bus: ti-sysc: Detect timer and gpio on dra7

We need to detect timer and gpio on dra7 because of the
SYSC_QUIRK_LEGACY_IDLE flag for suspend and resume.

Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 799d69f646fc767b496070cfba3299c8d4b1f8d3..a645c6bc0c420f8a01d35c19122dac0f82b80649 100644 (file)
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -866,7 +866,7 @@ struct sysc_revision_quirk {
 
 static const struct sysc_revision_quirk sysc_revision_quirks[] = {
        /* These drivers need to be fixed to not use pm_runtime_irq_safe() */
-       SYSC_QUIRK("gpio", 0, 0, 0x10, 0x114, 0x50600801, 0xffff0fff,
+       SYSC_QUIRK("gpio", 0, 0, 0x10, 0x114, 0x50600801, 0xffff00ff,
                   SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_OPT_CLKS_IN_RESET),
        SYSC_QUIRK("mmu", 0, 0, 0x10, 0x14, 0x00000020, 0xffffffff,
                   SYSC_QUIRK_LEGACY_IDLE),
@@ -881,7 +881,9 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
        SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000015, 0xffffffff,
                   SYSC_QUIRK_LEGACY_IDLE),
        /* Some timers on omap4 and later */
-       SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffffffff,
+       SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x50002100, 0xffffffff,
+                  SYSC_QUIRK_LEGACY_IDLE),
+       SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffff00ff,
                   SYSC_QUIRK_LEGACY_IDLE),
        SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
                   SYSC_QUIRK_LEGACY_IDLE),