static DEFINE_MUTEX(ar8xxx_dev_list_lock);
static LIST_HEAD(ar8xxx_dev_list);
-static inline void
-split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
-{
- regaddr >>= 1;
- *r1 = regaddr & 0x1e;
-
- regaddr >>= 5;
- *r2 = regaddr & 0x7;
-
- regaddr >>= 3;
- *page = regaddr & 0x1ff;
-}
-
/* inspired by phy_poll_reset in drivers/net/phy/phy_device.c */
static int
ar8xxx_phy_poll_reset(struct mii_bus *bus)
ar8xxx_phy_poll_reset(bus);
}
-static u32
+u32
mii_read32(struct ar8xxx_priv *priv, int phy_id, int regnum)
{
struct mii_bus *bus = priv->mii_bus;
return (hi << 16) | lo;
}
-static void
+void
mii_write32(struct ar8xxx_priv *priv, int phy_id, int regnum, u32 val)
{
struct mii_bus *bus = priv->mii_bus;
return ret;
}
+int
+ar8xxx_sw_get_arl_table(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
+ struct mii_bus *bus = priv->mii_bus;
+ const struct ar8xxx_chip *chip = priv->chip;
+ char *buf = priv->arl_buf;
+ int i, j, k, len = 0;
+ struct arl_entry *a, *a1;
+ u32 status;
+
+ if (!chip->get_arl_entry)
+ return -EOPNOTSUPP;
+
+ mutex_lock(&priv->reg_mutex);
+ mutex_lock(&bus->mdio_lock);
+
+ chip->get_arl_entry(priv, NULL, NULL, AR8XXX_ARL_INITIALIZE);
+
+ for(i = 0; i < AR8XXX_NUM_ARL_RECORDS; ++i) {
+ a = &priv->arl_table[i];
+ duplicate:
+ chip->get_arl_entry(priv, a, &status, AR8XXX_ARL_GET_NEXT);
+
+ if (!status)
+ break;
+
+ /* avoid duplicates
+ * ARL table can include multiple valid entries
+ * per MAC, just with differing status codes
+ */
+ for (j = 0; j < i; ++j) {
+ a1 = &priv->arl_table[j];
+ if (a->port == a1->port && !memcmp(a->mac, a1->mac, sizeof(a->mac)))
+ goto duplicate;
+ }
+ }
+
+ mutex_unlock(&bus->mdio_lock);
+
+ len += snprintf(buf + len, sizeof(priv->arl_buf) - len,
+ "address resolution table\n");
+
+ if (i == AR8XXX_NUM_ARL_RECORDS)
+ len += snprintf(buf + len, sizeof(priv->arl_buf) - len,
+ "Too many entries found, displaying the first %d only!\n",
+ AR8XXX_NUM_ARL_RECORDS);
+
+ for (j = 0; j < priv->dev.ports; ++j) {
+ for (k = 0; k < i; ++k) {
+ a = &priv->arl_table[k];
+ if (a->port != j)
+ continue;
+ len += snprintf(buf + len, sizeof(priv->arl_buf) - len,
+ "Port %d: MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+ j,
+ a->mac[5], a->mac[4], a->mac[3],
+ a->mac[2], a->mac[1], a->mac[0]);
+ }
+ }
+
+ val->value.s = buf;
+ val->len = len;
+
+ mutex_unlock(&priv->reg_mutex);
+
+ return 0;
+}
+
+
static const struct switch_attr ar8xxx_sw_attr_globals[] = {
{
.type = SWITCH_TYPE_INT,
.get = ar8xxx_sw_get_mirror_source_port,
.max = AR8216_NUM_PORTS - 1
},
+ {
+ .type = SWITCH_TYPE_STRING,
+ .name = "arl_table",
+ .description = "Get ARL table",
+ .set = NULL,
+ .get = ar8xxx_sw_get_arl_table,
+ },
};
const struct switch_attr ar8xxx_sw_attr_port[2] = {
AR8XXX_VER_AR8337 = 0x13,
};
+#define AR8XXX_NUM_ARL_RECORDS 100
+
+enum arl_op {
+ AR8XXX_ARL_INITIALIZE,
+ AR8XXX_ARL_GET_NEXT
+};
+
+struct arl_entry {
+ u8 port;
+ u8 mac[6];
+};
+
struct ar8xxx_priv;
struct ar8xxx_mib_desc {
void (*vtu_load_vlan)(struct ar8xxx_priv *priv, u32 vid, u32 port_mask);
void (*phy_fixup)(struct ar8xxx_priv *priv, int phy);
void (*set_mirror_regs)(struct ar8xxx_priv *priv);
+ void (*get_arl_entry)(struct ar8xxx_priv *priv, struct arl_entry *a,
+ u32 *status, enum arl_op op);
int (*sw_hw_apply)(struct switch_dev *dev);
const struct ar8xxx_mib_desc *mib_decs;
bool initialized;
bool port4_phy;
char buf[2048];
+ struct arl_entry arl_table[AR8XXX_NUM_ARL_RECORDS];
+ char arl_buf[AR8XXX_NUM_ARL_RECORDS * 32 + 256];
bool link_up[AR8X16_MAX_PORTS];
bool init;
int monitor_port;
};
+u32
+mii_read32(struct ar8xxx_priv *priv, int phy_id, int regnum);
+void
+mii_write32(struct ar8xxx_priv *priv, int phy_id, int regnum, u32 val);
u32
ar8xxx_read(struct ar8xxx_priv *priv, int reg);
void
const struct switch_attr *attr,
struct switch_val *val);
int
+ar8xxx_sw_get_arl_table(struct switch_dev *dev,
+ const struct switch_attr *attr,
+ struct switch_val *val);
+int
ar8216_wait_bit(struct ar8xxx_priv *priv, int reg, u32 mask, u32 val);
static inline struct ar8xxx_priv *
ar8xxx_rmw(priv, reg, val, 0);
}
+static inline void
+split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
+{
+ regaddr >>= 1;
+ *r1 = regaddr & 0x1e;
+
+ regaddr >>= 5;
+ *r2 = regaddr & 0x7;
+
+ regaddr >>= 3;
+ *page = regaddr & 0x1ff;
+}
+
static inline void
wait_for_page_switch(void)
{
return 0;
}
+static void
+ar8327_wait_atu_ready(struct ar8xxx_priv *priv, u16 r2, u16 r1)
+{
+ int timeout = 20;
+
+ while (mii_read32(priv, r2, r1) & AR8327_ATU_FUNC_BUSY && --timeout)
+ udelay(10);
+
+ if (!timeout)
+ pr_err("ar8327: timeout waiting for atu to become ready\n");
+}
+
+static void ar8327_get_arl_entry(struct ar8xxx_priv *priv,
+ struct arl_entry *a, u32 *status, enum arl_op op)
+{
+ struct mii_bus *bus = priv->mii_bus;
+ u16 r2, page;
+ u16 r1_data0, r1_data1, r1_data2, r1_func;
+ u32 t, val0, val1, val2;
+ int i;
+
+ split_addr(AR8327_REG_ATU_DATA0, &r1_data0, &r2, &page);
+ r2 |= 0x10;
+
+ r1_data1 = (AR8327_REG_ATU_DATA1 >> 1) & 0x1e;
+ r1_data2 = (AR8327_REG_ATU_DATA2 >> 1) & 0x1e;
+ r1_func = (AR8327_REG_ATU_FUNC >> 1) & 0x1e;
+
+ switch (op) {
+ case AR8XXX_ARL_INITIALIZE:
+ /* all ATU registers are on the same page
+ * therefore set page only once
+ */
+ bus->write(bus, 0x18, 0, page);
+ wait_for_page_switch();
+
+ ar8327_wait_atu_ready(priv, r2, r1_func);
+
+ mii_write32(priv, r2, r1_data0, 0);
+ mii_write32(priv, r2, r1_data1, 0);
+ mii_write32(priv, r2, r1_data2, 0);
+ break;
+ case AR8XXX_ARL_GET_NEXT:
+ mii_write32(priv, r2, r1_func,
+ AR8327_ATU_FUNC_OP_GET_NEXT |
+ AR8327_ATU_FUNC_BUSY);
+ ar8327_wait_atu_ready(priv, r2, r1_func);
+
+ val0 = mii_read32(priv, r2, r1_data0);
+ val1 = mii_read32(priv, r2, r1_data1);
+ val2 = mii_read32(priv, r2, r1_data2);
+
+ *status = val2 & AR8327_ATU_STATUS;
+ if (!*status)
+ break;
+
+ i = 0;
+ t = AR8327_ATU_PORT0;
+ while (!(val1 & t) && ++i < AR8327_NUM_PORTS)
+ t <<= 1;
+
+ a->port = i;
+ a->mac[0] = (val0 & AR8327_ATU_ADDR0) >> AR8327_ATU_ADDR0_S;
+ a->mac[1] = (val0 & AR8327_ATU_ADDR1) >> AR8327_ATU_ADDR1_S;
+ a->mac[2] = (val0 & AR8327_ATU_ADDR2) >> AR8327_ATU_ADDR2_S;
+ a->mac[3] = (val0 & AR8327_ATU_ADDR3) >> AR8327_ATU_ADDR3_S;
+ a->mac[4] = (val1 & AR8327_ATU_ADDR4) >> AR8327_ATU_ADDR4_S;
+ a->mac[5] = (val1 & AR8327_ATU_ADDR5) >> AR8327_ATU_ADDR5_S;
+ break;
+ }
+}
+
static int
ar8327_sw_hw_apply(struct switch_dev *dev)
{
.get = ar8xxx_sw_get_mirror_source_port,
.max = AR8327_NUM_PORTS - 1
},
+ {
+ .type = SWITCH_TYPE_STRING,
+ .name = "arl_table",
+ .description = "Get ARL table",
+ .set = NULL,
+ .get = ar8xxx_sw_get_arl_table,
+ },
};
static const struct switch_attr ar8327_sw_attr_port[] = {
.vtu_load_vlan = ar8327_vtu_load_vlan,
.phy_fixup = ar8327_phy_fixup,
.set_mirror_regs = ar8327_set_mirror_regs,
+ .get_arl_entry = ar8327_get_arl_entry,
.sw_hw_apply = ar8327_sw_hw_apply,
.num_mibs = ARRAY_SIZE(ar8236_mibs),
.vtu_load_vlan = ar8327_vtu_load_vlan,
.phy_fixup = ar8327_phy_fixup,
.set_mirror_regs = ar8327_set_mirror_regs,
+ .get_arl_entry = ar8327_get_arl_entry,
.sw_hw_apply = ar8327_sw_hw_apply,
.num_mibs = ARRAY_SIZE(ar8236_mibs),
#define AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH 3
#define AR8327_REG_ATU_DATA0 0x600
+#define AR8327_ATU_ADDR0 BITS(0, 8)
+#define AR8327_ATU_ADDR0_S 0
+#define AR8327_ATU_ADDR1 BITS(8, 8)
+#define AR8327_ATU_ADDR1_S 8
+#define AR8327_ATU_ADDR2 BITS(16, 8)
+#define AR8327_ATU_ADDR2_S 16
+#define AR8327_ATU_ADDR3 BITS(24, 8)
+#define AR8327_ATU_ADDR3_S 24
#define AR8327_REG_ATU_DATA1 0x604
+#define AR8327_ATU_ADDR4 BITS(0, 8)
+#define AR8327_ATU_ADDR4_S 0
+#define AR8327_ATU_ADDR5 BITS(8, 8)
+#define AR8327_ATU_ADDR5_S 8
+#define AR8327_ATU_PORTS BITS(16, 7)
+#define AR8327_ATU_PORT0 BIT(16)
+#define AR8327_ATU_PORT1 BIT(17)
+#define AR8327_ATU_PORT2 BIT(18)
+#define AR8327_ATU_PORT3 BIT(19)
+#define AR8327_ATU_PORT4 BIT(20)
+#define AR8327_ATU_PORT5 BIT(21)
+#define AR8327_ATU_PORT6 BIT(22)
#define AR8327_REG_ATU_DATA2 0x608
+#define AR8327_ATU_STATUS BITS(0, 4)
#define AR8327_REG_ATU_FUNC 0x60c
#define AR8327_ATU_FUNC_OP BITS(0, 4)
projects / openwrt / staging / dangole.git / commitdiff