+++ /dev/null
-From 9b78ef0c7997052e9eaa0f7a4513d546fa17358c Mon Sep 17 00:00:00 2001
-From: Mikhail Zhilkin <csharper2005@gmail.com>
-Date: Sun, 29 May 2022 11:07:14 +0000
-Subject: [PATCH] mtd: parsers: add support for Sercomm partitions
-
-This adds an MTD partition parser for the Sercomm partition table that
-is used in some Beeline, Netgear and Sercomm routers.
-
-The Sercomm partition map table contains real partition offsets, which
-may differ from device to device depending on the number and location of
-bad blocks on NAND.
-
-Original patch (proposed by NOGUCHI Hiroshi):
-Link: https://github.com/openwrt/openwrt/pull/1318#issuecomment-420607394
-
-Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
-Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220529110714.189732-1-csharper2005@gmail.com
----
- drivers/mtd/parsers/Kconfig | 9 ++
- drivers/mtd/parsers/Makefile | 1 +
- drivers/mtd/parsers/scpart.c | 248 +++++++++++++++++++++++++++++++++++
- 3 files changed, 258 insertions(+)
- create mode 100644 drivers/mtd/parsers/scpart.c
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -179,3 +179,12 @@ config MTD_REDBOOT_PARTS_READONLY
- 'FIS directory' images, enable this option.
-
- endif # MTD_REDBOOT_PARTS
-+
-+config MTD_SERCOMM_PARTS
-+ tristate "Sercomm partition table parser"
-+ depends on MTD && RALINK
-+ help
-+ This provides partitions table parser for devices with Sercomm
-+ partition map. This partition table contains real partition
-+ offsets, which may differ from device to device depending on the
-+ number and location of bad blocks on NAND.
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -10,5 +10,6 @@ ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)
- obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
-+obj-$(CONFIG_MTD_SERCOMM_PARTS) += scpart.o
- obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
---- /dev/null
-+++ b/drivers/mtd/parsers/scpart.c
-@@ -0,0 +1,248 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * drivers/mtd/scpart.c: Sercomm Partition Parser
-+ *
-+ * Copyright (C) 2018 NOGUCHI Hiroshi
-+ * Copyright (C) 2022 Mikhail Zhilkin
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/module.h>
-+
-+#define MOD_NAME "scpart"
-+
-+#ifdef pr_fmt
-+#undef pr_fmt
-+#endif
-+
-+#define pr_fmt(fmt) MOD_NAME ": " fmt
-+
-+#define ID_ALREADY_FOUND 0xffffffffUL
-+
-+#define MAP_OFFS_IN_BLK 0x800
-+#define MAP_MIRROR_NUM 2
-+
-+static const char sc_part_magic[] = {
-+ 'S', 'C', 'F', 'L', 'M', 'A', 'P', 'O', 'K', '\0',
-+};
-+#define PART_MAGIC_LEN sizeof(sc_part_magic)
-+
-+/* assumes that all fields are set by CPU native endian */
-+struct sc_part_desc {
-+ uint32_t part_id;
-+ uint32_t part_offs;
-+ uint32_t part_bytes;
-+};
-+
-+static uint32_t scpart_desc_is_valid(struct sc_part_desc *pdesc)
-+{
-+ return ((pdesc->part_id != 0xffffffffUL) &&
-+ (pdesc->part_offs != 0xffffffffUL) &&
-+ (pdesc->part_bytes != 0xffffffffUL));
-+}
-+
-+static int scpart_scan_partmap(struct mtd_info *master, loff_t partmap_offs,
-+ struct sc_part_desc **ppdesc)
-+{
-+ int cnt = 0;
-+ int res = 0;
-+ int res2;
-+ loff_t offs;
-+ size_t retlen;
-+ struct sc_part_desc *pdesc = NULL;
-+ struct sc_part_desc *tmpdesc;
-+ uint8_t *buf;
-+
-+ buf = kzalloc(master->erasesize, GFP_KERNEL);
-+ if (!buf) {
-+ res = -ENOMEM;
-+ goto out;
-+ }
-+
-+ res2 = mtd_read(master, partmap_offs, master->erasesize, &retlen, buf);
-+ if (res2 || retlen != master->erasesize) {
-+ res = -EIO;
-+ goto free;
-+ }
-+
-+ for (offs = MAP_OFFS_IN_BLK;
-+ offs < master->erasesize - sizeof(*tmpdesc);
-+ offs += sizeof(*tmpdesc)) {
-+ tmpdesc = (struct sc_part_desc *)&buf[offs];
-+ if (!scpart_desc_is_valid(tmpdesc))
-+ break;
-+ cnt++;
-+ }
-+
-+ if (cnt > 0) {
-+ int bytes = cnt * sizeof(*pdesc);
-+
-+ pdesc = kcalloc(cnt, sizeof(*pdesc), GFP_KERNEL);
-+ if (!pdesc) {
-+ res = -ENOMEM;
-+ goto free;
-+ }
-+ memcpy(pdesc, &(buf[MAP_OFFS_IN_BLK]), bytes);
-+
-+ *ppdesc = pdesc;
-+ res = cnt;
-+ }
-+
-+free:
-+ kfree(buf);
-+
-+out:
-+ return res;
-+}
-+
-+static int scpart_find_partmap(struct mtd_info *master,
-+ struct sc_part_desc **ppdesc)
-+{
-+ int magic_found = 0;
-+ int res = 0;
-+ int res2;
-+ loff_t offs = 0;
-+ size_t retlen;
-+ uint8_t rdbuf[PART_MAGIC_LEN];
-+
-+ while ((magic_found < MAP_MIRROR_NUM) &&
-+ (offs < master->size) &&
-+ !mtd_block_isbad(master, offs)) {
-+ res2 = mtd_read(master, offs, PART_MAGIC_LEN, &retlen, rdbuf);
-+ if (res2 || retlen != PART_MAGIC_LEN) {
-+ res = -EIO;
-+ goto out;
-+ }
-+ if (!memcmp(rdbuf, sc_part_magic, PART_MAGIC_LEN)) {
-+ pr_debug("Signature found at 0x%llx\n", offs);
-+ magic_found++;
-+ res = scpart_scan_partmap(master, offs, ppdesc);
-+ if (res > 0)
-+ goto out;
-+ }
-+ offs += master->erasesize;
-+ }
-+
-+out:
-+ if (res > 0)
-+ pr_info("Valid 'SC PART MAP' (%d partitions) found at 0x%llx\n", res, offs);
-+ else
-+ pr_info("No valid 'SC PART MAP' was found\n");
-+
-+ return res;
-+}
-+
-+static int scpart_parse(struct mtd_info *master,
-+ const struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data)
-+{
-+ const char *partname;
-+ int n;
-+ int nr_scparts;
-+ int nr_parts = 0;
-+ int res = 0;
-+ struct sc_part_desc *scpart_map = NULL;
-+ struct mtd_partition *parts = NULL;
-+ struct device_node *mtd_node;
-+ struct device_node *ofpart_node;
-+ struct device_node *pp;
-+
-+ mtd_node = mtd_get_of_node(master);
-+ if (!mtd_node) {
-+ res = -ENOENT;
-+ goto out;
-+ }
-+
-+ ofpart_node = of_get_child_by_name(mtd_node, "partitions");
-+ if (!ofpart_node) {
-+ pr_info("%s: 'partitions' subnode not found on %pOF.\n",
-+ master->name, mtd_node);
-+ res = -ENOENT;
-+ goto out;
-+ }
-+
-+ nr_scparts = scpart_find_partmap(master, &scpart_map);
-+ if (nr_scparts <= 0) {
-+ pr_info("No any partitions was found in 'SC PART MAP'.\n");
-+ res = -ENOENT;
-+ goto free;
-+ }
-+
-+ parts = kcalloc(of_get_child_count(ofpart_node), sizeof(*parts),
-+ GFP_KERNEL);
-+ if (!parts) {
-+ res = -ENOMEM;
-+ goto free;
-+ }
-+
-+ for_each_child_of_node(ofpart_node, pp) {
-+ u32 scpart_id;
-+
-+ if (of_property_read_u32(pp, "sercomm,scpart-id", &scpart_id))
-+ continue;
-+
-+ for (n = 0 ; n < nr_scparts ; n++)
-+ if ((scpart_map[n].part_id != ID_ALREADY_FOUND) &&
-+ (scpart_id == scpart_map[n].part_id))
-+ break;
-+ if (n >= nr_scparts)
-+ /* not match */
-+ continue;
-+
-+ /* add the partition found in OF into MTD partition array */
-+ parts[nr_parts].offset = scpart_map[n].part_offs;
-+ parts[nr_parts].size = scpart_map[n].part_bytes;
-+ parts[nr_parts].of_node = pp;
-+
-+ if (!of_property_read_string(pp, "label", &partname))
-+ parts[nr_parts].name = partname;
-+ if (of_property_read_bool(pp, "read-only"))
-+ parts[nr_parts].mask_flags |= MTD_WRITEABLE;
-+ if (of_property_read_bool(pp, "lock"))
-+ parts[nr_parts].mask_flags |= MTD_POWERUP_LOCK;
-+
-+ /* mark as 'done' */
-+ scpart_map[n].part_id = ID_ALREADY_FOUND;
-+
-+ nr_parts++;
-+ }
-+
-+ if (nr_parts > 0) {
-+ *pparts = parts;
-+ res = nr_parts;
-+ } else
-+ pr_info("No partition in OF matches partition ID with 'SC PART MAP'.\n");
-+
-+ of_node_put(pp);
-+
-+free:
-+ kfree(scpart_map);
-+ if (res <= 0)
-+ kfree(parts);
-+
-+out:
-+ return res;
-+}
-+
-+static const struct of_device_id scpart_parser_of_match_table[] = {
-+ { .compatible = "sercomm,sc-partitions" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, scpart_parser_of_match_table);
-+
-+static struct mtd_part_parser scpart_parser = {
-+ .parse_fn = scpart_parse,
-+ .name = "scpart",
-+ .of_match_table = scpart_parser_of_match_table,
-+};
-+module_mtd_part_parser(scpart_parser);
-+
-+/* mtd parsers will request the module by parser name */
-+MODULE_ALIAS("scpart");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("NOGUCHI Hiroshi <drvlabo@gmail.com>");
-+MODULE_AUTHOR("Mikhail Zhilkin <csharper2005@gmail.com>");
-+MODULE_DESCRIPTION("Sercomm partition parser");
--- /dev/null
+From 9b78ef0c7997052e9eaa0f7a4513d546fa17358c Mon Sep 17 00:00:00 2001
+From: Mikhail Zhilkin <csharper2005@gmail.com>
+Date: Sun, 29 May 2022 11:07:14 +0000
+Subject: [PATCH] mtd: parsers: add support for Sercomm partitions
+
+This adds an MTD partition parser for the Sercomm partition table that
+is used in some Beeline, Netgear and Sercomm routers.
+
+The Sercomm partition map table contains real partition offsets, which
+may differ from device to device depending on the number and location of
+bad blocks on NAND.
+
+Original patch (proposed by NOGUCHI Hiroshi):
+Link: https://github.com/openwrt/openwrt/pull/1318#issuecomment-420607394
+
+Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
+Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Link: https://lore.kernel.org/linux-mtd/20220529110714.189732-1-csharper2005@gmail.com
+---
+ drivers/mtd/parsers/Kconfig | 9 ++
+ drivers/mtd/parsers/Makefile | 1 +
+ drivers/mtd/parsers/scpart.c | 248 +++++++++++++++++++++++++++++++++++
+ 3 files changed, 258 insertions(+)
+ create mode 100644 drivers/mtd/parsers/scpart.c
+
+--- a/drivers/mtd/parsers/Kconfig
++++ b/drivers/mtd/parsers/Kconfig
+@@ -179,3 +179,12 @@ config MTD_REDBOOT_PARTS_READONLY
+ 'FIS directory' images, enable this option.
+
+ endif # MTD_REDBOOT_PARTS
++
++config MTD_SERCOMM_PARTS
++ tristate "Sercomm partition table parser"
++ depends on MTD && RALINK
++ help
++ This provides partitions table parser for devices with Sercomm
++ partition map. This partition table contains real partition
++ offsets, which may differ from device to device depending on the
++ number and location of bad blocks on NAND.
+--- a/drivers/mtd/parsers/Makefile
++++ b/drivers/mtd/parsers/Makefile
+@@ -10,5 +10,6 @@ ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)
+ obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o
+ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+ obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
++obj-$(CONFIG_MTD_SERCOMM_PARTS) += scpart.o
+ obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
+ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+--- /dev/null
++++ b/drivers/mtd/parsers/scpart.c
+@@ -0,0 +1,248 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++/*
++ * drivers/mtd/scpart.c: Sercomm Partition Parser
++ *
++ * Copyright (C) 2018 NOGUCHI Hiroshi
++ * Copyright (C) 2022 Mikhail Zhilkin
++ */
++
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/module.h>
++
++#define MOD_NAME "scpart"
++
++#ifdef pr_fmt
++#undef pr_fmt
++#endif
++
++#define pr_fmt(fmt) MOD_NAME ": " fmt
++
++#define ID_ALREADY_FOUND 0xffffffffUL
++
++#define MAP_OFFS_IN_BLK 0x800
++#define MAP_MIRROR_NUM 2
++
++static const char sc_part_magic[] = {
++ 'S', 'C', 'F', 'L', 'M', 'A', 'P', 'O', 'K', '\0',
++};
++#define PART_MAGIC_LEN sizeof(sc_part_magic)
++
++/* assumes that all fields are set by CPU native endian */
++struct sc_part_desc {
++ uint32_t part_id;
++ uint32_t part_offs;
++ uint32_t part_bytes;
++};
++
++static uint32_t scpart_desc_is_valid(struct sc_part_desc *pdesc)
++{
++ return ((pdesc->part_id != 0xffffffffUL) &&
++ (pdesc->part_offs != 0xffffffffUL) &&
++ (pdesc->part_bytes != 0xffffffffUL));
++}
++
++static int scpart_scan_partmap(struct mtd_info *master, loff_t partmap_offs,
++ struct sc_part_desc **ppdesc)
++{
++ int cnt = 0;
++ int res = 0;
++ int res2;
++ loff_t offs;
++ size_t retlen;
++ struct sc_part_desc *pdesc = NULL;
++ struct sc_part_desc *tmpdesc;
++ uint8_t *buf;
++
++ buf = kzalloc(master->erasesize, GFP_KERNEL);
++ if (!buf) {
++ res = -ENOMEM;
++ goto out;
++ }
++
++ res2 = mtd_read(master, partmap_offs, master->erasesize, &retlen, buf);
++ if (res2 || retlen != master->erasesize) {
++ res = -EIO;
++ goto free;
++ }
++
++ for (offs = MAP_OFFS_IN_BLK;
++ offs < master->erasesize - sizeof(*tmpdesc);
++ offs += sizeof(*tmpdesc)) {
++ tmpdesc = (struct sc_part_desc *)&buf[offs];
++ if (!scpart_desc_is_valid(tmpdesc))
++ break;
++ cnt++;
++ }
++
++ if (cnt > 0) {
++ int bytes = cnt * sizeof(*pdesc);
++
++ pdesc = kcalloc(cnt, sizeof(*pdesc), GFP_KERNEL);
++ if (!pdesc) {
++ res = -ENOMEM;
++ goto free;
++ }
++ memcpy(pdesc, &(buf[MAP_OFFS_IN_BLK]), bytes);
++
++ *ppdesc = pdesc;
++ res = cnt;
++ }
++
++free:
++ kfree(buf);
++
++out:
++ return res;
++}
++
++static int scpart_find_partmap(struct mtd_info *master,
++ struct sc_part_desc **ppdesc)
++{
++ int magic_found = 0;
++ int res = 0;
++ int res2;
++ loff_t offs = 0;
++ size_t retlen;
++ uint8_t rdbuf[PART_MAGIC_LEN];
++
++ while ((magic_found < MAP_MIRROR_NUM) &&
++ (offs < master->size) &&
++ !mtd_block_isbad(master, offs)) {
++ res2 = mtd_read(master, offs, PART_MAGIC_LEN, &retlen, rdbuf);
++ if (res2 || retlen != PART_MAGIC_LEN) {
++ res = -EIO;
++ goto out;
++ }
++ if (!memcmp(rdbuf, sc_part_magic, PART_MAGIC_LEN)) {
++ pr_debug("Signature found at 0x%llx\n", offs);
++ magic_found++;
++ res = scpart_scan_partmap(master, offs, ppdesc);
++ if (res > 0)
++ goto out;
++ }
++ offs += master->erasesize;
++ }
++
++out:
++ if (res > 0)
++ pr_info("Valid 'SC PART MAP' (%d partitions) found at 0x%llx\n", res, offs);
++ else
++ pr_info("No valid 'SC PART MAP' was found\n");
++
++ return res;
++}
++
++static int scpart_parse(struct mtd_info *master,
++ const struct mtd_partition **pparts,
++ struct mtd_part_parser_data *data)
++{
++ const char *partname;
++ int n;
++ int nr_scparts;
++ int nr_parts = 0;
++ int res = 0;
++ struct sc_part_desc *scpart_map = NULL;
++ struct mtd_partition *parts = NULL;
++ struct device_node *mtd_node;
++ struct device_node *ofpart_node;
++ struct device_node *pp;
++
++ mtd_node = mtd_get_of_node(master);
++ if (!mtd_node) {
++ res = -ENOENT;
++ goto out;
++ }
++
++ ofpart_node = of_get_child_by_name(mtd_node, "partitions");
++ if (!ofpart_node) {
++ pr_info("%s: 'partitions' subnode not found on %pOF.\n",
++ master->name, mtd_node);
++ res = -ENOENT;
++ goto out;
++ }
++
++ nr_scparts = scpart_find_partmap(master, &scpart_map);
++ if (nr_scparts <= 0) {
++ pr_info("No any partitions was found in 'SC PART MAP'.\n");
++ res = -ENOENT;
++ goto free;
++ }
++
++ parts = kcalloc(of_get_child_count(ofpart_node), sizeof(*parts),
++ GFP_KERNEL);
++ if (!parts) {
++ res = -ENOMEM;
++ goto free;
++ }
++
++ for_each_child_of_node(ofpart_node, pp) {
++ u32 scpart_id;
++
++ if (of_property_read_u32(pp, "sercomm,scpart-id", &scpart_id))
++ continue;
++
++ for (n = 0 ; n < nr_scparts ; n++)
++ if ((scpart_map[n].part_id != ID_ALREADY_FOUND) &&
++ (scpart_id == scpart_map[n].part_id))
++ break;
++ if (n >= nr_scparts)
++ /* not match */
++ continue;
++
++ /* add the partition found in OF into MTD partition array */
++ parts[nr_parts].offset = scpart_map[n].part_offs;
++ parts[nr_parts].size = scpart_map[n].part_bytes;
++ parts[nr_parts].of_node = pp;
++
++ if (!of_property_read_string(pp, "label", &partname))
++ parts[nr_parts].name = partname;
++ if (of_property_read_bool(pp, "read-only"))
++ parts[nr_parts].mask_flags |= MTD_WRITEABLE;
++ if (of_property_read_bool(pp, "lock"))
++ parts[nr_parts].mask_flags |= MTD_POWERUP_LOCK;
++
++ /* mark as 'done' */
++ scpart_map[n].part_id = ID_ALREADY_FOUND;
++
++ nr_parts++;
++ }
++
++ if (nr_parts > 0) {
++ *pparts = parts;
++ res = nr_parts;
++ } else
++ pr_info("No partition in OF matches partition ID with 'SC PART MAP'.\n");
++
++ of_node_put(pp);
++
++free:
++ kfree(scpart_map);
++ if (res <= 0)
++ kfree(parts);
++
++out:
++ return res;
++}
++
++static const struct of_device_id scpart_parser_of_match_table[] = {
++ { .compatible = "sercomm,sc-partitions" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, scpart_parser_of_match_table);
++
++static struct mtd_part_parser scpart_parser = {
++ .parse_fn = scpart_parse,
++ .name = "scpart",
++ .of_match_table = scpart_parser_of_match_table,
++};
++module_mtd_part_parser(scpart_parser);
++
++/* mtd parsers will request the module by parser name */
++MODULE_ALIAS("scpart");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("NOGUCHI Hiroshi <drvlabo@gmail.com>");
++MODULE_AUTHOR("Mikhail Zhilkin <csharper2005@gmail.com>");
++MODULE_DESCRIPTION("Sercomm partition parser");
+++ /dev/null
-From ad9b10d1eaada169bd764abcab58f08538877e26 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 22 Jun 2022 03:06:28 +0200
-Subject: mtd: core: introduce of support for dynamic partitions
-
-We have many parser that register mtd partitions at runtime. One example
-is the cmdlinepart or the smem-part parser where the compatible is defined
-in the dts and the partitions gets detected and registered by the
-parser. This is problematic for the NVMEM subsystem that requires an OF
-node to detect NVMEM cells.
-
-To fix this problem, introduce an additional logic that will try to
-assign an OF node to the MTD if declared.
-
-On MTD addition, it will be checked if the MTD has an OF node and if
-not declared will check if a partition with the same label / node name is
-declared in DTS. If an exact match is found, the partition dynamically
-allocated by the parser will have a connected OF node.
-
-The NVMEM subsystem will detect the OF node and register any NVMEM cells
-declared statically in the DTS.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220622010628.30414-4-ansuelsmth@gmail.com
----
- drivers/mtd/mtdcore.c | 61 +++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 61 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -561,6 +561,66 @@ static int mtd_nvmem_add(struct mtd_info
- return 0;
- }
-
-+static void mtd_check_of_node(struct mtd_info *mtd)
-+{
-+ struct device_node *partitions, *parent_dn, *mtd_dn = NULL;
-+ const char *pname, *prefix = "partition-";
-+ int plen, mtd_name_len, offset, prefix_len;
-+ struct mtd_info *parent;
-+ bool found = false;
-+
-+ /* Check if MTD already has a device node */
-+ if (dev_of_node(&mtd->dev))
-+ return;
-+
-+ /* Check if a partitions node exist */
-+ parent = mtd->parent;
-+ parent_dn = dev_of_node(&parent->dev);
-+ if (!parent_dn)
-+ return;
-+
-+ partitions = of_get_child_by_name(parent_dn, "partitions");
-+ if (!partitions)
-+ goto exit_parent;
-+
-+ prefix_len = strlen(prefix);
-+ mtd_name_len = strlen(mtd->name);
-+
-+ /* Search if a partition is defined with the same name */
-+ for_each_child_of_node(partitions, mtd_dn) {
-+ offset = 0;
-+
-+ /* Skip partition with no/wrong prefix */
-+ if (!of_node_name_prefix(mtd_dn, "partition-"))
-+ continue;
-+
-+ /* Label have priority. Check that first */
-+ if (of_property_read_string(mtd_dn, "label", &pname)) {
-+ of_property_read_string(mtd_dn, "name", &pname);
-+ offset = prefix_len;
-+ }
-+
-+ plen = strlen(pname) - offset;
-+ if (plen == mtd_name_len &&
-+ !strncmp(mtd->name, pname + offset, plen)) {
-+ found = true;
-+ break;
-+ }
-+ }
-+
-+ if (!found)
-+ goto exit_partitions;
-+
-+ /* Set of_node only for nvmem */
-+ if (of_device_is_compatible(mtd_dn, "nvmem-cells"))
-+ mtd_set_of_node(mtd, mtd_dn);
-+
-+exit_partitions:
-+ of_node_put(partitions);
-+exit_parent:
-+ of_node_put(parent_dn);
-+}
-+
- /**
- * add_mtd_device - register an MTD device
- * @mtd: pointer to new MTD device info structure
-@@ -666,6 +726,7 @@ int add_mtd_device(struct mtd_info *mtd)
- mtd->dev.devt = MTD_DEVT(i);
- dev_set_name(&mtd->dev, "mtd%d", i);
- dev_set_drvdata(&mtd->dev, mtd);
-+ mtd_check_of_node(mtd);
- of_node_get(mtd_get_of_node(mtd));
- error = device_register(&mtd->dev);
- if (error)
--- /dev/null
+From ad9b10d1eaada169bd764abcab58f08538877e26 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Wed, 22 Jun 2022 03:06:28 +0200
+Subject: mtd: core: introduce of support for dynamic partitions
+
+We have many parser that register mtd partitions at runtime. One example
+is the cmdlinepart or the smem-part parser where the compatible is defined
+in the dts and the partitions gets detected and registered by the
+parser. This is problematic for the NVMEM subsystem that requires an OF
+node to detect NVMEM cells.
+
+To fix this problem, introduce an additional logic that will try to
+assign an OF node to the MTD if declared.
+
+On MTD addition, it will be checked if the MTD has an OF node and if
+not declared will check if a partition with the same label / node name is
+declared in DTS. If an exact match is found, the partition dynamically
+allocated by the parser will have a connected OF node.
+
+The NVMEM subsystem will detect the OF node and register any NVMEM cells
+declared statically in the DTS.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Link: https://lore.kernel.org/linux-mtd/20220622010628.30414-4-ansuelsmth@gmail.com
+---
+ drivers/mtd/mtdcore.c | 61 +++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 61 insertions(+)
+
+--- a/drivers/mtd/mtdcore.c
++++ b/drivers/mtd/mtdcore.c
+@@ -561,6 +561,66 @@ static int mtd_nvmem_add(struct mtd_info
+ return 0;
+ }
+
++static void mtd_check_of_node(struct mtd_info *mtd)
++{
++ struct device_node *partitions, *parent_dn, *mtd_dn = NULL;
++ const char *pname, *prefix = "partition-";
++ int plen, mtd_name_len, offset, prefix_len;
++ struct mtd_info *parent;
++ bool found = false;
++
++ /* Check if MTD already has a device node */
++ if (dev_of_node(&mtd->dev))
++ return;
++
++ /* Check if a partitions node exist */
++ parent = mtd->parent;
++ parent_dn = dev_of_node(&parent->dev);
++ if (!parent_dn)
++ return;
++
++ partitions = of_get_child_by_name(parent_dn, "partitions");
++ if (!partitions)
++ goto exit_parent;
++
++ prefix_len = strlen(prefix);
++ mtd_name_len = strlen(mtd->name);
++
++ /* Search if a partition is defined with the same name */
++ for_each_child_of_node(partitions, mtd_dn) {
++ offset = 0;
++
++ /* Skip partition with no/wrong prefix */
++ if (!of_node_name_prefix(mtd_dn, "partition-"))
++ continue;
++
++ /* Label have priority. Check that first */
++ if (of_property_read_string(mtd_dn, "label", &pname)) {
++ of_property_read_string(mtd_dn, "name", &pname);
++ offset = prefix_len;
++ }
++
++ plen = strlen(pname) - offset;
++ if (plen == mtd_name_len &&
++ !strncmp(mtd->name, pname + offset, plen)) {
++ found = true;
++ break;
++ }
++ }
++
++ if (!found)
++ goto exit_partitions;
++
++ /* Set of_node only for nvmem */
++ if (of_device_is_compatible(mtd_dn, "nvmem-cells"))
++ mtd_set_of_node(mtd, mtd_dn);
++
++exit_partitions:
++ of_node_put(partitions);
++exit_parent:
++ of_node_put(parent_dn);
++}
++
+ /**
+ * add_mtd_device - register an MTD device
+ * @mtd: pointer to new MTD device info structure
+@@ -666,6 +726,7 @@ int add_mtd_device(struct mtd_info *mtd)
+ mtd->dev.devt = MTD_DEVT(i);
+ dev_set_name(&mtd->dev, "mtd%d", i);
+ dev_set_drvdata(&mtd->dev, mtd);
++ mtd_check_of_node(mtd);
+ of_node_get(mtd_get_of_node(mtd));
+ error = device_register(&mtd->dev);
+ if (error)
+++ /dev/null
-From 13344f8ce8a0d98aa7f5d69ce3b47393c73a343b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 27 Dec 2021 15:59:04 +0100
-Subject: [PATCH] dt-bindings: leds: add Broadcom's BCM63138 controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom used 2 LEDs hardware blocks for their BCM63xx SoCs:
-1. Older one (BCM6318, BCM6328, BCM6362, BCM63268, BCM6838)
-2. Newer one (BCM6848, BCM6858, BCM63138, BCM63148, BCM63381, BCM68360)
-
-The newer one was also later also used on BCM4908 SoC.
-
-Old block is already documented in the leds-bcm6328.yaml. This binding
-documents the new one which uses different registers & programming. It's
-first used in BCM63138 thus the binding name.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- .../bindings/leds/leds-bcm63138.yaml | 95 +++++++++++++++++++
- 1 file changed, 95 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-@@ -0,0 +1,95 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom's BCM63138 LEDs controller
-+
-+maintainers:
-+ - Rafał Miłecki <rafal@milecki.pl>
-+
-+description: |
-+ This LEDs controller was first used on BCM63138 and later reused on BCM4908,
-+ BCM6848, BCM6858, BCM63138, BCM63148, BCM63381 and BCM68360 SoCs.
-+
-+ It supports up to 32 LEDs that can be connected parallelly or serially. It
-+ also includes limited support for hardware blinking.
-+
-+ Binding serially connected LEDs isn't documented yet.
-+
-+properties:
-+ compatible:
-+ oneOf:
-+ - items:
-+ - enum:
-+ - brcm,bcm4908-leds
-+ - brcm,bcm6848-leds
-+ - brcm,bcm6858-leds
-+ - brcm,bcm63148-leds
-+ - brcm,bcm63381-leds
-+ - brcm,bcm68360-leds
-+ - const: brcm,bcm63138-leds
-+ - const: brcm,bcm63138-leds
-+
-+ reg:
-+ maxItems: 1
-+
-+ "#address-cells":
-+ const: 1
-+
-+ "#size-cells":
-+ const: 0
-+
-+patternProperties:
-+ "^led@[a-f0-9]+$":
-+ type: object
-+
-+ $ref: common.yaml#
-+
-+ properties:
-+ reg:
-+ maxItems: 1
-+ description: LED pin number
-+
-+ active-low:
-+ type: boolean
-+ description: Makes LED active low.
-+
-+ required:
-+ - reg
-+
-+ unevaluatedProperties: false
-+
-+required:
-+ - reg
-+ - "#address-cells"
-+ - "#size-cells"
-+
-+additionalProperties: false
-+
-+examples:
-+ - |
-+ #include <dt-bindings/leds/common.h>
-+
-+ leds@ff800800 {
-+ compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
-+ reg = <0xff800800 0xdc>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ led@0 {
-+ reg = <0x0>;
-+ function = LED_FUNCTION_POWER;
-+ color = <LED_COLOR_ID_GREEN>;
-+ default-state = "on";
-+ };
-+
-+ led@3 {
-+ reg = <0x3>;
-+ function = LED_FUNCTION_STATUS;
-+ color = <LED_COLOR_ID_GREEN>;
-+ active-low;
-+ };
-+ };
+++ /dev/null
-From a0ba692072d89075d0a75c7ad9df31f2c1ee9a1c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 27 Dec 2021 15:59:05 +0100
-Subject: [PATCH] leds: bcm63138: add support for BCM63138 controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a new controller first introduced in BCM63138 SoC. Later it was
-also used in BCM4908, some BCM68xx and some BCM63xxx SoCs.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/blink/Kconfig | 12 ++
- drivers/leds/blink/Makefile | 1 +
- drivers/leds/blink/leds-bcm63138.c | 308 +++++++++++++++++++++++++++++
- 3 files changed, 321 insertions(+)
- create mode 100644 drivers/leds/blink/leds-bcm63138.c
-
---- /dev/null
-+++ b/drivers/leds/blink/Kconfig
-@@ -0,0 +1,11 @@
-+config LEDS_BCM63138
-+ tristate "LED Support for Broadcom BCM63138 SoC"
-+ depends on LEDS_CLASS
-+ depends on ARCH_BCM4908 || ARCH_BCM_5301X || BCM63XX || COMPILE_TEST
-+ depends on HAS_IOMEM
-+ depends on OF
-+ default ARCH_BCM4908
-+ help
-+ This option enables support for LED controller that is part of
-+ BCM63138 SoC. The same hardware block is known to be also used
-+ in BCM4908, BCM6848, BCM6858, BCM63148, BCM63381 and BCM68360.
---- /dev/null
-+++ b/drivers/leds/blink/Makefile
-@@ -0,0 +1,2 @@
-+# SPDX-License-Identifier: GPL-2.0
-+obj-$(CONFIG_LEDS_BCM63138) += leds-bcm63138.o
---- /dev/null
-+++ b/drivers/leds/blink/leds-bcm63138.c
-@@ -0,0 +1,308 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/pinctrl/consumer.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+
-+#define BCM63138_MAX_LEDS 32
-+#define BCM63138_MAX_BRIGHTNESS 9
-+
-+#define BCM63138_LED_BITS 4 /* how many bits control a single LED */
-+#define BCM63138_LED_MASK ((1 << BCM63138_LED_BITS) - 1) /* 0xf */
-+#define BCM63138_LEDS_PER_REG (32 / BCM63138_LED_BITS) /* 8 */
-+
-+#define BCM63138_GLB_CTRL 0x00
-+#define BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL 0x00000002
-+#define BCM63138_GLB_CTRL_SERIAL_LED_EN_POL 0x00000008
-+#define BCM63138_MASK 0x04
-+#define BCM63138_HW_LED_EN 0x08
-+#define BCM63138_SERIAL_LED_SHIFT_SEL 0x0c
-+#define BCM63138_FLASH_RATE_CTRL1 0x10
-+#define BCM63138_FLASH_RATE_CTRL2 0x14
-+#define BCM63138_FLASH_RATE_CTRL3 0x18
-+#define BCM63138_FLASH_RATE_CTRL4 0x1c
-+#define BCM63138_BRIGHT_CTRL1 0x20
-+#define BCM63138_BRIGHT_CTRL2 0x24
-+#define BCM63138_BRIGHT_CTRL3 0x28
-+#define BCM63138_BRIGHT_CTRL4 0x2c
-+#define BCM63138_POWER_LED_CFG 0x30
-+#define BCM63138_HW_POLARITY 0xb4
-+#define BCM63138_SW_DATA 0xb8
-+#define BCM63138_SW_POLARITY 0xbc
-+#define BCM63138_PARALLEL_LED_POLARITY 0xc0
-+#define BCM63138_SERIAL_LED_POLARITY 0xc4
-+#define BCM63138_HW_LED_STATUS 0xc8
-+#define BCM63138_FLASH_CTRL_STATUS 0xcc
-+#define BCM63138_FLASH_BRT_CTRL 0xd0
-+#define BCM63138_FLASH_P_LED_OUT_STATUS 0xd4
-+#define BCM63138_FLASH_S_LED_OUT_STATUS 0xd8
-+
-+struct bcm63138_leds {
-+ struct device *dev;
-+ void __iomem *base;
-+ spinlock_t lock;
-+};
-+
-+struct bcm63138_led {
-+ struct bcm63138_leds *leds;
-+ struct led_classdev cdev;
-+ u32 pin;
-+ bool active_low;
-+};
-+
-+/*
-+ * I/O access
-+ */
-+
-+static void bcm63138_leds_write(struct bcm63138_leds *leds, unsigned int reg,
-+ u32 data)
-+{
-+ writel(data, leds->base + reg);
-+}
-+
-+static unsigned long bcm63138_leds_read(struct bcm63138_leds *leds,
-+ unsigned int reg)
-+{
-+ return readl(leds->base + reg);
-+}
-+
-+static void bcm63138_leds_update_bits(struct bcm63138_leds *leds,
-+ unsigned int reg, u32 mask, u32 val)
-+{
-+ WARN_ON(val & ~mask);
-+
-+ bcm63138_leds_write(leds, reg, (bcm63138_leds_read(leds, reg) & ~mask) | (val & mask));
-+}
-+
-+/*
-+ * Helpers
-+ */
-+
-+static void bcm63138_leds_set_flash_rate(struct bcm63138_leds *leds,
-+ struct bcm63138_led *led,
-+ u8 value)
-+{
-+ int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
-+ int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
-+
-+ bcm63138_leds_update_bits(leds, BCM63138_FLASH_RATE_CTRL1 + reg_offset,
-+ BCM63138_LED_MASK << shift, value << shift);
-+}
-+
-+static void bcm63138_leds_set_bright(struct bcm63138_leds *leds,
-+ struct bcm63138_led *led,
-+ u8 value)
-+{
-+ int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
-+ int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
-+
-+ bcm63138_leds_update_bits(leds, BCM63138_BRIGHT_CTRL1 + reg_offset,
-+ BCM63138_LED_MASK << shift, value << shift);
-+}
-+
-+static void bcm63138_leds_enable_led(struct bcm63138_leds *leds,
-+ struct bcm63138_led *led,
-+ enum led_brightness value)
-+{
-+ u32 bit = BIT(led->pin);
-+
-+ bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit,
-+ value == LED_OFF ? 0 : bit);
-+}
-+
-+/*
-+ * API callbacks
-+ */
-+
-+static void bcm63138_leds_brightness_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
-+ struct bcm63138_leds *leds = led->leds;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&leds->lock, flags);
-+
-+ bcm63138_leds_enable_led(leds, led, value);
-+ if (!value)
-+ bcm63138_leds_set_flash_rate(leds, led, 0);
-+ else
-+ bcm63138_leds_set_bright(leds, led, value);
-+
-+ spin_unlock_irqrestore(&leds->lock, flags);
-+}
-+
-+static int bcm63138_leds_blink_set(struct led_classdev *led_cdev,
-+ unsigned long *delay_on,
-+ unsigned long *delay_off)
-+{
-+ struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
-+ struct bcm63138_leds *leds = led->leds;
-+ unsigned long flags;
-+ u8 value;
-+
-+ if (!*delay_on && !*delay_off) {
-+ *delay_on = 640;
-+ *delay_off = 640;
-+ }
-+
-+ if (*delay_on != *delay_off) {
-+ dev_dbg(led_cdev->dev, "Blinking at unequal delays is not supported\n");
-+ return -EINVAL;
-+ }
-+
-+ switch (*delay_on) {
-+ case 1152 ... 1408: /* 1280 ms ± 10% */
-+ value = 0x7;
-+ break;
-+ case 576 ... 704: /* 640 ms ± 10% */
-+ value = 0x6;
-+ break;
-+ case 288 ... 352: /* 320 ms ± 10% */
-+ value = 0x5;
-+ break;
-+ case 126 ... 154: /* 140 ms ± 10% */
-+ value = 0x4;
-+ break;
-+ case 59 ... 72: /* 65 ms ± 10% */
-+ value = 0x3;
-+ break;
-+ default:
-+ dev_dbg(led_cdev->dev, "Blinking delay value %lu is unsupported\n",
-+ *delay_on);
-+ return -EINVAL;
-+ }
-+
-+ spin_lock_irqsave(&leds->lock, flags);
-+
-+ bcm63138_leds_enable_led(leds, led, BCM63138_MAX_BRIGHTNESS);
-+ bcm63138_leds_set_flash_rate(leds, led, value);
-+
-+ spin_unlock_irqrestore(&leds->lock, flags);
-+
-+ return 0;
-+}
-+
-+/*
-+ * LED driver
-+ */
-+
-+static void bcm63138_leds_create_led(struct bcm63138_leds *leds,
-+ struct device_node *np)
-+{
-+ struct led_init_data init_data = {
-+ .fwnode = of_fwnode_handle(np),
-+ };
-+ struct device *dev = leds->dev;
-+ struct bcm63138_led *led;
-+ struct pinctrl *pinctrl;
-+ u32 bit;
-+ int err;
-+
-+ led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
-+ if (!led) {
-+ dev_err(dev, "Failed to alloc LED\n");
-+ return;
-+ }
-+
-+ led->leds = leds;
-+
-+ if (of_property_read_u32(np, "reg", &led->pin)) {
-+ dev_err(dev, "Missing \"reg\" property in %pOF\n", np);
-+ goto err_free;
-+ }
-+
-+ if (led->pin >= BCM63138_MAX_LEDS) {
-+ dev_err(dev, "Invalid \"reg\" value %d\n", led->pin);
-+ goto err_free;
-+ }
-+
-+ led->active_low = of_property_read_bool(np, "active-low");
-+
-+ led->cdev.max_brightness = BCM63138_MAX_BRIGHTNESS;
-+ led->cdev.brightness_set = bcm63138_leds_brightness_set;
-+ led->cdev.blink_set = bcm63138_leds_blink_set;
-+
-+ err = devm_led_classdev_register_ext(dev, &led->cdev, &init_data);
-+ if (err) {
-+ dev_err(dev, "Failed to register LED %pOF: %d\n", np, err);
-+ goto err_free;
-+ }
-+
-+ pinctrl = devm_pinctrl_get_select_default(led->cdev.dev);
-+ if (IS_ERR(pinctrl) && PTR_ERR(pinctrl) != -ENODEV) {
-+ dev_warn(led->cdev.dev, "Failed to select %pOF pinctrl: %ld\n",
-+ np, PTR_ERR(pinctrl));
-+ }
-+
-+ bit = BIT(led->pin);
-+ bcm63138_leds_update_bits(leds, BCM63138_PARALLEL_LED_POLARITY, bit,
-+ led->active_low ? 0 : bit);
-+ bcm63138_leds_update_bits(leds, BCM63138_HW_LED_EN, bit, 0);
-+ bcm63138_leds_set_flash_rate(leds, led, 0);
-+ bcm63138_leds_enable_led(leds, led, led->cdev.brightness);
-+
-+ return;
-+
-+err_free:
-+ devm_kfree(dev, led);
-+}
-+
-+static int bcm63138_leds_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = dev_of_node(&pdev->dev);
-+ struct device *dev = &pdev->dev;
-+ struct bcm63138_leds *leds;
-+ struct device_node *child;
-+
-+ leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
-+ if (!leds)
-+ return -ENOMEM;
-+
-+ leds->dev = dev;
-+
-+ leds->base = devm_platform_ioremap_resource(pdev, 0);
-+ if (IS_ERR(leds->base))
-+ return PTR_ERR(leds->base);
-+
-+ spin_lock_init(&leds->lock);
-+
-+ bcm63138_leds_write(leds, BCM63138_GLB_CTRL,
-+ BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL |
-+ BCM63138_GLB_CTRL_SERIAL_LED_EN_POL);
-+ bcm63138_leds_write(leds, BCM63138_HW_LED_EN, 0);
-+ bcm63138_leds_write(leds, BCM63138_SERIAL_LED_POLARITY, 0);
-+ bcm63138_leds_write(leds, BCM63138_PARALLEL_LED_POLARITY, 0);
-+
-+ for_each_available_child_of_node(np, child) {
-+ bcm63138_leds_create_led(leds, child);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id bcm63138_leds_of_match_table[] = {
-+ { .compatible = "brcm,bcm63138-leds", },
-+ { },
-+};
-+
-+static struct platform_driver bcm63138_leds_driver = {
-+ .probe = bcm63138_leds_probe,
-+ .driver = {
-+ .name = "leds-bcm63xxx",
-+ .of_match_table = bcm63138_leds_of_match_table,
-+ },
-+};
-+
-+module_platform_driver(bcm63138_leds_driver);
-+
-+MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_LICENSE("GPL");
-+MODULE_DEVICE_TABLE(of, bcm63138_leds_of_match_table);
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -929,6 +929,8 @@ config LEDS_ACER_A500
- This option enables support for the Power Button LED of
- Acer Iconia Tab A500.
-
-+source "drivers/leds/blink/Kconfig"
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
-
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -105,3 +105,6 @@ obj-$(CONFIG_LEDS_USER) += uleds.o
-
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGERS) += trigger/
-+
-+# LED Blink
-+obj-y += blink/
--- /dev/null
+From 13344f8ce8a0d98aa7f5d69ce3b47393c73a343b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Mon, 27 Dec 2021 15:59:04 +0100
+Subject: [PATCH] dt-bindings: leds: add Broadcom's BCM63138 controller
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Broadcom used 2 LEDs hardware blocks for their BCM63xx SoCs:
+1. Older one (BCM6318, BCM6328, BCM6362, BCM63268, BCM6838)
+2. Newer one (BCM6848, BCM6858, BCM63138, BCM63148, BCM63381, BCM68360)
+
+The newer one was also later also used on BCM4908 SoC.
+
+Old block is already documented in the leds-bcm6328.yaml. This binding
+documents the new one which uses different registers & programming. It's
+first used in BCM63138 thus the binding name.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Reviewed-by: Rob Herring <robh@kernel.org>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Pavel Machek <pavel@ucw.cz>
+---
+ .../bindings/leds/leds-bcm63138.yaml | 95 +++++++++++++++++++
+ 1 file changed, 95 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
+@@ -0,0 +1,95 @@
++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Broadcom's BCM63138 LEDs controller
++
++maintainers:
++ - Rafał Miłecki <rafal@milecki.pl>
++
++description: |
++ This LEDs controller was first used on BCM63138 and later reused on BCM4908,
++ BCM6848, BCM6858, BCM63138, BCM63148, BCM63381 and BCM68360 SoCs.
++
++ It supports up to 32 LEDs that can be connected parallelly or serially. It
++ also includes limited support for hardware blinking.
++
++ Binding serially connected LEDs isn't documented yet.
++
++properties:
++ compatible:
++ oneOf:
++ - items:
++ - enum:
++ - brcm,bcm4908-leds
++ - brcm,bcm6848-leds
++ - brcm,bcm6858-leds
++ - brcm,bcm63148-leds
++ - brcm,bcm63381-leds
++ - brcm,bcm68360-leds
++ - const: brcm,bcm63138-leds
++ - const: brcm,bcm63138-leds
++
++ reg:
++ maxItems: 1
++
++ "#address-cells":
++ const: 1
++
++ "#size-cells":
++ const: 0
++
++patternProperties:
++ "^led@[a-f0-9]+$":
++ type: object
++
++ $ref: common.yaml#
++
++ properties:
++ reg:
++ maxItems: 1
++ description: LED pin number
++
++ active-low:
++ type: boolean
++ description: Makes LED active low.
++
++ required:
++ - reg
++
++ unevaluatedProperties: false
++
++required:
++ - reg
++ - "#address-cells"
++ - "#size-cells"
++
++additionalProperties: false
++
++examples:
++ - |
++ #include <dt-bindings/leds/common.h>
++
++ leds@ff800800 {
++ compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
++ reg = <0xff800800 0xdc>;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ led@0 {
++ reg = <0x0>;
++ function = LED_FUNCTION_POWER;
++ color = <LED_COLOR_ID_GREEN>;
++ default-state = "on";
++ };
++
++ led@3 {
++ reg = <0x3>;
++ function = LED_FUNCTION_STATUS;
++ color = <LED_COLOR_ID_GREEN>;
++ active-low;
++ };
++ };
--- /dev/null
+From a0ba692072d89075d0a75c7ad9df31f2c1ee9a1c Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Mon, 27 Dec 2021 15:59:05 +0100
+Subject: [PATCH] leds: bcm63138: add support for BCM63138 controller
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's a new controller first introduced in BCM63138 SoC. Later it was
+also used in BCM4908, some BCM68xx and some BCM63xxx SoCs.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Pavel Machek <pavel@ucw.cz>
+---
+ drivers/leds/blink/Kconfig | 12 ++
+ drivers/leds/blink/Makefile | 1 +
+ drivers/leds/blink/leds-bcm63138.c | 308 +++++++++++++++++++++++++++++
+ 3 files changed, 321 insertions(+)
+ create mode 100644 drivers/leds/blink/leds-bcm63138.c
+
+--- /dev/null
++++ b/drivers/leds/blink/Kconfig
+@@ -0,0 +1,11 @@
++config LEDS_BCM63138
++ tristate "LED Support for Broadcom BCM63138 SoC"
++ depends on LEDS_CLASS
++ depends on ARCH_BCM4908 || ARCH_BCM_5301X || BCM63XX || COMPILE_TEST
++ depends on HAS_IOMEM
++ depends on OF
++ default ARCH_BCM4908
++ help
++ This option enables support for LED controller that is part of
++ BCM63138 SoC. The same hardware block is known to be also used
++ in BCM4908, BCM6848, BCM6858, BCM63148, BCM63381 and BCM68360.
+--- /dev/null
++++ b/drivers/leds/blink/Makefile
+@@ -0,0 +1,2 @@
++# SPDX-License-Identifier: GPL-2.0
++obj-$(CONFIG_LEDS_BCM63138) += leds-bcm63138.o
+--- /dev/null
++++ b/drivers/leds/blink/leds-bcm63138.c
+@@ -0,0 +1,308 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/*
++ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
++ */
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/leds.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/pinctrl/consumer.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++
++#define BCM63138_MAX_LEDS 32
++#define BCM63138_MAX_BRIGHTNESS 9
++
++#define BCM63138_LED_BITS 4 /* how many bits control a single LED */
++#define BCM63138_LED_MASK ((1 << BCM63138_LED_BITS) - 1) /* 0xf */
++#define BCM63138_LEDS_PER_REG (32 / BCM63138_LED_BITS) /* 8 */
++
++#define BCM63138_GLB_CTRL 0x00
++#define BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL 0x00000002
++#define BCM63138_GLB_CTRL_SERIAL_LED_EN_POL 0x00000008
++#define BCM63138_MASK 0x04
++#define BCM63138_HW_LED_EN 0x08
++#define BCM63138_SERIAL_LED_SHIFT_SEL 0x0c
++#define BCM63138_FLASH_RATE_CTRL1 0x10
++#define BCM63138_FLASH_RATE_CTRL2 0x14
++#define BCM63138_FLASH_RATE_CTRL3 0x18
++#define BCM63138_FLASH_RATE_CTRL4 0x1c
++#define BCM63138_BRIGHT_CTRL1 0x20
++#define BCM63138_BRIGHT_CTRL2 0x24
++#define BCM63138_BRIGHT_CTRL3 0x28
++#define BCM63138_BRIGHT_CTRL4 0x2c
++#define BCM63138_POWER_LED_CFG 0x30
++#define BCM63138_HW_POLARITY 0xb4
++#define BCM63138_SW_DATA 0xb8
++#define BCM63138_SW_POLARITY 0xbc
++#define BCM63138_PARALLEL_LED_POLARITY 0xc0
++#define BCM63138_SERIAL_LED_POLARITY 0xc4
++#define BCM63138_HW_LED_STATUS 0xc8
++#define BCM63138_FLASH_CTRL_STATUS 0xcc
++#define BCM63138_FLASH_BRT_CTRL 0xd0
++#define BCM63138_FLASH_P_LED_OUT_STATUS 0xd4
++#define BCM63138_FLASH_S_LED_OUT_STATUS 0xd8
++
++struct bcm63138_leds {
++ struct device *dev;
++ void __iomem *base;
++ spinlock_t lock;
++};
++
++struct bcm63138_led {
++ struct bcm63138_leds *leds;
++ struct led_classdev cdev;
++ u32 pin;
++ bool active_low;
++};
++
++/*
++ * I/O access
++ */
++
++static void bcm63138_leds_write(struct bcm63138_leds *leds, unsigned int reg,
++ u32 data)
++{
++ writel(data, leds->base + reg);
++}
++
++static unsigned long bcm63138_leds_read(struct bcm63138_leds *leds,
++ unsigned int reg)
++{
++ return readl(leds->base + reg);
++}
++
++static void bcm63138_leds_update_bits(struct bcm63138_leds *leds,
++ unsigned int reg, u32 mask, u32 val)
++{
++ WARN_ON(val & ~mask);
++
++ bcm63138_leds_write(leds, reg, (bcm63138_leds_read(leds, reg) & ~mask) | (val & mask));
++}
++
++/*
++ * Helpers
++ */
++
++static void bcm63138_leds_set_flash_rate(struct bcm63138_leds *leds,
++ struct bcm63138_led *led,
++ u8 value)
++{
++ int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
++ int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
++
++ bcm63138_leds_update_bits(leds, BCM63138_FLASH_RATE_CTRL1 + reg_offset,
++ BCM63138_LED_MASK << shift, value << shift);
++}
++
++static void bcm63138_leds_set_bright(struct bcm63138_leds *leds,
++ struct bcm63138_led *led,
++ u8 value)
++{
++ int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
++ int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
++
++ bcm63138_leds_update_bits(leds, BCM63138_BRIGHT_CTRL1 + reg_offset,
++ BCM63138_LED_MASK << shift, value << shift);
++}
++
++static void bcm63138_leds_enable_led(struct bcm63138_leds *leds,
++ struct bcm63138_led *led,
++ enum led_brightness value)
++{
++ u32 bit = BIT(led->pin);
++
++ bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit,
++ value == LED_OFF ? 0 : bit);
++}
++
++/*
++ * API callbacks
++ */
++
++static void bcm63138_leds_brightness_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
++{
++ struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
++ struct bcm63138_leds *leds = led->leds;
++ unsigned long flags;
++
++ spin_lock_irqsave(&leds->lock, flags);
++
++ bcm63138_leds_enable_led(leds, led, value);
++ if (!value)
++ bcm63138_leds_set_flash_rate(leds, led, 0);
++ else
++ bcm63138_leds_set_bright(leds, led, value);
++
++ spin_unlock_irqrestore(&leds->lock, flags);
++}
++
++static int bcm63138_leds_blink_set(struct led_classdev *led_cdev,
++ unsigned long *delay_on,
++ unsigned long *delay_off)
++{
++ struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
++ struct bcm63138_leds *leds = led->leds;
++ unsigned long flags;
++ u8 value;
++
++ if (!*delay_on && !*delay_off) {
++ *delay_on = 640;
++ *delay_off = 640;
++ }
++
++ if (*delay_on != *delay_off) {
++ dev_dbg(led_cdev->dev, "Blinking at unequal delays is not supported\n");
++ return -EINVAL;
++ }
++
++ switch (*delay_on) {
++ case 1152 ... 1408: /* 1280 ms ± 10% */
++ value = 0x7;
++ break;
++ case 576 ... 704: /* 640 ms ± 10% */
++ value = 0x6;
++ break;
++ case 288 ... 352: /* 320 ms ± 10% */
++ value = 0x5;
++ break;
++ case 126 ... 154: /* 140 ms ± 10% */
++ value = 0x4;
++ break;
++ case 59 ... 72: /* 65 ms ± 10% */
++ value = 0x3;
++ break;
++ default:
++ dev_dbg(led_cdev->dev, "Blinking delay value %lu is unsupported\n",
++ *delay_on);
++ return -EINVAL;
++ }
++
++ spin_lock_irqsave(&leds->lock, flags);
++
++ bcm63138_leds_enable_led(leds, led, BCM63138_MAX_BRIGHTNESS);
++ bcm63138_leds_set_flash_rate(leds, led, value);
++
++ spin_unlock_irqrestore(&leds->lock, flags);
++
++ return 0;
++}
++
++/*
++ * LED driver
++ */
++
++static void bcm63138_leds_create_led(struct bcm63138_leds *leds,
++ struct device_node *np)
++{
++ struct led_init_data init_data = {
++ .fwnode = of_fwnode_handle(np),
++ };
++ struct device *dev = leds->dev;
++ struct bcm63138_led *led;
++ struct pinctrl *pinctrl;
++ u32 bit;
++ int err;
++
++ led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
++ if (!led) {
++ dev_err(dev, "Failed to alloc LED\n");
++ return;
++ }
++
++ led->leds = leds;
++
++ if (of_property_read_u32(np, "reg", &led->pin)) {
++ dev_err(dev, "Missing \"reg\" property in %pOF\n", np);
++ goto err_free;
++ }
++
++ if (led->pin >= BCM63138_MAX_LEDS) {
++ dev_err(dev, "Invalid \"reg\" value %d\n", led->pin);
++ goto err_free;
++ }
++
++ led->active_low = of_property_read_bool(np, "active-low");
++
++ led->cdev.max_brightness = BCM63138_MAX_BRIGHTNESS;
++ led->cdev.brightness_set = bcm63138_leds_brightness_set;
++ led->cdev.blink_set = bcm63138_leds_blink_set;
++
++ err = devm_led_classdev_register_ext(dev, &led->cdev, &init_data);
++ if (err) {
++ dev_err(dev, "Failed to register LED %pOF: %d\n", np, err);
++ goto err_free;
++ }
++
++ pinctrl = devm_pinctrl_get_select_default(led->cdev.dev);
++ if (IS_ERR(pinctrl) && PTR_ERR(pinctrl) != -ENODEV) {
++ dev_warn(led->cdev.dev, "Failed to select %pOF pinctrl: %ld\n",
++ np, PTR_ERR(pinctrl));
++ }
++
++ bit = BIT(led->pin);
++ bcm63138_leds_update_bits(leds, BCM63138_PARALLEL_LED_POLARITY, bit,
++ led->active_low ? 0 : bit);
++ bcm63138_leds_update_bits(leds, BCM63138_HW_LED_EN, bit, 0);
++ bcm63138_leds_set_flash_rate(leds, led, 0);
++ bcm63138_leds_enable_led(leds, led, led->cdev.brightness);
++
++ return;
++
++err_free:
++ devm_kfree(dev, led);
++}
++
++static int bcm63138_leds_probe(struct platform_device *pdev)
++{
++ struct device_node *np = dev_of_node(&pdev->dev);
++ struct device *dev = &pdev->dev;
++ struct bcm63138_leds *leds;
++ struct device_node *child;
++
++ leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
++ if (!leds)
++ return -ENOMEM;
++
++ leds->dev = dev;
++
++ leds->base = devm_platform_ioremap_resource(pdev, 0);
++ if (IS_ERR(leds->base))
++ return PTR_ERR(leds->base);
++
++ spin_lock_init(&leds->lock);
++
++ bcm63138_leds_write(leds, BCM63138_GLB_CTRL,
++ BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL |
++ BCM63138_GLB_CTRL_SERIAL_LED_EN_POL);
++ bcm63138_leds_write(leds, BCM63138_HW_LED_EN, 0);
++ bcm63138_leds_write(leds, BCM63138_SERIAL_LED_POLARITY, 0);
++ bcm63138_leds_write(leds, BCM63138_PARALLEL_LED_POLARITY, 0);
++
++ for_each_available_child_of_node(np, child) {
++ bcm63138_leds_create_led(leds, child);
++ }
++
++ return 0;
++}
++
++static const struct of_device_id bcm63138_leds_of_match_table[] = {
++ { .compatible = "brcm,bcm63138-leds", },
++ { },
++};
++
++static struct platform_driver bcm63138_leds_driver = {
++ .probe = bcm63138_leds_probe,
++ .driver = {
++ .name = "leds-bcm63xxx",
++ .of_match_table = bcm63138_leds_of_match_table,
++ },
++};
++
++module_platform_driver(bcm63138_leds_driver);
++
++MODULE_AUTHOR("Rafał Miłecki");
++MODULE_LICENSE("GPL");
++MODULE_DEVICE_TABLE(of, bcm63138_leds_of_match_table);
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -929,6 +929,8 @@ config LEDS_ACER_A500
+ This option enables support for the Power Button LED of
+ Acer Iconia Tab A500.
+
++source "drivers/leds/blink/Kconfig"
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -105,3 +105,6 @@ obj-$(CONFIG_LEDS_USER) += uleds.o
+
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGERS) += trigger/
++
++# LED Blink
++obj-y += blink/
+++ /dev/null
-From 13b64a0c19059b38150c79d65d350ae44034c5df Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 17 Jul 2022 14:42:46 +0200
-Subject: [PATCH] dt-bindings: leds: leds-bcm63138: unify full stops in
- descriptions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Description of "reg" doesn't have full stop at the end. It makes sense
-as it's a one-sentence only. Use the same style for "active-low".
-
-Reported-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- Documentation/devicetree/bindings/leds/leds-bcm63138.yaml | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-@@ -54,7 +54,7 @@ patternProperties:
-
- active-low:
- type: boolean
-- description: Makes LED active low.
-+ description: Makes LED active low
-
- required:
- - reg
+++ /dev/null
-From bcc607cdbb1f931111196699426f0cb83bfb296a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 17 Jul 2022 14:42:47 +0200
-Subject: [PATCH] leds: add help info about BCM63138 module name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's what we do for all other LEDs drivers.
-
-Reported-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/blink/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/leds/blink/Kconfig
-+++ b/drivers/leds/blink/Kconfig
-@@ -9,3 +9,5 @@ config LEDS_BCM63138
- This option enables support for LED controller that is part of
- BCM63138 SoC. The same hardware block is known to be also used
- in BCM4908, BCM6848, BCM6858, BCM63148, BCM63381 and BCM68360.
-+
-+ If compiled as module it will be called leds-bcm63138.
+++ /dev/null
-From 92cfc71ee2ddfb499ed53e21b28bdf8739bc70bc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 17 Jul 2022 14:42:48 +0200
-Subject: [PATCH] leds: leds-bcm63138: get rid of LED_OFF
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The whole "enum led_brightness" is marked as obsolete. Replace it with a
-(non-)zero check.
-
-Reported-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/blink/leds-bcm63138.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/leds/blink/leds-bcm63138.c
-+++ b/drivers/leds/blink/leds-bcm63138.c
-@@ -113,8 +113,7 @@ static void bcm63138_leds_enable_led(str
- {
- u32 bit = BIT(led->pin);
-
-- bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit,
-- value == LED_OFF ? 0 : bit);
-+ bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit, value ? bit : 0);
- }
-
- /*
--- /dev/null
+From 13b64a0c19059b38150c79d65d350ae44034c5df Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 17 Jul 2022 14:42:46 +0200
+Subject: [PATCH] dt-bindings: leds: leds-bcm63138: unify full stops in
+ descriptions
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Description of "reg" doesn't have full stop at the end. It makes sense
+as it's a one-sentence only. Use the same style for "active-low".
+
+Reported-by: Pavel Machek <pavel@ucw.cz>
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Pavel Machek <pavel@ucw.cz>
+---
+ Documentation/devicetree/bindings/leds/leds-bcm63138.yaml | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
++++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
+@@ -54,7 +54,7 @@ patternProperties:
+
+ active-low:
+ type: boolean
+- description: Makes LED active low.
++ description: Makes LED active low
+
+ required:
+ - reg
--- /dev/null
+From bcc607cdbb1f931111196699426f0cb83bfb296a Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 17 Jul 2022 14:42:47 +0200
+Subject: [PATCH] leds: add help info about BCM63138 module name
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's what we do for all other LEDs drivers.
+
+Reported-by: Pavel Machek <pavel@ucw.cz>
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Pavel Machek <pavel@ucw.cz>
+---
+ drivers/leds/blink/Kconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/leds/blink/Kconfig
++++ b/drivers/leds/blink/Kconfig
+@@ -9,3 +9,5 @@ config LEDS_BCM63138
+ This option enables support for LED controller that is part of
+ BCM63138 SoC. The same hardware block is known to be also used
+ in BCM4908, BCM6848, BCM6858, BCM63148, BCM63381 and BCM68360.
++
++ If compiled as module it will be called leds-bcm63138.
--- /dev/null
+From 92cfc71ee2ddfb499ed53e21b28bdf8739bc70bc Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 17 Jul 2022 14:42:48 +0200
+Subject: [PATCH] leds: leds-bcm63138: get rid of LED_OFF
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The whole "enum led_brightness" is marked as obsolete. Replace it with a
+(non-)zero check.
+
+Reported-by: Pavel Machek <pavel@ucw.cz>
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Pavel Machek <pavel@ucw.cz>
+---
+ drivers/leds/blink/leds-bcm63138.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+--- a/drivers/leds/blink/leds-bcm63138.c
++++ b/drivers/leds/blink/leds-bcm63138.c
+@@ -113,8 +113,7 @@ static void bcm63138_leds_enable_led(str
+ {
+ u32 bit = BIT(led->pin);
+
+- bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit,
+- value == LED_OFF ? 0 : bit);
++ bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit, value ? bit : 0);
+ }
+
+ /*
+++ /dev/null
-From 9b78ef0c7997052e9eaa0f7a4513d546fa17358c Mon Sep 17 00:00:00 2001
-From: Mikhail Zhilkin <csharper2005@gmail.com>
-Date: Sun, 29 May 2022 11:07:14 +0000
-Subject: [PATCH] mtd: parsers: add support for Sercomm partitions
-
-This adds an MTD partition parser for the Sercomm partition table that
-is used in some Beeline, Netgear and Sercomm routers.
-
-The Sercomm partition map table contains real partition offsets, which
-may differ from device to device depending on the number and location of
-bad blocks on NAND.
-
-Original patch (proposed by NOGUCHI Hiroshi):
-Link: https://github.com/openwrt/openwrt/pull/1318#issuecomment-420607394
-
-Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
-Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220529110714.189732-1-csharper2005@gmail.com
----
- drivers/mtd/parsers/Kconfig | 9 ++
- drivers/mtd/parsers/Makefile | 1 +
- drivers/mtd/parsers/scpart.c | 248 +++++++++++++++++++++++++++++++++++
- 3 files changed, 258 insertions(+)
- create mode 100644 drivers/mtd/parsers/scpart.c
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -186,3 +186,12 @@ config MTD_QCOMSMEM_PARTS
- help
- This provides support for parsing partitions from Shared Memory (SMEM)
- for NAND and SPI flash on Qualcomm platforms.
-+
-+config MTD_SERCOMM_PARTS
-+ tristate "Sercomm partition table parser"
-+ depends on MTD && RALINK
-+ help
-+ This provides partitions table parser for devices with Sercomm
-+ partition map. This partition table contains real partition
-+ offsets, which may differ from device to device depending on the
-+ number and location of bad blocks on NAND.
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -10,6 +10,7 @@ ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)
- obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
-+obj-$(CONFIG_MTD_SERCOMM_PARTS) += scpart.o
- obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_QCOMSMEM_PARTS) += qcomsmempart.o
---- /dev/null
-+++ b/drivers/mtd/parsers/scpart.c
-@@ -0,0 +1,248 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * drivers/mtd/scpart.c: Sercomm Partition Parser
-+ *
-+ * Copyright (C) 2018 NOGUCHI Hiroshi
-+ * Copyright (C) 2022 Mikhail Zhilkin
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/module.h>
-+
-+#define MOD_NAME "scpart"
-+
-+#ifdef pr_fmt
-+#undef pr_fmt
-+#endif
-+
-+#define pr_fmt(fmt) MOD_NAME ": " fmt
-+
-+#define ID_ALREADY_FOUND 0xffffffffUL
-+
-+#define MAP_OFFS_IN_BLK 0x800
-+#define MAP_MIRROR_NUM 2
-+
-+static const char sc_part_magic[] = {
-+ 'S', 'C', 'F', 'L', 'M', 'A', 'P', 'O', 'K', '\0',
-+};
-+#define PART_MAGIC_LEN sizeof(sc_part_magic)
-+
-+/* assumes that all fields are set by CPU native endian */
-+struct sc_part_desc {
-+ uint32_t part_id;
-+ uint32_t part_offs;
-+ uint32_t part_bytes;
-+};
-+
-+static uint32_t scpart_desc_is_valid(struct sc_part_desc *pdesc)
-+{
-+ return ((pdesc->part_id != 0xffffffffUL) &&
-+ (pdesc->part_offs != 0xffffffffUL) &&
-+ (pdesc->part_bytes != 0xffffffffUL));
-+}
-+
-+static int scpart_scan_partmap(struct mtd_info *master, loff_t partmap_offs,
-+ struct sc_part_desc **ppdesc)
-+{
-+ int cnt = 0;
-+ int res = 0;
-+ int res2;
-+ loff_t offs;
-+ size_t retlen;
-+ struct sc_part_desc *pdesc = NULL;
-+ struct sc_part_desc *tmpdesc;
-+ uint8_t *buf;
-+
-+ buf = kzalloc(master->erasesize, GFP_KERNEL);
-+ if (!buf) {
-+ res = -ENOMEM;
-+ goto out;
-+ }
-+
-+ res2 = mtd_read(master, partmap_offs, master->erasesize, &retlen, buf);
-+ if (res2 || retlen != master->erasesize) {
-+ res = -EIO;
-+ goto free;
-+ }
-+
-+ for (offs = MAP_OFFS_IN_BLK;
-+ offs < master->erasesize - sizeof(*tmpdesc);
-+ offs += sizeof(*tmpdesc)) {
-+ tmpdesc = (struct sc_part_desc *)&buf[offs];
-+ if (!scpart_desc_is_valid(tmpdesc))
-+ break;
-+ cnt++;
-+ }
-+
-+ if (cnt > 0) {
-+ int bytes = cnt * sizeof(*pdesc);
-+
-+ pdesc = kcalloc(cnt, sizeof(*pdesc), GFP_KERNEL);
-+ if (!pdesc) {
-+ res = -ENOMEM;
-+ goto free;
-+ }
-+ memcpy(pdesc, &(buf[MAP_OFFS_IN_BLK]), bytes);
-+
-+ *ppdesc = pdesc;
-+ res = cnt;
-+ }
-+
-+free:
-+ kfree(buf);
-+
-+out:
-+ return res;
-+}
-+
-+static int scpart_find_partmap(struct mtd_info *master,
-+ struct sc_part_desc **ppdesc)
-+{
-+ int magic_found = 0;
-+ int res = 0;
-+ int res2;
-+ loff_t offs = 0;
-+ size_t retlen;
-+ uint8_t rdbuf[PART_MAGIC_LEN];
-+
-+ while ((magic_found < MAP_MIRROR_NUM) &&
-+ (offs < master->size) &&
-+ !mtd_block_isbad(master, offs)) {
-+ res2 = mtd_read(master, offs, PART_MAGIC_LEN, &retlen, rdbuf);
-+ if (res2 || retlen != PART_MAGIC_LEN) {
-+ res = -EIO;
-+ goto out;
-+ }
-+ if (!memcmp(rdbuf, sc_part_magic, PART_MAGIC_LEN)) {
-+ pr_debug("Signature found at 0x%llx\n", offs);
-+ magic_found++;
-+ res = scpart_scan_partmap(master, offs, ppdesc);
-+ if (res > 0)
-+ goto out;
-+ }
-+ offs += master->erasesize;
-+ }
-+
-+out:
-+ if (res > 0)
-+ pr_info("Valid 'SC PART MAP' (%d partitions) found at 0x%llx\n", res, offs);
-+ else
-+ pr_info("No valid 'SC PART MAP' was found\n");
-+
-+ return res;
-+}
-+
-+static int scpart_parse(struct mtd_info *master,
-+ const struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data)
-+{
-+ const char *partname;
-+ int n;
-+ int nr_scparts;
-+ int nr_parts = 0;
-+ int res = 0;
-+ struct sc_part_desc *scpart_map = NULL;
-+ struct mtd_partition *parts = NULL;
-+ struct device_node *mtd_node;
-+ struct device_node *ofpart_node;
-+ struct device_node *pp;
-+
-+ mtd_node = mtd_get_of_node(master);
-+ if (!mtd_node) {
-+ res = -ENOENT;
-+ goto out;
-+ }
-+
-+ ofpart_node = of_get_child_by_name(mtd_node, "partitions");
-+ if (!ofpart_node) {
-+ pr_info("%s: 'partitions' subnode not found on %pOF.\n",
-+ master->name, mtd_node);
-+ res = -ENOENT;
-+ goto out;
-+ }
-+
-+ nr_scparts = scpart_find_partmap(master, &scpart_map);
-+ if (nr_scparts <= 0) {
-+ pr_info("No any partitions was found in 'SC PART MAP'.\n");
-+ res = -ENOENT;
-+ goto free;
-+ }
-+
-+ parts = kcalloc(of_get_child_count(ofpart_node), sizeof(*parts),
-+ GFP_KERNEL);
-+ if (!parts) {
-+ res = -ENOMEM;
-+ goto free;
-+ }
-+
-+ for_each_child_of_node(ofpart_node, pp) {
-+ u32 scpart_id;
-+
-+ if (of_property_read_u32(pp, "sercomm,scpart-id", &scpart_id))
-+ continue;
-+
-+ for (n = 0 ; n < nr_scparts ; n++)
-+ if ((scpart_map[n].part_id != ID_ALREADY_FOUND) &&
-+ (scpart_id == scpart_map[n].part_id))
-+ break;
-+ if (n >= nr_scparts)
-+ /* not match */
-+ continue;
-+
-+ /* add the partition found in OF into MTD partition array */
-+ parts[nr_parts].offset = scpart_map[n].part_offs;
-+ parts[nr_parts].size = scpart_map[n].part_bytes;
-+ parts[nr_parts].of_node = pp;
-+
-+ if (!of_property_read_string(pp, "label", &partname))
-+ parts[nr_parts].name = partname;
-+ if (of_property_read_bool(pp, "read-only"))
-+ parts[nr_parts].mask_flags |= MTD_WRITEABLE;
-+ if (of_property_read_bool(pp, "lock"))
-+ parts[nr_parts].mask_flags |= MTD_POWERUP_LOCK;
-+
-+ /* mark as 'done' */
-+ scpart_map[n].part_id = ID_ALREADY_FOUND;
-+
-+ nr_parts++;
-+ }
-+
-+ if (nr_parts > 0) {
-+ *pparts = parts;
-+ res = nr_parts;
-+ } else
-+ pr_info("No partition in OF matches partition ID with 'SC PART MAP'.\n");
-+
-+ of_node_put(pp);
-+
-+free:
-+ kfree(scpart_map);
-+ if (res <= 0)
-+ kfree(parts);
-+
-+out:
-+ return res;
-+}
-+
-+static const struct of_device_id scpart_parser_of_match_table[] = {
-+ { .compatible = "sercomm,sc-partitions" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, scpart_parser_of_match_table);
-+
-+static struct mtd_part_parser scpart_parser = {
-+ .parse_fn = scpart_parse,
-+ .name = "scpart",
-+ .of_match_table = scpart_parser_of_match_table,
-+};
-+module_mtd_part_parser(scpart_parser);
-+
-+/* mtd parsers will request the module by parser name */
-+MODULE_ALIAS("scpart");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("NOGUCHI Hiroshi <drvlabo@gmail.com>");
-+MODULE_AUTHOR("Mikhail Zhilkin <csharper2005@gmail.com>");
-+MODULE_DESCRIPTION("Sercomm partition parser");
--- /dev/null
+From 9b78ef0c7997052e9eaa0f7a4513d546fa17358c Mon Sep 17 00:00:00 2001
+From: Mikhail Zhilkin <csharper2005@gmail.com>
+Date: Sun, 29 May 2022 11:07:14 +0000
+Subject: [PATCH] mtd: parsers: add support for Sercomm partitions
+
+This adds an MTD partition parser for the Sercomm partition table that
+is used in some Beeline, Netgear and Sercomm routers.
+
+The Sercomm partition map table contains real partition offsets, which
+may differ from device to device depending on the number and location of
+bad blocks on NAND.
+
+Original patch (proposed by NOGUCHI Hiroshi):
+Link: https://github.com/openwrt/openwrt/pull/1318#issuecomment-420607394
+
+Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
+Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Link: https://lore.kernel.org/linux-mtd/20220529110714.189732-1-csharper2005@gmail.com
+---
+ drivers/mtd/parsers/Kconfig | 9 ++
+ drivers/mtd/parsers/Makefile | 1 +
+ drivers/mtd/parsers/scpart.c | 248 +++++++++++++++++++++++++++++++++++
+ 3 files changed, 258 insertions(+)
+ create mode 100644 drivers/mtd/parsers/scpart.c
+
+--- a/drivers/mtd/parsers/Kconfig
++++ b/drivers/mtd/parsers/Kconfig
+@@ -186,3 +186,12 @@ config MTD_QCOMSMEM_PARTS
+ help
+ This provides support for parsing partitions from Shared Memory (SMEM)
+ for NAND and SPI flash on Qualcomm platforms.
++
++config MTD_SERCOMM_PARTS
++ tristate "Sercomm partition table parser"
++ depends on MTD && RALINK
++ help
++ This provides partitions table parser for devices with Sercomm
++ partition map. This partition table contains real partition
++ offsets, which may differ from device to device depending on the
++ number and location of bad blocks on NAND.
+--- a/drivers/mtd/parsers/Makefile
++++ b/drivers/mtd/parsers/Makefile
+@@ -10,6 +10,7 @@ ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)
+ obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o
+ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+ obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
++obj-$(CONFIG_MTD_SERCOMM_PARTS) += scpart.o
+ obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
+ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+ obj-$(CONFIG_MTD_QCOMSMEM_PARTS) += qcomsmempart.o
+--- /dev/null
++++ b/drivers/mtd/parsers/scpart.c
+@@ -0,0 +1,248 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++/*
++ * drivers/mtd/scpart.c: Sercomm Partition Parser
++ *
++ * Copyright (C) 2018 NOGUCHI Hiroshi
++ * Copyright (C) 2022 Mikhail Zhilkin
++ */
++
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/module.h>
++
++#define MOD_NAME "scpart"
++
++#ifdef pr_fmt
++#undef pr_fmt
++#endif
++
++#define pr_fmt(fmt) MOD_NAME ": " fmt
++
++#define ID_ALREADY_FOUND 0xffffffffUL
++
++#define MAP_OFFS_IN_BLK 0x800
++#define MAP_MIRROR_NUM 2
++
++static const char sc_part_magic[] = {
++ 'S', 'C', 'F', 'L', 'M', 'A', 'P', 'O', 'K', '\0',
++};
++#define PART_MAGIC_LEN sizeof(sc_part_magic)
++
++/* assumes that all fields are set by CPU native endian */
++struct sc_part_desc {
++ uint32_t part_id;
++ uint32_t part_offs;
++ uint32_t part_bytes;
++};
++
++static uint32_t scpart_desc_is_valid(struct sc_part_desc *pdesc)
++{
++ return ((pdesc->part_id != 0xffffffffUL) &&
++ (pdesc->part_offs != 0xffffffffUL) &&
++ (pdesc->part_bytes != 0xffffffffUL));
++}
++
++static int scpart_scan_partmap(struct mtd_info *master, loff_t partmap_offs,
++ struct sc_part_desc **ppdesc)
++{
++ int cnt = 0;
++ int res = 0;
++ int res2;
++ loff_t offs;
++ size_t retlen;
++ struct sc_part_desc *pdesc = NULL;
++ struct sc_part_desc *tmpdesc;
++ uint8_t *buf;
++
++ buf = kzalloc(master->erasesize, GFP_KERNEL);
++ if (!buf) {
++ res = -ENOMEM;
++ goto out;
++ }
++
++ res2 = mtd_read(master, partmap_offs, master->erasesize, &retlen, buf);
++ if (res2 || retlen != master->erasesize) {
++ res = -EIO;
++ goto free;
++ }
++
++ for (offs = MAP_OFFS_IN_BLK;
++ offs < master->erasesize - sizeof(*tmpdesc);
++ offs += sizeof(*tmpdesc)) {
++ tmpdesc = (struct sc_part_desc *)&buf[offs];
++ if (!scpart_desc_is_valid(tmpdesc))
++ break;
++ cnt++;
++ }
++
++ if (cnt > 0) {
++ int bytes = cnt * sizeof(*pdesc);
++
++ pdesc = kcalloc(cnt, sizeof(*pdesc), GFP_KERNEL);
++ if (!pdesc) {
++ res = -ENOMEM;
++ goto free;
++ }
++ memcpy(pdesc, &(buf[MAP_OFFS_IN_BLK]), bytes);
++
++ *ppdesc = pdesc;
++ res = cnt;
++ }
++
++free:
++ kfree(buf);
++
++out:
++ return res;
++}
++
++static int scpart_find_partmap(struct mtd_info *master,
++ struct sc_part_desc **ppdesc)
++{
++ int magic_found = 0;
++ int res = 0;
++ int res2;
++ loff_t offs = 0;
++ size_t retlen;
++ uint8_t rdbuf[PART_MAGIC_LEN];
++
++ while ((magic_found < MAP_MIRROR_NUM) &&
++ (offs < master->size) &&
++ !mtd_block_isbad(master, offs)) {
++ res2 = mtd_read(master, offs, PART_MAGIC_LEN, &retlen, rdbuf);
++ if (res2 || retlen != PART_MAGIC_LEN) {
++ res = -EIO;
++ goto out;
++ }
++ if (!memcmp(rdbuf, sc_part_magic, PART_MAGIC_LEN)) {
++ pr_debug("Signature found at 0x%llx\n", offs);
++ magic_found++;
++ res = scpart_scan_partmap(master, offs, ppdesc);
++ if (res > 0)
++ goto out;
++ }
++ offs += master->erasesize;
++ }
++
++out:
++ if (res > 0)
++ pr_info("Valid 'SC PART MAP' (%d partitions) found at 0x%llx\n", res, offs);
++ else
++ pr_info("No valid 'SC PART MAP' was found\n");
++
++ return res;
++}
++
++static int scpart_parse(struct mtd_info *master,
++ const struct mtd_partition **pparts,
++ struct mtd_part_parser_data *data)
++{
++ const char *partname;
++ int n;
++ int nr_scparts;
++ int nr_parts = 0;
++ int res = 0;
++ struct sc_part_desc *scpart_map = NULL;
++ struct mtd_partition *parts = NULL;
++ struct device_node *mtd_node;
++ struct device_node *ofpart_node;
++ struct device_node *pp;
++
++ mtd_node = mtd_get_of_node(master);
++ if (!mtd_node) {
++ res = -ENOENT;
++ goto out;
++ }
++
++ ofpart_node = of_get_child_by_name(mtd_node, "partitions");
++ if (!ofpart_node) {
++ pr_info("%s: 'partitions' subnode not found on %pOF.\n",
++ master->name, mtd_node);
++ res = -ENOENT;
++ goto out;
++ }
++
++ nr_scparts = scpart_find_partmap(master, &scpart_map);
++ if (nr_scparts <= 0) {
++ pr_info("No any partitions was found in 'SC PART MAP'.\n");
++ res = -ENOENT;
++ goto free;
++ }
++
++ parts = kcalloc(of_get_child_count(ofpart_node), sizeof(*parts),
++ GFP_KERNEL);
++ if (!parts) {
++ res = -ENOMEM;
++ goto free;
++ }
++
++ for_each_child_of_node(ofpart_node, pp) {
++ u32 scpart_id;
++
++ if (of_property_read_u32(pp, "sercomm,scpart-id", &scpart_id))
++ continue;
++
++ for (n = 0 ; n < nr_scparts ; n++)
++ if ((scpart_map[n].part_id != ID_ALREADY_FOUND) &&
++ (scpart_id == scpart_map[n].part_id))
++ break;
++ if (n >= nr_scparts)
++ /* not match */
++ continue;
++
++ /* add the partition found in OF into MTD partition array */
++ parts[nr_parts].offset = scpart_map[n].part_offs;
++ parts[nr_parts].size = scpart_map[n].part_bytes;
++ parts[nr_parts].of_node = pp;
++
++ if (!of_property_read_string(pp, "label", &partname))
++ parts[nr_parts].name = partname;
++ if (of_property_read_bool(pp, "read-only"))
++ parts[nr_parts].mask_flags |= MTD_WRITEABLE;
++ if (of_property_read_bool(pp, "lock"))
++ parts[nr_parts].mask_flags |= MTD_POWERUP_LOCK;
++
++ /* mark as 'done' */
++ scpart_map[n].part_id = ID_ALREADY_FOUND;
++
++ nr_parts++;
++ }
++
++ if (nr_parts > 0) {
++ *pparts = parts;
++ res = nr_parts;
++ } else
++ pr_info("No partition in OF matches partition ID with 'SC PART MAP'.\n");
++
++ of_node_put(pp);
++
++free:
++ kfree(scpart_map);
++ if (res <= 0)
++ kfree(parts);
++
++out:
++ return res;
++}
++
++static const struct of_device_id scpart_parser_of_match_table[] = {
++ { .compatible = "sercomm,sc-partitions" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, scpart_parser_of_match_table);
++
++static struct mtd_part_parser scpart_parser = {
++ .parse_fn = scpart_parse,
++ .name = "scpart",
++ .of_match_table = scpart_parser_of_match_table,
++};
++module_mtd_part_parser(scpart_parser);
++
++/* mtd parsers will request the module by parser name */
++MODULE_ALIAS("scpart");
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("NOGUCHI Hiroshi <drvlabo@gmail.com>");
++MODULE_AUTHOR("Mikhail Zhilkin <csharper2005@gmail.com>");
++MODULE_DESCRIPTION("Sercomm partition parser");
+++ /dev/null
-From ad9b10d1eaada169bd764abcab58f08538877e26 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 22 Jun 2022 03:06:28 +0200
-Subject: mtd: core: introduce of support for dynamic partitions
-
-We have many parser that register mtd partitions at runtime. One example
-is the cmdlinepart or the smem-part parser where the compatible is defined
-in the dts and the partitions gets detected and registered by the
-parser. This is problematic for the NVMEM subsystem that requires an OF
-node to detect NVMEM cells.
-
-To fix this problem, introduce an additional logic that will try to
-assign an OF node to the MTD if declared.
-
-On MTD addition, it will be checked if the MTD has an OF node and if
-not declared will check if a partition with the same label / node name is
-declared in DTS. If an exact match is found, the partition dynamically
-allocated by the parser will have a connected OF node.
-
-The NVMEM subsystem will detect the OF node and register any NVMEM cells
-declared statically in the DTS.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220622010628.30414-4-ansuelsmth@gmail.com
----
- drivers/mtd/mtdcore.c | 61 +++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 61 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -564,6 +564,66 @@ static int mtd_nvmem_add(struct mtd_info
- return 0;
- }
-
-+static void mtd_check_of_node(struct mtd_info *mtd)
-+{
-+ struct device_node *partitions, *parent_dn, *mtd_dn = NULL;
-+ const char *pname, *prefix = "partition-";
-+ int plen, mtd_name_len, offset, prefix_len;
-+ struct mtd_info *parent;
-+ bool found = false;
-+
-+ /* Check if MTD already has a device node */
-+ if (dev_of_node(&mtd->dev))
-+ return;
-+
-+ /* Check if a partitions node exist */
-+ parent = mtd->parent;
-+ parent_dn = dev_of_node(&parent->dev);
-+ if (!parent_dn)
-+ return;
-+
-+ partitions = of_get_child_by_name(parent_dn, "partitions");
-+ if (!partitions)
-+ goto exit_parent;
-+
-+ prefix_len = strlen(prefix);
-+ mtd_name_len = strlen(mtd->name);
-+
-+ /* Search if a partition is defined with the same name */
-+ for_each_child_of_node(partitions, mtd_dn) {
-+ offset = 0;
-+
-+ /* Skip partition with no/wrong prefix */
-+ if (!of_node_name_prefix(mtd_dn, "partition-"))
-+ continue;
-+
-+ /* Label have priority. Check that first */
-+ if (of_property_read_string(mtd_dn, "label", &pname)) {
-+ of_property_read_string(mtd_dn, "name", &pname);
-+ offset = prefix_len;
-+ }
-+
-+ plen = strlen(pname) - offset;
-+ if (plen == mtd_name_len &&
-+ !strncmp(mtd->name, pname + offset, plen)) {
-+ found = true;
-+ break;
-+ }
-+ }
-+
-+ if (!found)
-+ goto exit_partitions;
-+
-+ /* Set of_node only for nvmem */
-+ if (of_device_is_compatible(mtd_dn, "nvmem-cells"))
-+ mtd_set_of_node(mtd, mtd_dn);
-+
-+exit_partitions:
-+ of_node_put(partitions);
-+exit_parent:
-+ of_node_put(parent_dn);
-+}
-+
- /**
- * add_mtd_device - register an MTD device
- * @mtd: pointer to new MTD device info structure
-@@ -669,6 +729,7 @@ int add_mtd_device(struct mtd_info *mtd)
- mtd->dev.devt = MTD_DEVT(i);
- dev_set_name(&mtd->dev, "mtd%d", i);
- dev_set_drvdata(&mtd->dev, mtd);
-+ mtd_check_of_node(mtd);
- of_node_get(mtd_get_of_node(mtd));
- error = device_register(&mtd->dev);
- if (error)
--- /dev/null
+From ad9b10d1eaada169bd764abcab58f08538877e26 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Wed, 22 Jun 2022 03:06:28 +0200
+Subject: mtd: core: introduce of support for dynamic partitions
+
+We have many parser that register mtd partitions at runtime. One example
+is the cmdlinepart or the smem-part parser where the compatible is defined
+in the dts and the partitions gets detected and registered by the
+parser. This is problematic for the NVMEM subsystem that requires an OF
+node to detect NVMEM cells.
+
+To fix this problem, introduce an additional logic that will try to
+assign an OF node to the MTD if declared.
+
+On MTD addition, it will be checked if the MTD has an OF node and if
+not declared will check if a partition with the same label / node name is
+declared in DTS. If an exact match is found, the partition dynamically
+allocated by the parser will have a connected OF node.
+
+The NVMEM subsystem will detect the OF node and register any NVMEM cells
+declared statically in the DTS.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Link: https://lore.kernel.org/linux-mtd/20220622010628.30414-4-ansuelsmth@gmail.com
+---
+ drivers/mtd/mtdcore.c | 61 +++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 61 insertions(+)
+
+--- a/drivers/mtd/mtdcore.c
++++ b/drivers/mtd/mtdcore.c
+@@ -564,6 +564,66 @@ static int mtd_nvmem_add(struct mtd_info
+ return 0;
+ }
+
++static void mtd_check_of_node(struct mtd_info *mtd)
++{
++ struct device_node *partitions, *parent_dn, *mtd_dn = NULL;
++ const char *pname, *prefix = "partition-";
++ int plen, mtd_name_len, offset, prefix_len;
++ struct mtd_info *parent;
++ bool found = false;
++
++ /* Check if MTD already has a device node */
++ if (dev_of_node(&mtd->dev))
++ return;
++
++ /* Check if a partitions node exist */
++ parent = mtd->parent;
++ parent_dn = dev_of_node(&parent->dev);
++ if (!parent_dn)
++ return;
++
++ partitions = of_get_child_by_name(parent_dn, "partitions");
++ if (!partitions)
++ goto exit_parent;
++
++ prefix_len = strlen(prefix);
++ mtd_name_len = strlen(mtd->name);
++
++ /* Search if a partition is defined with the same name */
++ for_each_child_of_node(partitions, mtd_dn) {
++ offset = 0;
++
++ /* Skip partition with no/wrong prefix */
++ if (!of_node_name_prefix(mtd_dn, "partition-"))
++ continue;
++
++ /* Label have priority. Check that first */
++ if (of_property_read_string(mtd_dn, "label", &pname)) {
++ of_property_read_string(mtd_dn, "name", &pname);
++ offset = prefix_len;
++ }
++
++ plen = strlen(pname) - offset;
++ if (plen == mtd_name_len &&
++ !strncmp(mtd->name, pname + offset, plen)) {
++ found = true;
++ break;
++ }
++ }
++
++ if (!found)
++ goto exit_partitions;
++
++ /* Set of_node only for nvmem */
++ if (of_device_is_compatible(mtd_dn, "nvmem-cells"))
++ mtd_set_of_node(mtd, mtd_dn);
++
++exit_partitions:
++ of_node_put(partitions);
++exit_parent:
++ of_node_put(parent_dn);
++}
++
+ /**
+ * add_mtd_device - register an MTD device
+ * @mtd: pointer to new MTD device info structure
+@@ -669,6 +729,7 @@ int add_mtd_device(struct mtd_info *mtd)
+ mtd->dev.devt = MTD_DEVT(i);
+ dev_set_name(&mtd->dev, "mtd%d", i);
+ dev_set_drvdata(&mtd->dev, mtd);
++ mtd_check_of_node(mtd);
+ of_node_get(mtd_get_of_node(mtd));
+ error = device_register(&mtd->dev);
+ if (error)
+++ /dev/null
-From 13344f8ce8a0d98aa7f5d69ce3b47393c73a343b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 27 Dec 2021 15:59:04 +0100
-Subject: [PATCH] dt-bindings: leds: add Broadcom's BCM63138 controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom used 2 LEDs hardware blocks for their BCM63xx SoCs:
-1. Older one (BCM6318, BCM6328, BCM6362, BCM63268, BCM6838)
-2. Newer one (BCM6848, BCM6858, BCM63138, BCM63148, BCM63381, BCM68360)
-
-The newer one was also later also used on BCM4908 SoC.
-
-Old block is already documented in the leds-bcm6328.yaml. This binding
-documents the new one which uses different registers & programming. It's
-first used in BCM63138 thus the binding name.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- .../bindings/leds/leds-bcm63138.yaml | 95 +++++++++++++++++++
- 1 file changed, 95 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-@@ -0,0 +1,95 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom's BCM63138 LEDs controller
-+
-+maintainers:
-+ - Rafał Miłecki <rafal@milecki.pl>
-+
-+description: |
-+ This LEDs controller was first used on BCM63138 and later reused on BCM4908,
-+ BCM6848, BCM6858, BCM63138, BCM63148, BCM63381 and BCM68360 SoCs.
-+
-+ It supports up to 32 LEDs that can be connected parallelly or serially. It
-+ also includes limited support for hardware blinking.
-+
-+ Binding serially connected LEDs isn't documented yet.
-+
-+properties:
-+ compatible:
-+ oneOf:
-+ - items:
-+ - enum:
-+ - brcm,bcm4908-leds
-+ - brcm,bcm6848-leds
-+ - brcm,bcm6858-leds
-+ - brcm,bcm63148-leds
-+ - brcm,bcm63381-leds
-+ - brcm,bcm68360-leds
-+ - const: brcm,bcm63138-leds
-+ - const: brcm,bcm63138-leds
-+
-+ reg:
-+ maxItems: 1
-+
-+ "#address-cells":
-+ const: 1
-+
-+ "#size-cells":
-+ const: 0
-+
-+patternProperties:
-+ "^led@[a-f0-9]+$":
-+ type: object
-+
-+ $ref: common.yaml#
-+
-+ properties:
-+ reg:
-+ maxItems: 1
-+ description: LED pin number
-+
-+ active-low:
-+ type: boolean
-+ description: Makes LED active low.
-+
-+ required:
-+ - reg
-+
-+ unevaluatedProperties: false
-+
-+required:
-+ - reg
-+ - "#address-cells"
-+ - "#size-cells"
-+
-+additionalProperties: false
-+
-+examples:
-+ - |
-+ #include <dt-bindings/leds/common.h>
-+
-+ leds@ff800800 {
-+ compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
-+ reg = <0xff800800 0xdc>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ led@0 {
-+ reg = <0x0>;
-+ function = LED_FUNCTION_POWER;
-+ color = <LED_COLOR_ID_GREEN>;
-+ default-state = "on";
-+ };
-+
-+ led@3 {
-+ reg = <0x3>;
-+ function = LED_FUNCTION_STATUS;
-+ color = <LED_COLOR_ID_GREEN>;
-+ active-low;
-+ };
-+ };
+++ /dev/null
-From a0ba692072d89075d0a75c7ad9df31f2c1ee9a1c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 27 Dec 2021 15:59:05 +0100
-Subject: [PATCH] leds: bcm63138: add support for BCM63138 controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a new controller first introduced in BCM63138 SoC. Later it was
-also used in BCM4908, some BCM68xx and some BCM63xxx SoCs.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/blink/Kconfig | 12 ++
- drivers/leds/blink/Makefile | 1 +
- drivers/leds/blink/leds-bcm63138.c | 308 +++++++++++++++++++++++++++++
- 3 files changed, 321 insertions(+)
- create mode 100644 drivers/leds/blink/leds-bcm63138.c
-
---- a/drivers/leds/blink/Kconfig
-+++ b/drivers/leds/blink/Kconfig
-@@ -1,3 +1,15 @@
-+config LEDS_BCM63138
-+ tristate "LED Support for Broadcom BCM63138 SoC"
-+ depends on LEDS_CLASS
-+ depends on ARCH_BCM4908 || ARCH_BCM_5301X || BCM63XX || COMPILE_TEST
-+ depends on HAS_IOMEM
-+ depends on OF
-+ default ARCH_BCM4908
-+ help
-+ This option enables support for LED controller that is part of
-+ BCM63138 SoC. The same hardware block is known to be also used
-+ in BCM4908, BCM6848, BCM6858, BCM63148, BCM63381 and BCM68360.
-+
- config LEDS_LGM
- tristate "LED support for LGM SoC series"
- depends on X86 || COMPILE_TEST
---- a/drivers/leds/blink/Makefile
-+++ b/drivers/leds/blink/Makefile
-@@ -1,2 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
-+obj-$(CONFIG_LEDS_BCM63138) += leds-bcm63138.o
- obj-$(CONFIG_LEDS_LGM) += leds-lgm-sso.o
---- /dev/null
-+++ b/drivers/leds/blink/leds-bcm63138.c
-@@ -0,0 +1,308 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/pinctrl/consumer.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+
-+#define BCM63138_MAX_LEDS 32
-+#define BCM63138_MAX_BRIGHTNESS 9
-+
-+#define BCM63138_LED_BITS 4 /* how many bits control a single LED */
-+#define BCM63138_LED_MASK ((1 << BCM63138_LED_BITS) - 1) /* 0xf */
-+#define BCM63138_LEDS_PER_REG (32 / BCM63138_LED_BITS) /* 8 */
-+
-+#define BCM63138_GLB_CTRL 0x00
-+#define BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL 0x00000002
-+#define BCM63138_GLB_CTRL_SERIAL_LED_EN_POL 0x00000008
-+#define BCM63138_MASK 0x04
-+#define BCM63138_HW_LED_EN 0x08
-+#define BCM63138_SERIAL_LED_SHIFT_SEL 0x0c
-+#define BCM63138_FLASH_RATE_CTRL1 0x10
-+#define BCM63138_FLASH_RATE_CTRL2 0x14
-+#define BCM63138_FLASH_RATE_CTRL3 0x18
-+#define BCM63138_FLASH_RATE_CTRL4 0x1c
-+#define BCM63138_BRIGHT_CTRL1 0x20
-+#define BCM63138_BRIGHT_CTRL2 0x24
-+#define BCM63138_BRIGHT_CTRL3 0x28
-+#define BCM63138_BRIGHT_CTRL4 0x2c
-+#define BCM63138_POWER_LED_CFG 0x30
-+#define BCM63138_HW_POLARITY 0xb4
-+#define BCM63138_SW_DATA 0xb8
-+#define BCM63138_SW_POLARITY 0xbc
-+#define BCM63138_PARALLEL_LED_POLARITY 0xc0
-+#define BCM63138_SERIAL_LED_POLARITY 0xc4
-+#define BCM63138_HW_LED_STATUS 0xc8
-+#define BCM63138_FLASH_CTRL_STATUS 0xcc
-+#define BCM63138_FLASH_BRT_CTRL 0xd0
-+#define BCM63138_FLASH_P_LED_OUT_STATUS 0xd4
-+#define BCM63138_FLASH_S_LED_OUT_STATUS 0xd8
-+
-+struct bcm63138_leds {
-+ struct device *dev;
-+ void __iomem *base;
-+ spinlock_t lock;
-+};
-+
-+struct bcm63138_led {
-+ struct bcm63138_leds *leds;
-+ struct led_classdev cdev;
-+ u32 pin;
-+ bool active_low;
-+};
-+
-+/*
-+ * I/O access
-+ */
-+
-+static void bcm63138_leds_write(struct bcm63138_leds *leds, unsigned int reg,
-+ u32 data)
-+{
-+ writel(data, leds->base + reg);
-+}
-+
-+static unsigned long bcm63138_leds_read(struct bcm63138_leds *leds,
-+ unsigned int reg)
-+{
-+ return readl(leds->base + reg);
-+}
-+
-+static void bcm63138_leds_update_bits(struct bcm63138_leds *leds,
-+ unsigned int reg, u32 mask, u32 val)
-+{
-+ WARN_ON(val & ~mask);
-+
-+ bcm63138_leds_write(leds, reg, (bcm63138_leds_read(leds, reg) & ~mask) | (val & mask));
-+}
-+
-+/*
-+ * Helpers
-+ */
-+
-+static void bcm63138_leds_set_flash_rate(struct bcm63138_leds *leds,
-+ struct bcm63138_led *led,
-+ u8 value)
-+{
-+ int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
-+ int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
-+
-+ bcm63138_leds_update_bits(leds, BCM63138_FLASH_RATE_CTRL1 + reg_offset,
-+ BCM63138_LED_MASK << shift, value << shift);
-+}
-+
-+static void bcm63138_leds_set_bright(struct bcm63138_leds *leds,
-+ struct bcm63138_led *led,
-+ u8 value)
-+{
-+ int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
-+ int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
-+
-+ bcm63138_leds_update_bits(leds, BCM63138_BRIGHT_CTRL1 + reg_offset,
-+ BCM63138_LED_MASK << shift, value << shift);
-+}
-+
-+static void bcm63138_leds_enable_led(struct bcm63138_leds *leds,
-+ struct bcm63138_led *led,
-+ enum led_brightness value)
-+{
-+ u32 bit = BIT(led->pin);
-+
-+ bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit,
-+ value == LED_OFF ? 0 : bit);
-+}
-+
-+/*
-+ * API callbacks
-+ */
-+
-+static void bcm63138_leds_brightness_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
-+ struct bcm63138_leds *leds = led->leds;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&leds->lock, flags);
-+
-+ bcm63138_leds_enable_led(leds, led, value);
-+ if (!value)
-+ bcm63138_leds_set_flash_rate(leds, led, 0);
-+ else
-+ bcm63138_leds_set_bright(leds, led, value);
-+
-+ spin_unlock_irqrestore(&leds->lock, flags);
-+}
-+
-+static int bcm63138_leds_blink_set(struct led_classdev *led_cdev,
-+ unsigned long *delay_on,
-+ unsigned long *delay_off)
-+{
-+ struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
-+ struct bcm63138_leds *leds = led->leds;
-+ unsigned long flags;
-+ u8 value;
-+
-+ if (!*delay_on && !*delay_off) {
-+ *delay_on = 640;
-+ *delay_off = 640;
-+ }
-+
-+ if (*delay_on != *delay_off) {
-+ dev_dbg(led_cdev->dev, "Blinking at unequal delays is not supported\n");
-+ return -EINVAL;
-+ }
-+
-+ switch (*delay_on) {
-+ case 1152 ... 1408: /* 1280 ms ± 10% */
-+ value = 0x7;
-+ break;
-+ case 576 ... 704: /* 640 ms ± 10% */
-+ value = 0x6;
-+ break;
-+ case 288 ... 352: /* 320 ms ± 10% */
-+ value = 0x5;
-+ break;
-+ case 126 ... 154: /* 140 ms ± 10% */
-+ value = 0x4;
-+ break;
-+ case 59 ... 72: /* 65 ms ± 10% */
-+ value = 0x3;
-+ break;
-+ default:
-+ dev_dbg(led_cdev->dev, "Blinking delay value %lu is unsupported\n",
-+ *delay_on);
-+ return -EINVAL;
-+ }
-+
-+ spin_lock_irqsave(&leds->lock, flags);
-+
-+ bcm63138_leds_enable_led(leds, led, BCM63138_MAX_BRIGHTNESS);
-+ bcm63138_leds_set_flash_rate(leds, led, value);
-+
-+ spin_unlock_irqrestore(&leds->lock, flags);
-+
-+ return 0;
-+}
-+
-+/*
-+ * LED driver
-+ */
-+
-+static void bcm63138_leds_create_led(struct bcm63138_leds *leds,
-+ struct device_node *np)
-+{
-+ struct led_init_data init_data = {
-+ .fwnode = of_fwnode_handle(np),
-+ };
-+ struct device *dev = leds->dev;
-+ struct bcm63138_led *led;
-+ struct pinctrl *pinctrl;
-+ u32 bit;
-+ int err;
-+
-+ led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
-+ if (!led) {
-+ dev_err(dev, "Failed to alloc LED\n");
-+ return;
-+ }
-+
-+ led->leds = leds;
-+
-+ if (of_property_read_u32(np, "reg", &led->pin)) {
-+ dev_err(dev, "Missing \"reg\" property in %pOF\n", np);
-+ goto err_free;
-+ }
-+
-+ if (led->pin >= BCM63138_MAX_LEDS) {
-+ dev_err(dev, "Invalid \"reg\" value %d\n", led->pin);
-+ goto err_free;
-+ }
-+
-+ led->active_low = of_property_read_bool(np, "active-low");
-+
-+ led->cdev.max_brightness = BCM63138_MAX_BRIGHTNESS;
-+ led->cdev.brightness_set = bcm63138_leds_brightness_set;
-+ led->cdev.blink_set = bcm63138_leds_blink_set;
-+
-+ err = devm_led_classdev_register_ext(dev, &led->cdev, &init_data);
-+ if (err) {
-+ dev_err(dev, "Failed to register LED %pOF: %d\n", np, err);
-+ goto err_free;
-+ }
-+
-+ pinctrl = devm_pinctrl_get_select_default(led->cdev.dev);
-+ if (IS_ERR(pinctrl) && PTR_ERR(pinctrl) != -ENODEV) {
-+ dev_warn(led->cdev.dev, "Failed to select %pOF pinctrl: %ld\n",
-+ np, PTR_ERR(pinctrl));
-+ }
-+
-+ bit = BIT(led->pin);
-+ bcm63138_leds_update_bits(leds, BCM63138_PARALLEL_LED_POLARITY, bit,
-+ led->active_low ? 0 : bit);
-+ bcm63138_leds_update_bits(leds, BCM63138_HW_LED_EN, bit, 0);
-+ bcm63138_leds_set_flash_rate(leds, led, 0);
-+ bcm63138_leds_enable_led(leds, led, led->cdev.brightness);
-+
-+ return;
-+
-+err_free:
-+ devm_kfree(dev, led);
-+}
-+
-+static int bcm63138_leds_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = dev_of_node(&pdev->dev);
-+ struct device *dev = &pdev->dev;
-+ struct bcm63138_leds *leds;
-+ struct device_node *child;
-+
-+ leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
-+ if (!leds)
-+ return -ENOMEM;
-+
-+ leds->dev = dev;
-+
-+ leds->base = devm_platform_ioremap_resource(pdev, 0);
-+ if (IS_ERR(leds->base))
-+ return PTR_ERR(leds->base);
-+
-+ spin_lock_init(&leds->lock);
-+
-+ bcm63138_leds_write(leds, BCM63138_GLB_CTRL,
-+ BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL |
-+ BCM63138_GLB_CTRL_SERIAL_LED_EN_POL);
-+ bcm63138_leds_write(leds, BCM63138_HW_LED_EN, 0);
-+ bcm63138_leds_write(leds, BCM63138_SERIAL_LED_POLARITY, 0);
-+ bcm63138_leds_write(leds, BCM63138_PARALLEL_LED_POLARITY, 0);
-+
-+ for_each_available_child_of_node(np, child) {
-+ bcm63138_leds_create_led(leds, child);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id bcm63138_leds_of_match_table[] = {
-+ { .compatible = "brcm,bcm63138-leds", },
-+ { },
-+};
-+
-+static struct platform_driver bcm63138_leds_driver = {
-+ .probe = bcm63138_leds_probe,
-+ .driver = {
-+ .name = "leds-bcm63xxx",
-+ .of_match_table = bcm63138_leds_of_match_table,
-+ },
-+};
-+
-+module_platform_driver(bcm63138_leds_driver);
-+
-+MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_LICENSE("GPL");
-+MODULE_DEVICE_TABLE(of, bcm63138_leds_of_match_table);
--- /dev/null
+From 13344f8ce8a0d98aa7f5d69ce3b47393c73a343b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Mon, 27 Dec 2021 15:59:04 +0100
+Subject: [PATCH] dt-bindings: leds: add Broadcom's BCM63138 controller
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Broadcom used 2 LEDs hardware blocks for their BCM63xx SoCs:
+1. Older one (BCM6318, BCM6328, BCM6362, BCM63268, BCM6838)
+2. Newer one (BCM6848, BCM6858, BCM63138, BCM63148, BCM63381, BCM68360)
+
+The newer one was also later also used on BCM4908 SoC.
+
+Old block is already documented in the leds-bcm6328.yaml. This binding
+documents the new one which uses different registers & programming. It's
+first used in BCM63138 thus the binding name.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Reviewed-by: Rob Herring <robh@kernel.org>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Pavel Machek <pavel@ucw.cz>
+---
+ .../bindings/leds/leds-bcm63138.yaml | 95 +++++++++++++++++++
+ 1 file changed, 95 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
+@@ -0,0 +1,95 @@
++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Broadcom's BCM63138 LEDs controller
++
++maintainers:
++ - Rafał Miłecki <rafal@milecki.pl>
++
++description: |
++ This LEDs controller was first used on BCM63138 and later reused on BCM4908,
++ BCM6848, BCM6858, BCM63138, BCM63148, BCM63381 and BCM68360 SoCs.
++
++ It supports up to 32 LEDs that can be connected parallelly or serially. It
++ also includes limited support for hardware blinking.
++
++ Binding serially connected LEDs isn't documented yet.
++
++properties:
++ compatible:
++ oneOf:
++ - items:
++ - enum:
++ - brcm,bcm4908-leds
++ - brcm,bcm6848-leds
++ - brcm,bcm6858-leds
++ - brcm,bcm63148-leds
++ - brcm,bcm63381-leds
++ - brcm,bcm68360-leds
++ - const: brcm,bcm63138-leds
++ - const: brcm,bcm63138-leds
++
++ reg:
++ maxItems: 1
++
++ "#address-cells":
++ const: 1
++
++ "#size-cells":
++ const: 0
++
++patternProperties:
++ "^led@[a-f0-9]+$":
++ type: object
++
++ $ref: common.yaml#
++
++ properties:
++ reg:
++ maxItems: 1
++ description: LED pin number
++
++ active-low:
++ type: boolean
++ description: Makes LED active low.
++
++ required:
++ - reg
++
++ unevaluatedProperties: false
++
++required:
++ - reg
++ - "#address-cells"
++ - "#size-cells"
++
++additionalProperties: false
++
++examples:
++ - |
++ #include <dt-bindings/leds/common.h>
++
++ leds@ff800800 {
++ compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
++ reg = <0xff800800 0xdc>;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ led@0 {
++ reg = <0x0>;
++ function = LED_FUNCTION_POWER;
++ color = <LED_COLOR_ID_GREEN>;
++ default-state = "on";
++ };
++
++ led@3 {
++ reg = <0x3>;
++ function = LED_FUNCTION_STATUS;
++ color = <LED_COLOR_ID_GREEN>;
++ active-low;
++ };
++ };
--- /dev/null
+From a0ba692072d89075d0a75c7ad9df31f2c1ee9a1c Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Mon, 27 Dec 2021 15:59:05 +0100
+Subject: [PATCH] leds: bcm63138: add support for BCM63138 controller
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's a new controller first introduced in BCM63138 SoC. Later it was
+also used in BCM4908, some BCM68xx and some BCM63xxx SoCs.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Pavel Machek <pavel@ucw.cz>
+---
+ drivers/leds/blink/Kconfig | 12 ++
+ drivers/leds/blink/Makefile | 1 +
+ drivers/leds/blink/leds-bcm63138.c | 308 +++++++++++++++++++++++++++++
+ 3 files changed, 321 insertions(+)
+ create mode 100644 drivers/leds/blink/leds-bcm63138.c
+
+--- a/drivers/leds/blink/Kconfig
++++ b/drivers/leds/blink/Kconfig
+@@ -1,3 +1,15 @@
++config LEDS_BCM63138
++ tristate "LED Support for Broadcom BCM63138 SoC"
++ depends on LEDS_CLASS
++ depends on ARCH_BCM4908 || ARCH_BCM_5301X || BCM63XX || COMPILE_TEST
++ depends on HAS_IOMEM
++ depends on OF
++ default ARCH_BCM4908
++ help
++ This option enables support for LED controller that is part of
++ BCM63138 SoC. The same hardware block is known to be also used
++ in BCM4908, BCM6848, BCM6858, BCM63148, BCM63381 and BCM68360.
++
+ config LEDS_LGM
+ tristate "LED support for LGM SoC series"
+ depends on X86 || COMPILE_TEST
+--- a/drivers/leds/blink/Makefile
++++ b/drivers/leds/blink/Makefile
+@@ -1,2 +1,3 @@
+ # SPDX-License-Identifier: GPL-2.0
++obj-$(CONFIG_LEDS_BCM63138) += leds-bcm63138.o
+ obj-$(CONFIG_LEDS_LGM) += leds-lgm-sso.o
+--- /dev/null
++++ b/drivers/leds/blink/leds-bcm63138.c
+@@ -0,0 +1,308 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/*
++ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
++ */
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/leds.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/pinctrl/consumer.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++
++#define BCM63138_MAX_LEDS 32
++#define BCM63138_MAX_BRIGHTNESS 9
++
++#define BCM63138_LED_BITS 4 /* how many bits control a single LED */
++#define BCM63138_LED_MASK ((1 << BCM63138_LED_BITS) - 1) /* 0xf */
++#define BCM63138_LEDS_PER_REG (32 / BCM63138_LED_BITS) /* 8 */
++
++#define BCM63138_GLB_CTRL 0x00
++#define BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL 0x00000002
++#define BCM63138_GLB_CTRL_SERIAL_LED_EN_POL 0x00000008
++#define BCM63138_MASK 0x04
++#define BCM63138_HW_LED_EN 0x08
++#define BCM63138_SERIAL_LED_SHIFT_SEL 0x0c
++#define BCM63138_FLASH_RATE_CTRL1 0x10
++#define BCM63138_FLASH_RATE_CTRL2 0x14
++#define BCM63138_FLASH_RATE_CTRL3 0x18
++#define BCM63138_FLASH_RATE_CTRL4 0x1c
++#define BCM63138_BRIGHT_CTRL1 0x20
++#define BCM63138_BRIGHT_CTRL2 0x24
++#define BCM63138_BRIGHT_CTRL3 0x28
++#define BCM63138_BRIGHT_CTRL4 0x2c
++#define BCM63138_POWER_LED_CFG 0x30
++#define BCM63138_HW_POLARITY 0xb4
++#define BCM63138_SW_DATA 0xb8
++#define BCM63138_SW_POLARITY 0xbc
++#define BCM63138_PARALLEL_LED_POLARITY 0xc0
++#define BCM63138_SERIAL_LED_POLARITY 0xc4
++#define BCM63138_HW_LED_STATUS 0xc8
++#define BCM63138_FLASH_CTRL_STATUS 0xcc
++#define BCM63138_FLASH_BRT_CTRL 0xd0
++#define BCM63138_FLASH_P_LED_OUT_STATUS 0xd4
++#define BCM63138_FLASH_S_LED_OUT_STATUS 0xd8
++
++struct bcm63138_leds {
++ struct device *dev;
++ void __iomem *base;
++ spinlock_t lock;
++};
++
++struct bcm63138_led {
++ struct bcm63138_leds *leds;
++ struct led_classdev cdev;
++ u32 pin;
++ bool active_low;
++};
++
++/*
++ * I/O access
++ */
++
++static void bcm63138_leds_write(struct bcm63138_leds *leds, unsigned int reg,
++ u32 data)
++{
++ writel(data, leds->base + reg);
++}
++
++static unsigned long bcm63138_leds_read(struct bcm63138_leds *leds,
++ unsigned int reg)
++{
++ return readl(leds->base + reg);
++}
++
++static void bcm63138_leds_update_bits(struct bcm63138_leds *leds,
++ unsigned int reg, u32 mask, u32 val)
++{
++ WARN_ON(val & ~mask);
++
++ bcm63138_leds_write(leds, reg, (bcm63138_leds_read(leds, reg) & ~mask) | (val & mask));
++}
++
++/*
++ * Helpers
++ */
++
++static void bcm63138_leds_set_flash_rate(struct bcm63138_leds *leds,
++ struct bcm63138_led *led,
++ u8 value)
++{
++ int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
++ int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
++
++ bcm63138_leds_update_bits(leds, BCM63138_FLASH_RATE_CTRL1 + reg_offset,
++ BCM63138_LED_MASK << shift, value << shift);
++}
++
++static void bcm63138_leds_set_bright(struct bcm63138_leds *leds,
++ struct bcm63138_led *led,
++ u8 value)
++{
++ int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
++ int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
++
++ bcm63138_leds_update_bits(leds, BCM63138_BRIGHT_CTRL1 + reg_offset,
++ BCM63138_LED_MASK << shift, value << shift);
++}
++
++static void bcm63138_leds_enable_led(struct bcm63138_leds *leds,
++ struct bcm63138_led *led,
++ enum led_brightness value)
++{
++ u32 bit = BIT(led->pin);
++
++ bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit,
++ value == LED_OFF ? 0 : bit);
++}
++
++/*
++ * API callbacks
++ */
++
++static void bcm63138_leds_brightness_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
++{
++ struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
++ struct bcm63138_leds *leds = led->leds;
++ unsigned long flags;
++
++ spin_lock_irqsave(&leds->lock, flags);
++
++ bcm63138_leds_enable_led(leds, led, value);
++ if (!value)
++ bcm63138_leds_set_flash_rate(leds, led, 0);
++ else
++ bcm63138_leds_set_bright(leds, led, value);
++
++ spin_unlock_irqrestore(&leds->lock, flags);
++}
++
++static int bcm63138_leds_blink_set(struct led_classdev *led_cdev,
++ unsigned long *delay_on,
++ unsigned long *delay_off)
++{
++ struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
++ struct bcm63138_leds *leds = led->leds;
++ unsigned long flags;
++ u8 value;
++
++ if (!*delay_on && !*delay_off) {
++ *delay_on = 640;
++ *delay_off = 640;
++ }
++
++ if (*delay_on != *delay_off) {
++ dev_dbg(led_cdev->dev, "Blinking at unequal delays is not supported\n");
++ return -EINVAL;
++ }
++
++ switch (*delay_on) {
++ case 1152 ... 1408: /* 1280 ms ± 10% */
++ value = 0x7;
++ break;
++ case 576 ... 704: /* 640 ms ± 10% */
++ value = 0x6;
++ break;
++ case 288 ... 352: /* 320 ms ± 10% */
++ value = 0x5;
++ break;
++ case 126 ... 154: /* 140 ms ± 10% */
++ value = 0x4;
++ break;
++ case 59 ... 72: /* 65 ms ± 10% */
++ value = 0x3;
++ break;
++ default:
++ dev_dbg(led_cdev->dev, "Blinking delay value %lu is unsupported\n",
++ *delay_on);
++ return -EINVAL;
++ }
++
++ spin_lock_irqsave(&leds->lock, flags);
++
++ bcm63138_leds_enable_led(leds, led, BCM63138_MAX_BRIGHTNESS);
++ bcm63138_leds_set_flash_rate(leds, led, value);
++
++ spin_unlock_irqrestore(&leds->lock, flags);
++
++ return 0;
++}
++
++/*
++ * LED driver
++ */
++
++static void bcm63138_leds_create_led(struct bcm63138_leds *leds,
++ struct device_node *np)
++{
++ struct led_init_data init_data = {
++ .fwnode = of_fwnode_handle(np),
++ };
++ struct device *dev = leds->dev;
++ struct bcm63138_led *led;
++ struct pinctrl *pinctrl;
++ u32 bit;
++ int err;
++
++ led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
++ if (!led) {
++ dev_err(dev, "Failed to alloc LED\n");
++ return;
++ }
++
++ led->leds = leds;
++
++ if (of_property_read_u32(np, "reg", &led->pin)) {
++ dev_err(dev, "Missing \"reg\" property in %pOF\n", np);
++ goto err_free;
++ }
++
++ if (led->pin >= BCM63138_MAX_LEDS) {
++ dev_err(dev, "Invalid \"reg\" value %d\n", led->pin);
++ goto err_free;
++ }
++
++ led->active_low = of_property_read_bool(np, "active-low");
++
++ led->cdev.max_brightness = BCM63138_MAX_BRIGHTNESS;
++ led->cdev.brightness_set = bcm63138_leds_brightness_set;
++ led->cdev.blink_set = bcm63138_leds_blink_set;
++
++ err = devm_led_classdev_register_ext(dev, &led->cdev, &init_data);
++ if (err) {
++ dev_err(dev, "Failed to register LED %pOF: %d\n", np, err);
++ goto err_free;
++ }
++
++ pinctrl = devm_pinctrl_get_select_default(led->cdev.dev);
++ if (IS_ERR(pinctrl) && PTR_ERR(pinctrl) != -ENODEV) {
++ dev_warn(led->cdev.dev, "Failed to select %pOF pinctrl: %ld\n",
++ np, PTR_ERR(pinctrl));
++ }
++
++ bit = BIT(led->pin);
++ bcm63138_leds_update_bits(leds, BCM63138_PARALLEL_LED_POLARITY, bit,
++ led->active_low ? 0 : bit);
++ bcm63138_leds_update_bits(leds, BCM63138_HW_LED_EN, bit, 0);
++ bcm63138_leds_set_flash_rate(leds, led, 0);
++ bcm63138_leds_enable_led(leds, led, led->cdev.brightness);
++
++ return;
++
++err_free:
++ devm_kfree(dev, led);
++}
++
++static int bcm63138_leds_probe(struct platform_device *pdev)
++{
++ struct device_node *np = dev_of_node(&pdev->dev);
++ struct device *dev = &pdev->dev;
++ struct bcm63138_leds *leds;
++ struct device_node *child;
++
++ leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
++ if (!leds)
++ return -ENOMEM;
++
++ leds->dev = dev;
++
++ leds->base = devm_platform_ioremap_resource(pdev, 0);
++ if (IS_ERR(leds->base))
++ return PTR_ERR(leds->base);
++
++ spin_lock_init(&leds->lock);
++
++ bcm63138_leds_write(leds, BCM63138_GLB_CTRL,
++ BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL |
++ BCM63138_GLB_CTRL_SERIAL_LED_EN_POL);
++ bcm63138_leds_write(leds, BCM63138_HW_LED_EN, 0);
++ bcm63138_leds_write(leds, BCM63138_SERIAL_LED_POLARITY, 0);
++ bcm63138_leds_write(leds, BCM63138_PARALLEL_LED_POLARITY, 0);
++
++ for_each_available_child_of_node(np, child) {
++ bcm63138_leds_create_led(leds, child);
++ }
++
++ return 0;
++}
++
++static const struct of_device_id bcm63138_leds_of_match_table[] = {
++ { .compatible = "brcm,bcm63138-leds", },
++ { },
++};
++
++static struct platform_driver bcm63138_leds_driver = {
++ .probe = bcm63138_leds_probe,
++ .driver = {
++ .name = "leds-bcm63xxx",
++ .of_match_table = bcm63138_leds_of_match_table,
++ },
++};
++
++module_platform_driver(bcm63138_leds_driver);
++
++MODULE_AUTHOR("Rafał Miłecki");
++MODULE_LICENSE("GPL");
++MODULE_DEVICE_TABLE(of, bcm63138_leds_of_match_table);
+++ /dev/null
-From 13b64a0c19059b38150c79d65d350ae44034c5df Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 17 Jul 2022 14:42:46 +0200
-Subject: [PATCH] dt-bindings: leds: leds-bcm63138: unify full stops in
- descriptions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Description of "reg" doesn't have full stop at the end. It makes sense
-as it's a one-sentence only. Use the same style for "active-low".
-
-Reported-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- Documentation/devicetree/bindings/leds/leds-bcm63138.yaml | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-@@ -54,7 +54,7 @@ patternProperties:
-
- active-low:
- type: boolean
-- description: Makes LED active low.
-+ description: Makes LED active low
-
- required:
- - reg
+++ /dev/null
-From bcc607cdbb1f931111196699426f0cb83bfb296a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 17 Jul 2022 14:42:47 +0200
-Subject: [PATCH] leds: add help info about BCM63138 module name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's what we do for all other LEDs drivers.
-
-Reported-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/blink/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/leds/blink/Kconfig
-+++ b/drivers/leds/blink/Kconfig
-@@ -10,6 +10,8 @@ config LEDS_BCM63138
- BCM63138 SoC. The same hardware block is known to be also used
- in BCM4908, BCM6848, BCM6858, BCM63148, BCM63381 and BCM68360.
-
-+ If compiled as module it will be called leds-bcm63138.
-+
- config LEDS_LGM
- tristate "LED support for LGM SoC series"
- depends on X86 || COMPILE_TEST
+++ /dev/null
-From 92cfc71ee2ddfb499ed53e21b28bdf8739bc70bc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 17 Jul 2022 14:42:48 +0200
-Subject: [PATCH] leds: leds-bcm63138: get rid of LED_OFF
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The whole "enum led_brightness" is marked as obsolete. Replace it with a
-(non-)zero check.
-
-Reported-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/blink/leds-bcm63138.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/leds/blink/leds-bcm63138.c
-+++ b/drivers/leds/blink/leds-bcm63138.c
-@@ -113,8 +113,7 @@ static void bcm63138_leds_enable_led(str
- {
- u32 bit = BIT(led->pin);
-
-- bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit,
-- value == LED_OFF ? 0 : bit);
-+ bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit, value ? bit : 0);
- }
-
- /*
--- /dev/null
+From 13b64a0c19059b38150c79d65d350ae44034c5df Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 17 Jul 2022 14:42:46 +0200
+Subject: [PATCH] dt-bindings: leds: leds-bcm63138: unify full stops in
+ descriptions
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Description of "reg" doesn't have full stop at the end. It makes sense
+as it's a one-sentence only. Use the same style for "active-low".
+
+Reported-by: Pavel Machek <pavel@ucw.cz>
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Pavel Machek <pavel@ucw.cz>
+---
+ Documentation/devicetree/bindings/leds/leds-bcm63138.yaml | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
++++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
+@@ -54,7 +54,7 @@ patternProperties:
+
+ active-low:
+ type: boolean
+- description: Makes LED active low.
++ description: Makes LED active low
+
+ required:
+ - reg
--- /dev/null
+From bcc607cdbb1f931111196699426f0cb83bfb296a Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 17 Jul 2022 14:42:47 +0200
+Subject: [PATCH] leds: add help info about BCM63138 module name
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's what we do for all other LEDs drivers.
+
+Reported-by: Pavel Machek <pavel@ucw.cz>
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Pavel Machek <pavel@ucw.cz>
+---
+ drivers/leds/blink/Kconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/leds/blink/Kconfig
++++ b/drivers/leds/blink/Kconfig
+@@ -10,6 +10,8 @@ config LEDS_BCM63138
+ BCM63138 SoC. The same hardware block is known to be also used
+ in BCM4908, BCM6848, BCM6858, BCM63148, BCM63381 and BCM68360.
+
++ If compiled as module it will be called leds-bcm63138.
++
+ config LEDS_LGM
+ tristate "LED support for LGM SoC series"
+ depends on X86 || COMPILE_TEST
--- /dev/null
+From 92cfc71ee2ddfb499ed53e21b28bdf8739bc70bc Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 17 Jul 2022 14:42:48 +0200
+Subject: [PATCH] leds: leds-bcm63138: get rid of LED_OFF
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The whole "enum led_brightness" is marked as obsolete. Replace it with a
+(non-)zero check.
+
+Reported-by: Pavel Machek <pavel@ucw.cz>
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Pavel Machek <pavel@ucw.cz>
+---
+ drivers/leds/blink/leds-bcm63138.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+--- a/drivers/leds/blink/leds-bcm63138.c
++++ b/drivers/leds/blink/leds-bcm63138.c
+@@ -113,8 +113,7 @@ static void bcm63138_leds_enable_led(str
+ {
+ u32 bit = BIT(led->pin);
+
+- bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit,
+- value == LED_OFF ? 0 : bit);
++ bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit, value ? bit : 0);
+ }
+
+ /*
projects / openwrt / staging / noltari.git / commitdiff