--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+ model = "ZyXEL EX5700 (Telenor)";
+ compatible = "zyxel,ex5700-telenor", "mediatek,mt7986a";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &gmac0;
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_green;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_amber;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+
+ // Stock U-Boot crashes unless /chosen/bootargs exists
+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8";
+ };
+
+ memory {
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+
+ keys {
+ compatible = "gpio-keys";
+ poll-interval = <20>;
+
+ reset-button {
+ label = "reset";
+ gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps-button {
+ label = "wps";
+ gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ red1 {
+ label = "red:net";
+ gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green1 {
+ label = "green:net";
+ gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ amber1 {
+ label = "amber:net";
+ gpios = <&pio 29 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ white2 {
+ label = "white:status";
+ gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red2 {
+ label = "red:status";
+ gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led_status_green: green2 {
+ label = "green:status";
+ gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led_status_amber: amber2 {
+ label = "amber:status";
+ gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+};
+
+ð {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_pins>;
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ label = "wan";
+ phy-mode = "2500base-x";
+ phy-handle = <&phy6>;
+ };
+
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+&mdio {
+ reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <50000>;
+ reset-post-delay-us = <20000>;
+
+ phy5: phy@5 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <5>;
+ };
+
+ phy6: phy@6 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <6>;
+ };
+
+ switch: switch@1f {
+ compatible = "mediatek,mt7531";
+ reg = <31>;
+ reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&switch {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan3";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "lan4";
+ phy-mode = "2500base-x";
+ phy-handle = <&phy5>;
+ };
+
+ port@6 {
+ reg = <6>;
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+};
+
+&crypto {
+ status = "okay";
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pins>;
+ status = "okay";
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0xa0000>;
+ };
+ };
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&wifi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wf_5g_pins>;
+
+ mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+&pio {
+ eth_pins: eth-pins {
+ mux {
+ function = "eth";
+ groups = "switch_int", "mdc_mdio";
+ };
+ };
+
+ pcie_pins: pcie-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie_pereset"; // "pcie_clk" and "pcie_wake" is unused?
+ };
+ };
+
+ spi_flash_pins: spi-flash-pins-33-to-38 {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ conf-pu {
+ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+ drive-strength = <8>;
+ mediatek,pull-up-adv = <0>; /* bias-disable */
+ };
+ conf-pd {
+ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+ drive-strength = <8>;
+ mediatek,pull-down-adv = <0>; /* bias-disable */
+ };
+ };
+
+ wf_5g_pins: wf_5g-pins {
+ mux {
+ function = "wifi";
+ groups = "wf_5g";
+ };
+ conf {
+ pins = "WF1_HB1", "WF1_HB2", "WF1_HB3", "WF1_HB4",
+ "WF1_HB0", "WF1_HB5", "WF1_HB6", "WF1_HB7",
+ "WF1_HB8", "WF1_TOP_CLK", "WF1_TOP_DATA";
+ drive-strength = <4>;
+ };
+ };
+
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_flash_pins>;
+ cs-gpios = <0>, <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+
+ flash@1 {
+ compatible = "spi-nand";
+ reg = <1>;
+
+ mediatek,nmbm;
+ mediatek,bmt-max-ratio = <1>;
+ mediatek,bmt-max-reserved-blocks = <64>;
+
+ spi-max-frequency = <20000000>;
+ spi-tx-buswidth = <4>;
+ spi-rx-buswidth = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "BL2";
+ reg = <0x000000 0x100000>;
+ read-only;
+ };
+ partition@100000 {
+ label = "u-boot-env";
+ reg = <0x100000 0x80000>;
+ };
+ factory: partition@180000 {
+ label = "Factory";
+ reg = <0x180000 0x200000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ partition@380000 {
+ label = "FIP";
+ reg = <0x380000 0x200000>;
+ read-only;
+ };
+ partition@580000 {
+ label = "ubi";
+ reg = <0x580000 0x1da80000>;
+ };
+ };
+ };
+};
+
+&ssusb {
+ vusb33-supply = <®_3p3v>;
+ vbus-supply = <®_5v>;
+ status = "okay";
+};
+
+&trng {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
projects / openwrt / openwrt.git / commitdiff