ifeq ($(LINUX_VERSION),3.7.10)
LINUX_KERNEL_MD5SUM:=09624c3702107076efcac5e1cd8a18ec
endif
-ifeq ($(LINUX_VERSION),3.8.8)
- LINUX_KERNEL_MD5SUM:=3b4feff68460881a5dde1307fe1ce87f
+ifeq ($(LINUX_VERSION),3.8.9)
+ LINUX_KERNEL_MD5SUM:=b5286ad3d8a729e9ae48b26211e05aec
endif
# disable the md5sum check for unknown kernel versions
BOARD:=adm5120
BOARDNAME:=Infineon/ADMtek ADM5120
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
SUBTARGETS:=router_le router_be rb1xx
INITRAMFS_EXTRA_FILES:=
CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely
SUBTARGETS:=generic nand
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
#include <asm/uaccess.h>
#include <linux/proc_fs.h>
-@@ -763,10 +764,10 @@ static void tcp_v6_send_response(struct
+@@ -763,10 +764,10 @@ static void tcp_v6_send_response(struct
topt = (__be32 *)(t1 + 1);
if (ts) {
if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
fl6.flowi6_mark = skb->mark;
-@@ -1240,7 +1240,7 @@ static int ip6gre_header(struct sk_buff
+@@ -1240,7 +1240,7 @@ static int ip6gre_header(struct sk_buff
struct ipv6hdr *ipv6h = (struct ipv6hdr *)skb_push(skb, t->hlen);
__be16 *p = (__be16 *)(ipv6h+1);
#include <linux/netdevice.h>
--- a/include/net/inet_ecn.h
+++ b/include/net/inet_ecn.h
-@@ -115,13 +115,13 @@ static inline int IP6_ECN_set_ce(struct
+@@ -115,13 +115,13 @@ static inline int IP6_ECN_set_ce(struct
{
if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
return 0;
ptr = ip6hoff + sizeof(struct ipv6hdr);
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
-@@ -77,8 +77,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
+@@ -77,8 +77,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
if (!pskb_may_pull(skb, hlen))
return -EINVAL;
FEATURES:=squashfs jffs2 targz ext2 usb
CFLAGS:=-Os -pipe -march=armv5te -mtune=arm926ej-s -fno-caller-saves
-LINUX_VERSION:=3.8.7
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
-@@ -335,6 +335,12 @@ config MACH_NEOCORE926
+@@ -358,6 +358,12 @@ config MACH_NEOCORE926
help
Select this if you are using the Adeneo Neocore 926 board.
# ----------------------------------------------------------
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
-@@ -58,6 +58,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += boar
+@@ -67,6 +67,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += boar
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o
obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -579,7 +579,7 @@ static struct platform_device at91sam926
+@@ -507,7 +507,7 @@ static struct platform_device at91sam926
.num_resources = ARRAY_SIZE(spi1_resources),
};
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
-@@ -94,49 +94,49 @@ static struct gpio_led flexibity_leds[]
+@@ -89,49 +89,49 @@ static struct gpio_led flexibity_leds[]
.name = "usb1:green",
.gpio = AT91_PIN_PA12,
.active_low = 1,
BOARDNAME:=Atheros AR231x/AR5312
FEATURES:=squashfs jffs2
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
FEATURES:=squashfs
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
+#endif /* BCM47XXSFLASH */
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -528,6 +528,7 @@ struct bcma_sflash {
+@@ -529,6 +529,7 @@ struct bcma_sflash {
u32 size;
struct mtd_info *mtd;
#define SSB_CHIPCO_BCAST_ADDR 0x0050
#define SSB_CHIPCO_BCAST_DATA 0x0054
#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */
-@@ -503,7 +516,7 @@
+@@ -504,7 +517,7 @@
#define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */
#define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
#define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */
#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
-@@ -594,6 +607,9 @@ struct ssb_chipcommon {
+@@ -595,6 +608,9 @@ struct ssb_chipcommon {
struct ssb_chipcommon_pmu pmu;
u32 ticks_per_ms;
u32 max_timer_ms;
/** ChipCommon core registers. **/
#define BCMA_CC_ID 0x0000
-@@ -519,19 +520,6 @@ struct bcma_pflash {
+@@ -520,19 +521,6 @@ struct bcma_pflash {
u32 window_size;
};
#ifdef CONFIG_BCMA_NFLASH
struct mtd_info;
-@@ -565,7 +553,7 @@ struct bcma_drv_cc {
+@@ -566,7 +554,7 @@ struct bcma_drv_cc {
#ifdef CONFIG_BCMA_DRIVER_MIPS
struct bcma_pflash pflash;
#ifdef CONFIG_BCMA_SFLASH
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751M)},
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751F),
-@@ -570,7 +572,9 @@ static void _tw32_flush(struct tg3 *tp,
+@@ -571,7 +573,9 @@ static void _tw32_flush(struct tg3 *tp,
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
{
tp->write32_mbox(tp, off, val);
tp->read32_mbox(tp, off);
}
-@@ -580,7 +584,8 @@ static void tg3_write32_tx_mbox(struct t
+@@ -581,7 +585,8 @@ static void tg3_write32_tx_mbox(struct t
writel(val, mbox);
if (tg3_flag(tp, TXD_MBOX_HWBUG))
writel(val, mbox);
readl(mbox);
}
-@@ -1088,7 +1093,8 @@ static void tg3_switch_clocks(struct tg3
+@@ -1089,7 +1094,8 @@ static void tg3_switch_clocks(struct tg3
#define PHY_BUSY_LOOPS 5000
{
u32 frame_val;
unsigned int loops;
-@@ -1104,7 +1110,7 @@ static int tg3_readphy(struct tg3 *tp, i
+@@ -1105,7 +1111,7 @@ static int tg3_readphy(struct tg3 *tp, i
*val = 0x0;
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
-@@ -1141,7 +1147,13 @@ static int tg3_readphy(struct tg3 *tp, i
+@@ -1142,7 +1148,13 @@ static int tg3_readphy(struct tg3 *tp, i
return ret;
}
{
u32 frame_val;
unsigned int loops;
-@@ -1159,7 +1171,7 @@ static int tg3_writephy(struct tg3 *tp,
+@@ -1160,7 +1172,7 @@ static int tg3_writephy(struct tg3 *tp,
tg3_ape_lock(tp, tp->phy_ape_lock);
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
-@@ -1194,6 +1206,11 @@ static int tg3_writephy(struct tg3 *tp,
+@@ -1195,6 +1207,11 @@ static int tg3_writephy(struct tg3 *tp,
return ret;
}
static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val)
{
int err;
-@@ -1778,6 +1795,11 @@ static int tg3_poll_fw(struct tg3 *tp)
+@@ -1779,6 +1796,11 @@ static int tg3_poll_fw(struct tg3 *tp)
int i;
u32 val;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
/* Wait up to 20ms for init done. */
for (i = 0; i < 200; i++) {
-@@ -3443,6 +3465,13 @@ static int tg3_halt_cpu(struct tg3 *tp,
+@@ -3444,6 +3466,13 @@ static int tg3_halt_cpu(struct tg3 *tp,
tw32_f(offset + CPU_MODE, CPU_MODE_HALT);
udelay(10);
} else {
for (i = 0; i < 10000; i++) {
tw32(offset + CPU_STATE, 0xffffffff);
tw32(offset + CPU_MODE, CPU_MODE_HALT);
-@@ -3910,8 +3939,9 @@ static int tg3_power_down_prepare(struct
+@@ -3911,8 +3940,9 @@ static int tg3_power_down_prepare(struct
tg3_frob_aux_power(tp, true);
/* Workaround for unstable PLL clock */
u32 val = tr32(0x7d00);
val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
-@@ -4439,6 +4469,15 @@ relink:
+@@ -4440,6 +4470,15 @@ relink:
if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
tg3_phy_copper_begin(tp);
tg3_readphy(tp, MII_BMSR, &bmsr);
if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) ||
(tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
-@@ -4457,6 +4496,26 @@ relink:
+@@ -4458,6 +4497,26 @@ relink:
else
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
if (tp->link_config.active_duplex == DUPLEX_HALF)
tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
-@@ -8435,6 +8494,16 @@ static int tg3_chip_reset(struct tg3 *tp
+@@ -8436,6 +8495,16 @@ static int tg3_chip_reset(struct tg3 *tp
tw32(0x5000, 0x400);
}
tw32(GRC_MODE, tp->grc_mode);
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
-@@ -10068,6 +10137,11 @@ static void tg3_timer(unsigned long __op
+@@ -10084,6 +10153,11 @@ static void tg3_timer(unsigned long __op
tg3_flag(tp, 57765_CLASS))
tg3_chk_missed_msi(tp);
if (!tg3_flag(tp, TAGGED_STATUS)) {
/* All of this garbage is because when using non-tagged
* IRQ status the mailbox/status_block protocol the chip
-@@ -12941,7 +13015,8 @@ static int tg3_ioctl(struct net_device *
+@@ -12957,7 +13031,8 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
spin_unlock_bh(&tp->lock);
data->val_out = mii_regval;
-@@ -12957,7 +13032,8 @@ static int tg3_ioctl(struct net_device *
+@@ -12973,7 +13048,8 @@ static int tg3_ioctl(struct net_device *
return -EAGAIN;
spin_lock_bh(&tp->lock);
spin_unlock_bh(&tp->lock);
return err;
-@@ -13810,6 +13886,14 @@ static void tg3_get_5720_nvram_info(stru
+@@ -13826,6 +13902,14 @@ static void tg3_get_5720_nvram_info(stru
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
static void tg3_nvram_init(struct tg3 *tp)
{
tw32_f(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
-@@ -14302,10 +14386,19 @@ static int tg3_phy_probe(struct tg3 *tp)
+@@ -14318,10 +14402,19 @@ static int tg3_phy_probe(struct tg3 *tp)
* subsys device table.
*/
p = tg3_lookup_by_subsys(tp);
if (!tp->phy_id ||
tp->phy_id == TG3_PHY_ID_BCM8002)
tp->phy_flags |= TG3_PHYFLG_PHY_SERDES;
-@@ -15353,6 +15446,11 @@ static int tg3_get_invariants(struct tg3
+@@ -15369,6 +15462,11 @@ static int tg3_get_invariants(struct tg3
}
}
/* Get eeprom hw config before calling tg3_set_power_state().
* In particular, the TG3_FLAG_IS_NIC flag must be
* determined before calling tg3_set_power_state() so that
-@@ -15686,12 +15784,19 @@ static int tg3_get_device_address(struct
+@@ -15702,12 +15800,19 @@ static int tg3_get_device_address(struct
struct net_device *dev = tp->dev;
u32 hi, lo, mac_offset;
int addr_ok = 0;
mac_offset = 0x7c;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
tg3_flag(tp, 5780_CLASS)) {
-@@ -16052,6 +16157,8 @@ static int tg3_test_dma(struct tg3 *tp)
+@@ -16068,6 +16173,8 @@ static int tg3_test_dma(struct tg3 *tp)
tp->dma_rwctrl |= 0x001b000f;
}
}
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
-@@ -16396,6 +16503,18 @@ static int tg3_init_one(struct pci_dev *
+@@ -16412,6 +16519,18 @@ static int tg3_init_one(struct pci_dev *
else
tp->msg_enable = TG3_DEF_MSG_ENABLE;
* setting below.
--- a/drivers/net/ethernet/broadcom/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
-@@ -3030,6 +3030,11 @@ enum TG3_FLAGS {
+@@ -3032,6 +3032,11 @@ enum TG3_FLAGS {
TG3_FLAG_57765_PLUS,
TG3_FLAG_57765_CLASS,
TG3_FLAG_5717_PLUS,
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -264,7 +264,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
+@@ -280,7 +280,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
}
/* query bus clock frequency for PMU-enabled chipcommon */
{
struct bcma_bus *bus = cc->core->bus;
-@@ -293,6 +293,7 @@ static u32 bcma_pmu_get_bus_clock(struct
+@@ -309,6 +309,7 @@ static u32 bcma_pmu_get_bus_clock(struct
}
return BCMA_CC_PMU_HT_CLOCK;
}
+#endif /* _BGMAC_H */
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -623,4 +623,6 @@ extern void bcma_chipco_regctl_maskset(s
+@@ -626,4 +626,6 @@ extern void bcma_chipco_regctl_maskset(s
u32 offset, u32 mask, u32 set);
extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
BOARD:=brcm63xx
BOARDNAME:=Broadcom BCM63xx
FEATURES:=squashfs jffs2 usb atm pci pcmcia
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
include $(INCLUDE_DIR)/target.mk
FEATURES:=squashfs
CFLAGS:=-Os -pipe -march=armv4 -mtune=fa526 -fno-caller-saves
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
CFLAGS:=-Os -pipe -march=armv6k -mtune=mpcore -mfloat-abi=softfp -mfpu=vfp -fno-caller-saves
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
CFLAGS:=-Os -pipe -march=armv4t -fno-caller-saves
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
DEVICE_TYPE:=developerboard
+}
--- a/drivers/ssb/driver_gpio.c
+++ b/drivers/ssb/driver_gpio.c
-@@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct
+@@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct
ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
}
static inline u32 mips_read32(struct ssb_mipscore *mcore,
u16 offset)
-@@ -189,34 +209,43 @@ static void ssb_mips_serial_init(struct
+@@ -189,34 +209,43 @@ static void ssb_mips_serial_init(struct
static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
{
struct ssb_bus *bus = mcore->dev->bus;
#endif /* CONFIG_SSB_DRIVER_MIPS */
#endif /* LINUX_SSB_MIPSCORE_H_ */
---- a/drivers/net/wireless/b43/phy_n.c
-+++ b/drivers/net/wireless/b43/phy_n.c
-@@ -5165,7 +5165,8 @@ static void b43_nphy_pmu_spur_avoid(stru
- #endif
- #ifdef CONFIG_B43_SSB
- case B43_BUS_SSB:
-- /* FIXME */
-+ ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
-+ avoid);
- break;
- #endif
- }
---- a/drivers/ssb/driver_chipcommon_pmu.c
-+++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -675,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_
- return 0;
- }
- }
-+
-+void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
-+{
-+ u32 pmu_ctl = 0;
-+
-+ switch (cc->dev->bus->chip_id) {
-+ case 0x4322:
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
-+ if (spuravoid == 1)
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
-+ else
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
-+ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
-+ break;
-+ case 43222:
-+ /* TODO: BCM43222 requires updating PLLs too */
-+ return;
-+ default:
-+ ssb_printk(KERN_ERR PFX
-+ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
-+ cc->dev->bus->chip_id);
-+ return;
-+ }
-+
-+ chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
-+}
-+EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
}
/* Revs 4 5 and 8 have partially shared layout */
---- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -219,6 +219,7 @@
- #define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */
- #define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
- #define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16
-+#define SSB_CHIPCO_PMU_CTL_PLL_UPD 0x00000400
- #define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
- #define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
- #define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
-@@ -667,5 +668,6 @@ enum ssb_pmu_ldo_volt_id {
- void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
- enum ssb_pmu_ldo_volt_id id, u32 voltage);
- void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
-+void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
-
- #endif /* LINUX_SSB_CHIPCO_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -289,11 +289,11 @@
return cap_ptr;
/* check if the capability pointer field exists */
-@@ -426,7 +429,7 @@ void bcma_core_pci_hostmode_init(struct
+@@ -426,7 +429,7 @@ void bcma_core_pci_hostmode_init(struct
/* Reset RC */
usleep_range(3000, 5000);
pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
BCMA_CORE_PCI_CTL_RST_OE);
-@@ -488,6 +491,17 @@ void bcma_core_pci_hostmode_init(struct
+@@ -488,6 +491,17 @@ void bcma_core_pci_hostmode_init(struct
bcma_core_pci_enable_crs(pc);
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
return 0;
-@@ -595,6 +609,6 @@ int bcma_core_pci_pcibios_map_irq(const
+@@ -595,6 +609,6 @@ int bcma_core_pci_pcibios_map_irq(const
pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
pci_ops);
* When we die, we re-parent all our children, and try to:
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
-@@ -3634,6 +3634,7 @@ int can_nice(const struct task_struct *p
+@@ -3636,6 +3636,7 @@ int can_nice(const struct task_struct *p
return (nice_rlim <= task_rlimit(p, RLIMIT_NICE) ||
capable(CAP_SYS_NICE));
}
FEATURES:=squashfs jffs2
SUBTARGETS=xway ase falcon
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
CFLAGS=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely
INITRAMFS_EXTRA_FILES:=
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
DEVICE_TYPE:=developerboard
CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=603e
FEATURES:=targz ext4
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
FEATURES:=squashfs targz
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
FEATURES:=spe_fpu squashfs
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
CFLAGS:=-Os -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=softfp
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=405
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=440
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
CFLAGS:=-Os -pipe -fno-caller-saves -mno-branch-likely
FEATURES:=squashfs gpio
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES+=\
BOARDNAME:=Mikrotik RouterBoard 532
FEATURES:=jffs2 pci targz broken
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += wpad-mini kmod-madwifi kmod-input-rb532
CFLAGS:=-Os -pipe -march=armv6k -mtune=mpcore -mfloat-abi=softfp -mfpu=vfp -fno-caller-saves
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
DEVICE_TYPE:=developerboard
FEATURES:=ext4 audio
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
include $(INCLUDE_DIR)/target.mk
kmod-ledtrig-heartbeat kmod-ledtrig-gpio \
kmod-ledtrig-netdev \
kmod-cpu-msr hwclock wpad
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
CS5535_MASK:=0x0b000042
CFLAGS += -march=geode -Os -mmmx -m3dnow -fno-align-jumps -fno-align-functions \
BOARDNAME:=Generic
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
define Target/Description
Build firmware images for x86 based boards
FEATURES:=jffs2 targz ubifs audio broken
SUBTARGETS:=qi_lb60 n516 n526 id800wt
-LINUX_VERSION:=3.8.8
+LINUX_VERSION:=3.8.9
DEVICE_TYPE=other
projects / openwrt / staging / zorun.git / commitdiff