pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
pdev->conf.Attributes = CONF_ENABLE_IRQ;
- pdev->conf.IntType = INT_MEMORY_AND_IO;
/* See if we have a manufacturer identifier. Use it to set is_kme for
vendor quirks */
link->priv = info;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return bluecard_config(link);
}
link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return bt3c_config(link);
}
link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return btuart_config(link);
}
link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return dtl1_config(link);
}
if (pcmcia_loop_config(link, cm4000_config_check, NULL))
goto cs_release;
- link->conf.IntType = 00000002;
-
if (pcmcia_request_configuration(link, &link->conf))
goto cs_release;
dev->p_dev = link;
link->priv = dev;
- link->conf.IntType = INT_MEMORY_AND_IO;
dev_table[i] = link;
init_waitqueue_head(&dev->devq);
if (pcmcia_loop_config(link, cm4040_config_check, NULL))
goto cs_release;
- link->conf.IntType = 00000002;
-
fail_rc = pcmcia_request_configuration(link, &link->conf);
if (fail_rc != 0) {
dev_printk(KERN_INFO, &link->dev,
link->priv = dev;
dev->p_dev = link;
- link->conf.IntType = INT_MEMORY_AND_IO;
dev_table[i] = link;
init_waitqueue_head(&dev->devq);
return ret;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
/* Initialize the struct pcmcia_device structure */
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
ret = mgslpc_config(link);
if (ret)
goto failed;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 8;
link->conf.Present = PRESENT_OPTION;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return ide_config(link);
} /* ide_attach */
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->conf.ConfigIndex = 1;
p_dev->conf.Present = PRESENT_OPTION;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->conf.ConfigIndex = 1;
p_dev->conf.Present = PRESENT_OPTION;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return elsa_cs_config(link);
} /* elsa_cs_attach */
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
return sedlbauer_config(link);
} /* sedlbauer_attach */
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return teles_cs_config(link);
} /* teles_attach */
link->vpp = 0;
}
- link->conf.IntType = INT_MEMORY;
link->conf.ConfigIndex = 0;
DEBUG(2, "Setting Configuration");
ret = pcmcia_request_configuration(link, &link->conf);
link->priv = dev;
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY;
return pcmciamtd_config(link);
}
link->resource[0]->end = 32;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
dev->netdev_ops = &el3_netdev_ops;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
dev->netdev_ops = &el3_netdev_ops;
info->p_dev = link;
link->priv = dev;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
dev->netdev_ops = &axnet_netdev_ops;
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
p_dev->resource[0]->end = 16;
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
info->dev = dev;
p_dev->priv = info;
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
dev->netdev_ops = &fjn_netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[0]->end = 4;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
info->dev = dev;
link->resource[0]->end = 32;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
link->priv = dev;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
dev->netdev_ops = &pcnet_netdev_ops;
link->resource[0]->end = 16;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
/* The SMC91c92-specific entries in the device structure. */
dev->netdev_ops = &smc_netdev_ops;
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
/* Fill in card specific entries */
device, and can be hard-wired here.
*/
p_dev->conf.Attributes = 0;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
device, and can be hard-wired here.
*/
p_dev->conf.Attributes = 0;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
err = -ENODEV;
dev->conf.Attributes = CONF_ENABLE_IRQ;
- dev->conf.IntType = INT_MEMORY_AND_IO;
dev->resource[2]->flags |= WIN_ENABLE | WIN_DATA_WIDTH_16 |
WIN_USE_WAIT;
int ret;
PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
ret = prism2_config(p_dev);
if (ret) {
p_dev->priv = card;
p_dev->conf.Attributes = 0;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
lbs_pr_err("error in pcmcia_loop_config\n");
* number, sizes, and attributes of IO windows) are fixed by
* the nature of the device, and can be hard-wired here. */
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
return orinoco_cs_config(link);
} /* orinoco_cs_attach */
* number, sizes, and attributes of IO windows) are fixed by
* the nature of the device, and can be hard-wired here. */
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
return spectrum_cs_config(link);
} /* spectrum_cs_attach */
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->conf.ConfigIndex = 1;
p_dev->priv = dev;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->conf.ConfigIndex = 1;
dev = alloc_etherdev(sizeof(struct wl3501_card));
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return parport_config(link);
} /* parport_attach */
struct kref ref;
unsigned int state;
unsigned int Attributes;
- unsigned int IntType;
unsigned int ConfigBase;
unsigned char Option;
unsigned int CardValues;
if (!(s->state & SOCKET_PRESENT))
return -ENODEV;
- if (req->IntType & INT_CARDBUS) {
- dev_dbg(&p_dev->dev, "IntType may not be INT_CARDBUS\n");
- return -EINVAL;
- }
-
mutex_lock(&s->ops_mutex);
c = p_dev->function_config;
if (c->state & CONFIG_LOCKED) {
}
/* Pick memory or I/O card, DMA mode, interrupt */
- c->IntType = req->IntType;
c->Attributes = req->Attributes;
- if (req->IntType & INT_MEMORY_AND_IO)
+ if (p_dev->_io)
s->socket.flags |= SS_IOCARD;
- if (req->IntType & INT_ZOOMED_VIDEO)
- s->socket.flags |= SS_ZVCARD | SS_IOCARD;
if (req->Attributes & CONF_ENABLE_DMA)
s->socket.flags |= SS_DMA_MODE;
if (req->Attributes & CONF_ENABLE_SPKR) {
link->resource[0]->end = 0x20;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
return aha152x_config_cs(link);
link->resource[0]->end = 0x10;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
return fdomain_config(link);
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
ret = nsp_cs_config(link);
link->resource[0]->end = 16;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
return qlogic_config(link);
link->resource[0]->end = 16;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
return SYM53C500_config(link);
} /* SYM53C500_attach */
if (do_sound)
link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.IntType = INT_MEMORY_AND_IO;
-
return serial_config(link);
}
/* Initialize the pcmcia_device structure */
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
cur_dev = link;
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
cur_dev = link;
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
pcmcia_cur_dev = link;
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
pcmcia_cur_dev = link;
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
pcmcia_cur_dev = link;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
link->resource[0]->end = 16;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
cur_dev = link;
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
daqp_cs_config(link);
link->resource[0]->end = HCF_NUM_IO_PORTS;
link->resource[0]->flags= IO_DATA_PATH_WIDTH_16;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 5;
link->conf.Present = PRESENT_OPTION;
/* Create new ixj device */
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL);
if (!p_dev->priv) {
return -ENOMEM;
link->priv = local;
link->conf.Attributes = 0;
- link->conf.IntType = INT_MEMORY_AND_IO;
return sl811_cs_config(link);
}
/* For RequestConfiguration */
typedef struct config_req_t {
u_int Attributes;
- u_int IntType;
u_int ConfigBase;
u_char ConfigIndex;
u_int Present;
#define CONF_ENABLE_ESR 0x10
#define CONF_VALID_CLIENT 0x100
-/* IntType field */
-#define INT_MEMORY 0x01
-#define INT_MEMORY_AND_IO 0x02
-#define INT_CARDBUS 0x04
-#define INT_ZOOMED_VIDEO 0x08
-
/* Configuration registers present */
#define PRESENT_OPTION 0x001
#define PRESENT_STATUS 0x002
link->resource[0]->end = 16;
link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
link->resource[0]->end = 16;
link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
projects / openwrt / staging / blogic.git / commitdiff