Make activation of debug options simpler and add some missing debug symbols.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

diff --git a/config.mk b/config.mk
index 1d197ec2620bbbe8647d16cdcdbc1d16a85b7723..b0f6e44eb5f25315c2b47e6ac212227770e0e93a 100644 (file)
--- a/config.mk
+++ b/config.mk
@@ -74,10 +74,23 @@ endif # kernel Makefile check
 
 # Wireless subsystem stuff
 CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT=y
+# CONFIG_MAC80211_NOINLINE=y
+# CONFIG_MAC80211_VERBOSE_DEBUG=y
+# CONFIG_MAC80211_HT_DEBUG=y
+# CONFIG_MAC80211_TKIP_DEBUG=y
+# CONFIG_MAC80211_IBSS_DEBUG=y
+# CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
+# CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y
+# CONFIG_MAC80211_DEBUG_COUNTERS=y
+# CONFIG_MAC80211_VERBOSE_SPECT_MGMT_DEBUG=y
 
 # choose between pid and minstrel as default rate control algorithm
 CONFIG_MAC80211_RC_DEFAULT=minstrel
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID=y
 # This is the one used by our compat-wireless net/mac80211/rate.c
 # in case you have and old kernel which is overriding this to pid.
 CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel
@@ -89,12 +102,13 @@ CONFIG_MAC80211_LEDS=y
 CONFIG_MAC80211_MESH=y
 
 CONFIG_CFG80211=m
-# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_REG_DEBUG=y
 
 CONFIG_LIB80211=m
 CONFIG_LIB80211_CRYPT_WEP=m
 CONFIG_LIB80211_CRYPT_CCMP=m
 CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG=y
 
 CONFIG_NL80211=y
 
@@ -109,17 +123,17 @@ CONFIG_MAC80211_HWSIM=m
 ifneq ($(CONFIG_PCI),)
 
 CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH5K_DEBUG=y
 CONFIG_ATH9K=m
-# CONFIG_ATH9K_DEBUG is not set
+# CONFIG_ATH9K_DEBUG=y
 
 
 CONFIG_IWLWIFI=m
 CONFIG_IWLWIFI_LEDS=y
 # CONFIG_IWLWIFI_RFKILL=y
 CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
-# CONFIG_IWLWIFI_DEBUG is not set
-# CONFIG_IWLWIFI_DEBUGFS is not set
+# CONFIG_IWLWIFI_DEBUG=y
+# CONFIG_IWLWIFI_DEBUGFS=y
 CONFIG_IWLAGN=m
 CONFIG_IWL4965=y
 CONFIG_IWL5000=y
@@ -134,7 +148,8 @@ CONFIG_B43_PCMCIA=y
 CONFIG_B43_PIO=y
 CONFIG_B43_LEDS=y
 # CONFIG_B43_RFKILL=y
-# CONFIG_B43_DEBUG is not set
+# CONFIG_B43_DEBUG=y
+# CONFIG_B43_FORCE_PIO=y
 
 CONFIG_B43LEGACY=m
 CONFIG_B43LEGACY_PCI_AUTOSELECT=y
@@ -145,22 +160,23 @@ CONFIG_B43LEGACY_LEDS=y
 CONFIG_B43LEGACY_DMA=y
 CONFIG_B43LEGACY_PIO=y
 CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
+# CONFIG_B43LEGACY_DMA_MODE=y
+# CONFIG_B43LEGACY_PIO_MODE=y
 
 # The Intel ipws
 CONFIG_LIBIPW=m
-# CONFIG_LIBIPW_DEBUG is not set
+# CONFIG_LIBIPW_DEBUG=y
+
 
 CONFIG_IPW2100=m
 CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG is not set
+# CONFIG_IPW2100_DEBUG=y
 CONFIG_IPW2200=m
 CONFIG_IPW2200_MONITOR=y
 CONFIG_IPW2200_RADIOTAP=y
 CONFIG_IPW2200_PROMISCUOUS=y
 CONFIG_IPW2200_QOS=y
-# CONFIG_IPW2200_DEBUG is not set
+# CONFIG_IPW2200_DEBUG=y
 # The above enables use a second interface prefixed 'rtap'.
 #           Example usage:
 #
@@ -180,6 +196,7 @@ CONFIG_SSB_PCIHOST=y
 CONFIG_SSB_B43_PCI_BRIDGE=y
 CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 CONFIG_SSB_PCMCIAHOST=y
+# CONFIG_SSB_DEBUG=y
 CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 CONFIG_SSB_DRIVER_PCICORE=y
 
@@ -221,7 +238,7 @@ CONFIG_EEPROM_93CX6=m
 # USB Drivers
 ifneq ($(CONFIG_USB),)
 CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZD1211RW_DEBUG=y
 
 # Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
 
@@ -262,7 +279,8 @@ CONFIG_RT2X00_LIB_FIRMWARE=y
 CONFIG_RT2X00_LIB_CRYPTO=y
 # CONFIG_RT2X00_LIB_RFKILL=y
 CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
+# CONFIG_RT2X00_LIB_DEBUGFS=y
+# CONFIG_RT2X00_DEBUG=y
 endif
 
 ifeq ($(NEED_RT2X00_FIRMWARE),y)
@@ -277,7 +295,7 @@ CONFIG_P54_COMMON=m
 CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=m
 CONFIG_SSB_SPROM=y
-# CONFIG_SSB_DEBUG is not set
+# CONFIG_SSB_DEBUG=y
 
 ifneq ($(CONFIG_USB),)
 ifneq ($(CONFIG_LIBERTAS_THINFIRM_USB),m)