--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "Extreme Networks AP3935";
+ compatible = "extreme,ap3935", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x41400000 0x3ec00000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ serial0 = &gsbi7_serial;
+ serial1 = &gsbi2_serial;
+ mdio-gpio0 = &mdio0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac2;
+
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_orange;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs-override = "ubi.block=0,0 root=/dev/ubiblock0_0";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_orange: power_orange {
+ label = "orange:power";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wlan2g_green {
+ label = "green:wlan2g";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_wlan5g_green {
+ label = "green:wlan5g";
+ gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ led_lan1_green {
+ label = "green:lan1";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ };
+
+ led_lan1_orange {
+ label = "orange:lan1";
+ gpios = <&qcom_pinmux 27 GPIO_ACTIVE_LOW>;
+ };
+
+ led_lan2_green {
+ label = "green:lan2";
+ gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
+ };
+
+ led_lan2_orange {
+ label = "orange:lan2";
+ gpios = <&qcom_pinmux 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+
+&qcom_pinmux {
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-pull-down;
+ };
+
+ clk {
+ pins = "gpio21";
+ function = "gsbi5";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+
+ cs {
+ pins = "gpio20";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio22", "gpio23", "gpio24", "gpio25",
+ "gpio26", "gpio27", "gpio28", "gpio29";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio56";
+ function = "gpio";
+ bias-pull-up;
+ };
+ };
+};
+
+&gsbi2 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+
+ gsbi2_serial: serial@12490000 {
+ status = "okay";
+ };
+};
+
+&gsbi4 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+
+ serial@16340000 {
+ status = "disabled";
+ };
+};
+
+&gsbi7 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+
+ gsbi7_serial: serial@16640000 {
+ status = "okay";
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi4: spi@1a280000 {
+ status = "okay";
+ spi-max-frequency = <50000000>;
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+
+ cfg1@02a0000 {
+ compatible = "u-boot,env-redundant-bool";
+ label = "CFG1";
+ reg = <0x02a0000 0x0010000>;
+
+ ethaddr: ethaddr {
+ };
+ };
+
+ bootpri@02b0000 {
+ label = "BootPRI";
+ reg = <0x02b0000 0x0080000>;
+ };
+
+ cfg2@0330000 {
+ label = "CFG2";
+ reg = <0x0330000 0x0010000>;
+ };
+
+ fs@0340000 {
+ label = "FS";
+ reg = <0x0340000 0x0080000>;
+ };
+
+ priimg@03c0000 {
+ label = "PriImg";
+ reg = <0x03c0000 0x0e10000>;
+ };
+
+ secimg@11d0000 {
+ label = "SecImg";
+ reg = <0x11d0000 0x0e10000>;
+ };
+ };
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ compatible = "qcom,nandcs";
+
+ reg = <0>;
+
+ nand-ecc-strength = <8>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ubi@0 {
+ label = "ubi";
+ reg = <0x0000000 0x20000000>;
+ };
+ };
+ };
+};
+
+&soc {
+ mdio1: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ };
+};
+
+&gmac0 {
+ status = "okay";
+
+ qcom,id = <0>;
+ mdiobus = <&mdio1>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+
+ nvmem-cells = <ðaddr>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ qcom,id = <2>;
+ mdiobus = <&mdio1>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy2>;
+};
+
+&adm_dma {
+ status = "okay";
+};
projects / openwrt / staging / dangole.git / commitdiff