--- /dev/null
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+#ifndef __FSL_STREAM_ID_H
+#define __FSL_STREAM_ID_H
+
+/* Stream IDs on ls2085a devices are not hardwired and are
+ * programmed by sw. There are a limited number of stream IDs
+ * available, and the partitioning of them is scenario dependent.
+ * This header defines the partitioning between legacy, PCI,
+ * and DPAA2 devices.
+ *
+ * This partitiong can be customized in this file depending
+ * on the specific hardware config-- e.g. perhaps not all
+ * PEX controllers are in use.
+ *
+ * On LS2085 stream IDs are programmed in AMQ registers (32-bits) for
+ * each of the different bus masters. The relationship between
+ * the AMQ registers and stream IDs is defined in the table below:
+ * AMQ bit streamID bit
+ * ---------------------------
+ * PL[18] 9
+ * BMT[17] 8
+ * VA[16] 7
+ * [15] -
+ * ICID[14:7] -
+ * ICID[6:0] 6-0
+ * ----------------------------
+ */
+
+#define AMQ_PL_MASK (0x1 << 18) /* priviledge bit */
+#define AMQ_BMT_MASK (0x1 << 17) /* bypass bit */
+
+#define FSL_INVALID_STREAM_ID 0
+
+#define FSL_BYPASS_AMQ (AMQ_PL_MASK | AMQ_BMT_MASK)
+
+/* legacy devices */
+#define FSL_USB1_STREAM_ID 1
+#define FSL_USB2_STREAM_ID 2
+#define FSL_SDMMC_STREAM_ID 3
+#define FSL_SATA1_STREAM_ID 4
+#define FSL_SATA2_STREAM_ID 5
+#define FSL_DMA_STREAM_ID 6
+
+/* PCI - programmed in PEXn_LUT by OS */
+/* 4 IDs per controller */
+#define FSL_PEX1_STREAM_ID_START 7
+#define FSL_PEX1_STREAM_ID_END 10
+#define FSL_PEX2_STREAM_ID_START 11
+#define FSL_PEX2_STREAM_ID_END 14
+#define FSL_PEX3_STREAM_ID_START 15
+#define FSL_PEX3_STREAM_ID_END 18
+#define FSL_PEX4_STREAM_ID_START 19
+#define FSL_PEX4_STREAM_ID_END 22
+
+/* DPAA2 - set in MC DPC and alloced by MC */
+#define FSL_DPAA2_STREAM_ID_START 23
+#define FSL_DPAA2_STREAM_ID_END 63
+
+#endif
out_le32(&mc_ccsr_regs->reg_mcfbalr, reg_mcfbalr);
out_le32(&mc_ccsr_regs->reg_mcfbahr,
(u32)(mc_ram_aligned_base_addr >> 32));
- out_le32(&mc_ccsr_regs->reg_mcfapr, MCFAPR_BYPASS_ICID_MASK);
+ out_le32(&mc_ccsr_regs->reg_mcfapr, FSL_BYPASS_AMQ);
/*
* Tell the MC that we want delayed DPL deployment.
#define GCR1_M2_DE_RST BIT(14)
#define GCR1_M_ALL_DE_RST (GCR1_M1_DE_RST | GCR1_M2_DE_RST)
#define GSR_FS_MASK 0x3fffffff
-#define MCFAPR_PL_MASK (0x1 << 18)
-#define MCFAPR_BMT_MASK (0x1 << 17)
-#define MCFAPR_BYPASS_ICID_MASK \
- (MCFAPR_PL_MASK | MCFAPR_BMT_MASK)
#define SOC_MC_PORTALS_BASE_ADDR ((void __iomem *)0x00080C000000)
#define SOC_QBMAN_PORTALS_BASE_ADDR ((void __iomem *)0x000818000000)