return (ufshcd_readl(hba, REG_CONTROLLER_ENABLE) & 0x1) ? 0 : 1;
}
+u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba)
+{
+ /* HCI version 1.0 and 1.1 supports UniPro 1.41 */
+ if ((hba->ufs_version == UFSHCI_VERSION_10) ||
+ (hba->ufs_version == UFSHCI_VERSION_11))
+ return UFS_UNIPRO_VER_1_41;
+ else
+ return UFS_UNIPRO_VER_1_6;
+}
+EXPORT_SYMBOL(ufshcd_get_local_unipro_ver);
+
+static bool ufshcd_is_unipro_pa_params_tuning_req(struct ufs_hba *hba)
+{
+ /*
+ * If both host and device support UniPro ver1.6 or later, PA layer
+ * parameters tuning happens during link startup itself.
+ *
+ * We can manually tune PA layer parameters if either host or device
+ * doesn't support UniPro ver 1.6 or later. But to keep manual tuning
+ * logic simple, we will only do manual tuning if local unipro version
+ * doesn't support ver1.6 or later.
+ */
+ if (ufshcd_get_local_unipro_ver(hba) < UFS_UNIPRO_VER_1_6)
+ return true;
+ else
+ return false;
+}
+
static void ufshcd_ungate_work(struct work_struct *work)
{
int ret;
}
}
+/**
+ * ufshcd_tune_pa_tactivate - Tunes PA_TActivate of local UniPro
+ * @hba: per-adapter instance
+ *
+ * PA_TActivate parameter can be tuned manually if UniPro version is less than
+ * 1.61. PA_TActivate needs to be greater than or equal to peerM-PHY's
+ * RX_MIN_ACTIVATETIME_CAPABILITY attribute. This optimal value can help reduce
+ * the hibern8 exit latency.
+ *
+ * Returns zero on success, non-zero error value on failure.
+ */
+static int ufshcd_tune_pa_tactivate(struct ufs_hba *hba)
+{
+ int ret = 0;
+ u32 peer_rx_min_activatetime = 0, tuned_pa_tactivate;
+
+ ret = ufshcd_dme_peer_get(hba,
+ UIC_ARG_MIB_SEL(
+ RX_MIN_ACTIVATETIME_CAPABILITY,
+ UIC_ARG_MPHY_RX_GEN_SEL_INDEX(0)),
+ &peer_rx_min_activatetime);
+ if (ret)
+ goto out;
+
+ /* make sure proper unit conversion is applied */
+ tuned_pa_tactivate =
+ ((peer_rx_min_activatetime * RX_MIN_ACTIVATETIME_UNIT_US)
+ / PA_TACTIVATE_TIME_UNIT_US);
+ ret = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TACTIVATE),
+ tuned_pa_tactivate);
+
+out:
+ return ret;
+}
+
+/**
+ * ufshcd_tune_pa_hibern8time - Tunes PA_Hibern8Time of local UniPro
+ * @hba: per-adapter instance
+ *
+ * PA_Hibern8Time parameter can be tuned manually if UniPro version is less than
+ * 1.61. PA_Hibern8Time needs to be maximum of local M-PHY's
+ * TX_HIBERN8TIME_CAPABILITY & peer M-PHY's RX_HIBERN8TIME_CAPABILITY.
+ * This optimal value can help reduce the hibern8 exit latency.
+ *
+ * Returns zero on success, non-zero error value on failure.
+ */
+static int ufshcd_tune_pa_hibern8time(struct ufs_hba *hba)
+{
+ int ret = 0;
+ u32 local_tx_hibern8_time_cap = 0, peer_rx_hibern8_time_cap = 0;
+ u32 max_hibern8_time, tuned_pa_hibern8time;
+
+ ret = ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(TX_HIBERN8TIME_CAPABILITY,
+ UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
+ &local_tx_hibern8_time_cap);
+ if (ret)
+ goto out;
+
+ ret = ufshcd_dme_peer_get(hba,
+ UIC_ARG_MIB_SEL(RX_HIBERN8TIME_CAPABILITY,
+ UIC_ARG_MPHY_RX_GEN_SEL_INDEX(0)),
+ &peer_rx_hibern8_time_cap);
+ if (ret)
+ goto out;
+
+ max_hibern8_time = max(local_tx_hibern8_time_cap,
+ peer_rx_hibern8_time_cap);
+ /* make sure proper unit conversion is applied */
+ tuned_pa_hibern8time = ((max_hibern8_time * HIBERN8TIME_UNIT_US)
+ / PA_HIBERN8_TIME_UNIT_US);
+ ret = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HIBERN8TIME),
+ tuned_pa_hibern8time);
+out:
+ return ret;
+}
+
+static void ufshcd_tune_unipro_params(struct ufs_hba *hba)
+{
+ if (ufshcd_is_unipro_pa_params_tuning_req(hba)) {
+ ufshcd_tune_pa_tactivate(hba);
+ ufshcd_tune_pa_hibern8time(hba);
+ }
+
+ if (hba->dev_quirks & UFS_DEVICE_QUIRK_PA_TACTIVATE)
+ /* set 1ms timeout for PA_TACTIVATE */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TACTIVATE), 10);
+}
+
/**
* ufshcd_probe_hba - probe hba to detect device and initialize
* @hba: per-adapter instance
goto out;
ufs_advertise_fixup_device(hba);
+ ufshcd_tune_unipro_params(hba);
ret = ufshcd_set_vccq_rail_unused(hba,
(hba->dev_quirks & UFS_DEVICE_NO_VCCQ) ? true : false);
/*
* M-TX Configuration Attributes
*/
+#define TX_HIBERN8TIME_CAPABILITY 0x000F
#define TX_MODE 0x0021
#define TX_HSRATE_SERIES 0x0022
#define TX_HSGEAR 0x0023
#define RX_ENTER_HIBERN8 0x00A7
#define RX_BYPASS_8B10B_ENABLE 0x00A8
#define RX_TERMINATION_FORCE_ENABLE 0x0089
+#define RX_MIN_ACTIVATETIME_CAPABILITY 0x008F
+#define RX_HIBERN8TIME_CAPABILITY 0x0092
#define is_mphy_tx_attr(attr) (attr < RX_MODE)
+#define RX_MIN_ACTIVATETIME_UNIT_US 100
+#define HIBERN8TIME_UNIT_US 100
/*
* PHY Adpater attributes
*/
#define PA_STALLNOCONFIGTIME 0x15A3
#define PA_SAVECONFIGTIME 0x15A4
+#define PA_TACTIVATE_TIME_UNIT_US 10
+#define PA_HIBERN8_TIME_UNIT_US 100
+
+/* PHY Adapter Protocol Constants */
+#define PA_MAXDATALANES 4
+
/* PA power modes */
enum {
FAST_MODE = 1,
UFS_HS_G3, /* HS Gear 3 */
};
+enum ufs_unipro_ver {
+ UFS_UNIPRO_VER_RESERVED = 0,
+ UFS_UNIPRO_VER_1_40 = 1, /* UniPro version 1.40 */
+ UFS_UNIPRO_VER_1_41 = 2, /* UniPro version 1.41 */
+ UFS_UNIPRO_VER_1_6 = 3, /* UniPro version 1.6 */
+ UFS_UNIPRO_VER_MAX = 4, /* UniPro unsupported version */
+ /* UniPro version field mask in PA_LOCALVERINFO */
+ UFS_UNIPRO_VER_MASK = 0xF,
+};
+
/*
* Data Link Layer Attributes
*/