--- /dev/null
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=mips
+BOARD:=octeon
+BOARDNAME:=Cavium Networks Octeon
+FEATURES:=squashfs jffs2 pci usb
+CFLAGS:=-Os -pipe -march=octeon -fno-caller-saves
+MAINTAINER:=John Crispin <blogic@openwrt.org>
+
+LINUX_VERSION:=3.10
+
+include $(INCLUDE_DIR)/target.mk
+
+
+define Target/Description
+ Build firmware images for Cavium Networks Octeon-based boards.
+endef
+
+$(eval $(call BuildTarget))
--- /dev/null
+# Copyright (C) 2009 OpenWrt.org
+
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option ifname eth1
+ option type bridge
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+
+config interface wan
+ option ifname eth0
+ option proto dhcp
--- /dev/null
+CONFIG_64BIT=y
+CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
+# CONFIG_ARPD is not set
+CONFIG_BINFMT_ELF32=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLOCK_COMPAT=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_CAVIUM_CN63XXP1 is not set
+# CONFIG_CAVIUM_OCTEON_2ND_KERNEL is not set
+CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE=2
+CONFIG_CAVIUM_OCTEON_HW_FIX_UNALIGNED=y
+CONFIG_CAVIUM_OCTEON_LOCK_L2=y
+CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION=y
+CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT=y
+CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT=y
+CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY=y
+CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB=y
+CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMPAT=y
+CONFIG_COMPAT_BRK=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_CAVIUM_OCTEON=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_HUGEPAGES=y
+CONFIG_CRAMFS=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEVKMEM=y
+CONFIG_DMA_COHERENT=y
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_EXT4_FS=y
+CONFIG_FAT_FS=y
+CONFIG_FRAME_WARN=2048
+CONFIG_FS_MBCACHE=y
+# CONFIG_FW_LOADER is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIO_DEVRES=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_HOLES_IN_ZONE=y
+# CONFIG_HUGETLBFS is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OCTEON=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_KALLSYMS=y
+CONFIG_KEXEC=y
+CONFIG_LIBFDT=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MDIO_OCTEON=y
+CONFIG_MIPS=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_N32=y
+CONFIG_MIPS32_O32=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=7
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MIPS_PGD_C0_CONTEXT=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MODULES_USE_ELF_RELA=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_NR_CPUS=16
+CONFIG_NR_CPUS_DEFAULT_16=y
+CONFIG_OCTEON_ETHERNET=y
+# CONFIG_OCTEON_ILM is not set
+CONFIG_OCTEON_MGMT_ETHERNET=y
+CONFIG_OCTEON_USB=y
+CONFIG_OCTEON_WDT=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RELAY=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCSI=y
+CONFIG_SECCOMP=y
+CONFIG_SMP=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_STOP_MACHINE=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SWIOTLB=y
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_SYS_HAS_CPU_CAVIUM_OCTEON=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TREE_RCU=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_USB=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_USE_OF=y
+CONFIG_VFAT_FS=y
+# CONFIG_VLAN_8021Q is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WEAK_ORDERING=y
+CONFIG_XPS=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA32=y
+CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+config OCTEON_USB
+ tristate "Cavium Networks Octeon USB support"
+ depends on CPU_CAVIUM_OCTEON && USB
+ help
+ This driver supports USB host controller on some Cavium
+ Networks' products in the Octeon family.
+
+ To compile this driver as a module, choose M here. The module
+ will be called octeon-usb.
+
--- /dev/null
+obj-${CONFIG_OCTEON_USB} := octeon-usb.o
+octeon-usb-y := octeon-hcd.o
+octeon-usb-y += cvmx-usb.o
--- /dev/null
+This driver is functional and has been tested on EdgeRouter Lite with
+USB mass storage.
+
+TODO:
+ - kernel coding style
+ - checkpatch warnings
+ - dead code elimination
+ - device tree bindings
+ - possibly eliminate the extra "hardware abstraction layer"
+
+Contact: Aaro Koskinen <aaro.koskinen@iki.fi>
--- /dev/null
+/***********************license start***************
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+
+ * * Neither the name of Cavium Networks nor the names of
+ * its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written
+ * permission.
+
+ * This Software, including technical data, may be subject to U.S. export control
+ * laws, including the U.S. Export Administration Act and its associated
+ * regulations, and may be subject to export or import regulations in other
+ * countries.
+
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+ * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
+ * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
+ * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
+ * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+ ***********************license end**************************************/
+
+
+/**
+ * @file
+ *
+ * "cvmx-usb.c" defines a set of low level USB functions to help
+ * developers create Octeon USB drivers for various operating
+ * systems. These functions provide a generic API to the Octeon
+ * USB blocks, hiding the internal hardware specific
+ * operations.
+ *
+ * <hr>$Revision: 32636 $<hr>
+ */
+#include <linux/delay.h>
+#include <asm/octeon/cvmx.h>
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-sysinfo.h>
+#include "cvmx-usbnx-defs.h"
+#include "cvmx-usbcx-defs.h"
+#include "cvmx-usb.h"
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-helper-board.h>
+
+#define CVMX_PREFETCH0(address) CVMX_PREFETCH(address, 0)
+#define CVMX_PREFETCH128(address) CVMX_PREFETCH(address, 128)
+// a normal prefetch
+#define CVMX_PREFETCH(address, offset) CVMX_PREFETCH_PREF0(address, offset)
+// normal prefetches that use the pref instruction
+#define CVMX_PREFETCH_PREFX(X, address, offset) asm volatile ("pref %[type], %[off](%[rbase])" : : [rbase] "d" (address), [off] "I" (offset), [type] "n" (X))
+#define CVMX_PREFETCH_PREF0(address, offset) CVMX_PREFETCH_PREFX(0, address, offset)
+#define CVMX_CLZ(result, input) asm ("clz %[rd],%[rs]" : [rd] "=d" (result) : [rs] "d" (input))
+
+#define cvmx_likely likely
+#define cvmx_wait_usec udelay
+#define cvmx_unlikely unlikely
+#define cvmx_le16_to_cpu le16_to_cpu
+
+#define MAX_RETRIES 3 /* Maximum number of times to retry failed transactions */
+#define MAX_PIPES 32 /* Maximum number of pipes that can be open at once */
+#define MAX_TRANSACTIONS 256 /* Maximum number of outstanding transactions across all pipes */
+#define MAX_CHANNELS 8 /* Maximum number of hardware channels supported by the USB block */
+#define MAX_USB_ADDRESS 127 /* The highest valid USB device address */
+#define MAX_USB_ENDPOINT 15 /* The highest valid USB endpoint number */
+#define MAX_USB_HUB_PORT 15 /* The highest valid port number on a hub */
+#define MAX_TRANSFER_BYTES ((1<<19)-1) /* The low level hardware can transfer a maximum of this number of bytes in each transfer. The field is 19 bits wide */
+#define MAX_TRANSFER_PACKETS ((1<<10)-1) /* The low level hardware can transfer a maximum of this number of packets in each transfer. The field is 10 bits wide */
+
+/* These defines disable the normal read and write csr. This is so I can add
+ extra debug stuff to the usb specific version and I won't use the normal
+ version by mistake */
+#define cvmx_read_csr use_cvmx_usb_read_csr64_instead_of_cvmx_read_csr
+#define cvmx_write_csr use_cvmx_usb_write_csr64_instead_of_cvmx_write_csr
+
+typedef enum {
+ __CVMX_USB_TRANSACTION_FLAGS_IN_USE = 1<<16,
+} cvmx_usb_transaction_flags_t;
+
+enum {
+ USB_CLOCK_TYPE_REF_12,
+ USB_CLOCK_TYPE_REF_24,
+ USB_CLOCK_TYPE_REF_48,
+ USB_CLOCK_TYPE_CRYSTAL_12,
+};
+
+/**
+ * Logical transactions may take numerous low level
+ * transactions, especially when splits are concerned. This
+ * enum represents all of the possible stages a transaction can
+ * be in. Note that split completes are always even. This is so
+ * the NAK handler can backup to the previous low level
+ * transaction with a simple clearing of bit 0.
+ */
+typedef enum {
+ CVMX_USB_STAGE_NON_CONTROL,
+ CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE,
+ CVMX_USB_STAGE_SETUP,
+ CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE,
+ CVMX_USB_STAGE_DATA,
+ CVMX_USB_STAGE_DATA_SPLIT_COMPLETE,
+ CVMX_USB_STAGE_STATUS,
+ CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE,
+} cvmx_usb_stage_t;
+
+/**
+ * This structure describes each pending USB transaction
+ * regardless of type. These are linked together to form a list
+ * of pending requests for a pipe.
+ */
+typedef struct cvmx_usb_transaction {
+ struct cvmx_usb_transaction *prev; /**< Transaction before this one in the pipe */
+ struct cvmx_usb_transaction *next; /**< Transaction after this one in the pipe */
+ cvmx_usb_transfer_t type; /**< Type of transaction, duplicated of the pipe */
+ cvmx_usb_transaction_flags_t flags; /**< State flags for this transaction */
+ uint64_t buffer; /**< User's physical buffer address to read/write */
+ int buffer_length; /**< Size of the user's buffer in bytes */
+ uint64_t control_header; /**< For control transactions, physical address of the 8 byte standard header */
+ int iso_start_frame; /**< For ISO transactions, the starting frame number */
+ int iso_number_packets; /**< For ISO transactions, the number of packets in the request */
+ cvmx_usb_iso_packet_t *iso_packets; /**< For ISO transactions, the sub packets in the request */
+ int xfersize;
+ int pktcnt;
+ int retries;
+ int actual_bytes; /**< Actual bytes transfer for this transaction */
+ cvmx_usb_stage_t stage; /**< For control transactions, the current stage */
+ cvmx_usb_callback_func_t callback; /**< User's callback function when complete */
+ void *callback_data; /**< User's data */
+} cvmx_usb_transaction_t;
+
+/**
+ * A pipe represents a virtual connection between Octeon and some
+ * USB device. It contains a list of pending request to the device.
+ */
+typedef struct cvmx_usb_pipe {
+ struct cvmx_usb_pipe *prev; /**< Pipe before this one in the list */
+ struct cvmx_usb_pipe *next; /**< Pipe after this one in the list */
+ cvmx_usb_transaction_t *head; /**< The first pending transaction */
+ cvmx_usb_transaction_t *tail; /**< The last pending transaction */
+ uint64_t interval; /**< For periodic pipes, the interval between packets in frames */
+ uint64_t next_tx_frame; /**< The next frame this pipe is allowed to transmit on */
+ cvmx_usb_pipe_flags_t flags; /**< State flags for this pipe */
+ cvmx_usb_speed_t device_speed; /**< Speed of device connected to this pipe */
+ cvmx_usb_transfer_t transfer_type; /**< Type of transaction supported by this pipe */
+ cvmx_usb_direction_t transfer_dir; /**< IN or OUT. Ignored for Control */
+ int multi_count; /**< Max packet in a row for the device */
+ uint16_t max_packet; /**< The device's maximum packet size in bytes */
+ uint8_t device_addr; /**< USB device address at other end of pipe */
+ uint8_t endpoint_num; /**< USB endpoint number at other end of pipe */
+ uint8_t hub_device_addr; /**< Hub address this device is connected to */
+ uint8_t hub_port; /**< Hub port this device is connected to */
+ uint8_t pid_toggle; /**< This toggles between 0/1 on every packet send to track the data pid needed */
+ uint8_t channel; /**< Hardware DMA channel for this pipe */
+ int8_t split_sc_frame; /**< The low order bits of the frame number the split complete should be sent on */
+} cvmx_usb_pipe_t;
+
+typedef struct {
+ cvmx_usb_pipe_t *head; /**< Head of the list, or NULL if empty */
+ cvmx_usb_pipe_t *tail; /**< Tail if the list, or NULL if empty */
+} cvmx_usb_pipe_list_t;
+
+typedef struct {
+ struct {
+ int channel;
+ int size;
+ uint64_t address;
+ } entry[MAX_CHANNELS+1];
+ int head;
+ int tail;
+} cvmx_usb_tx_fifo_t;
+
+/**
+ * The state of the USB block is stored in this structure
+ */
+typedef struct {
+ int init_flags; /**< Flags passed to initialize */
+ int index; /**< Which USB block this is for */
+ int idle_hardware_channels; /**< Bit set for every idle hardware channel */
+ cvmx_usbcx_hprt_t usbcx_hprt; /**< Stored port status so we don't need to read a CSR to determine splits */
+ cvmx_usb_pipe_t *pipe_for_channel[MAX_CHANNELS]; /**< Map channels to pipes */
+ cvmx_usb_transaction_t *free_transaction_head; /**< List of free transactions head */
+ cvmx_usb_transaction_t *free_transaction_tail; /**< List of free transactions tail */
+ cvmx_usb_pipe_t pipe[MAX_PIPES]; /**< Storage for pipes */
+ cvmx_usb_transaction_t transaction[MAX_TRANSACTIONS]; /**< Storage for transactions */
+ cvmx_usb_callback_func_t callback[__CVMX_USB_CALLBACK_END]; /**< User global callbacks */
+ void *callback_data[__CVMX_USB_CALLBACK_END]; /**< User data for each callback */
+ int indent; /**< Used by debug output to indent functions */
+ cvmx_usb_port_status_t port_status; /**< Last port status used for change notification */
+ cvmx_usb_pipe_list_t free_pipes; /**< List of all pipes that are currently closed */
+ cvmx_usb_pipe_list_t idle_pipes; /**< List of open pipes that have no transactions */
+ cvmx_usb_pipe_list_t active_pipes[4]; /**< Active pipes indexed by transfer type */
+ uint64_t frame_number; /**< Increments every SOF interrupt for time keeping */
+ cvmx_usb_transaction_t *active_split; /**< Points to the current active split, or NULL */
+ cvmx_usb_tx_fifo_t periodic;
+ cvmx_usb_tx_fifo_t nonperiodic;
+} cvmx_usb_internal_state_t;
+
+/* This macro logs out whenever a function is called if debugging is on */
+#define CVMX_USB_LOG_CALLED() \
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS)) \
+ cvmx_dprintf("%*s%s: called\n", 2*usb->indent++, "", __FUNCTION__);
+
+/* This macro logs out each function parameter if debugging is on */
+#define CVMX_USB_LOG_PARAM(format, param) \
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS)) \
+ cvmx_dprintf("%*s%s: param %s = " format "\n", 2*usb->indent, "", __FUNCTION__, #param, param);
+
+/* This macro logs out when a function returns a value */
+#define CVMX_USB_RETURN(v) \
+ do { \
+ typeof(v) r = v; \
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS)) \
+ cvmx_dprintf("%*s%s: returned %s(%d)\n", 2*--usb->indent, "", __FUNCTION__, #v, r); \
+ return r; \
+ } while (0);
+
+/* This macro logs out when a function doesn't return a value */
+#define CVMX_USB_RETURN_NOTHING() \
+ do { \
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS)) \
+ cvmx_dprintf("%*s%s: returned\n", 2*--usb->indent, "", __FUNCTION__); \
+ return; \
+ } while (0);
+
+/* This macro spins on a field waiting for it to reach a value */
+#define CVMX_WAIT_FOR_FIELD32(address, type, field, op, value, timeout_usec)\
+ ({int result; \
+ do { \
+ uint64_t done = cvmx_get_cycle() + (uint64_t)timeout_usec * \
+ octeon_get_clock_rate() / 1000000; \
+ type c; \
+ while (1) \
+ { \
+ c.u32 = __cvmx_usb_read_csr32(usb, address); \
+ if (c.s.field op (value)) { \
+ result = 0; \
+ break; \
+ } else if (cvmx_get_cycle() > done) { \
+ result = -1; \
+ break; \
+ } else \
+ cvmx_wait(100); \
+ } \
+ } while (0); \
+ result;})
+
+/* This macro logically sets a single field in a CSR. It does the sequence
+ read, modify, and write */
+#define USB_SET_FIELD32(address, type, field, value)\
+ do { \
+ type c; \
+ c.u32 = __cvmx_usb_read_csr32(usb, address);\
+ c.s.field = value; \
+ __cvmx_usb_write_csr32(usb, address, c.u32);\
+ } while (0)
+
+/* Returns the IO address to push/pop stuff data from the FIFOs */
+#define USB_FIFO_ADDRESS(channel, usb_index) (CVMX_USBCX_GOTGCTL(usb_index) + ((channel)+1)*0x1000)
+
+static int octeon_usb_get_clock_type(void)
+{
+ switch (cvmx_sysinfo_get()->board_type) {
+ case CVMX_BOARD_TYPE_BBGW_REF:
+ case CVMX_BOARD_TYPE_LANAI2_A:
+ case CVMX_BOARD_TYPE_LANAI2_U:
+ case CVMX_BOARD_TYPE_LANAI2_G:
+ return USB_CLOCK_TYPE_CRYSTAL_12;
+ }
+
+ /* FIXME: This should use CVMX_BOARD_TYPE_UBNT_E100 */
+ if (OCTEON_IS_MODEL(OCTEON_CN50XX) &&
+ cvmx_sysinfo_get()->board_type == 20002)
+ return USB_CLOCK_TYPE_CRYSTAL_12;
+
+ return USB_CLOCK_TYPE_REF_48;
+}
+
+/**
+ * @INTERNAL
+ * Read a USB 32bit CSR. It performs the necessary address swizzle
+ * for 32bit CSRs and logs the value in a readable format if
+ * debugging is on.
+ *
+ * @param usb USB block this access is for
+ * @param address 64bit address to read
+ *
+ * @return Result of the read
+ */
+static inline uint32_t __cvmx_usb_read_csr32(cvmx_usb_internal_state_t *usb,
+ uint64_t address)
+{
+ uint32_t result = cvmx_read64_uint32(address ^ 4);
+ return result;
+}
+
+
+/**
+ * @INTERNAL
+ * Write a USB 32bit CSR. It performs the necessary address
+ * swizzle for 32bit CSRs and logs the value in a readable format
+ * if debugging is on.
+ *
+ * @param usb USB block this access is for
+ * @param address 64bit address to write
+ * @param value Value to write
+ */
+static inline void __cvmx_usb_write_csr32(cvmx_usb_internal_state_t *usb,
+ uint64_t address, uint32_t value)
+{
+ cvmx_write64_uint32(address ^ 4, value);
+ cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
+}
+
+
+/**
+ * @INTERNAL
+ * Read a USB 64bit CSR. It logs the value in a readable format if
+ * debugging is on.
+ *
+ * @param usb USB block this access is for
+ * @param address 64bit address to read
+ *
+ * @return Result of the read
+ */
+static inline uint64_t __cvmx_usb_read_csr64(cvmx_usb_internal_state_t *usb,
+ uint64_t address)
+{
+ uint64_t result = cvmx_read64_uint64(address);
+ return result;
+}
+
+
+/**
+ * @INTERNAL
+ * Write a USB 64bit CSR. It logs the value in a readable format
+ * if debugging is on.
+ *
+ * @param usb USB block this access is for
+ * @param address 64bit address to write
+ * @param value Value to write
+ */
+static inline void __cvmx_usb_write_csr64(cvmx_usb_internal_state_t *usb,
+ uint64_t address, uint64_t value)
+{
+ cvmx_write64_uint64(address, value);
+}
+
+
+/**
+ * @INTERNAL
+ * Utility function to convert complete codes into strings
+ *
+ * @param complete_code
+ * Code to convert
+ *
+ * @return Human readable string
+ */
+static const char *__cvmx_usb_complete_to_string(cvmx_usb_complete_t complete_code)
+{
+ switch (complete_code)
+ {
+ case CVMX_USB_COMPLETE_SUCCESS: return "SUCCESS";
+ case CVMX_USB_COMPLETE_SHORT: return "SHORT";
+ case CVMX_USB_COMPLETE_CANCEL: return "CANCEL";
+ case CVMX_USB_COMPLETE_ERROR: return "ERROR";
+ case CVMX_USB_COMPLETE_STALL: return "STALL";
+ case CVMX_USB_COMPLETE_XACTERR: return "XACTERR";
+ case CVMX_USB_COMPLETE_DATATGLERR: return "DATATGLERR";
+ case CVMX_USB_COMPLETE_BABBLEERR: return "BABBLEERR";
+ case CVMX_USB_COMPLETE_FRAMEERR: return "FRAMEERR";
+ }
+ return "Update __cvmx_usb_complete_to_string";
+}
+
+
+/**
+ * @INTERNAL
+ * Return non zero if this pipe connects to a non HIGH speed
+ * device through a high speed hub.
+ *
+ * @param usb USB block this access is for
+ * @param pipe Pipe to check
+ *
+ * @return Non zero if we need to do split transactions
+ */
+static inline int __cvmx_usb_pipe_needs_split(cvmx_usb_internal_state_t *usb, cvmx_usb_pipe_t *pipe)
+{
+ return ((pipe->device_speed != CVMX_USB_SPEED_HIGH) && (usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_HIGH));
+}
+
+
+/**
+ * @INTERNAL
+ * Trivial utility function to return the correct PID for a pipe
+ *
+ * @param pipe pipe to check
+ *
+ * @return PID for pipe
+ */
+static inline int __cvmx_usb_get_data_pid(cvmx_usb_pipe_t *pipe)
+{
+ if (pipe->pid_toggle)
+ return 2; /* Data1 */
+ else
+ return 0; /* Data0 */
+}
+
+
+/**
+ * Return the number of USB ports supported by this Octeon
+ * chip. If the chip doesn't support USB, or is not supported
+ * by this API, a zero will be returned. Most Octeon chips
+ * support one usb port, but some support two ports.
+ * cvmx_usb_initialize() must be called on independent
+ * cvmx_usb_state_t structures.
+ *
+ * @return Number of port, zero if usb isn't supported
+ */
+int cvmx_usb_get_num_ports(void)
+{
+ int arch_ports = 0;
+
+ if (OCTEON_IS_MODEL(OCTEON_CN56XX))
+ arch_ports = 1;
+ else if (OCTEON_IS_MODEL(OCTEON_CN52XX))
+ arch_ports = 2;
+ else if (OCTEON_IS_MODEL(OCTEON_CN50XX))
+ arch_ports = 1;
+ else if (OCTEON_IS_MODEL(OCTEON_CN31XX))
+ arch_ports = 1;
+ else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
+ arch_ports = 1;
+ else
+ arch_ports = 0;
+
+ return arch_ports;
+}
+
+
+/**
+ * @INTERNAL
+ * Allocate a usb transaction for use
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return Transaction or NULL
+ */
+static inline cvmx_usb_transaction_t *__cvmx_usb_alloc_transaction(cvmx_usb_internal_state_t *usb)
+{
+ cvmx_usb_transaction_t *t;
+ t = usb->free_transaction_head;
+ if (t) {
+ usb->free_transaction_head = t->next;
+ if (!usb->free_transaction_head)
+ usb->free_transaction_tail = NULL;
+ }
+ else if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
+ cvmx_dprintf("%s: Failed to allocate a transaction\n", __FUNCTION__);
+ if (t) {
+ memset(t, 0, sizeof(*t));
+ t->flags = __CVMX_USB_TRANSACTION_FLAGS_IN_USE;
+ }
+ return t;
+}
+
+
+/**
+ * @INTERNAL
+ * Free a usb transaction
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param transaction
+ * Transaction to free
+ */
+static inline void __cvmx_usb_free_transaction(cvmx_usb_internal_state_t *usb,
+ cvmx_usb_transaction_t *transaction)
+{
+ transaction->flags = 0;
+ transaction->prev = NULL;
+ transaction->next = NULL;
+ if (usb->free_transaction_tail)
+ usb->free_transaction_tail->next = transaction;
+ else
+ usb->free_transaction_head = transaction;
+ usb->free_transaction_tail = transaction;
+}
+
+
+/**
+ * @INTERNAL
+ * Add a pipe to the tail of a list
+ * @param list List to add pipe to
+ * @param pipe Pipe to add
+ */
+static inline void __cvmx_usb_append_pipe(cvmx_usb_pipe_list_t *list, cvmx_usb_pipe_t *pipe)
+{
+ pipe->next = NULL;
+ pipe->prev = list->tail;
+ if (list->tail)
+ list->tail->next = pipe;
+ else
+ list->head = pipe;
+ list->tail = pipe;
+}
+
+
+/**
+ * @INTERNAL
+ * Remove a pipe from a list
+ * @param list List to remove pipe from
+ * @param pipe Pipe to remove
+ */
+static inline void __cvmx_usb_remove_pipe(cvmx_usb_pipe_list_t *list, cvmx_usb_pipe_t *pipe)
+{
+ if (list->head == pipe) {
+ list->head = pipe->next;
+ pipe->next = NULL;
+ if (list->head)
+ list->head->prev = NULL;
+ else
+ list->tail = NULL;
+ }
+ else if (list->tail == pipe) {
+ list->tail = pipe->prev;
+ list->tail->next = NULL;
+ pipe->prev = NULL;
+ }
+ else {
+ pipe->prev->next = pipe->next;
+ pipe->next->prev = pipe->prev;
+ pipe->prev = NULL;
+ pipe->next = NULL;
+ }
+}
+
+
+/**
+ * Initialize a USB port for use. This must be called before any
+ * other access to the Octeon USB port is made. The port starts
+ * off in the disabled state.
+ *
+ * @param state Pointer to an empty cvmx_usb_state_t structure
+ * that will be populated by the initialize call.
+ * This structure is then passed to all other USB
+ * functions.
+ * @param usb_port_number
+ * Which Octeon USB port to initialize.
+ * @param flags Flags to control hardware initialization. See
+ * cvmx_usb_initialize_flags_t for the flag
+ * definitions. Some flags are mandatory.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_initialize(cvmx_usb_state_t *state,
+ int usb_port_number,
+ cvmx_usb_initialize_flags_t flags)
+{
+ cvmx_usbnx_clk_ctl_t usbn_clk_ctl;
+ cvmx_usbnx_usbp_ctl_status_t usbn_usbp_ctl_status;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ usb->init_flags = flags;
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", usb_port_number);
+ CVMX_USB_LOG_PARAM("0x%x", flags);
+
+ /* Make sure that state is large enough to store the internal state */
+ if (sizeof(*state) < sizeof(*usb))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ /* At first allow 0-1 for the usb port number */
+ if ((usb_port_number < 0) || (usb_port_number > 1))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ /* For all chips except 52XX there is only one port */
+ if (!OCTEON_IS_MODEL(OCTEON_CN52XX) && (usb_port_number > 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ /* Try to determine clock type automatically */
+ if ((flags & (CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI |
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND)) == 0) {
+ if (octeon_usb_get_clock_type() == USB_CLOCK_TYPE_CRYSTAL_12)
+ flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI; /* Only 12 MHZ crystals are supported */
+ else
+ flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
+ }
+
+ if (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) {
+ /* Check for auto ref clock frequency */
+ if (!(flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK))
+ switch (octeon_usb_get_clock_type()) {
+ case USB_CLOCK_TYPE_REF_12:
+ flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
+ break;
+ case USB_CLOCK_TYPE_REF_24:
+ flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
+ break;
+ case USB_CLOCK_TYPE_REF_48:
+ flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
+ break;
+ default:
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ break;
+ }
+ }
+
+ memset(usb, 0, sizeof(usb));
+ usb->init_flags = flags;
+
+ /* Initialize the USB state structure */
+ {
+ int i;
+ usb->index = usb_port_number;
+
+ /* Initialize the transaction double linked list */
+ usb->free_transaction_head = NULL;
+ usb->free_transaction_tail = NULL;
+ for (i=0; i<MAX_TRANSACTIONS; i++)
+ __cvmx_usb_free_transaction(usb, usb->transaction + i);
+ for (i=0; i<MAX_PIPES; i++)
+ __cvmx_usb_append_pipe(&usb->free_pipes, usb->pipe + i);
+ }
+
+ /* Power On Reset and PHY Initialization */
+
+ /* 1. Wait for DCOK to assert (nothing to do) */
+ /* 2a. Write USBN0/1_CLK_CTL[POR] = 1 and
+ USBN0/1_CLK_CTL[HRST,PRST,HCLK_RST] = 0 */
+ usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index));
+ usbn_clk_ctl.s.por = 1;
+ usbn_clk_ctl.s.hrst = 0;
+ usbn_clk_ctl.s.prst = 0;
+ usbn_clk_ctl.s.hclk_rst = 0;
+ usbn_clk_ctl.s.enable = 0;
+ /* 2b. Select the USB reference clock/crystal parameters by writing
+ appropriate values to USBN0/1_CLK_CTL[P_C_SEL, P_RTYPE, P_COM_ON] */
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) {
+ /* The USB port uses 12/24/48MHz 2.5V board clock
+ source at USB_XO. USB_XI should be tied to GND.
+ Most Octeon evaluation boards require this setting */
+ if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
+ usbn_clk_ctl.cn31xx.p_rclk = 1; /* From CN31XX,CN30XX manual */
+ usbn_clk_ctl.cn31xx.p_xenbn = 0;
+ }
+ else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX))
+ usbn_clk_ctl.cn56xx.p_rtype = 2; /* From CN56XX,CN50XX manual */
+ else
+ usbn_clk_ctl.cn52xx.p_rtype = 1; /* From CN52XX manual */
+
+ switch (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK) {
+ case CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ:
+ usbn_clk_ctl.s.p_c_sel = 0;
+ break;
+ case CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ:
+ usbn_clk_ctl.s.p_c_sel = 1;
+ break;
+ case CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ:
+ usbn_clk_ctl.s.p_c_sel = 2;
+ break;
+ }
+ }
+ else {
+ /* The USB port uses a 12MHz crystal as clock source
+ at USB_XO and USB_XI */
+ if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
+ usbn_clk_ctl.cn31xx.p_rclk = 1; /* From CN31XX,CN30XX manual */
+ usbn_clk_ctl.cn31xx.p_xenbn = 1;
+ }
+ else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX))
+ usbn_clk_ctl.cn56xx.p_rtype = 0; /* From CN56XX,CN50XX manual */
+ else
+ usbn_clk_ctl.cn52xx.p_rtype = 0; /* From CN52XX manual */
+
+ usbn_clk_ctl.s.p_c_sel = 0;
+ }
+ /* 2c. Select the HCLK via writing USBN0/1_CLK_CTL[DIVIDE, DIVIDE2] and
+ setting USBN0/1_CLK_CTL[ENABLE] = 1. Divide the core clock down such
+ that USB is as close as possible to 125Mhz */
+ {
+ int divisor = (octeon_get_clock_rate()+125000000-1)/125000000;
+ if (divisor < 4) /* Lower than 4 doesn't seem to work properly */
+ divisor = 4;
+ usbn_clk_ctl.s.divide = divisor;
+ usbn_clk_ctl.s.divide2 = 0;
+ }
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ /* 2d. Write USBN0/1_CLK_CTL[HCLK_RST] = 1 */
+ usbn_clk_ctl.s.hclk_rst = 1;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ /* 2e. Wait 64 core-clock cycles for HCLK to stabilize */
+ cvmx_wait(64);
+ /* 3. Program the power-on reset field in the USBN clock-control register:
+ USBN_CLK_CTL[POR] = 0 */
+ usbn_clk_ctl.s.por = 0;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ /* 4. Wait 1 ms for PHY clock to start */
+ cvmx_wait_usec(1000);
+ /* 5. Program the Reset input from automatic test equipment field in the
+ USBP control and status register: USBN_USBP_CTL_STATUS[ATE_RESET] = 1 */
+ usbn_usbp_ctl_status.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index));
+ usbn_usbp_ctl_status.s.ate_reset = 1;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
+ usbn_usbp_ctl_status.u64);
+ /* 6. Wait 10 cycles */
+ cvmx_wait(10);
+ /* 7. Clear ATE_RESET field in the USBN clock-control register:
+ USBN_USBP_CTL_STATUS[ATE_RESET] = 0 */
+ usbn_usbp_ctl_status.s.ate_reset = 0;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
+ usbn_usbp_ctl_status.u64);
+ /* 8. Program the PHY reset field in the USBN clock-control register:
+ USBN_CLK_CTL[PRST] = 1 */
+ usbn_clk_ctl.s.prst = 1;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ /* 9. Program the USBP control and status register to select host or
+ device mode. USBN_USBP_CTL_STATUS[HST_MODE] = 0 for host, = 1 for
+ device */
+ usbn_usbp_ctl_status.s.hst_mode = 0;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_USBP_CTL_STATUS(usb->index),
+ usbn_usbp_ctl_status.u64);
+ /* 10. Wait 1 us */
+ cvmx_wait_usec(1);
+ /* 11. Program the hreset_n field in the USBN clock-control register:
+ USBN_CLK_CTL[HRST] = 1 */
+ usbn_clk_ctl.s.hrst = 1;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ /* 12. Proceed to USB core initialization */
+ usbn_clk_ctl.s.enable = 1;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ cvmx_wait_usec(1);
+
+ /* USB Core Initialization */
+
+ /* 1. Read USBC_GHWCFG1, USBC_GHWCFG2, USBC_GHWCFG3, USBC_GHWCFG4 to
+ determine USB core configuration parameters. */
+ /* Nothing needed */
+ /* 2. Program the following fields in the global AHB configuration
+ register (USBC_GAHBCFG)
+ DMA mode, USBC_GAHBCFG[DMAEn]: 1 = DMA mode, 0 = slave mode
+ Burst length, USBC_GAHBCFG[HBSTLEN] = 0
+ Nonperiodic TxFIFO empty level (slave mode only),
+ USBC_GAHBCFG[NPTXFEMPLVL]
+ Periodic TxFIFO empty level (slave mode only),
+ USBC_GAHBCFG[PTXFEMPLVL]
+ Global interrupt mask, USBC_GAHBCFG[GLBLINTRMSK] = 1 */
+ {
+ cvmx_usbcx_gahbcfg_t usbcx_gahbcfg;
+ /* Due to an errata, CN31XX doesn't support DMA */
+ if (OCTEON_IS_MODEL(OCTEON_CN31XX))
+ usb->init_flags |= CVMX_USB_INITIALIZE_FLAGS_NO_DMA;
+ usbcx_gahbcfg.u32 = 0;
+ usbcx_gahbcfg.s.dmaen = !(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA);
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+ usb->idle_hardware_channels = 0x1; /* Only use one channel with non DMA */
+ else if (OCTEON_IS_MODEL(OCTEON_CN5XXX))
+ usb->idle_hardware_channels = 0xf7; /* CN5XXX have an errata with channel 3 */
+ else
+ usb->idle_hardware_channels = 0xff;
+ usbcx_gahbcfg.s.hbstlen = 0;
+ usbcx_gahbcfg.s.nptxfemplvl = 1;
+ usbcx_gahbcfg.s.ptxfemplvl = 1;
+ usbcx_gahbcfg.s.glblintrmsk = 1;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_GAHBCFG(usb->index),
+ usbcx_gahbcfg.u32);
+ }
+ /* 3. Program the following fields in USBC_GUSBCFG register.
+ HS/FS timeout calibration, USBC_GUSBCFG[TOUTCAL] = 0
+ ULPI DDR select, USBC_GUSBCFG[DDRSEL] = 0
+ USB turnaround time, USBC_GUSBCFG[USBTRDTIM] = 0x5
+ PHY low-power clock select, USBC_GUSBCFG[PHYLPWRCLKSEL] = 0 */
+ {
+ cvmx_usbcx_gusbcfg_t usbcx_gusbcfg;
+ usbcx_gusbcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index));
+ usbcx_gusbcfg.s.toutcal = 0;
+ usbcx_gusbcfg.s.ddrsel = 0;
+ usbcx_gusbcfg.s.usbtrdtim = 0x5;
+ usbcx_gusbcfg.s.phylpwrclksel = 0;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index),
+ usbcx_gusbcfg.u32);
+ }
+ /* 4. The software must unmask the following bits in the USBC_GINTMSK
+ register.
+ OTG interrupt mask, USBC_GINTMSK[OTGINTMSK] = 1
+ Mode mismatch interrupt mask, USBC_GINTMSK[MODEMISMSK] = 1 */
+ {
+ cvmx_usbcx_gintmsk_t usbcx_gintmsk;
+ int channel;
+
+ usbcx_gintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTMSK(usb->index));
+ usbcx_gintmsk.s.otgintmsk = 1;
+ usbcx_gintmsk.s.modemismsk = 1;
+ usbcx_gintmsk.s.hchintmsk = 1;
+ usbcx_gintmsk.s.sofmsk = 0;
+ /* We need RX FIFO interrupts if we don't have DMA */
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+ usbcx_gintmsk.s.rxflvlmsk = 1;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTMSK(usb->index),
+ usbcx_gintmsk.u32);
+
+ /* Disable all channel interrupts. We'll enable them per channel later */
+ for (channel=0; channel<8; channel++)
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0);
+ }
+
+ {
+ /* Host Port Initialization */
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
+ cvmx_dprintf("%s: USB%d is in host mode\n", __FUNCTION__, usb->index);
+
+ /* 1. Program the host-port interrupt-mask field to unmask,
+ USBC_GINTMSK[PRTINT] = 1 */
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t,
+ prtintmsk, 1);
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t,
+ disconnintmsk, 1);
+ /* 2. Program the USBC_HCFG register to select full-speed host or
+ high-speed host. */
+ {
+ cvmx_usbcx_hcfg_t usbcx_hcfg;
+ usbcx_hcfg.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCFG(usb->index));
+ usbcx_hcfg.s.fslssupp = 0;
+ usbcx_hcfg.s.fslspclksel = 0;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCFG(usb->index), usbcx_hcfg.u32);
+ }
+ /* 3. Program the port power bit to drive VBUS on the USB,
+ USBC_HPRT[PRTPWR] = 1 */
+ USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtpwr, 1);
+
+ /* Steps 4-15 from the manual are done later in the port enable */
+ }
+
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Shutdown a USB port after a call to cvmx_usb_initialize().
+ * The port should be disabled with all pipes closed when this
+ * function is called.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_shutdown(cvmx_usb_state_t *state)
+{
+ cvmx_usbnx_clk_ctl_t usbn_clk_ctl;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+
+ /* Make sure all pipes are closed */
+ if (usb->idle_pipes.head ||
+ usb->active_pipes[CVMX_USB_TRANSFER_ISOCHRONOUS].head ||
+ usb->active_pipes[CVMX_USB_TRANSFER_INTERRUPT].head ||
+ usb->active_pipes[CVMX_USB_TRANSFER_CONTROL].head ||
+ usb->active_pipes[CVMX_USB_TRANSFER_BULK].head)
+ CVMX_USB_RETURN(CVMX_USB_BUSY);
+
+ /* Disable the clocks and put them in power on reset */
+ usbn_clk_ctl.u64 = __cvmx_usb_read_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index));
+ usbn_clk_ctl.s.enable = 1;
+ usbn_clk_ctl.s.por = 1;
+ usbn_clk_ctl.s.hclk_rst = 1;
+ usbn_clk_ctl.s.prst = 0;
+ usbn_clk_ctl.s.hrst = 0;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_CLK_CTL(usb->index),
+ usbn_clk_ctl.u64);
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Enable a USB port. After this call succeeds, the USB port is
+ * online and servicing requests.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_enable(cvmx_usb_state_t *state)
+{
+ cvmx_usbcx_ghwcfg3_t usbcx_ghwcfg3;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+
+ usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+
+ /* If the port is already enabled the just return. We don't need to do
+ anything */
+ if (usb->usbcx_hprt.s.prtena)
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+
+ /* If there is nothing plugged into the port then fail immediately */
+ if (!usb->usbcx_hprt.s.prtconnsts) {
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
+ cvmx_dprintf("%s: USB%d Nothing plugged into the port\n", __FUNCTION__, usb->index);
+ CVMX_USB_RETURN(CVMX_USB_TIMEOUT);
+ }
+
+ /* Program the port reset bit to start the reset process */
+ USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtrst, 1);
+
+ /* Wait at least 50ms (high speed), or 10ms (full speed) for the reset
+ process to complete. */
+ cvmx_wait_usec(50000);
+
+ /* Program the port reset bit to 0, USBC_HPRT[PRTRST] = 0 */
+ USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtrst, 0);
+
+ /* Wait for the USBC_HPRT[PRTENA]. */
+ if (CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t,
+ prtena, ==, 1, 100000)) {
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
+ cvmx_dprintf("%s: Timeout waiting for the port to finish reset\n",
+ __FUNCTION__);
+ CVMX_USB_RETURN(CVMX_USB_TIMEOUT);
+ }
+
+ /* Read the port speed field to get the enumerated speed, USBC_HPRT[PRTSPD]. */
+ usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
+ cvmx_dprintf("%s: USB%d is in %s speed mode\n", __FUNCTION__, usb->index,
+ (usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_HIGH) ? "high" :
+ (usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_FULL) ? "full" :
+ "low");
+
+ usbcx_ghwcfg3.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GHWCFG3(usb->index));
+
+ /* 13. Program the USBC_GRXFSIZ register to select the size of the receive
+ FIFO (25%). */
+ USB_SET_FIELD32(CVMX_USBCX_GRXFSIZ(usb->index), cvmx_usbcx_grxfsiz_t,
+ rxfdep, usbcx_ghwcfg3.s.dfifodepth / 4);
+ /* 14. Program the USBC_GNPTXFSIZ register to select the size and the
+ start address of the non- periodic transmit FIFO for nonperiodic
+ transactions (50%). */
+ {
+ cvmx_usbcx_gnptxfsiz_t siz;
+ siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index));
+ siz.s.nptxfdep = usbcx_ghwcfg3.s.dfifodepth / 2;
+ siz.s.nptxfstaddr = usbcx_ghwcfg3.s.dfifodepth / 4;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index), siz.u32);
+ }
+ /* 15. Program the USBC_HPTXFSIZ register to select the size and start
+ address of the periodic transmit FIFO for periodic transactions (25%). */
+ {
+ cvmx_usbcx_hptxfsiz_t siz;
+ siz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index));
+ siz.s.ptxfsize = usbcx_ghwcfg3.s.dfifodepth / 4;
+ siz.s.ptxfstaddr = 3 * usbcx_ghwcfg3.s.dfifodepth / 4;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index), siz.u32);
+ }
+ /* Flush all FIFOs */
+ USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, txfnum, 0x10);
+ USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, txfflsh, 1);
+ CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t,
+ txfflsh, ==, 0, 100);
+ USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t, rxfflsh, 1);
+ CVMX_WAIT_FOR_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), cvmx_usbcx_grstctl_t,
+ rxfflsh, ==, 0, 100);
+
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Disable a USB port. After this call the USB port will not
+ * generate data transfers and will not generate events.
+ * Transactions in process will fail and call their
+ * associated callbacks.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_disable(cvmx_usb_state_t *state)
+{
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+
+ /* Disable the port */
+ USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt_t, prtena, 1);
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Get the current state of the USB port. Use this call to
+ * determine if the usb port has anything connected, is enabled,
+ * or has some sort of error condition. The return value of this
+ * call has "changed" bits to signal of the value of some fields
+ * have changed between calls. These "changed" fields are based
+ * on the last call to cvmx_usb_set_status(). In order to clear
+ * them, you must update the status through cvmx_usb_set_status().
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return Port status information
+ */
+cvmx_usb_port_status_t cvmx_usb_get_status(cvmx_usb_state_t *state)
+{
+ cvmx_usbcx_hprt_t usbc_hprt;
+ cvmx_usb_port_status_t result;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ memset(&result, 0, sizeof(result));
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+
+ usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+ result.port_enabled = usbc_hprt.s.prtena;
+ result.port_over_current = usbc_hprt.s.prtovrcurract;
+ result.port_powered = usbc_hprt.s.prtpwr;
+ result.port_speed = usbc_hprt.s.prtspd;
+ result.connected = usbc_hprt.s.prtconnsts;
+ result.connect_change = (result.connected != usb->port_status.connected);
+
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS))
+ cvmx_dprintf("%*s%s: returned port enabled=%d, over_current=%d, powered=%d, speed=%d, connected=%d, connect_change=%d\n",
+ 2*(--usb->indent), "", __FUNCTION__,
+ result.port_enabled,
+ result.port_over_current,
+ result.port_powered,
+ result.port_speed,
+ result.connected,
+ result.connect_change);
+ return result;
+}
+
+
+/**
+ * Set the current state of the USB port. The status is used as
+ * a reference for the "changed" bits returned by
+ * cvmx_usb_get_status(). Other than serving as a reference, the
+ * status passed to this function is not used. No fields can be
+ * changed through this call.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param port_status
+ * Port status to set, most like returned by cvmx_usb_get_status()
+ */
+void cvmx_usb_set_status(cvmx_usb_state_t *state, cvmx_usb_port_status_t port_status)
+{
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ usb->port_status = port_status;
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * @INTERNAL
+ * Convert a USB transaction into a handle
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param transaction
+ * Transaction to get handle for
+ *
+ * @return Handle
+ */
+static inline int __cvmx_usb_get_submit_handle(cvmx_usb_internal_state_t *usb,
+ cvmx_usb_transaction_t *transaction)
+{
+ return ((unsigned long)transaction - (unsigned long)usb->transaction) /
+ sizeof(*transaction);
+}
+
+
+/**
+ * @INTERNAL
+ * Convert a USB pipe into a handle
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe Pipe to get handle for
+ *
+ * @return Handle
+ */
+static inline int __cvmx_usb_get_pipe_handle(cvmx_usb_internal_state_t *usb,
+ cvmx_usb_pipe_t *pipe)
+{
+ return ((unsigned long)pipe - (unsigned long)usb->pipe) / sizeof(*pipe);
+}
+
+
+/**
+ * Open a virtual pipe between the host and a USB device. A pipe
+ * must be opened before data can be transferred between a device
+ * and Octeon.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param flags Optional pipe flags defined in
+ * cvmx_usb_pipe_flags_t.
+ * @param device_addr
+ * USB device address to open the pipe to
+ * (0-127).
+ * @param endpoint_num
+ * USB endpoint number to open the pipe to
+ * (0-15).
+ * @param device_speed
+ * The speed of the device the pipe is going
+ * to. This must match the device's speed,
+ * which may be different than the port speed.
+ * @param max_packet The maximum packet length the device can
+ * transmit/receive (low speed=0-8, full
+ * speed=0-1023, high speed=0-1024). This value
+ * comes from the standard endpoint descriptor
+ * field wMaxPacketSize bits <10:0>.
+ * @param transfer_type
+ * The type of transfer this pipe is for.
+ * @param transfer_dir
+ * The direction the pipe is in. This is not
+ * used for control pipes.
+ * @param interval For ISOCHRONOUS and INTERRUPT transfers,
+ * this is how often the transfer is scheduled
+ * for. All other transfers should specify
+ * zero. The units are in frames (8000/sec at
+ * high speed, 1000/sec for full speed).
+ * @param multi_count
+ * For high speed devices, this is the maximum
+ * allowed number of packet per microframe.
+ * Specify zero for non high speed devices. This
+ * value comes from the standard endpoint descriptor
+ * field wMaxPacketSize bits <12:11>.
+ * @param hub_device_addr
+ * Hub device address this device is connected
+ * to. Devices connected directly to Octeon
+ * use zero. This is only used when the device
+ * is full/low speed behind a high speed hub.
+ * The address will be of the high speed hub,
+ * not and full speed hubs after it.
+ * @param hub_port Which port on the hub the device is
+ * connected. Use zero for devices connected
+ * directly to Octeon. Like hub_device_addr,
+ * this is only used for full/low speed
+ * devices behind a high speed hub.
+ *
+ * @return A non negative value is a pipe handle. Negative
+ * values are failure codes from cvmx_usb_status_t.
+ */
+int cvmx_usb_open_pipe(cvmx_usb_state_t *state, cvmx_usb_pipe_flags_t flags,
+ int device_addr, int endpoint_num,
+ cvmx_usb_speed_t device_speed, int max_packet,
+ cvmx_usb_transfer_t transfer_type,
+ cvmx_usb_direction_t transfer_dir, int interval,
+ int multi_count, int hub_device_addr, int hub_port)
+{
+ cvmx_usb_pipe_t *pipe;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("0x%x", flags);
+ CVMX_USB_LOG_PARAM("%d", device_addr);
+ CVMX_USB_LOG_PARAM("%d", endpoint_num);
+ CVMX_USB_LOG_PARAM("%d", device_speed);
+ CVMX_USB_LOG_PARAM("%d", max_packet);
+ CVMX_USB_LOG_PARAM("%d", transfer_type);
+ CVMX_USB_LOG_PARAM("%d", transfer_dir);
+ CVMX_USB_LOG_PARAM("%d", interval);
+ CVMX_USB_LOG_PARAM("%d", multi_count);
+ CVMX_USB_LOG_PARAM("%d", hub_device_addr);
+ CVMX_USB_LOG_PARAM("%d", hub_port);
+
+ if (cvmx_unlikely((device_addr < 0) || (device_addr > MAX_USB_ADDRESS)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((endpoint_num < 0) || (endpoint_num > MAX_USB_ENDPOINT)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(device_speed > CVMX_USB_SPEED_LOW))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((max_packet <= 0) || (max_packet > 1024)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(transfer_type > CVMX_USB_TRANSFER_INTERRUPT))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((transfer_dir != CVMX_USB_DIRECTION_OUT) &&
+ (transfer_dir != CVMX_USB_DIRECTION_IN)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(interval < 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((transfer_type == CVMX_USB_TRANSFER_CONTROL) && interval))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(multi_count < 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((device_speed != CVMX_USB_SPEED_HIGH) &&
+ (multi_count != 0)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((hub_device_addr < 0) || (hub_device_addr > MAX_USB_ADDRESS)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((hub_port < 0) || (hub_port > MAX_USB_HUB_PORT)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* Find a free pipe */
+ pipe = usb->free_pipes.head;
+ if (!pipe)
+ CVMX_USB_RETURN(CVMX_USB_NO_MEMORY);
+ __cvmx_usb_remove_pipe(&usb->free_pipes, pipe);
+ pipe->flags = flags | __CVMX_USB_PIPE_FLAGS_OPEN;
+ if ((device_speed == CVMX_USB_SPEED_HIGH) &&
+ (transfer_dir == CVMX_USB_DIRECTION_OUT) &&
+ (transfer_type == CVMX_USB_TRANSFER_BULK))
+ pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
+ pipe->device_addr = device_addr;
+ pipe->endpoint_num = endpoint_num;
+ pipe->device_speed = device_speed;
+ pipe->max_packet = max_packet;
+ pipe->transfer_type = transfer_type;
+ pipe->transfer_dir = transfer_dir;
+ /* All pipes use interval to rate limit NAK processing. Force an interval
+ if one wasn't supplied */
+ if (!interval)
+ interval = 1;
+ if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+ pipe->interval = interval*8;
+ /* Force start splits to be schedule on uFrame 0 */
+ pipe->next_tx_frame = ((usb->frame_number+7)&~7) + pipe->interval;
+ }
+ else {
+ pipe->interval = interval;
+ pipe->next_tx_frame = usb->frame_number + pipe->interval;
+ }
+ pipe->multi_count = multi_count;
+ pipe->hub_device_addr = hub_device_addr;
+ pipe->hub_port = hub_port;
+ pipe->pid_toggle = 0;
+ pipe->split_sc_frame = -1;
+ __cvmx_usb_append_pipe(&usb->idle_pipes, pipe);
+
+ /* We don't need to tell the hardware about this pipe yet since
+ it doesn't have any submitted requests */
+
+ CVMX_USB_RETURN(__cvmx_usb_get_pipe_handle(usb, pipe));
+}
+
+
+/**
+ * @INTERNAL
+ * Poll the RX FIFOs and remove data as needed. This function is only used
+ * in non DMA mode. It is very important that this function be called quickly
+ * enough to prevent FIFO overflow.
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ */
+static void __cvmx_usb_poll_rx_fifo(cvmx_usb_internal_state_t *usb)
+{
+ cvmx_usbcx_grxstsph_t rx_status;
+ int channel;
+ int bytes;
+ uint64_t address;
+ uint32_t *ptr;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+
+ rx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GRXSTSPH(usb->index));
+ /* Only read data if IN data is there */
+ if (rx_status.s.pktsts != 2)
+ CVMX_USB_RETURN_NOTHING();
+ /* Check if no data is available */
+ if (!rx_status.s.bcnt)
+ CVMX_USB_RETURN_NOTHING();
+
+ channel = rx_status.s.chnum;
+ bytes = rx_status.s.bcnt;
+ if (!bytes)
+ CVMX_USB_RETURN_NOTHING();
+
+ /* Get where the DMA engine would have written this data */
+ address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8);
+ ptr = cvmx_phys_to_ptr(address);
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, address + bytes);
+
+ /* Loop writing the FIFO data for this packet into memory */
+ while (bytes > 0) {
+ *ptr++ = __cvmx_usb_read_csr32(usb, USB_FIFO_ADDRESS(channel, usb->index));
+ bytes -= 4;
+ }
+ CVMX_SYNCW;
+
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * Fill the TX hardware fifo with data out of the software
+ * fifos
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param fifo Software fifo to use
+ * @param available Amount of space in the hardware fifo
+ *
+ * @return Non zero if the hardware fifo was too small and needs
+ * to be serviced again.
+ */
+static int __cvmx_usb_fill_tx_hw(cvmx_usb_internal_state_t *usb, cvmx_usb_tx_fifo_t *fifo, int available)
+{
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+ CVMX_USB_LOG_PARAM("%p", fifo);
+ CVMX_USB_LOG_PARAM("%d", available);
+
+ /* We're done either when there isn't anymore space or the software FIFO
+ is empty */
+ while (available && (fifo->head != fifo->tail)) {
+ int i = fifo->tail;
+ const uint32_t *ptr = cvmx_phys_to_ptr(fifo->entry[i].address);
+ uint64_t csr_address = USB_FIFO_ADDRESS(fifo->entry[i].channel, usb->index) ^ 4;
+ int words = available;
+
+ /* Limit the amount of data to waht the SW fifo has */
+ if (fifo->entry[i].size <= available) {
+ words = fifo->entry[i].size;
+ fifo->tail++;
+ if (fifo->tail > MAX_CHANNELS)
+ fifo->tail = 0;
+ }
+
+ /* Update the next locations and counts */
+ available -= words;
+ fifo->entry[i].address += words * 4;
+ fifo->entry[i].size -= words;
+
+ /* Write the HW fifo data. The read every three writes is due
+ to an errata on CN3XXX chips */
+ while (words > 3) {
+ cvmx_write64_uint32(csr_address, *ptr++);
+ cvmx_write64_uint32(csr_address, *ptr++);
+ cvmx_write64_uint32(csr_address, *ptr++);
+ cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
+ words -= 3;
+ }
+ cvmx_write64_uint32(csr_address, *ptr++);
+ if (--words) {
+ cvmx_write64_uint32(csr_address, *ptr++);
+ if (--words)
+ cvmx_write64_uint32(csr_address, *ptr++);
+ }
+ cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index));
+ }
+ CVMX_USB_RETURN(fifo->head != fifo->tail);
+}
+
+
+/**
+ * Check the hardware FIFOs and fill them as needed
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ */
+static void __cvmx_usb_poll_tx_fifo(cvmx_usb_internal_state_t *usb)
+{
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+
+ if (usb->periodic.head != usb->periodic.tail) {
+ cvmx_usbcx_hptxsts_t tx_status;
+ tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXSTS(usb->index));
+ if (__cvmx_usb_fill_tx_hw(usb, &usb->periodic, tx_status.s.ptxfspcavail))
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, ptxfempmsk, 1);
+ else
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, ptxfempmsk, 0);
+ }
+
+ if (usb->nonperiodic.head != usb->nonperiodic.tail) {
+ cvmx_usbcx_gnptxsts_t tx_status;
+ tx_status.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXSTS(usb->index));
+ if (__cvmx_usb_fill_tx_hw(usb, &usb->nonperiodic, tx_status.s.nptxfspcavail))
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, nptxfempmsk, 1);
+ else
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, nptxfempmsk, 0);
+ }
+
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * @INTERNAL
+ * Fill the TX FIFO with an outgoing packet
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param channel Channel number to get packet from
+ */
+static void __cvmx_usb_fill_tx_fifo(cvmx_usb_internal_state_t *usb, int channel)
+{
+ cvmx_usbcx_hccharx_t hcchar;
+ cvmx_usbcx_hcspltx_t usbc_hcsplt;
+ cvmx_usbcx_hctsizx_t usbc_hctsiz;
+ cvmx_usb_tx_fifo_t *fifo;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+ CVMX_USB_LOG_PARAM("%d", channel);
+
+ /* We only need to fill data on outbound channels */
+ hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
+ if (hcchar.s.epdir != CVMX_USB_DIRECTION_OUT)
+ CVMX_USB_RETURN_NOTHING();
+
+ /* OUT Splits only have data on the start and not the complete */
+ usbc_hcsplt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index));
+ if (usbc_hcsplt.s.spltena && usbc_hcsplt.s.compsplt)
+ CVMX_USB_RETURN_NOTHING();
+
+ /* Find out how many bytes we need to fill and convert it into 32bit words */
+ usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
+ if (!usbc_hctsiz.s.xfersize)
+ CVMX_USB_RETURN_NOTHING();
+
+ if ((hcchar.s.eptype == CVMX_USB_TRANSFER_INTERRUPT) ||
+ (hcchar.s.eptype == CVMX_USB_TRANSFER_ISOCHRONOUS))
+ fifo = &usb->periodic;
+ else
+ fifo = &usb->nonperiodic;
+
+ fifo->entry[fifo->head].channel = channel;
+ fifo->entry[fifo->head].address = __cvmx_usb_read_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8);
+ fifo->entry[fifo->head].size = (usbc_hctsiz.s.xfersize+3)>>2;
+ fifo->head++;
+ if (fifo->head > MAX_CHANNELS)
+ fifo->head = 0;
+
+ __cvmx_usb_poll_tx_fifo(usb);
+
+ CVMX_USB_RETURN_NOTHING();
+}
+
+/**
+ * @INTERNAL
+ * Perform channel specific setup for Control transactions. All
+ * the generic stuff will already have been done in
+ * __cvmx_usb_start_channel()
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param channel Channel to setup
+ * @param pipe Pipe for control transaction
+ */
+static void __cvmx_usb_start_channel_control(cvmx_usb_internal_state_t *usb,
+ int channel,
+ cvmx_usb_pipe_t *pipe)
+{
+ cvmx_usb_transaction_t *transaction = pipe->head;
+ cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header);
+ int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes;
+ int packets_to_transfer;
+ cvmx_usbcx_hctsizx_t usbc_hctsiz;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+ CVMX_USB_LOG_PARAM("%d", channel);
+ CVMX_USB_LOG_PARAM("%p", pipe);
+
+ usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
+
+ switch (transaction->stage) {
+ case CVMX_USB_STAGE_NON_CONTROL:
+ case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
+ cvmx_dprintf("%s: ERROR - Non control stage\n", __FUNCTION__);
+ break;
+ case CVMX_USB_STAGE_SETUP:
+ usbc_hctsiz.s.pid = 3; /* Setup */
+ bytes_to_transfer = sizeof(*header);
+ /* All Control operations start with a setup going OUT */
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, CVMX_USB_DIRECTION_OUT);
+ /* Setup send the control header instead of the buffer data. The
+ buffer data will be used in the next stage */
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, transaction->control_header);
+ break;
+ case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
+ usbc_hctsiz.s.pid = 3; /* Setup */
+ bytes_to_transfer = 0;
+ /* All Control operations start with a setup going OUT */
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir, CVMX_USB_DIRECTION_OUT);
+ USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1);
+ break;
+ case CVMX_USB_STAGE_DATA:
+ usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+ if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+ if (header->s.request_type & 0x80)
+ bytes_to_transfer = 0;
+ else if (bytes_to_transfer > pipe->max_packet)
+ bytes_to_transfer = pipe->max_packet;
+ }
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
+ cvmx_usbcx_hccharx_t, epdir,
+ ((header->s.request_type & 0x80) ?
+ CVMX_USB_DIRECTION_IN :
+ CVMX_USB_DIRECTION_OUT));
+ break;
+ case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
+ usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+ if (!(header->s.request_type & 0x80))
+ bytes_to_transfer = 0;
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),
+ cvmx_usbcx_hccharx_t, epdir,
+ ((header->s.request_type & 0x80) ?
+ CVMX_USB_DIRECTION_IN :
+ CVMX_USB_DIRECTION_OUT));
+ USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1);
+ break;
+ case CVMX_USB_STAGE_STATUS:
+ usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+ bytes_to_transfer = 0;
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir,
+ ((header->s.request_type & 0x80) ?
+ CVMX_USB_DIRECTION_OUT :
+ CVMX_USB_DIRECTION_IN));
+ break;
+ case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
+ usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+ bytes_to_transfer = 0;
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, epdir,
+ ((header->s.request_type & 0x80) ?
+ CVMX_USB_DIRECTION_OUT :
+ CVMX_USB_DIRECTION_IN));
+ USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), cvmx_usbcx_hcspltx_t, compsplt, 1);
+ break;
+ }
+
+ /* Make sure the transfer never exceeds the byte limit of the hardware.
+ Further bytes will be sent as continued transactions */
+ if (bytes_to_transfer > MAX_TRANSFER_BYTES) {
+ /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */
+ bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet;
+ bytes_to_transfer *= pipe->max_packet;
+ }
+
+ /* Calculate the number of packets to transfer. If the length is zero
+ we still need to transfer one packet */
+ packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet;
+ if (packets_to_transfer == 0)
+ packets_to_transfer = 1;
+ else if ((packets_to_transfer>1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) {
+ /* Limit to one packet when not using DMA. Channels must be restarted
+ between every packet for IN transactions, so there is no reason to
+ do multiple packets in a row */
+ packets_to_transfer = 1;
+ bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+ }
+ else if (packets_to_transfer > MAX_TRANSFER_PACKETS) {
+ /* Limit the number of packet and data transferred to what the
+ hardware can handle */
+ packets_to_transfer = MAX_TRANSFER_PACKETS;
+ bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+ }
+
+ usbc_hctsiz.s.xfersize = bytes_to_transfer;
+ usbc_hctsiz.s.pktcnt = packets_to_transfer;
+
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32);
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * @INTERNAL
+ * Start a channel to perform the pipe's head transaction
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param channel Channel to setup
+ * @param pipe Pipe to start
+ */
+static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb,
+ int channel,
+ cvmx_usb_pipe_t *pipe)
+{
+ cvmx_usb_transaction_t *transaction = pipe->head;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+ CVMX_USB_LOG_PARAM("%d", channel);
+ CVMX_USB_LOG_PARAM("%p", pipe);
+
+ if (cvmx_unlikely((usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS) ||
+ (pipe->flags & CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS)))
+ cvmx_dprintf("%s: Channel %d started. Pipe %d transaction %d stage %d\n",
+ __FUNCTION__, channel, __cvmx_usb_get_pipe_handle(usb, pipe),
+ __cvmx_usb_get_submit_handle(usb, transaction),
+ transaction->stage);
+
+ /* Make sure all writes to the DMA region get flushed */
+ CVMX_SYNCW;
+
+ /* Attach the channel to the pipe */
+ usb->pipe_for_channel[channel] = pipe;
+ pipe->channel = channel;
+ pipe->flags |= __CVMX_USB_PIPE_FLAGS_SCHEDULED;
+
+ /* Mark this channel as in use */
+ usb->idle_hardware_channels &= ~(1<<channel);
+
+ /* Enable the channel interrupt bits */
+ {
+ cvmx_usbcx_hcintx_t usbc_hcint;
+ cvmx_usbcx_hcintmskx_t usbc_hcintmsk;
+ cvmx_usbcx_haintmsk_t usbc_haintmsk;
+
+ /* Clear all channel status bits */
+ usbc_hcint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index));
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index), usbc_hcint.u32);
+
+ usbc_hcintmsk.u32 = 0;
+ usbc_hcintmsk.s.chhltdmsk = 1;
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
+ /* Channels need these extra interrupts when we aren't in DMA mode */
+ usbc_hcintmsk.s.datatglerrmsk = 1;
+ usbc_hcintmsk.s.frmovrunmsk = 1;
+ usbc_hcintmsk.s.bblerrmsk = 1;
+ usbc_hcintmsk.s.xacterrmsk = 1;
+ if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+ /* Splits don't generate xfercompl, so we need ACK and NYET */
+ usbc_hcintmsk.s.nyetmsk = 1;
+ usbc_hcintmsk.s.ackmsk = 1;
+ }
+ usbc_hcintmsk.s.nakmsk = 1;
+ usbc_hcintmsk.s.stallmsk = 1;
+ usbc_hcintmsk.s.xfercomplmsk = 1;
+ }
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), usbc_hcintmsk.u32);
+
+ /* Enable the channel interrupt to propagate */
+ usbc_haintmsk.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index));
+ usbc_haintmsk.s.haintmsk |= 1<<channel;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index), usbc_haintmsk.u32);
+ }
+
+ /* Setup the locations the DMA engines use */
+ {
+ uint64_t dma_address = transaction->buffer + transaction->actual_bytes;
+ if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
+ dma_address = transaction->buffer + transaction->iso_packets[0].offset + transaction->actual_bytes;
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + channel*8, dma_address);
+ __cvmx_usb_write_csr64(usb, CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel*8, dma_address);
+ }
+
+ /* Setup both the size of the transfer and the SPLIT characteristics */
+ {
+ cvmx_usbcx_hcspltx_t usbc_hcsplt = {.u32 = 0};
+ cvmx_usbcx_hctsizx_t usbc_hctsiz = {.u32 = 0};
+ int packets_to_transfer;
+ int bytes_to_transfer = transaction->buffer_length - transaction->actual_bytes;
+
+ /* ISOCHRONOUS transactions store each individual transfer size in the
+ packet structure, not the global buffer_length */
+ if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
+ bytes_to_transfer = transaction->iso_packets[0].length - transaction->actual_bytes;
+
+ /* We need to do split transactions when we are talking to non high
+ speed devices that are behind a high speed hub */
+ if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+ /* On the start split phase (stage is even) record the frame number we
+ will need to send the split complete. We only store the lower two bits
+ since the time ahead can only be two frames */
+ if ((transaction->stage&1) == 0) {
+ if (transaction->type == CVMX_USB_TRANSFER_BULK)
+ pipe->split_sc_frame = (usb->frame_number + 1) & 0x7f;
+ else
+ pipe->split_sc_frame = (usb->frame_number + 2) & 0x7f;
+ }
+ else
+ pipe->split_sc_frame = -1;
+
+ usbc_hcsplt.s.spltena = 1;
+ usbc_hcsplt.s.hubaddr = pipe->hub_device_addr;
+ usbc_hcsplt.s.prtaddr = pipe->hub_port;
+ usbc_hcsplt.s.compsplt = (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE);
+
+ /* SPLIT transactions can only ever transmit one data packet so
+ limit the transfer size to the max packet size */
+ if (bytes_to_transfer > pipe->max_packet)
+ bytes_to_transfer = pipe->max_packet;
+
+ /* ISOCHRONOUS OUT splits are unique in that they limit
+ data transfers to 188 byte chunks representing the
+ begin/middle/end of the data or all */
+ if (!usbc_hcsplt.s.compsplt &&
+ (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
+ (pipe->transfer_type == CVMX_USB_TRANSFER_ISOCHRONOUS)) {
+ /* Clear the split complete frame number as there isn't going
+ to be a split complete */
+ pipe->split_sc_frame = -1;
+ /* See if we've started this transfer and sent data */
+ if (transaction->actual_bytes == 0) {
+ /* Nothing sent yet, this is either a begin or the
+ entire payload */
+ if (bytes_to_transfer <= 188)
+ usbc_hcsplt.s.xactpos = 3; /* Entire payload in one go */
+ else
+ usbc_hcsplt.s.xactpos = 2; /* First part of payload */
+ }
+ else {
+ /* Continuing the previous data, we must either be
+ in the middle or at the end */
+ if (bytes_to_transfer <= 188)
+ usbc_hcsplt.s.xactpos = 1; /* End of payload */
+ else
+ usbc_hcsplt.s.xactpos = 0; /* Middle of payload */
+ }
+ /* Again, the transfer size is limited to 188 bytes */
+ if (bytes_to_transfer > 188)
+ bytes_to_transfer = 188;
+ }
+ }
+
+ /* Make sure the transfer never exceeds the byte limit of the hardware.
+ Further bytes will be sent as continued transactions */
+ if (bytes_to_transfer > MAX_TRANSFER_BYTES) {
+ /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */
+ bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet;
+ bytes_to_transfer *= pipe->max_packet;
+ }
+
+ /* Calculate the number of packets to transfer. If the length is zero
+ we still need to transfer one packet */
+ packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet;
+ if (packets_to_transfer == 0)
+ packets_to_transfer = 1;
+ else if ((packets_to_transfer>1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) {
+ /* Limit to one packet when not using DMA. Channels must be restarted
+ between every packet for IN transactions, so there is no reason to
+ do multiple packets in a row */
+ packets_to_transfer = 1;
+ bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+ }
+ else if (packets_to_transfer > MAX_TRANSFER_PACKETS) {
+ /* Limit the number of packet and data transferred to what the
+ hardware can handle */
+ packets_to_transfer = MAX_TRANSFER_PACKETS;
+ bytes_to_transfer = packets_to_transfer * pipe->max_packet;
+ }
+
+ usbc_hctsiz.s.xfersize = bytes_to_transfer;
+ usbc_hctsiz.s.pktcnt = packets_to_transfer;
+
+ /* Update the DATA0/DATA1 toggle */
+ usbc_hctsiz.s.pid = __cvmx_usb_get_data_pid(pipe);
+ /* High speed pipes may need a hardware ping before they start */
+ if (pipe->flags & __CVMX_USB_PIPE_FLAGS_NEED_PING)
+ usbc_hctsiz.s.dopng = 1;
+
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCSPLTX(channel, usb->index), usbc_hcsplt.u32);
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), usbc_hctsiz.u32);
+ }
+
+ /* Setup the Host Channel Characteristics Register */
+ {
+ cvmx_usbcx_hccharx_t usbc_hcchar = {.u32 = 0};
+
+ /* Set the startframe odd/even properly. This is only used for periodic */
+ usbc_hcchar.s.oddfrm = usb->frame_number&1;
+
+ /* Set the number of back to back packets allowed by this endpoint.
+ Split transactions interpret "ec" as the number of immediate
+ retries of failure. These retries happen too quickly, so we
+ disable these entirely for splits */
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ usbc_hcchar.s.ec = 1;
+ else if (pipe->multi_count < 1)
+ usbc_hcchar.s.ec = 1;
+ else if (pipe->multi_count > 3)
+ usbc_hcchar.s.ec = 3;
+ else
+ usbc_hcchar.s.ec = pipe->multi_count;
+
+ /* Set the rest of the endpoint specific settings */
+ usbc_hcchar.s.devaddr = pipe->device_addr;
+ usbc_hcchar.s.eptype = transaction->type;
+ usbc_hcchar.s.lspddev = (pipe->device_speed == CVMX_USB_SPEED_LOW);
+ usbc_hcchar.s.epdir = pipe->transfer_dir;
+ usbc_hcchar.s.epnum = pipe->endpoint_num;
+ usbc_hcchar.s.mps = pipe->max_packet;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
+ }
+
+ /* Do transaction type specific fixups as needed */
+ switch (transaction->type) {
+ case CVMX_USB_TRANSFER_CONTROL:
+ __cvmx_usb_start_channel_control(usb, channel, pipe);
+ break;
+ case CVMX_USB_TRANSFER_BULK:
+ case CVMX_USB_TRANSFER_INTERRUPT:
+ break;
+ case CVMX_USB_TRANSFER_ISOCHRONOUS:
+ if (!__cvmx_usb_pipe_needs_split(usb, pipe)) {
+ /* ISO transactions require different PIDs depending on direction
+ and how many packets are needed */
+ if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) {
+ if (pipe->multi_count < 2) /* Need DATA0 */
+ USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), cvmx_usbcx_hctsizx_t, pid, 0);
+ else /* Need MDATA */
+ USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), cvmx_usbcx_hctsizx_t, pid, 3);
+ }
+ }
+ break;
+ }
+ {
+ cvmx_usbcx_hctsizx_t usbc_hctsiz = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index))};
+ transaction->xfersize = usbc_hctsiz.s.xfersize;
+ transaction->pktcnt = usbc_hctsiz.s.pktcnt;
+ }
+ /* Remeber when we start a split transaction */
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ usb->active_split = transaction;
+ USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), cvmx_usbcx_hccharx_t, chena, 1);
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+ __cvmx_usb_fill_tx_fifo(usb, channel);
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * @INTERNAL
+ * Find a pipe that is ready to be scheduled to hardware.
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param list Pipe list to search
+ * @param current_frame
+ * Frame counter to use as a time reference.
+ *
+ * @return Pipe or NULL if none are ready
+ */
+static cvmx_usb_pipe_t *__cvmx_usb_find_ready_pipe(cvmx_usb_internal_state_t *usb, cvmx_usb_pipe_list_t *list, uint64_t current_frame)
+{
+ cvmx_usb_pipe_t *pipe = list->head;
+ while (pipe) {
+ if (!(pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED) && pipe->head &&
+ (pipe->next_tx_frame <= current_frame) &&
+ ((pipe->split_sc_frame == -1) || ((((int)current_frame - (int)pipe->split_sc_frame) & 0x7f) < 0x40)) &&
+ (!usb->active_split || (usb->active_split == pipe->head))) {
+ CVMX_PREFETCH(pipe, 128);
+ CVMX_PREFETCH(pipe->head, 0);
+ return pipe;
+ }
+ pipe = pipe->next;
+ }
+ return NULL;
+}
+
+
+/**
+ * @INTERNAL
+ * Called whenever a pipe might need to be scheduled to the
+ * hardware.
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param is_sof True if this schedule was called on a SOF interrupt.
+ */
+static void __cvmx_usb_schedule(cvmx_usb_internal_state_t *usb, int is_sof)
+{
+ int channel;
+ cvmx_usb_pipe_t *pipe;
+ int need_sof;
+ cvmx_usb_transfer_t ttype;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
+ /* Without DMA we need to be careful to not schedule something at the end of a frame and cause an overrun */
+ cvmx_usbcx_hfnum_t hfnum = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index))};
+ cvmx_usbcx_hfir_t hfir = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFIR(usb->index))};
+ if (hfnum.s.frrem < hfir.s.frint/4)
+ goto done;
+ }
+
+ while (usb->idle_hardware_channels) {
+ /* Find an idle channel */
+ CVMX_CLZ(channel, usb->idle_hardware_channels);
+ channel = 31 - channel;
+ if (cvmx_unlikely(channel > 7)) {
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO))
+ cvmx_dprintf("%s: Idle hardware channels has a channel higher than 7. This is wrong\n", __FUNCTION__);
+ break;
+ }
+
+ /* Find a pipe needing service */
+ pipe = NULL;
+ if (is_sof) {
+ /* Only process periodic pipes on SOF interrupts. This way we are
+ sure that the periodic data is sent in the beginning of the
+ frame */
+ pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_ISOCHRONOUS, usb->frame_number);
+ if (cvmx_likely(!pipe))
+ pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_INTERRUPT, usb->frame_number);
+ }
+ if (cvmx_likely(!pipe)) {
+ pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_CONTROL, usb->frame_number);
+ if (cvmx_likely(!pipe))
+ pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_BULK, usb->frame_number);
+ }
+ if (!pipe)
+ break;
+
+ CVMX_USB_LOG_PARAM("%d", channel);
+ CVMX_USB_LOG_PARAM("%p", pipe);
+
+ if (cvmx_unlikely((usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS) ||
+ (pipe->flags & CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS))) {
+ cvmx_usb_transaction_t *transaction = pipe->head;
+ const cvmx_usb_control_header_t *header = (transaction->control_header) ? cvmx_phys_to_ptr(transaction->control_header) : NULL;
+ const char *dir = (pipe->transfer_dir == CVMX_USB_DIRECTION_IN) ? "IN" : "OUT";
+ const char *type;
+ switch (pipe->transfer_type) {
+ case CVMX_USB_TRANSFER_CONTROL:
+ type = "SETUP";
+ dir = (header->s.request_type & 0x80) ? "IN" : "OUT";
+ break;
+ case CVMX_USB_TRANSFER_ISOCHRONOUS:
+ type = "ISOCHRONOUS";
+ break;
+ case CVMX_USB_TRANSFER_BULK:
+ type = "BULK";
+ break;
+ default: /* CVMX_USB_TRANSFER_INTERRUPT */
+ type = "INTERRUPT";
+ break;
+ }
+ cvmx_dprintf("%s: Starting pipe %d, transaction %d on channel %d. %s %s len=%d header=0x%llx\n",
+ __FUNCTION__, __cvmx_usb_get_pipe_handle(usb, pipe),
+ __cvmx_usb_get_submit_handle(usb, transaction),
+ channel, type, dir,
+ transaction->buffer_length,
+ (header) ? (unsigned long long)header->u64 : 0ull);
+ }
+ __cvmx_usb_start_channel(usb, channel, pipe);
+ }
+
+done:
+ /* Only enable SOF interrupts when we have transactions pending in the
+ future that might need to be scheduled */
+ need_sof = 0;
+ for (ttype=CVMX_USB_TRANSFER_CONTROL; ttype<=CVMX_USB_TRANSFER_INTERRUPT; ttype++) {
+ pipe = usb->active_pipes[ttype].head;
+ while (pipe) {
+ if (pipe->next_tx_frame > usb->frame_number) {
+ need_sof = 1;
+ break;
+ }
+ pipe=pipe->next;
+ }
+ }
+ USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), cvmx_usbcx_gintmsk_t, sofmsk, need_sof);
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * @INTERNAL
+ * Call a user's callback for a specific reason.
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe Pipe the callback is for or NULL
+ * @param transaction
+ * Transaction the callback is for or NULL
+ * @param reason Reason this callback is being called
+ * @param complete_code
+ * Completion code for the transaction, if any
+ */
+static void __cvmx_usb_perform_callback(cvmx_usb_internal_state_t *usb,
+ cvmx_usb_pipe_t *pipe,
+ cvmx_usb_transaction_t *transaction,
+ cvmx_usb_callback_t reason,
+ cvmx_usb_complete_t complete_code)
+{
+ cvmx_usb_callback_func_t callback = usb->callback[reason];
+ void *user_data = usb->callback_data[reason];
+ int submit_handle = -1;
+ int pipe_handle = -1;
+ int bytes_transferred = 0;
+
+ if (pipe)
+ pipe_handle = __cvmx_usb_get_pipe_handle(usb, pipe);
+
+ if (transaction) {
+ submit_handle = __cvmx_usb_get_submit_handle(usb, transaction);
+ bytes_transferred = transaction->actual_bytes;
+ /* Transactions are allowed to override the default callback */
+ if ((reason == CVMX_USB_CALLBACK_TRANSFER_COMPLETE) && transaction->callback) {
+ callback = transaction->callback;
+ user_data = transaction->callback_data;
+ }
+ }
+
+ if (!callback)
+ return;
+
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLBACKS))
+ cvmx_dprintf("%*s%s: calling callback %p(usb=%p, complete_code=%s, "
+ "pipe_handle=%d, submit_handle=%d, bytes_transferred=%d, user_data=%p);\n",
+ 2*usb->indent, "", __FUNCTION__, callback, usb,
+ __cvmx_usb_complete_to_string(complete_code),
+ pipe_handle, submit_handle, bytes_transferred, user_data);
+
+ callback((cvmx_usb_state_t *)usb, reason, complete_code, pipe_handle, submit_handle,
+ bytes_transferred, user_data);
+
+ if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLBACKS))
+ cvmx_dprintf("%*s%s: callback %p complete\n", 2*usb->indent, "",
+ __FUNCTION__, callback);
+}
+
+
+/**
+ * @INTERNAL
+ * Signal the completion of a transaction and free it. The
+ * transaction will be removed from the pipe transaction list.
+ *
+ * @param usb USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe Pipe the transaction is on
+ * @param transaction
+ * Transaction that completed
+ * @param complete_code
+ * Completion code
+ */
+static void __cvmx_usb_perform_complete(cvmx_usb_internal_state_t * usb,
+ cvmx_usb_pipe_t *pipe,
+ cvmx_usb_transaction_t *transaction,
+ cvmx_usb_complete_t complete_code)
+{
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+ CVMX_USB_LOG_PARAM("%p", pipe);
+ CVMX_USB_LOG_PARAM("%p", transaction);
+ CVMX_USB_LOG_PARAM("%d", complete_code);
+
+ /* If this was a split then clear our split in progress marker */
+ if (usb->active_split == transaction)
+ usb->active_split = NULL;
+
+ /* Isochronous transactions need extra processing as they might not be done
+ after a single data transfer */
+ if (cvmx_unlikely(transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)) {
+ /* Update the number of bytes transferred in this ISO packet */
+ transaction->iso_packets[0].length = transaction->actual_bytes;
+ transaction->iso_packets[0].status = complete_code;
+
+ /* If there are more ISOs pending and we succeeded, schedule the next
+ one */
+ if ((transaction->iso_number_packets > 1) && (complete_code == CVMX_USB_COMPLETE_SUCCESS)) {
+ transaction->actual_bytes = 0; /* No bytes transferred for this packet as of yet */
+ transaction->iso_number_packets--; /* One less ISO waiting to transfer */
+ transaction->iso_packets++; /* Increment to the next location in our packet array */
+ transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
+ goto done;
+ }
+ }
+
+ /* Remove the transaction from the pipe list */
+ if (transaction->next)
+ transaction->next->prev = transaction->prev;
+ else
+ pipe->tail = transaction->prev;
+ if (transaction->prev)
+ transaction->prev->next = transaction->next;
+ else
+ pipe->head = transaction->next;
+ if (!pipe->head) {
+ __cvmx_usb_remove_pipe(usb->active_pipes + pipe->transfer_type, pipe);
+ __cvmx_usb_append_pipe(&usb->idle_pipes, pipe);
+
+ }
+ __cvmx_usb_perform_callback(usb, pipe, transaction,
+ CVMX_USB_CALLBACK_TRANSFER_COMPLETE,
+ complete_code);
+ __cvmx_usb_free_transaction(usb, transaction);
+done:
+ CVMX_USB_RETURN_NOTHING();
+}
+
+
+/**
+ * @INTERNAL
+ * Submit a usb transaction to a pipe. Called for all types
+ * of transactions.
+ *
+ * @param usb
+ * @param pipe_handle
+ * Which pipe to submit to. Will be validated in this function.
+ * @param type Transaction type
+ * @param flags Flags for the transaction
+ * @param buffer User buffer for the transaction
+ * @param buffer_length
+ * User buffer's length in bytes
+ * @param control_header
+ * For control transactions, the 8 byte standard header
+ * @param iso_start_frame
+ * For ISO transactions, the start frame
+ * @param iso_number_packets
+ * For ISO, the number of packet in the transaction.
+ * @param iso_packets
+ * A description of each ISO packet
+ * @param callback User callback to call when the transaction completes
+ * @param user_data User's data for the callback
+ *
+ * @return Submit handle or negative on failure. Matches the result
+ * in the external API.
+ */
+static int __cvmx_usb_submit_transaction(cvmx_usb_internal_state_t *usb,
+ int pipe_handle,
+ cvmx_usb_transfer_t type,
+ int flags,
+ uint64_t buffer,
+ int buffer_length,
+ uint64_t control_header,
+ int iso_start_frame,
+ int iso_number_packets,
+ cvmx_usb_iso_packet_t *iso_packets,
+ cvmx_usb_callback_func_t callback,
+ void *user_data)
+{
+ int submit_handle;
+ cvmx_usb_transaction_t *transaction;
+ cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle;
+
+ CVMX_USB_LOG_CALLED();
+ if (cvmx_unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ /* Fail if the pipe isn't open */
+ if (cvmx_unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(pipe->transfer_type != type))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ transaction = __cvmx_usb_alloc_transaction(usb);
+ if (cvmx_unlikely(!transaction))
+ CVMX_USB_RETURN(CVMX_USB_NO_MEMORY);
+
+ transaction->type = type;
+ transaction->flags |= flags;
+ transaction->buffer = buffer;
+ transaction->buffer_length = buffer_length;
+ transaction->control_header = control_header;
+ transaction->iso_start_frame = iso_start_frame; // FIXME: This is not used, implement it
+ transaction->iso_number_packets = iso_number_packets;
+ transaction->iso_packets = iso_packets;
+ transaction->callback = callback;
+ transaction->callback_data = user_data;
+ if (transaction->type == CVMX_USB_TRANSFER_CONTROL)
+ transaction->stage = CVMX_USB_STAGE_SETUP;
+ else
+ transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
+
+ transaction->next = NULL;
+ if (pipe->tail) {
+ transaction->prev = pipe->tail;
+ transaction->prev->next = transaction;
+ }
+ else {
+ if (pipe->next_tx_frame < usb->frame_number)
+ pipe->next_tx_frame = usb->frame_number + pipe->interval -
+ (usb->frame_number - pipe->next_tx_frame) % pipe->interval;
+ transaction->prev = NULL;
+ pipe->head = transaction;
+ __cvmx_usb_remove_pipe(&usb->idle_pipes, pipe);
+ __cvmx_usb_append_pipe(usb->active_pipes + pipe->transfer_type, pipe);
+ }
+ pipe->tail = transaction;
+
+ submit_handle = __cvmx_usb_get_submit_handle(usb, transaction);
+
+ /* We may need to schedule the pipe if this was the head of the pipe */
+ if (!transaction->prev)
+ __cvmx_usb_schedule(usb, 0);
+
+ CVMX_USB_RETURN(submit_handle);
+}
+
+
+/**
+ * Call to submit a USB Bulk transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+int cvmx_usb_submit_bulk(cvmx_usb_state_t *state, int pipe_handle,
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data)
+{
+ int submit_handle;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)buffer);
+ CVMX_USB_LOG_PARAM("%d", buffer_length);
+
+ /* Pipe handle checking is done later in a common place */
+ if (cvmx_unlikely(!buffer))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(buffer_length < 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
+ CVMX_USB_TRANSFER_BULK,
+ 0, /* flags */
+ buffer,
+ buffer_length,
+ 0, /* control_header */
+ 0, /* iso_start_frame */
+ 0, /* iso_number_packets */
+ NULL, /* iso_packets */
+ callback,
+ user_data);
+ CVMX_USB_RETURN(submit_handle);
+}
+
+
+/**
+ * Call to submit a USB Interrupt transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+int cvmx_usb_submit_interrupt(cvmx_usb_state_t *state, int pipe_handle,
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data)
+{
+ int submit_handle;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)buffer);
+ CVMX_USB_LOG_PARAM("%d", buffer_length);
+
+ /* Pipe handle checking is done later in a common place */
+ if (cvmx_unlikely(!buffer))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(buffer_length < 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
+ CVMX_USB_TRANSFER_INTERRUPT,
+ 0, /* flags */
+ buffer,
+ buffer_length,
+ 0, /* control_header */
+ 0, /* iso_start_frame */
+ 0, /* iso_number_packets */
+ NULL, /* iso_packets */
+ callback,
+ user_data);
+ CVMX_USB_RETURN(submit_handle);
+}
+
+
+/**
+ * Call to submit a USB Control transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param control_header
+ * USB 8 byte control header physical address.
+ * Note that this is NOT A POINTER, but the
+ * full 64bit physical address of the buffer.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+int cvmx_usb_submit_control(cvmx_usb_state_t *state, int pipe_handle,
+ uint64_t control_header,
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data)
+{
+ int submit_handle;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+ cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(control_header);
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)control_header);
+ CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)buffer);
+ CVMX_USB_LOG_PARAM("%d", buffer_length);
+
+ /* Pipe handle checking is done later in a common place */
+ if (cvmx_unlikely(!control_header))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ /* Some drivers send a buffer with a zero length. God only knows why */
+ if (cvmx_unlikely(buffer && (buffer_length < 0)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(!buffer && (buffer_length != 0)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if ((header->s.request_type & 0x80) == 0)
+ buffer_length = cvmx_le16_to_cpu(header->s.length);
+
+ submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
+ CVMX_USB_TRANSFER_CONTROL,
+ 0, /* flags */
+ buffer,
+ buffer_length,
+ control_header,
+ 0, /* iso_start_frame */
+ 0, /* iso_number_packets */
+ NULL, /* iso_packets */
+ callback,
+ user_data);
+ CVMX_USB_RETURN(submit_handle);
+}
+
+
+/**
+ * Call to submit a USB Isochronous transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param start_frame
+ * Number of frames into the future to schedule
+ * this transaction.
+ * @param flags Flags to control the transfer. See
+ * cvmx_usb_isochronous_flags_t for the flag
+ * definitions.
+ * @param number_packets
+ * Number of sequential packets to transfer.
+ * "packets" is a pointer to an array of this
+ * many packet structures.
+ * @param packets Description of each transfer packet as
+ * defined by cvmx_usb_iso_packet_t. The array
+ * pointed to here must stay valid until the
+ * complete callback is called.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+int cvmx_usb_submit_isochronous(cvmx_usb_state_t *state, int pipe_handle,
+ int start_frame, int flags,
+ int number_packets,
+ cvmx_usb_iso_packet_t packets[],
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data)
+{
+ int submit_handle;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ CVMX_USB_LOG_PARAM("%d", start_frame);
+ CVMX_USB_LOG_PARAM("0x%x", flags);
+ CVMX_USB_LOG_PARAM("%d", number_packets);
+ CVMX_USB_LOG_PARAM("%p", packets);
+ CVMX_USB_LOG_PARAM("0x%llx", (unsigned long long)buffer);
+ CVMX_USB_LOG_PARAM("%d", buffer_length);
+
+ /* Pipe handle checking is done later in a common place */
+ if (cvmx_unlikely(start_frame < 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(flags & ~(CVMX_USB_ISOCHRONOUS_FLAGS_ALLOW_SHORT | CVMX_USB_ISOCHRONOUS_FLAGS_ASAP)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(number_packets < 1))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(!packets))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(!buffer))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(buffer_length < 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ submit_handle = __cvmx_usb_submit_transaction(usb, pipe_handle,
+ CVMX_USB_TRANSFER_ISOCHRONOUS,
+ flags,
+ buffer,
+ buffer_length,
+ 0, /* control_header */
+ start_frame,
+ number_packets,
+ packets,
+ callback,
+ user_data);
+ CVMX_USB_RETURN(submit_handle);
+}
+
+
+/**
+ * Cancel one outstanding request in a pipe. Canceling a request
+ * can fail if the transaction has already completed before cancel
+ * is called. Even after a successful cancel call, it may take
+ * a frame or two for the cvmx_usb_poll() function to call the
+ * associated callback.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Pipe handle to cancel requests in.
+ * @param submit_handle
+ * Handle to transaction to cancel, returned by the submit function.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_cancel(cvmx_usb_state_t *state, int pipe_handle,
+ int submit_handle)
+{
+ cvmx_usb_transaction_t *transaction;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+ cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ CVMX_USB_LOG_PARAM("%d", submit_handle);
+
+ if (cvmx_unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely((submit_handle < 0) || (submit_handle >= MAX_TRANSACTIONS)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* Fail if the pipe isn't open */
+ if (cvmx_unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ transaction = usb->transaction + submit_handle;
+
+ /* Fail if this transaction already completed */
+ if (cvmx_unlikely((transaction->flags & __CVMX_USB_TRANSACTION_FLAGS_IN_USE) == 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* If the transaction is the HEAD of the queue and scheduled. We need to
+ treat it special */
+ if ((pipe->head == transaction) &&
+ (pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED)) {
+ cvmx_usbcx_hccharx_t usbc_hcchar;
+
+ usb->pipe_for_channel[pipe->channel] = NULL;
+ pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED;
+
+ CVMX_SYNCW;
+
+ usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index));
+ /* If the channel isn't enabled then the transaction already completed */
+ if (usbc_hcchar.s.chena) {
+ usbc_hcchar.s.chdis = 1;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index), usbc_hcchar.u32);
+ }
+ }
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_CANCEL);
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Cancel all outstanding requests in a pipe. Logically all this
+ * does is call cvmx_usb_cancel() in a loop.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Pipe handle to cancel requests in.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_cancel_all(cvmx_usb_state_t *state, int pipe_handle)
+{
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+ cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ if (cvmx_unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* Fail if the pipe isn't open */
+ if (cvmx_unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* Simply loop through and attempt to cancel each transaction */
+ while (pipe->head) {
+ cvmx_usb_status_t result = cvmx_usb_cancel(state, pipe_handle,
+ __cvmx_usb_get_submit_handle(usb, pipe->head));
+ if (cvmx_unlikely(result != CVMX_USB_SUCCESS))
+ CVMX_USB_RETURN(result);
+ }
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Close a pipe created with cvmx_usb_open_pipe().
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Pipe handle to close.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t. CVMX_USB_BUSY is returned if the
+ * pipe has outstanding transfers.
+ */
+cvmx_usb_status_t cvmx_usb_close_pipe(cvmx_usb_state_t *state, int pipe_handle)
+{
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+ cvmx_usb_pipe_t *pipe = usb->pipe + pipe_handle;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", pipe_handle);
+ if (cvmx_unlikely((pipe_handle < 0) || (pipe_handle >= MAX_PIPES)))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* Fail if the pipe isn't open */
+ if (cvmx_unlikely((pipe->flags & __CVMX_USB_PIPE_FLAGS_OPEN) == 0))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ /* Fail if the pipe has pending transactions */
+ if (cvmx_unlikely(pipe->head))
+ CVMX_USB_RETURN(CVMX_USB_BUSY);
+
+ pipe->flags = 0;
+ __cvmx_usb_remove_pipe(&usb->idle_pipes, pipe);
+ __cvmx_usb_append_pipe(&usb->free_pipes, pipe);
+
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Register a function to be called when various USB events occur.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param reason Which event to register for.
+ * @param callback Function to call when the event occurs.
+ * @param user_data User data parameter to the function.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_register_callback(cvmx_usb_state_t *state,
+ cvmx_usb_callback_t reason,
+ cvmx_usb_callback_func_t callback,
+ void *user_data)
+{
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+ CVMX_USB_LOG_PARAM("%d", reason);
+ CVMX_USB_LOG_PARAM("%p", callback);
+ CVMX_USB_LOG_PARAM("%p", user_data);
+ if (cvmx_unlikely(reason >= __CVMX_USB_CALLBACK_END))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+ if (cvmx_unlikely(!callback))
+ CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM);
+
+ usb->callback[reason] = callback;
+ usb->callback_data[reason] = user_data;
+
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
+
+
+/**
+ * Get the current USB protocol level frame number. The frame
+ * number is always in the range of 0-0x7ff.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return USB frame number
+ */
+int cvmx_usb_get_frame_number(cvmx_usb_state_t *state)
+{
+ int frame_number;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+ cvmx_usbcx_hfnum_t usbc_hfnum;
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+
+ usbc_hfnum.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
+ frame_number = usbc_hfnum.s.frnum;
+
+ CVMX_USB_RETURN(frame_number);
+}
+
+
+/**
+ * @INTERNAL
+ * Poll a channel for status
+ *
+ * @param usb USB device
+ * @param channel Channel to poll
+ *
+ * @return Zero on success
+ */
+static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel)
+{
+ cvmx_usbcx_hcintx_t usbc_hcint;
+ cvmx_usbcx_hctsizx_t usbc_hctsiz;
+ cvmx_usbcx_hccharx_t usbc_hcchar;
+ cvmx_usb_pipe_t *pipe;
+ cvmx_usb_transaction_t *transaction;
+ int bytes_this_transfer;
+ int bytes_in_last_packet;
+ int packets_processed;
+ int buffer_space_left;
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", usb);
+ CVMX_USB_LOG_PARAM("%d", channel);
+
+ /* Read the interrupt status bits for the channel */
+ usbc_hcint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index));
+
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
+ usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
+
+ if (usbc_hcchar.s.chena && usbc_hcchar.s.chdis) {
+ /* There seems to be a bug in CN31XX which can cause interrupt
+ IN transfers to get stuck until we do a write of HCCHARX
+ without changing things */
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
+ CVMX_USB_RETURN(0);
+ }
+
+ /* In non DMA mode the channels don't halt themselves. We need to
+ manually disable channels that are left running */
+ if (!usbc_hcint.s.chhltd) {
+ if (usbc_hcchar.s.chena) {
+ cvmx_usbcx_hcintmskx_t hcintmsk;
+ /* Disable all interrupts except CHHLTD */
+ hcintmsk.u32 = 0;
+ hcintmsk.s.chhltdmsk = 1;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), hcintmsk.u32);
+ usbc_hcchar.s.chdis = 1;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
+ CVMX_USB_RETURN(0);
+ }
+ else if (usbc_hcint.s.xfercompl) {
+ /* Successful IN/OUT with transfer complete. Channel halt isn't needed */
+ }
+ else {
+ cvmx_dprintf("USB%d: Channel %d interrupt without halt\n", usb->index, channel);
+ CVMX_USB_RETURN(0);
+ }
+ }
+ }
+ else {
+ /* There is are no interrupts that we need to process when the channel is
+ still running */
+ if (!usbc_hcint.s.chhltd)
+ CVMX_USB_RETURN(0);
+ }
+
+ /* Disable the channel interrupts now that it is done */
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0);
+ usb->idle_hardware_channels |= (1<<channel);
+
+ /* Make sure this channel is tied to a valid pipe */
+ pipe = usb->pipe_for_channel[channel];
+ CVMX_PREFETCH(pipe, 0);
+ CVMX_PREFETCH(pipe, 128);
+ if (!pipe)
+ CVMX_USB_RETURN(0);
+ transaction = pipe->head;
+ CVMX_PREFETCH0(transaction);
+
+ /* Disconnect this pipe from the HW channel. Later the schedule function will
+ figure out which pipe needs to go */
+ usb->pipe_for_channel[channel] = NULL;
+ pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_SCHEDULED;
+
+ /* Read the channel config info so we can figure out how much data
+ transfered */
+ usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index));
+ usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
+
+ /* Calculating the number of bytes successfully transferred is dependent on
+ the transfer direction */
+ packets_processed = transaction->pktcnt - usbc_hctsiz.s.pktcnt;
+ if (usbc_hcchar.s.epdir) {
+ /* IN transactions are easy. For every byte received the hardware
+ decrements xfersize. All we need to do is subtract the current
+ value of xfersize from its starting value and we know how many
+ bytes were written to the buffer */
+ bytes_this_transfer = transaction->xfersize - usbc_hctsiz.s.xfersize;
+ }
+ else {
+ /* OUT transaction don't decrement xfersize. Instead pktcnt is
+ decremented on every successful packet send. The hardware does
+ this when it receives an ACK, or NYET. If it doesn't
+ receive one of these responses pktcnt doesn't change */
+ bytes_this_transfer = packets_processed * usbc_hcchar.s.mps;
+ /* The last packet may not be a full transfer if we didn't have
+ enough data */
+ if (bytes_this_transfer > transaction->xfersize)
+ bytes_this_transfer = transaction->xfersize;
+ }
+ /* Figure out how many bytes were in the last packet of the transfer */
+ if (packets_processed)
+ bytes_in_last_packet = bytes_this_transfer - (packets_processed-1) * usbc_hcchar.s.mps;
+ else
+ bytes_in_last_packet = bytes_this_transfer;
+
+ /* As a special case, setup transactions output the setup header, not
+ the user's data. For this reason we don't count setup data as bytes
+ transferred */
+ if ((transaction->stage == CVMX_USB_STAGE_SETUP) ||
+ (transaction->stage == CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE))
+ bytes_this_transfer = 0;
+
+ /* Optional debug output */
+ if (cvmx_unlikely((usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS) ||
+ (pipe->flags & CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS)))
+ cvmx_dprintf("%s: Channel %d halted. Pipe %d transaction %d stage %d bytes=%d\n",
+ __FUNCTION__, channel,
+ __cvmx_usb_get_pipe_handle(usb, pipe),
+ __cvmx_usb_get_submit_handle(usb, transaction),
+ transaction->stage, bytes_this_transfer);
+
+ /* Add the bytes transferred to the running total. It is important that
+ bytes_this_transfer doesn't count any data that needs to be
+ retransmitted */
+ transaction->actual_bytes += bytes_this_transfer;
+ if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)
+ buffer_space_left = transaction->iso_packets[0].length - transaction->actual_bytes;
+ else
+ buffer_space_left = transaction->buffer_length - transaction->actual_bytes;
+
+ /* We need to remember the PID toggle state for the next transaction. The
+ hardware already updated it for the next transaction */
+ pipe->pid_toggle = !(usbc_hctsiz.s.pid == 0);
+
+ /* For high speed bulk out, assume the next transaction will need to do a
+ ping before proceeding. If this isn't true the ACK processing below
+ will clear this flag */
+ if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
+ (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) &&
+ (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT))
+ pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
+
+ if (usbc_hcint.s.stall) {
+ /* STALL as a response means this transaction cannot be completed
+ because the device can't process transactions. Tell the user. Any
+ data that was transferred will be counted on the actual bytes
+ transferred */
+ pipe->pid_toggle = 0;
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_STALL);
+ }
+ else if (usbc_hcint.s.xacterr) {
+ /* We know at least one packet worked if we get a ACK or NAK. Reset the retry counter */
+ if (usbc_hcint.s.nak || usbc_hcint.s.ack)
+ transaction->retries = 0;
+ transaction->retries++;
+ if (transaction->retries > MAX_RETRIES) {
+ /* XactErr as a response means the device signaled something wrong with
+ the transfer. For example, PID toggle errors cause these */
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_XACTERR);
+ }
+ else {
+ /* If this was a split then clear our split in progress marker */
+ if (usb->active_split == transaction)
+ usb->active_split = NULL;
+ /* Rewind to the beginning of the transaction by anding off the
+ split complete bit */
+ transaction->stage &= ~1;
+ pipe->split_sc_frame = -1;
+ pipe->next_tx_frame += pipe->interval;
+ if (pipe->next_tx_frame < usb->frame_number)
+ pipe->next_tx_frame = usb->frame_number + pipe->interval -
+ (usb->frame_number - pipe->next_tx_frame) % pipe->interval;
+ }
+ }
+ else if (usbc_hcint.s.bblerr)
+ {
+ /* Babble Error (BblErr) */
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_BABBLEERR);
+ }
+ else if (usbc_hcint.s.datatglerr)
+ {
+ /* We'll retry the exact same transaction again */
+ transaction->retries++;
+ }
+ else if (usbc_hcint.s.nyet) {
+ /* NYET as a response is only allowed in three cases: as a response to
+ a ping, as a response to a split transaction, and as a response to
+ a bulk out. The ping case is handled by hardware, so we only have
+ splits and bulk out */
+ if (!__cvmx_usb_pipe_needs_split(usb, pipe)) {
+ transaction->retries = 0;
+ /* If there is more data to go then we need to try again. Otherwise
+ this transaction is complete */
+ if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet))
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ }
+ else {
+ /* Split transactions retry the split complete 4 times then rewind
+ to the start split and do the entire transactions again */
+ transaction->retries++;
+ if ((transaction->retries & 0x3) == 0) {
+ /* Rewind to the beginning of the transaction by anding off the
+ split complete bit */
+ transaction->stage &= ~1;
+ pipe->split_sc_frame = -1;
+ }
+ }
+ }
+ else if (usbc_hcint.s.ack) {
+ transaction->retries = 0;
+ /* The ACK bit can only be checked after the other error bits. This is
+ because a multi packet transfer may succeed in a number of packets
+ and then get a different response on the last packet. In this case
+ both ACK and the last response bit will be set. If none of the
+ other response bits is set, then the last packet must have been an
+ ACK */
+
+ /* Since we got an ACK, we know we don't need to do a ping on this
+ pipe */
+ pipe->flags &= ~__CVMX_USB_PIPE_FLAGS_NEED_PING;
+
+ switch (transaction->type)
+ {
+ case CVMX_USB_TRANSFER_CONTROL:
+ switch (transaction->stage)
+ {
+ case CVMX_USB_STAGE_NON_CONTROL:
+ case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE:
+ /* This should be impossible */
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR);
+ break;
+ case CVMX_USB_STAGE_SETUP:
+ pipe->pid_toggle = 1;
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ transaction->stage = CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE;
+ else {
+ cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header);
+ if (header->s.length)
+ transaction->stage = CVMX_USB_STAGE_DATA;
+ else
+ transaction->stage = CVMX_USB_STAGE_STATUS;
+ }
+ break;
+ case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE:
+ {
+ cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header);
+ if (header->s.length)
+ transaction->stage = CVMX_USB_STAGE_DATA;
+ else
+ transaction->stage = CVMX_USB_STAGE_STATUS;
+ }
+ break;
+ case CVMX_USB_STAGE_DATA:
+ if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+ transaction->stage = CVMX_USB_STAGE_DATA_SPLIT_COMPLETE;
+ /* For setup OUT data that are splits, the hardware
+ doesn't appear to count transferred data. Here
+ we manually update the data transferred */
+ if (!usbc_hcchar.s.epdir) {
+ if (buffer_space_left < pipe->max_packet)
+ transaction->actual_bytes += buffer_space_left;
+ else
+ transaction->actual_bytes += pipe->max_packet;
+ }
+ }
+ else if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) {
+ pipe->pid_toggle = 1;
+ transaction->stage = CVMX_USB_STAGE_STATUS;
+ }
+ break;
+ case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE:
+ if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) {
+ pipe->pid_toggle = 1;
+ transaction->stage = CVMX_USB_STAGE_STATUS;
+ }
+ else {
+ transaction->stage = CVMX_USB_STAGE_DATA;
+ }
+ break;
+ case CVMX_USB_STAGE_STATUS:
+ if (__cvmx_usb_pipe_needs_split(usb, pipe))
+ transaction->stage = CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE;
+ else
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ break;
+ case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE:
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ break;
+ }
+ break;
+ case CVMX_USB_TRANSFER_BULK:
+ case CVMX_USB_TRANSFER_INTERRUPT:
+ /* The only time a bulk transfer isn't complete when
+ it finishes with an ACK is during a split transaction. For
+ splits we need to continue the transfer if more data is
+ needed */
+ if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+ if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL)
+ transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
+ else {
+ if (buffer_space_left && (bytes_in_last_packet == pipe->max_packet))
+ transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
+ else {
+ if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT)
+ pipe->next_tx_frame += pipe->interval;
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ }
+ }
+ }
+ else {
+ if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) &&
+ (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) &&
+ (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) &&
+ (usbc_hcint.s.nak))
+ pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING;
+ if (!buffer_space_left || (bytes_in_last_packet < pipe->max_packet)) {
+ if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT)
+ pipe->next_tx_frame += pipe->interval;
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ }
+ }
+ break;
+ case CVMX_USB_TRANSFER_ISOCHRONOUS:
+ if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
+ /* ISOCHRONOUS OUT splits don't require a complete split stage.
+ Instead they use a sequence of begin OUT splits to transfer
+ the data 188 bytes at a time. Once the transfer is complete,
+ the pipe sleeps until the next schedule interval */
+ if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) {
+ /* If no space left or this wasn't a max size packet then
+ this transfer is complete. Otherwise start it again
+ to send the next 188 bytes */
+ if (!buffer_space_left || (bytes_this_transfer < 188)) {
+ pipe->next_tx_frame += pipe->interval;
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ }
+ }
+ else {
+ if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE) {
+ /* We are in the incoming data phase. Keep getting
+ data until we run out of space or get a small
+ packet */
+ if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) {
+ pipe->next_tx_frame += pipe->interval;
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ }
+ }
+ else
+ transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE;
+ }
+ }
+ else {
+ pipe->next_tx_frame += pipe->interval;
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS);
+ }
+ break;
+ }
+ }
+ else if (usbc_hcint.s.nak) {
+ /* If this was a split then clear our split in progress marker */
+ if (usb->active_split == transaction)
+ usb->active_split = NULL;
+ /* NAK as a response means the device couldn't accept the transaction,
+ but it should be retried in the future. Rewind to the beginning of
+ the transaction by anding off the split complete bit. Retry in the
+ next interval */
+ transaction->retries = 0;
+ transaction->stage &= ~1;
+ pipe->next_tx_frame += pipe->interval;
+ if (pipe->next_tx_frame < usb->frame_number)
+ pipe->next_tx_frame = usb->frame_number + pipe->interval -
+ (usb->frame_number - pipe->next_tx_frame) % pipe->interval;
+ }
+ else {
+ cvmx_usb_port_status_t port;
+ port = cvmx_usb_get_status((cvmx_usb_state_t *)usb);
+ if (port.port_enabled)
+ {
+ /* We'll retry the exact same transaction again */
+ transaction->retries++;
+ }
+ else
+ {
+ /* We get channel halted interrupts with no result bits sets when the
+ cable is unplugged */
+ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_ERROR);
+ }
+ }
+ CVMX_USB_RETURN(0);
+}
+
+
+/**
+ * Poll the USB block for status and call all needed callback
+ * handlers. This function is meant to be called in the interrupt
+ * handler for the USB controller. It can also be called
+ * periodically in a loop for non-interrupt based operation.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+cvmx_usb_status_t cvmx_usb_poll(cvmx_usb_state_t *state)
+{
+ cvmx_usbcx_hfnum_t usbc_hfnum;
+ cvmx_usbcx_gintsts_t usbc_gintsts;
+ cvmx_usb_internal_state_t *usb = (cvmx_usb_internal_state_t*)state;
+
+ CVMX_PREFETCH(usb, 0);
+ CVMX_PREFETCH(usb, 1*128);
+ CVMX_PREFETCH(usb, 2*128);
+ CVMX_PREFETCH(usb, 3*128);
+ CVMX_PREFETCH(usb, 4*128);
+
+ CVMX_USB_LOG_CALLED();
+ CVMX_USB_LOG_PARAM("%p", state);
+
+ /* Update the frame counter */
+ usbc_hfnum.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index));
+ if ((usb->frame_number&0x3fff) > usbc_hfnum.s.frnum)
+ usb->frame_number += 0x4000;
+ usb->frame_number &= ~0x3fffull;
+ usb->frame_number |= usbc_hfnum.s.frnum;
+
+ /* Read the pending interrupts */
+ usbc_gintsts.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GINTSTS(usb->index));
+
+ /* Clear the interrupts now that we know about them */
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index), usbc_gintsts.u32);
+
+ if (usbc_gintsts.s.rxflvl) {
+ /* RxFIFO Non-Empty (RxFLvl)
+ Indicates that there is at least one packet pending to be read
+ from the RxFIFO. */
+ /* In DMA mode this is handled by hardware */
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+ __cvmx_usb_poll_rx_fifo(usb);
+ }
+ if (usbc_gintsts.s.ptxfemp || usbc_gintsts.s.nptxfemp) {
+ /* Fill the Tx FIFOs when not in DMA mode */
+ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
+ __cvmx_usb_poll_tx_fifo(usb);
+ }
+ if (usbc_gintsts.s.disconnint || usbc_gintsts.s.prtint) {
+ cvmx_usbcx_hprt_t usbc_hprt;
+ /* Disconnect Detected Interrupt (DisconnInt)
+ Asserted when a device disconnect is detected. */
+
+ /* Host Port Interrupt (PrtInt)
+ The core sets this bit to indicate a change in port status of one
+ of the O2P USB core ports in Host mode. The application must
+ read the Host Port Control and Status (HPRT) register to
+ determine the exact event that caused this interrupt. The
+ application must clear the appropriate status bit in the Host Port
+ Control and Status register to clear this bit. */
+
+ /* Call the user's port callback */
+ __cvmx_usb_perform_callback(usb, NULL, NULL,
+ CVMX_USB_CALLBACK_PORT_CHANGED,
+ CVMX_USB_COMPLETE_SUCCESS);
+ /* Clear the port change bits */
+ usbc_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
+ usbc_hprt.s.prtena = 0;
+ __cvmx_usb_write_csr32(usb, CVMX_USBCX_HPRT(usb->index), usbc_hprt.u32);
+ }
+ if (usbc_gintsts.s.hchint) {
+ /* Host Channels Interrupt (HChInt)
+ The core sets this bit to indicate that an interrupt is pending on
+ one of the channels of the core (in Host mode). The application
+ must read the Host All Channels Interrupt (HAINT) register to
+ determine the exact number of the channel on which the
+ interrupt occurred, and then read the corresponding Host
+ Channel-n Interrupt (HCINTn) register to determine the exact
+ cause of the interrupt. The application must clear the
+ appropriate status bit in the HCINTn register to clear this bit. */
+ cvmx_usbcx_haint_t usbc_haint;
+ usbc_haint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINT(usb->index));
+ while (usbc_haint.u32) {
+ int channel;
+ CVMX_CLZ(channel, usbc_haint.u32);
+ channel = 31 - channel;
+ __cvmx_usb_poll_channel(usb, channel);
+ usbc_haint.u32 ^= 1<<channel;
+ }
+ }
+
+ __cvmx_usb_schedule(usb, usbc_gintsts.s.sof);
+
+ CVMX_USB_RETURN(CVMX_USB_SUCCESS);
+}
--- /dev/null
+/***********************license start***************
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+
+ * * Neither the name of Cavium Networks nor the names of
+ * its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written
+ * permission.
+
+ * This Software, including technical data, may be subject to U.S. export control
+ * laws, including the U.S. Export Administration Act and its associated
+ * regulations, and may be subject to export or import regulations in other
+ * countries.
+
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+ * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
+ * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
+ * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
+ * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+ ***********************license end**************************************/
+
+
+/**
+ * @file
+ *
+ * "cvmx-usb.h" defines a set of low level USB functions to help
+ * developers create Octeon USB drivers for various operating
+ * systems. These functions provide a generic API to the Octeon
+ * USB blocks, hiding the internal hardware specific
+ * operations.
+ *
+ * At a high level the device driver needs to:
+ *
+ * -# Call cvmx_usb_get_num_ports() to get the number of
+ * supported ports.
+ * -# Call cvmx_usb_initialize() for each Octeon USB port.
+ * -# Enable the port using cvmx_usb_enable().
+ * -# Either periodically, or in an interrupt handler, call
+ * cvmx_usb_poll() to service USB events.
+ * -# Manage pipes using cvmx_usb_open_pipe() and
+ * cvmx_usb_close_pipe().
+ * -# Manage transfers using cvmx_usb_submit_*() and
+ * cvmx_usb_cancel*().
+ * -# Shutdown USB on unload using cvmx_usb_shutdown().
+ *
+ * To monitor USB status changes, the device driver must use
+ * cvmx_usb_register_callback() to register for events that it
+ * is interested in. Below are a few hints on successfully
+ * implementing a driver on top of this API.
+ *
+ * <h2>Initialization</h2>
+ *
+ * When a driver is first loaded, it is normally not necessary
+ * to bring up the USB port completely. Most operating systems
+ * expect to initialize and enable the port in two independent
+ * steps. Normally an operating system will probe hardware,
+ * initialize anything found, and then enable the hardware.
+ *
+ * In the probe phase you should:
+ * -# Use cvmx_usb_get_num_ports() to determine the number of
+ * USB port to be supported.
+ * -# Allocate space for a cvmx_usb_state_t structure for each
+ * port.
+ * -# Tell the operating system about each port
+ *
+ * In the initialization phase you should:
+ * -# Use cvmx_usb_initialize() on each port.
+ * -# Do not call cvmx_usb_enable(). This leaves the USB port in
+ * the disabled state until the operating system is ready.
+ *
+ * Finally, in the enable phase you should:
+ * -# Call cvmx_usb_enable() on the appropriate port.
+ * -# Note that some operating system use a RESET instead of an
+ * enable call. To implement RESET, you should call
+ * cvmx_usb_disable() followed by cvmx_usb_enable().
+ *
+ * <h2>Locking</h2>
+ *
+ * All of the functions in the cvmx-usb API assume exclusive
+ * access to the USB hardware and internal data structures. This
+ * means that the driver must provide locking as necessary.
+ *
+ * In the single CPU state it is normally enough to disable
+ * interrupts before every call to cvmx_usb*() and enable them
+ * again after the call is complete. Keep in mind that it is
+ * very common for the callback handlers to make additional
+ * calls into cvmx-usb, so the disable/enable must be protected
+ * against recursion. As an example, the Linux kernel
+ * local_irq_save() and local_irq_restore() are perfect for this
+ * in the non SMP case.
+ *
+ * In the SMP case, locking is more complicated. For SMP you not
+ * only need to disable interrupts on the local core, but also
+ * take a lock to make sure that another core cannot call
+ * cvmx-usb.
+ *
+ * <h2>Port callback</h2>
+ *
+ * The port callback prototype needs to look as follows:
+ *
+ * void port_callback(cvmx_usb_state_t *usb,
+ * cvmx_usb_callback_t reason,
+ * cvmx_usb_complete_t status,
+ * int pipe_handle,
+ * int submit_handle,
+ * int bytes_transferred,
+ * void *user_data);
+ * - @b usb is the cvmx_usb_state_t for the port.
+ * - @b reason will always be
+ * CVMX_USB_CALLBACK_PORT_CHANGED.
+ * - @b status will always be CVMX_USB_COMPLETE_SUCCESS.
+ * - @b pipe_handle will always be -1.
+ * - @b submit_handle will always be -1.
+ * - @b bytes_transferred will always be 0.
+ * - @b user_data is the void pointer originally passed along
+ * with the callback. Use this for any state information you
+ * need.
+ *
+ * The port callback will be called whenever the user plugs /
+ * unplugs a device from the port. It will not be called when a
+ * device is plugged / unplugged from a hub connected to the
+ * root port. Normally all the callback needs to do is tell the
+ * operating system to poll the root hub for status. Under
+ * Linux, this is performed by calling usb_hcd_poll_rh_status().
+ * In the Linux driver we use @b user_data. to pass around the
+ * Linux "hcd" structure. Once the port callback completes,
+ * Linux automatically calls octeon_usb_hub_status_data() which
+ * uses cvmx_usb_get_status() to determine the root port status.
+ *
+ * <h2>Complete callback</h2>
+ *
+ * The completion callback prototype needs to look as follows:
+ *
+ * void complete_callback(cvmx_usb_state_t *usb,
+ * cvmx_usb_callback_t reason,
+ * cvmx_usb_complete_t status,
+ * int pipe_handle,
+ * int submit_handle,
+ * int bytes_transferred,
+ * void *user_data);
+ * - @b usb is the cvmx_usb_state_t for the port.
+ * - @b reason will always be
+ * CVMX_USB_CALLBACK_TRANSFER_COMPLETE.
+ * - @b status will be one of the cvmx_usb_complete_t
+ * enumerations.
+ * - @b pipe_handle is the handle to the pipe the transaction
+ * was originally submitted on.
+ * - @b submit_handle is the handle returned by the original
+ * cvmx_usb_submit_* call.
+ * - @b bytes_transferred is the number of bytes successfully
+ * transferred in the transaction. This will be zero on most
+ * error conditions.
+ * - @b user_data is the void pointer originally passed along
+ * with the callback. Use this for any state information you
+ * need. For example, the Linux "urb" is stored in here in the
+ * Linux driver.
+ *
+ * In general your callback handler should use @b status and @b
+ * bytes_transferred to tell the operating system the how the
+ * transaction completed. Normally the pipe is not changed in
+ * this callback.
+ *
+ * <h2>Canceling transactions</h2>
+ *
+ * When a transaction is cancelled using cvmx_usb_cancel*(), the
+ * actual length of time until the complete callback is called
+ * can vary greatly. It may be called before cvmx_usb_cancel*()
+ * returns, or it may be called a number of usb frames in the
+ * future once the hardware frees the transaction. In either of
+ * these cases, the complete handler will receive
+ * CVMX_USB_COMPLETE_CANCEL.
+ *
+ * <h2>Handling pipes</h2>
+ *
+ * USB "pipes" is a software construct created by this API to
+ * enable the ordering of usb transactions to a device endpoint.
+ * Octeon's underlying hardware doesn't have any concept
+ * equivalent to "pipes". The hardware instead has eight
+ * channels that can be used simultaneously to have up to eight
+ * transaction in process at the same time. In order to maintain
+ * ordering in a pipe, the transactions for a pipe will only be
+ * active in one hardware channel at a time. From an API user's
+ * perspective, this doesn't matter but it can be helpful to
+ * keep this in mind when you are probing hardware while
+ * debugging.
+ *
+ * Also keep in mind that usb transactions contain state
+ * information about the previous transaction to the same
+ * endpoint. Each transaction has a PID toggle that changes 0/1
+ * between each sub packet. This is maintained in the pipe data
+ * structures. For this reason, you generally cannot create and
+ * destroy a pipe for every transaction. A sequence of
+ * transaction to the same endpoint must use the same pipe.
+ *
+ * <h2>Root Hub</h2>
+ *
+ * Some operating systems view the usb root port as a normal usb
+ * hub. These systems attempt to control the root hub with
+ * messages similar to the usb 2.0 spec for hub control and
+ * status. For these systems it may be necessary to write
+ * function to decode standard usb control messages into
+ * equivalent cvmx-usb API calls. As an example, the following
+ * code is used under Linux for some of the basic hub control
+ * messages.
+ *
+ * @code
+ * static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength)
+ * {
+ * cvmx_usb_state_t *usb = (cvmx_usb_state_t *)hcd->hcd_priv;
+ * cvmx_usb_port_status_t usb_port_status;
+ * int port_status;
+ * struct usb_hub_descriptor *desc;
+ * unsigned long flags;
+ *
+ * switch (typeReq)
+ * {
+ * case ClearHubFeature:
+ * DEBUG_ROOT_HUB("OcteonUSB: ClearHubFeature\n");
+ * switch (wValue)
+ * {
+ * case C_HUB_LOCAL_POWER:
+ * case C_HUB_OVER_CURRENT:
+ * // Nothing required here
+ * break;
+ * default:
+ * return -EINVAL;
+ * }
+ * break;
+ * case ClearPortFeature:
+ * DEBUG_ROOT_HUB("OcteonUSB: ClearPortFeature");
+ * if (wIndex != 1)
+ * {
+ * DEBUG_ROOT_HUB(" INVALID\n");
+ * return -EINVAL;
+ * }
+ *
+ * switch (wValue)
+ * {
+ * case USB_PORT_FEAT_ENABLE:
+ * DEBUG_ROOT_HUB(" ENABLE");
+ * local_irq_save(flags);
+ * cvmx_usb_disable(usb);
+ * local_irq_restore(flags);
+ * break;
+ * case USB_PORT_FEAT_SUSPEND:
+ * DEBUG_ROOT_HUB(" SUSPEND");
+ * // Not supported on Octeon
+ * break;
+ * case USB_PORT_FEAT_POWER:
+ * DEBUG_ROOT_HUB(" POWER");
+ * // Not supported on Octeon
+ * break;
+ * case USB_PORT_FEAT_INDICATOR:
+ * DEBUG_ROOT_HUB(" INDICATOR");
+ * // Port inidicator not supported
+ * break;
+ * case USB_PORT_FEAT_C_CONNECTION:
+ * DEBUG_ROOT_HUB(" C_CONNECTION");
+ * // Clears drivers internal connect status change flag
+ * cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
+ * break;
+ * case USB_PORT_FEAT_C_RESET:
+ * DEBUG_ROOT_HUB(" C_RESET");
+ * // Clears the driver's internal Port Reset Change flag
+ * cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
+ * break;
+ * case USB_PORT_FEAT_C_ENABLE:
+ * DEBUG_ROOT_HUB(" C_ENABLE");
+ * // Clears the driver's internal Port Enable/Disable Change flag
+ * cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
+ * break;
+ * case USB_PORT_FEAT_C_SUSPEND:
+ * DEBUG_ROOT_HUB(" C_SUSPEND");
+ * // Clears the driver's internal Port Suspend Change flag,
+ * which is set when resume signaling on the host port is
+ * complete
+ * break;
+ * case USB_PORT_FEAT_C_OVER_CURRENT:
+ * DEBUG_ROOT_HUB(" C_OVER_CURRENT");
+ * // Clears the driver's overcurrent Change flag
+ * cvmx_usb_set_status(usb, cvmx_usb_get_status(usb));
+ * break;
+ * default:
+ * DEBUG_ROOT_HUB(" UNKNOWN\n");
+ * return -EINVAL;
+ * }
+ * DEBUG_ROOT_HUB("\n");
+ * break;
+ * case GetHubDescriptor:
+ * DEBUG_ROOT_HUB("OcteonUSB: GetHubDescriptor\n");
+ * desc = (struct usb_hub_descriptor *)buf;
+ * desc->bDescLength = 9;
+ * desc->bDescriptorType = 0x29;
+ * desc->bNbrPorts = 1;
+ * desc->wHubCharacteristics = 0x08;
+ * desc->bPwrOn2PwrGood = 1;
+ * desc->bHubContrCurrent = 0;
+ * desc->bitmap[0] = 0;
+ * desc->bitmap[1] = 0xff;
+ * break;
+ * case GetHubStatus:
+ * DEBUG_ROOT_HUB("OcteonUSB: GetHubStatus\n");
+ * *(__le32 *)buf = 0;
+ * break;
+ * case GetPortStatus:
+ * DEBUG_ROOT_HUB("OcteonUSB: GetPortStatus");
+ * if (wIndex != 1)
+ * {
+ * DEBUG_ROOT_HUB(" INVALID\n");
+ * return -EINVAL;
+ * }
+ *
+ * usb_port_status = cvmx_usb_get_status(usb);
+ * port_status = 0;
+ *
+ * if (usb_port_status.connect_change)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
+ * DEBUG_ROOT_HUB(" C_CONNECTION");
+ * }
+ *
+ * if (usb_port_status.port_enabled)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
+ * DEBUG_ROOT_HUB(" C_ENABLE");
+ * }
+ *
+ * if (usb_port_status.connected)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_CONNECTION);
+ * DEBUG_ROOT_HUB(" CONNECTION");
+ * }
+ *
+ * if (usb_port_status.port_enabled)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_ENABLE);
+ * DEBUG_ROOT_HUB(" ENABLE");
+ * }
+ *
+ * if (usb_port_status.port_over_current)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
+ * DEBUG_ROOT_HUB(" OVER_CURRENT");
+ * }
+ *
+ * if (usb_port_status.port_powered)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_POWER);
+ * DEBUG_ROOT_HUB(" POWER");
+ * }
+ *
+ * if (usb_port_status.port_speed == CVMX_USB_SPEED_HIGH)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_HIGHSPEED);
+ * DEBUG_ROOT_HUB(" HIGHSPEED");
+ * }
+ * else if (usb_port_status.port_speed == CVMX_USB_SPEED_LOW)
+ * {
+ * port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
+ * DEBUG_ROOT_HUB(" LOWSPEED");
+ * }
+ *
+ * *((__le32 *)buf) = cpu_to_le32(port_status);
+ * DEBUG_ROOT_HUB("\n");
+ * break;
+ * case SetHubFeature:
+ * DEBUG_ROOT_HUB("OcteonUSB: SetHubFeature\n");
+ * // No HUB features supported
+ * break;
+ * case SetPortFeature:
+ * DEBUG_ROOT_HUB("OcteonUSB: SetPortFeature");
+ * if (wIndex != 1)
+ * {
+ * DEBUG_ROOT_HUB(" INVALID\n");
+ * return -EINVAL;
+ * }
+ *
+ * switch (wValue)
+ * {
+ * case USB_PORT_FEAT_SUSPEND:
+ * DEBUG_ROOT_HUB(" SUSPEND\n");
+ * return -EINVAL;
+ * case USB_PORT_FEAT_POWER:
+ * DEBUG_ROOT_HUB(" POWER\n");
+ * return -EINVAL;
+ * case USB_PORT_FEAT_RESET:
+ * DEBUG_ROOT_HUB(" RESET\n");
+ * local_irq_save(flags);
+ * cvmx_usb_disable(usb);
+ * if (cvmx_usb_enable(usb))
+ * DEBUG_ERROR("Failed to enable the port\n");
+ * local_irq_restore(flags);
+ * return 0;
+ * case USB_PORT_FEAT_INDICATOR:
+ * DEBUG_ROOT_HUB(" INDICATOR\n");
+ * // Not supported
+ * break;
+ * default:
+ * DEBUG_ROOT_HUB(" UNKNOWN\n");
+ * return -EINVAL;
+ * }
+ * break;
+ * default:
+ * DEBUG_ROOT_HUB("OcteonUSB: Unknown root hub request\n");
+ * return -EINVAL;
+ * }
+ * return 0;
+ * }
+ * @endcode
+ *
+ * <h2>Interrupts</h2>
+ *
+ * If you plan on using usb interrupts, cvmx_usb_poll() must be
+ * called on every usb interrupt. It will read the usb state,
+ * call any needed callbacks, and schedule transactions as
+ * needed. Your device driver needs only to hookup an interrupt
+ * handler and call cvmx_usb_poll(). Octeon's usb port 0 causes
+ * CIU bit CIU_INT*_SUM0[USB] to be set (bit 56). For port 1,
+ * CIU bit CIU_INT_SUM1[USB1] is set (bit 17). How these bits
+ * are turned into interrupt numbers is operating system
+ * specific. For Linux, there are the convenient defines
+ * OCTEON_IRQ_USB0 and OCTEON_IRQ_USB1 for the IRQ numbers.
+ *
+ * If you aren't using interrupts, simple call cvmx_usb_poll()
+ * in your main processing loop.
+ *
+ * <hr>$Revision: 32636 $<hr>
+ */
+
+#ifndef __CVMX_USB_H__
+#define __CVMX_USB_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Enumerations representing the status of function calls.
+ */
+typedef enum
+{
+ CVMX_USB_SUCCESS = 0, /**< There were no errors */
+ CVMX_USB_INVALID_PARAM = -1, /**< A parameter to the function was invalid */
+ CVMX_USB_NO_MEMORY = -2, /**< Insufficient resources were available for the request */
+ CVMX_USB_BUSY = -3, /**< The resource is busy and cannot service the request */
+ CVMX_USB_TIMEOUT = -4, /**< Waiting for an action timed out */
+ CVMX_USB_INCORRECT_MODE = -5, /**< The function call doesn't work in the current USB
+ mode. This happens when host only functions are
+ called in device mode or vice versa */
+} cvmx_usb_status_t;
+
+/**
+ * Enumerations representing the possible USB device speeds
+ */
+typedef enum
+{
+ CVMX_USB_SPEED_HIGH = 0, /**< Device is operation at 480Mbps */
+ CVMX_USB_SPEED_FULL = 1, /**< Device is operation at 12Mbps */
+ CVMX_USB_SPEED_LOW = 2, /**< Device is operation at 1.5Mbps */
+} cvmx_usb_speed_t;
+
+/**
+ * Enumeration representing the possible USB transfer types.
+ */
+typedef enum
+{
+ CVMX_USB_TRANSFER_CONTROL = 0, /**< USB transfer type control for hub and status transfers */
+ CVMX_USB_TRANSFER_ISOCHRONOUS = 1, /**< USB transfer type isochronous for low priority periodic transfers */
+ CVMX_USB_TRANSFER_BULK = 2, /**< USB transfer type bulk for large low priority transfers */
+ CVMX_USB_TRANSFER_INTERRUPT = 3, /**< USB transfer type interrupt for high priority periodic transfers */
+} cvmx_usb_transfer_t;
+
+/**
+ * Enumeration of the transfer directions
+ */
+typedef enum
+{
+ CVMX_USB_DIRECTION_OUT, /**< Data is transferring from Octeon to the device/host */
+ CVMX_USB_DIRECTION_IN, /**< Data is transferring from the device/host to Octeon */
+} cvmx_usb_direction_t;
+
+/**
+ * Enumeration of all possible status codes passed to callback
+ * functions.
+ */
+typedef enum
+{
+ CVMX_USB_COMPLETE_SUCCESS, /**< The transaction / operation finished without any errors */
+ CVMX_USB_COMPLETE_SHORT, /**< FIXME: This is currently not implemented */
+ CVMX_USB_COMPLETE_CANCEL, /**< The transaction was canceled while in flight by a user call to cvmx_usb_cancel* */
+ CVMX_USB_COMPLETE_ERROR, /**< The transaction aborted with an unexpected error status */
+ CVMX_USB_COMPLETE_STALL, /**< The transaction received a USB STALL response from the device */
+ CVMX_USB_COMPLETE_XACTERR, /**< The transaction failed with an error from the device even after a number of retries */
+ CVMX_USB_COMPLETE_DATATGLERR, /**< The transaction failed with a data toggle error even after a number of retries */
+ CVMX_USB_COMPLETE_BABBLEERR, /**< The transaction failed with a babble error */
+ CVMX_USB_COMPLETE_FRAMEERR, /**< The transaction failed with a frame error even after a number of retries */
+} cvmx_usb_complete_t;
+
+/**
+ * Structure returned containing the USB port status information.
+ */
+typedef struct
+{
+ uint32_t reserved : 25;
+ uint32_t port_enabled : 1; /**< 1 = Usb port is enabled, 0 = disabled */
+ uint32_t port_over_current : 1; /**< 1 = Over current detected, 0 = Over current not detected. Octeon doesn't support over current detection */
+ uint32_t port_powered : 1; /**< 1 = Port power is being supplied to the device, 0 = power is off. Octeon doesn't support turning port power off */
+ cvmx_usb_speed_t port_speed : 2; /**< Current port speed */
+ uint32_t connected : 1; /**< 1 = A device is connected to the port, 0 = No device is connected */
+ uint32_t connect_change : 1; /**< 1 = Device connected state changed since the last set status call */
+} cvmx_usb_port_status_t;
+
+/**
+ * This is the structure of a Control packet header
+ */
+typedef union
+{
+ uint64_t u64;
+ struct
+ {
+ uint64_t request_type : 8; /**< Bit 7 tells the direction: 1=IN, 0=OUT */
+ uint64_t request : 8; /**< The standard usb request to make */
+ uint64_t value : 16; /**< Value parameter for the request in little endian format */
+ uint64_t index : 16; /**< Index for the request in little endian format */
+ uint64_t length : 16; /**< Length of the data associated with this request in little endian format */
+ } s;
+} cvmx_usb_control_header_t;
+
+/**
+ * Descriptor for Isochronous packets
+ */
+typedef struct
+{
+ int offset; /**< This is the offset in bytes into the main buffer where this data is stored */
+ int length; /**< This is the length in bytes of the data */
+ cvmx_usb_complete_t status; /**< This is the status of this individual packet transfer */
+} cvmx_usb_iso_packet_t;
+
+/**
+ * Possible callback reasons for the USB API.
+ */
+typedef enum
+{
+ CVMX_USB_CALLBACK_TRANSFER_COMPLETE,
+ /**< A callback of this type is called when a submitted transfer
+ completes. The completion callback will be called even if the
+ transfer fails or is canceled. The status parameter will
+ contain details of why he callback was called. */
+ CVMX_USB_CALLBACK_PORT_CHANGED, /**< The status of the port changed. For example, someone may have
+ plugged a device in. The status parameter contains
+ CVMX_USB_COMPLETE_SUCCESS. Use cvmx_usb_get_status() to get
+ the new port status. */
+ __CVMX_USB_CALLBACK_END /**< Do not use. Used internally for array bounds */
+} cvmx_usb_callback_t;
+
+/**
+ * USB state internal data. The contents of this structure
+ * may change in future SDKs. No data in it should be referenced
+ * by user's of this API.
+ */
+typedef struct
+{
+ char data[65536];
+} cvmx_usb_state_t;
+
+/**
+ * USB callback functions are always of the following type.
+ * The parameters are as follows:
+ * - state = USB device state populated by
+ * cvmx_usb_initialize().
+ * - reason = The cvmx_usb_callback_t used to register
+ * the callback.
+ * - status = The cvmx_usb_complete_t representing the
+ * status code of a transaction.
+ * - pipe_handle = The Pipe that caused this callback, or
+ * -1 if this callback wasn't associated with a pipe.
+ * - submit_handle = Transfer submit handle causing this
+ * callback, or -1 if this callback wasn't associated
+ * with a transfer.
+ * - Actual number of bytes transfer.
+ * - user_data = The user pointer supplied to the
+ * function cvmx_usb_submit() or
+ * cvmx_usb_register_callback() */
+typedef void (*cvmx_usb_callback_func_t)(cvmx_usb_state_t *state,
+ cvmx_usb_callback_t reason,
+ cvmx_usb_complete_t status,
+ int pipe_handle, int submit_handle,
+ int bytes_transferred, void *user_data);
+
+/**
+ * Flags to pass the initialization function.
+ */
+typedef enum
+{
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI = 1<<0, /**< The USB port uses a 12MHz crystal as clock source
+ at USB_XO and USB_XI. */
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND = 1<<1, /**< The USB port uses 12/24/48MHz 2.5V board clock
+ source at USB_XO. USB_XI should be tied to GND.*/
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_AUTO = 0, /**< Automatically determine clock type based on function
+ in cvmx-helper-board.c. */
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK = 3<<3, /**< Mask for clock speed field */
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ = 1<<3, /**< Speed of reference clock or crystal */
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ = 2<<3, /**< Speed of reference clock */
+ CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ = 3<<3, /**< Speed of reference clock */
+ /* Bits 3-4 used to encode the clock frequency */
+ CVMX_USB_INITIALIZE_FLAGS_NO_DMA = 1<<5, /**< Disable DMA and used polled IO for data transfer use for the USB */
+ CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS = 1<<16, /**< Enable extra console output for debugging USB transfers */
+ CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLBACKS = 1<<17, /**< Enable extra console output for debugging USB callbacks */
+ CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO = 1<<18, /**< Enable extra console output for USB informational data */
+ CVMX_USB_INITIALIZE_FLAGS_DEBUG_CALLS = 1<<19, /**< Enable extra console output for every function call */
+ CVMX_USB_INITIALIZE_FLAGS_DEBUG_CSRS = 1<<20, /**< Enable extra console output for every CSR access */
+ CVMX_USB_INITIALIZE_FLAGS_DEBUG_ALL = ((CVMX_USB_INITIALIZE_FLAGS_DEBUG_CSRS<<1)-1) - (CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS-1),
+} cvmx_usb_initialize_flags_t;
+
+/**
+ * Flags for passing when a pipe is created. Currently no flags
+ * need to be passed.
+ */
+typedef enum
+{
+ CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS = 1<<15,/**< Used to display CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS for a specific pipe only */
+ __CVMX_USB_PIPE_FLAGS_OPEN = 1<<16, /**< Used internally to determine if a pipe is open. Do not use */
+ __CVMX_USB_PIPE_FLAGS_SCHEDULED = 1<<17, /**< Used internally to determine if a pipe is actively using hardware. Do not use */
+ __CVMX_USB_PIPE_FLAGS_NEED_PING = 1<<18, /**< Used internally to determine if a high speed pipe is in the ping state. Do not use */
+} cvmx_usb_pipe_flags_t;
+
+/**
+ * Return the number of USB ports supported by this Octeon
+ * chip. If the chip doesn't support USB, or is not supported
+ * by this API, a zero will be returned. Most Octeon chips
+ * support one usb port, but some support two ports.
+ * cvmx_usb_initialize() must be called on independent
+ * cvmx_usb_state_t structures.
+ *
+ * @return Number of port, zero if usb isn't supported
+ */
+extern int cvmx_usb_get_num_ports(void);
+
+/**
+ * Initialize a USB port for use. This must be called before any
+ * other access to the Octeon USB port is made. The port starts
+ * off in the disabled state.
+ *
+ * @param state Pointer to an empty cvmx_usb_state_t structure
+ * that will be populated by the initialize call.
+ * This structure is then passed to all other USB
+ * functions.
+ * @param usb_port_number
+ * Which Octeon USB port to initialize.
+ * @param flags Flags to control hardware initialization. See
+ * cvmx_usb_initialize_flags_t for the flag
+ * definitions. Some flags are mandatory.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_initialize(cvmx_usb_state_t *state,
+ int usb_port_number,
+ cvmx_usb_initialize_flags_t flags);
+
+/**
+ * Shutdown a USB port after a call to cvmx_usb_initialize().
+ * The port should be disabled with all pipes closed when this
+ * function is called.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_shutdown(cvmx_usb_state_t *state);
+
+/**
+ * Enable a USB port. After this call succeeds, the USB port is
+ * online and servicing requests.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_enable(cvmx_usb_state_t *state);
+
+/**
+ * Disable a USB port. After this call the USB port will not
+ * generate data transfers and will not generate events.
+ * Transactions in process will fail and call their
+ * associated callbacks.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_disable(cvmx_usb_state_t *state);
+
+/**
+ * Get the current state of the USB port. Use this call to
+ * determine if the usb port has anything connected, is enabled,
+ * or has some sort of error condition. The return value of this
+ * call has "changed" bits to signal of the value of some fields
+ * have changed between calls. These "changed" fields are based
+ * on the last call to cvmx_usb_set_status(). In order to clear
+ * them, you must update the status through cvmx_usb_set_status().
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return Port status information
+ */
+extern cvmx_usb_port_status_t cvmx_usb_get_status(cvmx_usb_state_t *state);
+
+/**
+ * Set the current state of the USB port. The status is used as
+ * a reference for the "changed" bits returned by
+ * cvmx_usb_get_status(). Other than serving as a reference, the
+ * status passed to this function is not used. No fields can be
+ * changed through this call.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param port_status
+ * Port status to set, most like returned by cvmx_usb_get_status()
+ */
+extern void cvmx_usb_set_status(cvmx_usb_state_t *state, cvmx_usb_port_status_t port_status);
+
+/**
+ * Open a virtual pipe between the host and a USB device. A pipe
+ * must be opened before data can be transferred between a device
+ * and Octeon.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param flags Optional pipe flags defined in
+ * cvmx_usb_pipe_flags_t.
+ * @param device_addr
+ * USB device address to open the pipe to
+ * (0-127).
+ * @param endpoint_num
+ * USB endpoint number to open the pipe to
+ * (0-15).
+ * @param device_speed
+ * The speed of the device the pipe is going
+ * to. This must match the device's speed,
+ * which may be different than the port speed.
+ * @param max_packet The maximum packet length the device can
+ * transmit/receive (low speed=0-8, full
+ * speed=0-1023, high speed=0-1024). This value
+ * comes from the standard endpoint descriptor
+ * field wMaxPacketSize bits <10:0>.
+ * @param transfer_type
+ * The type of transfer this pipe is for.
+ * @param transfer_dir
+ * The direction the pipe is in. This is not
+ * used for control pipes.
+ * @param interval For ISOCHRONOUS and INTERRUPT transfers,
+ * this is how often the transfer is scheduled
+ * for. All other transfers should specify
+ * zero. The units are in frames (8000/sec at
+ * high speed, 1000/sec for full speed).
+ * @param multi_count
+ * For high speed devices, this is the maximum
+ * allowed number of packet per microframe.
+ * Specify zero for non high speed devices. This
+ * value comes from the standard endpoint descriptor
+ * field wMaxPacketSize bits <12:11>.
+ * @param hub_device_addr
+ * Hub device address this device is connected
+ * to. Devices connected directly to Octeon
+ * use zero. This is only used when the device
+ * is full/low speed behind a high speed hub.
+ * The address will be of the high speed hub,
+ * not and full speed hubs after it.
+ * @param hub_port Which port on the hub the device is
+ * connected. Use zero for devices connected
+ * directly to Octeon. Like hub_device_addr,
+ * this is only used for full/low speed
+ * devices behind a high speed hub.
+ *
+ * @return A non negative value is a pipe handle. Negative
+ * values are failure codes from cvmx_usb_status_t.
+ */
+extern int cvmx_usb_open_pipe(cvmx_usb_state_t *state,
+ cvmx_usb_pipe_flags_t flags,
+ int device_addr, int endpoint_num,
+ cvmx_usb_speed_t device_speed, int max_packet,
+ cvmx_usb_transfer_t transfer_type,
+ cvmx_usb_direction_t transfer_dir, int interval,
+ int multi_count, int hub_device_addr,
+ int hub_port);
+
+/**
+ * Call to submit a USB Bulk transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+extern int cvmx_usb_submit_bulk(cvmx_usb_state_t *state, int pipe_handle,
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data);
+
+/**
+ * Call to submit a USB Interrupt transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+extern int cvmx_usb_submit_interrupt(cvmx_usb_state_t *state, int pipe_handle,
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data);
+
+/**
+ * Call to submit a USB Control transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param control_header
+ * USB 8 byte control header physical address.
+ * Note that this is NOT A POINTER, but the
+ * full 64bit physical address of the buffer.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+extern int cvmx_usb_submit_control(cvmx_usb_state_t *state, int pipe_handle,
+ uint64_t control_header,
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data);
+
+/**
+ * Flags to pass the cvmx_usb_submit_isochronous() function.
+ */
+typedef enum
+{
+ CVMX_USB_ISOCHRONOUS_FLAGS_ALLOW_SHORT = 1<<0, /**< Do not return an error if a transfer is less than the maximum packet size of the device */
+ CVMX_USB_ISOCHRONOUS_FLAGS_ASAP = 1<<1, /**< Schedule the transaction as soon as possible */
+} cvmx_usb_isochronous_flags_t;
+
+/**
+ * Call to submit a USB Isochronous transfer to a pipe.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Handle to the pipe for the transfer.
+ * @param start_frame
+ * Number of frames into the future to schedule
+ * this transaction.
+ * @param flags Flags to control the transfer. See
+ * cvmx_usb_isochronous_flags_t for the flag
+ * definitions.
+ * @param number_packets
+ * Number of sequential packets to transfer.
+ * "packets" is a pointer to an array of this
+ * many packet structures.
+ * @param packets Description of each transfer packet as
+ * defined by cvmx_usb_iso_packet_t. The array
+ * pointed to here must stay valid until the
+ * complete callback is called.
+ * @param buffer Physical address of the data buffer in
+ * memory. Note that this is NOT A POINTER, but
+ * the full 64bit physical address of the
+ * buffer. This may be zero if buffer_length is
+ * zero.
+ * @param buffer_length
+ * Length of buffer in bytes.
+ * @param callback Function to call when this transaction
+ * completes. If the return value of this
+ * function isn't an error, then this function
+ * is guaranteed to be called when the
+ * transaction completes. If this parameter is
+ * NULL, then the generic callback registered
+ * through cvmx_usb_register_callback is
+ * called. If both are NULL, then there is no
+ * way to know when a transaction completes.
+ * @param user_data User supplied data returned when the
+ * callback is called. This is only used if
+ * callback in not NULL.
+ *
+ * @return A submitted transaction handle or negative on
+ * failure. Negative values are failure codes from
+ * cvmx_usb_status_t.
+ */
+extern int cvmx_usb_submit_isochronous(cvmx_usb_state_t *state, int pipe_handle,
+ int start_frame, int flags,
+ int number_packets,
+ cvmx_usb_iso_packet_t packets[],
+ uint64_t buffer, int buffer_length,
+ cvmx_usb_callback_func_t callback,
+ void *user_data);
+
+/**
+ * Cancel one outstanding request in a pipe. Canceling a request
+ * can fail if the transaction has already completed before cancel
+ * is called. Even after a successful cancel call, it may take
+ * a frame or two for the cvmx_usb_poll() function to call the
+ * associated callback.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Pipe handle to cancel requests in.
+ * @param submit_handle
+ * Handle to transaction to cancel, returned by the submit function.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_cancel(cvmx_usb_state_t *state,
+ int pipe_handle, int submit_handle);
+
+
+/**
+ * Cancel all outstanding requests in a pipe. Logically all this
+ * does is call cvmx_usb_cancel() in a loop.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Pipe handle to cancel requests in.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_cancel_all(cvmx_usb_state_t *state,
+ int pipe_handle);
+
+/**
+ * Close a pipe created with cvmx_usb_open_pipe().
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param pipe_handle
+ * Pipe handle to close.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t. CVMX_USB_BUSY is returned if the
+ * pipe has outstanding transfers.
+ */
+extern cvmx_usb_status_t cvmx_usb_close_pipe(cvmx_usb_state_t *state,
+ int pipe_handle);
+
+/**
+ * Register a function to be called when various USB events occur.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ * @param reason Which event to register for.
+ * @param callback Function to call when the event occurs.
+ * @param user_data User data parameter to the function.
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_register_callback(cvmx_usb_state_t *state,
+ cvmx_usb_callback_t reason,
+ cvmx_usb_callback_func_t callback,
+ void *user_data);
+
+/**
+ * Get the current USB protocol level frame number. The frame
+ * number is always in the range of 0-0x7ff.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return USB frame number
+ */
+extern int cvmx_usb_get_frame_number(cvmx_usb_state_t *state);
+
+/**
+ * Poll the USB block for status and call all needed callback
+ * handlers. This function is meant to be called in the interrupt
+ * handler for the USB controller. It can also be called
+ * periodically in a loop for non-interrupt based operation.
+ *
+ * @param state USB device state populated by
+ * cvmx_usb_initialize().
+ *
+ * @return CVMX_USB_SUCCESS or a negative error code defined in
+ * cvmx_usb_status_t.
+ */
+extern cvmx_usb_status_t cvmx_usb_poll(cvmx_usb_state_t *state);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CVMX_USB_H__ */
--- /dev/null
+/***********************license start***************
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+
+ * * Neither the name of Cavium Networks nor the names of
+ * its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written
+ * permission.
+
+ * This Software, including technical data, may be subject to U.S. export
+ * control laws, including the U.S. Export Administration Act and its associated
+ * regulations, and may be subject to export or import regulations in other
+ * countries.
+
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+ * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
+ * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
+ * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION
+ * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+ ***********************license end**************************************/
+
+
+/**
+ * cvmx-usbcx-defs.h
+ *
+ * Configuration and status register (CSR) type definitions for
+ * Octeon usbcx.
+ *
+ */
+#ifndef __CVMX_USBCX_TYPEDEFS_H__
+#define __CVMX_USBCX_TYPEDEFS_H__
+
+#define CVMX_USBCXBASE 0x00016F0010000000ull
+#define CVMX_USBCXREG1(reg, bid) \
+ (CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \
+ ((bid) & 1) * 0x100000000000ull)
+#define CVMX_USBCXREG2(reg, bid, off) \
+ (CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \
+ (((off) & 7) + ((bid) & 1) * 0x8000000000ull) * 32)
+
+#define CVMX_USBCX_GAHBCFG(bid) CVMX_USBCXREG1(0x008, bid)
+#define CVMX_USBCX_GHWCFG3(bid) CVMX_USBCXREG1(0x04c, bid)
+#define CVMX_USBCX_GINTMSK(bid) CVMX_USBCXREG1(0x018, bid)
+#define CVMX_USBCX_GINTSTS(bid) CVMX_USBCXREG1(0x014, bid)
+#define CVMX_USBCX_GNPTXFSIZ(bid) CVMX_USBCXREG1(0x028, bid)
+#define CVMX_USBCX_GNPTXSTS(bid) CVMX_USBCXREG1(0x02c, bid)
+#define CVMX_USBCX_GOTGCTL(bid) CVMX_USBCXREG1(0x000, bid)
+#define CVMX_USBCX_GRSTCTL(bid) CVMX_USBCXREG1(0x010, bid)
+#define CVMX_USBCX_GRXFSIZ(bid) CVMX_USBCXREG1(0x024, bid)
+#define CVMX_USBCX_GRXSTSPH(bid) CVMX_USBCXREG1(0x020, bid)
+#define CVMX_USBCX_GUSBCFG(bid) CVMX_USBCXREG1(0x00c, bid)
+#define CVMX_USBCX_HAINT(bid) CVMX_USBCXREG1(0x414, bid)
+#define CVMX_USBCX_HAINTMSK(bid) CVMX_USBCXREG1(0x418, bid)
+#define CVMX_USBCX_HCCHARX(off, bid) CVMX_USBCXREG2(0x500, bid, off)
+#define CVMX_USBCX_HCFG(bid) CVMX_USBCXREG1(0x400, bid)
+#define CVMX_USBCX_HCINTMSKX(off, bid) CVMX_USBCXREG2(0x50c, bid, off)
+#define CVMX_USBCX_HCINTX(off, bid) CVMX_USBCXREG2(0x508, bid, off)
+#define CVMX_USBCX_HCSPLTX(off, bid) CVMX_USBCXREG2(0x504, bid, off)
+#define CVMX_USBCX_HCTSIZX(off, bid) CVMX_USBCXREG2(0x510, bid, off)
+#define CVMX_USBCX_HFIR(bid) CVMX_USBCXREG1(0x404, bid)
+#define CVMX_USBCX_HFNUM(bid) CVMX_USBCXREG1(0x408, bid)
+#define CVMX_USBCX_HPRT(bid) CVMX_USBCXREG1(0x440, bid)
+#define CVMX_USBCX_HPTXFSIZ(bid) CVMX_USBCXREG1(0x100, bid)
+#define CVMX_USBCX_HPTXSTS(bid) CVMX_USBCXREG1(0x410, bid)
+
+/**
+ * cvmx_usbc#_gahbcfg
+ *
+ * Core AHB Configuration Register (GAHBCFG)
+ *
+ * This register can be used to configure the core after power-on or a change in
+ * mode of operation. This register mainly contains AHB system-related
+ * configuration parameters. The AHB is the processor interface to the O2P USB
+ * core. In general, software need not know about this interface except to
+ * program the values as specified.
+ *
+ * The application must program this register as part of the O2P USB core
+ * initialization. Do not change this register after the initial programming.
+ */
+union cvmx_usbcx_gahbcfg {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_gahbcfg_s
+ * @ptxfemplvl: Periodic TxFIFO Empty Level (PTxFEmpLvl)
+ * Software should set this bit to 0x1.
+ * Indicates when the Periodic TxFIFO Empty Interrupt bit in the
+ * Core Interrupt register (GINTSTS.PTxFEmp) is triggered. This
+ * bit is used only in Slave mode.
+ * * 1'b0: GINTSTS.PTxFEmp interrupt indicates that the Periodic
+ * TxFIFO is half empty
+ * * 1'b1: GINTSTS.PTxFEmp interrupt indicates that the Periodic
+ * TxFIFO is completely empty
+ * @nptxfemplvl: Non-Periodic TxFIFO Empty Level (NPTxFEmpLvl)
+ * Software should set this bit to 0x1.
+ * Indicates when the Non-Periodic TxFIFO Empty Interrupt bit in
+ * the Core Interrupt register (GINTSTS.NPTxFEmp) is triggered.
+ * This bit is used only in Slave mode.
+ * * 1'b0: GINTSTS.NPTxFEmp interrupt indicates that the Non-
+ * Periodic TxFIFO is half empty
+ * * 1'b1: GINTSTS.NPTxFEmp interrupt indicates that the Non-
+ * Periodic TxFIFO is completely empty
+ * @dmaen: DMA Enable (DMAEn)
+ * * 1'b0: Core operates in Slave mode
+ * * 1'b1: Core operates in a DMA mode
+ * @hbstlen: Burst Length/Type (HBstLen)
+ * This field has not effect and should be left as 0x0.
+ * @glblintrmsk: Global Interrupt Mask (GlblIntrMsk)
+ * Software should set this field to 0x1.
+ * The application uses this bit to mask or unmask the interrupt
+ * line assertion to itself. Irrespective of this bit's setting,
+ * the interrupt status registers are updated by the core.
+ * * 1'b0: Mask the interrupt assertion to the application.
+ * * 1'b1: Unmask the interrupt assertion to the application.
+ */
+ struct cvmx_usbcx_gahbcfg_s {
+ uint32_t reserved_9_31 : 23;
+ uint32_t ptxfemplvl : 1;
+ uint32_t nptxfemplvl : 1;
+ uint32_t reserved_6_6 : 1;
+ uint32_t dmaen : 1;
+ uint32_t hbstlen : 4;
+ uint32_t glblintrmsk : 1;
+ } s;
+};
+typedef union cvmx_usbcx_gahbcfg cvmx_usbcx_gahbcfg_t;
+
+/**
+ * cvmx_usbc#_ghwcfg3
+ *
+ * User HW Config3 Register (GHWCFG3)
+ *
+ * This register contains the configuration options of the O2P USB core.
+ */
+union cvmx_usbcx_ghwcfg3 {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_ghwcfg3_s
+ * @dfifodepth: DFIFO Depth (DfifoDepth)
+ * This value is in terms of 32-bit words.
+ * * Minimum value is 32
+ * * Maximum value is 32768
+ * @ahbphysync: AHB and PHY Synchronous (AhbPhySync)
+ * Indicates whether AHB and PHY clocks are synchronous to
+ * each other.
+ * * 1'b0: No
+ * * 1'b1: Yes
+ * This bit is tied to 1.
+ * @rsttype: Reset Style for Clocked always Blocks in RTL (RstType)
+ * * 1'b0: Asynchronous reset is used in the core
+ * * 1'b1: Synchronous reset is used in the core
+ * @optfeature: Optional Features Removed (OptFeature)
+ * Indicates whether the User ID register, GPIO interface ports,
+ * and SOF toggle and counter ports were removed for gate count
+ * optimization.
+ * @vendor_control_interface_support: Vendor Control Interface Support
+ * * 1'b0: Vendor Control Interface is not available on the core.
+ * * 1'b1: Vendor Control Interface is available.
+ * @i2c_selection: I2C Selection
+ * * 1'b0: I2C Interface is not available on the core.
+ * * 1'b1: I2C Interface is available on the core.
+ * @otgen: OTG Function Enabled (OtgEn)
+ * The application uses this bit to indicate the O2P USB core's
+ * OTG capabilities.
+ * * 1'b0: Not OTG capable
+ * * 1'b1: OTG Capable
+ * @pktsizewidth: Width of Packet Size Counters (PktSizeWidth)
+ * * 3'b000: 4 bits
+ * * 3'b001: 5 bits
+ * * 3'b010: 6 bits
+ * * 3'b011: 7 bits
+ * * 3'b100: 8 bits
+ * * 3'b101: 9 bits
+ * * 3'b110: 10 bits
+ * * Others: Reserved
+ * @xfersizewidth: Width of Transfer Size Counters (XferSizeWidth)
+ * * 4'b0000: 11 bits
+ * * 4'b0001: 12 bits
+ * - ...
+ * * 4'b1000: 19 bits
+ * * Others: Reserved
+ */
+ struct cvmx_usbcx_ghwcfg3_s {
+ uint32_t dfifodepth : 16;
+ uint32_t reserved_13_15 : 3;
+ uint32_t ahbphysync : 1;
+ uint32_t rsttype : 1;
+ uint32_t optfeature : 1;
+ uint32_t vendor_control_interface_support : 1;
+ uint32_t i2c_selection : 1;
+ uint32_t otgen : 1;
+ uint32_t pktsizewidth : 3;
+ uint32_t xfersizewidth : 4;
+ } s;
+};
+typedef union cvmx_usbcx_ghwcfg3 cvmx_usbcx_ghwcfg3_t;
+
+/**
+ * cvmx_usbc#_gintmsk
+ *
+ * Core Interrupt Mask Register (GINTMSK)
+ *
+ * This register works with the Core Interrupt register to interrupt the
+ * application. When an interrupt bit is masked, the interrupt associated with
+ * that bit will not be generated. However, the Core Interrupt (GINTSTS)
+ * register bit corresponding to that interrupt will still be set.
+ * Mask interrupt: 1'b0, Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_gintmsk {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_gintmsk_s
+ * @wkupintmsk: Resume/Remote Wakeup Detected Interrupt Mask
+ * (WkUpIntMsk)
+ * @sessreqintmsk: Session Request/New Session Detected Interrupt Mask
+ * (SessReqIntMsk)
+ * @disconnintmsk: Disconnect Detected Interrupt Mask (DisconnIntMsk)
+ * @conidstschngmsk: Connector ID Status Change Mask (ConIDStsChngMsk)
+ * @ptxfempmsk: Periodic TxFIFO Empty Mask (PTxFEmpMsk)
+ * @hchintmsk: Host Channels Interrupt Mask (HChIntMsk)
+ * @prtintmsk: Host Port Interrupt Mask (PrtIntMsk)
+ * @fetsuspmsk: Data Fetch Suspended Mask (FetSuspMsk)
+ * @incomplpmsk: Incomplete Periodic Transfer Mask (incomplPMsk)
+ * Incomplete Isochronous OUT Transfer Mask
+ * (incompISOOUTMsk)
+ * @incompisoinmsk: Incomplete Isochronous IN Transfer Mask
+ * (incompISOINMsk)
+ * @oepintmsk: OUT Endpoints Interrupt Mask (OEPIntMsk)
+ * @inepintmsk: IN Endpoints Interrupt Mask (INEPIntMsk)
+ * @epmismsk: Endpoint Mismatch Interrupt Mask (EPMisMsk)
+ * @eopfmsk: End of Periodic Frame Interrupt Mask (EOPFMsk)
+ * @isooutdropmsk: Isochronous OUT Packet Dropped Interrupt Mask
+ * (ISOOutDropMsk)
+ * @enumdonemsk: Enumeration Done Mask (EnumDoneMsk)
+ * @usbrstmsk: USB Reset Mask (USBRstMsk)
+ * @usbsuspmsk: USB Suspend Mask (USBSuspMsk)
+ * @erlysuspmsk: Early Suspend Mask (ErlySuspMsk)
+ * @i2cint: I2C Interrupt Mask (I2CINT)
+ * @ulpickintmsk: ULPI Carkit Interrupt Mask (ULPICKINTMsk)
+ * I2C Carkit Interrupt Mask (I2CCKINTMsk)
+ * @goutnakeffmsk: Global OUT NAK Effective Mask (GOUTNakEffMsk)
+ * @ginnakeffmsk: Global Non-Periodic IN NAK Effective Mask
+ * (GINNakEffMsk)
+ * @nptxfempmsk: Non-Periodic TxFIFO Empty Mask (NPTxFEmpMsk)
+ * @rxflvlmsk: Receive FIFO Non-Empty Mask (RxFLvlMsk)
+ * @sofmsk: Start of (micro)Frame Mask (SofMsk)
+ * @otgintmsk: OTG Interrupt Mask (OTGIntMsk)
+ * @modemismsk: Mode Mismatch Interrupt Mask (ModeMisMsk)
+ */
+ struct cvmx_usbcx_gintmsk_s {
+ uint32_t wkupintmsk : 1;
+ uint32_t sessreqintmsk : 1;
+ uint32_t disconnintmsk : 1;
+ uint32_t conidstschngmsk : 1;
+ uint32_t reserved_27_27 : 1;
+ uint32_t ptxfempmsk : 1;
+ uint32_t hchintmsk : 1;
+ uint32_t prtintmsk : 1;
+ uint32_t reserved_23_23 : 1;
+ uint32_t fetsuspmsk : 1;
+ uint32_t incomplpmsk : 1;
+ uint32_t incompisoinmsk : 1;
+ uint32_t oepintmsk : 1;
+ uint32_t inepintmsk : 1;
+ uint32_t epmismsk : 1;
+ uint32_t reserved_16_16 : 1;
+ uint32_t eopfmsk : 1;
+ uint32_t isooutdropmsk : 1;
+ uint32_t enumdonemsk : 1;
+ uint32_t usbrstmsk : 1;
+ uint32_t usbsuspmsk : 1;
+ uint32_t erlysuspmsk : 1;
+ uint32_t i2cint : 1;
+ uint32_t ulpickintmsk : 1;
+ uint32_t goutnakeffmsk : 1;
+ uint32_t ginnakeffmsk : 1;
+ uint32_t nptxfempmsk : 1;
+ uint32_t rxflvlmsk : 1;
+ uint32_t sofmsk : 1;
+ uint32_t otgintmsk : 1;
+ uint32_t modemismsk : 1;
+ uint32_t reserved_0_0 : 1;
+ } s;
+};
+typedef union cvmx_usbcx_gintmsk cvmx_usbcx_gintmsk_t;
+
+/**
+ * cvmx_usbc#_gintsts
+ *
+ * Core Interrupt Register (GINTSTS)
+ *
+ * This register interrupts the application for system-level events in the
+ * current mode of operation (Device mode or Host mode). It is shown in
+ * Interrupt. Some of the bits in this register are valid only in Host mode,
+ * while others are valid in Device mode only. This register also indicates the
+ * current mode of operation. In order to clear the interrupt status bits of
+ * type R_SS_WC, the application must write 1'b1 into the bit. The FIFO status
+ * interrupts are read only; once software reads from or writes to the FIFO
+ * while servicing these interrupts, FIFO interrupt conditions are cleared
+ * automatically.
+ */
+union cvmx_usbcx_gintsts {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_gintsts_s
+ * @wkupint: Resume/Remote Wakeup Detected Interrupt (WkUpInt)
+ * In Device mode, this interrupt is asserted when a resume is
+ * detected on the USB. In Host mode, this interrupt is asserted
+ * when a remote wakeup is detected on the USB.
+ * For more information on how to use this interrupt, see "Partial
+ * Power-Down and Clock Gating Programming Model" on
+ * page 353.
+ * @sessreqint: Session Request/New Session Detected Interrupt
+ * (SessReqInt)
+ * In Host mode, this interrupt is asserted when a session request
+ * is detected from the device. In Device mode, this interrupt is
+ * asserted when the utmiotg_bvalid signal goes high.
+ * For more information on how to use this interrupt, see "Partial
+ * Power-Down and Clock Gating Programming Model" on
+ * page 353.
+ * @disconnint: Disconnect Detected Interrupt (DisconnInt)
+ * Asserted when a device disconnect is detected.
+ * @conidstschng: Connector ID Status Change (ConIDStsChng)
+ * The core sets this bit when there is a change in connector ID
+ * status.
+ * @ptxfemp: Periodic TxFIFO Empty (PTxFEmp)
+ * Asserted when the Periodic Transmit FIFO is either half or
+ * completely empty and there is space for at least one entry to be
+ * written in the Periodic Request Queue. The half or completely
+ * empty status is determined by the Periodic TxFIFO Empty Level
+ * bit in the Core AHB Configuration register
+ * (GAHBCFG.PTxFEmpLvl).
+ * @hchint: Host Channels Interrupt (HChInt)
+ * The core sets this bit to indicate that an interrupt is pending
+ * on one of the channels of the core (in Host mode). The
+ * application must read the Host All Channels Interrupt (HAINT)
+ * register to determine the exact number of the channel on which
+ * the interrupt occurred, and then read the corresponding Host
+ * Channel-n Interrupt (HCINTn) register to determine the exact
+ * cause of the interrupt. The application must clear the
+ * appropriate status bit in the HCINTn register to clear this bit.
+ * @prtint: Host Port Interrupt (PrtInt)
+ * The core sets this bit to indicate a change in port status of
+ * one of the O2P USB core ports in Host mode. The application must
+ * read the Host Port Control and Status (HPRT) register to
+ * determine the exact event that caused this interrupt. The
+ * application must clear the appropriate status bit in the Host
+ * Port Control and Status register to clear this bit.
+ * @fetsusp: Data Fetch Suspended (FetSusp)
+ * This interrupt is valid only in DMA mode. This interrupt
+ * indicates that the core has stopped fetching data for IN
+ * endpoints due to the unavailability of TxFIFO space or Request
+ * Queue space. This interrupt is used by the application for an
+ * endpoint mismatch algorithm.
+ * @incomplp: Incomplete Periodic Transfer (incomplP)
+ * In Host mode, the core sets this interrupt bit when there are
+ * incomplete periodic transactions still pending which are
+ * scheduled for the current microframe.
+ * Incomplete Isochronous OUT Transfer (incompISOOUT)
+ * The Device mode, the core sets this interrupt to indicate that
+ * there is at least one isochronous OUT endpoint on which the
+ * transfer is not completed in the current microframe. This
+ * interrupt is asserted along with the End of Periodic Frame
+ * Interrupt (EOPF) bit in this register.
+ * @incompisoin: Incomplete Isochronous IN Transfer (incompISOIN)
+ * The core sets this interrupt to indicate that there is at least
+ * one isochronous IN endpoint on which the transfer is not
+ * completed in the current microframe. This interrupt is asserted
+ * along with the End of Periodic Frame Interrupt (EOPF) bit in
+ * this register.
+ * @oepint: OUT Endpoints Interrupt (OEPInt)
+ * The core sets this bit to indicate that an interrupt is pending
+ * on one of the OUT endpoints of the core (in Device mode). The
+ * application must read the Device All Endpoints Interrupt
+ * (DAINT) register to determine the exact number of the OUT
+ * endpoint on which the interrupt occurred, and then read the
+ * corresponding Device OUT Endpoint-n Interrupt (DOEPINTn)
+ * register to determine the exact cause of the interrupt. The
+ * application must clear the appropriate status bit in the
+ * corresponding DOEPINTn register to clear this bit.
+ * @iepint: IN Endpoints Interrupt (IEPInt)
+ * The core sets this bit to indicate that an interrupt is pending
+ * on one of the IN endpoints of the core (in Device mode). The
+ * application must read the Device All Endpoints Interrupt
+ * (DAINT) register to determine the exact number of the IN
+ * endpoint on which the interrupt occurred, and then read the
+ * corresponding Device IN Endpoint-n Interrupt (DIEPINTn)
+ * register to determine the exact cause of the interrupt. The
+ * application must clear the appropriate status bit in the
+ * corresponding DIEPINTn register to clear this bit.
+ * @epmis: Endpoint Mismatch Interrupt (EPMis)
+ * Indicates that an IN token has been received for a non-periodic
+ * endpoint, but the data for another endpoint is present in the
+ * top of the Non-Periodic Transmit FIFO and the IN endpoint
+ * mismatch count programmed by the application has expired.
+ * @eopf: End of Periodic Frame Interrupt (EOPF)
+ * Indicates that the period specified in the Periodic Frame
+ * Interval field of the Device Configuration register
+ * (DCFG.PerFrInt) has been reached in the current microframe.
+ * @isooutdrop: Isochronous OUT Packet Dropped Interrupt (ISOOutDrop)
+ * The core sets this bit when it fails to write an isochronous OUT
+ * packet into the RxFIFO because the RxFIFO doesn't have
+ * enough space to accommodate a maximum packet size packet
+ * for the isochronous OUT endpoint.
+ * @enumdone: Enumeration Done (EnumDone)
+ * The core sets this bit to indicate that speed enumeration is
+ * complete. The application must read the Device Status (DSTS)
+ * register to obtain the enumerated speed.
+ * @usbrst: USB Reset (USBRst)
+ * The core sets this bit to indicate that a reset is detected on
+ * the USB.
+ * @usbsusp: USB Suspend (USBSusp)
+ * The core sets this bit to indicate that a suspend was detected
+ * on the USB. The core enters the Suspended state when there
+ * is no activity on the phy_line_state_i signal for an extended
+ * period of time.
+ * @erlysusp: Early Suspend (ErlySusp)
+ * The core sets this bit to indicate that an Idle state has been
+ * detected on the USB for 3 ms.
+ * @i2cint: I2C Interrupt (I2CINT)
+ * This bit is always 0x0.
+ * @ulpickint: ULPI Carkit Interrupt (ULPICKINT)
+ * This bit is always 0x0.
+ * @goutnakeff: Global OUT NAK Effective (GOUTNakEff)
+ * Indicates that the Set Global OUT NAK bit in the Device Control
+ * register (DCTL.SGOUTNak), set by the application, has taken
+ * effect in the core. This bit can be cleared by writing the Clear
+ * Global OUT NAK bit in the Device Control register
+ * (DCTL.CGOUTNak).
+ * @ginnakeff: Global IN Non-Periodic NAK Effective (GINNakEff)
+ * Indicates that the Set Global Non-Periodic IN NAK bit in the
+ * Device Control register (DCTL.SGNPInNak), set by the
+ * application, has taken effect in the core. That is, the core has
+ * sampled the Global IN NAK bit set by the application. This bit
+ * can be cleared by clearing the Clear Global Non-Periodic IN
+ * NAK bit in the Device Control register (DCTL.CGNPInNak).
+ * This interrupt does not necessarily mean that a NAK handshake
+ * is sent out on the USB. The STALL bit takes precedence over
+ * the NAK bit.
+ * @nptxfemp: Non-Periodic TxFIFO Empty (NPTxFEmp)
+ * This interrupt is asserted when the Non-Periodic TxFIFO is
+ * either half or completely empty, and there is space for at least
+ * one entry to be written to the Non-Periodic Transmit Request
+ * Queue. The half or completely empty status is determined by
+ * the Non-Periodic TxFIFO Empty Level bit in the Core AHB
+ * Configuration register (GAHBCFG.NPTxFEmpLvl).
+ * @rxflvl: RxFIFO Non-Empty (RxFLvl)
+ * Indicates that there is at least one packet pending to be read
+ * from the RxFIFO.
+ * @sof: Start of (micro)Frame (Sof)
+ * In Host mode, the core sets this bit to indicate that an SOF
+ * (FS), micro-SOF (HS), or Keep-Alive (LS) is transmitted on the
+ * USB. The application must write a 1 to this bit to clear the
+ * interrupt.
+ * In Device mode, in the core sets this bit to indicate that an
+ * SOF token has been received on the USB. The application can read
+ * the Device Status register to get the current (micro)frame
+ * number. This interrupt is seen only when the core is operating
+ * at either HS or FS.
+ * @otgint: OTG Interrupt (OTGInt)
+ * The core sets this bit to indicate an OTG protocol event. The
+ * application must read the OTG Interrupt Status (GOTGINT)
+ * register to determine the exact event that caused this
+ * interrupt. The application must clear the appropriate status bit
+ * in the GOTGINT register to clear this bit.
+ * @modemis: Mode Mismatch Interrupt (ModeMis)
+ * The core sets this bit when the application is trying to access:
+ * * A Host mode register, when the core is operating in Device
+ * mode
+ * * A Device mode register, when the core is operating in Host
+ * mode
+ * The register access is completed on the AHB with an OKAY
+ * response, but is ignored by the core internally and doesn't
+ * affect the operation of the core.
+ * @curmod: Current Mode of Operation (CurMod)
+ * Indicates the current mode of operation.
+ * * 1'b0: Device mode
+ * * 1'b1: Host mode
+ */
+ struct cvmx_usbcx_gintsts_s {
+ uint32_t wkupint : 1;
+ uint32_t sessreqint : 1;
+ uint32_t disconnint : 1;
+ uint32_t conidstschng : 1;
+ uint32_t reserved_27_27 : 1;
+ uint32_t ptxfemp : 1;
+ uint32_t hchint : 1;
+ uint32_t prtint : 1;
+ uint32_t reserved_23_23 : 1;
+ uint32_t fetsusp : 1;
+ uint32_t incomplp : 1;
+ uint32_t incompisoin : 1;
+ uint32_t oepint : 1;
+ uint32_t iepint : 1;
+ uint32_t epmis : 1;
+ uint32_t reserved_16_16 : 1;
+ uint32_t eopf : 1;
+ uint32_t isooutdrop : 1;
+ uint32_t enumdone : 1;
+ uint32_t usbrst : 1;
+ uint32_t usbsusp : 1;
+ uint32_t erlysusp : 1;
+ uint32_t i2cint : 1;
+ uint32_t ulpickint : 1;
+ uint32_t goutnakeff : 1;
+ uint32_t ginnakeff : 1;
+ uint32_t nptxfemp : 1;
+ uint32_t rxflvl : 1;
+ uint32_t sof : 1;
+ uint32_t otgint : 1;
+ uint32_t modemis : 1;
+ uint32_t curmod : 1;
+ } s;
+};
+typedef union cvmx_usbcx_gintsts cvmx_usbcx_gintsts_t;
+
+/**
+ * cvmx_usbc#_gnptxfsiz
+ *
+ * Non-Periodic Transmit FIFO Size Register (GNPTXFSIZ)
+ *
+ * The application can program the RAM size and the memory start address for the
+ * Non-Periodic TxFIFO.
+ */
+union cvmx_usbcx_gnptxfsiz {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_gnptxfsiz_s
+ * @nptxfdep: Non-Periodic TxFIFO Depth (NPTxFDep)
+ * This value is in terms of 32-bit words.
+ * Minimum value is 16
+ * Maximum value is 32768
+ * @nptxfstaddr: Non-Periodic Transmit RAM Start Address (NPTxFStAddr)
+ * This field contains the memory start address for Non-Periodic
+ * Transmit FIFO RAM.
+ */
+ struct cvmx_usbcx_gnptxfsiz_s {
+ uint32_t nptxfdep : 16;
+ uint32_t nptxfstaddr : 16;
+ } s;
+};
+typedef union cvmx_usbcx_gnptxfsiz cvmx_usbcx_gnptxfsiz_t;
+
+/**
+ * cvmx_usbc#_gnptxsts
+ *
+ * Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS)
+ *
+ * This read-only register contains the free space information for the
+ * Non-Periodic TxFIFO and the Non-Periodic Transmit Request Queue.
+ */
+union cvmx_usbcx_gnptxsts {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_gnptxsts_s
+ * @nptxqtop: Top of the Non-Periodic Transmit Request Queue (NPTxQTop)
+ * Entry in the Non-Periodic Tx Request Queue that is currently
+ * being processed by the MAC.
+ * * Bits [30:27]: Channel/endpoint number
+ * * Bits [26:25]:
+ * - 2'b00: IN/OUT token
+ * - 2'b01: Zero-length transmit packet (device IN/host OUT)
+ * - 2'b10: PING/CSPLIT token
+ * - 2'b11: Channel halt command
+ * * Bit [24]: Terminate (last entry for selected channel/endpoint)
+ * @nptxqspcavail: Non-Periodic Transmit Request Queue Space Available
+ * (NPTxQSpcAvail)
+ * Indicates the amount of free space available in the Non-
+ * Periodic Transmit Request Queue. This queue holds both IN
+ * and OUT requests in Host mode. Device mode has only IN
+ * requests.
+ * * 8'h0: Non-Periodic Transmit Request Queue is full
+ * * 8'h1: 1 location available
+ * * 8'h2: 2 locations available
+ * * n: n locations available (0..8)
+ * * Others: Reserved
+ * @nptxfspcavail: Non-Periodic TxFIFO Space Avail (NPTxFSpcAvail)
+ * Indicates the amount of free space available in the Non-
+ * Periodic TxFIFO.
+ * Values are in terms of 32-bit words.
+ * * 16'h0: Non-Periodic TxFIFO is full
+ * * 16'h1: 1 word available
+ * * 16'h2: 2 words available
+ * * 16'hn: n words available (where 0..32768)
+ * * 16'h8000: 32768 words available
+ * * Others: Reserved
+ */
+ struct cvmx_usbcx_gnptxsts_s {
+ uint32_t reserved_31_31 : 1;
+ uint32_t nptxqtop : 7;
+ uint32_t nptxqspcavail : 8;
+ uint32_t nptxfspcavail : 16;
+ } s;
+};
+typedef union cvmx_usbcx_gnptxsts cvmx_usbcx_gnptxsts_t;
+
+/**
+ * cvmx_usbc#_grstctl
+ *
+ * Core Reset Register (GRSTCTL)
+ *
+ * The application uses this register to reset various hardware features inside
+ * the core.
+ */
+union cvmx_usbcx_grstctl {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_grstctl_s
+ * @ahbidle: AHB Master Idle (AHBIdle)
+ * Indicates that the AHB Master State Machine is in the IDLE
+ * condition.
+ * @dmareq: DMA Request Signal (DMAReq)
+ * Indicates that the DMA request is in progress. Used for debug.
+ * @txfnum: TxFIFO Number (TxFNum)
+ * This is the FIFO number that must be flushed using the TxFIFO
+ * Flush bit. This field must not be changed until the core clears
+ * the TxFIFO Flush bit.
+ * * 5'h0: Non-Periodic TxFIFO flush
+ * * 5'h1: Periodic TxFIFO 1 flush in Device mode or Periodic
+ * TxFIFO flush in Host mode
+ * * 5'h2: Periodic TxFIFO 2 flush in Device mode
+ * - ...
+ * * 5'hF: Periodic TxFIFO 15 flush in Device mode
+ * * 5'h10: Flush all the Periodic and Non-Periodic TxFIFOs in the
+ * core
+ * @txfflsh: TxFIFO Flush (TxFFlsh)
+ * This bit selectively flushes a single or all transmit FIFOs, but
+ * cannot do so if the core is in the midst of a transaction.
+ * The application must only write this bit after checking that the
+ * core is neither writing to the TxFIFO nor reading from the
+ * TxFIFO.
+ * The application must wait until the core clears this bit before
+ * performing any operations. This bit takes 8 clocks (of phy_clk
+ * or hclk, whichever is slower) to clear.
+ * @rxfflsh: RxFIFO Flush (RxFFlsh)
+ * The application can flush the entire RxFIFO using this bit, but
+ * must first ensure that the core is not in the middle of a
+ * transaction.
+ * The application must only write to this bit after checking that
+ * the core is neither reading from the RxFIFO nor writing to the
+ * RxFIFO.
+ * The application must wait until the bit is cleared before
+ * performing any other operations. This bit will take 8 clocks
+ * (slowest of PHY or AHB clock) to clear.
+ * @intknqflsh: IN Token Sequence Learning Queue Flush (INTknQFlsh)
+ * The application writes this bit to flush the IN Token Sequence
+ * Learning Queue.
+ * @frmcntrrst: Host Frame Counter Reset (FrmCntrRst)
+ * The application writes this bit to reset the (micro)frame number
+ * counter inside the core. When the (micro)frame counter is reset,
+ * the subsequent SOF sent out by the core will have a
+ * (micro)frame number of 0.
+ * @hsftrst: HClk Soft Reset (HSftRst)
+ * The application uses this bit to flush the control logic in the
+ * AHB Clock domain. Only AHB Clock Domain pipelines are reset.
+ * * FIFOs are not flushed with this bit.
+ * * All state machines in the AHB clock domain are reset to the
+ * Idle state after terminating the transactions on the AHB,
+ * following the protocol.
+ * * CSR control bits used by the AHB clock domain state
+ * machines are cleared.
+ * * To clear this interrupt, status mask bits that control the
+ * interrupt status and are generated by the AHB clock domain
+ * state machine are cleared.
+ * * Because interrupt status bits are not cleared, the application
+ * can get the status of any core events that occurred after it set
+ * this bit.
+ * This is a self-clearing bit that the core clears after all
+ * necessary logic is reset in the core. This may take several
+ * clocks, depending on the core's current state.
+ * @csftrst: Core Soft Reset (CSftRst)
+ * Resets the hclk and phy_clock domains as follows:
+ * * Clears the interrupts and all the CSR registers except the
+ * following register bits:
+ * - PCGCCTL.RstPdwnModule
+ * - PCGCCTL.GateHclk
+ * - PCGCCTL.PwrClmp
+ * - PCGCCTL.StopPPhyLPwrClkSelclk
+ * - GUSBCFG.PhyLPwrClkSel
+ * - GUSBCFG.DDRSel
+ * - GUSBCFG.PHYSel
+ * - GUSBCFG.FSIntf
+ * - GUSBCFG.ULPI_UTMI_Sel
+ * - GUSBCFG.PHYIf
+ * - HCFG.FSLSPclkSel
+ * - DCFG.DevSpd
+ * * All module state machines (except the AHB Slave Unit) are
+ * reset to the IDLE state, and all the transmit FIFOs and the
+ * receive FIFO are flushed.
+ * * Any transactions on the AHB Master are terminated as soon
+ * as possible, after gracefully completing the last data phase of
+ * an AHB transfer. Any transactions on the USB are terminated
+ * immediately.
+ * The application can write to this bit any time it wants to reset
+ * the core. This is a self-clearing bit and the core clears this
+ * bit after all the necessary logic is reset in the core, which
+ * may take several clocks, depending on the current state of the
+ * core. Once this bit is cleared software should wait at least 3
+ * PHY clocks before doing any access to the PHY domain
+ * (synchronization delay). Software should also should check that
+ * bit 31 of this register is 1 (AHB Master is IDLE) before
+ * starting any operation.
+ * Typically software reset is used during software development
+ * and also when you dynamically change the PHY selection bits
+ * in the USB configuration registers listed above. When you
+ * change the PHY, the corresponding clock for the PHY is
+ * selected and used in the PHY domain. Once a new clock is
+ * selected, the PHY domain has to be reset for proper operation.
+ */
+ struct cvmx_usbcx_grstctl_s {
+ uint32_t ahbidle : 1;
+ uint32_t dmareq : 1;
+ uint32_t reserved_11_29 : 19;
+ uint32_t txfnum : 5;
+ uint32_t txfflsh : 1;
+ uint32_t rxfflsh : 1;
+ uint32_t intknqflsh : 1;
+ uint32_t frmcntrrst : 1;
+ uint32_t hsftrst : 1;
+ uint32_t csftrst : 1;
+ } s;
+};
+typedef union cvmx_usbcx_grstctl cvmx_usbcx_grstctl_t;
+
+/**
+ * cvmx_usbc#_grxfsiz
+ *
+ * Receive FIFO Size Register (GRXFSIZ)
+ *
+ * The application can program the RAM size that must be allocated to the
+ * RxFIFO.
+ */
+union cvmx_usbcx_grxfsiz {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_grxfsiz_s
+ * @rxfdep: RxFIFO Depth (RxFDep)
+ * This value is in terms of 32-bit words.
+ * * Minimum value is 16
+ * * Maximum value is 32768
+ */
+ struct cvmx_usbcx_grxfsiz_s {
+ uint32_t reserved_16_31 : 16;
+ uint32_t rxfdep : 16;
+ } s;
+};
+typedef union cvmx_usbcx_grxfsiz cvmx_usbcx_grxfsiz_t;
+
+/**
+ * cvmx_usbc#_grxstsph
+ *
+ * Receive Status Read and Pop Register, Host Mode (GRXSTSPH)
+ *
+ * A read to the Receive Status Read and Pop register returns and additionally
+ * pops the top data entry out of the RxFIFO.
+ * This Description is only valid when the core is in Host Mode. For Device Mode
+ * use USBC_GRXSTSPD instead.
+ * NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the
+ * same offset in the O2P USB core. The offset difference shown in this
+ * document is for software clarity and is actually ignored by the
+ * hardware.
+ */
+union cvmx_usbcx_grxstsph {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_grxstsph_s
+ * @pktsts: Packet Status (PktSts)
+ * Indicates the status of the received packet
+ * * 4'b0010: IN data packet received
+ * * 4'b0011: IN transfer completed (triggers an interrupt)
+ * * 4'b0101: Data toggle error (triggers an interrupt)
+ * * 4'b0111: Channel halted (triggers an interrupt)
+ * * Others: Reserved
+ * @dpid: Data PID (DPID)
+ * * 2'b00: DATA0
+ * * 2'b10: DATA1
+ * * 2'b01: DATA2
+ * * 2'b11: MDATA
+ * @bcnt: Byte Count (BCnt)
+ * Indicates the byte count of the received IN data packet
+ * @chnum: Channel Number (ChNum)
+ * Indicates the channel number to which the current received
+ * packet belongs.
+ */
+ struct cvmx_usbcx_grxstsph_s {
+ uint32_t reserved_21_31 : 11;
+ uint32_t pktsts : 4;
+ uint32_t dpid : 2;
+ uint32_t bcnt : 11;
+ uint32_t chnum : 4;
+ } s;
+};
+typedef union cvmx_usbcx_grxstsph cvmx_usbcx_grxstsph_t;
+
+/**
+ * cvmx_usbc#_gusbcfg
+ *
+ * Core USB Configuration Register (GUSBCFG)
+ *
+ * This register can be used to configure the core after power-on or a changing
+ * to Host mode or Device mode. It contains USB and USB-PHY related
+ * configuration parameters. The application must program this register before
+ * starting any transactions on either the AHB or the USB. Do not make changes
+ * to this register after the initial programming.
+ */
+union cvmx_usbcx_gusbcfg {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_gusbcfg_s
+ * @otgi2csel: UTMIFS or I2C Interface Select (OtgI2CSel)
+ * This bit is always 0x0.
+ * @phylpwrclksel: PHY Low-Power Clock Select (PhyLPwrClkSel)
+ * Software should set this bit to 0x0.
+ * Selects either 480-MHz or 48-MHz (low-power) PHY mode. In
+ * FS and LS modes, the PHY can usually operate on a 48-MHz
+ * clock to save power.
+ * * 1'b0: 480-MHz Internal PLL clock
+ * * 1'b1: 48-MHz External Clock
+ * In 480 MHz mode, the UTMI interface operates at either 60 or
+ * 30-MHz, depending upon whether 8- or 16-bit data width is
+ * selected. In 48-MHz mode, the UTMI interface operates at 48
+ * MHz in FS mode and at either 48 or 6 MHz in LS mode
+ * (depending on the PHY vendor).
+ * This bit drives the utmi_fsls_low_power core output signal, and
+ * is valid only for UTMI+ PHYs.
+ * @usbtrdtim: USB Turnaround Time (USBTrdTim)
+ * Sets the turnaround time in PHY clocks.
+ * Specifies the response time for a MAC request to the Packet
+ * FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM).
+ * This must be programmed to 0x5.
+ * @hnpcap: HNP-Capable (HNPCap)
+ * This bit is always 0x0.
+ * @srpcap: SRP-Capable (SRPCap)
+ * This bit is always 0x0.
+ * @ddrsel: ULPI DDR Select (DDRSel)
+ * Software should set this bit to 0x0.
+ * @physel: USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial
+ * Software should set this bit to 0x0.
+ * @fsintf: Full-Speed Serial Interface Select (FSIntf)
+ * Software should set this bit to 0x0.
+ * @ulpi_utmi_sel: ULPI or UTMI+ Select (ULPI_UTMI_Sel)
+ * This bit is always 0x0.
+ * @phyif: PHY Interface (PHYIf)
+ * This bit is always 0x1.
+ * @toutcal: HS/FS Timeout Calibration (TOutCal)
+ * The number of PHY clocks that the application programs in this
+ * field is added to the high-speed/full-speed interpacket timeout
+ * duration in the core to account for any additional delays
+ * introduced by the PHY. This may be required, since the delay
+ * introduced by the PHY in generating the linestate condition may
+ * vary from one PHY to another.
+ * The USB standard timeout value for high-speed operation is
+ * 736 to 816 (inclusive) bit times. The USB standard timeout
+ * value for full-speed operation is 16 to 18 (inclusive) bit
+ * times. The application must program this field based on the
+ * speed of enumeration. The number of bit times added per PHY
+ * clock are:
+ * High-speed operation:
+ * * One 30-MHz PHY clock = 16 bit times
+ * * One 60-MHz PHY clock = 8 bit times
+ * Full-speed operation:
+ * * One 30-MHz PHY clock = 0.4 bit times
+ * * One 60-MHz PHY clock = 0.2 bit times
+ * * One 48-MHz PHY clock = 0.25 bit times
+ */
+ struct cvmx_usbcx_gusbcfg_s {
+ uint32_t reserved_17_31 : 15;
+ uint32_t otgi2csel : 1;
+ uint32_t phylpwrclksel : 1;
+ uint32_t reserved_14_14 : 1;
+ uint32_t usbtrdtim : 4;
+ uint32_t hnpcap : 1;
+ uint32_t srpcap : 1;
+ uint32_t ddrsel : 1;
+ uint32_t physel : 1;
+ uint32_t fsintf : 1;
+ uint32_t ulpi_utmi_sel : 1;
+ uint32_t phyif : 1;
+ uint32_t toutcal : 3;
+ } s;
+};
+typedef union cvmx_usbcx_gusbcfg cvmx_usbcx_gusbcfg_t;
+
+/**
+ * cvmx_usbc#_haint
+ *
+ * Host All Channels Interrupt Register (HAINT)
+ *
+ * When a significant event occurs on a channel, the Host All Channels Interrupt
+ * register interrupts the application using the Host Channels Interrupt bit of
+ * the Core Interrupt register (GINTSTS.HChInt). This is shown in Interrupt.
+ * There is one interrupt bit per channel, up to a maximum of 16 bits. Bits in
+ * this register are set and cleared when the application sets and clears bits
+ * in the corresponding Host Channel-n Interrupt register.
+ */
+union cvmx_usbcx_haint {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_haint_s
+ * @haint: Channel Interrupts (HAINT)
+ * One bit per channel: Bit 0 for Channel 0, bit 15 for Channel 15
+ */
+ struct cvmx_usbcx_haint_s {
+ uint32_t reserved_16_31 : 16;
+ uint32_t haint : 16;
+ } s;
+};
+typedef union cvmx_usbcx_haint cvmx_usbcx_haint_t;
+
+/**
+ * cvmx_usbc#_haintmsk
+ *
+ * Host All Channels Interrupt Mask Register (HAINTMSK)
+ *
+ * The Host All Channel Interrupt Mask register works with the Host All Channel
+ * Interrupt register to interrupt the application when an event occurs on a
+ * channel. There is one interrupt mask bit per channel, up to a maximum of 16
+ * bits.
+ * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_haintmsk {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_haintmsk_s
+ * @haintmsk: Channel Interrupt Mask (HAINTMsk)
+ * One bit per channel: Bit 0 for channel 0, bit 15 for channel 15
+ */
+ struct cvmx_usbcx_haintmsk_s {
+ uint32_t reserved_16_31 : 16;
+ uint32_t haintmsk : 16;
+ } s;
+};
+typedef union cvmx_usbcx_haintmsk cvmx_usbcx_haintmsk_t;
+
+/**
+ * cvmx_usbc#_hcchar#
+ *
+ * Host Channel-n Characteristics Register (HCCHAR)
+ *
+ */
+union cvmx_usbcx_hccharx {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_hccharx_s
+ * @chena: Channel Enable (ChEna)
+ * This field is set by the application and cleared by the OTG
+ * host.
+ * * 1'b0: Channel disabled
+ * * 1'b1: Channel enabled
+ * @chdis: Channel Disable (ChDis)
+ * The application sets this bit to stop transmitting/receiving
+ * data on a channel, even before the transfer for that channel is
+ * complete. The application must wait for the Channel Disabled
+ * interrupt before treating the channel as disabled.
+ * @oddfrm: Odd Frame (OddFrm)
+ * This field is set (reset) by the application to indicate that
+ * the OTG host must perform a transfer in an odd (micro)frame.
+ * This field is applicable for only periodic (isochronous and
+ * interrupt) transactions.
+ * * 1'b0: Even (micro)frame
+ * * 1'b1: Odd (micro)frame
+ * @devaddr: Device Address (DevAddr)
+ * This field selects the specific device serving as the data
+ * source or sink.
+ * @ec: Multi Count (MC) / Error Count (EC)
+ * When the Split Enable bit of the Host Channel-n Split Control
+ * register (HCSPLTn.SpltEna) is reset (1'b0), this field indicates
+ * to the host the number of transactions that should be executed
+ * per microframe for this endpoint.
+ * * 2'b00: Reserved. This field yields undefined results.
+ * * 2'b01: 1 transaction
+ * * 2'b10: 2 transactions to be issued for this endpoint per
+ * microframe
+ * * 2'b11: 3 transactions to be issued for this endpoint per
+ * microframe
+ * When HCSPLTn.SpltEna is set (1'b1), this field indicates the
+ * number of immediate retries to be performed for a periodic split
+ * transactions on transaction errors. This field must be set to at
+ * least 2'b01.
+ * @eptype: Endpoint Type (EPType)
+ * Indicates the transfer type selected.
+ * * 2'b00: Control
+ * * 2'b01: Isochronous
+ * * 2'b10: Bulk
+ * * 2'b11: Interrupt
+ * @lspddev: Low-Speed Device (LSpdDev)
+ * This field is set by the application to indicate that this
+ * channel is communicating to a low-speed device.
+ * @epdir: Endpoint Direction (EPDir)
+ * Indicates whether the transaction is IN or OUT.
+ * * 1'b0: OUT
+ * * 1'b1: IN
+ * @epnum: Endpoint Number (EPNum)
+ * Indicates the endpoint number on the device serving as the
+ * data source or sink.
+ * @mps: Maximum Packet Size (MPS)
+ * Indicates the maximum packet size of the associated endpoint.
+ */
+ struct cvmx_usbcx_hccharx_s {
+ uint32_t chena : 1;
+ uint32_t chdis : 1;
+ uint32_t oddfrm : 1;
+ uint32_t devaddr : 7;
+ uint32_t ec : 2;
+ uint32_t eptype : 2;
+ uint32_t lspddev : 1;
+ uint32_t reserved_16_16 : 1;
+ uint32_t epdir : 1;
+ uint32_t epnum : 4;
+ uint32_t mps : 11;
+ } s;
+};
+typedef union cvmx_usbcx_hccharx cvmx_usbcx_hccharx_t;
+
+/**
+ * cvmx_usbc#_hcfg
+ *
+ * Host Configuration Register (HCFG)
+ *
+ * This register configures the core after power-on. Do not make changes to this
+ * register after initializing the host.
+ */
+union cvmx_usbcx_hcfg {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_hcfg_s
+ * @fslssupp: FS- and LS-Only Support (FSLSSupp)
+ * The application uses this bit to control the core's enumeration
+ * speed. Using this bit, the application can make the core
+ * enumerate as a FS host, even if the connected device supports
+ * HS traffic. Do not make changes to this field after initial
+ * programming.
+ * * 1'b0: HS/FS/LS, based on the maximum speed supported by
+ * the connected device
+ * * 1'b1: FS/LS-only, even if the connected device can support HS
+ * @fslspclksel: FS/LS PHY Clock Select (FSLSPclkSel)
+ * When the core is in FS Host mode
+ * * 2'b00: PHY clock is running at 30/60 MHz
+ * * 2'b01: PHY clock is running at 48 MHz
+ * * Others: Reserved
+ * When the core is in LS Host mode
+ * * 2'b00: PHY clock is running at 30/60 MHz. When the
+ * UTMI+/ULPI PHY Low Power mode is not selected, use
+ * 30/60 MHz.
+ * * 2'b01: PHY clock is running at 48 MHz. When the UTMI+
+ * PHY Low Power mode is selected, use 48MHz if the PHY
+ * supplies a 48 MHz clock during LS mode.
+ * * 2'b10: PHY clock is running at 6 MHz. In USB 1.1 FS mode,
+ * use 6 MHz when the UTMI+ PHY Low Power mode is
+ * selected and the PHY supplies a 6 MHz clock during LS
+ * mode. If you select a 6 MHz clock during LS mode, you must
+ * do a soft reset.
+ * * 2'b11: Reserved
+ */
+ struct cvmx_usbcx_hcfg_s {
+ uint32_t reserved_3_31 : 29;
+ uint32_t fslssupp : 1;
+ uint32_t fslspclksel : 2;
+ } s;
+};
+typedef union cvmx_usbcx_hcfg cvmx_usbcx_hcfg_t;
+
+/**
+ * cvmx_usbc#_hcint#
+ *
+ * Host Channel-n Interrupt Register (HCINT)
+ *
+ * This register indicates the status of a channel with respect to USB- and
+ * AHB-related events. The application must read this register when the Host
+ * Channels Interrupt bit of the Core Interrupt register (GINTSTS.HChInt) is
+ * set. Before the application can read this register, it must first read
+ * the Host All Channels Interrupt (HAINT) register to get the exact channel
+ * number for the Host Channel-n Interrupt register. The application must clear
+ * the appropriate bit in this register to clear the corresponding bits in the
+ * HAINT and GINTSTS registers.
+ */
+union cvmx_usbcx_hcintx {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_hcintx_s
+ * @datatglerr: Data Toggle Error (DataTglErr)
+ * @frmovrun: Frame Overrun (FrmOvrun)
+ * @bblerr: Babble Error (BblErr)
+ * @xacterr: Transaction Error (XactErr)
+ * @nyet: NYET Response Received Interrupt (NYET)
+ * @ack: ACK Response Received Interrupt (ACK)
+ * @nak: NAK Response Received Interrupt (NAK)
+ * @stall: STALL Response Received Interrupt (STALL)
+ * @ahberr: This bit is always 0x0.
+ * @chhltd: Channel Halted (ChHltd)
+ * Indicates the transfer completed abnormally either because of
+ * any USB transaction error or in response to disable request by
+ * the application.
+ * @xfercompl: Transfer Completed (XferCompl)
+ * Transfer completed normally without any errors.
+ */
+ struct cvmx_usbcx_hcintx_s {
+ uint32_t reserved_11_31 : 21;
+ uint32_t datatglerr : 1;
+ uint32_t frmovrun : 1;
+ uint32_t bblerr : 1;
+ uint32_t xacterr : 1;
+ uint32_t nyet : 1;
+ uint32_t ack : 1;
+ uint32_t nak : 1;
+ uint32_t stall : 1;
+ uint32_t ahberr : 1;
+ uint32_t chhltd : 1;
+ uint32_t xfercompl : 1;
+ } s;
+};
+typedef union cvmx_usbcx_hcintx cvmx_usbcx_hcintx_t;
+
+/**
+ * cvmx_usbc#_hcintmsk#
+ *
+ * Host Channel-n Interrupt Mask Register (HCINTMSKn)
+ *
+ * This register reflects the mask for each channel status described in the
+ * previous section.
+ * Mask interrupt: 1'b0 Unmask interrupt: 1'b1
+ */
+union cvmx_usbcx_hcintmskx {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_hcintmskx_s
+ * @datatglerrmsk: Data Toggle Error Mask (DataTglErrMsk)
+ * @frmovrunmsk: Frame Overrun Mask (FrmOvrunMsk)
+ * @bblerrmsk: Babble Error Mask (BblErrMsk)
+ * @xacterrmsk: Transaction Error Mask (XactErrMsk)
+ * @nyetmsk: NYET Response Received Interrupt Mask (NyetMsk)
+ * @ackmsk: ACK Response Received Interrupt Mask (AckMsk)
+ * @nakmsk: NAK Response Received Interrupt Mask (NakMsk)
+ * @stallmsk: STALL Response Received Interrupt Mask (StallMsk)
+ * @ahberrmsk: AHB Error Mask (AHBErrMsk)
+ * @chhltdmsk: Channel Halted Mask (ChHltdMsk)
+ * @xfercomplmsk: Transfer Completed Mask (XferComplMsk)
+ */
+ struct cvmx_usbcx_hcintmskx_s {
+ uint32_t reserved_11_31 : 21;
+ uint32_t datatglerrmsk : 1;
+ uint32_t frmovrunmsk : 1;
+ uint32_t bblerrmsk : 1;
+ uint32_t xacterrmsk : 1;
+ uint32_t nyetmsk : 1;
+ uint32_t ackmsk : 1;
+ uint32_t nakmsk : 1;
+ uint32_t stallmsk : 1;
+ uint32_t ahberrmsk : 1;
+ uint32_t chhltdmsk : 1;
+ uint32_t xfercomplmsk : 1;
+ } s;
+};
+typedef union cvmx_usbcx_hcintmskx cvmx_usbcx_hcintmskx_t;
+
+/**
+ * cvmx_usbc#_hcsplt#
+ *
+ * Host Channel-n Split Control Register (HCSPLT)
+ *
+ */
+union cvmx_usbcx_hcspltx {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_hcspltx_s
+ * @spltena: Split Enable (SpltEna)
+ * The application sets this field to indicate that this channel is
+ * enabled to perform split transactions.
+ * @compsplt: Do Complete Split (CompSplt)
+ * The application sets this field to request the OTG host to
+ * perform a complete split transaction.
+ * @xactpos: Transaction Position (XactPos)
+ * This field is used to determine whether to send all, first,
+ * middle, or last payloads with each OUT transaction.
+ * * 2'b11: All. This is the entire data payload is of this
+ * transaction (which is less than or equal to 188 bytes).
+ * * 2'b10: Begin. This is the first data payload of this
+ * transaction (which is larger than 188 bytes).
+ * * 2'b00: Mid. This is the middle payload of this transaction
+ * (which is larger than 188 bytes).
+ * * 2'b01: End. This is the last payload of this transaction
+ * (which is larger than 188 bytes).
+ * @hubaddr: Hub Address (HubAddr)
+ * This field holds the device address of the transaction
+ * translator's hub.
+ * @prtaddr: Port Address (PrtAddr)
+ * This field is the port number of the recipient transaction
+ * translator.
+ */
+ struct cvmx_usbcx_hcspltx_s {
+ uint32_t spltena : 1;
+ uint32_t reserved_17_30 : 14;
+ uint32_t compsplt : 1;
+ uint32_t xactpos : 2;
+ uint32_t hubaddr : 7;
+ uint32_t prtaddr : 7;
+ } s;
+};
+typedef union cvmx_usbcx_hcspltx cvmx_usbcx_hcspltx_t;
+
+/**
+ * cvmx_usbc#_hctsiz#
+ *
+ * Host Channel-n Transfer Size Register (HCTSIZ)
+ *
+ */
+union cvmx_usbcx_hctsizx {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_hctsizx_s
+ * @dopng: Do Ping (DoPng)
+ * Setting this field to 1 directs the host to do PING protocol.
+ * @pid: PID (Pid)
+ * The application programs this field with the type of PID to use
+ * for the initial transaction. The host will maintain this field
+ * for the rest of the transfer.
+ * * 2'b00: DATA0
+ * * 2'b01: DATA2
+ * * 2'b10: DATA1
+ * * 2'b11: MDATA (non-control)/SETUP (control)
+ * @pktcnt: Packet Count (PktCnt)
+ * This field is programmed by the application with the expected
+ * number of packets to be transmitted (OUT) or received (IN).
+ * The host decrements this count on every successful
+ * transmission or reception of an OUT/IN packet. Once this count
+ * reaches zero, the application is interrupted to indicate normal
+ * completion.
+ * @xfersize: Transfer Size (XferSize)
+ * For an OUT, this field is the number of data bytes the host will
+ * send during the transfer.
+ * For an IN, this field is the buffer size that the application
+ * has reserved for the transfer. The application is expected to
+ * program this field as an integer multiple of the maximum packet
+ * size for IN transactions (periodic and non-periodic).
+ */
+ struct cvmx_usbcx_hctsizx_s {
+ uint32_t dopng : 1;
+ uint32_t pid : 2;
+ uint32_t pktcnt : 10;
+ uint32_t xfersize : 19;
+ } s;
+};
+typedef union cvmx_usbcx_hctsizx cvmx_usbcx_hctsizx_t;
+
+/**
+ * cvmx_usbc#_hfir
+ *
+ * Host Frame Interval Register (HFIR)
+ *
+ * This register stores the frame interval information for the current speed to
+ * which the O2P USB core has enumerated.
+ */
+union cvmx_usbcx_hfir {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_hfir_s
+ * @frint: Frame Interval (FrInt)
+ * The value that the application programs to this field specifies
+ * the interval between two consecutive SOFs (FS) or micro-
+ * SOFs (HS) or Keep-Alive tokens (HS). This field contains the
+ * number of PHY clocks that constitute the required frame
+ * interval. The default value set in this field for a FS operation
+ * when the PHY clock frequency is 60 MHz. The application can
+ * write a value to this register only after the Port Enable bit of
+ * the Host Port Control and Status register (HPRT.PrtEnaPort)
+ * has been set. If no value is programmed, the core calculates
+ * the value based on the PHY clock specified in the FS/LS PHY
+ * Clock Select field of the Host Configuration register
+ * (HCFG.FSLSPclkSel). Do not change the value of this field
+ * after the initial configuration.
+ * * 125 us (PHY clock frequency for HS)
+ * * 1 ms (PHY clock frequency for FS/LS)
+ */
+ struct cvmx_usbcx_hfir_s {
+ uint32_t reserved_16_31 : 16;
+ uint32_t frint : 16;
+ } s;
+};
+typedef union cvmx_usbcx_hfir cvmx_usbcx_hfir_t;
+
+/**
+ * cvmx_usbc#_hfnum
+ *
+ * Host Frame Number/Frame Time Remaining Register (HFNUM)
+ *
+ * This register indicates the current frame number.
+ * It also indicates the time remaining (in terms of the number of PHY clocks)
+ * in the current (micro)frame.
+ */
+union cvmx_usbcx_hfnum {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_hfnum_s
+ * @frrem: Frame Time Remaining (FrRem)
+ * Indicates the amount of time remaining in the current
+ * microframe (HS) or frame (FS/LS), in terms of PHY clocks.
+ * This field decrements on each PHY clock. When it reaches
+ * zero, this field is reloaded with the value in the Frame
+ * Interval register and a new SOF is transmitted on the USB.
+ * @frnum: Frame Number (FrNum)
+ * This field increments when a new SOF is transmitted on the
+ * USB, and is reset to 0 when it reaches 16'h3FFF.
+ */
+ struct cvmx_usbcx_hfnum_s {
+ uint32_t frrem : 16;
+ uint32_t frnum : 16;
+ } s;
+};
+typedef union cvmx_usbcx_hfnum cvmx_usbcx_hfnum_t;
+
+/**
+ * cvmx_usbc#_hprt
+ *
+ * Host Port Control and Status Register (HPRT)
+ *
+ * This register is available in both Host and Device modes.
+ * Currently, the OTG Host supports only one port.
+ * A single register holds USB port-related information such as USB reset,
+ * enable, suspend, resume, connect status, and test mode for each port. The
+ * R_SS_WC bits in this register can trigger an interrupt to the application
+ * through the Host Port Interrupt bit of the Core Interrupt register
+ * (GINTSTS.PrtInt). On a Port Interrupt, the application must read this
+ * register and clear the bit that caused the interrupt. For the R_SS_WC bits,
+ * the application must write a 1 to the bit to clear the interrupt.
+ */
+union cvmx_usbcx_hprt {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_hprt_s
+ * @prtspd: Port Speed (PrtSpd)
+ * Indicates the speed of the device attached to this port.
+ * * 2'b00: High speed
+ * * 2'b01: Full speed
+ * * 2'b10: Low speed
+ * * 2'b11: Reserved
+ * @prttstctl: Port Test Control (PrtTstCtl)
+ * The application writes a nonzero value to this field to put
+ * the port into a Test mode, and the corresponding pattern is
+ * signaled on the port.
+ * * 4'b0000: Test mode disabled
+ * * 4'b0001: Test_J mode
+ * * 4'b0010: Test_K mode
+ * * 4'b0011: Test_SE0_NAK mode
+ * * 4'b0100: Test_Packet mode
+ * * 4'b0101: Test_Force_Enable
+ * * Others: Reserved
+ * PrtSpd must be zero (i.e. the interface must be in high-speed
+ * mode) to use the PrtTstCtl test modes.
+ * @prtpwr: Port Power (PrtPwr)
+ * The application uses this field to control power to this port,
+ * and the core clears this bit on an overcurrent condition.
+ * * 1'b0: Power off
+ * * 1'b1: Power on
+ * @prtlnsts: Port Line Status (PrtLnSts)
+ * Indicates the current logic level USB data lines
+ * * Bit [10]: Logic level of D-
+ * * Bit [11]: Logic level of D+
+ * @prtrst: Port Reset (PrtRst)
+ * When the application sets this bit, a reset sequence is
+ * started on this port. The application must time the reset
+ * period and clear this bit after the reset sequence is
+ * complete.
+ * * 1'b0: Port not in reset
+ * * 1'b1: Port in reset
+ * The application must leave this bit set for at least a
+ * minimum duration mentioned below to start a reset on the
+ * port. The application can leave it set for another 10 ms in
+ * addition to the required minimum duration, before clearing
+ * the bit, even though there is no maximum limit set by the
+ * USB standard.
+ * * High speed: 50 ms
+ * * Full speed/Low speed: 10 ms
+ * @prtsusp: Port Suspend (PrtSusp)
+ * The application sets this bit to put this port in Suspend
+ * mode. The core only stops sending SOFs when this is set.
+ * To stop the PHY clock, the application must set the Port
+ * Clock Stop bit, which will assert the suspend input pin of
+ * the PHY.
+ * The read value of this bit reflects the current suspend
+ * status of the port. This bit is cleared by the core after a
+ * remote wakeup signal is detected or the application sets
+ * the Port Reset bit or Port Resume bit in this register or the
+ * Resume/Remote Wakeup Detected Interrupt bit or
+ * Disconnect Detected Interrupt bit in the Core Interrupt
+ * register (GINTSTS.WkUpInt or GINTSTS.DisconnInt,
+ * respectively).
+ * * 1'b0: Port not in Suspend mode
+ * * 1'b1: Port in Suspend mode
+ * @prtres: Port Resume (PrtRes)
+ * The application sets this bit to drive resume signaling on
+ * the port. The core continues to drive the resume signal
+ * until the application clears this bit.
+ * If the core detects a USB remote wakeup sequence, as
+ * indicated by the Port Resume/Remote Wakeup Detected
+ * Interrupt bit of the Core Interrupt register
+ * (GINTSTS.WkUpInt), the core starts driving resume
+ * signaling without application intervention and clears this bit
+ * when it detects a disconnect condition. The read value of
+ * this bit indicates whether the core is currently driving
+ * resume signaling.
+ * * 1'b0: No resume driven
+ * * 1'b1: Resume driven
+ * @prtovrcurrchng: Port Overcurrent Change (PrtOvrCurrChng)
+ * The core sets this bit when the status of the Port
+ * Overcurrent Active bit (bit 4) in this register changes.
+ * @prtovrcurract: Port Overcurrent Active (PrtOvrCurrAct)
+ * Indicates the overcurrent condition of the port.
+ * * 1'b0: No overcurrent condition
+ * * 1'b1: Overcurrent condition
+ * @prtenchng: Port Enable/Disable Change (PrtEnChng)
+ * The core sets this bit when the status of the Port Enable bit
+ * [2] of this register changes.
+ * @prtena: Port Enable (PrtEna)
+ * A port is enabled only by the core after a reset sequence,
+ * and is disabled by an overcurrent condition, a disconnect
+ * condition, or by the application clearing this bit. The
+ * application cannot set this bit by a register write. It can only
+ * clear it to disable the port. This bit does not trigger any
+ * interrupt to the application.
+ * * 1'b0: Port disabled
+ * * 1'b1: Port enabled
+ * @prtconndet: Port Connect Detected (PrtConnDet)
+ * The core sets this bit when a device connection is detected
+ * to trigger an interrupt to the application using the Host Port
+ * Interrupt bit of the Core Interrupt register (GINTSTS.PrtInt).
+ * The application must write a 1 to this bit to clear the
+ * interrupt.
+ * @prtconnsts: Port Connect Status (PrtConnSts)
+ * * 0: No device is attached to the port.
+ * * 1: A device is attached to the port.
+ */
+ struct cvmx_usbcx_hprt_s {
+ uint32_t reserved_19_31 : 13;
+ uint32_t prtspd : 2;
+ uint32_t prttstctl : 4;
+ uint32_t prtpwr : 1;
+ uint32_t prtlnsts : 2;
+ uint32_t reserved_9_9 : 1;
+ uint32_t prtrst : 1;
+ uint32_t prtsusp : 1;
+ uint32_t prtres : 1;
+ uint32_t prtovrcurrchng : 1;
+ uint32_t prtovrcurract : 1;
+ uint32_t prtenchng : 1;
+ uint32_t prtena : 1;
+ uint32_t prtconndet : 1;
+ uint32_t prtconnsts : 1;
+ } s;
+};
+typedef union cvmx_usbcx_hprt cvmx_usbcx_hprt_t;
+
+/**
+ * cvmx_usbc#_hptxfsiz
+ *
+ * Host Periodic Transmit FIFO Size Register (HPTXFSIZ)
+ *
+ * This register holds the size and the memory start address of the Periodic
+ * TxFIFO, as shown in Figures 310 and 311.
+ */
+union cvmx_usbcx_hptxfsiz {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_hptxfsiz_s
+ * @ptxfsize: Host Periodic TxFIFO Depth (PTxFSize)
+ * This value is in terms of 32-bit words.
+ * * Minimum value is 16
+ * * Maximum value is 32768
+ * @ptxfstaddr: Host Periodic TxFIFO Start Address (PTxFStAddr)
+ */
+ struct cvmx_usbcx_hptxfsiz_s {
+ uint32_t ptxfsize : 16;
+ uint32_t ptxfstaddr : 16;
+ } s;
+};
+typedef union cvmx_usbcx_hptxfsiz cvmx_usbcx_hptxfsiz_t;
+
+/**
+ * cvmx_usbc#_hptxsts
+ *
+ * Host Periodic Transmit FIFO/Queue Status Register (HPTXSTS)
+ *
+ * This read-only register contains the free space information for the Periodic
+ * TxFIFO and the Periodic Transmit Request Queue
+ */
+union cvmx_usbcx_hptxsts {
+ uint32_t u32;
+ /**
+ * struct cvmx_usbcx_hptxsts_s
+ * @ptxqtop: Top of the Periodic Transmit Request Queue (PTxQTop)
+ * This indicates the entry in the Periodic Tx Request Queue that
+ * is currently being processes by the MAC.
+ * This register is used for debugging.
+ * * Bit [31]: Odd/Even (micro)frame
+ * - 1'b0: send in even (micro)frame
+ * - 1'b1: send in odd (micro)frame
+ * * Bits [30:27]: Channel/endpoint number
+ * * Bits [26:25]: Type
+ * - 2'b00: IN/OUT
+ * - 2'b01: Zero-length packet
+ * - 2'b10: CSPLIT
+ * - 2'b11: Disable channel command
+ * * Bit [24]: Terminate (last entry for the selected
+ * channel/endpoint)
+ * @ptxqspcavail: Periodic Transmit Request Queue Space Available
+ * (PTxQSpcAvail)
+ * Indicates the number of free locations available to be written
+ * in the Periodic Transmit Request Queue. This queue holds both
+ * IN and OUT requests.
+ * * 8'h0: Periodic Transmit Request Queue is full
+ * * 8'h1: 1 location available
+ * * 8'h2: 2 locations available
+ * * n: n locations available (0..8)
+ * * Others: Reserved
+ * @ptxfspcavail: Periodic Transmit Data FIFO Space Available
+ * (PTxFSpcAvail)
+ * Indicates the number of free locations available to be written
+ * to in the Periodic TxFIFO.
+ * Values are in terms of 32-bit words
+ * * 16'h0: Periodic TxFIFO is full
+ * * 16'h1: 1 word available
+ * * 16'h2: 2 words available
+ * * 16'hn: n words available (where 0..32768)
+ * * 16'h8000: 32768 words available
+ * * Others: Reserved
+ */
+ struct cvmx_usbcx_hptxsts_s {
+ uint32_t ptxqtop : 8;
+ uint32_t ptxqspcavail : 8;
+ uint32_t ptxfspcavail : 16;
+ } s;
+};
+typedef union cvmx_usbcx_hptxsts cvmx_usbcx_hptxsts_t;
+
+#endif
--- /dev/null
+/***********************license start***************
+ * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+
+ * * Neither the name of Cavium Networks nor the names of
+ * its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written
+ * permission.
+
+ * This Software, including technical data, may be subject to U.S. export
+ * control laws, including the U.S. Export Administration Act and its associated
+ * regulations, and may be subject to export or import regulations in other
+ * countries.
+
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+ * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
+ * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
+ * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION
+ * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+ ***********************license end**************************************/
+
+
+/**
+ * cvmx-usbnx-defs.h
+ *
+ * Configuration and status register (CSR) type definitions for
+ * Octeon usbnx.
+ *
+ */
+#ifndef __CVMX_USBNX_TYPEDEFS_H__
+#define __CVMX_USBNX_TYPEDEFS_H__
+
+#define CVMX_USBNXBID1(bid) (((bid) & 1) * 0x10000000ull)
+#define CVMX_USBNXBID2(bid) (((bid) & 1) * 0x100000000000ull)
+
+#define CVMX_USBNXREG1(reg, bid) \
+ (CVMX_ADD_IO_SEG(0x0001180068000000ull | reg) + CVMX_USBNXBID1(bid))
+#define CVMX_USBNXREG2(reg, bid) \
+ (CVMX_ADD_IO_SEG(0x00016F0000000000ull | reg) + CVMX_USBNXBID2(bid))
+
+#define CVMX_USBNX_CLK_CTL(bid) CVMX_USBNXREG1(0x10, bid)
+#define CVMX_USBNX_DMA0_INB_CHN0(bid) CVMX_USBNXREG2(0x818, bid)
+#define CVMX_USBNX_DMA0_OUTB_CHN0(bid) CVMX_USBNXREG2(0x858, bid)
+#define CVMX_USBNX_USBP_CTL_STATUS(bid) CVMX_USBNXREG1(0x18, bid)
+
+/**
+ * cvmx_usbn#_clk_ctl
+ *
+ * USBN_CLK_CTL = USBN's Clock Control
+ *
+ * This register is used to control the frequency of the hclk and the
+ * hreset and phy_rst signals.
+ */
+union cvmx_usbnx_clk_ctl {
+ uint64_t u64;
+ /**
+ * struct cvmx_usbnx_clk_ctl_s
+ * @divide2: The 'hclk' used by the USB subsystem is derived
+ * from the eclk.
+ * Also see the field DIVIDE. DIVIDE2<1> must currently
+ * be zero because it is not implemented, so the maximum
+ * ratio of eclk/hclk is currently 16.
+ * The actual divide number for hclk is:
+ * (DIVIDE2 + 1) * (DIVIDE + 1)
+ * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
+ * generate the hclk in the USB Subsystem is held
+ * in reset. This bit must be set to '0' before
+ * changing the value os DIVIDE in this register.
+ * The reset to the HCLK_DIVIDERis also asserted
+ * when core reset is asserted.
+ * @p_x_on: Force USB-PHY on during suspend.
+ * '1' USB-PHY XO block is powered-down during
+ * suspend.
+ * '0' USB-PHY XO block is powered-up during
+ * suspend.
+ * The value of this field must be set while POR is
+ * active.
+ * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
+ * remain powered in Suspend Mode.
+ * '1' The USB-PHY XO Bias, Bandgap and PLL are
+ * powered down in suspend mode.
+ * The value of this field must be set while POR is
+ * active.
+ * @p_c_sel: Phy clock speed select.
+ * Selects the reference clock / crystal frequency.
+ * '11': Reserved
+ * '10': 48 MHz (reserved when a crystal is used)
+ * '01': 24 MHz (reserved when a crystal is used)
+ * '00': 12 MHz
+ * The value of this field must be set while POR is
+ * active.
+ * NOTE: if a crystal is used as a reference clock,
+ * this field must be set to 12 MHz.
+ * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
+ * @sd_mode: Scaledown mode for the USBC. Control timing events
+ * in the USBC, for normal operation this must be '0'.
+ * @s_bist: Starts bist on the hclk memories, during the '0'
+ * to '1' transition.
+ * @por: Power On Reset for the PHY.
+ * Resets all the PHYS registers and state machines.
+ * @enable: When '1' allows the generation of the hclk. When
+ * '0' the hclk will not be generated. SEE DIVIDE
+ * field of this register.
+ * @prst: When this field is '0' the reset associated with
+ * the phy_clk functionality in the USB Subsystem is
+ * help in reset. This bit should not be set to '1'
+ * until the time it takes 6 clocks (hclk or phy_clk,
+ * whichever is slower) has passed. Under normal
+ * operation once this bit is set to '1' it should not
+ * be set to '0'.
+ * @hrst: When this field is '0' the reset associated with
+ * the hclk functioanlity in the USB Subsystem is
+ * held in reset.This bit should not be set to '1'
+ * until 12ms after phy_clk is stable. Under normal
+ * operation, once this bit is set to '1' it should
+ * not be set to '0'.
+ * @divide: The frequency of 'hclk' used by the USB subsystem
+ * is the eclk frequency divided by the value of
+ * (DIVIDE2 + 1) * (DIVIDE + 1), also see the field
+ * DIVIDE2 of this register.
+ * The hclk frequency should be less than 125Mhz.
+ * After writing a value to this field the SW should
+ * read the field for the value written.
+ * The ENABLE field of this register should not be set
+ * until AFTER this field is set and then read.
+ */
+ struct cvmx_usbnx_clk_ctl_s {
+ uint64_t reserved_20_63 : 44;
+ uint64_t divide2 : 2;
+ uint64_t hclk_rst : 1;
+ uint64_t p_x_on : 1;
+ uint64_t reserved_14_15 : 2;
+ uint64_t p_com_on : 1;
+ uint64_t p_c_sel : 2;
+ uint64_t cdiv_byp : 1;
+ uint64_t sd_mode : 2;
+ uint64_t s_bist : 1;
+ uint64_t por : 1;
+ uint64_t enable : 1;
+ uint64_t prst : 1;
+ uint64_t hrst : 1;
+ uint64_t divide : 3;
+ } s;
+ /**
+ * struct cvmx_usbnx_clk_ctl_cn30xx
+ * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
+ * generate the hclk in the USB Subsystem is held
+ * in reset. This bit must be set to '0' before
+ * changing the value os DIVIDE in this register.
+ * The reset to the HCLK_DIVIDERis also asserted
+ * when core reset is asserted.
+ * @p_x_on: Force USB-PHY on during suspend.
+ * '1' USB-PHY XO block is powered-down during
+ * suspend.
+ * '0' USB-PHY XO block is powered-up during
+ * suspend.
+ * The value of this field must be set while POR is
+ * active.
+ * @p_rclk: Phy refrence clock enable.
+ * '1' The PHY PLL uses the XO block output as a
+ * reference.
+ * '0' Reserved.
+ * @p_xenbn: Phy external clock enable.
+ * '1' The XO block uses the clock from a crystal.
+ * '0' The XO block uses an external clock supplied
+ * on the XO pin. USB_XI should be tied to
+ * ground for this usage.
+ * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
+ * remain powered in Suspend Mode.
+ * '1' The USB-PHY XO Bias, Bandgap and PLL are
+ * powered down in suspend mode.
+ * The value of this field must be set while POR is
+ * active.
+ * @p_c_sel: Phy clock speed select.
+ * Selects the reference clock / crystal frequency.
+ * '11': Reserved
+ * '10': 48 MHz
+ * '01': 24 MHz
+ * '00': 12 MHz
+ * The value of this field must be set while POR is
+ * active.
+ * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
+ * @sd_mode: Scaledown mode for the USBC. Control timing events
+ * in the USBC, for normal operation this must be '0'.
+ * @s_bist: Starts bist on the hclk memories, during the '0'
+ * to '1' transition.
+ * @por: Power On Reset for the PHY.
+ * Resets all the PHYS registers and state machines.
+ * @enable: When '1' allows the generation of the hclk. When
+ * '0' the hclk will not be generated.
+ * @prst: When this field is '0' the reset associated with
+ * the phy_clk functionality in the USB Subsystem is
+ * help in reset. This bit should not be set to '1'
+ * until the time it takes 6 clocks (hclk or phy_clk,
+ * whichever is slower) has passed. Under normal
+ * operation once this bit is set to '1' it should not
+ * be set to '0'.
+ * @hrst: When this field is '0' the reset associated with
+ * the hclk functioanlity in the USB Subsystem is
+ * held in reset.This bit should not be set to '1'
+ * until 12ms after phy_clk is stable. Under normal
+ * operation, once this bit is set to '1' it should
+ * not be set to '0'.
+ * @divide: The 'hclk' used by the USB subsystem is derived
+ * from the eclk. The eclk will be divided by the
+ * value of this field +1 to determine the hclk
+ * frequency. (Also see HRST of this register).
+ * The hclk frequency must be less than 125 MHz.
+ */
+ struct cvmx_usbnx_clk_ctl_cn30xx {
+ uint64_t reserved_18_63 : 46;
+ uint64_t hclk_rst : 1;
+ uint64_t p_x_on : 1;
+ uint64_t p_rclk : 1;
+ uint64_t p_xenbn : 1;
+ uint64_t p_com_on : 1;
+ uint64_t p_c_sel : 2;
+ uint64_t cdiv_byp : 1;
+ uint64_t sd_mode : 2;
+ uint64_t s_bist : 1;
+ uint64_t por : 1;
+ uint64_t enable : 1;
+ uint64_t prst : 1;
+ uint64_t hrst : 1;
+ uint64_t divide : 3;
+ } cn30xx;
+ struct cvmx_usbnx_clk_ctl_cn30xx cn31xx;
+ /**
+ * struct cvmx_usbnx_clk_ctl_cn50xx
+ * @divide2: The 'hclk' used by the USB subsystem is derived
+ * from the eclk.
+ * Also see the field DIVIDE. DIVIDE2<1> must currently
+ * be zero because it is not implemented, so the maximum
+ * ratio of eclk/hclk is currently 16.
+ * The actual divide number for hclk is:
+ * (DIVIDE2 + 1) * (DIVIDE + 1)
+ * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to
+ * generate the hclk in the USB Subsystem is held
+ * in reset. This bit must be set to '0' before
+ * changing the value os DIVIDE in this register.
+ * The reset to the HCLK_DIVIDERis also asserted
+ * when core reset is asserted.
+ * @p_rtype: PHY reference clock type
+ * '0' The USB-PHY uses a 12MHz crystal as a clock
+ * source at the USB_XO and USB_XI pins
+ * '1' Reserved
+ * '2' The USB_PHY uses 12/24/48MHz 2.5V board clock
+ * at the USB_XO pin. USB_XI should be tied to
+ * ground in this case.
+ * '3' Reserved
+ * (bit 14 was P_XENBN on 3xxx)
+ * (bit 15 was P_RCLK on 3xxx)
+ * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to
+ * remain powered in Suspend Mode.
+ * '1' The USB-PHY XO Bias, Bandgap and PLL are
+ * powered down in suspend mode.
+ * The value of this field must be set while POR is
+ * active.
+ * @p_c_sel: Phy clock speed select.
+ * Selects the reference clock / crystal frequency.
+ * '11': Reserved
+ * '10': 48 MHz (reserved when a crystal is used)
+ * '01': 24 MHz (reserved when a crystal is used)
+ * '00': 12 MHz
+ * The value of this field must be set while POR is
+ * active.
+ * NOTE: if a crystal is used as a reference clock,
+ * this field must be set to 12 MHz.
+ * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV.
+ * @sd_mode: Scaledown mode for the USBC. Control timing events
+ * in the USBC, for normal operation this must be '0'.
+ * @s_bist: Starts bist on the hclk memories, during the '0'
+ * to '1' transition.
+ * @por: Power On Reset for the PHY.
+ * Resets all the PHYS registers and state machines.
+ * @enable: When '1' allows the generation of the hclk. When
+ * '0' the hclk will not be generated. SEE DIVIDE
+ * field of this register.
+ * @prst: When this field is '0' the reset associated with
+ * the phy_clk functionality in the USB Subsystem is
+ * help in reset. This bit should not be set to '1'
+ * until the time it takes 6 clocks (hclk or phy_clk,
+ * whichever is slower) has passed. Under normal
+ * operation once this bit is set to '1' it should not
+ * be set to '0'.
+ * @hrst: When this field is '0' the reset associated with
+ * the hclk functioanlity in the USB Subsystem is
+ * held in reset.This bit should not be set to '1'
+ * until 12ms after phy_clk is stable. Under normal
+ * operation, once this bit is set to '1' it should
+ * not be set to '0'.
+ * @divide: The frequency of 'hclk' used by the USB subsystem
+ * is the eclk frequency divided by the value of
+ * (DIVIDE2 + 1) * (DIVIDE + 1), also see the field
+ * DIVIDE2 of this register.
+ * The hclk frequency should be less than 125Mhz.
+ * After writing a value to this field the SW should
+ * read the field for the value written.
+ * The ENABLE field of this register should not be set
+ * until AFTER this field is set and then read.
+ */
+ struct cvmx_usbnx_clk_ctl_cn50xx {
+ uint64_t reserved_20_63 : 44;
+ uint64_t divide2 : 2;
+ uint64_t hclk_rst : 1;
+ uint64_t reserved_16_16 : 1;
+ uint64_t p_rtype : 2;
+ uint64_t p_com_on : 1;
+ uint64_t p_c_sel : 2;
+ uint64_t cdiv_byp : 1;
+ uint64_t sd_mode : 2;
+ uint64_t s_bist : 1;
+ uint64_t por : 1;
+ uint64_t enable : 1;
+ uint64_t prst : 1;
+ uint64_t hrst : 1;
+ uint64_t divide : 3;
+ } cn50xx;
+ struct cvmx_usbnx_clk_ctl_cn50xx cn52xx;
+ struct cvmx_usbnx_clk_ctl_cn50xx cn56xx;
+};
+typedef union cvmx_usbnx_clk_ctl cvmx_usbnx_clk_ctl_t;
+
+/**
+ * cvmx_usbn#_usbp_ctl_status
+ *
+ * USBN_USBP_CTL_STATUS = USBP Control And Status Register
+ *
+ * Contains general control and status information for the USBN block.
+ */
+union cvmx_usbnx_usbp_ctl_status {
+ uint64_t u64;
+ /**
+ * struct cvmx_usbnx_usbp_ctl_status_s
+ * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
+ * @txvreftune: HS DC Voltage Level Adjustment
+ * @txfslstune: FS/LS Source Impedence Adjustment
+ * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
+ * @sqrxtune: Squelch Threshold Adjustment
+ * @compdistune: Disconnect Threshold Adjustment
+ * @otgtune: VBUS Valid Threshold Adjustment
+ * @otgdisable: OTG Block Disable
+ * @portreset: Per_Port Reset
+ * @drvvbus: Drive VBUS
+ * @lsbist: Low-Speed BIST Enable.
+ * @fsbist: Full-Speed BIST Enable.
+ * @hsbist: High-Speed BIST Enable.
+ * @bist_done: PHY Bist Done.
+ * Asserted at the end of the PHY BIST sequence.
+ * @bist_err: PHY Bist Error.
+ * Indicates an internal error was detected during
+ * the BIST sequence.
+ * @tdata_out: PHY Test Data Out.
+ * Presents either internaly generated signals or
+ * test register contents, based upon the value of
+ * test_data_out_sel.
+ * @siddq: Drives the USBP (USB-PHY) SIDDQ input.
+ * Normally should be set to zero.
+ * When customers have no intent to use USB PHY
+ * interface, they should:
+ * - still provide 3.3V to USB_VDD33, and
+ * - tie USB_REXT to 3.3V supply, and
+ * - set USBN*_USBP_CTL_STATUS[SIDDQ]=1
+ * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
+ * @dma_bmode: When set to 1 the L2C DMA address will be updated
+ * with byte-counts between packets. When set to 0
+ * the L2C DMA address is incremented to the next
+ * 4-byte aligned address after adding byte-count.
+ * @usbc_end: Bigendian input to the USB Core. This should be
+ * set to '0' for operation.
+ * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
+ * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
+ * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
+ * This signal enables the pull-down resistance on
+ * the D+ line. '1' pull down-resistance is connected
+ * to D+/ '0' pull down resistance is not connected
+ * to D+. When an A/B device is acting as a host
+ * (downstream-facing port), dp_pulldown and
+ * dm_pulldown are enabled. This must not toggle
+ * during normal opeartion.
+ * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
+ * This signal enables the pull-down resistance on
+ * the D- line. '1' pull down-resistance is connected
+ * to D-. '0' pull down resistance is not connected
+ * to D-. When an A/B device is acting as a host
+ * (downstream-facing port), dp_pulldown and
+ * dm_pulldown are enabled. This must not toggle
+ * during normal opeartion.
+ * @hst_mode: When '0' the USB is acting as HOST, when '1'
+ * USB is acting as device. This field needs to be
+ * set while the USB is in reset.
+ * @tuning: Transmitter Tuning for High-Speed Operation.
+ * Tunes the current supply and rise/fall output
+ * times for high-speed operation.
+ * [20:19] == 11: Current supply increased
+ * approximately 9%
+ * [20:19] == 10: Current supply increased
+ * approximately 4.5%
+ * [20:19] == 01: Design default.
+ * [20:19] == 00: Current supply decreased
+ * approximately 4.5%
+ * [22:21] == 11: Rise and fall times are increased.
+ * [22:21] == 10: Design default.
+ * [22:21] == 01: Rise and fall times are decreased.
+ * [22:21] == 00: Rise and fall times are decreased
+ * further as compared to the 01 setting.
+ * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
+ * Enables or disables bit stuffing on data[15:8]
+ * when bit-stuffing is enabled.
+ * @tx_bs_en: Transmit Bit Stuffing on [7:0].
+ * Enables or disables bit stuffing on data[7:0]
+ * when bit-stuffing is enabled.
+ * @loop_enb: PHY Loopback Test Enable.
+ * '1': During data transmission the receive is
+ * enabled.
+ * '0': During data transmission the receive is
+ * disabled.
+ * Must be '0' for normal operation.
+ * @vtest_enb: Analog Test Pin Enable.
+ * '1' The PHY's analog_test pin is enabled for the
+ * input and output of applicable analog test signals.
+ * '0' THe analog_test pin is disabled.
+ * @bist_enb: Built-In Self Test Enable.
+ * Used to activate BIST in the PHY.
+ * @tdata_sel: Test Data Out Select.
+ * '1' test_data_out[3:0] (PHY) register contents
+ * are output. '0' internaly generated signals are
+ * output.
+ * @taddr_in: Mode Address for Test Interface.
+ * Specifies the register address for writing to or
+ * reading from the PHY test interface register.
+ * @tdata_in: Internal Testing Register Input Data and Select
+ * This is a test bus. Data is present on [3:0],
+ * and its corresponding select (enable) is present
+ * on bits [7:4].
+ * @ate_reset: Reset input from automatic test equipment.
+ * This is a test signal. When the USB Core is
+ * powered up (not in Susned Mode), an automatic
+ * tester can use this to disable phy_clock and
+ * free_clk, then re-eanable them with an aligned
+ * phase.
+ * '1': The phy_clk and free_clk outputs are
+ * disabled. "0": The phy_clock and free_clk outputs
+ * are available within a specific period after the
+ * de-assertion.
+ */
+ struct cvmx_usbnx_usbp_ctl_status_s {
+ uint64_t txrisetune : 1;
+ uint64_t txvreftune : 4;
+ uint64_t txfslstune : 4;
+ uint64_t txhsxvtune : 2;
+ uint64_t sqrxtune : 3;
+ uint64_t compdistune : 3;
+ uint64_t otgtune : 3;
+ uint64_t otgdisable : 1;
+ uint64_t portreset : 1;
+ uint64_t drvvbus : 1;
+ uint64_t lsbist : 1;
+ uint64_t fsbist : 1;
+ uint64_t hsbist : 1;
+ uint64_t bist_done : 1;
+ uint64_t bist_err : 1;
+ uint64_t tdata_out : 4;
+ uint64_t siddq : 1;
+ uint64_t txpreemphasistune : 1;
+ uint64_t dma_bmode : 1;
+ uint64_t usbc_end : 1;
+ uint64_t usbp_bist : 1;
+ uint64_t tclk : 1;
+ uint64_t dp_pulld : 1;
+ uint64_t dm_pulld : 1;
+ uint64_t hst_mode : 1;
+ uint64_t tuning : 4;
+ uint64_t tx_bs_enh : 1;
+ uint64_t tx_bs_en : 1;
+ uint64_t loop_enb : 1;
+ uint64_t vtest_enb : 1;
+ uint64_t bist_enb : 1;
+ uint64_t tdata_sel : 1;
+ uint64_t taddr_in : 4;
+ uint64_t tdata_in : 8;
+ uint64_t ate_reset : 1;
+ } s;
+ /**
+ * struct cvmx_usbnx_usbp_ctl_status_cn30xx
+ * @bist_done: PHY Bist Done.
+ * Asserted at the end of the PHY BIST sequence.
+ * @bist_err: PHY Bist Error.
+ * Indicates an internal error was detected during
+ * the BIST sequence.
+ * @tdata_out: PHY Test Data Out.
+ * Presents either internaly generated signals or
+ * test register contents, based upon the value of
+ * test_data_out_sel.
+ * @dma_bmode: When set to 1 the L2C DMA address will be updated
+ * with byte-counts between packets. When set to 0
+ * the L2C DMA address is incremented to the next
+ * 4-byte aligned address after adding byte-count.
+ * @usbc_end: Bigendian input to the USB Core. This should be
+ * set to '0' for operation.
+ * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
+ * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
+ * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
+ * This signal enables the pull-down resistance on
+ * the D+ line. '1' pull down-resistance is connected
+ * to D+/ '0' pull down resistance is not connected
+ * to D+. When an A/B device is acting as a host
+ * (downstream-facing port), dp_pulldown and
+ * dm_pulldown are enabled. This must not toggle
+ * during normal opeartion.
+ * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
+ * This signal enables the pull-down resistance on
+ * the D- line. '1' pull down-resistance is connected
+ * to D-. '0' pull down resistance is not connected
+ * to D-. When an A/B device is acting as a host
+ * (downstream-facing port), dp_pulldown and
+ * dm_pulldown are enabled. This must not toggle
+ * during normal opeartion.
+ * @hst_mode: When '0' the USB is acting as HOST, when '1'
+ * USB is acting as device. This field needs to be
+ * set while the USB is in reset.
+ * @tuning: Transmitter Tuning for High-Speed Operation.
+ * Tunes the current supply and rise/fall output
+ * times for high-speed operation.
+ * [20:19] == 11: Current supply increased
+ * approximately 9%
+ * [20:19] == 10: Current supply increased
+ * approximately 4.5%
+ * [20:19] == 01: Design default.
+ * [20:19] == 00: Current supply decreased
+ * approximately 4.5%
+ * [22:21] == 11: Rise and fall times are increased.
+ * [22:21] == 10: Design default.
+ * [22:21] == 01: Rise and fall times are decreased.
+ * [22:21] == 00: Rise and fall times are decreased
+ * further as compared to the 01 setting.
+ * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
+ * Enables or disables bit stuffing on data[15:8]
+ * when bit-stuffing is enabled.
+ * @tx_bs_en: Transmit Bit Stuffing on [7:0].
+ * Enables or disables bit stuffing on data[7:0]
+ * when bit-stuffing is enabled.
+ * @loop_enb: PHY Loopback Test Enable.
+ * '1': During data transmission the receive is
+ * enabled.
+ * '0': During data transmission the receive is
+ * disabled.
+ * Must be '0' for normal operation.
+ * @vtest_enb: Analog Test Pin Enable.
+ * '1' The PHY's analog_test pin is enabled for the
+ * input and output of applicable analog test signals.
+ * '0' THe analog_test pin is disabled.
+ * @bist_enb: Built-In Self Test Enable.
+ * Used to activate BIST in the PHY.
+ * @tdata_sel: Test Data Out Select.
+ * '1' test_data_out[3:0] (PHY) register contents
+ * are output. '0' internaly generated signals are
+ * output.
+ * @taddr_in: Mode Address for Test Interface.
+ * Specifies the register address for writing to or
+ * reading from the PHY test interface register.
+ * @tdata_in: Internal Testing Register Input Data and Select
+ * This is a test bus. Data is present on [3:0],
+ * and its corresponding select (enable) is present
+ * on bits [7:4].
+ * @ate_reset: Reset input from automatic test equipment.
+ * This is a test signal. When the USB Core is
+ * powered up (not in Susned Mode), an automatic
+ * tester can use this to disable phy_clock and
+ * free_clk, then re-eanable them with an aligned
+ * phase.
+ * '1': The phy_clk and free_clk outputs are
+ * disabled. "0": The phy_clock and free_clk outputs
+ * are available within a specific period after the
+ * de-assertion.
+ */
+ struct cvmx_usbnx_usbp_ctl_status_cn30xx {
+ uint64_t reserved_38_63 : 26;
+ uint64_t bist_done : 1;
+ uint64_t bist_err : 1;
+ uint64_t tdata_out : 4;
+ uint64_t reserved_30_31 : 2;
+ uint64_t dma_bmode : 1;
+ uint64_t usbc_end : 1;
+ uint64_t usbp_bist : 1;
+ uint64_t tclk : 1;
+ uint64_t dp_pulld : 1;
+ uint64_t dm_pulld : 1;
+ uint64_t hst_mode : 1;
+ uint64_t tuning : 4;
+ uint64_t tx_bs_enh : 1;
+ uint64_t tx_bs_en : 1;
+ uint64_t loop_enb : 1;
+ uint64_t vtest_enb : 1;
+ uint64_t bist_enb : 1;
+ uint64_t tdata_sel : 1;
+ uint64_t taddr_in : 4;
+ uint64_t tdata_in : 8;
+ uint64_t ate_reset : 1;
+ } cn30xx;
+ /**
+ * struct cvmx_usbnx_usbp_ctl_status_cn50xx
+ * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
+ * @txvreftune: HS DC Voltage Level Adjustment
+ * @txfslstune: FS/LS Source Impedence Adjustment
+ * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
+ * @sqrxtune: Squelch Threshold Adjustment
+ * @compdistune: Disconnect Threshold Adjustment
+ * @otgtune: VBUS Valid Threshold Adjustment
+ * @otgdisable: OTG Block Disable
+ * @portreset: Per_Port Reset
+ * @drvvbus: Drive VBUS
+ * @lsbist: Low-Speed BIST Enable.
+ * @fsbist: Full-Speed BIST Enable.
+ * @hsbist: High-Speed BIST Enable.
+ * @bist_done: PHY Bist Done.
+ * Asserted at the end of the PHY BIST sequence.
+ * @bist_err: PHY Bist Error.
+ * Indicates an internal error was detected during
+ * the BIST sequence.
+ * @tdata_out: PHY Test Data Out.
+ * Presents either internaly generated signals or
+ * test register contents, based upon the value of
+ * test_data_out_sel.
+ * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
+ * @dma_bmode: When set to 1 the L2C DMA address will be updated
+ * with byte-counts between packets. When set to 0
+ * the L2C DMA address is incremented to the next
+ * 4-byte aligned address after adding byte-count.
+ * @usbc_end: Bigendian input to the USB Core. This should be
+ * set to '0' for operation.
+ * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
+ * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
+ * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
+ * This signal enables the pull-down resistance on
+ * the D+ line. '1' pull down-resistance is connected
+ * to D+/ '0' pull down resistance is not connected
+ * to D+. When an A/B device is acting as a host
+ * (downstream-facing port), dp_pulldown and
+ * dm_pulldown are enabled. This must not toggle
+ * during normal opeartion.
+ * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
+ * This signal enables the pull-down resistance on
+ * the D- line. '1' pull down-resistance is connected
+ * to D-. '0' pull down resistance is not connected
+ * to D-. When an A/B device is acting as a host
+ * (downstream-facing port), dp_pulldown and
+ * dm_pulldown are enabled. This must not toggle
+ * during normal opeartion.
+ * @hst_mode: When '0' the USB is acting as HOST, when '1'
+ * USB is acting as device. This field needs to be
+ * set while the USB is in reset.
+ * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
+ * Enables or disables bit stuffing on data[15:8]
+ * when bit-stuffing is enabled.
+ * @tx_bs_en: Transmit Bit Stuffing on [7:0].
+ * Enables or disables bit stuffing on data[7:0]
+ * when bit-stuffing is enabled.
+ * @loop_enb: PHY Loopback Test Enable.
+ * '1': During data transmission the receive is
+ * enabled.
+ * '0': During data transmission the receive is
+ * disabled.
+ * Must be '0' for normal operation.
+ * @vtest_enb: Analog Test Pin Enable.
+ * '1' The PHY's analog_test pin is enabled for the
+ * input and output of applicable analog test signals.
+ * '0' THe analog_test pin is disabled.
+ * @bist_enb: Built-In Self Test Enable.
+ * Used to activate BIST in the PHY.
+ * @tdata_sel: Test Data Out Select.
+ * '1' test_data_out[3:0] (PHY) register contents
+ * are output. '0' internaly generated signals are
+ * output.
+ * @taddr_in: Mode Address for Test Interface.
+ * Specifies the register address for writing to or
+ * reading from the PHY test interface register.
+ * @tdata_in: Internal Testing Register Input Data and Select
+ * This is a test bus. Data is present on [3:0],
+ * and its corresponding select (enable) is present
+ * on bits [7:4].
+ * @ate_reset: Reset input from automatic test equipment.
+ * This is a test signal. When the USB Core is
+ * powered up (not in Susned Mode), an automatic
+ * tester can use this to disable phy_clock and
+ * free_clk, then re-eanable them with an aligned
+ * phase.
+ * '1': The phy_clk and free_clk outputs are
+ * disabled. "0": The phy_clock and free_clk outputs
+ * are available within a specific period after the
+ * de-assertion.
+ */
+ struct cvmx_usbnx_usbp_ctl_status_cn50xx {
+ uint64_t txrisetune : 1;
+ uint64_t txvreftune : 4;
+ uint64_t txfslstune : 4;
+ uint64_t txhsxvtune : 2;
+ uint64_t sqrxtune : 3;
+ uint64_t compdistune : 3;
+ uint64_t otgtune : 3;
+ uint64_t otgdisable : 1;
+ uint64_t portreset : 1;
+ uint64_t drvvbus : 1;
+ uint64_t lsbist : 1;
+ uint64_t fsbist : 1;
+ uint64_t hsbist : 1;
+ uint64_t bist_done : 1;
+ uint64_t bist_err : 1;
+ uint64_t tdata_out : 4;
+ uint64_t reserved_31_31 : 1;
+ uint64_t txpreemphasistune : 1;
+ uint64_t dma_bmode : 1;
+ uint64_t usbc_end : 1;
+ uint64_t usbp_bist : 1;
+ uint64_t tclk : 1;
+ uint64_t dp_pulld : 1;
+ uint64_t dm_pulld : 1;
+ uint64_t hst_mode : 1;
+ uint64_t reserved_19_22 : 4;
+ uint64_t tx_bs_enh : 1;
+ uint64_t tx_bs_en : 1;
+ uint64_t loop_enb : 1;
+ uint64_t vtest_enb : 1;
+ uint64_t bist_enb : 1;
+ uint64_t tdata_sel : 1;
+ uint64_t taddr_in : 4;
+ uint64_t tdata_in : 8;
+ uint64_t ate_reset : 1;
+ } cn50xx;
+ /**
+ * struct cvmx_usbnx_usbp_ctl_status_cn52xx
+ * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
+ * @txvreftune: HS DC Voltage Level Adjustment
+ * @txfslstune: FS/LS Source Impedence Adjustment
+ * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
+ * @sqrxtune: Squelch Threshold Adjustment
+ * @compdistune: Disconnect Threshold Adjustment
+ * @otgtune: VBUS Valid Threshold Adjustment
+ * @otgdisable: OTG Block Disable
+ * @portreset: Per_Port Reset
+ * @drvvbus: Drive VBUS
+ * @lsbist: Low-Speed BIST Enable.
+ * @fsbist: Full-Speed BIST Enable.
+ * @hsbist: High-Speed BIST Enable.
+ * @bist_done: PHY Bist Done.
+ * Asserted at the end of the PHY BIST sequence.
+ * @bist_err: PHY Bist Error.
+ * Indicates an internal error was detected during
+ * the BIST sequence.
+ * @tdata_out: PHY Test Data Out.
+ * Presents either internaly generated signals or
+ * test register contents, based upon the value of
+ * test_data_out_sel.
+ * @siddq: Drives the USBP (USB-PHY) SIDDQ input.
+ * Normally should be set to zero.
+ * When customers have no intent to use USB PHY
+ * interface, they should:
+ * - still provide 3.3V to USB_VDD33, and
+ * - tie USB_REXT to 3.3V supply, and
+ * - set USBN*_USBP_CTL_STATUS[SIDDQ]=1
+ * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable
+ * @dma_bmode: When set to 1 the L2C DMA address will be updated
+ * with byte-counts between packets. When set to 0
+ * the L2C DMA address is incremented to the next
+ * 4-byte aligned address after adding byte-count.
+ * @usbc_end: Bigendian input to the USB Core. This should be
+ * set to '0' for operation.
+ * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP.
+ * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP.
+ * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY.
+ * This signal enables the pull-down resistance on
+ * the D+ line. '1' pull down-resistance is connected
+ * to D+/ '0' pull down resistance is not connected
+ * to D+. When an A/B device is acting as a host
+ * (downstream-facing port), dp_pulldown and
+ * dm_pulldown are enabled. This must not toggle
+ * during normal opeartion.
+ * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY.
+ * This signal enables the pull-down resistance on
+ * the D- line. '1' pull down-resistance is connected
+ * to D-. '0' pull down resistance is not connected
+ * to D-. When an A/B device is acting as a host
+ * (downstream-facing port), dp_pulldown and
+ * dm_pulldown are enabled. This must not toggle
+ * during normal opeartion.
+ * @hst_mode: When '0' the USB is acting as HOST, when '1'
+ * USB is acting as device. This field needs to be
+ * set while the USB is in reset.
+ * @tx_bs_enh: Transmit Bit Stuffing on [15:8].
+ * Enables or disables bit stuffing on data[15:8]
+ * when bit-stuffing is enabled.
+ * @tx_bs_en: Transmit Bit Stuffing on [7:0].
+ * Enables or disables bit stuffing on data[7:0]
+ * when bit-stuffing is enabled.
+ * @loop_enb: PHY Loopback Test Enable.
+ * '1': During data transmission the receive is
+ * enabled.
+ * '0': During data transmission the receive is
+ * disabled.
+ * Must be '0' for normal operation.
+ * @vtest_enb: Analog Test Pin Enable.
+ * '1' The PHY's analog_test pin is enabled for the
+ * input and output of applicable analog test signals.
+ * '0' THe analog_test pin is disabled.
+ * @bist_enb: Built-In Self Test Enable.
+ * Used to activate BIST in the PHY.
+ * @tdata_sel: Test Data Out Select.
+ * '1' test_data_out[3:0] (PHY) register contents
+ * are output. '0' internaly generated signals are
+ * output.
+ * @taddr_in: Mode Address for Test Interface.
+ * Specifies the register address for writing to or
+ * reading from the PHY test interface register.
+ * @tdata_in: Internal Testing Register Input Data and Select
+ * This is a test bus. Data is present on [3:0],
+ * and its corresponding select (enable) is present
+ * on bits [7:4].
+ * @ate_reset: Reset input from automatic test equipment.
+ * This is a test signal. When the USB Core is
+ * powered up (not in Susned Mode), an automatic
+ * tester can use this to disable phy_clock and
+ * free_clk, then re-eanable them with an aligned
+ * phase.
+ * '1': The phy_clk and free_clk outputs are
+ * disabled. "0": The phy_clock and free_clk outputs
+ * are available within a specific period after the
+ * de-assertion.
+ */
+ struct cvmx_usbnx_usbp_ctl_status_cn52xx {
+ uint64_t txrisetune : 1;
+ uint64_t txvreftune : 4;
+ uint64_t txfslstune : 4;
+ uint64_t txhsxvtune : 2;
+ uint64_t sqrxtune : 3;
+ uint64_t compdistune : 3;
+ uint64_t otgtune : 3;
+ uint64_t otgdisable : 1;
+ uint64_t portreset : 1;
+ uint64_t drvvbus : 1;
+ uint64_t lsbist : 1;
+ uint64_t fsbist : 1;
+ uint64_t hsbist : 1;
+ uint64_t bist_done : 1;
+ uint64_t bist_err : 1;
+ uint64_t tdata_out : 4;
+ uint64_t siddq : 1;
+ uint64_t txpreemphasistune : 1;
+ uint64_t dma_bmode : 1;
+ uint64_t usbc_end : 1;
+ uint64_t usbp_bist : 1;
+ uint64_t tclk : 1;
+ uint64_t dp_pulld : 1;
+ uint64_t dm_pulld : 1;
+ uint64_t hst_mode : 1;
+ uint64_t reserved_19_22 : 4;
+ uint64_t tx_bs_enh : 1;
+ uint64_t tx_bs_en : 1;
+ uint64_t loop_enb : 1;
+ uint64_t vtest_enb : 1;
+ uint64_t bist_enb : 1;
+ uint64_t tdata_sel : 1;
+ uint64_t taddr_in : 4;
+ uint64_t tdata_in : 8;
+ uint64_t ate_reset : 1;
+ } cn52xx;
+};
+typedef union cvmx_usbnx_usbp_ctl_status cvmx_usbnx_usbp_ctl_status_t;
+
+#endif
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Cavium Networks
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+
+#include <linux/time.h>
+#include <linux/delay.h>
+
+#include <asm/octeon/cvmx.h>
+#include "cvmx-usb.h"
+#include <asm/octeon/cvmx-iob-defs.h>
+
+#include <linux/usb/hcd.h>
+
+#include <linux/err.h>
+
+struct octeon_hcd {
+ spinlock_t lock;
+ cvmx_usb_state_t usb;
+ struct tasklet_struct dequeue_tasklet;
+ struct list_head dequeue_list;
+};
+
+/* convert between an HCD pointer and the corresponding struct octeon_hcd */
+static inline struct octeon_hcd *hcd_to_octeon(struct usb_hcd *hcd)
+{
+ return (struct octeon_hcd *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *octeon_to_hcd(struct octeon_hcd *p)
+{
+ return container_of((void *)p, struct usb_hcd, hcd_priv);
+}
+
+static inline struct octeon_hcd *cvmx_usb_to_octeon(cvmx_usb_state_t *p)
+{
+ return container_of(p, struct octeon_hcd, usb);
+}
+
+static irqreturn_t octeon_usb_irq(struct usb_hcd *hcd)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_poll(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static void octeon_usb_port_callback(cvmx_usb_state_t *usb,
+ cvmx_usb_callback_t reason,
+ cvmx_usb_complete_t status,
+ int pipe_handle,
+ int submit_handle,
+ int bytes_transferred,
+ void *user_data)
+{
+ struct octeon_hcd *priv = cvmx_usb_to_octeon(usb);
+
+ spin_unlock(&priv->lock);
+ usb_hcd_poll_rh_status(octeon_to_hcd(priv));
+ spin_lock(&priv->lock);
+}
+
+static int octeon_usb_start(struct usb_hcd *hcd)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ unsigned long flags;
+
+ hcd->state = HC_STATE_RUNNING;
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_register_callback(&priv->usb, CVMX_USB_CALLBACK_PORT_CHANGED,
+ octeon_usb_port_callback, NULL);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return 0;
+}
+
+static void octeon_usb_stop(struct usb_hcd *hcd)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_register_callback(&priv->usb, CVMX_USB_CALLBACK_PORT_CHANGED,
+ NULL, NULL);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ hcd->state = HC_STATE_HALT;
+}
+
+static int octeon_usb_get_frame_number(struct usb_hcd *hcd)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+
+ return cvmx_usb_get_frame_number(&priv->usb);
+}
+
+static void octeon_usb_urb_complete_callback(cvmx_usb_state_t *usb,
+ cvmx_usb_callback_t reason,
+ cvmx_usb_complete_t status,
+ int pipe_handle,
+ int submit_handle,
+ int bytes_transferred,
+ void *user_data)
+{
+ struct octeon_hcd *priv = cvmx_usb_to_octeon(usb);
+ struct usb_hcd *hcd = octeon_to_hcd(priv);
+ struct device *dev = hcd->self.controller;
+ struct urb *urb = user_data;
+
+ urb->actual_length = bytes_transferred;
+ urb->hcpriv = NULL;
+
+ if (!list_empty(&urb->urb_list)) {
+ /*
+ * It is on the dequeue_list, but we are going to call
+ * usb_hcd_giveback_urb(), so we must clear it from
+ * the list. We got to it before the
+ * octeon_usb_urb_dequeue_work() tasklet did.
+ */
+ list_del(&urb->urb_list);
+ /* No longer on the dequeue_list. */
+ INIT_LIST_HEAD(&urb->urb_list);
+ }
+
+ /* For Isochronous transactions we need to update the URB packet status
+ list from data in our private copy */
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ int i;
+ /*
+ * The pointer to the private list is stored in the setup_packet
+ * field.
+ */
+ cvmx_usb_iso_packet_t *iso_packet = (cvmx_usb_iso_packet_t *) urb->setup_packet;
+ /* Recalculate the transfer size by adding up each packet */
+ urb->actual_length = 0;
+ for (i = 0; i < urb->number_of_packets; i++) {
+ if (iso_packet[i].status == CVMX_USB_COMPLETE_SUCCESS) {
+ urb->iso_frame_desc[i].status = 0;
+ urb->iso_frame_desc[i].actual_length = iso_packet[i].length;
+ urb->actual_length += urb->iso_frame_desc[i].actual_length;
+ } else {
+ dev_dbg(dev, "ISOCHRONOUS packet=%d of %d status=%d pipe=%d submit=%d size=%d\n",
+ i, urb->number_of_packets,
+ iso_packet[i].status, pipe_handle,
+ submit_handle, iso_packet[i].length);
+ urb->iso_frame_desc[i].status = -EREMOTEIO;
+ }
+ }
+ /* Free the private list now that we don't need it anymore */
+ kfree(iso_packet);
+ urb->setup_packet = NULL;
+ }
+
+ switch (status) {
+ case CVMX_USB_COMPLETE_SUCCESS:
+ urb->status = 0;
+ break;
+ case CVMX_USB_COMPLETE_CANCEL:
+ if (urb->status == 0)
+ urb->status = -ENOENT;
+ break;
+ case CVMX_USB_COMPLETE_STALL:
+ dev_dbg(dev, "status=stall pipe=%d submit=%d size=%d\n",
+ pipe_handle, submit_handle, bytes_transferred);
+ urb->status = -EPIPE;
+ break;
+ case CVMX_USB_COMPLETE_BABBLEERR:
+ dev_dbg(dev, "status=babble pipe=%d submit=%d size=%d\n",
+ pipe_handle, submit_handle, bytes_transferred);
+ urb->status = -EPIPE;
+ break;
+ case CVMX_USB_COMPLETE_SHORT:
+ dev_dbg(dev, "status=short pipe=%d submit=%d size=%d\n",
+ pipe_handle, submit_handle, bytes_transferred);
+ urb->status = -EREMOTEIO;
+ break;
+ case CVMX_USB_COMPLETE_ERROR:
+ case CVMX_USB_COMPLETE_XACTERR:
+ case CVMX_USB_COMPLETE_DATATGLERR:
+ case CVMX_USB_COMPLETE_FRAMEERR:
+ dev_dbg(dev, "status=%d pipe=%d submit=%d size=%d\n",
+ status, pipe_handle, submit_handle, bytes_transferred);
+ urb->status = -EPROTO;
+ break;
+ }
+ spin_unlock(&priv->lock);
+ usb_hcd_giveback_urb(octeon_to_hcd(priv), urb, urb->status);
+ spin_lock(&priv->lock);
+}
+
+static int octeon_usb_urb_enqueue(struct usb_hcd *hcd,
+ struct urb *urb,
+ gfp_t mem_flags)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ struct device *dev = hcd->self.controller;
+ int submit_handle = -1;
+ int pipe_handle;
+ unsigned long flags;
+ cvmx_usb_iso_packet_t *iso_packet;
+ struct usb_host_endpoint *ep = urb->ep;
+
+ urb->status = 0;
+ INIT_LIST_HEAD(&urb->urb_list); /* not enqueued on dequeue_list */
+ spin_lock_irqsave(&priv->lock, flags);
+
+ if (!ep->hcpriv) {
+ cvmx_usb_transfer_t transfer_type;
+ cvmx_usb_speed_t speed;
+ int split_device = 0;
+ int split_port = 0;
+ switch (usb_pipetype(urb->pipe)) {
+ case PIPE_ISOCHRONOUS:
+ transfer_type = CVMX_USB_TRANSFER_ISOCHRONOUS;
+ break;
+ case PIPE_INTERRUPT:
+ transfer_type = CVMX_USB_TRANSFER_INTERRUPT;
+ break;
+ case PIPE_CONTROL:
+ transfer_type = CVMX_USB_TRANSFER_CONTROL;
+ break;
+ default:
+ transfer_type = CVMX_USB_TRANSFER_BULK;
+ break;
+ }
+ switch (urb->dev->speed) {
+ case USB_SPEED_LOW:
+ speed = CVMX_USB_SPEED_LOW;
+ break;
+ case USB_SPEED_FULL:
+ speed = CVMX_USB_SPEED_FULL;
+ break;
+ default:
+ speed = CVMX_USB_SPEED_HIGH;
+ break;
+ }
+ /*
+ * For slow devices on high speed ports we need to find the hub
+ * that does the speed translation so we know where to send the
+ * split transactions.
+ */
+ if (speed != CVMX_USB_SPEED_HIGH) {
+ /*
+ * Start at this device and work our way up the usb
+ * tree.
+ */
+ struct usb_device *dev = urb->dev;
+ while (dev->parent) {
+ /*
+ * If our parent is high speed then he'll
+ * receive the splits.
+ */
+ if (dev->parent->speed == USB_SPEED_HIGH) {
+ split_device = dev->parent->devnum;
+ split_port = dev->portnum;
+ break;
+ }
+ /*
+ * Move up the tree one level. If we make it all
+ * the way up the tree, then the port must not
+ * be in high speed mode and we don't need a
+ * split.
+ */
+ dev = dev->parent;
+ }
+ }
+ pipe_handle = cvmx_usb_open_pipe(&priv->usb,
+ 0,
+ usb_pipedevice(urb->pipe),
+ usb_pipeendpoint(urb->pipe),
+ speed,
+ le16_to_cpu(ep->desc.wMaxPacketSize) & 0x7ff,
+ transfer_type,
+ usb_pipein(urb->pipe) ? CVMX_USB_DIRECTION_IN : CVMX_USB_DIRECTION_OUT,
+ urb->interval,
+ (le16_to_cpu(ep->desc.wMaxPacketSize) >> 11) & 0x3,
+ split_device,
+ split_port);
+ if (pipe_handle < 0) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ dev_dbg(dev, "Failed to create pipe\n");
+ return -ENOMEM;
+ }
+ ep->hcpriv = (void *)(0x10000L + pipe_handle);
+ } else {
+ pipe_handle = 0xffff & (long)ep->hcpriv;
+ }
+
+ switch (usb_pipetype(urb->pipe)) {
+ case PIPE_ISOCHRONOUS:
+ dev_dbg(dev, "Submit isochronous to %d.%d\n",
+ usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
+ /*
+ * Allocate a structure to use for our private list of
+ * isochronous packets.
+ */
+ iso_packet = kmalloc(urb->number_of_packets * sizeof(cvmx_usb_iso_packet_t), GFP_ATOMIC);
+ if (iso_packet) {
+ int i;
+ /* Fill the list with the data from the URB */
+ for (i = 0; i < urb->number_of_packets; i++) {
+ iso_packet[i].offset = urb->iso_frame_desc[i].offset;
+ iso_packet[i].length = urb->iso_frame_desc[i].length;
+ iso_packet[i].status = CVMX_USB_COMPLETE_ERROR;
+ }
+ /*
+ * Store a pointer to the list in the URB setup_packet
+ * field. We know this currently isn't being used and
+ * this saves us a bunch of logic.
+ */
+ urb->setup_packet = (char *)iso_packet;
+ submit_handle = cvmx_usb_submit_isochronous(&priv->usb, pipe_handle,
+ urb->start_frame,
+ 0 /* flags */ ,
+ urb->number_of_packets,
+ iso_packet,
+ urb->transfer_dma,
+ urb->transfer_buffer_length,
+ octeon_usb_urb_complete_callback,
+ urb);
+ /*
+ * If submit failed we need to free our private packet
+ * list.
+ */
+ if (submit_handle < 0) {
+ urb->setup_packet = NULL;
+ kfree(iso_packet);
+ }
+ }
+ break;
+ case PIPE_INTERRUPT:
+ dev_dbg(dev, "Submit interrupt to %d.%d\n",
+ usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
+ submit_handle = cvmx_usb_submit_interrupt(&priv->usb, pipe_handle,
+ urb->transfer_dma,
+ urb->transfer_buffer_length,
+ octeon_usb_urb_complete_callback,
+ urb);
+ break;
+ case PIPE_CONTROL:
+ dev_dbg(dev, "Submit control to %d.%d\n",
+ usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
+ submit_handle = cvmx_usb_submit_control(&priv->usb, pipe_handle,
+ urb->setup_dma,
+ urb->transfer_dma,
+ urb->transfer_buffer_length,
+ octeon_usb_urb_complete_callback,
+ urb);
+ break;
+ case PIPE_BULK:
+ dev_dbg(dev, "Submit bulk to %d.%d\n",
+ usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe));
+ submit_handle = cvmx_usb_submit_bulk(&priv->usb, pipe_handle,
+ urb->transfer_dma,
+ urb->transfer_buffer_length,
+ octeon_usb_urb_complete_callback,
+ urb);
+ break;
+ }
+ if (submit_handle < 0) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ dev_dbg(dev, "Failed to submit\n");
+ return -ENOMEM;
+ }
+ urb->hcpriv = (void *)(long)(((submit_handle & 0xffff) << 16) | pipe_handle);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return 0;
+}
+
+static void octeon_usb_urb_dequeue_work(unsigned long arg)
+{
+ unsigned long flags;
+ struct octeon_hcd *priv = (struct octeon_hcd *)arg;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ while (!list_empty(&priv->dequeue_list)) {
+ int pipe_handle;
+ int submit_handle;
+ struct urb *urb = container_of(priv->dequeue_list.next, struct urb, urb_list);
+ list_del(&urb->urb_list);
+ /* not enqueued on dequeue_list */
+ INIT_LIST_HEAD(&urb->urb_list);
+ pipe_handle = 0xffff & (long)urb->hcpriv;
+ submit_handle = ((long)urb->hcpriv) >> 16;
+ cvmx_usb_cancel(&priv->usb, pipe_handle, submit_handle);
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int octeon_usb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ unsigned long flags;
+
+ if (!urb->dev)
+ return -EINVAL;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ urb->status = status;
+ list_add_tail(&urb->urb_list, &priv->dequeue_list);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ tasklet_schedule(&priv->dequeue_tasklet);
+
+ return 0;
+}
+
+static void octeon_usb_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+ struct device *dev = hcd->self.controller;
+
+ if (ep->hcpriv) {
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ int pipe_handle = 0xffff & (long)ep->hcpriv;
+ unsigned long flags;
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_cancel_all(&priv->usb, pipe_handle);
+ if (cvmx_usb_close_pipe(&priv->usb, pipe_handle))
+ dev_dbg(dev, "Closing pipe %d failed\n", pipe_handle);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ep->hcpriv = NULL;
+ }
+}
+
+static int octeon_usb_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ cvmx_usb_port_status_t port_status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ port_status = cvmx_usb_get_status(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ buf[0] = 0;
+ buf[0] = port_status.connect_change << 1;
+
+ return (buf[0] != 0);
+}
+
+static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength)
+{
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ struct device *dev = hcd->self.controller;
+ cvmx_usb_port_status_t usb_port_status;
+ int port_status;
+ struct usb_hub_descriptor *desc;
+ unsigned long flags;
+
+ switch (typeReq) {
+ case ClearHubFeature:
+ dev_dbg(dev, "ClearHubFeature\n");
+ switch (wValue) {
+ case C_HUB_LOCAL_POWER:
+ case C_HUB_OVER_CURRENT:
+ /* Nothing required here */
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case ClearPortFeature:
+ dev_dbg(dev, "ClearPortFeature\n");
+ if (wIndex != 1) {
+ dev_dbg(dev, " INVALID\n");
+ return -EINVAL;
+ }
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ dev_dbg(dev, " ENABLE\n");
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_disable(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ dev_dbg(dev, " SUSPEND\n");
+ /* Not supported on Octeon */
+ break;
+ case USB_PORT_FEAT_POWER:
+ dev_dbg(dev, " POWER\n");
+ /* Not supported on Octeon */
+ break;
+ case USB_PORT_FEAT_INDICATOR:
+ dev_dbg(dev, " INDICATOR\n");
+ /* Port inidicator not supported */
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ dev_dbg(dev, " C_CONNECTION\n");
+ /* Clears drivers internal connect status change flag */
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ dev_dbg(dev, " C_RESET\n");
+ /*
+ * Clears the driver's internal Port Reset Change flag.
+ */
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ dev_dbg(dev, " C_ENABLE\n");
+ /*
+ * Clears the driver's internal Port Enable/Disable
+ * Change flag.
+ */
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ dev_dbg(dev, " C_SUSPEND\n");
+ /*
+ * Clears the driver's internal Port Suspend Change
+ * flag, which is set when resume signaling on the host
+ * port is complete.
+ */
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ dev_dbg(dev, " C_OVER_CURRENT\n");
+ /* Clears the driver's overcurrent Change flag */
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_set_status(&priv->usb, cvmx_usb_get_status(&priv->usb));
+ spin_unlock_irqrestore(&priv->lock, flags);
+ break;
+ default:
+ dev_dbg(dev, " UNKNOWN\n");
+ return -EINVAL;
+ }
+ break;
+ case GetHubDescriptor:
+ dev_dbg(dev, "GetHubDescriptor\n");
+ desc = (struct usb_hub_descriptor *)buf;
+ desc->bDescLength = 9;
+ desc->bDescriptorType = 0x29;
+ desc->bNbrPorts = 1;
+ desc->wHubCharacteristics = 0x08;
+ desc->bPwrOn2PwrGood = 1;
+ desc->bHubContrCurrent = 0;
+ desc->u.hs.DeviceRemovable[0] = 0;
+ desc->u.hs.DeviceRemovable[1] = 0xff;
+ break;
+ case GetHubStatus:
+ dev_dbg(dev, "GetHubStatus\n");
+ *(__le32 *) buf = 0;
+ break;
+ case GetPortStatus:
+ dev_dbg(dev, "GetPortStatus\n");
+ if (wIndex != 1) {
+ dev_dbg(dev, " INVALID\n");
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+ usb_port_status = cvmx_usb_get_status(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ port_status = 0;
+
+ if (usb_port_status.connect_change) {
+ port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
+ dev_dbg(dev, " C_CONNECTION\n");
+ }
+
+ if (usb_port_status.port_enabled) {
+ port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
+ dev_dbg(dev, " C_ENABLE\n");
+ }
+
+ if (usb_port_status.connected) {
+ port_status |= (1 << USB_PORT_FEAT_CONNECTION);
+ dev_dbg(dev, " CONNECTION\n");
+ }
+
+ if (usb_port_status.port_enabled) {
+ port_status |= (1 << USB_PORT_FEAT_ENABLE);
+ dev_dbg(dev, " ENABLE\n");
+ }
+
+ if (usb_port_status.port_over_current) {
+ port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
+ dev_dbg(dev, " OVER_CURRENT\n");
+ }
+
+ if (usb_port_status.port_powered) {
+ port_status |= (1 << USB_PORT_FEAT_POWER);
+ dev_dbg(dev, " POWER\n");
+ }
+
+ if (usb_port_status.port_speed == CVMX_USB_SPEED_HIGH) {
+ port_status |= USB_PORT_STAT_HIGH_SPEED;
+ dev_dbg(dev, " HIGHSPEED\n");
+ } else if (usb_port_status.port_speed == CVMX_USB_SPEED_LOW) {
+ port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
+ dev_dbg(dev, " LOWSPEED\n");
+ }
+
+ *((__le32 *) buf) = cpu_to_le32(port_status);
+ break;
+ case SetHubFeature:
+ dev_dbg(dev, "SetHubFeature\n");
+ /* No HUB features supported */
+ break;
+ case SetPortFeature:
+ dev_dbg(dev, "SetPortFeature\n");
+ if (wIndex != 1) {
+ dev_dbg(dev, " INVALID\n");
+ return -EINVAL;
+ }
+
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ dev_dbg(dev, " SUSPEND\n");
+ return -EINVAL;
+ case USB_PORT_FEAT_POWER:
+ dev_dbg(dev, " POWER\n");
+ return -EINVAL;
+ case USB_PORT_FEAT_RESET:
+ dev_dbg(dev, " RESET\n");
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_disable(&priv->usb);
+ if (cvmx_usb_enable(&priv->usb))
+ dev_dbg(dev, "Failed to enable the port\n");
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return 0;
+ case USB_PORT_FEAT_INDICATOR:
+ dev_dbg(dev, " INDICATOR\n");
+ /* Not supported */
+ break;
+ default:
+ dev_dbg(dev, " UNKNOWN\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ dev_dbg(dev, "Unknown root hub request\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+
+static const struct hc_driver octeon_hc_driver = {
+ .description = "Octeon USB",
+ .product_desc = "Octeon Host Controller",
+ .hcd_priv_size = sizeof(struct octeon_hcd),
+ .irq = octeon_usb_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+ .start = octeon_usb_start,
+ .stop = octeon_usb_stop,
+ .urb_enqueue = octeon_usb_urb_enqueue,
+ .urb_dequeue = octeon_usb_urb_dequeue,
+ .endpoint_disable = octeon_usb_endpoint_disable,
+ .get_frame_number = octeon_usb_get_frame_number,
+ .hub_status_data = octeon_usb_hub_status_data,
+ .hub_control = octeon_usb_hub_control,
+};
+
+
+static int octeon_usb_driver_probe(struct device *dev)
+{
+ int status;
+ int usb_num = to_platform_device(dev)->id;
+ int irq = platform_get_irq(to_platform_device(dev), 0);
+ struct octeon_hcd *priv;
+ struct usb_hcd *hcd;
+ unsigned long flags;
+
+ /*
+ * Set the DMA mask to 64bits so we get buffers already translated for
+ * DMA.
+ */
+ dev->coherent_dma_mask = ~0;
+ dev->dma_mask = &dev->coherent_dma_mask;
+
+ hcd = usb_create_hcd(&octeon_hc_driver, dev, dev_name(dev));
+ if (!hcd) {
+ dev_dbg(dev, "Failed to allocate memory for HCD\n");
+ return -1;
+ }
+ hcd->uses_new_polling = 1;
+ priv = (struct octeon_hcd *)hcd->hcd_priv;
+
+ spin_lock_init(&priv->lock);
+
+ tasklet_init(&priv->dequeue_tasklet, octeon_usb_urb_dequeue_work, (unsigned long)priv);
+ INIT_LIST_HEAD(&priv->dequeue_list);
+
+ status = cvmx_usb_initialize(&priv->usb, usb_num, CVMX_USB_INITIALIZE_FLAGS_CLOCK_AUTO);
+ if (status) {
+ dev_dbg(dev, "USB initialization failed with %d\n", status);
+ kfree(hcd);
+ return -1;
+ }
+
+ /* This delay is needed for CN3010, but I don't know why... */
+ mdelay(10);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ cvmx_usb_poll(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ status = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (status) {
+ dev_dbg(dev, "USB add HCD failed with %d\n", status);
+ kfree(hcd);
+ return -1;
+ }
+
+ dev_dbg(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
+
+ return 0;
+}
+
+static int octeon_usb_driver_remove(struct device *dev)
+{
+ int status;
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+ unsigned long flags;
+
+ usb_remove_hcd(hcd);
+ tasklet_kill(&priv->dequeue_tasklet);
+ spin_lock_irqsave(&priv->lock, flags);
+ status = cvmx_usb_shutdown(&priv->usb);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ if (status)
+ dev_dbg(dev, "USB shutdown failed with %d\n", status);
+
+ kfree(hcd);
+
+ return 0;
+}
+
+static struct device_driver octeon_usb_driver = {
+ .name = "OcteonUSB",
+ .bus = &platform_bus_type,
+ .probe = octeon_usb_driver_probe,
+ .remove = octeon_usb_driver_remove,
+};
+
+
+#define MAX_USB_PORTS 10
+static struct platform_device *pdev_glob[MAX_USB_PORTS];
+static int octeon_usb_registered;
+static int __init octeon_usb_module_init(void)
+{
+ int num_devices = cvmx_usb_get_num_ports();
+ int device;
+
+ if (usb_disabled() || num_devices == 0)
+ return -ENODEV;
+
+ if (driver_register(&octeon_usb_driver))
+ return -ENOMEM;
+
+ octeon_usb_registered = 1;
+
+ /*
+ * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
+ * IOB priority registers. Under heavy network load USB
+ * hardware can be starved by the IOB causing a crash. Give
+ * it a priority boost if it has been waiting more than 400
+ * cycles to avoid this situation.
+ *
+ * Testing indicates that a cnt_val of 8192 is not sufficient,
+ * but no failures are seen with 4096. We choose a value of
+ * 400 to give a safety factor of 10.
+ */
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
+ union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
+
+ pri_cnt.u64 = 0;
+ pri_cnt.s.cnt_enb = 1;
+ pri_cnt.s.cnt_val = 400;
+ cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
+ }
+
+ for (device = 0; device < num_devices; device++) {
+ struct resource irq_resource;
+ struct platform_device *pdev;
+ memset(&irq_resource, 0, sizeof(irq_resource));
+ irq_resource.start = (device == 0) ? OCTEON_IRQ_USB0 : OCTEON_IRQ_USB1;
+ irq_resource.end = irq_resource.start;
+ irq_resource.flags = IORESOURCE_IRQ;
+ pdev = platform_device_register_simple((char *)octeon_usb_driver. name, device, &irq_resource, 1);
+ if (IS_ERR(pdev)) {
+ driver_unregister(&octeon_usb_driver);
+ octeon_usb_registered = 0;
+ return PTR_ERR(pdev);
+ }
+ if (device < MAX_USB_PORTS)
+ pdev_glob[device] = pdev;
+
+ }
+ return 0;
+}
+
+static void __exit octeon_usb_module_cleanup(void)
+{
+ int i;
+
+ for (i = 0; i < MAX_USB_PORTS; i++)
+ if (pdev_glob[i]) {
+ platform_device_unregister(pdev_glob[i]);
+ pdev_glob[i] = NULL;
+ }
+ if (octeon_usb_registered)
+ driver_unregister(&octeon_usb_driver);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium Networks <support@caviumnetworks.com>");
+MODULE_DESCRIPTION("Cavium Networks Octeon USB Host driver.");
+module_init(octeon_usb_module_init);
+module_exit(octeon_usb_module_cleanup);
--- /dev/null
+#
+# Copyright (C) 2009-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Image/BuildKernel
+ # Workaround pre-SDK-1.9.0 u-boot versions not handling the .notes section
+ $(TARGET_CROSS)strip -R .notes $(KDIR)/vmlinux.elf -o $(BIN_DIR)/$(IMG_PREFIX)-vmlinux.elf
+ $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
+ dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux.lzma bs=65536 conv=sync
+endef
+
+define Image/Build/squashfs
+ $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+endef
+
+define Image/Build
+ $(call Image/Build/$(1))
+ dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
+endef
+
+$(eval $(call BuildImage))
--- /dev/null
+From ab2bb148c5932712d2717a7f3a452846f07a660a Mon Sep 17 00:00:00 2001
+From: Faidon Liambotis <paravoid@debian.org>
+Date: Thu, 11 Jul 2013 21:08:09 +0000
+Subject: [PATCH] MIPS: Octeon: Fix DT pruning bug with pip ports
+
+During the pruning of the device tree octeon_fdt_pip_iface() is called
+for each PIP interface and every port up to the port count is removed
+from the device tree. However, the count was set to the return value of
+cvmx_helper_interface_enumerate() which doesn't actually return the
+count but just returns zero on success. This effectively removed *all*
+ports from the tree.
+
+Use cvmx_helper_ports_on_interface() instead to fix this. This
+successfully restores the 3 ports of my ERLite-3 and fixes the "kernel
+assigns random MAC addresses" issue.
+
+Signed-off-by: Faidon Liambotis <paravoid@debian.org>
+Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
+Acked-by: David Daney <david.daney@cavium.com>
+Cc: linux-mips@linux-mips.org
+Patchwork: https://patchwork.linux-mips.org/patch/5587/
+Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
+---
+ arch/mips/cavium-octeon/octeon-platform.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
+index 7b746e7..1830874 100644
+--- a/arch/mips/cavium-octeon/octeon-platform.c
++++ b/arch/mips/cavium-octeon/octeon-platform.c
+@@ -334,9 +334,10 @@ static void __init octeon_fdt_pip_iface(int pip, int idx, u64 *pmac)
+ char name_buffer[20];
+ int iface;
+ int p;
+- int count;
++ int count = 0;
+
+- count = cvmx_helper_interface_enumerate(idx);
++ if (cvmx_helper_interface_enumerate(idx) == 0)
++ count = cvmx_helper_ports_on_interface(idx);
+
+ snprintf(name_buffer, sizeof(name_buffer), "interface@%d", idx);
+ iface = fdt_subnode_offset(initial_boot_params, pip, name_buffer);
+--
+1.7.10.4
+
--- /dev/null
+From a135a9b5d9683ace787c7d86f1e642d9acfacdde Mon Sep 17 00:00:00 2001
+From: Aaro Koskinen <aaro.koskinen@iki.fi>
+Date: Sun, 23 Jun 2013 20:38:44 +0000
+Subject: [PATCH] MIPS: Octeon: Enable interfaces on EdgeRouter Lite
+
+Enable interfaces on EdgeRouter Lite. Tested with cavium_octeon_defconfig
+and busybox shell. DHCP & ping works with eth0, eth1 and eth2.
+
+The board type "UBNT_E100" is taken from the sources of the vendor kernel
+shipped with the product.
+
+Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
+Acked-by: David Daney <david.daney@cavium.com>
+Cc: linux-mips@linux-mips.org
+Patchwork: https://patchwork.linux-mips.org/patch/5546/
+Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
+---
+ arch/mips/cavium-octeon/executive/cvmx-helper-board.c | 13 +++++++++++++
+ arch/mips/include/asm/octeon/cvmx-bootinfo.h | 2 ++
+ 2 files changed, 15 insertions(+)
+
+diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+index 7c64977..0a1283c 100644
+--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
++++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+@@ -181,6 +181,11 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
+ return ipd_port - 16 + 4;
+ else
+ return -1;
++ case CVMX_BOARD_TYPE_UBNT_E100:
++ if (ipd_port >= 0 && ipd_port <= 2)
++ return 7 - ipd_port;
++ else
++ return -1;
+ }
+
+ /* Some unknown board. Somebody forgot to update this function... */
+@@ -706,6 +711,14 @@ int __cvmx_helper_board_hardware_enable(int interface)
+ }
+ }
+ }
++ } else if (cvmx_sysinfo_get()->board_type ==
++ CVMX_BOARD_TYPE_UBNT_E100) {
++ cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0);
++ cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10);
++ cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
++ cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0x10);
++ cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(2, interface), 0);
++ cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(2, interface), 0x10);
+ }
+ return 0;
+ }
+diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
+index 284fa8d..7b7818d 100644
+--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
++++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
+@@ -227,6 +227,7 @@ enum cvmx_board_types_enum {
+ * use any numbers in this range.
+ */
+ CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
++ CVMX_BOARD_TYPE_UBNT_E100 = 20002,
+ CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
+
+ /* The remaining range is reserved for future use. */
+@@ -325,6 +326,7 @@ static inline const char *cvmx_board_type_to_string(enum
+
+ /* Customer private range */
+ ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
++ ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
+ ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
+ }
+ return "Unsupported Board";
+--
+1.7.10.4
+
--- /dev/null
+From b164935b38d64557a32892e7aa45e213e9d11ea8 Mon Sep 17 00:00:00 2001
+From: Aaro Koskinen <aaro.koskinen@iki.fi>
+Date: Sat, 1 Jun 2013 21:42:58 +0300
+Subject: [PATCH] staging: MIPS: add Octeon USB HCD support
+
+Add support for Octeon USB HCD. Tested on EdgeRouter Lite with USB
+mass storage.
+
+The driver has been extracted from GPL sources of EdgeRouter Lite firmware
+(based on Linux 2.6.32.13). Some minor fixes and cleanups have been done
+to make it work with 3.10-rc3.
+
+$ uname -a
+Linux (none) 3.10.0-rc3-edge-00005-g86cb5bc #41 SMP PREEMPT Sat Jun 1 20:41:46 EEST 2013 mips64 GNU/Linux
+$ modprobe octeon-usb
+[ 37.971683] octeon_usb: module is from the staging directory, the quality is unknown, you have been warned.
+[ 37.983649] OcteonUSB: Detected 1 ports
+[ 37.999360] OcteonUSB OcteonUSB.0: Octeon Host Controller
+[ 38.004847] OcteonUSB OcteonUSB.0: new USB bus registered, assigned bus number 1
+[ 38.012332] OcteonUSB OcteonUSB.0: irq 122, io mem 0x00000000
+[ 38.019970] hub 1-0:1.0: USB hub found
+[ 38.023851] hub 1-0:1.0: 1 port detected
+[ 38.028101] OcteonUSB: Registered HCD for port 0 on irq 122
+[ 38.391443] usb 1-1: new high-speed USB device number 2 using OcteonUSB
+[ 38.586922] usb-storage 1-1:1.0: USB Mass Storage device detected
+[ 38.597375] scsi0 : usb-storage 1-1:1.0
+[ 39.604111] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
+[ 39.619113] sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB)
+[ 39.630696] sd 0:0:0:0: [sda] Write Protect is off
+[ 39.635945] sd 0:0:0:0: [sda] No Caching mode page present
+[ 39.641464] sd 0:0:0:0: [sda] Assuming drive cache: write through
+[ 39.651341] sd 0:0:0:0: [sda] No Caching mode page present
+[ 39.656917] sd 0:0:0:0: [sda] Assuming drive cache: write through
+[ 39.664296] sda: sda1 sda2
+[ 39.675574] sd 0:0:0:0: [sda] No Caching mode page present
+[ 39.681093] sd 0:0:0:0: [sda] Assuming drive cache: write through
+[ 39.687223] sd 0:0:0:0: [sda] Attached SCSI removable disk
+
+Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
+Cc: David Daney <ddaney.cavm@gmail.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+---
+ drivers/staging/Kconfig | 2 +
+ drivers/staging/Makefile | 1 +
+ drivers/staging/octeon-usb/Kconfig | 10 +
+ drivers/staging/octeon-usb/Makefile | 3 +
+ drivers/staging/octeon-usb/TODO | 11 +
+ drivers/staging/octeon-usb/cvmx-usb.c | 3344 ++++++++++++++++++++++++++
+ drivers/staging/octeon-usb/cvmx-usb.h | 1085 +++++++++
+ drivers/staging/octeon-usb/cvmx-usbcx-defs.h | 3086 ++++++++++++++++++++++++
+ drivers/staging/octeon-usb/cvmx-usbnx-defs.h | 1596 ++++++++++++
+ drivers/staging/octeon-usb/octeon-hcd.c | 854 +++++++
+ 10 files changed, 9992 insertions(+)
+ create mode 100644 drivers/staging/octeon-usb/Kconfig
+ create mode 100644 drivers/staging/octeon-usb/Makefile
+ create mode 100644 drivers/staging/octeon-usb/TODO
+ create mode 100644 drivers/staging/octeon-usb/cvmx-usb.c
+ create mode 100644 drivers/staging/octeon-usb/cvmx-usb.h
+ create mode 100644 drivers/staging/octeon-usb/cvmx-usbcx-defs.h
+ create mode 100644 drivers/staging/octeon-usb/cvmx-usbnx-defs.h
+ create mode 100644 drivers/staging/octeon-usb/octeon-hcd.c
+
+diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
+index 4464f26..f64b662 100644
+--- a/drivers/staging/Kconfig
++++ b/drivers/staging/Kconfig
+@@ -62,6 +62,8 @@ source "drivers/staging/line6/Kconfig"
+
+ source "drivers/staging/octeon/Kconfig"
+
++source "drivers/staging/octeon-usb/Kconfig"
++
+ source "drivers/staging/serqt_usb2/Kconfig"
+
+ source "drivers/staging/vt6655/Kconfig"
+diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
+index f689b9d..1fb58a1 100644
+--- a/drivers/staging/Makefile
++++ b/drivers/staging/Makefile
+@@ -25,6 +25,7 @@ obj-$(CONFIG_LINE6_USB) += line6/
+ obj-$(CONFIG_NETLOGIC_XLR_NET) += netlogic/
+ obj-$(CONFIG_USB_SERIAL_QUATECH2) += serqt_usb2/
+ obj-$(CONFIG_OCTEON_ETHERNET) += octeon/
++obj-$(CONFIG_OCTEON_USB) += octeon-usb/
+ obj-$(CONFIG_VT6655) += vt6655/
+ obj-$(CONFIG_VT6656) += vt6656/
+ obj-$(CONFIG_VME_BUS) += vme/
--- /dev/null
+Index: linux-3.10/drivers/staging/octeon-usb/octeon-hcd.c
+===================================================================
+--- linux-3.10.orig/drivers/staging/octeon-usb/octeon-hcd.c 2013-08-03 16:11:44.269610286 +0200
++++ linux-3.10/drivers/staging/octeon-usb/octeon-hcd.c 2013-08-04 13:18:54.011421971 +0200
+@@ -673,8 +673,9 @@
+ };
+
+
+-static int octeon_usb_driver_probe(struct device *dev)
++static int octeon_usb_driver_probe(struct platform_device *pdev)
+ {
++ struct device *dev = &pdev->dev;
+ int status;
+ int usb_num = to_platform_device(dev)->id;
+ int irq = platform_get_irq(to_platform_device(dev), 0);
+@@ -728,8 +729,9 @@
+ return 0;
+ }
+
+-static int octeon_usb_driver_remove(struct device *dev)
++static int octeon_usb_driver_remove(struct platform_device *pdev)
+ {
++ struct device *dev = &pdev->dev;
+ int status;
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct octeon_hcd *priv = hcd_to_octeon(hcd);
+@@ -748,30 +750,35 @@
+ return 0;
+ }
+
+-static struct device_driver octeon_usb_driver = {
+- .name = "OcteonUSB",
+- .bus = &platform_bus_type,
++static struct platform_driver octeon_usb_driver = {
++ .driver = {
++ .name = "OcteonUSB",
++ .owner = THIS_MODULE,
++ },
+ .probe = octeon_usb_driver_probe,
+ .remove = octeon_usb_driver_remove,
+ };
+
++static struct resource octeon_usb_resources = {
++ .start = OCTEON_IRQ_USB0,
++ .end = OCTEON_IRQ_USB0,
++ .flags = IORESOURCE_IRQ,
++};
++
++static struct platform_device octeon_usb_device = {
++ .name = "OcteonUSB",
++ .id = 0,
++ .resource = &octeon_usb_resources,
++ .num_resources = 1,
++};
+
+-#define MAX_USB_PORTS 10
+-static struct platform_device *pdev_glob[MAX_USB_PORTS];
+-static int octeon_usb_registered;
+ static int __init octeon_usb_module_init(void)
+ {
+ int num_devices = cvmx_usb_get_num_ports();
+- int device;
+
+ if (usb_disabled() || num_devices == 0)
+ return -ENODEV;
+
+- if (driver_register(&octeon_usb_driver))
+- return -ENOMEM;
+-
+- octeon_usb_registered = 1;
+-
+ /*
+ * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
+ * IOB priority registers. Under heavy network load USB
+@@ -792,37 +799,14 @@
+ cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
+ }
+
+- for (device = 0; device < num_devices; device++) {
+- struct resource irq_resource;
+- struct platform_device *pdev;
+- memset(&irq_resource, 0, sizeof(irq_resource));
+- irq_resource.start = (device == 0) ? OCTEON_IRQ_USB0 : OCTEON_IRQ_USB1;
+- irq_resource.end = irq_resource.start;
+- irq_resource.flags = IORESOURCE_IRQ;
+- pdev = platform_device_register_simple((char *)octeon_usb_driver. name, device, &irq_resource, 1);
+- if (IS_ERR(pdev)) {
+- driver_unregister(&octeon_usb_driver);
+- octeon_usb_registered = 0;
+- return PTR_ERR(pdev);
+- }
+- if (device < MAX_USB_PORTS)
+- pdev_glob[device] = pdev;
++ platform_device_register(&octeon_usb_device);
+
+- }
+- return 0;
++ return platform_driver_register(&octeon_usb_driver);
+ }
+
+ static void __exit octeon_usb_module_cleanup(void)
+ {
+- int i;
+-
+- for (i = 0; i < MAX_USB_PORTS; i++)
+- if (pdev_glob[i]) {
+- platform_device_unregister(pdev_glob[i]);
+- pdev_glob[i] = NULL;
+- }
+- if (octeon_usb_registered)
+- driver_unregister(&octeon_usb_driver);
++ platform_driver_unregister(&octeon_usb_driver);
+ }
+
+ MODULE_LICENSE("GPL");
--- /dev/null
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/generic
+ NAME:=Generic Octeon board
+ PACKAGES:=kmod-ath9k
+endef
+
+define Profile/generic/Description
+ Base packages for Octeon boards.
+endef
+$(eval $(call Profile,generic))
+
projects / openwrt / staging / hauke.git / commitdiff