m68knommu: switch 68328 timer to use GENERIC_TIME
authorGreg Ungerer <gerg@snapgear.com>
Fri, 1 Feb 2008 07:40:17 +0000 (17:40 +1000)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 1 Feb 2008 10:02:03 +0000 (21:02 +1100)
Switch the 68328 CPU timer code to using GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/m68knommu/platform/68328/timers.c

index 04cbc661d4bdc16faf3e09f932186114b2fe4295..9159fd05c9ac7638e64af74f8f9502936142d721 100644 (file)
@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/clocksource.h>
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #define TICKS_PER_JIFFY        10
 #endif
 
+static u32 m68328_tick_cnt;
+
+/***************************************************************************/
+
+static irqreturn_t hw_tick(int irq, void *dummy)
+{
+       /* Reset Timer1 */
+       TSTAT &= 0;
+
+       m68328_tick_cnt += TICKS_PER_JIFFY;
+       return arch_timer_interrupt(irq, dummy);
+}
+
 /***************************************************************************/
 
 static irqreturn_t hw_tick(int irq, void *dummy)
@@ -69,6 +83,33 @@ static struct irqaction m68328_timer_irq = {
        .handler = hw_tick,
 };
 
+/***************************************************************************/
+
+static cycle_t m68328_read_clk(void)
+{
+       unsigned long flags;
+       u32 cycles;
+
+       local_irq_save(flags);
+       cycles = m68328_tick_cnt + TCN;
+       local_irq_restore(flags);
+
+       return cycles;
+}
+
+/***************************************************************************/
+
+static struct clocksource m68328_clk = {
+       .name   = "timer",
+       .rating = 250,
+       .read   = m68328_read_clk,
+       .shift  = 20,
+       .mask   = CLOCKSOURCE_MASK(32),
+       .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/***************************************************************************/
+
 void hw_timer_init(void)
 {
        /* disable timer 1 */
@@ -84,19 +125,8 @@ void hw_timer_init(void)
 
        /* Enable timer 1 */
        TCTL |= TCTL_TEN;
-}
-
-/***************************************************************************/
-
-unsigned long hw_timer_offset(void)
-{
-       unsigned long ticks = TCN, offset = 0;
-
-       /* check for pending interrupt */
-       if (ticks < (TICKS_PER_JIFFY >> 1) && (ISR & (1 << TMR_IRQ_NUM)))
-               offset = 1000000 / HZ;
-       ticks = (ticks * 1000000 / HZ) / TICKS_PER_JIFFY;
-       return ticks + offset;
+       m68328_clk.mult = clocksource_hz2mult(TICKS_PER_JIFFY*HZ, m68328_clk.shift);
+       clocksource_register(&m68328_clk);
 }
 
 /***************************************************************************/