--- /dev/null
+/*
+ * cpu/ppc4xx/40x_spd_sdram.c
+ * This SPD SDRAM detection code supports IBM/AMCC PPC44x cpu with a
+ * SDRAM controller. Those are all current 405 PPC's.
+ *
+ * (C) Copyright 2001
+ * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
+ *
+ * Based on code by:
+ *
+ * Kenneth Johansson ,Ericsson AB.
+ * kenneth.johansson@etx.ericsson.se
+ *
+ * hacked up by bill hunter. fixed so we could run before
+ * serial_init and console_init. previous version avoided this by
+ * running out of cache memory during serial/console init, then running
+ * this code later.
+ *
+ * (C) Copyright 2002
+ * Jun Gu, Artesyn Technology, jung@artesyncp.com
+ * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
+ *
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_440)
+
+/*
+ * Set default values
+ */
+#ifndef CFG_I2C_SPEED
+#define CFG_I2C_SPEED 50000
+#endif
+
+#ifndef CFG_I2C_SLAVE
+#define CFG_I2C_SLAVE 0xFE
+#endif
+
+#define ONE_BILLION 1000000000
+
+#define SDRAM0_CFG_DCE 0x80000000
+#define SDRAM0_CFG_SRE 0x40000000
+#define SDRAM0_CFG_PME 0x20000000
+#define SDRAM0_CFG_MEMCHK 0x10000000
+#define SDRAM0_CFG_REGEN 0x08000000
+#define SDRAM0_CFG_ECCDD 0x00400000
+#define SDRAM0_CFG_EMDULR 0x00200000
+#define SDRAM0_CFG_DRW_SHIFT (31-6)
+#define SDRAM0_CFG_BRPF_SHIFT (31-8)
+
+#define SDRAM0_TR_CASL_SHIFT (31-8)
+#define SDRAM0_TR_PTA_SHIFT (31-13)
+#define SDRAM0_TR_CTP_SHIFT (31-15)
+#define SDRAM0_TR_LDF_SHIFT (31-17)
+#define SDRAM0_TR_RFTA_SHIFT (31-29)
+#define SDRAM0_TR_RCD_SHIFT (31-31)
+
+#define SDRAM0_RTR_SHIFT (31-15)
+#define SDRAM0_ECCCFG_SHIFT (31-11)
+
+/* SDRAM0_CFG enable macro */
+#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT )
+
+#define SDRAM0_BXCR_SZ_MASK 0x000e0000
+#define SDRAM0_BXCR_AM_MASK 0x0000e000
+
+#define SDRAM0_BXCR_SZ_SHIFT (31-14)
+#define SDRAM0_BXCR_AM_SHIFT (31-18)
+
+#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
+#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
+
+#ifdef CONFIG_SPDDRAM_SILENT
+# define SPD_ERR(x) do { return 0; } while (0)
+#else
+# define SPD_ERR(x) do { printf(x); return(0); } while (0)
+#endif
+
+#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
+
+/* function prototypes */
+int spd_read(uint addr);
+
+
+/*
+ * This function is reading data from the DIMM module EEPROM over the SPD bus
+ * and uses that to program the sdram controller.
+ *
+ * This works on boards that has the same schematics that the AMCC walnut has.
+ *
+ * Input: null for default I2C spd functions or a pointer to a custom function
+ * returning spd_data.
+ */
+
+long int spd_sdram(int(read_spd)(uint addr))
+{
+ int tmp,row,col;
+ int total_size,bank_size,bank_code;
+ int ecc_on;
+ int mode;
+ int bank_cnt;
+
+ int sdram0_pmit=0x07c00000;
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ int sdram0_besr0=-1;
+ int sdram0_besr1=-1;
+ int sdram0_eccesr=-1;
+#endif
+ int sdram0_ecccfg;
+
+ int sdram0_rtr=0;
+ int sdram0_tr=0;
+
+ int sdram0_b0cr;
+ int sdram0_b1cr;
+ int sdram0_b2cr;
+ int sdram0_b3cr;
+
+ int sdram0_cfg=0;
+
+ int t_rp;
+ int t_rcd;
+ int t_ras;
+ int t_rc;
+ int min_cas;
+
+ PPC405_SYS_INFO sys_info;
+ unsigned long bus_period_x_10;
+
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+ bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+
+ if (read_spd == 0){
+ read_spd=spd_read;
+ /*
+ * Make sure I2C controller is initialized
+ * before continuing.
+ */
+ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ }
+
+ /* Make shure we are using SDRAM */
+ if (read_spd(2) != 0x04) {
+ SPD_ERR("SDRAM - non SDRAM memory module found\n");
+ }
+
+ /* ------------------------------------------------------------------
+ * configure memory timing register
+ *
+ * data from DIMM:
+ * 27 IN Row Precharge Time ( t RP)
+ * 29 MIN RAS to CAS Delay ( t RCD)
+ * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
+ * -------------------------------------------------------------------*/
+
+ /*
+ * first figure out which cas latency mode to use
+ * use the min supported mode
+ */
+
+ tmp = read_spd(127) & 0x6;
+ if (tmp == 0x02) { /* only cas = 2 supported */
+ min_cas = 2;
+/* t_ck = read_spd(9); */
+/* t_ac = read_spd(10); */
+ } else if (tmp == 0x04) { /* only cas = 3 supported */
+ min_cas = 3;
+/* t_ck = read_spd(9); */
+/* t_ac = read_spd(10); */
+ } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
+ min_cas = 2;
+/* t_ck = read_spd(23); */
+/* t_ac = read_spd(24); */
+ } else {
+ SPD_ERR("SDRAM - unsupported CAS latency \n");
+ }
+
+ /* get some timing values, t_rp,t_rcd,t_ras,t_rc
+ */
+ t_rp = read_spd(27);
+ t_rcd = read_spd(29);
+ t_ras = read_spd(30);
+ t_rc = t_ras + t_rp;
+
+ /* The following timing calcs subtract 1 before deviding.
+ * this has effect of using ceiling instead of floor rounding,
+ * and also subtracting 1 to convert number to reg value
+ */
+ /* set up CASL */
+ sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
+ /* set up PTA */
+ sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT;
+ /* set up CTP */
+ tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3;
+ if (tmp < 1)
+ tmp = 1;
+ sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
+ /* set LDF = 2 cycles, reg value = 1 */
+ sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
+ /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
+ tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3;
+ if (tmp < 0)
+ tmp = 0;
+ if (tmp > 6)
+ tmp = 6;
+ sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
+ /* set RCD = t_rcd/bus_period*/
+ sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ;
+
+
+ /*------------------------------------------------------------------
+ * configure RTR register
+ * -------------------------------------------------------------------*/
+ row = read_spd(3);
+ col = read_spd(4);
+ tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
+ switch (tmp) {
+ case 0x00:
+ tmp = 15625;
+ break;
+ case 0x01:
+ tmp = 15625 / 4;
+ break;
+ case 0x02:
+ tmp = 15625 / 2;
+ break;
+ case 0x03:
+ tmp = 15625 * 2;
+ break;
+ case 0x04:
+ tmp = 15625 * 4;
+ break;
+ case 0x05:
+ tmp = 15625 * 8;
+ break;
+ default:
+ SPD_ERR("SDRAM - Bad refresh period \n");
+ }
+ /* convert from nsec to bus cycles */
+ tmp = (tmp * 10) / bus_period_x_10;
+ sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
+
+ /*------------------------------------------------------------------
+ * determine the number of banks used
+ * -------------------------------------------------------------------*/
+ /* byte 7:6 is module data width */
+ if (read_spd(7) != 0)
+ SPD_ERR("SDRAM - unsupported module width\n");
+ tmp = read_spd(6);
+ if (tmp < 32)
+ SPD_ERR("SDRAM - unsupported module width\n");
+ else if (tmp < 64)
+ bank_cnt = 1; /* one bank per sdram side */
+ else if (tmp < 73)
+ bank_cnt = 2; /* need two banks per side */
+ else if (tmp < 161)
+ bank_cnt = 4; /* need four banks per side */
+ else
+ SPD_ERR("SDRAM - unsupported module width\n");
+
+ /* byte 5 is the module row count (refered to as dimm "sides") */
+ tmp = read_spd(5);
+ if (tmp == 1)
+ ;
+ else if (tmp==2)
+ bank_cnt *= 2;
+ else if (tmp==4)
+ bank_cnt *= 4;
+ else
+ bank_cnt = 8; /* 8 is an error code */
+
+ if (bank_cnt > 4) /* we only have 4 banks to work with */
+ SPD_ERR("SDRAM - unsupported module rows for this width\n");
+
+ /* now check for ECC ability of module. We only support ECC
+ * on 32 bit wide devices with 8 bit ECC.
+ */
+ if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) {
+ sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT;
+ ecc_on = 1;
+ } else {
+ sdram0_ecccfg = 0;
+ ecc_on = 0;
+ }
+
+ /*------------------------------------------------------------------
+ * calculate total size
+ * -------------------------------------------------------------------*/
+ /* calculate total size and do sanity check */
+ tmp = read_spd(31);
+ total_size = 1 << 22; /* total_size = 4MB */
+ /* now multiply 4M by the smallest device row density */
+ /* note that we don't support asymetric rows */
+ while (((tmp & 0x0001) == 0) && (tmp != 0)) {
+ total_size = total_size << 1;
+ tmp = tmp >> 1;
+ }
+ total_size *= read_spd(5); /* mult by module rows (dimm sides) */
+
+ /*------------------------------------------------------------------
+ * map rows * cols * banks to a mode
+ * -------------------------------------------------------------------*/
+
+ switch (row) {
+ case 11:
+ switch (col) {
+ case 8:
+ mode=4; /* mode 5 */
+ break;
+ case 9:
+ case 10:
+ mode=0; /* mode 1 */
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+ break;
+ case 12:
+ switch (col) {
+ case 8:
+ mode=3; /* mode 4 */
+ break;
+ case 9:
+ case 10:
+ mode=1; /* mode 2 */
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+ break;
+ case 13:
+ switch (col) {
+ case 8:
+ mode=5; /* mode 6 */
+ break;
+ case 9:
+ case 10:
+ if (read_spd(17) == 2)
+ mode = 6; /* mode 7 */
+ else
+ mode = 2; /* mode 3 */
+ break;
+ case 11:
+ mode = 2; /* mode 3 */
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+
+ /*------------------------------------------------------------------
+ * using the calculated values, compute the bank
+ * config register values.
+ * -------------------------------------------------------------------*/
+ sdram0_b1cr = 0;
+ sdram0_b2cr = 0;
+ sdram0_b3cr = 0;
+
+ /* compute the size of each bank */
+ bank_size = total_size / bank_cnt;
+ /* convert bank size to bank size code for ppc4xx
+ by takeing log2(bank_size) - 22 */
+ tmp = bank_size; /* start with tmp = bank_size */
+ bank_code = 0; /* and bank_code = 0 */
+ while (tmp > 1) { /* this takes log2 of tmp */
+ bank_code++; /* and stores result in bank_code */
+ tmp = tmp >> 1;
+ } /* bank_code is now log2(bank_size) */
+ bank_code -= 22; /* subtract 22 to get the code */
+
+ tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
+ sdram0_b0cr = (bank_size * 0) | tmp;
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ if (bank_cnt > 1)
+ sdram0_b2cr = (bank_size * 1) | tmp;
+ if (bank_cnt > 2)
+ sdram0_b1cr = (bank_size * 2) | tmp;
+ if (bank_cnt > 3)
+ sdram0_b3cr = (bank_size * 3) | tmp;
+#else
+ /* PPC405EP chip only supports two SDRAM banks */
+ if (bank_cnt > 1)
+ sdram0_b1cr = (bank_size * 1) | tmp;
+ if (bank_cnt > 2)
+ total_size = 2 * bank_size;
+#endif
+
+ /*
+ * enable sdram controller DCE=1
+ * enable burst read prefetch to 32 bytes BRPF=2
+ * leave other functions off
+ */
+
+ /*------------------------------------------------------------------
+ * now that we've done our calculations, we are ready to
+ * program all the registers.
+ * -------------------------------------------------------------------*/
+
+#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
+ /* disable memcontroller so updates work */
+ mtsdram0( mem_mcopt1, 0 );
+
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ mtsdram0( mem_besra , sdram0_besr0 );
+ mtsdram0( mem_besrb , sdram0_besr1 );
+ mtsdram0( mem_ecccf , sdram0_ecccfg );
+ mtsdram0( mem_eccerr, sdram0_eccesr );
+#endif
+ mtsdram0( mem_rtr , sdram0_rtr );
+ mtsdram0( mem_pmit , sdram0_pmit );
+ mtsdram0( mem_mb0cf , sdram0_b0cr );
+ mtsdram0( mem_mb1cf , sdram0_b1cr );
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ mtsdram0( mem_mb2cf , sdram0_b2cr );
+ mtsdram0( mem_mb3cf , sdram0_b3cr );
+#endif
+ mtsdram0( mem_sdtr1 , sdram0_tr );
+
+ /* SDRAM have a power on delay, 500 micro should do */
+ udelay(500);
+ sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
+ if (ecc_on)
+ sdram0_cfg |= SDRAM0_CFG_MEMCHK;
+ mtsdram0(mem_mcopt1, sdram0_cfg);
+
+ return (total_size);
+}
+
+int spd_read(uint addr)
+{
+ uchar data[2];
+
+ if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0)
+ return (int)data[0];
+ else
+ return 0;
+}
+
+#endif /* CONFIG_SPD_EEPROM */
--- /dev/null
+/*
+ * cpu/ppc4xx/44x_spd_ddr.c
+ * This SPD DDR detection code supports IBM/AMCC PPC44x cpu with a
+ * DDR controller. Those are 440GP/GX/EP/GR.
+ *
+ * (C) Copyright 2001
+ * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
+ *
+ * Based on code by:
+ *
+ * Kenneth Johansson ,Ericsson AB.
+ * kenneth.johansson@etx.ericsson.se
+ *
+ * hacked up by bill hunter. fixed so we could run before
+ * serial_init and console_init. previous version avoided this by
+ * running out of cache memory during serial/console init, then running
+ * this code later.
+ *
+ * (C) Copyright 2002
+ * Jun Gu, Artesyn Technology, jung@artesyncp.com
+ * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
+ *
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_SPD_EEPROM) && \
+ (defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR))
+
+/*
+ * Set default values
+ */
+#ifndef CFG_I2C_SPEED
+#define CFG_I2C_SPEED 50000
+#endif
+
+#ifndef CFG_I2C_SLAVE
+#define CFG_I2C_SLAVE 0xFE
+#endif
+
+#define ONE_BILLION 1000000000
+
+/*-----------------------------------------------------------------------------
+ | Memory Controller Options 0
+ +-----------------------------------------------------------------------------*/
+#define SDRAM_CFG0_DCEN 0x80000000 /* SDRAM Controller Enable */
+#define SDRAM_CFG0_MCHK_MASK 0x30000000 /* Memory data errchecking mask */
+#define SDRAM_CFG0_MCHK_NON 0x00000000 /* No ECC generation */
+#define SDRAM_CFG0_MCHK_GEN 0x20000000 /* ECC generation */
+#define SDRAM_CFG0_MCHK_CHK 0x30000000 /* ECC generation and checking */
+#define SDRAM_CFG0_RDEN 0x08000000 /* Registered DIMM enable */
+#define SDRAM_CFG0_PMUD 0x04000000 /* Page management unit */
+#define SDRAM_CFG0_DMWD_MASK 0x02000000 /* DRAM width mask */
+#define SDRAM_CFG0_DMWD_32 0x00000000 /* 32 bits */
+#define SDRAM_CFG0_DMWD_64 0x02000000 /* 64 bits */
+#define SDRAM_CFG0_UIOS_MASK 0x00C00000 /* Unused IO State */
+#define SDRAM_CFG0_PDP 0x00200000 /* Page deallocation policy */
+
+/*-----------------------------------------------------------------------------
+ | Memory Controller Options 1
+ +-----------------------------------------------------------------------------*/
+#define SDRAM_CFG1_SRE 0x80000000 /* Self-Refresh Entry */
+#define SDRAM_CFG1_PMEN 0x40000000 /* Power Management Enable */
+
+/*-----------------------------------------------------------------------------+
+ | SDRAM DEVPOT Options
+ +-----------------------------------------------------------------------------*/
+#define SDRAM_DEVOPT_DLL 0x80000000
+#define SDRAM_DEVOPT_DS 0x40000000
+
+/*-----------------------------------------------------------------------------+
+ | SDRAM MCSTS Options
+ +-----------------------------------------------------------------------------*/
+#define SDRAM_MCSTS_MRSC 0x80000000
+#define SDRAM_MCSTS_SRMS 0x40000000
+#define SDRAM_MCSTS_CIS 0x20000000
+
+/*-----------------------------------------------------------------------------
+ | SDRAM Refresh Timer Register
+ +-----------------------------------------------------------------------------*/
+#define SDRAM_RTR_RINT_MASK 0xFFFF0000
+#define SDRAM_RTR_RINT_ENCODE(n) (((n) << 16) & SDRAM_RTR_RINT_MASK)
+#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
+
+/*-----------------------------------------------------------------------------+
+ | SDRAM UABus Base Address Reg
+ +-----------------------------------------------------------------------------*/
+#define SDRAM_UABBA_UBBA_MASK 0x0000000F
+
+/*-----------------------------------------------------------------------------+
+ | Memory Bank 0-7 configuration
+ +-----------------------------------------------------------------------------*/
+#define SDRAM_BXCR_SDBA_MASK 0xff800000 /* Base address */
+#define SDRAM_BXCR_SDSZ_MASK 0x000e0000 /* Size */
+#define SDRAM_BXCR_SDSZ_8 0x00020000 /* 8M */
+#define SDRAM_BXCR_SDSZ_16 0x00040000 /* 16M */
+#define SDRAM_BXCR_SDSZ_32 0x00060000 /* 32M */
+#define SDRAM_BXCR_SDSZ_64 0x00080000 /* 64M */
+#define SDRAM_BXCR_SDSZ_128 0x000a0000 /* 128M */
+#define SDRAM_BXCR_SDSZ_256 0x000c0000 /* 256M */
+#define SDRAM_BXCR_SDSZ_512 0x000e0000 /* 512M */
+#define SDRAM_BXCR_SDAM_MASK 0x0000e000 /* Addressing mode */
+#define SDRAM_BXCR_SDAM_1 0x00000000 /* Mode 1 */
+#define SDRAM_BXCR_SDAM_2 0x00002000 /* Mode 2 */
+#define SDRAM_BXCR_SDAM_3 0x00004000 /* Mode 3 */
+#define SDRAM_BXCR_SDAM_4 0x00006000 /* Mode 4 */
+#define SDRAM_BXCR_SDBE 0x00000001 /* Memory Bank Enable */
+
+/*-----------------------------------------------------------------------------+
+ | SDRAM TR0 Options
+ +-----------------------------------------------------------------------------*/
+#define SDRAM_TR0_SDWR_MASK 0x80000000
+#define SDRAM_TR0_SDWR_2_CLK 0x00000000
+#define SDRAM_TR0_SDWR_3_CLK 0x80000000
+#define SDRAM_TR0_SDWD_MASK 0x40000000
+#define SDRAM_TR0_SDWD_0_CLK 0x00000000
+#define SDRAM_TR0_SDWD_1_CLK 0x40000000
+#define SDRAM_TR0_SDCL_MASK 0x01800000
+#define SDRAM_TR0_SDCL_2_0_CLK 0x00800000
+#define SDRAM_TR0_SDCL_2_5_CLK 0x01000000
+#define SDRAM_TR0_SDCL_3_0_CLK 0x01800000
+#define SDRAM_TR0_SDPA_MASK 0x000C0000
+#define SDRAM_TR0_SDPA_2_CLK 0x00040000
+#define SDRAM_TR0_SDPA_3_CLK 0x00080000
+#define SDRAM_TR0_SDPA_4_CLK 0x000C0000
+#define SDRAM_TR0_SDCP_MASK 0x00030000
+#define SDRAM_TR0_SDCP_2_CLK 0x00000000
+#define SDRAM_TR0_SDCP_3_CLK 0x00010000
+#define SDRAM_TR0_SDCP_4_CLK 0x00020000
+#define SDRAM_TR0_SDCP_5_CLK 0x00030000
+#define SDRAM_TR0_SDLD_MASK 0x0000C000
+#define SDRAM_TR0_SDLD_1_CLK 0x00000000
+#define SDRAM_TR0_SDLD_2_CLK 0x00004000
+#define SDRAM_TR0_SDRA_MASK 0x0000001C
+#define SDRAM_TR0_SDRA_6_CLK 0x00000000
+#define SDRAM_TR0_SDRA_7_CLK 0x00000004
+#define SDRAM_TR0_SDRA_8_CLK 0x00000008
+#define SDRAM_TR0_SDRA_9_CLK 0x0000000C
+#define SDRAM_TR0_SDRA_10_CLK 0x00000010
+#define SDRAM_TR0_SDRA_11_CLK 0x00000014
+#define SDRAM_TR0_SDRA_12_CLK 0x00000018
+#define SDRAM_TR0_SDRA_13_CLK 0x0000001C
+#define SDRAM_TR0_SDRD_MASK 0x00000003
+#define SDRAM_TR0_SDRD_2_CLK 0x00000001
+#define SDRAM_TR0_SDRD_3_CLK 0x00000002
+#define SDRAM_TR0_SDRD_4_CLK 0x00000003
+
+/*-----------------------------------------------------------------------------+
+ | SDRAM TR1 Options
+ +-----------------------------------------------------------------------------*/
+#define SDRAM_TR1_RDSS_MASK 0xC0000000
+#define SDRAM_TR1_RDSS_TR0 0x00000000
+#define SDRAM_TR1_RDSS_TR1 0x40000000
+#define SDRAM_TR1_RDSS_TR2 0x80000000
+#define SDRAM_TR1_RDSS_TR3 0xC0000000
+#define SDRAM_TR1_RDSL_MASK 0x00C00000
+#define SDRAM_TR1_RDSL_STAGE1 0x00000000
+#define SDRAM_TR1_RDSL_STAGE2 0x00400000
+#define SDRAM_TR1_RDSL_STAGE3 0x00800000
+#define SDRAM_TR1_RDCD_MASK 0x00000800
+#define SDRAM_TR1_RDCD_RCD_0_0 0x00000000
+#define SDRAM_TR1_RDCD_RCD_1_2 0x00000800
+#define SDRAM_TR1_RDCT_MASK 0x000001FF
+#define SDRAM_TR1_RDCT_ENCODE(x) (((x) << 0) & SDRAM_TR1_RDCT_MASK)
+#define SDRAM_TR1_RDCT_DECODE(x) (((x) & SDRAM_TR1_RDCT_MASK) >> 0)
+#define SDRAM_TR1_RDCT_MIN 0x00000000
+#define SDRAM_TR1_RDCT_MAX 0x000001FF
+
+/*-----------------------------------------------------------------------------+
+ | SDRAM WDDCTR Options
+ +-----------------------------------------------------------------------------*/
+#define SDRAM_WDDCTR_WRCP_MASK 0xC0000000
+#define SDRAM_WDDCTR_WRCP_0DEG 0x00000000
+#define SDRAM_WDDCTR_WRCP_90DEG 0x40000000
+#define SDRAM_WDDCTR_WRCP_180DEG 0x80000000
+#define SDRAM_WDDCTR_DCD_MASK 0x000001FF
+
+/*-----------------------------------------------------------------------------+
+ | SDRAM CLKTR Options
+ +-----------------------------------------------------------------------------*/
+#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
+#define SDRAM_CLKTR_CLKP_0DEG 0x00000000
+#define SDRAM_CLKTR_CLKP_90DEG 0x40000000
+#define SDRAM_CLKTR_CLKP_180DEG 0x80000000
+#define SDRAM_CLKTR_DCDT_MASK 0x000001FF
+
+/*-----------------------------------------------------------------------------+
+ | SDRAM DLYCAL Options
+ +-----------------------------------------------------------------------------*/
+#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
+#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
+#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
+
+/*-----------------------------------------------------------------------------+
+ | General Definition
+ +-----------------------------------------------------------------------------*/
+#define DEFAULT_SPD_ADDR1 0x53
+#define DEFAULT_SPD_ADDR2 0x52
+#define MAXBANKS 4 /* at most 4 dimm banks */
+#define MAX_SPD_BYTES 256
+#define NUMHALFCYCLES 4
+#define NUMMEMTESTS 8
+#define NUMMEMWORDS 8
+#define MAXBXCR 4
+#define TRUE 1
+#define FALSE 0
+
+const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
+ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF},
+ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000},
+ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555},
+ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA},
+ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A},
+ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5},
+ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA},
+ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55}
+};
+
+/* bank_parms is used to sort the bank sizes by descending order */
+struct bank_param {
+ unsigned long cr;
+ unsigned long bank_size_bytes;
+};
+
+typedef struct bank_param BANKPARMS;
+
+#ifdef CFG_SIMULATE_SPD_EEPROM
+extern unsigned char cfg_simulate_spd_eeprom[128];
+#endif
+
+unsigned char spd_read(uchar chip, uint addr);
+
+void get_spd_info(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+
+void check_mem_type
+(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+
+void check_volt_type
+(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+
+void program_cfg0(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+
+void program_cfg1(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+
+void program_rtr (unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+
+void program_tr0 (unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+
+void program_tr1 (void);
+
+void program_ecc (unsigned long num_bytes);
+
+unsigned
+long program_bxcr(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+
+/*
+ * This function is reading data from the DIMM module EEPROM over the SPD bus
+ * and uses that to program the sdram controller.
+ *
+ * This works on boards that has the same schematics that the AMCC walnut has.
+ *
+ * BUG: Don't handle ECC memory
+ * BUG: A few values in the TR register is currently hardcoded
+ */
+
+long int spd_sdram(void) {
+ unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
+ unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
+ unsigned long total_size;
+ unsigned long cfg0;
+ unsigned long mcsts;
+ unsigned long num_dimm_banks; /* on board dimm banks */
+
+ num_dimm_banks = sizeof(iic0_dimm_addr);
+
+ /*
+ * Make sure I2C controller is initialized
+ * before continuing.
+ */
+ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+ /*
+ * Read the SPD information using I2C interface. Check to see if the
+ * DIMM slots are populated.
+ */
+ get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * Check the memory type for the dimms plugged.
+ */
+ check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * Check the voltage type for the dimms plugged.
+ */
+ check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+ /*
+ * Soft-reset SDRAM controller.
+ */
+ mtsdr(sdr_srst, SDR0_SRST_DMC);
+ mtsdr(sdr_srst, 0x00000000);
+#endif
+
+ /*
+ * program 440GP SDRAM controller options (SDRAM0_CFG0)
+ */
+ program_cfg0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * program 440GP SDRAM controller options (SDRAM0_CFG1)
+ */
+ program_cfg1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * program SDRAM refresh register (SDRAM0_RTR)
+ */
+ program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * program SDRAM Timing Register 0 (SDRAM0_TR0)
+ */
+ program_tr0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * program the BxCR registers to find out total sdram installed
+ */
+ total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
+ num_dimm_banks);
+
+ /*
+ * program SDRAM Clock Timing Register (SDRAM0_CLKTR)
+ */
+ mtsdram(mem_clktr, 0x40000000);
+
+ /*
+ * delay to ensure 200 usec has elapsed
+ */
+ udelay(400);
+
+ /*
+ * enable the memory controller
+ */
+ mfsdram(mem_cfg0, cfg0);
+ mtsdram(mem_cfg0, cfg0 | SDRAM_CFG0_DCEN);
+
+ /*
+ * wait for SDRAM_CFG0_DC_EN to complete
+ */
+ while (1) {
+ mfsdram(mem_mcsts, mcsts);
+ if ((mcsts & SDRAM_MCSTS_MRSC) != 0) {
+ break;
+ }
+ }
+
+ /*
+ * program SDRAM Timing Register 1, adding some delays
+ */
+ program_tr1();
+
+ /*
+ * if ECC is enabled, initialize parity bits
+ */
+
+ return total_size;
+}
+
+unsigned char spd_read(uchar chip, uint addr)
+{
+ unsigned char data[2];
+
+#ifdef CFG_SIMULATE_SPD_EEPROM
+ if (chip == CFG_SIMULATE_SPD_EEPROM) {
+ /*
+ * Onboard spd eeprom requested -> simulate values
+ */
+ return cfg_simulate_spd_eeprom[addr];
+ }
+#endif /* CFG_SIMULATE_SPD_EEPROM */
+
+ if (i2c_probe(chip) == 0) {
+ if (i2c_read(chip, addr, 1, data, 1) == 0) {
+ return data[0];
+ }
+ }
+
+ return 0;
+}
+
+void get_spd_info(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_found;
+ unsigned char num_of_bytes;
+ unsigned char total_size;
+
+ dimm_found = FALSE;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ num_of_bytes = 0;
+ total_size = 0;
+
+ num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
+ total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
+
+ if ((num_of_bytes != 0) && (total_size != 0)) {
+ dimm_populated[dimm_num] = TRUE;
+ dimm_found = TRUE;
+#if 0
+ printf("DIMM slot %lu: populated\n", dimm_num);
+#endif
+ } else {
+ dimm_populated[dimm_num] = FALSE;
+#if 0
+ printf("DIMM slot %lu: Not populated\n", dimm_num);
+#endif
+ }
+ }
+
+ if (dimm_found == FALSE) {
+ printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
+ hang();
+ }
+}
+
+void check_mem_type(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned char dimm_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
+ switch (dimm_type) {
+ case 7:
+#if 0
+ printf("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
+#endif
+ break;
+ default:
+ printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
+ dimm_num);
+ printf("Only DDR SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ break;
+ }
+ }
+ }
+}
+
+
+void check_volt_type(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long voltage_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
+ if (voltage_type != 0x04) {
+ printf("ERROR: DIMM %lu with unsupported voltage level.\n",
+ dimm_num);
+ hang();
+ } else {
+#if 0
+ printf("DIMM %lu voltage level supported.\n", dimm_num);
+#endif
+ }
+ break;
+ }
+ }
+}
+
+void program_cfg0(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long cfg0;
+ unsigned long ecc_enabled;
+ unsigned char ecc;
+ unsigned char attributes;
+ unsigned long data_width;
+ unsigned long dimm_32bit;
+ unsigned long dimm_64bit;
+
+ /*
+ * get Memory Controller Options 0 data
+ */
+ mfsdram(mem_cfg0, cfg0);
+
+ /*
+ * clear bits
+ */
+ cfg0 &= ~(SDRAM_CFG0_DCEN | SDRAM_CFG0_MCHK_MASK |
+ SDRAM_CFG0_RDEN | SDRAM_CFG0_PMUD |
+ SDRAM_CFG0_DMWD_MASK |
+ SDRAM_CFG0_UIOS_MASK | SDRAM_CFG0_PDP);
+
+
+ /*
+ * FIXME: assume the DDR SDRAMs in both banks are the same
+ */
+ ecc_enabled = TRUE;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
+ if (ecc != 0x02) {
+ ecc_enabled = FALSE;
+ }
+
+ /*
+ * program Registered DIMM Enable
+ */
+ attributes = spd_read(iic0_dimm_addr[dimm_num], 21);
+ if ((attributes & 0x02) != 0x00) {
+ cfg0 |= SDRAM_CFG0_RDEN;
+ }
+
+ /*
+ * program DDR SDRAM Data Width
+ */
+ data_width =
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) +
+ (((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8);
+ if (data_width == 64 || data_width == 72) {
+ dimm_64bit = TRUE;
+ cfg0 |= SDRAM_CFG0_DMWD_64;
+ } else if (data_width == 32 || data_width == 40) {
+ dimm_32bit = TRUE;
+ cfg0 |= SDRAM_CFG0_DMWD_32;
+ } else {
+ printf("WARNING: DIMM with datawidth of %lu bits.\n",
+ data_width);
+ printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
+ hang();
+ }
+ break;
+ }
+ }
+
+ /*
+ * program Memory Data Error Checking
+ */
+ if (ecc_enabled == TRUE) {
+ cfg0 |= SDRAM_CFG0_MCHK_GEN;
+ } else {
+ cfg0 |= SDRAM_CFG0_MCHK_NON;
+ }
+
+ /*
+ * program Page Management Unit (0 == enabled)
+ */
+ cfg0 &= ~SDRAM_CFG0_PMUD;
+
+ /*
+ * program Memory Controller Options 0
+ * Note: DCEN must be enabled after all DDR SDRAM controller
+ * configuration registers get initialized.
+ */
+ mtsdram(mem_cfg0, cfg0);
+}
+
+void program_cfg1(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long cfg1;
+ mfsdram(mem_cfg1, cfg1);
+
+ /*
+ * Self-refresh exit, disable PM
+ */
+ cfg1 &= ~(SDRAM_CFG1_SRE | SDRAM_CFG1_PMEN);
+
+ /*
+ * program Memory Controller Options 1
+ */
+ mtsdram(mem_cfg1, cfg1);
+}
+
+void program_rtr (unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long bus_period_x_10;
+ unsigned long refresh_rate = 0;
+ unsigned char refresh_rate_type;
+ unsigned long refresh_interval;
+ unsigned long sdram_rtr;
+ PPC440_SYS_INFO sys_info;
+
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+ bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
+ switch (refresh_rate_type) {
+ case 0x00:
+ refresh_rate = 15625;
+ break;
+ case 0x01:
+ refresh_rate = 15625/4;
+ break;
+ case 0x02:
+ refresh_rate = 15625/2;
+ break;
+ case 0x03:
+ refresh_rate = 15626*2;
+ break;
+ case 0x04:
+ refresh_rate = 15625*4;
+ break;
+ case 0x05:
+ refresh_rate = 15625*8;
+ break;
+ default:
+ printf("ERROR: DIMM %lu, unsupported refresh rate/type.\n",
+ dimm_num);
+ printf("Replace the DIMM module with a supported DIMM.\n");
+ break;
+ }
+
+ break;
+ }
+ }
+
+ refresh_interval = refresh_rate * 10 / bus_period_x_10;
+ sdram_rtr = (refresh_interval & 0x3ff8) << 16;
+
+ /*
+ * program Refresh Timer Register (SDRAM0_RTR)
+ */
+ mtsdram(mem_rtr, sdram_rtr);
+}
+
+void program_tr0 (unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long tr0;
+ unsigned char wcsbc;
+ unsigned char t_rp_ns;
+ unsigned char t_rcd_ns;
+ unsigned char t_ras_ns;
+ unsigned long t_rp_clk;
+ unsigned long t_ras_rcd_clk;
+ unsigned long t_rcd_clk;
+ unsigned long t_rfc_clk;
+ unsigned long plb_check;
+ unsigned char cas_bit;
+ unsigned long cas_index;
+ unsigned char cas_2_0_available;
+ unsigned char cas_2_5_available;
+ unsigned char cas_3_0_available;
+ unsigned long cycle_time_ns_x_10[3];
+ unsigned long tcyc_3_0_ns_x_10;
+ unsigned long tcyc_2_5_ns_x_10;
+ unsigned long tcyc_2_0_ns_x_10;
+ unsigned long tcyc_reg;
+ unsigned long bus_period_x_10;
+ PPC440_SYS_INFO sys_info;
+ unsigned long residue;
+
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+ bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+
+ /*
+ * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
+ */
+ mfsdram(mem_tr0, tr0);
+ tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
+ SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
+ SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
+ SDRAM_TR0_SDRA_MASK | SDRAM_TR0_SDRD_MASK);
+
+ /*
+ * initialization
+ */
+ wcsbc = 0;
+ t_rp_ns = 0;
+ t_rcd_ns = 0;
+ t_ras_ns = 0;
+ cas_2_0_available = TRUE;
+ cas_2_5_available = TRUE;
+ cas_3_0_available = TRUE;
+ tcyc_2_0_ns_x_10 = 0;
+ tcyc_2_5_ns_x_10 = 0;
+ tcyc_3_0_ns_x_10 = 0;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
+ t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
+ t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
+ t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
+ cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
+
+ for (cas_index = 0; cas_index < 3; cas_index++) {
+ switch (cas_index) {
+ case 0:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
+ break;
+ case 1:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
+ break;
+ default:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
+ break;
+ }
+
+ if ((tcyc_reg & 0x0F) >= 10) {
+ printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
+ dimm_num);
+ hang();
+ }
+
+ cycle_time_ns_x_10[cas_index] =
+ (((tcyc_reg & 0xF0) >> 4) * 10) + (tcyc_reg & 0x0F);
+ }
+
+ cas_index = 0;
+
+ if ((cas_bit & 0x80) != 0) {
+ cas_index += 3;
+ } else if ((cas_bit & 0x40) != 0) {
+ cas_index += 2;
+ } else if ((cas_bit & 0x20) != 0) {
+ cas_index += 1;
+ }
+
+ if (((cas_bit & 0x10) != 0) && (cas_index < 3)) {
+ tcyc_3_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
+ cas_index++;
+ } else {
+ if (cas_index != 0) {
+ cas_index++;
+ }
+ cas_3_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
+ tcyc_2_5_ns_x_10 = cycle_time_ns_x_10[cas_index];
+ cas_index++;
+ } else {
+ if (cas_index != 0) {
+ cas_index++;
+ }
+ cas_2_5_available = FALSE;
+ }
+
+ if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
+ tcyc_2_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
+ cas_index++;
+ } else {
+ if (cas_index != 0) {
+ cas_index++;
+ }
+ cas_2_0_available = FALSE;
+ }
+
+ break;
+ }
+ }
+
+ /*
+ * Program SD_WR and SD_WCSBC fields
+ */
+ tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */
+ switch (wcsbc) {
+ case 0:
+ tr0 |= SDRAM_TR0_SDWD_0_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDWD_1_CLK;
+ break;
+ }
+
+ /*
+ * Program SD_CASL field
+ */
+ if ((cas_2_0_available == TRUE) &&
+ (bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
+ tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
+ } else if ((cas_2_5_available == TRUE) &&
+ (bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
+ tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
+ } else if ((cas_3_0_available == TRUE) &&
+ (bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
+ tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
+ } else {
+ printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
+ printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
+ printf("Make sure the PLB speed is within the supported range.\n");
+ hang();
+ }
+
+ /*
+ * Calculate Trp in clock cycles and round up if necessary
+ * Program SD_PTA field
+ */
+ t_rp_clk = sys_info.freqPLB * t_rp_ns / ONE_BILLION;
+ plb_check = ONE_BILLION * t_rp_clk / t_rp_ns;
+ if (sys_info.freqPLB != plb_check) {
+ t_rp_clk++;
+ }
+ switch ((unsigned long)t_rp_clk) {
+ case 0:
+ case 1:
+ case 2:
+ tr0 |= SDRAM_TR0_SDPA_2_CLK;
+ break;
+ case 3:
+ tr0 |= SDRAM_TR0_SDPA_3_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDPA_4_CLK;
+ break;
+ }
+
+ /*
+ * Program SD_CTP field
+ */
+ t_ras_rcd_clk = sys_info.freqPLB * (t_ras_ns - t_rcd_ns) / ONE_BILLION;
+ plb_check = ONE_BILLION * t_ras_rcd_clk / (t_ras_ns - t_rcd_ns);
+ if (sys_info.freqPLB != plb_check) {
+ t_ras_rcd_clk++;
+ }
+ switch (t_ras_rcd_clk) {
+ case 0:
+ case 1:
+ case 2:
+ tr0 |= SDRAM_TR0_SDCP_2_CLK;
+ break;
+ case 3:
+ tr0 |= SDRAM_TR0_SDCP_3_CLK;
+ break;
+ case 4:
+ tr0 |= SDRAM_TR0_SDCP_4_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDCP_5_CLK;
+ break;
+ }
+
+ /*
+ * Program SD_LDF field
+ */
+ tr0 |= SDRAM_TR0_SDLD_2_CLK;
+
+ /*
+ * Program SD_RFTA field
+ * FIXME tRFC hardcoded as 75 nanoseconds
+ */
+ t_rfc_clk = sys_info.freqPLB / (ONE_BILLION / 75);
+ residue = sys_info.freqPLB % (ONE_BILLION / 75);
+ if (residue >= (ONE_BILLION / 150)) {
+ t_rfc_clk++;
+ }
+ switch (t_rfc_clk) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ case 6:
+ tr0 |= SDRAM_TR0_SDRA_6_CLK;
+ break;
+ case 7:
+ tr0 |= SDRAM_TR0_SDRA_7_CLK;
+ break;
+ case 8:
+ tr0 |= SDRAM_TR0_SDRA_8_CLK;
+ break;
+ case 9:
+ tr0 |= SDRAM_TR0_SDRA_9_CLK;
+ break;
+ case 10:
+ tr0 |= SDRAM_TR0_SDRA_10_CLK;
+ break;
+ case 11:
+ tr0 |= SDRAM_TR0_SDRA_11_CLK;
+ break;
+ case 12:
+ tr0 |= SDRAM_TR0_SDRA_12_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDRA_13_CLK;
+ break;
+ }
+
+ /*
+ * Program SD_RCD field
+ */
+ t_rcd_clk = sys_info.freqPLB * t_rcd_ns / ONE_BILLION;
+ plb_check = ONE_BILLION * t_rcd_clk / t_rcd_ns;
+ if (sys_info.freqPLB != plb_check) {
+ t_rcd_clk++;
+ }
+ switch (t_rcd_clk) {
+ case 0:
+ case 1:
+ case 2:
+ tr0 |= SDRAM_TR0_SDRD_2_CLK;
+ break;
+ case 3:
+ tr0 |= SDRAM_TR0_SDRD_3_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDRD_4_CLK;
+ break;
+ }
+
+#if 0
+ printf("tr0: %x\n", tr0);
+#endif
+ mtsdram(mem_tr0, tr0);
+}
+
+void program_tr1 (void)
+{
+ unsigned long tr0;
+ unsigned long tr1;
+ unsigned long cfg0;
+ unsigned long ecc_temp;
+ unsigned long dlycal;
+ unsigned long dly_val;
+ unsigned long i, j, k;
+ unsigned long bxcr_num;
+ unsigned long max_pass_length;
+ unsigned long current_pass_length;
+ unsigned long current_fail_length;
+ unsigned long current_start;
+ unsigned long rdclt;
+ unsigned long rdclt_offset;
+ long max_start;
+ long max_end;
+ long rdclt_average;
+ unsigned char window_found;
+ unsigned char fail_found;
+ unsigned char pass_found;
+ unsigned long * membase;
+ PPC440_SYS_INFO sys_info;
+
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+
+ /*
+ * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
+ */
+ mfsdram(mem_tr1, tr1);
+ tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
+ SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
+
+ mfsdram(mem_tr0, tr0);
+ if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
+ (sys_info.freqPLB > 100000000)) {
+ tr1 |= SDRAM_TR1_RDSS_TR2;
+ tr1 |= SDRAM_TR1_RDSL_STAGE3;
+ tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
+ } else {
+ tr1 |= SDRAM_TR1_RDSS_TR1;
+ tr1 |= SDRAM_TR1_RDSL_STAGE2;
+ tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
+ }
+
+ /*
+ * save CFG0 ECC setting to a temporary variable and turn ECC off
+ */
+ mfsdram(mem_cfg0, cfg0);
+ ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
+ mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
+
+ /*
+ * get the delay line calibration register value
+ */
+ mfsdram(mem_dlycal, dlycal);
+ dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
+
+ max_pass_length = 0;
+ max_start = 0;
+ max_end = 0;
+ current_pass_length = 0;
+ current_fail_length = 0;
+ current_start = 0;
+ rdclt_offset = 0;
+ window_found = FALSE;
+ fail_found = FALSE;
+ pass_found = FALSE;
+#ifdef DEBUG
+ printf("Starting memory test ");
+#endif
+ for (k = 0; k < NUMHALFCYCLES; k++) {
+ for (rdclt = 0; rdclt < dly_val; rdclt++) {
+ /*
+ * Set the timing reg for the test.
+ */
+ mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
+
+ for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
+ mtdcr(memcfga, mem_b0cr + (bxcr_num<<2));
+ if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
+ /* Bank is enabled */
+ membase = (unsigned long*)
+ (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK);
+
+ /*
+ * Run the short memory test
+ */
+ for (i = 0; i < NUMMEMTESTS; i++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ membase[j] = test[i][j];
+ ppcDcbf((unsigned long)&(membase[j]));
+ }
+
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (membase[j] != test[i][j]) {
+ ppcDcbf((unsigned long)&(membase[j]));
+ break;
+ }
+ ppcDcbf((unsigned long)&(membase[j]));
+ }
+
+ if (j < NUMMEMWORDS) {
+ break;
+ }
+ }
+
+ /*
+ * see if the rdclt value passed
+ */
+ if (i < NUMMEMTESTS) {
+ break;
+ }
+ }
+ }
+
+ if (bxcr_num == MAXBXCR) {
+ if (fail_found == TRUE) {
+ pass_found = TRUE;
+ if (current_pass_length == 0) {
+ current_start = rdclt_offset + rdclt;
+ }
+
+ current_fail_length = 0;
+ current_pass_length++;
+
+ if (current_pass_length > max_pass_length) {
+ max_pass_length = current_pass_length;
+ max_start = current_start;
+ max_end = rdclt_offset + rdclt;
+ }
+ }
+ } else {
+ current_pass_length = 0;
+ current_fail_length++;
+
+ if (current_fail_length >= (dly_val>>2)) {
+ if (fail_found == FALSE) {
+ fail_found = TRUE;
+ } else if (pass_found == TRUE) {
+ window_found = TRUE;
+ break;
+ }
+ }
+ }
+ }
+#ifdef DEBUG
+ printf(".");
+#endif
+ if (window_found == TRUE) {
+ break;
+ }
+
+ tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
+ rdclt_offset += dly_val;
+ }
+#ifdef DEBUG
+ printf("\n");
+#endif
+
+ /*
+ * make sure we find the window
+ */
+ if (window_found == FALSE) {
+ printf("ERROR: Cannot determine a common read delay.\n");
+ hang();
+ }
+
+ /*
+ * restore the orignal ECC setting
+ */
+ mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
+
+ /*
+ * set the SDRAM TR1 RDCD value
+ */
+ tr1 &= ~SDRAM_TR1_RDCD_MASK;
+ if ((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) {
+ tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
+ } else {
+ tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
+ }
+
+ /*
+ * set the SDRAM TR1 RDCLT value
+ */
+ tr1 &= ~SDRAM_TR1_RDCT_MASK;
+ while (max_end >= (dly_val << 1)) {
+ max_end -= (dly_val << 1);
+ max_start -= (dly_val << 1);
+ }
+
+ rdclt_average = ((max_start + max_end) >> 1);
+ if (rdclt_average >= 0x60)
+ while (1)
+ ;
+
+ if (rdclt_average < 0) {
+ rdclt_average = 0;
+ }
+
+ if (rdclt_average >= dly_val) {
+ rdclt_average -= dly_val;
+ tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
+ }
+ tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
+
+#if 0
+ printf("tr1: %x\n", tr1);
+#endif
+ /*
+ * program SDRAM Timing Register 1 TR1
+ */
+ mtsdram(mem_tr1, tr1);
+}
+
+unsigned long program_bxcr(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long bank_base_addr;
+ unsigned long cr;
+ unsigned long i;
+ unsigned long j;
+ unsigned long temp;
+ unsigned char num_row_addr;
+ unsigned char num_col_addr;
+ unsigned char num_banks;
+ unsigned char bank_size_id;
+ unsigned long ctrl_bank_num[MAXBANKS];
+ unsigned long bx_cr_num;
+ unsigned long largest_size_index;
+ unsigned long largest_size;
+ unsigned long current_size_index;
+ BANKPARMS bank_parms[MAXBXCR];
+ unsigned long sorted_bank_num[MAXBXCR]; /* DDR Controller bank number table (sorted by size) */
+ unsigned long sorted_bank_size[MAXBXCR]; /* DDR Controller bank size table (sorted by size)*/
+
+ /*
+ * Set the BxCR regs. First, wipe out the bank config registers.
+ */
+ for (bx_cr_num = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
+ mtdcr(memcfga, mem_b0cr + (bx_cr_num << 2));
+ mtdcr(memcfgd, 0x00000000);
+ bank_parms[bx_cr_num].bank_size_bytes = 0;
+ }
+
+#ifdef CONFIG_BAMBOO
+ /*
+ * This next section is hardware dependent and must be programmed
+ * to match the hardware. For bammboo, the following holds...
+ * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0
+ * 2. SDRAM0_B1CR: Bank 0 of dimm 1 ctrl_bank_num : 1
+ * 3. SDRAM0_B2CR: Bank 1 of dimm 1 ctrl_bank_num : 1
+ * 4. SDRAM0_B3CR: Bank 0 of dimm 2 ctrl_bank_num : 3
+ * ctrl_bank_num corresponds to the first usable DDR controller bank number by DIMM
+ */
+ ctrl_bank_num[0] = 0;
+ ctrl_bank_num[1] = 1;
+ ctrl_bank_num[2] = 3;
+#else
+ ctrl_bank_num[0] = 0;
+ ctrl_bank_num[1] = 1;
+ ctrl_bank_num[2] = 2;
+ ctrl_bank_num[3] = 3;
+#endif
+
+ /*
+ * reset the bank_base address
+ */
+ bank_base_addr = CFG_SDRAM_BASE;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
+ num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
+ num_banks = spd_read(iic0_dimm_addr[dimm_num], 5);
+ bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
+
+ /*
+ * Set the SDRAM0_BxCR regs
+ */
+ cr = 0;
+ switch (bank_size_id) {
+ case 0x02:
+ cr |= SDRAM_BXCR_SDSZ_8;
+ break;
+ case 0x04:
+ cr |= SDRAM_BXCR_SDSZ_16;
+ break;
+ case 0x08:
+ cr |= SDRAM_BXCR_SDSZ_32;
+ break;
+ case 0x10:
+ cr |= SDRAM_BXCR_SDSZ_64;
+ break;
+ case 0x20:
+ cr |= SDRAM_BXCR_SDSZ_128;
+ break;
+ case 0x40:
+ cr |= SDRAM_BXCR_SDSZ_256;
+ break;
+ case 0x80:
+ cr |= SDRAM_BXCR_SDSZ_512;
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
+ dimm_num);
+ printf("ERROR: Unsupported value for the banksize: %d.\n",
+ bank_size_id);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ }
+
+ switch (num_col_addr) {
+ case 0x08:
+ cr |= SDRAM_BXCR_SDAM_1;
+ break;
+ case 0x09:
+ cr |= SDRAM_BXCR_SDAM_2;
+ break;
+ case 0x0A:
+ cr |= SDRAM_BXCR_SDAM_3;
+ break;
+ case 0x0B:
+ cr |= SDRAM_BXCR_SDAM_4;
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
+ dimm_num);
+ printf("ERROR: Unsupported value for number of "
+ "column addresses: %d.\n", num_col_addr);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ }
+
+ /*
+ * enable the bank
+ */
+ cr |= SDRAM_BXCR_SDBE;
+
+ for (i = 0; i < num_banks; i++) {
+ bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
+ (4 * 1024 * 1024) * bank_size_id;
+ bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
+ }
+ }
+ }
+
+ /* Initialize sort tables */
+ for (i = 0; i < MAXBXCR; i++) {
+ sorted_bank_num[i] = i;
+ sorted_bank_size[i] = bank_parms[i].bank_size_bytes;
+ }
+
+ for (i = 0; i < MAXBXCR-1; i++) {
+ largest_size = sorted_bank_size[i];
+ largest_size_index = 255;
+
+ /* Find the largest remaining value */
+ for (j = i + 1; j < MAXBXCR; j++) {
+ if (sorted_bank_size[j] > largest_size) {
+ /* Save largest remaining value and its index */
+ largest_size = sorted_bank_size[j];
+ largest_size_index = j;
+ }
+ }
+
+ if (largest_size_index != 255) {
+ /* Swap the current and largest values */
+ current_size_index = sorted_bank_num[largest_size_index];
+ sorted_bank_size[largest_size_index] = sorted_bank_size[i];
+ sorted_bank_size[i] = largest_size;
+ sorted_bank_num[largest_size_index] = sorted_bank_num[i];
+ sorted_bank_num[i] = current_size_index;
+ }
+ }
+
+ /* Set the SDRAM0_BxCR regs thanks to sort tables */
+ for (bx_cr_num = 0, bank_base_addr = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
+ if (bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes) {
+ mtdcr(memcfga, mem_b0cr + (sorted_bank_num[bx_cr_num] << 2));
+ temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK |
+ SDRAM_BXCR_SDAM_MASK | SDRAM_BXCR_SDBE);
+ temp = temp | (bank_base_addr & SDRAM_BXCR_SDBA_MASK) |
+ bank_parms[sorted_bank_num[bx_cr_num]].cr;
+ mtdcr(memcfgd, temp);
+ bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes;
+ }
+ }
+
+ return(bank_base_addr);
+}
+
+void program_ecc (unsigned long num_bytes)
+{
+ unsigned long bank_base_addr;
+ unsigned long current_address;
+ unsigned long end_address;
+ unsigned long address_increment;
+ unsigned long cfg0;
+
+ /*
+ * get Memory Controller Options 0 data
+ */
+ mfsdram(mem_cfg0, cfg0);
+
+ /*
+ * reset the bank_base address
+ */
+ bank_base_addr = CFG_SDRAM_BASE;
+
+ if ((cfg0 & SDRAM_CFG0_MCHK_MASK) != SDRAM_CFG0_MCHK_NON) {
+ mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
+ SDRAM_CFG0_MCHK_GEN);
+
+ if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) {
+ address_increment = 4;
+ } else {
+ address_increment = 8;
+ }
+
+ current_address = (unsigned long)(bank_base_addr);
+ end_address = (unsigned long)(bank_base_addr) + num_bytes;
+
+ while (current_address < end_address) {
+ *((unsigned long*)current_address) = 0x00000000;
+ current_address += address_increment;
+ }
+
+ mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
+ SDRAM_CFG0_MCHK_CHK);
+ }
+}
+#endif /* CONFIG_SPD_EEPROM */
bedbug_405.o commproc.o \
cpu.o cpu_init.o i2c.o interrupts.o \
miiphy.o ndfc.o sdram.o serial.o \
- spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o \
+ 40x_spd_sdram.o 44x_spd_ddr.o 44x_spd_ddr2.o speed.o \
+ tlb.o traps.o usb_ohci.o usbdev.o \
440spe_pcie.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
- *
- * Based on code by:
- *
- * Kenneth Johansson ,Ericsson AB.
- * kenneth.johansson@etx.ericsson.se
- *
- * hacked up by bill hunter. fixed so we could run before
- * serial_init and console_init. previous version avoided this by
- * running out of cache memory during serial/console init, then running
- * this code later.
- *
- * (C) Copyright 2002
- * Jun Gu, Artesyn Technology, jung@artesyncp.com
- * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
- *
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <i2c.h>
-#include <ppc4xx.h>
-
-#ifdef CONFIG_SPD_EEPROM
-
-/*
- * Set default values
- */
-#ifndef CFG_I2C_SPEED
-#define CFG_I2C_SPEED 50000
-#endif
-
-#ifndef CFG_I2C_SLAVE
-#define CFG_I2C_SLAVE 0xFE
-#endif
-
-#define ONE_BILLION 1000000000
-
-#ifndef CONFIG_440 /* for 405 WALNUT/SYCAMORE/BUBINGA boards */
-
-#define SDRAM0_CFG_DCE 0x80000000
-#define SDRAM0_CFG_SRE 0x40000000
-#define SDRAM0_CFG_PME 0x20000000
-#define SDRAM0_CFG_MEMCHK 0x10000000
-#define SDRAM0_CFG_REGEN 0x08000000
-#define SDRAM0_CFG_ECCDD 0x00400000
-#define SDRAM0_CFG_EMDULR 0x00200000
-#define SDRAM0_CFG_DRW_SHIFT (31-6)
-#define SDRAM0_CFG_BRPF_SHIFT (31-8)
-
-#define SDRAM0_TR_CASL_SHIFT (31-8)
-#define SDRAM0_TR_PTA_SHIFT (31-13)
-#define SDRAM0_TR_CTP_SHIFT (31-15)
-#define SDRAM0_TR_LDF_SHIFT (31-17)
-#define SDRAM0_TR_RFTA_SHIFT (31-29)
-#define SDRAM0_TR_RCD_SHIFT (31-31)
-
-#define SDRAM0_RTR_SHIFT (31-15)
-#define SDRAM0_ECCCFG_SHIFT (31-11)
-
-/* SDRAM0_CFG enable macro */
-#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT )
-
-#define SDRAM0_BXCR_SZ_MASK 0x000e0000
-#define SDRAM0_BXCR_AM_MASK 0x0000e000
-
-#define SDRAM0_BXCR_SZ_SHIFT (31-14)
-#define SDRAM0_BXCR_AM_SHIFT (31-18)
-
-#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
-#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
-
-#ifdef CONFIG_SPDDRAM_SILENT
-# define SPD_ERR(x) do { return 0; } while (0)
-#else
-# define SPD_ERR(x) do { printf(x); return(0); } while (0)
-#endif
-
-#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
-
-/* function prototypes */
-int spd_read(uint addr);
-
-
-/*
- * This function is reading data from the DIMM module EEPROM over the SPD bus
- * and uses that to program the sdram controller.
- *
- * This works on boards that has the same schematics that the AMCC walnut has.
- *
- * Input: null for default I2C spd functions or a pointer to a custom function
- * returning spd_data.
- */
-
-long int spd_sdram(int(read_spd)(uint addr))
-{
- int tmp,row,col;
- int total_size,bank_size,bank_code;
- int ecc_on;
- int mode;
- int bank_cnt;
-
- int sdram0_pmit=0x07c00000;
-#ifndef CONFIG_405EP /* not on PPC405EP */
- int sdram0_besr0=-1;
- int sdram0_besr1=-1;
- int sdram0_eccesr=-1;
-#endif
- int sdram0_ecccfg;
-
- int sdram0_rtr=0;
- int sdram0_tr=0;
-
- int sdram0_b0cr;
- int sdram0_b1cr;
- int sdram0_b2cr;
- int sdram0_b3cr;
-
- int sdram0_cfg=0;
-
- int t_rp;
- int t_rcd;
- int t_ras;
- int t_rc;
- int min_cas;
-
- PPC405_SYS_INFO sys_info;
- unsigned long bus_period_x_10;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
- if (read_spd == 0){
- read_spd=spd_read;
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
- }
-
- /* Make shure we are using SDRAM */
- if (read_spd(2) != 0x04) {
- SPD_ERR("SDRAM - non SDRAM memory module found\n");
- }
-
- /* ------------------------------------------------------------------
- * configure memory timing register
- *
- * data from DIMM:
- * 27 IN Row Precharge Time ( t RP)
- * 29 MIN RAS to CAS Delay ( t RCD)
- * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
- * -------------------------------------------------------------------*/
-
- /*
- * first figure out which cas latency mode to use
- * use the min supported mode
- */
-
- tmp = read_spd(127) & 0x6;
- if (tmp == 0x02) { /* only cas = 2 supported */
- min_cas = 2;
-/* t_ck = read_spd(9); */
-/* t_ac = read_spd(10); */
- } else if (tmp == 0x04) { /* only cas = 3 supported */
- min_cas = 3;
-/* t_ck = read_spd(9); */
-/* t_ac = read_spd(10); */
- } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
- min_cas = 2;
-/* t_ck = read_spd(23); */
-/* t_ac = read_spd(24); */
- } else {
- SPD_ERR("SDRAM - unsupported CAS latency \n");
- }
-
- /* get some timing values, t_rp,t_rcd,t_ras,t_rc
- */
- t_rp = read_spd(27);
- t_rcd = read_spd(29);
- t_ras = read_spd(30);
- t_rc = t_ras + t_rp;
-
- /* The following timing calcs subtract 1 before deviding.
- * this has effect of using ceiling instead of floor rounding,
- * and also subtracting 1 to convert number to reg value
- */
- /* set up CASL */
- sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
- /* set up PTA */
- sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT;
- /* set up CTP */
- tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3;
- if (tmp < 1)
- tmp = 1;
- sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
- /* set LDF = 2 cycles, reg value = 1 */
- sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
- /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
- tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3;
- if (tmp < 0)
- tmp = 0;
- if (tmp > 6)
- tmp = 6;
- sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
- /* set RCD = t_rcd/bus_period*/
- sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ;
-
-
- /*------------------------------------------------------------------
- * configure RTR register
- * -------------------------------------------------------------------*/
- row = read_spd(3);
- col = read_spd(4);
- tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
- switch (tmp) {
- case 0x00:
- tmp = 15625;
- break;
- case 0x01:
- tmp = 15625 / 4;
- break;
- case 0x02:
- tmp = 15625 / 2;
- break;
- case 0x03:
- tmp = 15625 * 2;
- break;
- case 0x04:
- tmp = 15625 * 4;
- break;
- case 0x05:
- tmp = 15625 * 8;
- break;
- default:
- SPD_ERR("SDRAM - Bad refresh period \n");
- }
- /* convert from nsec to bus cycles */
- tmp = (tmp * 10) / bus_period_x_10;
- sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
-
- /*------------------------------------------------------------------
- * determine the number of banks used
- * -------------------------------------------------------------------*/
- /* byte 7:6 is module data width */
- if (read_spd(7) != 0)
- SPD_ERR("SDRAM - unsupported module width\n");
- tmp = read_spd(6);
- if (tmp < 32)
- SPD_ERR("SDRAM - unsupported module width\n");
- else if (tmp < 64)
- bank_cnt = 1; /* one bank per sdram side */
- else if (tmp < 73)
- bank_cnt = 2; /* need two banks per side */
- else if (tmp < 161)
- bank_cnt = 4; /* need four banks per side */
- else
- SPD_ERR("SDRAM - unsupported module width\n");
-
- /* byte 5 is the module row count (refered to as dimm "sides") */
- tmp = read_spd(5);
- if (tmp == 1)
- ;
- else if (tmp==2)
- bank_cnt *= 2;
- else if (tmp==4)
- bank_cnt *= 4;
- else
- bank_cnt = 8; /* 8 is an error code */
-
- if (bank_cnt > 4) /* we only have 4 banks to work with */
- SPD_ERR("SDRAM - unsupported module rows for this width\n");
-
- /* now check for ECC ability of module. We only support ECC
- * on 32 bit wide devices with 8 bit ECC.
- */
- if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) {
- sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT;
- ecc_on = 1;
- } else {
- sdram0_ecccfg = 0;
- ecc_on = 0;
- }
-
- /*------------------------------------------------------------------
- * calculate total size
- * -------------------------------------------------------------------*/
- /* calculate total size and do sanity check */
- tmp = read_spd(31);
- total_size = 1 << 22; /* total_size = 4MB */
- /* now multiply 4M by the smallest device row density */
- /* note that we don't support asymetric rows */
- while (((tmp & 0x0001) == 0) && (tmp != 0)) {
- total_size = total_size << 1;
- tmp = tmp >> 1;
- }
- total_size *= read_spd(5); /* mult by module rows (dimm sides) */
-
- /*------------------------------------------------------------------
- * map rows * cols * banks to a mode
- * -------------------------------------------------------------------*/
-
- switch (row) {
- case 11:
- switch (col) {
- case 8:
- mode=4; /* mode 5 */
- break;
- case 9:
- case 10:
- mode=0; /* mode 1 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- case 12:
- switch (col) {
- case 8:
- mode=3; /* mode 4 */
- break;
- case 9:
- case 10:
- mode=1; /* mode 2 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- case 13:
- switch (col) {
- case 8:
- mode=5; /* mode 6 */
- break;
- case 9:
- case 10:
- if (read_spd(17) == 2)
- mode = 6; /* mode 7 */
- else
- mode = 2; /* mode 3 */
- break;
- case 11:
- mode = 2; /* mode 3 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
-
- /*------------------------------------------------------------------
- * using the calculated values, compute the bank
- * config register values.
- * -------------------------------------------------------------------*/
- sdram0_b1cr = 0;
- sdram0_b2cr = 0;
- sdram0_b3cr = 0;
-
- /* compute the size of each bank */
- bank_size = total_size / bank_cnt;
- /* convert bank size to bank size code for ppc4xx
- by takeing log2(bank_size) - 22 */
- tmp = bank_size; /* start with tmp = bank_size */
- bank_code = 0; /* and bank_code = 0 */
- while (tmp > 1) { /* this takes log2 of tmp */
- bank_code++; /* and stores result in bank_code */
- tmp = tmp >> 1;
- } /* bank_code is now log2(bank_size) */
- bank_code -= 22; /* subtract 22 to get the code */
-
- tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
- sdram0_b0cr = (bank_size * 0) | tmp;
-#ifndef CONFIG_405EP /* not on PPC405EP */
- if (bank_cnt > 1)
- sdram0_b2cr = (bank_size * 1) | tmp;
- if (bank_cnt > 2)
- sdram0_b1cr = (bank_size * 2) | tmp;
- if (bank_cnt > 3)
- sdram0_b3cr = (bank_size * 3) | tmp;
-#else
- /* PPC405EP chip only supports two SDRAM banks */
- if (bank_cnt > 1)
- sdram0_b1cr = (bank_size * 1) | tmp;
- if (bank_cnt > 2)
- total_size = 2 * bank_size;
-#endif
-
- /*
- * enable sdram controller DCE=1
- * enable burst read prefetch to 32 bytes BRPF=2
- * leave other functions off
- */
-
- /*------------------------------------------------------------------
- * now that we've done our calculations, we are ready to
- * program all the registers.
- * -------------------------------------------------------------------*/
-
-#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
- /* disable memcontroller so updates work */
- mtsdram0( mem_mcopt1, 0 );
-
-#ifndef CONFIG_405EP /* not on PPC405EP */
- mtsdram0( mem_besra , sdram0_besr0 );
- mtsdram0( mem_besrb , sdram0_besr1 );
- mtsdram0( mem_ecccf , sdram0_ecccfg );
- mtsdram0( mem_eccerr, sdram0_eccesr );
-#endif
- mtsdram0( mem_rtr , sdram0_rtr );
- mtsdram0( mem_pmit , sdram0_pmit );
- mtsdram0( mem_mb0cf , sdram0_b0cr );
- mtsdram0( mem_mb1cf , sdram0_b1cr );
-#ifndef CONFIG_405EP /* not on PPC405EP */
- mtsdram0( mem_mb2cf , sdram0_b2cr );
- mtsdram0( mem_mb3cf , sdram0_b3cr );
-#endif
- mtsdram0( mem_sdtr1 , sdram0_tr );
-
- /* SDRAM have a power on delay, 500 micro should do */
- udelay(500);
- sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
- if (ecc_on)
- sdram0_cfg |= SDRAM0_CFG_MEMCHK;
- mtsdram0(mem_mcopt1, sdram0_cfg);
-
- return (total_size);
-}
-
-int spd_read(uint addr)
-{
- uchar data[2];
-
- if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0)
- return (int)data[0];
- else
- return 0;
-}
-
-#else /* CONFIG_440 */
-
-/*-----------------------------------------------------------------------------
- | Memory Controller Options 0
- +-----------------------------------------------------------------------------*/
-#define SDRAM_CFG0_DCEN 0x80000000 /* SDRAM Controller Enable */
-#define SDRAM_CFG0_MCHK_MASK 0x30000000 /* Memory data errchecking mask */
-#define SDRAM_CFG0_MCHK_NON 0x00000000 /* No ECC generation */
-#define SDRAM_CFG0_MCHK_GEN 0x20000000 /* ECC generation */
-#define SDRAM_CFG0_MCHK_CHK 0x30000000 /* ECC generation and checking */
-#define SDRAM_CFG0_RDEN 0x08000000 /* Registered DIMM enable */
-#define SDRAM_CFG0_PMUD 0x04000000 /* Page management unit */
-#define SDRAM_CFG0_DMWD_MASK 0x02000000 /* DRAM width mask */
-#define SDRAM_CFG0_DMWD_32 0x00000000 /* 32 bits */
-#define SDRAM_CFG0_DMWD_64 0x02000000 /* 64 bits */
-#define SDRAM_CFG0_UIOS_MASK 0x00C00000 /* Unused IO State */
-#define SDRAM_CFG0_PDP 0x00200000 /* Page deallocation policy */
-
-/*-----------------------------------------------------------------------------
- | Memory Controller Options 1
- +-----------------------------------------------------------------------------*/
-#define SDRAM_CFG1_SRE 0x80000000 /* Self-Refresh Entry */
-#define SDRAM_CFG1_PMEN 0x40000000 /* Power Management Enable */
-
-/*-----------------------------------------------------------------------------+
- | SDRAM DEVPOT Options
- +-----------------------------------------------------------------------------*/
-#define SDRAM_DEVOPT_DLL 0x80000000
-#define SDRAM_DEVOPT_DS 0x40000000
-
-/*-----------------------------------------------------------------------------+
- | SDRAM MCSTS Options
- +-----------------------------------------------------------------------------*/
-#define SDRAM_MCSTS_MRSC 0x80000000
-#define SDRAM_MCSTS_SRMS 0x40000000
-#define SDRAM_MCSTS_CIS 0x20000000
-
-/*-----------------------------------------------------------------------------
- | SDRAM Refresh Timer Register
- +-----------------------------------------------------------------------------*/
-#define SDRAM_RTR_RINT_MASK 0xFFFF0000
-#define SDRAM_RTR_RINT_ENCODE(n) (((n) << 16) & SDRAM_RTR_RINT_MASK)
-#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
-
-/*-----------------------------------------------------------------------------+
- | SDRAM UABus Base Address Reg
- +-----------------------------------------------------------------------------*/
-#define SDRAM_UABBA_UBBA_MASK 0x0000000F
-
-/*-----------------------------------------------------------------------------+
- | Memory Bank 0-7 configuration
- +-----------------------------------------------------------------------------*/
-#define SDRAM_BXCR_SDBA_MASK 0xff800000 /* Base address */
-#define SDRAM_BXCR_SDSZ_MASK 0x000e0000 /* Size */
-#define SDRAM_BXCR_SDSZ_8 0x00020000 /* 8M */
-#define SDRAM_BXCR_SDSZ_16 0x00040000 /* 16M */
-#define SDRAM_BXCR_SDSZ_32 0x00060000 /* 32M */
-#define SDRAM_BXCR_SDSZ_64 0x00080000 /* 64M */
-#define SDRAM_BXCR_SDSZ_128 0x000a0000 /* 128M */
-#define SDRAM_BXCR_SDSZ_256 0x000c0000 /* 256M */
-#define SDRAM_BXCR_SDSZ_512 0x000e0000 /* 512M */
-#define SDRAM_BXCR_SDAM_MASK 0x0000e000 /* Addressing mode */
-#define SDRAM_BXCR_SDAM_1 0x00000000 /* Mode 1 */
-#define SDRAM_BXCR_SDAM_2 0x00002000 /* Mode 2 */
-#define SDRAM_BXCR_SDAM_3 0x00004000 /* Mode 3 */
-#define SDRAM_BXCR_SDAM_4 0x00006000 /* Mode 4 */
-#define SDRAM_BXCR_SDBE 0x00000001 /* Memory Bank Enable */
-
-/*-----------------------------------------------------------------------------+
- | SDRAM TR0 Options
- +-----------------------------------------------------------------------------*/
-#define SDRAM_TR0_SDWR_MASK 0x80000000
-#define SDRAM_TR0_SDWR_2_CLK 0x00000000
-#define SDRAM_TR0_SDWR_3_CLK 0x80000000
-#define SDRAM_TR0_SDWD_MASK 0x40000000
-#define SDRAM_TR0_SDWD_0_CLK 0x00000000
-#define SDRAM_TR0_SDWD_1_CLK 0x40000000
-#define SDRAM_TR0_SDCL_MASK 0x01800000
-#define SDRAM_TR0_SDCL_2_0_CLK 0x00800000
-#define SDRAM_TR0_SDCL_2_5_CLK 0x01000000
-#define SDRAM_TR0_SDCL_3_0_CLK 0x01800000
-#define SDRAM_TR0_SDPA_MASK 0x000C0000
-#define SDRAM_TR0_SDPA_2_CLK 0x00040000
-#define SDRAM_TR0_SDPA_3_CLK 0x00080000
-#define SDRAM_TR0_SDPA_4_CLK 0x000C0000
-#define SDRAM_TR0_SDCP_MASK 0x00030000
-#define SDRAM_TR0_SDCP_2_CLK 0x00000000
-#define SDRAM_TR0_SDCP_3_CLK 0x00010000
-#define SDRAM_TR0_SDCP_4_CLK 0x00020000
-#define SDRAM_TR0_SDCP_5_CLK 0x00030000
-#define SDRAM_TR0_SDLD_MASK 0x0000C000
-#define SDRAM_TR0_SDLD_1_CLK 0x00000000
-#define SDRAM_TR0_SDLD_2_CLK 0x00004000
-#define SDRAM_TR0_SDRA_MASK 0x0000001C
-#define SDRAM_TR0_SDRA_6_CLK 0x00000000
-#define SDRAM_TR0_SDRA_7_CLK 0x00000004
-#define SDRAM_TR0_SDRA_8_CLK 0x00000008
-#define SDRAM_TR0_SDRA_9_CLK 0x0000000C
-#define SDRAM_TR0_SDRA_10_CLK 0x00000010
-#define SDRAM_TR0_SDRA_11_CLK 0x00000014
-#define SDRAM_TR0_SDRA_12_CLK 0x00000018
-#define SDRAM_TR0_SDRA_13_CLK 0x0000001C
-#define SDRAM_TR0_SDRD_MASK 0x00000003
-#define SDRAM_TR0_SDRD_2_CLK 0x00000001
-#define SDRAM_TR0_SDRD_3_CLK 0x00000002
-#define SDRAM_TR0_SDRD_4_CLK 0x00000003
-
-/*-----------------------------------------------------------------------------+
- | SDRAM TR1 Options
- +-----------------------------------------------------------------------------*/
-#define SDRAM_TR1_RDSS_MASK 0xC0000000
-#define SDRAM_TR1_RDSS_TR0 0x00000000
-#define SDRAM_TR1_RDSS_TR1 0x40000000
-#define SDRAM_TR1_RDSS_TR2 0x80000000
-#define SDRAM_TR1_RDSS_TR3 0xC0000000
-#define SDRAM_TR1_RDSL_MASK 0x00C00000
-#define SDRAM_TR1_RDSL_STAGE1 0x00000000
-#define SDRAM_TR1_RDSL_STAGE2 0x00400000
-#define SDRAM_TR1_RDSL_STAGE3 0x00800000
-#define SDRAM_TR1_RDCD_MASK 0x00000800
-#define SDRAM_TR1_RDCD_RCD_0_0 0x00000000
-#define SDRAM_TR1_RDCD_RCD_1_2 0x00000800
-#define SDRAM_TR1_RDCT_MASK 0x000001FF
-#define SDRAM_TR1_RDCT_ENCODE(x) (((x) << 0) & SDRAM_TR1_RDCT_MASK)
-#define SDRAM_TR1_RDCT_DECODE(x) (((x) & SDRAM_TR1_RDCT_MASK) >> 0)
-#define SDRAM_TR1_RDCT_MIN 0x00000000
-#define SDRAM_TR1_RDCT_MAX 0x000001FF
-
-/*-----------------------------------------------------------------------------+
- | SDRAM WDDCTR Options
- +-----------------------------------------------------------------------------*/
-#define SDRAM_WDDCTR_WRCP_MASK 0xC0000000
-#define SDRAM_WDDCTR_WRCP_0DEG 0x00000000
-#define SDRAM_WDDCTR_WRCP_90DEG 0x40000000
-#define SDRAM_WDDCTR_WRCP_180DEG 0x80000000
-#define SDRAM_WDDCTR_DCD_MASK 0x000001FF
-
-/*-----------------------------------------------------------------------------+
- | SDRAM CLKTR Options
- +-----------------------------------------------------------------------------*/
-#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
-#define SDRAM_CLKTR_CLKP_0DEG 0x00000000
-#define SDRAM_CLKTR_CLKP_90DEG 0x40000000
-#define SDRAM_CLKTR_CLKP_180DEG 0x80000000
-#define SDRAM_CLKTR_DCDT_MASK 0x000001FF
-
-/*-----------------------------------------------------------------------------+
- | SDRAM DLYCAL Options
- +-----------------------------------------------------------------------------*/
-#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
-#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
-#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
-
-/*-----------------------------------------------------------------------------+
- | General Definition
- +-----------------------------------------------------------------------------*/
-#define DEFAULT_SPD_ADDR1 0x53
-#define DEFAULT_SPD_ADDR2 0x52
-#define MAXBANKS 4 /* at most 4 dimm banks */
-#define MAX_SPD_BYTES 256
-#define NUMHALFCYCLES 4
-#define NUMMEMTESTS 8
-#define NUMMEMWORDS 8
-#define MAXBXCR 4
-#define TRUE 1
-#define FALSE 0
-
-const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
- {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF},
- {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000},
- {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555},
- {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA},
- {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A},
- {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5},
- {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA},
- {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55}
-};
-
-/* bank_parms is used to sort the bank sizes by descending order */
-struct bank_param {
- unsigned long cr;
- unsigned long bank_size_bytes;
-};
-
-typedef struct bank_param BANKPARMS;
-
-#ifdef CFG_SIMULATE_SPD_EEPROM
-extern unsigned char cfg_simulate_spd_eeprom[128];
-#endif
-
-unsigned char spd_read(uchar chip, uint addr);
-
-void get_spd_info(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-void check_mem_type
-(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-void check_volt_type
-(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-void program_cfg0(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-void program_cfg1(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-void program_rtr (unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-void program_tr0 (unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-void program_tr1 (void);
-
-void program_ecc (unsigned long num_bytes);
-
-unsigned
-long program_bxcr(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-/*
- * This function is reading data from the DIMM module EEPROM over the SPD bus
- * and uses that to program the sdram controller.
- *
- * This works on boards that has the same schematics that the AMCC walnut has.
- *
- * BUG: Don't handle ECC memory
- * BUG: A few values in the TR register is currently hardcoded
- */
-
-long int spd_sdram(void) {
- unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
- unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
- unsigned long total_size;
- unsigned long cfg0;
- unsigned long mcsts;
- unsigned long num_dimm_banks; /* on board dimm banks */
-
- num_dimm_banks = sizeof(iic0_dimm_addr);
-
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
-
- /*
- * Read the SPD information using I2C interface. Check to see if the
- * DIMM slots are populated.
- */
- get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * Check the memory type for the dimms plugged.
- */
- check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * Check the voltage type for the dimms plugged.
- */
- check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
- /*
- * Soft-reset SDRAM controller.
- */
- mtsdr(sdr_srst, SDR0_SRST_DMC);
- mtsdr(sdr_srst, 0x00000000);
-#endif
-
- /*
- * program 440GP SDRAM controller options (SDRAM0_CFG0)
- */
- program_cfg0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program 440GP SDRAM controller options (SDRAM0_CFG1)
- */
- program_cfg1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program SDRAM refresh register (SDRAM0_RTR)
- */
- program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program SDRAM Timing Register 0 (SDRAM0_TR0)
- */
- program_tr0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program the BxCR registers to find out total sdram installed
- */
- total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
- num_dimm_banks);
-
- /*
- * program SDRAM Clock Timing Register (SDRAM0_CLKTR)
- */
- mtsdram(mem_clktr, 0x40000000);
-
- /*
- * delay to ensure 200 usec has elapsed
- */
- udelay(400);
-
- /*
- * enable the memory controller
- */
- mfsdram(mem_cfg0, cfg0);
- mtsdram(mem_cfg0, cfg0 | SDRAM_CFG0_DCEN);
-
- /*
- * wait for SDRAM_CFG0_DC_EN to complete
- */
- while (1) {
- mfsdram(mem_mcsts, mcsts);
- if ((mcsts & SDRAM_MCSTS_MRSC) != 0) {
- break;
- }
- }
-
- /*
- * program SDRAM Timing Register 1, adding some delays
- */
- program_tr1();
-
- /*
- * if ECC is enabled, initialize parity bits
- */
-
- return total_size;
-}
-
-unsigned char spd_read(uchar chip, uint addr)
-{
- unsigned char data[2];
-
-#ifdef CFG_SIMULATE_SPD_EEPROM
- if (chip == CFG_SIMULATE_SPD_EEPROM) {
- /*
- * Onboard spd eeprom requested -> simulate values
- */
- return cfg_simulate_spd_eeprom[addr];
- }
-#endif /* CFG_SIMULATE_SPD_EEPROM */
-
- if (i2c_probe(chip) == 0) {
- if (i2c_read(chip, addr, 1, data, 1) == 0) {
- return data[0];
- }
- }
-
- return 0;
-}
-
-void get_spd_info(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_found;
- unsigned char num_of_bytes;
- unsigned char total_size;
-
- dimm_found = FALSE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- num_of_bytes = 0;
- total_size = 0;
-
- num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
- total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
-
- if ((num_of_bytes != 0) && (total_size != 0)) {
- dimm_populated[dimm_num] = TRUE;
- dimm_found = TRUE;
-#if 0
- printf("DIMM slot %lu: populated\n", dimm_num);
-#endif
- } else {
- dimm_populated[dimm_num] = FALSE;
-#if 0
- printf("DIMM slot %lu: Not populated\n", dimm_num);
-#endif
- }
- }
-
- if (dimm_found == FALSE) {
- printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- hang();
- }
-}
-
-void check_mem_type(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned char dimm_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
- switch (dimm_type) {
- case 7:
-#if 0
- printf("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
-#endif
- break;
- default:
- printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
- dimm_num);
- printf("Only DDR SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
- break;
- }
- }
- }
-}
-
-
-void check_volt_type(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long voltage_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
- if (voltage_type != 0x04) {
- printf("ERROR: DIMM %lu with unsupported voltage level.\n",
- dimm_num);
- hang();
- } else {
-#if 0
- printf("DIMM %lu voltage level supported.\n", dimm_num);
-#endif
- }
- break;
- }
- }
-}
-
-void program_cfg0(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long cfg0;
- unsigned long ecc_enabled;
- unsigned char ecc;
- unsigned char attributes;
- unsigned long data_width;
- unsigned long dimm_32bit;
- unsigned long dimm_64bit;
-
- /*
- * get Memory Controller Options 0 data
- */
- mfsdram(mem_cfg0, cfg0);
-
- /*
- * clear bits
- */
- cfg0 &= ~(SDRAM_CFG0_DCEN | SDRAM_CFG0_MCHK_MASK |
- SDRAM_CFG0_RDEN | SDRAM_CFG0_PMUD |
- SDRAM_CFG0_DMWD_MASK |
- SDRAM_CFG0_UIOS_MASK | SDRAM_CFG0_PDP);
-
-
- /*
- * FIXME: assume the DDR SDRAMs in both banks are the same
- */
- ecc_enabled = TRUE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
- if (ecc != 0x02) {
- ecc_enabled = FALSE;
- }
-
- /*
- * program Registered DIMM Enable
- */
- attributes = spd_read(iic0_dimm_addr[dimm_num], 21);
- if ((attributes & 0x02) != 0x00) {
- cfg0 |= SDRAM_CFG0_RDEN;
- }
-
- /*
- * program DDR SDRAM Data Width
- */
- data_width =
- (unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) +
- (((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8);
- if (data_width == 64 || data_width == 72) {
- dimm_64bit = TRUE;
- cfg0 |= SDRAM_CFG0_DMWD_64;
- } else if (data_width == 32 || data_width == 40) {
- dimm_32bit = TRUE;
- cfg0 |= SDRAM_CFG0_DMWD_32;
- } else {
- printf("WARNING: DIMM with datawidth of %lu bits.\n",
- data_width);
- printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
- hang();
- }
- break;
- }
- }
-
- /*
- * program Memory Data Error Checking
- */
- if (ecc_enabled == TRUE) {
- cfg0 |= SDRAM_CFG0_MCHK_GEN;
- } else {
- cfg0 |= SDRAM_CFG0_MCHK_NON;
- }
-
- /*
- * program Page Management Unit (0 == enabled)
- */
- cfg0 &= ~SDRAM_CFG0_PMUD;
-
- /*
- * program Memory Controller Options 0
- * Note: DCEN must be enabled after all DDR SDRAM controller
- * configuration registers get initialized.
- */
- mtsdram(mem_cfg0, cfg0);
-}
-
-void program_cfg1(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long cfg1;
- mfsdram(mem_cfg1, cfg1);
-
- /*
- * Self-refresh exit, disable PM
- */
- cfg1 &= ~(SDRAM_CFG1_SRE | SDRAM_CFG1_PMEN);
-
- /*
- * program Memory Controller Options 1
- */
- mtsdram(mem_cfg1, cfg1);
-}
-
-void program_rtr (unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long bus_period_x_10;
- unsigned long refresh_rate = 0;
- unsigned char refresh_rate_type;
- unsigned long refresh_interval;
- unsigned long sdram_rtr;
- PPC440_SYS_INFO sys_info;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
- switch (refresh_rate_type) {
- case 0x00:
- refresh_rate = 15625;
- break;
- case 0x01:
- refresh_rate = 15625/4;
- break;
- case 0x02:
- refresh_rate = 15625/2;
- break;
- case 0x03:
- refresh_rate = 15626*2;
- break;
- case 0x04:
- refresh_rate = 15625*4;
- break;
- case 0x05:
- refresh_rate = 15625*8;
- break;
- default:
- printf("ERROR: DIMM %lu, unsupported refresh rate/type.\n",
- dimm_num);
- printf("Replace the DIMM module with a supported DIMM.\n");
- break;
- }
-
- break;
- }
- }
-
- refresh_interval = refresh_rate * 10 / bus_period_x_10;
- sdram_rtr = (refresh_interval & 0x3ff8) << 16;
-
- /*
- * program Refresh Timer Register (SDRAM0_RTR)
- */
- mtsdram(mem_rtr, sdram_rtr);
-}
-
-void program_tr0 (unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long tr0;
- unsigned char wcsbc;
- unsigned char t_rp_ns;
- unsigned char t_rcd_ns;
- unsigned char t_ras_ns;
- unsigned long t_rp_clk;
- unsigned long t_ras_rcd_clk;
- unsigned long t_rcd_clk;
- unsigned long t_rfc_clk;
- unsigned long plb_check;
- unsigned char cas_bit;
- unsigned long cas_index;
- unsigned char cas_2_0_available;
- unsigned char cas_2_5_available;
- unsigned char cas_3_0_available;
- unsigned long cycle_time_ns_x_10[3];
- unsigned long tcyc_3_0_ns_x_10;
- unsigned long tcyc_2_5_ns_x_10;
- unsigned long tcyc_2_0_ns_x_10;
- unsigned long tcyc_reg;
- unsigned long bus_period_x_10;
- PPC440_SYS_INFO sys_info;
- unsigned long residue;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
- /*
- * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
- */
- mfsdram(mem_tr0, tr0);
- tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
- SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
- SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
- SDRAM_TR0_SDRA_MASK | SDRAM_TR0_SDRD_MASK);
-
- /*
- * initialization
- */
- wcsbc = 0;
- t_rp_ns = 0;
- t_rcd_ns = 0;
- t_ras_ns = 0;
- cas_2_0_available = TRUE;
- cas_2_5_available = TRUE;
- cas_3_0_available = TRUE;
- tcyc_2_0_ns_x_10 = 0;
- tcyc_2_5_ns_x_10 = 0;
- tcyc_3_0_ns_x_10 = 0;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
- t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
- t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
- t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
- cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
-
- for (cas_index = 0; cas_index < 3; cas_index++) {
- switch (cas_index) {
- case 0:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
- break;
- case 1:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
- break;
- default:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
- break;
- }
-
- if ((tcyc_reg & 0x0F) >= 10) {
- printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
- dimm_num);
- hang();
- }
-
- cycle_time_ns_x_10[cas_index] =
- (((tcyc_reg & 0xF0) >> 4) * 10) + (tcyc_reg & 0x0F);
- }
-
- cas_index = 0;
-
- if ((cas_bit & 0x80) != 0) {
- cas_index += 3;
- } else if ((cas_bit & 0x40) != 0) {
- cas_index += 2;
- } else if ((cas_bit & 0x20) != 0) {
- cas_index += 1;
- }
-
- if (((cas_bit & 0x10) != 0) && (cas_index < 3)) {
- tcyc_3_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- } else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_3_0_available = FALSE;
- }
-
- if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
- tcyc_2_5_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- } else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_2_5_available = FALSE;
- }
-
- if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
- tcyc_2_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- } else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_2_0_available = FALSE;
- }
-
- break;
- }
- }
-
- /*
- * Program SD_WR and SD_WCSBC fields
- */
- tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */
- switch (wcsbc) {
- case 0:
- tr0 |= SDRAM_TR0_SDWD_0_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDWD_1_CLK;
- break;
- }
-
- /*
- * Program SD_CASL field
- */
- if ((cas_2_0_available == TRUE) &&
- (bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
- } else if ((cas_2_5_available == TRUE) &&
- (bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
- } else if ((cas_3_0_available == TRUE) &&
- (bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
- } else {
- printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
- printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range.\n");
- hang();
- }
-
- /*
- * Calculate Trp in clock cycles and round up if necessary
- * Program SD_PTA field
- */
- t_rp_clk = sys_info.freqPLB * t_rp_ns / ONE_BILLION;
- plb_check = ONE_BILLION * t_rp_clk / t_rp_ns;
- if (sys_info.freqPLB != plb_check) {
- t_rp_clk++;
- }
- switch ((unsigned long)t_rp_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDPA_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDPA_3_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDPA_4_CLK;
- break;
- }
-
- /*
- * Program SD_CTP field
- */
- t_ras_rcd_clk = sys_info.freqPLB * (t_ras_ns - t_rcd_ns) / ONE_BILLION;
- plb_check = ONE_BILLION * t_ras_rcd_clk / (t_ras_ns - t_rcd_ns);
- if (sys_info.freqPLB != plb_check) {
- t_ras_rcd_clk++;
- }
- switch (t_ras_rcd_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDCP_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDCP_3_CLK;
- break;
- case 4:
- tr0 |= SDRAM_TR0_SDCP_4_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDCP_5_CLK;
- break;
- }
-
- /*
- * Program SD_LDF field
- */
- tr0 |= SDRAM_TR0_SDLD_2_CLK;
-
- /*
- * Program SD_RFTA field
- * FIXME tRFC hardcoded as 75 nanoseconds
- */
- t_rfc_clk = sys_info.freqPLB / (ONE_BILLION / 75);
- residue = sys_info.freqPLB % (ONE_BILLION / 75);
- if (residue >= (ONE_BILLION / 150)) {
- t_rfc_clk++;
- }
- switch (t_rfc_clk) {
- case 0:
- case 1:
- case 2:
- case 3:
- case 4:
- case 5:
- case 6:
- tr0 |= SDRAM_TR0_SDRA_6_CLK;
- break;
- case 7:
- tr0 |= SDRAM_TR0_SDRA_7_CLK;
- break;
- case 8:
- tr0 |= SDRAM_TR0_SDRA_8_CLK;
- break;
- case 9:
- tr0 |= SDRAM_TR0_SDRA_9_CLK;
- break;
- case 10:
- tr0 |= SDRAM_TR0_SDRA_10_CLK;
- break;
- case 11:
- tr0 |= SDRAM_TR0_SDRA_11_CLK;
- break;
- case 12:
- tr0 |= SDRAM_TR0_SDRA_12_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDRA_13_CLK;
- break;
- }
-
- /*
- * Program SD_RCD field
- */
- t_rcd_clk = sys_info.freqPLB * t_rcd_ns / ONE_BILLION;
- plb_check = ONE_BILLION * t_rcd_clk / t_rcd_ns;
- if (sys_info.freqPLB != plb_check) {
- t_rcd_clk++;
- }
- switch (t_rcd_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDRD_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDRD_3_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDRD_4_CLK;
- break;
- }
-
-#if 0
- printf("tr0: %x\n", tr0);
-#endif
- mtsdram(mem_tr0, tr0);
-}
-
-void program_tr1 (void)
-{
- unsigned long tr0;
- unsigned long tr1;
- unsigned long cfg0;
- unsigned long ecc_temp;
- unsigned long dlycal;
- unsigned long dly_val;
- unsigned long i, j, k;
- unsigned long bxcr_num;
- unsigned long max_pass_length;
- unsigned long current_pass_length;
- unsigned long current_fail_length;
- unsigned long current_start;
- unsigned long rdclt;
- unsigned long rdclt_offset;
- long max_start;
- long max_end;
- long rdclt_average;
- unsigned char window_found;
- unsigned char fail_found;
- unsigned char pass_found;
- unsigned long * membase;
- PPC440_SYS_INFO sys_info;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
-
- /*
- * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
- */
- mfsdram(mem_tr1, tr1);
- tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
- SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
-
- mfsdram(mem_tr0, tr0);
- if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
- (sys_info.freqPLB > 100000000)) {
- tr1 |= SDRAM_TR1_RDSS_TR2;
- tr1 |= SDRAM_TR1_RDSL_STAGE3;
- tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
- } else {
- tr1 |= SDRAM_TR1_RDSS_TR1;
- tr1 |= SDRAM_TR1_RDSL_STAGE2;
- tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
- }
-
- /*
- * save CFG0 ECC setting to a temporary variable and turn ECC off
- */
- mfsdram(mem_cfg0, cfg0);
- ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
- mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
-
- /*
- * get the delay line calibration register value
- */
- mfsdram(mem_dlycal, dlycal);
- dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
-
- max_pass_length = 0;
- max_start = 0;
- max_end = 0;
- current_pass_length = 0;
- current_fail_length = 0;
- current_start = 0;
- rdclt_offset = 0;
- window_found = FALSE;
- fail_found = FALSE;
- pass_found = FALSE;
-#ifdef DEBUG
- printf("Starting memory test ");
-#endif
- for (k = 0; k < NUMHALFCYCLES; k++) {
- for (rdclt = 0; rdclt < dly_val; rdclt++) {
- /*
- * Set the timing reg for the test.
- */
- mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
-
- for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
- mtdcr(memcfga, mem_b0cr + (bxcr_num<<2));
- if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
- /* Bank is enabled */
- membase = (unsigned long*)
- (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK);
-
- /*
- * Run the short memory test
- */
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- membase[j] = test[i][j];
- ppcDcbf((unsigned long)&(membase[j]));
- }
-
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (membase[j] != test[i][j]) {
- ppcDcbf((unsigned long)&(membase[j]));
- break;
- }
- ppcDcbf((unsigned long)&(membase[j]));
- }
-
- if (j < NUMMEMWORDS) {
- break;
- }
- }
-
- /*
- * see if the rdclt value passed
- */
- if (i < NUMMEMTESTS) {
- break;
- }
- }
- }
-
- if (bxcr_num == MAXBXCR) {
- if (fail_found == TRUE) {
- pass_found = TRUE;
- if (current_pass_length == 0) {
- current_start = rdclt_offset + rdclt;
- }
-
- current_fail_length = 0;
- current_pass_length++;
-
- if (current_pass_length > max_pass_length) {
- max_pass_length = current_pass_length;
- max_start = current_start;
- max_end = rdclt_offset + rdclt;
- }
- }
- } else {
- current_pass_length = 0;
- current_fail_length++;
-
- if (current_fail_length >= (dly_val>>2)) {
- if (fail_found == FALSE) {
- fail_found = TRUE;
- } else if (pass_found == TRUE) {
- window_found = TRUE;
- break;
- }
- }
- }
- }
-#ifdef DEBUG
- printf(".");
-#endif
- if (window_found == TRUE) {
- break;
- }
-
- tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
- rdclt_offset += dly_val;
- }
-#ifdef DEBUG
- printf("\n");
-#endif
-
- /*
- * make sure we find the window
- */
- if (window_found == FALSE) {
- printf("ERROR: Cannot determine a common read delay.\n");
- hang();
- }
-
- /*
- * restore the orignal ECC setting
- */
- mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
-
- /*
- * set the SDRAM TR1 RDCD value
- */
- tr1 &= ~SDRAM_TR1_RDCD_MASK;
- if ((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) {
- tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
- } else {
- tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
- }
-
- /*
- * set the SDRAM TR1 RDCLT value
- */
- tr1 &= ~SDRAM_TR1_RDCT_MASK;
- while (max_end >= (dly_val << 1)) {
- max_end -= (dly_val << 1);
- max_start -= (dly_val << 1);
- }
-
- rdclt_average = ((max_start + max_end) >> 1);
- if (rdclt_average >= 0x60)
- while (1)
- ;
-
- if (rdclt_average < 0) {
- rdclt_average = 0;
- }
-
- if (rdclt_average >= dly_val) {
- rdclt_average -= dly_val;
- tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
- }
- tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
-
-#if 0
- printf("tr1: %x\n", tr1);
-#endif
- /*
- * program SDRAM Timing Register 1 TR1
- */
- mtsdram(mem_tr1, tr1);
-}
-
-unsigned long program_bxcr(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long bank_base_addr;
- unsigned long cr;
- unsigned long i;
- unsigned long j;
- unsigned long temp;
- unsigned char num_row_addr;
- unsigned char num_col_addr;
- unsigned char num_banks;
- unsigned char bank_size_id;
- unsigned long ctrl_bank_num[MAXBANKS];
- unsigned long bx_cr_num;
- unsigned long largest_size_index;
- unsigned long largest_size;
- unsigned long current_size_index;
- BANKPARMS bank_parms[MAXBXCR];
- unsigned long sorted_bank_num[MAXBXCR]; /* DDR Controller bank number table (sorted by size) */
- unsigned long sorted_bank_size[MAXBXCR]; /* DDR Controller bank size table (sorted by size)*/
-
- /*
- * Set the BxCR regs. First, wipe out the bank config registers.
- */
- for (bx_cr_num = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
- mtdcr(memcfga, mem_b0cr + (bx_cr_num << 2));
- mtdcr(memcfgd, 0x00000000);
- bank_parms[bx_cr_num].bank_size_bytes = 0;
- }
-
-#ifdef CONFIG_BAMBOO
- /*
- * This next section is hardware dependent and must be programmed
- * to match the hardware. For bammboo, the following holds...
- * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0
- * 2. SDRAM0_B1CR: Bank 0 of dimm 1 ctrl_bank_num : 1
- * 3. SDRAM0_B2CR: Bank 1 of dimm 1 ctrl_bank_num : 1
- * 4. SDRAM0_B3CR: Bank 0 of dimm 2 ctrl_bank_num : 3
- * ctrl_bank_num corresponds to the first usable DDR controller bank number by DIMM
- */
- ctrl_bank_num[0] = 0;
- ctrl_bank_num[1] = 1;
- ctrl_bank_num[2] = 3;
-#else
- ctrl_bank_num[0] = 0;
- ctrl_bank_num[1] = 1;
- ctrl_bank_num[2] = 2;
- ctrl_bank_num[3] = 3;
-#endif
-
- /*
- * reset the bank_base address
- */
- bank_base_addr = CFG_SDRAM_BASE;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
- num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
- num_banks = spd_read(iic0_dimm_addr[dimm_num], 5);
- bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
-
- /*
- * Set the SDRAM0_BxCR regs
- */
- cr = 0;
- switch (bank_size_id) {
- case 0x02:
- cr |= SDRAM_BXCR_SDSZ_8;
- break;
- case 0x04:
- cr |= SDRAM_BXCR_SDSZ_16;
- break;
- case 0x08:
- cr |= SDRAM_BXCR_SDSZ_32;
- break;
- case 0x10:
- cr |= SDRAM_BXCR_SDSZ_64;
- break;
- case 0x20:
- cr |= SDRAM_BXCR_SDSZ_128;
- break;
- case 0x40:
- cr |= SDRAM_BXCR_SDSZ_256;
- break;
- case 0x80:
- cr |= SDRAM_BXCR_SDSZ_512;
- break;
- default:
- printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
- dimm_num);
- printf("ERROR: Unsupported value for the banksize: %d.\n",
- bank_size_id);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
- }
-
- switch (num_col_addr) {
- case 0x08:
- cr |= SDRAM_BXCR_SDAM_1;
- break;
- case 0x09:
- cr |= SDRAM_BXCR_SDAM_2;
- break;
- case 0x0A:
- cr |= SDRAM_BXCR_SDAM_3;
- break;
- case 0x0B:
- cr |= SDRAM_BXCR_SDAM_4;
- break;
- default:
- printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
- dimm_num);
- printf("ERROR: Unsupported value for number of "
- "column addresses: %d.\n", num_col_addr);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
- }
-
- /*
- * enable the bank
- */
- cr |= SDRAM_BXCR_SDBE;
-
- for (i = 0; i < num_banks; i++) {
- bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
- (4 * 1024 * 1024) * bank_size_id;
- bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
- }
- }
- }
-
- /* Initialize sort tables */
- for (i = 0; i < MAXBXCR; i++) {
- sorted_bank_num[i] = i;
- sorted_bank_size[i] = bank_parms[i].bank_size_bytes;
- }
-
- for (i = 0; i < MAXBXCR-1; i++) {
- largest_size = sorted_bank_size[i];
- largest_size_index = 255;
-
- /* Find the largest remaining value */
- for (j = i + 1; j < MAXBXCR; j++) {
- if (sorted_bank_size[j] > largest_size) {
- /* Save largest remaining value and its index */
- largest_size = sorted_bank_size[j];
- largest_size_index = j;
- }
- }
-
- if (largest_size_index != 255) {
- /* Swap the current and largest values */
- current_size_index = sorted_bank_num[largest_size_index];
- sorted_bank_size[largest_size_index] = sorted_bank_size[i];
- sorted_bank_size[i] = largest_size;
- sorted_bank_num[largest_size_index] = sorted_bank_num[i];
- sorted_bank_num[i] = current_size_index;
- }
- }
-
- /* Set the SDRAM0_BxCR regs thanks to sort tables */
- for (bx_cr_num = 0, bank_base_addr = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
- if (bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes) {
- mtdcr(memcfga, mem_b0cr + (sorted_bank_num[bx_cr_num] << 2));
- temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK |
- SDRAM_BXCR_SDAM_MASK | SDRAM_BXCR_SDBE);
- temp = temp | (bank_base_addr & SDRAM_BXCR_SDBA_MASK) |
- bank_parms[sorted_bank_num[bx_cr_num]].cr;
- mtdcr(memcfgd, temp);
- bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes;
- }
- }
-
- return(bank_base_addr);
-}
-
-void program_ecc (unsigned long num_bytes)
-{
- unsigned long bank_base_addr;
- unsigned long current_address;
- unsigned long end_address;
- unsigned long address_increment;
- unsigned long cfg0;
-
- /*
- * get Memory Controller Options 0 data
- */
- mfsdram(mem_cfg0, cfg0);
-
- /*
- * reset the bank_base address
- */
- bank_base_addr = CFG_SDRAM_BASE;
-
- if ((cfg0 & SDRAM_CFG0_MCHK_MASK) != SDRAM_CFG0_MCHK_NON) {
- mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
- SDRAM_CFG0_MCHK_GEN);
-
- if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) {
- address_increment = 4;
- } else {
- address_increment = 8;
- }
-
- current_address = (unsigned long)(bank_base_addr);
- end_address = (unsigned long)(bank_base_addr) + num_bytes;
-
- while (current_address < end_address) {
- *((unsigned long*)current_address) = 0x00000000;
- current_address += address_increment;
- }
-
- mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
- SDRAM_CFG0_MCHK_CHK);
- }
-}
-
-#endif /* CONFIG_440 */
-
-#endif /* CONFIG_SPD_EEPROM */
projects / project / bcm63xx / u-boot.git / commitdiff