ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "senao:green:wlan" "phy1tpt"
;;
+carambola2)
+ ucidef_set_led_netdev "lan" "LAN" "carambola2:orange:eth0" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "carambola2:orange:eth1" "eth1"
+ ucidef_set_led_wlan "wlan" "WLAN" "carambola2:green:wlan" "phy0tpt"
+ ;;
+
db120)
ucidef_set_led_usbdev "usb" "USB" "db120:green:usb" "1-1"
;;
*EmbWir-Dorin-Router)
name="ew-dorin-router"
;;
+ "8devices Carambola2"*)
+ name="carambola2"
+ ;;
esac
case "$machine" in
wlae-ag300n | \
nbg460n_550n_550nh | \
unifi | \
- unifi-outdoor )
+ unifi-outdoor | \
+ carambola2 )
[ "$magic" != "2705" ] && {
echo "Invalid image type."
return 1
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_CAP4200AG=y
+CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_DIR_600_A1=y
CONFIG_ATH79_MACH_DIR_615_C1=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_CAP4200AG=y
+CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_DIR_600_A1=y
CONFIG_ATH79_MACH_DIR_615_C1=y
--- /dev/null
+/*
+ * 8devices Carambola2 board support
+ *
+ * Copyright (C) 2013 Darius Augulis <darius@8devices.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define CARAMBOLA2_GPIO_LED_WLAN 0
+#define CARAMBOLA2_GPIO_LED_ETH0 14
+#define CARAMBOLA2_GPIO_LED_ETH1 13
+
+#define CARAMBOLA2_GPIO_BTN_JUMPSTART 11
+#define CARAMBOLA2_GPIO_BTN_RESET 12
+
+#define CARAMBOLA2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define CARAMBOLA2_KEYS_DEBOUNCE_INTERVAL (3 * CARAMBOLA2_KEYS_POLL_INTERVAL)
+
+#define CARAMBOLA2_MAC0_OFFSET 0x0000
+#define CARAMBOLA2_MAC1_OFFSET 0x0006
+#define CARAMBOLA2_CALDATA_OFFSET 0x1000
+#define CARAMBOLA2_WMAC_MAC_OFFSET 0x1002
+
+static struct gpio_led carambola2_leds_gpio[] __initdata = {
+ {
+ .name = "carambola2:green:wlan",
+ .gpio = CARAMBOLA2_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "carambola2:orange:eth0",
+ .gpio = CARAMBOLA2_GPIO_LED_ETH0,
+ .active_low = 0,
+ }, {
+ .name = "carambola2:orange:eth1",
+ .gpio = CARAMBOLA2_GPIO_LED_ETH1,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button carambola2_gpio_keys[] __initdata = {
+ {
+ .desc = "jumpstart button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = CARAMBOLA2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CARAMBOLA2_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ },
+ {
+ .desc = "reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = CARAMBOLA2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CARAMBOLA2_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init carambola2_common_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+ ath79_register_wmac(art + CARAMBOLA2_CALDATA_OFFSET,
+ art + CARAMBOLA2_WMAC_MAC_OFFSET);
+
+ ath79_setup_ar933x_phy4_switch(true, true);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + CARAMBOLA2_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + CARAMBOLA2_MAC1_OFFSET, 0);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+}
+
+static void __init carambola2_setup(void)
+{
+ carambola2_common_setup();
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(carambola2_leds_gpio),
+ carambola2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, CARAMBOLA2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(carambola2_gpio_keys),
+ carambola2_gpio_keys);
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_CARAMBOLA2, "CARAMBOLA2", "8devices Carambola2 board",
+ carambola2_setup);
--- /dev/null
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/CARAMBOLA2
+ NAME:=Carambola2 board from 8Devices
+ PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+define Profile/CARAMBOLA2/Description
+ Package set optimized for the 8devices Carambola2 board.
+endef
+
+$(eval $(call Profile,CARAMBOLA2))
ap113_mtd_layout=mtdparts=spi0.0:64k(u-boot),3008k(rootfs),896k(uImage),64k(NVRAM),64k(ART),3904k@0x10000(firmware)
ap121_mtdlayout_2M=mtdparts=spi0.0:64k(u-boot)ro,1216k(rootfs),704k(kernel),64k(art)ro,1920k@0x10000(firmware)
ap121_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
+carambola2_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2048k(kernel),13888k(rootfs),64k(nvram),64k(art)ro,15936k@0x50000(firmware)
ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art),7808k@0x50000(firmware)
ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware)
$(eval $(call SingleProfile,AthLzma,$(fs_64k),AP113,ap113,AP113,ttyS0,115200,$$(ap113_mtd_layout),917504,3080192,RK))
$(eval $(call SingleProfile,AthLzma,$(fs_64k),AP121_2M,ap121-2M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_2M),720896,1245184,RKuImage))
$(eval $(call SingleProfile,AthLzma,$(fs_64k),AP121_4M,ap121-4M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_4M),917504,2818048,RKuImage))
+$(eval $(call SingleProfile,AthLzma,$(fs_64k),CARAMBOLA2,carambola2,CARAMBOLA2,ttyATH0,115200,$$(carambola2_mtdlayout_16M),2097152,14221312,KRuImage))
$(eval $(call SingleProfile,AthLzma,$(fs_64k),AP121MINI,ap121-mini,AP121-MINI,ttyATH0,115200,$$(ap121_mtdlayout_4M),917504,2818048,RKuImage))
$(eval $(call SingleProfile,AthLzma,$(fs_64k),AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),1441792,6553600,KRuImage))
$(eval $(call SingleProfile,AthLzma,$(fs_64k),AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),1507328,14876672,RKuImage))
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,124 @@
+Index: linux-3.10/arch/mips/ath79/machtypes.h
+===================================================================
+--- linux-3.10.orig/arch/mips/ath79/machtypes.h 2013-07-11 22:29:04.592988418 +0200
++++ linux-3.10/arch/mips/ath79/machtypes.h 2013-07-11 22:42:15.781006779 +0200
+@@ -16,22 +16,125 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
+ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
++ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
};
#endif /* _ATH79_MACHTYPE_H */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -2,6 +2,61 @@ if ATH79
+Index: linux-3.10/arch/mips/ath79/Kconfig
+===================================================================
+--- linux-3.10.orig/arch/mips/ath79/Kconfig 2013-07-11 22:29:04.592988418 +0200
++++ linux-3.10/arch/mips/ath79/Kconfig 2013-07-11 22:41:53.245006256 +0200
+@@ -2,6 +2,61 @@
menu "Atheros AR71XX/AR724X/AR913X machine selection"
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
-@@ -15,6 +70,18 @@ config ATH79_MACH_AP121
- Say 'Y' here if you want your kernel to support the
- Atheros AP121 reference board.
-
+@@ -11,62 +66,654 @@
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros AP121 reference board.
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros AP121 reference board.
++
+config ATH79_MACH_AP132
+ bool "Atheros AP132 reference board"
+ select SOC_QCA955X
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP132 reference boards.
+
- config ATH79_MACH_AP136
- bool "Atheros AP136/AP135 reference board"
- select SOC_QCA955X
-@@ -41,6 +108,24 @@ config ATH79_MACH_AP81
- Say 'Y' here if you want your kernel to support the
- Atheros AP81 reference board.
-
++config ATH79_MACH_AP136
++ bool "Atheros AP136/AP135 reference board"
++ select SOC_QCA955X
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_NFC
++ select ATH79_DEV_SPI
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros AP136 or AP135 reference boards.
++
++config ATH79_MACH_AP81
++ bool "Atheros AP81 reference board"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros AP81 reference board.
++
+config ATH79_MACH_AP83
+ bool "Atheros AP83 board support"
+ select SOC_AR913X
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
- config ATH79_MACH_DB120
- bool "Atheros DB120 reference board"
- select SOC_AR934X
-@@ -56,6 +141,13 @@ config ATH79_MACH_DB120
- Say 'Y' here if you want your kernel to support the
- Atheros DB120 reference board.
-
++config ATH79_MACH_DB120
++ bool "Atheros DB120 reference board"
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_NFC
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros DB120 reference board.
++
+config ATH79_MACH_PB42
+ bool "Atheros PB42 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_M25P80
+
- config ATH79_MACH_PB44
- bool "Atheros PB44 reference board"
- select SOC_AR71XX
-@@ -68,6 +160,561 @@ config ATH79_MACH_PB44
- Say 'Y' here if you want your kernel to support the
- Atheros PB44 reference board.
-
++config ATH79_MACH_PB44
++ bool "Atheros PB44 reference board"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_SPI
++ select ATH79_DEV_USB
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros PB44 reference board.
++
+config ATH79_MACH_PB92
+ bool "Atheros PB92 board support"
+ select SOC_AR724X
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
-+
+
+-config ATH79_MACH_AP136
+- bool "Atheros AP136/AP135 reference board"
+config ATH79_MACH_MZK_W300NH
+ bool "Planex MZK-W300NH board support"
+ select SOC_AR913X
+
+config ATH79_MACH_ARCHER_C7
+ bool "TP-LINK Archer C7 board support"
-+ select SOC_QCA955X
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_SPI
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_NFC
+ select ATH79_DEV_SPI
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros AP136 or AP135 reference boards.
+
+-config ATH79_MACH_AP81
+- bool "Atheros AP81 reference board"
+config ATH79_MACH_TL_MR11U
+ bool "TP-LINK TL-MR11U/TL-MR3040 support"
+ select SOC_AR933X
+
+config ATH79_MACH_TL_WA901ND_V2
+ bool "TP-LINK TL-WA901ND v2 support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WDR3500
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros AP81 reference board.
+
+-config ATH79_MACH_DB120
+- bool "Atheros DB120 reference board"
+config ATH79_MACH_TL_WDR4300
+ bool "TP-LINK TL-WDR3600/4300/4310 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+- select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros DB120 reference board.
+
+-config ATH79_MACH_PB44
+- bool "Atheros PB44 reference board"
+config ATH79_MACH_TL_WR703N
+ bool "TP-LINK TL-WR703N support"
+ select SOC_AR933X
+
+config ATH79_MACH_TL_WR841N_V1
+ bool "TP-LINK TL-WR841N v1 support"
-+ select SOC_AR71XX
+ select SOC_AR71XX
+ select ATH79_DEV_DSA
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WR841N_V8
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
+ select ATH79_DEV_USB
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros PB44 reference board.
+
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
- select SOC_AR724X
-@@ -83,6 +730,24 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +730,34 @@
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
++
++config ATH79_MACH_CARAMBOLA2
++ bool "8devices Carambola2 board"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
+
endmenu
config SOC_AR71XX
-@@ -132,7 +797,10 @@ config ATH79_DEV_DSA
+@@ -132,7 +807,10 @@
config ATH79_DEV_ETH
def_bool n
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -164,4 +832,7 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,4 +842,7 @@
config ATH79_ROUTERBOOT
def_bool n
+ def_bool n
+
endif
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,78 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+Index: linux-3.10/arch/mips/ath79/Makefile
+===================================================================
+--- linux-3.10.orig/arch/mips/ath79/Makefile 2013-07-11 22:29:04.400988414 +0200
++++ linux-3.10/arch/mips/ath79/Makefile 2013-07-11 22:42:39.673007333 +0200
+@@ -38,9 +38,79 @@
#
# Machines
#
+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
+obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -180,6 +180,11 @@ void __init prom_init(void)
++obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
+Index: linux-3.10/arch/mips/ath79/prom.c
+===================================================================
+--- linux-3.10.orig/arch/mips/ath79/prom.c 2013-07-11 22:29:04.128988408 +0200
++++ linux-3.10/arch/mips/ath79/prom.c 2013-07-11 22:29:04.620988419 +0200
+@@ -180,6 +180,11 @@
ath79_prom_append_cmdline("board", env);
}
}
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,124 @@
+Index: linux-3.8.13/arch/mips/ath79/machtypes.h
+===================================================================
+--- linux-3.8.13.orig/arch/mips/ath79/machtypes.h 2013-07-11 21:39:45.340919744 +0200
++++ linux-3.8.13/arch/mips/ath79/machtypes.h 2013-07-11 22:02:50.208951883 +0200
+@@ -16,22 +16,125 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
+ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
++ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
+ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
+- ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
+ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
+ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
- ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
++ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
+ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
+ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
- ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
+- ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
++ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
+ ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */
};
#endif /* _ATH79_MACHTYPE_H */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -2,6 +2,61 @@ if ATH79
+Index: linux-3.8.13/arch/mips/ath79/Kconfig
+===================================================================
+--- linux-3.8.13.orig/arch/mips/ath79/Kconfig 2013-07-11 21:39:45.340919744 +0200
++++ linux-3.8.13/arch/mips/ath79/Kconfig 2013-07-11 21:57:12.076944035 +0200
+@@ -2,6 +2,61 @@
menu "Atheros AR71XX/AR724X/AR913X machine selection"
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
-@@ -15,6 +70,18 @@ config ATH79_MACH_AP121
- Say 'Y' here if you want your kernel to support the
- Atheros AP121 reference board.
-
+@@ -11,62 +66,654 @@
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros AP121 reference board.
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros AP121 reference board.
++
+config ATH79_MACH_AP132
+ bool "Atheros AP132 reference board"
+ select SOC_QCA955X
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP132 reference boards.
+
- config ATH79_MACH_AP136
- bool "Atheros AP136/AP135 reference board"
- select SOC_QCA955X
-@@ -41,6 +108,24 @@ config ATH79_MACH_AP81
- Say 'Y' here if you want your kernel to support the
- Atheros AP81 reference board.
-
++config ATH79_MACH_AP136
++ bool "Atheros AP136/AP135 reference board"
++ select SOC_QCA955X
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_NFC
++ select ATH79_DEV_SPI
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros AP136 or AP135 reference boards.
++
++config ATH79_MACH_AP81
++ bool "Atheros AP81 reference board"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros AP81 reference board.
++
+config ATH79_MACH_AP83
+ bool "Atheros AP83 board support"
+ select SOC_AR913X
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
- config ATH79_MACH_DB120
- bool "Atheros DB120 reference board"
- select SOC_AR934X
-@@ -56,6 +141,13 @@ config ATH79_MACH_DB120
- Say 'Y' here if you want your kernel to support the
- Atheros DB120 reference board.
-
++config ATH79_MACH_DB120
++ bool "Atheros DB120 reference board"
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_NFC
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros DB120 reference board.
++
+config ATH79_MACH_PB42
+ bool "Atheros PB42 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_M25P80
+
- config ATH79_MACH_PB44
- bool "Atheros PB44 reference board"
- select SOC_AR71XX
-@@ -68,6 +160,561 @@ config ATH79_MACH_PB44
- Say 'Y' here if you want your kernel to support the
- Atheros PB44 reference board.
-
++config ATH79_MACH_PB44
++ bool "Atheros PB44 reference board"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_SPI
++ select ATH79_DEV_USB
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros PB44 reference board.
++
+config ATH79_MACH_PB92
+ bool "Atheros PB92 board support"
+ select SOC_AR724X
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
-+
+
+-config ATH79_MACH_AP136
+- bool "Atheros AP136/AP135 reference board"
+config ATH79_MACH_MZK_W300NH
+ bool "Planex MZK-W300NH board support"
+ select SOC_AR913X
+
+config ATH79_MACH_ARCHER_C7
+ bool "TP-LINK Archer C7 board support"
-+ select SOC_QCA955X
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_SPI
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_NFC
+ select ATH79_DEV_SPI
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros AP136 or AP135 reference boards.
+
+-config ATH79_MACH_AP81
+- bool "Atheros AP81 reference board"
+config ATH79_MACH_TL_MR11U
+ bool "TP-LINK TL-MR11U/TL-MR3040 support"
+ select SOC_AR933X
+
+config ATH79_MACH_TL_WA901ND_V2
+ bool "TP-LINK TL-WA901ND v2 support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
+ select SOC_AR913X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_TL_WDR3500
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros AP81 reference board.
+
+-config ATH79_MACH_DB120
+- bool "Atheros DB120 reference board"
+config ATH79_MACH_TL_WDR4300
+ bool "TP-LINK TL-WDR3600/4300/4310 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+- select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros DB120 reference board.
+
+-config ATH79_MACH_PB44
+- bool "Atheros PB44 reference board"
+config ATH79_MACH_TL_WR703N
+ bool "TP-LINK TL-WR703N support"
+ select SOC_AR933X
+
+config ATH79_MACH_TL_WR841N_V1
+ bool "TP-LINK TL-WR841N v1 support"
-+ select SOC_AR71XX
+ select SOC_AR71XX
+ select ATH79_DEV_DSA
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_TL_WR841N_V8
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
+ select ATH79_DEV_USB
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros PB44 reference board.
+
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
- select SOC_AR724X
-@@ -83,6 +730,24 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +730,34 @@
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
++
++config ATH79_MACH_CARAMBOLA2
++ bool "8devices Carambola2 board"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
+
endmenu
config SOC_AR71XX
-@@ -132,7 +797,10 @@ config ATH79_DEV_DSA
+@@ -132,7 +807,10 @@
config ATH79_DEV_ETH
def_bool n
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -164,4 +832,7 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,4 +842,7 @@
config ATH79_ROUTERBOOT
def_bool n
+ def_bool n
+
endif
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,78 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+Index: linux-3.8.13/arch/mips/ath79/Makefile
+===================================================================
+--- linux-3.8.13.orig/arch/mips/ath79/Makefile 2013-07-11 21:39:45.288919744 +0200
++++ linux-3.8.13/arch/mips/ath79/Makefile 2013-07-11 22:02:13.884951040 +0200
+@@ -38,9 +38,79 @@
#
# Machines
#
+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
+obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -180,6 +180,11 @@ void __init prom_init(void)
++obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
+Index: linux-3.8.13/arch/mips/ath79/prom.c
+===================================================================
+--- linux-3.8.13.orig/arch/mips/ath79/prom.c 2013-07-11 21:39:45.212919741 +0200
++++ linux-3.8.13/arch/mips/ath79/prom.c 2013-07-11 21:39:45.344919744 +0200
+@@ -180,6 +180,11 @@
ath79_prom_append_cmdline("board", env);
}
}
projects / openwrt / staging / zorun.git / commitdiff