-arm: kirkwood: add ZyXEL NSA310 device
+arm: kirkwood: add Zyxel NSA310 device
-This patch add ZyXEL NSA310 1-Bay Media Server
+This patch add Zyxel NSA310 1-Bay Media Server
-The ZyXEL NSA310 device is a Kirkwood based NAS:
+The Zyxel NSA310 device is a Kirkwood based NAS:
- SoC: Marvell 88F6702 1200Mhz
- SDRAM memory: 256MB DDR2 400Mhz
+CONFIG_KIRKWOOD=y
+CONFIG_SYS_TEXT_BASE=0x600000
+CONFIG_TARGET_NSA310=y
-+CONFIG_IDENT_STRING="\nZyXEL NSA310 1-Bay Power Media Server"
++CONFIG_IDENT_STRING="\nZyxel NSA310 1-Bay Power Media Server"
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_BOOTDELAY=3
+CONFIG_SYS_PROMPT="NSA310> "
+ /* reset the phy */
+ miiphy_reset(name, devadr);
+
-+ /* The ZyXEL NSA325 uses the 88E1310S Alaska (interface identical to 88E1318) */
++ /* The Zyxel NSA325 uses the 88E1310S Alaska (interface identical to 88E1318) */
+ /* and has an MCU attached to the LED[2] via tristate interrupt */
+ reg = 0;
+
+CONFIG_KIRKWOOD=y
+CONFIG_SYS_TEXT_BASE=0x600000
+CONFIG_TARGET_NSA325=y
-+CONFIG_IDENT_STRING="\nZyXEL NSA325 2-Bay Power Media Server"
++CONFIG_IDENT_STRING="\nZyxel NSA325 2-Bay Power Media Server"
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_BOOTDELAY=3
+CONFIG_SYS_PROMPT="NSA325> "
endef
define U-Boot/p2812hnufx_ram
- NAME:=ZyXEL P-2812HNU-Fx (RAM)
+ NAME:=Zyxel P-2812HNU-Fx (RAM)
BUILD_SUBTARGET:=xrx200
BUILD_DEVICES:=zyxel_p-2812hnu-f1
DDR_SETTINGS:=board/zyxel/p2812hnufx/ddr_settings.h
endef
define U-Boot/p2812hnufx_nandspl
- NAME:=ZyXEL P-2812HNU-Fx (NAND SPL)
+ NAME:=Zyxel P-2812HNU-Fx (NAND SPL)
BUILD_SUBTARGET:=xrx200
BUILD_DEVICES:=zyxel_p-2812hnu-f1
UBOOT_IMAGE:=u-boot.ltq.lzo.nandspl
From 3f7be04a148d23cdb5fd320e0e2923983f8bd1f4 Mon Sep 17 00:00:00 2001
From: Luka Perkov <luka@openwrt.org>
Date: Tue, 6 Aug 2013 22:51:00 +0200
-Subject: MIPS: add board support for ZyXEL P-2812HNU-Fx
+Subject: MIPS: add board support for Zyxel P-2812HNU-Fx
Signed-off-by: Luka Perkov <luka@openwrt.org>
+/*
+ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
+ *
-+ * The values have been extracted from original ZyXEL U-Boot.
++ * The values have been extracted from original Zyxel U-Boot.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define CONFIG_MACH_TYPE "P-2812HNU-Fx"
+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
-+#define CONFIG_BOARD_NAME "ZyXEL P-2812HNU-Fx"
++#define CONFIG_BOARD_NAME "Zyxel P-2812HNU-Fx"
+
+/* Configure SoC */
+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
define KernelPackage/mt7621-qtn-rgmii/description
Enable RGMII connected Quantenna module on MT7621.
- The Mitrastar designed ZyXEL WAP6805 has a Quantenna QV840
+ The Mitrastar designed Zyxel WAP6805 has a Quantenna QV840
module connected to the RGMII pins of the MT7621 SoC. For
unknown reasons, it is necessary to change the value of
the register at 0x1e110008 from default (usually 0xc000c)
define Package/zyxel-bootconfig
SECTION:=utils
CATEGORY:=Base system
- TITLE:=Utility for handling ZyXEL Bootconfig settings
+ TITLE:=Utility for handling Zyxel Bootconfig settings
MAINTAINER:=David Bauer <mail@david-bauer.net>
endef
define Package/zyxel-bootconfig/description
- This package contains an utility that allows handling ZyXEL Bootconfig settings.
+ This package contains an utility that allows handling Zyxel Bootconfig settings.
endef
define Build/Compile
/ {
compatible = "zyxel,nbg6616", "qca,qca9557";
- model = "ZyXEL NBG6616";
+ model = "Zyxel NBG6616";
aliases {
led-boot = &led_power;
/ {
compatible = "zyxel,emg2926-q10a", "zyxel,nbg6716", "qca,qca9558";
- model = "ZyXEL EMG2926-Q10A";
+ model = "Zyxel EMG2926-Q10A";
};
/ {
compatible = "zyxel,nbg6716", "qca,qca9558";
- model = "ZyXEL NBG6716";
+ model = "Zyxel NBG6716";
aliases {
led-boot = &led_power;
define Device/zyxel_nwa11xx
$(Device/loader-okli-uimage)
SOC := ar9342
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
LOADER_FLASH_OFFS := 0x050000
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
IMAGE_SIZE := 8192k
define Device/zyxel_nbg6616
SOC := qca9557
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NBG6616
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-rtc-pcf8563 \
kmod-ath10k-ct ath10k-firmware-qca988x-ct
define Device/zyxel_nbg6716
SOC := qca9558
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NBG6716
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct \
ath10k-firmware-qca988x-ct
+zidoo Shenzhen Zidoo Technology Co., Ltd.
+zii Zodiac Inflight Innovations
+zte ZTE Corp.
-+zyxel ZyXEL Communications Corp.
++zyxel Zyxel Communications Corp.
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -196,6 +196,8 @@ patternProperties:
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
- model = "ZyXEL NBG6617";
+ model = "Zyxel NBG6617";
compatible = "zyxel,nbg6617";
chosen {
partition12@6a0000 {
label = "not_root_data";
/*
- * for some strange reason, someone at ZyXEL
+ * for some strange reason, someone at Zyxel
* had the "great" idea to put the rootfs_data
* in front of rootfs... Don't do that!
* As a result this one, full MebiByte remains
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
- model = "ZyXEL WRE6606";
+ model = "Zyxel WRE6606";
compatible = "zyxel,wre6606";
aliases {
define Device/zyxel_nbg6617
$(call Device/FitImageLzma)
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NBG6617
SOC := qcom-ipq4018
KERNEL_SIZE := 4096k
RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGES += factory.bin
-# The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
+# The Zyxel firmware allows flashing thru the web-gui only when the rootfs is
# at least as large as the one of the initial firmware image (not the current
# one on the device). This only applies to the Web-UI, the bootlaoder ignores
# this minimum-size. However, the larger image can be flashed both ways.
define Device/zyxel_wre6606
$(call Device/FitImage)
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := WRE6606
DEVICE_DTS_CONFIG := config@4
SOC := qcom-ipq4018
#include <dt-bindings/leds/common.h>
/ {
- model = "ZyXEL NBG6817";
+ model = "Zyxel NBG6817";
compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064";
memory@0 {
tplink-safeloader sysupgrade | append-metadata
endef
-define Device/ZyXELImage
+define Device/ZyxelImage
KERNEL_SUFFIX := -uImage
KERNEL = kernel-bin | append-dtb | uImage none | \
pad-to $$(KERNEL_SIZE)
define Device/zyxel_nbg6817
$(Device/dsa-migration)
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NBG6817
SOC := qcom-ipq8065
KERNEL_SIZE := 4096k
SUPPORTED_DEVICES += nbg6817
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs \
kmod-fs-ext4 losetup
- $(call Device/ZyXELImage)
+ $(call Device/ZyxelImage)
endef
TARGET_DEVICES += zyxel_nbg6817
*/
/ {
- model = "ZyXEL NSA310b";
+ model = "Zyxel NSA310b";
compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
aliases {
*/
/ {
- model = "ZyXEL NSA310b";
+ model = "Zyxel NSA310b";
compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
aliases {
TARGET_DEVICES += seagate_goflexhome
define Device/zyxel_nsa310b
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NSA310b
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-hwmon-lm85 kmod-rtc-mv
TARGET_DEVICES += zyxel_nsa310b
define Device/zyxel_nsa310s
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NSA310S
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-rtc-mv
TARGET_DEVICES += zyxel_nsa310s
define Device/zyxel_nsa325
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NSA325
DEVICE_VARIANT := v1/v2
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
/ {
compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9";
- model = "ZyXEL P-2601HN-Fx";
+ model = "Zyxel P-2601HN-Fx";
chosen {
bootargs = "console=ttyLTQ0,115200";
/ {
compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
- model = "ZyXEL P-2812HNU-F1";
+ model = "Zyxel P-2812HNU-F1";
leds {
usb1 {
/ {
compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
- model = "ZyXEL P-2812HNU-F3";
+ model = "Zyxel P-2812HNU-F3";
};
&pci0 {
TARGET_DEVICES += zte_h201l
define Device/zyxel_p-2601hn
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := P-2601HN
DEVICE_VARIANT := F1/F3
IMAGE_SIZE := 15616k
define Device/zyxel_p-2812hnu-f1
$(Device/dsa-migration)
$(Device/NAND)
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := P-2812HNU
DEVICE_VARIANT := F1
BOARD_NAME := P2812HNUF1
define Device/zyxel_p-2812hnu-f3
$(Device/dsa-migration)
$(Device/NAND)
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := P-2812HNU
DEVICE_VARIANT := F3
BOARD_NAME := P2812HNUF3
#include "mt7981.dtsi"
/ {
- model = "ZyXEL NWA50AX Pro";
+ model = "Zyxel NWA50AX Pro";
compatible = "zyxel,nwa50ax-pro", "mediatek,mt7981";
aliases {
#include "mt7986a.dtsi"
/ {
- model = "ZyXEL EX5700 (Telenor)";
+ model = "Zyxel EX5700 (Telenor)";
compatible = "zyxel,ex5700-telenor", "mediatek,mt7986a";
aliases {
TARGET_DEVICES += zyxel_ex5601-t0-ubootmod
define Device/zyxel_ex5700-telenor
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := EX5700 (Telenor)
DEVICE_DTS := mt7986a-zyxel-ex5700-telenor
DEVICE_DTS_DIR := ../dts
TARGET_DEVICES += zyxel_ex5700-telenor
define Device/zyxel_nwa50ax-pro
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NWA50AX Pro
DEVICE_DTS := mt7981b-zyxel-nwa50ax-pro
DEVICE_DTS_DIR := ../dts
/ {
compatible = "zyxel,keenetic-viva", "ralink,mt7620a-soc";
- model = "ZyXEL Keenetic Viva";
+ model = "Zyxel Keenetic Viva";
aliases {
led-boot = &led_power_green;
/ {
compatible = "zyxel,keenetic-lite-iii-a", "ralink,mt7620n-soc";
- model = "ZyXEL Keenetic Lite III (rev. A)";
+ model = "Zyxel Keenetic Lite III (rev. A)";
aliases {
led-boot = &led_wan;
/ {
compatible = "zyxel,keenetic-omni-ii", "ralink,mt7620n-soc";
- model = "ZyXEL Keenetic Omni II";
+ model = "Zyxel Keenetic Omni II";
aliases {
led-boot = &led_power;
/ {
compatible = "zyxel,keenetic-omni", "ralink,mt7620n-soc";
- model = "ZyXEL Keenetic Omni";
+ model = "Zyxel Keenetic Omni";
aliases {
led-boot = &led_power;
/ {
compatible = "zyxel,lte3301-plus", "mediatek,mt7621-soc";
- model = "ZyXEL LTE3301-Plus";
+ model = "Zyxel LTE3301-Plus";
aliases {
label-mac-device = &gmac0;
/ {
compatible = "zyxel,lte5398-m904", "mediatek,mt7621-soc";
- model = "ZyXEL LTE5398-M904";
+ model = "Zyxel LTE5398-M904";
aliases {
label-mac-device = &gmac0;
/ {
compatible = "zyxel,nr7101", "mediatek,mt7621-soc";
- model = "ZyXEL NR7101";
+ model = "Zyxel NR7101";
aliases {
led-boot = &led_system_green;
/ {
compatible = "zyxel,nwa50ax", "mediatek,mt7621-soc";
- model = "ZyXEL NWA50AX";
+ model = "Zyxel NWA50AX";
aliases {
led-boot = &led_system_green;
/ {
compatible = "zyxel,nwa55axe", "mediatek,mt7621-soc";
- model = "ZyXEL NWA55AXE";
+ model = "Zyxel NWA55AXE";
};
/ {
compatible = "zyxel,wap6805", "mediatek,mt7621-soc";
- model = "ZyXEL WAP6805";
+ model = "Zyxel WAP6805";
aliases {
led-boot = &led_status_green;
/ {
compatible = "zyxel,wsm20", "mediatek,mt7621-soc";
- model = "ZyXEL WSM20";
+ model = "Zyxel WSM20";
aliases {
led-boot = &led_system_white;
/ {
compatible = "zyxel,keenetic-extra-ii", "mediatek,mt7628an-soc";
- model = "ZyXEL Keenetic Extra II";
+ model = "Zyxel Keenetic Extra II";
aliases {
led-boot = &led_power;
/ {
compatible = "zyxel,keenetic", "ralink,rt3052-soc";
- model = "ZyXEL Keenetic";
+ model = "Zyxel Keenetic";
aliases {
led-boot = &led_power;
/ {
compatible = "zyxel,nbg-419n", "ralink,rt3052-soc";
- model = "ZyXEL NBG-419N";
+ model = "Zyxel NBG-419N";
aliases {
led-boot = &led_power;
/ {
compatible = "zyxel,nbg-419n-v2", "ralink,rt3352-soc";
- model = "ZyXEL NBG-419N v2";
+ model = "Zyxel NBG-419N v2";
aliases {
led-boot = &led_power;
/ {
compatible = "zyxel,keenetic-4g-b", "ralink,rt5350-soc";
- model = "ZyXEL Keenetic 4G Rev.B";
+ model = "Zyxel Keenetic 4G Rev.B";
aliases {
led-boot = &led_power;
/ {
compatible = "zyxel,keenetic-lite-b", "ralink,rt5350-soc";
- model = "ZyXEL Keenetic Lite Rev.B";
+ model = "Zyxel Keenetic Lite Rev.B";
aliases {
led-boot = &led_power;
/ {
compatible = "zyxel,keenetic-start", "ralink,rt5350-soc";
- model = "ZyXEL Keenetic Start";
+ model = "Zyxel Keenetic Start";
aliases {
led-boot = &led_power;
define Device/zyxel_keenetic-lite-iii-a
SOC := mt7620n
IMAGE_SIZE := 7872k
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := Keenetic Lite III
DEVICE_VARIANT := A
IMAGES += factory.bin
define Device/zyxel_keenetic-omni
SOC := mt7620n
IMAGE_SIZE := 7872k
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := Keenetic Omni
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
IMAGES += factory.bin
define Device/zyxel_keenetic-omni-ii
SOC := mt7620n
IMAGE_SIZE := 7872k
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := Keenetic Omni II
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
IMAGES += factory.bin
define Device/zyxel_keenetic-viva
SOC := mt7620a
IMAGE_SIZE := 16064k
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := Keenetic Viva
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
kmod-switch-rtl8367b
define Device/zyxel_lte3301-plus
$(Device/nand)
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := LTE3301-PLUS
KERNEL_SIZE := 31488k
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 kmod-usb-ledtrig-usbport \
define Device/zyxel_lte5398-m904
$(Device/nand)
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := LTE5398-M904
KERNEL_SIZE := 31488k
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3 uqmi \
define Device/zyxel_nr7101
$(Device/nand)
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NR7101
KERNEL_SIZE := 31488k
DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
define Device/zyxel_nwa-ax
$(Device/nand)
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
KERNEL_SIZE := 8192k
DEVICE_PACKAGES := kmod-mt7915-firmware zyxel-bootconfig
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := WAP6805
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7621-qtn-rgmii -uboot-envtools
KERNEL := $$(KERNEL/lzma-loader) | uImage none | uimage-padhdr 160
$(Device/nand)
KERNEL_SIZE := 8192k
IMAGE_SIZE := 41943040
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := WSM20
DEVICE_PACKAGES := kmod-mt7915-firmware
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | znet-header V1.00(ABZF.0)C0
define Device/zyxel_keenetic-extra-ii
IMAGE_SIZE := 29824k
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := Keenetic Extra II
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
kmod-usb-ledtrig-usbport
define Device/zyxel_keenetic
SOC := rt3052
IMAGE_SIZE := 7872k
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := Keenetic
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ehci kmod-usb-ledtrig-usbport \
kmod-usb-dwc2
$(Device/uimage-lzma-loader)
SOC := rt5350
IMAGE_SIZE := 7872k
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := Keenetic 4G
DEVICE_VARIANT := B
DEFAULT := n
$(Device/uimage-lzma-loader)
SOC := rt5350
IMAGE_SIZE := 7872k
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := Keenetic Lite
DEVICE_VARIANT := B
DEFAULT := n
define Device/zyxel_keenetic-start
SOC := rt5350
IMAGE_SIZE := 3776k
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := Keenetic Start
DEFAULT := n
endef
define Device/zyxel_nbg-419n
SOC := rt3052
IMAGE_SIZE := 3776k
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NBG-419N
SUPPORTED_DEVICES += nbg-419n
DEFAULT := n
$(Device/uimage-lzma-loader)
SOC := rt3352
IMAGE_SIZE := 7872k
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NBG-419N
DEVICE_VARIANT := v2
SUPPORTED_DEVICES += nbg-419n2
/ {
compatible = "zyxel,gs1900-10hp", "realtek,rtl838x-soc";
- model = "ZyXEL GS1900-10HP Switch";
+ model = "Zyxel GS1900-10HP Switch";
/* i2c of the left SFP cage: port 9 */
i2c0: i2c-gpio-0 {
/ {
compatible = "zyxel,gs1900-8", "realtek,rtl838x-soc";
- model = "ZyXEL GS1900-8v1/v2 Switch";
+ model = "Zyxel GS1900-8v1/v2 Switch";
};
&gpio1 {
/ {
compatible = "zyxel,gs1900-8hp-v1", "realtek,rtl838x-soc";
- model = "ZyXEL GS1900-8HP v1 Switch";
+ model = "Zyxel GS1900-8HP v1 Switch";
};
&uart1 {
/ {
compatible = "zyxel,gs1900-8hp-v2", "realtek,rtl838x-soc";
- model = "ZyXEL GS1900-8HP v2 Switch";
+ model = "Zyxel GS1900-8HP v2 Switch";
};
&uart1 {
/ {
compatible = "zyxel,gs1900-16", "realtek,rtl838x-soc";
- model = "ZyXEL GS1900-16";
+ model = "Zyxel GS1900-16";
};
&mdio {
/ {
compatible = "zyxel,gs1900-24-v1", "realtek,rtl838x-soc";
- model = "ZyXEL GS1900-24 v1";
+ model = "Zyxel GS1900-24 v1";
memory@0 {
reg = <0x0 0x4000000>;
/ {
compatible = "zyxel,gs1900-24e", "realtek,rtl838x-soc";
- model = "ZyXEL GS1900-24E";
+ model = "Zyxel GS1900-24E";
};
&mdio {
/ {
compatible = "zyxel,gs1900-24ep", "realtek,rtl838x-soc";
- model = "ZyXEL GS1900-24EP Switch";
+ model = "Zyxel GS1900-24EP Switch";
};
&uart1 {
/ {
compatible = "zyxel,gs1900-24hp-v1", "realtek,rtl838x-soc";
- model = "ZyXEL GS1900-24HP v1";
+ model = "Zyxel GS1900-24HP v1";
memory@0 {
reg = <0x0 0x4000000>;
/ {
compatible = "zyxel,gs1900-24hp-v2", "realtek,rtl838x-soc";
- model = "ZyXEL GS1900-24HP v2 Switch";
+ model = "Zyxel GS1900-24HP v2 Switch";
/* i2c of the left SFP cage: port 25 */
i2c0: i2c-gpio-0 {
endef
define Device/zyxel_gs1900
- DEVICE_VENDOR := ZyXEL
+ DEVICE_VENDOR := Zyxel
IMAGE_SIZE := 6976k
UIMAGE_MAGIC := 0x83800000
KERNEL_INITRAMFS := \
SOC := rtl8380
DEVICE_MODEL := GS1900-8
DEVICE_VARIANT := v1
- DEVICE_ALT0_VENDOR := ZyXEL
+ DEVICE_ALT0_VENDOR := Zyxel
DEVICE_ALT0_MODEL := GS1900-8
DEVICE_ALT0_VARIANT := v2
ZYXEL_VERS := AAHH
projects / openwrt / staging / xback.git / commitdiff