough";
- gpio-export,output = <1>;
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- /*
- * The following leds are defined in the ArcOS firmware, but reportedly
- * not present in the Freestation5 device.
- */
- wifi {
- label = "freestation5:unknown:wifi";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- powerg {
- label = "freestation5:unknown:powerg";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "freestation5:unknown:usb";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x01>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "huawei,hg255d", "ralink,rt3052-soc";
- model = "HuaWei HG255D";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x1000000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- factory: partition@60000 {
- label = "factory";
- reg = <0x60000 0x20000>;
- read-only;
- };
-
- partition@80000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x80000 0xf60000>;
- };
-
- partition@fa0000 {
- label = "factory-orig";
- reg = <0xfa0000 0x20000>;
- read-only;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "hg255d:green:power";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- internet {
- label = "hg255d:green:internet";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "hg255d:green:wlan";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "hg255d:green:usb";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
-
- wps {
- label = "hg255d:green:wps";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- voice {
- label = "hg255d:green:voice";
- gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <10>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "hilink,hlk-rm04", "ralink,rt5350-soc";
- model = "HILINK HLK-RM04";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x1000000>;
- };
-
- chosen {
- bootargs = "console=ttyS1,57600";
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- /* I2C */
- gpio1 {
- /* I2C_I2C_SD */
- gpio-export,name = "hlk-rm04:gpio0";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- };
- gpio2 {
- /* I2C_I2C_SCLK */
- gpio-export,name = "hlk-rm04:gpio1";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- wps {
- label = "wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag";
- ralink,function = "gpio";
- };
-
- uartf_gpio {
- ralink,group = "uartf";
- ralink,function = "gpio uartf";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "hootoo,ht-tm02", "ralink,rt5350-soc";
- model = "HooToo HT-TM02";
-
- aliases {
- led-boot = &led_wlan;
- led-failsafe = &led_wlan;
- led-running = &led_wlan;
- led-upgrade = &led_wlan;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wlan: wlan {
- label = "ht-tm02:blue:wlan";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "ht-tm02:green:lan";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- modeswitch {
- label = "modeswitch";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x10>;
- mediatek,portdisable = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "aztech,hw550-3g", "ralink,rt3052-soc";
- model = "Aztech HW550-3G";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "hw550-3g:green:usb";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
-
- 3g {
- label = "hw550-3g:green:3g";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- led_status: status {
- label = "hw550-3g:green:status";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "hw550-3g:green:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- connect {
- label = "connect";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_CONNECT>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "poray,ip2202", "ralink,rt3052-soc";
- model = "Poray IP2202";
-
- aliases {
- led-boot = &led_run;
- led-failsafe = &led_run;
- led-running = &led_run;
- led-upgrade = &led_run;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_run: run {
- label = "ip2202:green:run";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- net {
- label = "ip2202:amber:net";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "jcg,jhr-n805r", "ralink,rt3050-soc";
- model = "JCG JHR-N805R";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "jhr-n805r:blue:system";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x2e>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "jcg,jhr-n825r", "ralink,rt3052-soc";
- model = "JCG JHR-N825R";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led_system: system {
- label = "jhr-n825r:red:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- reset_wps {
- label = "reset_wps";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x2e>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "jcg,jhr-n926r", "ralink,rt3052-soc";
- model = "JCG JHR-N926R";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wlan1 {
- label = "jhr-n926r:red:wlan";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- };
-
- wlan2 {
- label = "jhr-n926r:yellow:wlan";
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
- };
-
- wlan3 {
- label = "jhr-n926r:green:wlan";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
-
- led_system: system {
- label = "jhr-n926r:blue:system";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- display_data {
- gpio-export,name = "display_data";
- gpio-export,output = <1>;
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- display_clock {
- gpio-export,name = "display_clock";
- gpio-export,output = <1>;
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
-
- display_blank {
- gpio-export,name = "display_blank";
- gpio-export,output = <1>;
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset_wps {
- label = "reset_wps";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wlan {
- label = "wlan";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x2e>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "intenso,memory2move", "ralink,rt5350-soc";
- model = "Intenso Memory 2 Move";
-
- aliases {
- led-boot = &led_wifi;
- led-failsafe = &led_wifi;
- led-running = &led_wifi;
- led-upgrade = &led_wifi;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wifi: wifi {
- label = "m2m:blue:wifi";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "m2m:green:wan";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- power {
- label = "power";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "Bootloader";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "Config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "Factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0x0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "poray,m3", "ralink,rt5350-soc";
- model = "Poray M3";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "m3:blue:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- mode {
- label = "mode";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <1>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "M4.dtsi"
-
-/ {
- compatible = "poray,m4-4m", "poray,m4", "ralink,rt5350-soc";
- model = "Poray M4 (4M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "M4.dtsi"
-
-/ {
- compatible = "poray,m4-8m", "poray,m4", "ralink,rt5350-soc";
- model = "Poray M4 (8M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
+++ /dev/null
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "poray,m4", "ralink,rt5350-soc";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "m4:blue:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <1>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "omnima,miniembplug", "ralink,rt5350-soc";
- model = "Omnima MiniEMBPlug";
-
- leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "miniembplug:red:wlan";
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- };
-
- mobile {
- label = "miniembplug:green:mobile";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- mode-one {
- label = "mode1";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- mode-two {
- label = "mode2";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "omnima,miniembwifi", "ralink,rt3052-soc";
- model = "Omnima MiniEMBWiFi";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "miniembwifi:green:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "miniembwifi:green:wlan";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "mofinetwork,mofi3500-3gn", "ralink,rt3052-soc";
- model = "MoFi Network MOFI3500-3GN";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "mofi3500-3gn:green:usb";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
-
- 3g {
- label = "mofi3500-3gn:green:3g";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- led_status: status {
- label = "mofi3500-3gn:green:status";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "mofi3500-3gn:green:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- connect {
- label = "connect";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_CONNECT>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "hame,mpr-a1", "ralink,rt5350-soc";
- model = "HAME MPR-A1";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "mpr-a1:blue:system";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- };
-
- power {
- label = "mpr-a1:red:power";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb {
- gpio-export,name = "usb";
- gpio-export,output = <1>;
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- root_hub {
- gpio-export,name = "root_hub";
- gpio-export,output = <1>;
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf", "led";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "hame,mpr-a2", "ralink,rt5350-soc";
- model = "HAME MPR-A2";
-
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system: system {
- label = "mpr-a2:blue:system";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- };
-
- power {
- label = "mpr-a2:red:power";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb {
- gpio-export,name = "usb";
- gpio-export,output = <1>;
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- root_hub {
- gpio-export,name = "root_hub";
- gpio-export,output = <1>;
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x1>;
- mediatek,portdisable = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "aximcom,mr-102n", "ralink,rt3052-soc";
- model = "AXIMCom MR-102N";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x790000>;
- };
-
- partition@7e0000 {
- label = "nvram";
- reg = <0x7e0000 0x10000>;
- };
-
- partition@7f0000 {
- label = "nvram_backup";
- reg = <0x7f0000 0x10000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "mr-102n:green:usb";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
-
- led_status: status {
- label = "mr-102n:amber:status";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "mr-102n:green:wlan";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- status = "okay";
- #mediatek,portmap = <0x3e>;
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "planex,mzk-dp150n", "ralink,rt5350-soc";
- model = "Planex MZK-DP150N";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "mzk-dp150n:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&spi1 {
- spidev@0 {
- compatible = "linux,spidev";
- spi-max-frequency = <10000000>;
- reg = <0>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag", "uartf", "led";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x17>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "planex,mzk-w300nh2", "ralink,rt3052-soc";
- model = "Planex MZK-W300NH2";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@3e0000 {
- label = "cimage";
- reg = <0x3e0000 0x20000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x390000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "mzk-w300nh2:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "mzk-w300nh2:amber:wlan";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "mzk-w300nh2:amber:wps";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rt {
- label = "rt";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "planex,mzk-wdpr", "ralink,rt3052-soc";
- model = "Planex MZK-WDPR";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
-
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@7f0000 {
- label = "Data3G";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x680000>;
- };
- };
- };
-
- gpio-export {
- compatible = "gpio-export";
-
- lcd_ctrl1 {
- gpio-export,name = "lcd_ctrl1";
- gpio-export,output = <0>;
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zyxel,nbg-419n", "ralink,rt3052-soc";
- model = "ZyXEL NBG-419N";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "nbg-419n:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "nbg-419n:green:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3352.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zyxel,nbg-419n-v2", "ralink,rt3352-soc";
- model = "ZyXEL NBG-419N v2";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- palmbus@10000000 {
- spi@b00 {
- status = "okay";
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "nbg-419n2:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "nbg-419n2:green:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "nbg-419n2:green:usb";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- rfkill {
- label = "rfkill";
- linux,input-type = <EV_SW>;
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-/ {
- compatible = "wansview,ncs601w", "ralink,rt5350-soc";
- model = "Wansview NCS601W";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "NIXCORE.dtsi"
-
-/ {
- compatible = "nixcore,x1-16m", "nixcore,x1", "ralink,rt5350-soc";
- model = "NixcoreX1 (16M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "NIXCORE.dtsi"
-
-/ {
- compatible = "nixcore,x1-8m", "nixcore,x1", "ralink,rt5350-soc";
- model = "NixcoreX1 (8M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
+++ /dev/null
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "nixcore,x1", "ralink,rt5350-soc";
-
- chosen {
- bootargs = "console=ttyS1,57600";
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- gpio0 {
- gpio-export,name = "gpio0";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
- };
-
- gpio1 {
- gpio-export,name = "gpio1";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
- };
-
- /* GPIOs 1-6 are I2C,SPI */
- /* GPIO 7-14 are uart1 */
- /* GPIOs 15 & 16 are uart2 */
- /* JTAG */
-
- gpio17 {
- /* JTAG_TDO */
- gpio-export,name = "gpio17";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
- };
-
- gpio18 {
- /* JTAG_TDI */
- gpio-export,name = "gpio18";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
- };
-
- gpio19 {
- /* JTAG_TMS */
- gpio-export,name = "gpio19";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
- };
-
- gpio20 {
- /* JTAG_TCLK */
- gpio-export,name = "gpio20";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
- };
-
- gpio21 {
- /* JTAG_TRST_N */
- gpio-export,name = "gpio21";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
- };
-
- /* ETH LEDs */
- /*
- gpio22 {
- gpio-export,name = "gpio22";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
- };
-
- gpio23 {
- gpio-export,name = "gpio23";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
- };
-
- gpio24 {
- gpio-export,name = "gpio24";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- };
-
- gpio25 {
- gpio-export,name = "gpio25";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- };
-
- */
- gpio26 {
- /* ETH4_LED */
- gpio-export,name = "gpio26";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- };
-
- gpio27 {
- /* spi_cs1 */
- gpio-export,name = "gpio27";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-};
-
-&uart {
- status = "okay";
- reset-names = "gpio uartf";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag", "led", "spi_cs1";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x17>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "netcore,nw718", "ralink,rt3050-soc";
- model = "Netcore NW718";
-
- aliases {
- led-boot = &led_cpu;
- led-failsafe = &led_cpu;
- led-running = &led_cpu;
- led-upgrade = &led_cpu;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_cpu: cpu {
- label = "nw718:amber:cpu";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "nw718:amber:usb";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
-
- wps {
- label = "nw718:amber:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x30000 0x20000>;
- read-only;
- };
-
- factory: partition@50000 {
- label = "factory";
- reg = <0x50000 0x10000>;
- read-only;
- };
-
- partition@60000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x60000 0x3a0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "petatel,psr-680w", "ralink,rt3052-soc";
- model = "Petatel PSR-680W Wireless 3G Router";
-
- aliases {
- led-boot = &led_wan;
- led-failsafe = &led_wan;
- led-running = &led_wan;
- led-upgrade = &led_wan;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wan: wan {
- label = "psr-680w:red:wan";
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "prolink,pwh2004", "ralink,rt3052-soc";
- model = "Prolink PWH2004";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wifi {
- label = "pwh2004:red:wifi";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "pwh2004:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "PX-4885.dtsi"
-
-/ {
- compatible = "7links,px-4885-4m", "7links,px-4885", "ralink,rt5350-soc";
- model = "7Links PX-4885 (4M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "devdata";
- reg = <0x20000 0x20000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "PX-4885.dtsi"
-
-/ {
- compatible = "7links,px-4885-8m", "7links,px-4885", "ralink,rt5350-soc";
- model = "7Links PX-4885 (8M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "devdata";
- reg = <0x20000 0x20000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
+++ /dev/null
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "7links,px-4885", "ralink,rt5350-soc";
-
- aliases {
- led-boot = &led_wifi;
- led-failsafe = &led_wifi;
- led-running = &led_wifi;
- led-upgrade = &led_wifi;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wifi: wifi {
- label = "px-4885:orange:wifi";
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- };
-
- storage {
- label = "px-4885:blue:storage";
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x3f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "asus,rt-g32-b1", "ralink,rt3050-soc";
- model = "Asus RT-G32 B1";
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "devdata";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- devconf: partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&devconf 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&devconf 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "asus,rt-n10-plus", "ralink,rt3050-soc";
- model = "Asus RT-N10+";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- led-running = &led_wps;
- led-upgrade = &led_wps;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "devdata";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- devconf: partition@40000 {
- label = "devconf";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wps: wps {
- label = "rt-n10-plus:green:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&devconf 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&devconf 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "asus,rt-n13u", "ralink,rt3052-soc";
- model = "Asus RT-N13U";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "rt-n13u:blue:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- wifi {
- label = "rt-n13u:blue:wifi";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <10>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "RT5350F-OLINUXINO.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "olimex,rt5350f-olinuxino-evb", "ralink,rt5350-soc";
- model = "Olimex RT5350F-OLinuXino-EVB";
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- relay1 {
- gpio-export,name = "relay1";
- gpio-export,output = <0>;
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- };
-
- relay2 {
- gpio-export,name = "relay2";
- gpio-export,output = <0>;
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
-
- button {
- gpio-export,name = "button";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "RT5350F-OLINUXINO.dtsi"
-
-/ {
- compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";
- model = "Olimex RT5350F-OLinuXino";
-};
+++ /dev/null
-#include "rt5350.dtsi"
-
-/ {
- compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";
-
- aliases {
- serial0 = &uartlite;
- serial1 = &uart;
- };
-};
-
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag";
- ralink,function = "gpio";
- };
- uartf_gpio {
- ralink,group = "uartf";
- ralink,function = "gpio uartf";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <0x17>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "teltonika,rut5xx", "ralink,rt3050-soc";
- model = "Teltonika RUT5XX";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "rut5xx:green:status";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "skyline,sl-r7205", "ralink,rt3052-soc";
- model = "Skyline SL-R7205 Wireless 3G Router";
-
- aliases {
- led-boot = &led_wifi;
- led-failsafe = &led_wifi;
- led-running = &led_wifi;
- led-upgrade = &led_wifi;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_wifi: wifi {
- label = "sl-r7205:green:wifi";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "trendnet,tew-638apb-v2", "ralink,rt3050-soc";
- model = "TRENDnet TEW-638APB v2";
-
- aliases {
- led-boot = &led_wps_green;
- led-failsafe = &led_wps_green;
- led-running = &led_wps_green;
- led-upgrade = &led_wps_green;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x400000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wps {
- label = "tew-638apb-v2:orange:wps";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- led_wps_green: wps2 {
- label = "tew-638apb-v2:green:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "trendnet,tew-714tru", "ralink,rt5350-soc";
- model = "TRENDnet TEW714TRU";
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "tew-714tru:red:usb";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ohci_port1>, <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- wifi {
- label = "tew-714tru:green:wifi";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- repeater {
- gpio-export,name = "repeater_switch";
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- wisp {
- gpio-export,name = "wisp_switch";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x1>;
- mediatek,portdisable = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "upvel,ur-326n4g", "ralink,rt3052-soc";
- model = "UPVEL UR-326N4G";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- led-running = &led_wps;
- led-upgrade = &led_wps;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- 3g {
- label = "ur-326n4g:green:3g";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- gateway {
- label = "ur-326n4g:green:gateway";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- ap {
- label = "ur-326n4g:green:ap";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- led_wps: wps {
- label = "ur-326n4g:green:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- station {
- label = "ur-326n4g:green:station";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset_wps {
- label = "reset_wps";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- mode {
- label = "mode";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4004>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "upvel,ur-336un", "ralink,rt3052-soc";
- model = "UPVEL UR-336UN";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- led-running = &led_wps;
- led-upgrade = &led_wps;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- 3g {
- label = "ur-336un:green:3g";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- gateway {
- label = "ur-336un:green:gateway";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- ap {
- label = "ur-336un:green:ap";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- led_wps: wps {
- label = "ur-336un:green:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- station {
- label = "ur-336un:green:station";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset_wps {
- label = "reset_wps";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- mode {
- label = "mode";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4004>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "ralink,v22rw-2x2", "ralink,rt3052-soc";
- model = "Ralink AP-RT3052-V22RW-2X2";
-
- aliases {
- led-boot = &led_security;
- led-failsafe = &led_security;
- led-running = &led_security;
- led-upgrade = &led_security;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_security: security {
- label = "v22rw-2x2:green:security";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "v22rw-2x2:red:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "VOCORE.dtsi"
-
-/ {
- compatible = "vocore,vocore-16m", "vocore,vocore", "ralink,rt5350-soc";
- model = "VoCore (16M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "VOCORE.dtsi"
-
-/ {
- compatible = "vocore,vocore-8m", "vocore,vocore", "ralink,rt5350-soc";
- model = "VoCore (8M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
+++ /dev/null
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "vocore,vocore", "ralink,rt5350-soc";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- gpio0 {
- gpio-export,name = "gpio0";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
- };
-
- /* UARTF */
- gpio7 {
- /* UARTF_RTS_N */
- gpio-export,name = "gpio7";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- };
-
- gpio8 {
- /* UARTF_TXD */
- gpio-export,name = "gpio8";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
-
- gpio9 {
- /* UARTF_CTS_N */
- gpio-export,name = "gpio9";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- };
-
- gpio12 {
- /* UARTF_DCD_N */
- gpio-export,name = "gpio12";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
-
- gpio13 {
- /* UARTF_DSR_N */
- gpio-export,name = "gpio13";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
-
- gpio14 {
- /* UARTF_RIN */
- gpio-export,name = "gpio14";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- };
-
- /* JTAG */
- gpio17 {
- /* JTAG_TDO */
- gpio-export,name = "gpio17";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
- };
-
- gpio18 {
- /* JTAG_TDI */
- gpio-export,name = "gpio18";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
- };
-
- gpio19 {
- /* JTAG_TMS */
- gpio-export,name = "gpio19";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
- };
-
- gpio20 {
- /* JTAG_TCLK */
- gpio-export,name = "gpio20";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
- };
-
- gpio21 {
- /* JTAG_TRST_N */
- gpio-export,name = "gpio21";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
- };
-
- /* ETH LEDs */
- gpio22 {
- /* ETH0_LED */
- gpio-export,name = "gpio22";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
- };
-
- gpio23 {
- /* ETH1_LED */
- gpio-export,name = "gpio23";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
- };
-
- gpio24 {
- /* ETH2_LED */
- gpio-export,name = "gpio24";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- };
-
- gpio25 {
- /* ETH3_LED */
- gpio-export,name = "gpio25";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- };
-
- gpio26 {
- /* ETH4_LED */
- gpio-export,name = "gpio26";
- gpio-export,direction_may_change = <1>;
- gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- /* UARTF_RXD */
- label = "vocore:green:status";
- gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
- };
-
- eth {
- /* UARTF_DTR_N */
- label = "vocore:orange:eth";
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag", "uartf", "led";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x11>;
- mediatek,portdisable = <0x2e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&spi1 {
- status = "okay";
-
- spidev@0 {
- compatible = "linux,spidev";
- spi-max-frequency = <10000000>;
- reg = <0>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tenda,w150m", "ralink,rt3050-soc";
- model = "Tenda W150M";
-
- aliases {
- led-boot = &led_ap;
- led-failsafe = &led_ap;
- led-running = &led_ap;
- led-upgrade = &led_ap;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3c8000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- 3grouter {
- label = "w150m:blue:3grouter";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- led_ap: ap {
- label = "w150m:blue:ap";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- wisprouter {
- label = "w150m:blue:wisprouter";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wirelessrouter {
- label = "w150m:blue:wirelessrouter";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
-
- 3g {
- label = "w150m:blue:3g";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- wpsreset {
- label = "w150m:blue:wpsreset";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- mode {
- label = "mode";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "tenda,w306r-v2", "ralink,rt3052-soc";
- model = "Tenda W306R V2.0";
-
- aliases {
- led-boot = &led_sys;
- led-failsafe = &led_sys;
- led-running = &led_sys;
- led-upgrade = &led_sys;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_sys: sys {
- label = "w306r-v20:green:sys";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "w306r-v20:green:wps";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "RESET/WPS";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "alfa-network,w502u", "ralink,rt3052-soc";
- model = "ALFA Network W502U";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- led-running = &led_wps;
- led-upgrade = &led_wps;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "w502u:blue:usb";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
-
- led_wps: wps {
- label = "w502u:blue:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "sparklan,wcr-150gn", "ralink,rt3050-soc";
- model = "Sparklan WCR-150GN";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- user {
- label = "wcr-150gn:amber:user";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
-
- led_power: power {
- label = "wcr-150gn:amber:power";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- wps {
- label = "wps";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "buffalo,whr-g300n", "ralink,rt3052-soc";
- model = "Buffalo WHR-G300N";
-
- aliases {
- led-boot = &led_diag;
- led-failsafe = &led_diag;
- led-upgrade = &led_diag;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3a0000>;
- };
-
- partition@3f0000 {
- label = "user";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_diag: diag {
- label = "whr-g300n:red:diag";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- router {
- label = "whr-g300n:green:router";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- security {
- label = "whr-g300n:amber:security";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- aoss {
- label = "aoss";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- router-off {
- label = "router-off";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_2>;
- };
-
- router-on {
- label = "router-on";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_3>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-/ {
- compatible = "easyacc,wizard-8800", "ralink,rt5350-soc";
- model = "EASYACC WI-STOR WIZARD 8800";
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
- model = "WIZnet WizFi630A";
-
- aliases {
- led-boot = &led_run;
- led-failsafe = &led_run;
- led-running = &led_run;
- led-upgrade = &led_run;
- };
-
- chosen {
- bootargs = "console=ttyS1,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_run: run {
- label = "wizfi630a::run";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "wizfi630a::wps";
- gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- };
-
- uart1 {
- label = "wizfi630a::uart1";
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- };
-
- uart2 {
- label = "wizfi630a::uart2";
- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- scm1 {
- label = "SCM1";
- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- scm2 {
- label = "SCM2";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
- };
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- #size-cells = <1>;
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- #size-cells = <1>;
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- #size-cells = <1>;
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- #size-cells = <1>;
- label = "firmware";
- reg = <0x50000 0xfb0000>;
- };
- };
- };
-};
-
-&uart {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uartf_pins>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag" ;
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x17>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "asus,wl-330n", "ralink,rt3050-soc";
- model = "Asus WL-330N";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- link {
- label = "wl-330n:blue:link";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "wl-330n:blue:power";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "asus,wl-330n3g", "ralink,rt3050-soc";
- model = "Asus WL-330N3G";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- 3g {
- label = "wl-330n3g:blue:3g";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- 3g2 {
- label = "wl-330n3g:red:3g";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "wl-330n3g:blue:power";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "sitecom,wl-351", "ralink,rt3052-soc";
- model = "Sitecom WL-351 v1 002";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "wl-351:amber:power";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- unpopulated {
- label = "wl-351:amber:unpopulated";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- unpopulated2 {
- label = "wl-351:blue:unpopulated";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- rtl8366rb {
- compatible = "realtek,rtl8366rb";
- gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
-};
-
-&esw {
- ralink,rgmii = <1>;
- mediatek,portmap = <0x3f>;
- ralink,fct2 = <0x0002500c>;
- /*
- * ext phy base addr 31, rx/tx clock skew 0,
- * turbo mii off, rgmi 3.3v off, port 5 polling off
- * port5: enabled, gige, full-duplex, rx/tx-flow-control
- * port6: enabled, gige, full-duplex, rx/tx-flow-control
- */
- ralink,fpa2 = <0x1f003fff>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "netgear,wnce2001", "ralink,rt3052-soc";
- model = "Netgear WNCE2001";
-
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_green;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_green: power-green {
- label = "wnce2001:green:power";
- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
- };
-
- power-red {
- label = "wnce2001:red:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- wlan-green {
- label = "wnce2001:green:wlan";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
-
- wlan-red {
- label = "wnce2001:red:wlan";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- rt {
- label = "rt";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- ap {
- label = "ap";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- factory: partition@30000 {
- label = "factory";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "config";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "language";
- reg = <0x60000 0x30000>;
- read-only;
- };
-
- partition@90000 {
- label = "pot";
- reg = <0x90000 0x10000>;
- read-only;
- };
-
- partition@a0000 {
- label = "checksum";
- reg = <0xa0000 0x10000>;
- };
-
- partition@b0000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0xb0000 0x350000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "WR512-3GN.dtsi"
-
-/ {
- compatible = "unbranded,wr512-3gn-4m", "unbranded,wr512-3gn", "ralink,rt3052-soc";
- model = "WR512-3GN (4M)";
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3c8000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "WR512-3GN.dtsi"
-
-/ {
- compatible = "unbranded,wr512-3gn-8m", "unbranded,wr512-3gn", "ralink,rt3052-soc";
- model = "WR512-3GN (8M)";
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
+++ /dev/null
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "unbranded,wr512-3gn", "ralink,rt3052-soc";
-
- aliases {
- led-boot = &led_wps;
- led-failsafe = &led_wps;
- led-running = &led_wps;
- led-upgrade = &led_wps;
- };
-
- leds {
- compatible = "gpio-leds";
-
- 3g {
- label = "wr512-3gn:green:3g";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- gateway {
- label = "wr512-3gn:green:gateway";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- ap {
- label = "wr512-3gn:green:ap";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- led_wps: wps {
- label = "wr512-3gn:green:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- station {
- label = "wr512-3gn:green:station";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset_wps {
- label = "reset_wps";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- mode {
- label = "mode";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "accton,wr6202", "ralink,rt3052-soc";
- model = "Accton WR6202";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- wps {
- label = "wr6202:blue:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- 3g {
- label = "wr6202:blue:3g";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb {
- gpio-export,name = "usb";
- gpio-export,output = <0>;
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "WT1520.dtsi"
-
-/ {
- compatible = "nexx,wt1520-4m", "nexx,wt1520", "ralink,rt5350-soc";
- model = "Nexx WT1520 (4M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "WT1520.dtsi"
-
-/ {
- compatible = "nexx,wt1520-8m", "nexx,wt1520", "ralink,rt5350-soc";
- model = "Nexx WT1520 (8M)";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
+++ /dev/null
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "nexx,wt1520", "ralink,rt5350-soc";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "poray,x5", "ralink,rt5350-soc";
- model = "Poray X5";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "x5:green:power";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
-
- 20 {
- label = "x5:green:20";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
-
- 50 {
- label = "x5:green:50";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- 80 {
- label = "x5:green:80";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- bat {
- label = "bat";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- mode {
- label = "mode";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb-mode {
- gpio-export,name = "usb-mode";
- gpio-export,output = <0>;
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <1>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "poray,x8", "ralink,rt5350-soc";
- model = "Poray X8";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "x8:green:power";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <1>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- ralink,led-polarity = <1>;
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "unbranded,xdx-rn502j", "ralink,rt3052-soc";
- model = "XDX RN502J";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wifi {
- label = "xdxrn502j:green:wifi";
- gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- };
-
- led_power: power {
- label = "xdxrn502j:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x3e>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zorlik,zl5900v2", "ralink,rt5350-soc";
- model = "Zorlik ZL5900V2";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "zl5900v2:green:lan";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- };
-
- led_power: power {
- label = "zl5900v2:blue:power";
- gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
- mediatek,portmap = <0>;
- mediatek,portdisable = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zyxel,keenetic", "ralink,rt3052-soc";
- model = "ZyXEL Keenetic";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
- bank-width = <2>;
- device-width = <2>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "kn:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "kn:green:usb";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- trigger-sources = <&otg_port1>;
- linux,default-trigger = "usbport";
- };
-
- wps {
- label = "kn:green:wps";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
- mediatek,portmap = <0x2f>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
-
-&otg {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zyxel,keenetic-start", "ralink,rt5350-soc";
- model = "ZyXEL Keenetic Start";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: power {
- label = "zyxel:green:power";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
-
- internet {
- label = "zyxel:green:internet";
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-
-&esw {
- mediatek,portmap = <0x2f>;
- mediatek,led_polarity = <0x17>;
-};
-
-&wmac {
- status = "okay";
- ralink,led-polarity = <1>;
- ralink,mtd-eeprom = <&factory 0>;
-};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "8devices,carambola", "ralink,rt3050-soc";
+ model = "8devices Carambola";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ i2c-gpio {
+ compatible = "i2c-gpio";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <10>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050_allnet_all0256n.dtsi"
+
+/ {
+ compatible = "allnet,all0256n-4m", "allnet,all0256n", "ralink,rt3050-soc";
+ model = "Allnet ALL0256N (4M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3c8000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050_allnet_all0256n.dtsi"
+
+/ {
+ compatible = "allnet,all0256n-8m", "allnet,all0256n", "ralink,rt3050-soc";
+ model = "Allnet ALL0256N (8M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "allnet,all0256n", "ralink,rt3050-soc";
+
+ leds {
+ compatible = "gpio-leds";
+
+ rssilow {
+ label = "all0256n:green:rssilow";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ rssimed {
+ label = "all0256n:green:rssimed";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ rssihigh {
+ label = "all0256n:green:rssihigh";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050_alphanetworks_asl26555.dtsi"
+
+/ {
+ compatible = "alphanetworks,asl26555-16m", "alphanetworks,asl26555", "ralink,rt3050-soc";
+ model = "Alpha ASL26555 (16M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xf80000>;
+ };
+
+ partition@fd0000 {
+ label = "cert";
+ reg = <0xfd0000 0x10000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "langpack";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ devdata: partition@ff0000 {
+ label = "devdata";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050_alphanetworks_asl26555.dtsi"
+
+/ {
+ compatible = "alphanetworks,asl26555-8m", "alphanetworks,asl26555", "ralink,rt3050-soc";
+ model = "Alpha ASL26555 (8M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ devdata: partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "rgdb";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x790000>;
+ };
+
+ partition@7e0000 {
+ label = "cert";
+ reg = <0x7e0000 0x10000>;
+ read-only;
+ };
+
+ partition@7f0000 {
+ label = "langpack";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
--- /dev/null
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "alphanetworks,asl26555", "ralink,rt3050-soc";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ eth {
+ label = "asl26555:green:eth";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wan-red {
+ label = "asl26555:red:wan";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan-green {
+ label = "asl26555:green:wan";
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "asl26555:green:wlan";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power_green: power-green {
+ label = "asl26555:green:power";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ power-red {
+ label = "asl26555:red:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ 3g-green {
+ label = "asl26555:green:3g";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ 3g-red {
+ label = "asl26555:red:3g";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&devdata 0x4004>;
+};
+
+&esw {
+ mediatek,portmap = <0x1e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devdata 0x4000>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcwireless,freestation5", "ralink,rt3050-soc";
+ model = "ARC FreeStation5";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ /*
+ * Used to enable power-over-ethernet passthrough from port0 to port1.
+ * Disable passthrough by default to prevent accidental equipment damage.
+ */
+ poe {
+ gpio-export,name = "poe-passthrough";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /*
+ * The following leds are defined in the ArcOS firmware, but reportedly
+ * not present in the Freestation5 device.
+ */
+ wifi {
+ label = "freestation5:unknown:wifi";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ powerg {
+ label = "freestation5:unknown:powerg";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "freestation5:unknown:usb";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x01>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asus,rt-g32-b1", "ralink,rt3050-soc";
+ model = "Asus RT-G32 B1";
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "devdata";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ devconf: partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&devconf 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devconf 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asus,rt-n10-plus", "ralink,rt3050-soc";
+ model = "Asus RT-N10+";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "devdata";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ devconf: partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wps: wps {
+ label = "rt-n10-plus:green:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&devconf 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devconf 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asus,wl-330n", "ralink,rt3050-soc";
+ model = "Asus WL-330N";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ link {
+ label = "wl-330n:blue:link";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "wl-330n:blue:power";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asus,wl-330n3g", "ralink,rt3050-soc";
+ model = "Asus WL-330N3G";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 3g {
+ label = "wl-330n3g:blue:3g";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ 3g2 {
+ label = "wl-330n3g:red:3g";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "wl-330n3g:blue:power";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dcs-930", "ralink,rt3050-soc";
+ model = "D-Link DCS-930";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x400000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "dcs-930:red:alert";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status: status {
+ label = "dcs-930:green:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "dcs-930:blue:wps";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dir-300-b1", "ralink,rt3050-soc";
+ model = "D-Link DIR-300 B1";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_green;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_green;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ devdata: partition@30000 {
+ label = "devdata";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "dir-300-b1:amber:status";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_green: status2 {
+ label = "dir-300-b1:green:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "dir-300-b1:amber:wan";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wan2 {
+ label = "dir-300-b1:green:wan";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "dir-300-b1:blue:wps";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&devdata 0x4004>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devdata 0x4000>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dir-600-b1", "ralink,rt3050-soc";
+ model = "D-Link DIR-600 B1";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_green;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_green;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ devdata: partition@30000 {
+ label = "devdata";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "dir-600-b1:amber:status";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_green: status2 {
+ label = "dir-600-b1:green:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "dir-600-b1:amber:wan";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wan2 {
+ label = "dir-600-b1:green:wan";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "dir-600-b1:blue:wps";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&devdata 0x4004>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devdata 0x4000>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dir-615-d", "ralink,rt3050-soc";
+ model = "D-Link DIR-615 D";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_green;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_green;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ devdata: partition@30000 {
+ label = "devdata";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "dir-615-d:amber:status";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_green: status2 {
+ label = "dir-615-d:green:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wan {
+ label = "dir-615-d:amber:wan";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wan2 {
+ label = "dir-615-d:green:wan";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "dir-615-d:blue:wps";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devdata 0x4000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dir-620-a1", "ralink,rt3050-soc";
+ model = "D-Link DIR-620 A1";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_green;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_green;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "dir-620-a1:amber:status";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_green: status2 {
+ label = "dir-620-a1:green:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "dir-620-a1:amber:wan";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wan2 {
+ label = "dir-620-a1:green:wan";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "dir-620-a1:blue:wps";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps2 {
+ label = "dir-620-a1:amber:wps";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "edimax,3g-6200n", "ralink,rt3050-soc";
+ model = "Edimax 3g-6200n";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@3e0000 {
+ label = "cimage";
+ reg = <0x3e0000 0x20000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "edimax,uimage";
+ label = "firmware";
+ reg = <0x50000 0x390000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "3g-6200n:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "3g-6200n:amber:wlan";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ 3g {
+ label = "3g-6200n:blue:3g";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "wlanswitch";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "edimax,3g-6200nl", "ralink,rt3050-soc";
+ model = "Edimax 3g-6200nl";
+
+ aliases {
+ led-boot = &led_internet;
+ led-failsafe = &led_internet;
+ led-running = &led_internet;
+ led-upgrade = &led_internet;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@3e0000 {
+ label = "cimage";
+ reg = <0x3e0000 0x20000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "edimax,uimage";
+ label = "firmware";
+ reg = <0x50000 0x390000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_internet: internet {
+ label = "3g-6200nl:green:internet";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "3g-6200nl:green:wlan";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portdisable = <0x37>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "huawei,d105", "ralink,rt3050-soc";
+ model = "Huawei D105";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "d105:red:power";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "d105:green:usb";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "jcg,jhr-n805r", "ralink,rt3050-soc";
+ model = "JCG JHR-N805R";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "jhr-n805r:blue:system";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x2e>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "netcore,nw718", "ralink,rt3050-soc";
+ model = "Netcore NW718";
+
+ aliases {
+ led-boot = &led_cpu;
+ led-failsafe = &led_cpu;
+ led-running = &led_cpu;
+ led-upgrade = &led_cpu;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_cpu: cpu {
+ label = "nw718:amber:cpu";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "nw718:amber:usb";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wps {
+ label = "nw718:amber:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x20000>;
+ read-only;
+ };
+
+ factory: partition@50000 {
+ label = "factory";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x60000 0x3a0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "sparklan,wcr-150gn", "ralink,rt3050-soc";
+ model = "Sparklan WCR-150GN";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user {
+ label = "wcr-150gn:amber:user";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_power: power {
+ label = "wcr-150gn:amber:power";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "teltonika,rut5xx", "ralink,rt3050-soc";
+ model = "Teltonika RUT5XX";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "rut5xx:green:status";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tenda,w150m", "ralink,rt3050-soc";
+ model = "Tenda W150M";
+
+ aliases {
+ led-boot = &led_ap;
+ led-failsafe = &led_ap;
+ led-running = &led_ap;
+ led-upgrade = &led_ap;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3c8000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 3grouter {
+ label = "w150m:blue:3grouter";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_ap: ap {
+ label = "w150m:blue:ap";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wisprouter {
+ label = "w150m:blue:wisprouter";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wirelessrouter {
+ label = "w150m:blue:wirelessrouter";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ 3g {
+ label = "w150m:blue:3g";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wpsreset {
+ label = "w150m:blue:wpsreset";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ mode {
+ label = "mode";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "trendnet,tew-638apb-v2", "ralink,rt3050-soc";
+ model = "TRENDnet TEW-638APB v2";
+
+ aliases {
+ led-boot = &led_wps_green;
+ led-failsafe = &led_wps_green;
+ led-running = &led_wps_green;
+ led-upgrade = &led_wps_green;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x400000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "tew-638apb-v2:orange:wps";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wps_green: wps2 {
+ label = "tew-638apb-v2:green:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "accton,wr6202", "ralink,rt3052-soc";
+ model = "Accton WR6202";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "wr6202:blue:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ 3g {
+ label = "wr6202:blue:3g";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "alfa-network,w502u", "ralink,rt3052-soc";
+ model = "ALFA Network W502U";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "w502u:blue:usb";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_wps: wps {
+ label = "w502u:blue:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "argus,atp-52b", "ralink,rt3052-soc";
+ model = "Argus ATP-52B";
+
+ aliases {
+ led-boot = &led_run;
+ led-failsafe = &led_run;
+ led-running = &led_run;
+ led-upgrade = &led_run;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7a0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_run: run {
+ label = "atp-52b:green:run";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ net {
+ label = "atp-52b:amber:net";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asiarf,awapn2403", "ralink,rt3052-soc";
+ model = "AsiaRF AWAPN2403";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wps: wps {
+ label = "awapn2403:green:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asus,rt-n13u", "ralink,rt3052-soc";
+ model = "Asus RT-N13U";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "rt-n13u:blue:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "rt-n13u:blue:wifi";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <10>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "aximcom,mr-102n", "ralink,rt3052-soc";
+ model = "AXIMCom MR-102N";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x790000>;
+ };
+
+ partition@7e0000 {
+ label = "nvram";
+ reg = <0x7e0000 0x10000>;
+ };
+
+ partition@7f0000 {
+ label = "nvram_backup";
+ reg = <0x7f0000 0x10000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "mr-102n:green:usb";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ led_status: status {
+ label = "mr-102n:amber:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "mr-102n:green:wlan";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ status = "okay";
+ #mediatek,portmap = <0x3e>;
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "aztech,hw550-3g", "ralink,rt3052-soc";
+ model = "Aztech HW550-3G";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "hw550-3g:green:usb";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ 3g {
+ label = "hw550-3g:green:3g";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status: status {
+ label = "hw550-3g:green:status";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "hw550-3g:green:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ connect {
+ label = "connect";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CONNECT>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "belkin,f5d8235-v2", "ralink,rt3052-soc";
+ model = "Belkin F5D8235 v2";
+
+ aliases {
+ led-boot = &led_router;
+ led-failsafe = &led_router;
+ led-running = &led_router;
+ led-upgrade = &led_router;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "uboot";
+ reg = <0x0 0x50000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x790000>;
+ };
+
+ partition@7e0000 {
+ label = "nvram";
+ reg = <0x7e0000 0x10000>;
+ };
+
+ factory: partition@7f0000 {
+ label = "factory";
+ reg = <0x7f0000 0x10000>;
+ };
+ };
+ };
+
+ rtl8366rb {
+ compatible = "realtek,rtl8366rb";
+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ internet {
+ label = "f5d8235-v2:blue:internet";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ };
+
+ internet2 {
+ label = "f5d8235-v2:amber:internet";
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ };
+
+ modem {
+ label = "f5d8235-v2:blue:modem";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ modem2 {
+ label = "f5d8235-v2:amber:modem";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_router: router {
+ label = "f5d8235-v2:blue:router";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ storage {
+ label = "f5d8235-v2:blue:storage";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ storage2 {
+ label = "f5d8235-v2:amber:storage";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+
+ security {
+ label = "f5d8235-v2:blue:security";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ security2 {
+ label = "f5d8235-v2:amber:security";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&uboot 0x40004>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+};
+
+&esw {
+ ralink,rgmii = <1>;
+ mediatek,portmap = <0x3f>;
+ ralink,fct2 = <0x0002500c>;
+ /*
+ * ext phy base addr 31, rx/tx clock skew 0,
+ * turbo mii off, rgmi 3.3v off, port 5 polling off
+ * port5: enabled, gige, full-duplex, rx/tx-flow-control
+ * port6: enabled, gige, full-duplex, rx/tx-flow-control
+ */
+ ralink,fpa2 = <0x1f003fff>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&uboot 0x40000>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "buffalo,whr-g300n", "ralink,rt3052-soc";
+ model = "Buffalo WHR-G300N";
+
+ aliases {
+ led-boot = &led_diag;
+ led-failsafe = &led_diag;
+ led-upgrade = &led_diag;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3a0000>;
+ };
+
+ partition@3f0000 {
+ label = "user";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_diag: diag {
+ label = "whr-g300n:red:diag";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ router {
+ label = "whr-g300n:green:router";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ security {
+ label = "whr-g300n:amber:security";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ aoss {
+ label = "aoss";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ router-off {
+ label = "router-off";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_2>;
+ };
+
+ router-on {
+ label = "router-on";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_3>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dap-1350", "ralink,rt3052-soc";
+ model = "D-Link DAP-1350";
+
+ aliases {
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_blue;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_blue;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ devdata: partition@30000 {
+ label = "devdata";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x30000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "devlang";
+ reg = <0x70000 0x40000>;
+ read-only;
+ };
+
+ partition@b0000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0xb0000 0x750000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_blue: power {
+ label = "dap-1350:blue:power";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ power2 {
+ label = "dap-1350:red:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "dap-1350:blue:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ rt {
+ label = "rt";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ ap {
+ label = "ap";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&devdata 0x2e>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&devdata 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "engenius,esr-9753", "ralink,rt3052-soc";
+ model = "Senao / EnGenius ESR-9753";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "esr-9753:orange:power";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "esr-9753:orange:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "fon,fonera-20n", "ralink,rt3052-soc";
+ model = "La Fonera 2.0N";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "fonera20n:orange:wifi";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "fonera20n:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "fonera20n:orange:usb";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ switch {
+ label = "switch";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mediatek,portmap = <0x2f>;
+
+ port@0 {
+ compatible = "swconfig,port";
+ reg = <0>;
+ swconfig,segment = "lan";
+ swconfig,portmap = <0 4>;
+ };
+
+ port@1 {
+ compatible = "swconfig,port";
+ reg = <1>;
+ swconfig,segment = "lan";
+ swconfig,portmap = <1 3>;
+ };
+
+ port@2 {
+ compatible = "swconfig,port";
+ reg = <2>;
+ swconfig,segment = "lan";
+ swconfig,portmap = <2 2>;
+ };
+
+ port@3 {
+ compatible = "swconfig,port";
+ reg = <3>;
+ swconfig,segment = "lan";
+ swconfig,portmap = <3 1>;
+ };
+
+ port@4 {
+ compatible = "swconfig,port";
+ reg = <4>;
+ swconfig,segment = "wan";
+ swconfig,portmap = <4 0>;
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "hauppauge,broadway", "ralink,rt3052-soc";
+ model = "Hauppauge Broadway";
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x790000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ diskmounted {
+ label = "broadway:red:diskmounted";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wps_active {
+ label = "broadway:red:wps_active";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ factory {
+ label = "Factory Reset button";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "huawei,hg255d", "ralink,rt3052-soc";
+ model = "HuaWei HG255D";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x1000000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ factory: partition@60000 {
+ label = "factory";
+ reg = <0x60000 0x20000>;
+ read-only;
+ };
+
+ partition@80000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x80000 0xf60000>;
+ };
+
+ partition@fa0000 {
+ label = "factory-orig";
+ reg = <0xfa0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "hg255d:green:power";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "hg255d:green:internet";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "hg255d:green:wlan";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "hg255d:green:usb";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wps {
+ label = "hg255d:green:wps";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ voice {
+ label = "hg255d:green:voice";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <10>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "jcg,jhr-n825r", "ralink,rt3052-soc";
+ model = "JCG JHR-N825R";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led_system: system {
+ label = "jhr-n825r:red:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ reset_wps {
+ label = "reset_wps";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x2e>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "jcg,jhr-n926r", "ralink,rt3052-soc";
+ model = "JCG JHR-N926R";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan1 {
+ label = "jhr-n926r:red:wlan";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2 {
+ label = "jhr-n926r:yellow:wlan";
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan3 {
+ label = "jhr-n926r:green:wlan";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
+ led_system: system {
+ label = "jhr-n926r:blue:system";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ display_data {
+ gpio-export,name = "display_data";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ display_clock {
+ gpio-export,name = "display_clock";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ display_blank {
+ gpio-export,name = "display_blank";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset_wps {
+ label = "reset_wps";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wlan {
+ label = "wlan";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x2e>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "mofinetwork,mofi3500-3gn", "ralink,rt3052-soc";
+ model = "MoFi Network MOFI3500-3GN";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "mofi3500-3gn:green:usb";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ 3g {
+ label = "mofi3500-3gn:green:3g";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status: status {
+ label = "mofi3500-3gn:green:status";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "mofi3500-3gn:green:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ connect {
+ label = "connect";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CONNECT>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "netgear,wnce2001", "ralink,rt3052-soc";
+ model = "Netgear WNCE2001";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power-green {
+ label = "wnce2001:green:power";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ power-red {
+ label = "wnce2001:red:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan-green {
+ label = "wnce2001:green:wlan";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan-red {
+ label = "wnce2001:red:wlan";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ rt {
+ label = "rt";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ ap {
+ label = "ap";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "config";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "language";
+ reg = <0x60000 0x30000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "pot";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "checksum";
+ reg = <0xa0000 0x10000>;
+ };
+
+ partition@b0000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0xb0000 0x350000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "nexaira,bc2", "ralink,rt3052-soc";
+ model = "NexAira BC2";
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "bc2:blue:usb";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "omnima,miniembwifi", "ralink,rt3052-soc";
+ model = "Omnima MiniEMBWiFi";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "miniembwifi:green:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "miniembwifi:green:wlan";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "petatel,psr-680w", "ralink,rt3052-soc";
+ model = "Petatel PSR-680W Wireless 3G Router";
+
+ aliases {
+ led-boot = &led_wan;
+ led-failsafe = &led_wan;
+ led-running = &led_wan;
+ led-upgrade = &led_wan;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wan: wan {
+ label = "psr-680w:red:wan";
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "planex,mzk-w300nh2", "ralink,rt3052-soc";
+ model = "Planex MZK-W300NH2";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@3e0000 {
+ label = "cimage";
+ reg = <0x3e0000 0x20000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x390000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "mzk-w300nh2:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "mzk-w300nh2:amber:wlan";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "mzk-w300nh2:amber:wps";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rt {
+ label = "rt";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "planex,mzk-wdpr", "ralink,rt3052-soc";
+ model = "Planex MZK-WDPR";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@7f0000 {
+ label = "Data3G";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x680000>;
+ };
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ lcd_ctrl1 {
+ gpio-export,name = "lcd_ctrl1";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "poray,ip2202", "ralink,rt3052-soc";
+ model = "Poray IP2202";
+
+ aliases {
+ led-boot = &led_run;
+ led-failsafe = &led_run;
+ led-running = &led_run;
+ led-upgrade = &led_run;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_run: run {
+ label = "ip2202:green:run";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ net {
+ label = "ip2202:amber:net";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "prolink,pwh2004", "ralink,rt3052-soc";
+ model = "Prolink PWH2004";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "pwh2004:red:wifi";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "pwh2004:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ralink,v22rw-2x2", "ralink,rt3052-soc";
+ model = "Ralink AP-RT3052-V22RW-2X2";
+
+ aliases {
+ led-boot = &led_security;
+ led-failsafe = &led_security;
+ led-running = &led_security;
+ led-upgrade = &led_security;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_security: security {
+ label = "v22rw-2x2:green:security";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "v22rw-2x2:red:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "sitecom,wl-351", "ralink,rt3052-soc";
+ model = "Sitecom WL-351 v1 002";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "wl-351:amber:power";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ unpopulated {
+ label = "wl-351:amber:unpopulated";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ unpopulated2 {
+ label = "wl-351:blue:unpopulated";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ rtl8366rb {
+ compatible = "realtek,rtl8366rb";
+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+};
+
+&esw {
+ ralink,rgmii = <1>;
+ mediatek,portmap = <0x3f>;
+ ralink,fct2 = <0x0002500c>;
+ /*
+ * ext phy base addr 31, rx/tx clock skew 0,
+ * turbo mii off, rgmi 3.3v off, port 5 polling off
+ * port5: enabled, gige, full-duplex, rx/tx-flow-control
+ * port6: enabled, gige, full-duplex, rx/tx-flow-control
+ */
+ ralink,fpa2 = <0x1f003fff>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "skyline,sl-r7205", "ralink,rt3052-soc";
+ model = "Skyline SL-R7205 Wireless 3G Router";
+
+ aliases {
+ led-boot = &led_wifi;
+ led-failsafe = &led_wifi;
+ led-running = &led_wifi;
+ led-upgrade = &led_wifi;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wifi: wifi {
+ label = "sl-r7205:green:wifi";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tenda,3g300m", "ralink,rt3052-soc";
+ model = "Tenda 3G300M";
+
+ aliases {
+ led-boot = &led_ap;
+ led-failsafe = &led_ap;
+ led-running = &led_ap;
+ led-upgrade = &led_ap;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 3grouter {
+ label = "3g300m:blue:3grouter";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_ap: ap {
+ label = "3g300m:blue:ap";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wisprouter {
+ label = "3g300m:blue:wisprouter";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wirelessrouter {
+ label = "3g300m:blue:wirelessrouter";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ 3g {
+ label = "3g300m:blue:3g";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wpsreset {
+ label = "3g300m:blue:wpsreset";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ mode {
+ label = "mode";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tenda,w306r-v2", "ralink,rt3052-soc";
+ model = "Tenda W306R V2.0";
+
+ aliases {
+ led-boot = &led_sys;
+ led-failsafe = &led_sys;
+ led-running = &led_sys;
+ led-upgrade = &led_sys;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_sys: sys {
+ label = "w306r-v20:green:sys";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "w306r-v20:green:wps";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "RESET/WPS";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3052_unbranded_wr512-3gn.dtsi"
+
+/ {
+ compatible = "unbranded,wr512-3gn-4m", "unbranded,wr512-3gn", "ralink,rt3052-soc";
+ model = "WR512-3GN (4M)";
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3c8000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3052_unbranded_wr512-3gn.dtsi"
+
+/ {
+ compatible = "unbranded,wr512-3gn-8m", "unbranded,wr512-3gn", "ralink,rt3052-soc";
+ model = "WR512-3GN (8M)";
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "unbranded,wr512-3gn", "ralink,rt3052-soc";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 3g {
+ label = "wr512-3gn:green:3g";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ gateway {
+ label = "wr512-3gn:green:gateway";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ ap {
+ label = "wr512-3gn:green:ap";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wps: wps {
+ label = "wr512-3gn:green:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ station {
+ label = "wr512-3gn:green:station";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset_wps {
+ label = "reset_wps";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ mode {
+ label = "mode";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "unbranded,xdx-rn502j", "ralink,rt3052-soc";
+ model = "XDX RN502J";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "xdxrn502j:green:wifi";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "xdxrn502j:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "upvel,ur-326n4g", "ralink,rt3052-soc";
+ model = "UPVEL UR-326N4G";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 3g {
+ label = "ur-326n4g:green:3g";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ gateway {
+ label = "ur-326n4g:green:gateway";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ ap {
+ label = "ur-326n4g:green:ap";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wps: wps {
+ label = "ur-326n4g:green:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ station {
+ label = "ur-326n4g:green:station";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset_wps {
+ label = "reset_wps";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ mode {
+ label = "mode";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4004>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "upvel,ur-336un", "ralink,rt3052-soc";
+ model = "UPVEL UR-336UN";
+
+ aliases {
+ led-boot = &led_wps;
+ led-failsafe = &led_wps;
+ led-running = &led_wps;
+ led-upgrade = &led_wps;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 3g {
+ label = "ur-336un:green:3g";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ gateway {
+ label = "ur-336un:green:gateway";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ ap {
+ label = "ur-336un:green:ap";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wps: wps {
+ label = "ur-336un:green:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ station {
+ label = "ur-336un:green:station";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset_wps {
+ label = "reset_wps";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ mode {
+ label = "mode";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4004>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zyxel,keenetic", "ralink,rt3052-soc";
+ model = "ZyXEL Keenetic";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "kn:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "kn:green:usb";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&otg_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wps {
+ label = "kn:green:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zyxel,nbg-419n", "ralink,rt3052-soc";
+ model = "ZyXEL NBG-419N";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "nbg-419n:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "nbg-419n:green:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3352.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "allnet,all5002", "ralink,rt3352-soc";
+ model = "Allnet ALL5002";
+
+ i2c-gpio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "i2c-gpio";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <10>;
+
+ pcf0: iexp@38 {
+ #gpio-cells = <2>;
+ compatible = "inxp,pcf8574a";
+ reg = <0x38>;
+ gpio-controller;
+ };
+
+ hwmon@4b {
+ compatible = "national,lm92";
+ reg = <0x4b>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ld1 {
+ label = "all5002:green:ld1";
+ gpios = <&pcf0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ ld2 {
+ label = "all5002:green:ld2";
+ gpios = <&pcf0 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3352.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dir-615-h1", "ralink,rt3352-soc";
+ model = "D-Link DIR-615 H1";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_green;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_green;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "dir-615-h1:amber:status";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_green: status2 {
+ label = "dir-615-h1:green:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ wan {
+ label = "dir-615-h1:amber:wan";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wan2 {
+ label = "dir-615-h1:green:wan";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "dir-615-h1:blue:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins &mdio_pins>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3352.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dir-620-d1", "ralink,rt3352-soc";
+ model = "D-Link DIR-620 D1";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "dir-620-d1:green:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "dir-620-d1:green:wifi";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset_wps {
+ label = "reset_wps";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins &mdio_pins>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3352.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zyxel,nbg-419n-v2", "ralink,rt3352-soc";
+ model = "ZyXEL NBG-419N v2";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ palmbus@10000000 {
+ spi@b00 {
+ status = "okay";
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "nbg-419n2:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "nbg-419n2:green:wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "nbg-419n2:green:usb";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ rfkill {
+ label = "rfkill";
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_7links_px-4885.dtsi"
+
+/ {
+ compatible = "7links,px-4885-4m", "7links,px-4885", "ralink,rt5350-soc";
+ model = "7Links PX-4885 (4M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "devdata";
+ reg = <0x20000 0x20000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_7links_px-4885.dtsi"
+
+/ {
+ compatible = "7links,px-4885-8m", "7links,px-4885", "ralink,rt5350-soc";
+ model = "7Links PX-4885 (8M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "devdata";
+ reg = <0x20000 0x20000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "devconf";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "7links,px-4885", "ralink,rt5350-soc";
+
+ aliases {
+ led-boot = &led_wifi;
+ led-failsafe = &led_wifi;
+ led-running = &led_wifi;
+ led-upgrade = &led_wifi;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wifi: wifi {
+ label = "px-4885:orange:wifi";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ storage {
+ label = "px-4885:blue:storage";
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "airlive,air3gii", "ralink,rt5350-soc";
+ model = "AirLive Air3GII";
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "air3gii:green:wlan";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ mobile {
+ label = "air3gii:green:mobile";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "allnet,all5003", "ralink,rt5350-soc";
+ model = "Allnet ALL5003";
+
+ i2c-gpio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "i2c-gpio";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH &gpio0 2 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <10>;
+
+ pcf0: iexp@38 {
+ #gpio-cells = <2>;
+ compatible = "inxp,pcf8574a";
+ reg = <0x38>;
+ gpio-controller;
+ };
+
+ hwmon@4b {
+ compatible = "national,lm92";
+ reg = <0x4b>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ld1 {
+ label = "all5003:green:ld1";
+ gpios = <&pcf0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ ld2 {
+ label = "all5003:green:ld2";
+ gpios = <&pcf0 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_asiarf_awm002-evb.dtsi"
+
+/ {
+ compatible = "asiarf,awm002-evb-4m", "ralink,rt5350-soc";
+ model = "AsiaRF AWM002 EVB (4M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80: m25p80@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_asiarf_awm002-evb.dtsi"
+
+/ {
+ compatible = "asiarf,awm002-evb-8m", "ralink,rt5350-soc";
+ model = "AsiaRF AWM002 EVB (8M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80: m25p80@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asiarf,awm002-evb", "ralink,rt5350-soc";
+
+ leds {
+ compatible = "gpio-leds";
+
+ tx {
+ label = "awm002-evb:green:tx";
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ rx {
+ label = "awm002-evb:green:rx";
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "awm002-evb:green:wps";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset_wps {
+ label = "reset_wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ mode {
+ label = "mode";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&esw {
+ mediatek,portmap = <0x3f>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dcs-930l-b1", "ralink,rt5350-soc";
+ model = "D-Link DCS-930L B1";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "dcs-930l-b1:red:power";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "dcs-930l-b1:blue:wps";
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dir-300-b7", "ralink,rt5350-soc";
+ model = "D-Link DIR-300 B7";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "dir-300-b7:green:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "dir-300-b7:blue:wps";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <0x17>;
+};
+
+&wmac {
+ status = "okay";
+ ralink,led-polarity = <1>;
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dir-320-b1", "ralink,rt5350-soc";
+ model = "D-Link DIR-320 B1";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "dir-320-b1:green:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "dir-320-b1:green:usb";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "dir-320-b1:green:wps";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ root_hub {
+ gpio-export,name = "root_hub";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <0x17>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dir-610-a1", "ralink,rt5350-soc";
+ model = "D-Link DIR-610 A1";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "dir-610-a1:green:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "dir-610-a1:green:wps";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ devdata: partition@30000 {
+ label = "devdata";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "seama";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&devdata 0x4004>;
+};
+
+&esw {
+ status = "okay";
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <0x17>;
+};
+
+&wmac {
+ status = "okay";
+ ralink,led-polarity = <1>;
+ ralink,mtd-eeprom = <&devdata 0x4000>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dlink,dwr-512-b", "ralink,rt5350-soc";
+ model = "D-Link DWR-512 B";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sms {
+ label = "dwr-512-b:green:sms";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+ led_status: status {
+ label = "dwr-512-b:green:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+ 2g {
+ label = "dwr-512-b:green:2g";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+ 3g {
+ label = "dwr-512-b:green:3g";
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+ };
+ sstrengthr {
+ label = "dwr-512-b:red:sigstrength";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+ sstrengthg {
+ label = "dwr-512-b:green:sigstrength";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ slic_int {
+ gpio-export,name = "slic_int";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ };
+ modem3g_enable {
+ gpio-export,name = "modem3g_enable";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "jboot";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "amit,jimage";
+ label = "firmware";
+ reg = <0x10000 0x7e0000>;
+ };
+
+ config: partition@7f0000 {
+ label = "config";
+ reg = <0x7f0000 0x10000>;
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+
+ spidev@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "siliconlabs,si3210";
+
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+ðernet {
+ mtd-mac-address = <&config 0xe07e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&config 0xe08a>;
+ ralink,led-polarity = <1>;
+ mtd-mac-address = <&config 0xe07e>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+/ {
+ compatible = "easyacc,wizard-8800", "ralink,rt5350-soc";
+ model = "EASYACC WI-STOR WIZARD 8800";
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "hame,mpr-a1", "ralink,rt5350-soc";
+ model = "HAME MPR-A1";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "mpr-a1:blue:system";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ label = "mpr-a1:red:power";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ root_hub {
+ gpio-export,name = "root_hub";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "hame,mpr-a2", "ralink,rt5350-soc";
+ model = "HAME MPR-A2";
+
+ aliases {
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "mpr-a2:blue:system";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ label = "mpr-a2:red:power";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ root_hub {
+ gpio-export,name = "root_hub";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x1>;
+ mediatek,portdisable = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "hilink,hlk-rm04", "ralink,rt5350-soc";
+ model = "HILINK HLK-RM04";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x1000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS1,57600";
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ /* I2C */
+ gpio1 {
+ /* I2C_I2C_SD */
+ gpio-export,name = "hlk-rm04:gpio0";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ };
+ gpio2 {
+ /* I2C_I2C_SCLK */
+ gpio-export,name = "hlk-rm04:gpio1";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag";
+ ralink,function = "gpio";
+ };
+
+ uartf_gpio {
+ ralink,group = "uartf";
+ ralink,function = "gpio uartf";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "hootoo,ht-tm02", "ralink,rt5350-soc";
+ model = "HooToo HT-TM02";
+
+ aliases {
+ led-boot = &led_wlan;
+ led-failsafe = &led_wlan;
+ led-running = &led_wlan;
+ led-upgrade = &led_wlan;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wlan: wlan {
+ label = "ht-tm02:blue:wlan";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "ht-tm02:green:lan";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ modeswitch {
+ label = "modeswitch";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x10>;
+ mediatek,portdisable = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "intenso,memory2move", "ralink,rt5350-soc";
+ model = "Intenso Memory 2 Move";
+
+ aliases {
+ led-boot = &led_wifi;
+ led-failsafe = &led_wifi;
+ led-running = &led_wifi;
+ led-upgrade = &led_wifi;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_wifi: wifi {
+ label = "m2m:blue:wifi";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "m2m:green:wan";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ power {
+ label = "power";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "Config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "Factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_nexx_wt1520.dtsi"
+
+/ {
+ compatible = "nexx,wt1520-4m", "nexx,wt1520", "ralink,rt5350-soc";
+ model = "Nexx WT1520 (4M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_nexx_wt1520.dtsi"
+
+/ {
+ compatible = "nexx,wt1520-8m", "nexx,wt1520", "ralink,rt5350-soc";
+ model = "Nexx WT1520 (8M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "nexx,wt1520", "ralink,rt5350-soc";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_nixcore_x1.dtsi"
+
+/ {
+ compatible = "nixcore,x1-16m", "nixcore,x1", "ralink,rt5350-soc";
+ model = "NixcoreX1 (16M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_nixcore_x1.dtsi"
+
+/ {
+ compatible = "nixcore,x1-8m", "nixcore,x1", "ralink,rt5350-soc";
+ model = "NixcoreX1 (8M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "nixcore,x1", "ralink,rt5350-soc";
+
+ chosen {
+ bootargs = "console=ttyS1,57600";
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio0 {
+ gpio-export,name = "gpio0";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio1 {
+ gpio-export,name = "gpio1";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* GPIOs 1-6 are I2C,SPI */
+ /* GPIO 7-14 are uart1 */
+ /* GPIOs 15 & 16 are uart2 */
+ /* JTAG */
+
+ gpio17 {
+ /* JTAG_TDO */
+ gpio-export,name = "gpio17";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio18 {
+ /* JTAG_TDI */
+ gpio-export,name = "gpio18";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio19 {
+ /* JTAG_TMS */
+ gpio-export,name = "gpio19";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio20 {
+ /* JTAG_TCLK */
+ gpio-export,name = "gpio20";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio21 {
+ /* JTAG_TRST_N */
+ gpio-export,name = "gpio21";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* ETH LEDs */
+ /*
+ gpio22 {
+ gpio-export,name = "gpio22";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio23 {
+ gpio-export,name = "gpio23";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio24 {
+ gpio-export,name = "gpio24";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio25 {
+ gpio-export,name = "gpio25";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ */
+ gpio26 {
+ /* ETH4_LED */
+ gpio-export,name = "gpio26";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio27 {
+ /* spi_cs1 */
+ gpio-export,name = "gpio27";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+ reset-names = "gpio uartf";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "jtag", "led", "spi_cs1";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x17>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_olimex_rt5350f-olinuxino.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "olimex,rt5350f-olinuxino-evb", "ralink,rt5350-soc";
+ model = "Olimex RT5350F-OLinuXino-EVB";
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ relay1 {
+ gpio-export,name = "relay1";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ relay2 {
+ gpio-export,name = "relay2";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ button {
+ gpio-export,name = "button";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_olimex_rt5350f-olinuxino.dtsi"
+
+/ {
+ compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";
+ model = "Olimex RT5350F-OLinuXino";
+};
--- /dev/null
+#include "rt5350.dtsi"
+
+/ {
+ compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";
+
+ aliases {
+ serial0 = &uartlite;
+ serial1 = &uart;
+ };
+};
+
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "jtag";
+ ralink,function = "gpio";
+ };
+ uartf_gpio {
+ ralink,group = "uartf";
+ ralink,function = "gpio uartf";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <0x17>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "omnima,miniembplug", "ralink,rt5350-soc";
+ model = "Omnima MiniEMBPlug";
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "miniembplug:red:wlan";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ mobile {
+ label = "miniembplug:green:mobile";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ mode-one {
+ label = "mode1";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ mode-two {
+ label = "mode2";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "planex,mzk-dp150n", "ralink,rt5350-soc";
+ model = "Planex MZK-DP150N";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "mzk-dp150n:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&spi1 {
+ spidev@0 {
+ compatible = "linux,spidev";
+ spi-max-frequency = <10000000>;
+ reg = <0>;
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "jtag", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x17>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "poray,m3", "ralink,rt5350-soc";
+ model = "Poray M3";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "m3:blue:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ mode {
+ label = "mode";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <1>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_poray_m4.dtsi"
+
+/ {
+ compatible = "poray,m4-4m", "poray,m4", "ralink,rt5350-soc";
+ model = "Poray M4 (4M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_poray_m4.dtsi"
+
+/ {
+ compatible = "poray,m4-8m", "poray,m4", "ralink,rt5350-soc";
+ model = "Poray M4 (8M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "poray,m4", "ralink,rt5350-soc";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "m4:blue:status";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <1>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "poray,x5", "ralink,rt5350-soc";
+ model = "Poray X5";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "x5:green:power";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ 20 {
+ label = "x5:green:20";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+
+ 50 {
+ label = "x5:green:50";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ 80 {
+ label = "x5:green:80";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ bat {
+ label = "bat";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ mode {
+ label = "mode";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb-mode {
+ gpio-export,name = "usb-mode";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <1>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "poray,x8", "ralink,rt5350-soc";
+ model = "Poray X8";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "x8:green:power";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <1>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tenda,3g150b", "ralink,rt5350-soc";
+ model = "Tenda 3G150B";
+
+ aliases {
+ led-boot = &led_ap;
+ led-failsafe = &led_ap;
+ led-running = &led_ap;
+ led-upgrade = &led_ap;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_ap: ap {
+ label = "3g150b:blue:ap";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ 3g {
+ label = "3g150b:blue:3g";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "trendnet,tew-714tru", "ralink,rt5350-soc";
+ model = "TRENDnet TEW714TRU";
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "tew-714tru:red:usb";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ wifi {
+ label = "tew-714tru:green:wifi";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ repeater {
+ gpio-export,name = "repeater_switch";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ wisp {
+ gpio-export,name = "wisp_switch";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x1>;
+ mediatek,portdisable = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "unbranded,a5-v11", "ralink,rt5350-soc";
+ model = "A5-V11";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system {
+ label = "a5-v11:blue:system";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "a5-v11:red:power";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ root_hub {
+ gpio-export,name = "root_hub";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x1>;
+ mediatek,portdisable = <0x3e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_vocore_vocore.dtsi"
+
+/ {
+ compatible = "vocore,vocore-16m", "vocore,vocore", "ralink,rt5350-soc";
+ model = "VoCore (16M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350_vocore_vocore.dtsi"
+
+/ {
+ compatible = "vocore,vocore-8m", "vocore,vocore", "ralink,rt5350-soc";
+ model = "VoCore (8M)";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
--- /dev/null
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "vocore,vocore", "ralink,rt5350-soc";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio0 {
+ gpio-export,name = "gpio0";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* UARTF */
+ gpio7 {
+ /* UARTF_RTS_N */
+ gpio-export,name = "gpio7";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio8 {
+ /* UARTF_TXD */
+ gpio-export,name = "gpio8";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio9 {
+ /* UARTF_CTS_N */
+ gpio-export,name = "gpio9";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio12 {
+ /* UARTF_DCD_N */
+ gpio-export,name = "gpio12";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio13 {
+ /* UARTF_DSR_N */
+ gpio-export,name = "gpio13";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio14 {
+ /* UARTF_RIN */
+ gpio-export,name = "gpio14";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* JTAG */
+ gpio17 {
+ /* JTAG_TDO */
+ gpio-export,name = "gpio17";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio18 {
+ /* JTAG_TDI */
+ gpio-export,name = "gpio18";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio19 {
+ /* JTAG_TMS */
+ gpio-export,name = "gpio19";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio20 {
+ /* JTAG_TCLK */
+ gpio-export,name = "gpio20";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio21 {
+ /* JTAG_TRST_N */
+ gpio-export,name = "gpio21";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* ETH LEDs */
+ gpio22 {
+ /* ETH0_LED */
+ gpio-export,name = "gpio22";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio23 {
+ /* ETH1_LED */
+ gpio-export,name = "gpio23";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio24 {
+ /* ETH2_LED */
+ gpio-export,name = "gpio24";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio25 {
+ /* ETH3_LED */
+ gpio-export,name = "gpio25";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio26 {
+ /* ETH4_LED */
+ gpio-export,name = "gpio26";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ /* UARTF_RXD */
+ label = "vocore:green:status";
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ eth {
+ /* UARTF_DTR_N */
+ label = "vocore:orange:eth";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "jtag", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x11>;
+ mediatek,portdisable = <0x2e>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+
+ spidev@0 {
+ compatible = "linux,spidev";
+ spi-max-frequency = <10000000>;
+ reg = <0>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+/ {
+ compatible = "wansview,ncs601w", "ralink,rt5350-soc";
+ model = "Wansview NCS601W";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
+ model = "WIZnet WizFi630A";
+
+ aliases {
+ led-boot = &led_run;
+ led-failsafe = &led_run;
+ led-running = &led_run;
+ led-upgrade = &led_run;
+ };
+
+ chosen {
+ bootargs = "console=ttyS1,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_run: run {
+ label = "wizfi630a::run";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wizfi630a::wps";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ uart1 {
+ label = "wizfi630a::uart1";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+
+ uart2 {
+ label = "wizfi630a::uart2";
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ scm1 {
+ label = "SCM1";
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ scm2 {
+ label = "SCM2";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ #size-cells = <1>;
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ #size-cells = <1>;
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ #size-cells = <1>;
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ #size-cells = <1>;
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uartf_pins>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag" ;
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0x17>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zorlik,zl5900v2", "ralink,rt5350-soc";
+ model = "Zorlik ZL5900V2";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "zl5900v2:green:lan";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power: power {
+ label = "zl5900v2:blue:power";
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portmap = <0>;
+ mediatek,portdisable = <0x2f>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zyxel,keenetic-start", "ralink,rt5350-soc";
+ model = "ZyXEL Keenetic Start";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: power {
+ label = "zyxel:green:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "zyxel:green:internet";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,led_polarity = <0x17>;
+};
+
+&wmac {
+ status = "okay";
+ ralink,led-polarity = <1>;
+ ralink,mtd-eeprom = <&factory 0>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "belkin,f7c027", "ralink,rt5350-soc";
+ model = "Belkin F7C027";
+
+ aliases {
+ led-boot = &led_status_orange;
+ led-failsafe = &led_status_orange;
+ led-running = &led_status_orange;
+ led-upgrade = &led_status_orange;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "f7c027:blue:status";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ label = "f7c027:blue:power";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_orange: orange {
+ label = "f7c027:orange:status";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ relay {
+ label = "f7c027:device:relay";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ top {
+ label = "restore";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ power {
+ label = "power";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ sensor {
+ label = "sensor";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x770000>;
+ };
+
+ partition@7c0000 {
+ label = "firmware2";
+ reg = <0x7c0000 0x770000>;
+ };
+
+ partition@f30000 {
+ label = "belkin_settings";
+ reg = <0xf30000 0xa0000>;
+ };
+
+ partition@fd0000 {
+ label = "unknown";
+ reg = <0xfd0000 0x10000>;
+ };
+
+ partition@fe0000 {
+ label = "nvram";
+ reg = <0xfe0000 0x10000>;
+ };
+
+ partition@ff0000 {
+ label = "user_factory";
+ reg = <0xff0000 0x10000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
define Device/tenda_3g150b
- DTS := 3G150B
+ MTK_SOC := rt5350
BLOCKSIZE := 4k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
UIMAGE_NAME:= Linux Kernel Image
TARGET_DEVICES += tenda_3g150b
define Device/tenda_3g300m
- DTS := 3G300M
+ MTK_SOC := rt3052
IMAGE_SIZE := $(ralink_default_fw_size_4M)
UIMAGE_NAME := 3G150M_SPI Kernel Image
DEVICE_VENDOR := Tenda
TARGET_DEVICES += tenda_3g300m
define Device/edimax_3g-6200n
- DTS := 3G-6200N
+ MTK_SOC := rt3050
IMAGE_SIZE := 3648k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
edimax-header -s CSYS -m 3G62 -f 0x50000 -S 0x01100000 | pad-rootfs | \
TARGET_DEVICES += edimax_3g-6200n
define Device/edimax_3g-6200nl
- DTS := 3G-6200NL
+ MTK_SOC := rt3050
IMAGE_SIZE := 3648k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
edimax-header -s CSYS -m 3G62 -f 0x50000 -S 0x01100000 | pad-rootfs | \
TARGET_DEVICES += edimax_3g-6200nl
define Device/unbranded_a5-v11
- DTS := A5-V11
+ MTK_SOC := rt5350
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
IMAGE/factory.bin := \
TARGET_DEVICES += unbranded_a5-v11
define Device/airlive_air3gii
- DTS := AIR3GII
+ MTK_SOC := rt5350
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := AirLive
TARGET_DEVICES += airlive_air3gii
define Device/allnet_all0256n-4m
- DTS := ALL0256N-4M
+ MTK_SOC := rt3050
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := Allnet
DEVICE_MODEL := ALL0256N
TARGET_DEVICES += allnet_all0256n-4m
define Device/allnet_all0256n-8m
- DTS := ALL0256N-8M
+ MTK_SOC := rt3050
DEVICE_VENDOR := Allnet
DEVICE_MODEL := ALL0256N
DEVICE_VARIANT := 8M
TARGET_DEVICES += allnet_all0256n-8m
define Device/allnet_all5002
- DTS := ALL5002
+ MTK_SOC := rt3352
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Allnet
DEVICE_MODEL := ALL5002
TARGET_DEVICES += allnet_all5002
define Device/allnet_all5003
- DTS := ALL5003
+ MTK_SOC := rt5350
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Allnet
DEVICE_MODEL := ALL5003
TARGET_DEVICES += allnet_all5003
define Device/alphanetworks_asl26555-8m
- DTS := ASL26555-8M
+ MTK_SOC := rt3050
IMAGE_SIZE := 7744k
DEVICE_VENDOR := Alpha
DEVICE_MODEL := ASL26555
TARGET_DEVICES += alphanetworks_asl26555-8m
define Device/alphanetworks_asl26555-16m
- DTS := ASL26555-16M
+ MTK_SOC := rt3050
IMAGE_SIZE := 15872k
DEVICE_VENDOR := Alpha
DEVICE_MODEL := ASL26555
TARGET_DEVICES += alphanetworks_asl26555-16m
define Device/argus_atp-52b
- DTS := ATP-52B
+ MTK_SOC := rt3052
IMAGE_SIZE := 7808k
DEVICE_VENDOR := Argus
DEVICE_MODEL := ATP-52B
TARGET_DEVICES += argus_atp-52b
define Device/asiarf_awm002-evb-4m
- DTS := AWM002-EVB-4M
+ MTK_SOC := rt5350
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := AsiaRF
DEVICE_MODEL := AWM002-EVB
TARGET_DEVICES += asiarf_awm002-evb-4m
define Device/asiarf_awm002-evb-8m
- DTS := AWM002-EVB-8M
+ MTK_SOC := rt5350
DEVICE_VENDOR := AsiaRF
DEVICE_MODEL := AWM002-EVB/AWM003-EVB
DEVICE_VARIANT := 8M
TARGET_DEVICES += asiarf_awm002-evb-8m
define Device/asiarf_awapn2403
- DTS := AWAPN2403
+ MTK_SOC := rt3052
BLOCKSIZE := 4k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := AsiaRF
TARGET_DEVICES += asiarf_awapn2403
define Device/nexaira_bc2
- DTS := BC2
+ MTK_SOC := rt3052
DEVICE_VENDOR := NexAira
DEVICE_MODEL := BC2
SUPPORTED_DEVICES += bc2
TARGET_DEVICES += nexaira_bc2
define Device/hauppauge_broadway
- DTS := BROADWAY
+ MTK_SOC := rt3052
IMAGE_SIZE := 7744k
UIMAGE_NAME:= Broadway Kernel Image
DEVICE_VENDOR := Hauppauge
TARGET_DEVICES += hauppauge_broadway
define Device/8devices_carambola
- DTS := CARAMBOLA
- DEVICE_VENDOR := 8devices
+ MTK_SOC := rt3050
+ DEVICE_VENDOR := 8devices
DEVICE_MODEL := Carambola
DEVICE_PACKAGES :=
SUPPORTED_DEVICES += carambola
TARGET_DEVICES += 8devices_carambola
define Device/huawei_d105
- DTS := D105
+ MTK_SOC := rt3050
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := Huawei
TARGET_DEVICES += huawei_d105
define Device/dlink_dap-1350
- DTS := DAP-1350
+ MTK_SOC := rt3052
IMAGES += factory.bin factory-NA.bin
IMAGE_SIZE := 7488k
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
TARGET_DEVICES += dlink_dap-1350
define Device/dlink_dcs-930
- DTS := DCS-930
+ MTK_SOC := rt3050
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DCS-930
TARGET_DEVICES += dlink_dcs-930
define Device/dlink_dcs-930l-b1
- DTS := DCS-930L-B1
+ MTK_SOC := rt5350
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DCS-930L
TARGET_DEVICES += dlink_dcs-930l-b1
define Device/dlink_dir-300-b1
- DTS := DIR-300-B1
+ MTK_SOC := rt3050
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
IMAGE/factory.bin := \
TARGET_DEVICES += dlink_dir-300-b1
define Device/dlink_dir-300-b7
- DTS := DIR-300-B7
+ MTK_SOC := rt5350
BLOCKSIZE := 4k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := D-Link
TARGET_DEVICES += dlink_dir-300-b7
define Device/dlink_dir-320-b1
- DTS := DIR-320-B1
+ MTK_SOC := rt5350
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-320
DEVICE_VARIANT := B1
TARGET_DEVICES += dlink_dir-320-b1
define Device/dlink_dir-600-b1
- DTS := DIR-600-B1
+ MTK_SOC := rt3050
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
IMAGE/factory.bin := \
define Device/dlink_dir-610-a1
$(Device/seama)
- DTS := DIR-610-A1
+ MTK_SOC := rt5350
BLOCKSIZE := 4k
SEAMA_SIGNATURE := wrgn59_dlob.hans_dir610
KERNEL := $(KERNEL_DTB)
TARGET_DEVICES += dlink_dir-610-a1
define Device/dlink_dir-615-d
- DTS := DIR-615-D
+ MTK_SOC := rt3050
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
IMAGE/factory.bin := \
define Device/dlink_dir-615-h1
- DTS := DIR-615-H1
+ MTK_SOC := rt3352
BLOCKSIZE := 4k
IMAGES += factory.bin
IMAGE_SIZE := $(ralink_default_fw_size_4M)
TARGET_DEVICES += dlink_dir-615-h1
define Device/dlink_dir-620-a1
- DTS := DIR-620-A1
+ MTK_SOC := rt3050
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-620
DEVICE_VARIANT := A1
TARGET_DEVICES += dlink_dir-620-a1
define Device/dlink_dir-620-d1
- DTS := DIR-620-D1
+ MTK_SOC := rt3352
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-620
DEVICE_VARIANT := D1
TARGET_DEVICES += dlink_dir-620-d1
define Device/dlink_dwr-512-b
- DTS := DWR-512-B
+ MTK_SOC := rt5350
IMAGE_SIZE := 7800k
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DWR-512
TARGET_DEVICES += dlink_dwr-512-b
define Device/engenius_esr-9753
- DTS := ESR-9753
+ MTK_SOC := rt3052
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := EnGenius
TARGET_DEVICES += engenius_esr-9753
define Device/belkin_f5d8235-v2
- DTS := F5D8235_V2
+ MTK_SOC := rt3052
IMAGE_SIZE := 7744k
DEVICE_VENDOR := Belkin
DEVICE_MODEL := F5D8235
TARGET_DEVICES += belkin_f5d8235-v2
define Device/belkin_f7c027
- DTS := F7C027
+ MTK_SOC := rt5352
IMAGE_SIZE := 7616k
DEVICE_VENDOR := Belkin
DEVICE_MODEL := F7C027
TARGET_DEVICES += belkin_f7c027
define Device/fon_fonera-20n
- DTS := FONERA20N
+ MTK_SOC := rt3052
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | \
edimax-header -s RSDK -m NL1T -f 0x50000 -S 0xc0000
TARGET_DEVICES += fon_fonera-20n
define Device/arcwireless_freestation5
- DTS := FREESTATION5
+ MTK_SOC := rt3050
DEVICE_VENDOR := ARC Wireless
DEVICE_MODEL := FreeStation
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-rt2500-usb kmod-rt2800-usb kmod-rt2x00-usb
TARGET_DEVICES += arcwireless_freestation5
define Device/huawei_hg255d
- DTS := HG255D
+ MTK_SOC := rt3052
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := HuaWei
DEVICE_MODEL := HG255D
TARGET_DEVICES += huawei_hg255d
define Device/hilink_hlk-rm04
- DTS := HLKRM04
+ MTK_SOC := rt5350
IMAGES += factory.bin
IMAGE/factory.bin := \
$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | hilink-header
TARGET_DEVICES += hilink_hlk-rm04
define Device/hootoo_ht-tm02
- DTS := HT-TM02
+ MTK_SOC := rt5350
DEVICE_VENDOR := HooToo
DEVICE_MODEL := HT-TM02
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
TARGET_DEVICES += hootoo_ht-tm02
define Device/aztech_hw550-3g
- DTS := HW550-3G
+ MTK_SOC := rt3052
DEVICE_VENDOR := Aztech
DEVICE_MODEL := HW550-3G
DEVICE_PACKAGES := kmod-usb-core kmod-usb-dwc2 kmod-usb-ledtrig-usbport
TARGET_DEVICES += aztech_hw550-3g
define Device/poray_ip2202
- DTS := IP2202
+ MTK_SOC := rt3052
DEVICE_VENDOR := Poray
DEVICE_MODEL := IP2202
SUPPORTED_DEVICES += ip2202
TARGET_DEVICES += poray_ip2202
define Device/jcg_jhr-n805r
- DTS := JHR-N805R
+ MTK_SOC := rt3050
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
IMAGE/factory.bin := \
TARGET_DEVICES += jcg_jhr-n805r
define Device/jcg_jhr-n825r
- DTS := JHR-N825R
+ MTK_SOC := rt3052
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
IMAGE/factory.bin := \
TARGET_DEVICES += jcg_jhr-n825r
define Device/jcg_jhr-n926r
- DTS := JHR-N926R
+ MTK_SOC := rt3052
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
IMAGE/factory.bin := \
TARGET_DEVICES += jcg_jhr-n926r
define Device/intenso_memory2move
- DTS := M2M
+ MTK_SOC := rt5350
UIMAGE_NAME:= Linux Kernel Image
DEVICE_VENDOR := Intenso
DEVICE_MODEL := Memory 2 Move
TARGET_DEVICES += intenso_memory2move
define Device/poray_m3
- DTS := M3
+ MTK_SOC := rt5350
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
IMAGE/factory.bin := \
TARGET_DEVICES += poray_m3
define Device/poray_m4-4m
- DTS := M4-4M
+ MTK_SOC := rt5350
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
IMAGE/factory.bin := \
TARGET_DEVICES += poray_m4-4m
define Device/poray_m4-8m
- DTS := M4-8M
+ MTK_SOC := rt5350
IMAGES += factory.bin
IMAGE/factory.bin := \
$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | poray-header -B M4 -F 8M
TARGET_DEVICES += poray_m4-8m
define Device/omnima_miniembplug
- DTS := MINIEMBPLUG
+ MTK_SOC := rt5350
DEVICE_VENDOR := Omnima
DEVICE_MODEL := MiniEMBPlug
SUPPORTED_DEVICES += miniembplug
TARGET_DEVICES += omnima_miniembplug
define Device/omnima_miniembwifi
- DTS := MINIEMBWIFI
+ MTK_SOC := rt3052
DEVICE_VENDOR := Omnima
DEVICE_MODEL := MiniEMBWiFi
SUPPORTED_DEVICES += miniembwifi
TARGET_DEVICES += omnima_miniembwifi
define Device/mofinetwork_mofi3500-3gn
- DTS := MOFI3500-3GN
+ MTK_SOC := rt3052
DEVICE_VENDOR := MoFi Network
DEVICE_MODEL := MOFI3500-3GN
SUPPORTED_DEVICES += mofi3500-3gn
TARGET_DEVICES += mofinetwork_mofi3500-3gn
define Device/hame_mpr-a1
- DTS := MPRA1
+ MTK_SOC := rt5350
BLOCKSIZE := 4k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
UIMAGE_NAME:= Linux Kernel Image
TARGET_DEVICES += hame_mpr-a1
define Device/hame_mpr-a2
- DTS := MPRA2
+ MTK_SOC := rt5350
UIMAGE_NAME:= Linux Kernel Image
DEVICE_VENDOR := HAME
DEVICE_MODEL := MPR
TARGET_DEVICES += hame_mpr-a2
define Device/aximcom_mr-102n
- DTS := MR-102N
+ MTK_SOC := rt3052
DEVICE_VENDOR := AXIMCom
DEVICE_MODEL := MR-102N
SUPPORTED_DEVICES += mr-102n
TARGET_DEVICES += aximcom_mr-102n
define Device/planex_mzk-dp150n
- DTS := MZK-DP150N
+ MTK_SOC := rt5350
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := Planex
TARGET_DEVICES += planex_mzk-dp150n
define Device/planex_mzk-w300nh2
- DTS := MZK-W300NH2
+ MTK_SOC := rt3052
IMAGE_SIZE := 3648k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | \
TARGET_DEVICES += planex_mzk-w300nh2
define Device/planex_mzk-wdpr
- DTS := MZK-WDPR
+ MTK_SOC := rt3052
DEVICE_VENDOR := Planex
DEVICE_MODEL := MZK-WDPR
SUPPORTED_DEVICES += mzk-wdpr
TARGET_DEVICES += planex_mzk-wdpr
define Device/zyxel_nbg-419n
- DTS := NBG-419N
+ MTK_SOC := rt3052
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := ZyXEL
TARGET_DEVICES += zyxel_nbg-419n
define Device/zyxel_nbg-419n-v2
- DTS := NBG-419N2
+ MTK_SOC := rt3352
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NBG-419N
TARGET_DEVICES += zyxel_nbg-419n-v2
define Device/wansview_ncs601w
- DTS := NCS601W
+ MTK_SOC := rt5350
DEVICE_VENDOR := Wansview
DEVICE_MODEL := NCS601W
DEVICE_PACKAGES := kmod-video-core kmod-video-uvc \
TARGET_DEVICES += wansview_ncs601w
define Device/nixcore_x1-8m
- DTS := NIXCORE-8M
+ MTK_SOC := rt5350
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Nixcore
DEVICE_MODEL := X1
TARGET_DEVICES += nixcore_x1-8m
define Device/nixcore_x1-16m
- DTS := NIXCORE-16M
+ MTK_SOC := rt5350
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Nixcore
DEVICE_MODEL := X1
TARGET_DEVICES += nixcore_x1-16m
define Device/netcore_nw718
- DTS := NW718
+ MTK_SOC := rt3050
IMAGE_SIZE := 3712k
UIMAGE_NAME:= ARA1B4NCRNW718;1
DEVICE_VENDOR := Netcore
TARGET_DEVICES += netcore_nw718
define Device/petatel_psr-680w
- DTS := PSR-680W
+ MTK_SOC := rt3052
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := Petatel
TARGET_DEVICES += petatel_psr-680w
define Device/prolink_pwh2004
- DTS := PWH2004
+ MTK_SOC := rt3052
DEVICE_VENDOR := Prolink
DEVICE_MODEL := PWH2004
DEVICE_PACKAGES :=
TARGET_DEVICES += prolink_pwh2004
define Device/7links_px-4885-4m
- DTS := PX-4885-4M
+ MTK_SOC := rt5350
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := 7Links
DEVICE_MODEL := PX-4885
TARGET_DEVICES += 7links_px-4885-4m
define Device/7links_px-4885-8m
- DTS := PX-4885-8M
+ MTK_SOC := rt5350
DEVICE_VENDOR := 7Links
DEVICE_MODEL := PX-4885
DEVICE_VARIANT := 8M
TARGET_DEVICES += 7links_px-4885-8m
define Device/olimex_rt5350f-olinuxino
- DTS := RT5350F-OLINUXINO
+ MTK_SOC := rt5350
DEVICE_VENDOR := OLIMEX
DEVICE_MODEL := RT5350F-OLinuXino
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 \
TARGET_DEVICES += olimex_rt5350f-olinuxino
define Device/olimex_rt5350f-olinuxino-evb
- DTS := RT5350F-OLINUXINO-EVB
+ MTK_SOC := rt5350
DEVICE_VENDOR := OLIMEX
DEVICE_MODEL := RT5350F-OLinuXino-EVB
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 \
TARGET_DEVICES += olimex_rt5350f-olinuxino-evb
define Device/asus_rt-g32-b1
- DTS := RT-G32-B1
+ MTK_SOC := rt3050
BLOCKSIZE := 4k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := Asus
TARGET_DEVICES += asus_rt-g32-b1
define Device/asus_rt-n10-plus
- DTS := RT-N10-PLUS
+ MTK_SOC := rt3050
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := Asus
TARGET_DEVICES += asus_rt-n10-plus
define Device/asus_rt-n13u
- DTS := RT-N13U
+ MTK_SOC := rt3052
DEVICE_VENDOR := Asus
DEVICE_MODEL := RT-N13U
DEVICE_PACKAGES := kmod-leds-gpio kmod-rt2800-pci kmod-usb-dwc2
TARGET_DEVICES += asus_rt-n13u
define Device/teltonika_rut5xx
- DTS := RUT5XX
+ MTK_SOC := rt3050
DEVICE_VENDOR := Teltonika
DEVICE_MODEL := RUT5XX
DEVICE_PACKAGES := om-watchdog
TARGET_DEVICES += teltonika_rut5xx
define Device/skyline_sl-r7205
- DTS := SL-R7205
+ MTK_SOC := rt3052
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := Skyline
TARGET_DEVICES += skyline_sl-r7205
define Device/trendnet_tew-638apb-v2
- DTS := TEW-638APB-V2
+ MTK_SOC := rt3050
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGE/sysupgrade.bin := $$(sysupgrade_bin) | umedia-header 0x026382 | \
TARGET_DEVICES += trendnet_tew-638apb-v2
define Device/trendnet_tew-714tru
- DTS := TEW-714TRU
+ MTK_SOC := rt5350
DEVICE_VENDOR := TRENDnet
DEVICE_MODEL := TEW-714TRU
SUPPORTED_DEVICES += tew-714tru
TARGET_DEVICES += trendnet_tew-714tru
define Device/upvel_ur-326n4g
- DTS := UR-326N4G
+ MTK_SOC := rt3052
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := UPVEL
TARGET_DEVICES += upvel_ur-326n4g
define Device/upvel_ur-336un
- DTS := UR-336UN
+ MTK_SOC := rt3052
DEVICE_VENDOR := UPVEL
DEVICE_MODEL := UR-336UN
DEVICE_PACKAGES := kmod-usb-core kmod-usb-dwc2 kmod-usb-ledtrig-usbport
TARGET_DEVICES += upvel_ur-336un
define Device/ralink_v22rw-2x2
- DTS := V22RW-2X2
+ MTK_SOC := rt3052
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := Ralink
TARGET_DEVICES += ralink_v22rw-2x2
define Device/vocore_vocore-8m
- DTS := VOCORE-8M
+ MTK_SOC := rt5350
IMAGE_SIZE := 7872k
DEVICE_VENDOR := VoCore
DEVICE_MODEL := VoCore
TARGET_DEVICES += vocore_vocore-8m
define Device/vocore_vocore-16m
- DTS := VOCORE-16M
+ MTK_SOC := rt5350
IMAGE_SIZE := 16064k
DEVICE_VENDOR := VoCore
DEVICE_MODEL := VoCore
TARGET_DEVICES += vocore_vocore-16m
define Device/tenda_w150m
- DTS := W150M
+ MTK_SOC := rt3050
IMAGE_SIZE := $(ralink_default_fw_size_4M)
UIMAGE_NAME:= W150M Kernel Image
DEVICE_VENDOR := Tenda
TARGET_DEVICES += tenda_w150m
define Device/tenda_w306r-v2
- DTS := W306R_V20
+ MTK_SOC := rt3052
IMAGE_SIZE := $(ralink_default_fw_size_4M)
UIMAGE_NAME:= linkn Kernel Image
DEVICE_VENDOR := Tenda
TARGET_DEVICES += tenda_w306r-v2
define Device/alfa-network_w502u
- DTS := W502U
+ MTK_SOC := rt3052
DEVICE_VENDOR := ALFA
DEVICE_MODEL := Networks W502U
SUPPORTED_DEVICES += w502u
TARGET_DEVICES += alfa-network_w502u
define Device/sparklan_wcr-150gn
- DTS := WCR150GN
+ MTK_SOC := rt3050
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := Sparklan
TARGET_DEVICES += sparklan_wcr-150gn
define Device/buffalo_whr-g300n
- DTS := WHR-G300N
+ MTK_SOC := rt3052
BLOCKSIZE := 64k
IMAGE_SIZE := 3801088
DEVICE_VENDOR := Buffalo
TARGET_DEVICES += buffalo_whr-g300n
define Device/easyacc_wizard-8800
- DTS := WIZARD8800
+ MTK_SOC := rt5350
UIMAGE_NAME:= Linux Kernel Image
DEVICE_VENDOR := EasyAcc
DEVICE_MODEL := WIZARD 8800
TARGET_DEVICES += easyacc_wizard-8800
define Device/wiznet_wizfi630a
- DTS := WIZFI630A
+ MTK_SOC := rt5350
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_VENDOR := WIZnet
DEVICE_MODEL := WizFi630A
TARGET_DEVICES += wiznet_wizfi630a
define Device/asus_wl-330n
- DTS := WL-330N
+ MTK_SOC := rt3050
BLOCKSIZE := 4k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := Asus
TARGET_DEVICES += asus_wl-330n
define Device/asus_wl-330n3g
- DTS := WL-330N3G
+ MTK_SOC := rt3050
BLOCKSIZE := 4k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := Asus
TARGET_DEVICES += asus_wl-330n3g
define Device/sitecom_wl-351
- DTS := WL-351
+ MTK_SOC := rt3052
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := Sitecom
TARGET_DEVICES += sitecom_wl-351
define Device/netgear_wnce2001
- DTS := WNCE2001
+ MTK_SOC := rt3052
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin factory-NA.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
TARGET_DEVICES += netgear_wnce2001
define Device/unbranded_wr512-3gn-4m
- DTS := WR512-3GN-4M
+ MTK_SOC := rt3052
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := Ralink
DEVICE_MODEL := WR512-3GN
TARGET_DEVICES += unbranded_wr512-3gn-4m
define Device/unbranded_wr512-3gn-8m
- DTS := WR512-3GN-8M
+ MTK_SOC := rt3052
DEVICE_VENDOR := Ralink
DEVICE_MODEL := WR512-3GN
DEVICE_VARIANT := 8M
TARGET_DEVICES += unbranded_wr512-3gn-8m
define Device/accton_wr6202
- DTS := WR6202
+ MTK_SOC := rt3052
DEVICE_VENDOR := Accton
DEVICE_MODEL := WR6202
SUPPORTED_DEVICES += wr6202
TARGET_DEVICES += accton_wr6202
define Device/nexx_wt1520-4m
- DTS := WT1520-4M
+ MTK_SOC := rt5350
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
IMAGE/factory.bin := \
TARGET_DEVICES += nexx_wt1520-4m
define Device/nexx_wt1520-8m
- DTS := WT1520-8M
+ MTK_SOC := rt5350
IMAGES += factory.bin
IMAGE/factory.bin := \
$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | poray-header -B WT1520 -F 8M
TARGET_DEVICES += nexx_wt1520-8m
define Device/poray_x5
- DTS := X5
+ MTK_SOC := rt5350
IMAGES += factory.bin
IMAGE/factory.bin := \
$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | poray-header -B X5 -F 8M
TARGET_DEVICES += poray_x5
define Device/poray_x8
- DTS := X8
+ MTK_SOC := rt5350
IMAGES += factory.bin
IMAGE/factory.bin := \
$$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | poray-header -B X8 -F 8M
TARGET_DEVICES += poray_x8
define Device/unbranded_xdx-rn502j
- DTS := XDXRN502J
+ MTK_SOC := rt3052
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := XDX
TARGET_DEVICES += unbranded_xdx-rn502j
define Device/zyxel_keenetic
- DTS := kn
+ MTK_SOC := rt3052
BLOCKSIZE := 64k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := ZyXEL
TARGET_DEVICES += zyxel_keenetic
define Device/zyxel_keenetic-start
- DTS := kn_st
+ MTK_SOC := rt5350
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := Keenetic Start
TARGET_DEVICES += zyxel_keenetic-start
define Device/zorlik_zl5900v2
- DTS := ZL5900V2
+ MTK_SOC := rt5350
DEVICE_VENDOR := Zorlik
DEVICE_MODEL := ZL5900V2
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-netdev
projects / openwrt / staging / ansuel.git / commitdiff