regulator: s5m8767: Update s5m8767-regulator bindings document

s5m8767 regulator is used on Exynos platforms which use pin controller
to configure GPIOs. Update the example accordingly.

[This had previously been broken by code changes which failed to update
the documentation -- broonie]

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>

diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
index a35ff99003a55f4ad3edec6e6d4aa5d99879f2de..7364f7114fbdf8ae7de49f5df2281ebce5e1e46a 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
@@ -103,13 +103,13 @@ Example:
 
                s5m8767,pmic-buck-default-dvs-idx = <0>;
 
-               s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 1 0 0>, /* DVS1 */
-                                                <&gpx0 1 1 0 0>, /* DVS2 */
-                                                <&gpx0 2 1 0 0>; /* DVS3 */
+               s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
+                                                <&gpx0 1 0>, /* DVS2 */
+                                                <&gpx0 2 0>; /* DVS3 */
 
-               s5m8767,pmic-buck-ds-gpios = <&gpx2 3 1 0 0>, /* SET1 */
-                                               <&gpx2 4 1 0 0>, /* SET2 */
-                                               <&gpx2 5 1 0 0>; /* SET3 */
+               s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
+                                               <&gpx2 4 0>, /* SET2 */
+                                               <&gpx2 5 0>; /* SET3 */
 
                s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
                                                 <1250000>, <1200000>,