comtrend,ar-5315u)
ucidef_set_led_usbdev "usb" "USB" "AR-5315u:green:usb" "1-1"
;;
+comtrend,vr-3032u)
+ ucidef_set_led_usbdev "usb" "USB" "vr-3032u:green:usb" "1-1"
+ ;;
huawei,echolife-hg553)
ucidef_set_led_netdev "lan" "LAN" "HW553:blue:lan" "eth0"
ucidef_set_led_usbdev "usb1" "USB1" "HW553:red:hspa" "1-1"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "8t@eth0"
;;
+comtrend,vr-3032u)
+ ucidef_add_switch "switch0" \
+ "0:lan:2" "1:lan:3" "2:lan:4" "3:lan:1" "8t@eth0"
+ ;;
comtrend,wap-5813n)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@eth0"
PART_NAME=linux
+REQUIRE_IMAGE_METADATA=0
+
platform_check_image() {
[ "$#" -gt 1 ] && return 1
+
+ case "$(board_name)" in
+ comtrend,vr-3032u)
+ # NAND sysupgrade
+ return 0
+ ;;
+ esac
+
case "$(get_magic_word "$1")" in
3600|3700|3800)
- # 6348GW-11 boards use openwrt-96348GW-11-squashfs-cfe.bin files
+ # CFE tag versions
return 0
;;
*)
esac
}
-# use default for platform_do_upgrade()
+cfe_jffs2_upgrade_tar() {
+ local tar_file="$1"
+ local kernel_mtd="$(find_mtd_index $CI_KERNPART)"
+
+ if [ -z "$kernel_mtd" ]; then
+ echo "$CI_KERNPART partition not found"
+ return 1
+ fi
+
+ local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+ board_dir=${board_dir%/}
+
+ local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c 2> /dev/null)
+ local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c 2> /dev/null)
+
+ if [ "$kernel_length" = 0 ]; then
+ echo "kernel cannot be empty"
+ return 1
+ fi
+
+ flash_erase -j /dev/mtd${kernel_mtd} 0 0
+ tar xf $tar_file ${board_dir}/kernel -O | nandwrite /dev/mtd${kernel_mtd} -
+
+ local rootfs_type="$(identify_tar "$tar_file" ${board_dir}/root)"
+
+ nand_upgrade_prepare_ubi "$rootfs_length" "$rootfs_type" "0" "0"
+
+ local ubidev="$( nand_find_ubi "$CI_UBIPART" )"
+
+ local root_ubivol="$(nand_find_volume $ubidev $CI_ROOTPART)"
+ tar xf $tar_file ${board_dir}/root -O | \
+ ubiupdatevol /dev/$root_ubivol -s $rootfs_length -
+
+ nand_do_upgrade_success
+}
+
+platform_do_upgrade() {
+ case "$(board_name)" in
+ comtrend,vr-3032u)
+ REQUIRE_IMAGE_METADATA=1
+ cfe_jffs2_upgrade_tar "$1"
+ ;;
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+
+#include "bcm63268.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Comtrend VR-3032u";
+ compatible = "comtrend,vr-3032u", "brcm,bcm63268";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs,ubifs noinitrd console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&pinctrl 33 1>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&pinctrl 34 1>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&leds {
+ status = "okay";
+ brcm,serial-leds;
+ brcm,serial-dat-low;
+ brcm,serial-shift-inv;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial_led>;
+
+ led@0 {
+ /* GPHY0 Spd 0 */
+ reg = <0>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <0>;
+ };
+
+ led@1 {
+ /* GPHY0 Spd 1 */
+ reg = <1>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <1>;
+ };
+
+ led@2 {
+ reg = <2>;
+ active-low;
+ label = "vr-3032u:red:inet";
+ };
+
+ led@3 {
+ reg = <3>;
+ active-low;
+ label = "vr-3032u:green:dsl";
+ };
+
+ led@4 {
+ reg = <4>;
+ active-low;
+ label = "vr-3032u:green:usb";
+ };
+
+ led@7 {
+ reg = <7>;
+ active-low;
+ label = "vr-3032u:green:wps";
+ };
+
+ led@8 {
+ reg = <8>;
+ active-low;
+ label = "vr-3032u:green:inet";
+ };
+
+ led@9 {
+ /* EPHY0 Act */
+ reg = <9>;
+ brcm,hardware-controlled;
+ };
+
+ led@10 {
+ /* EPHY1 Act */
+ reg = <10>;
+ brcm,hardware-controlled;
+ };
+
+ led@11 {
+ /* EPHY2 Act */
+ reg = <11>;
+ brcm,hardware-controlled;
+ };
+
+ led@12 {
+ /* GPHY0 Act */
+ reg = <12>;
+ brcm,hardware-controlled;
+ };
+
+ led@13 {
+ /* EPHY0 Spd */
+ reg = <13>;
+ brcm,hardware-controlled;
+ };
+
+ led@14 {
+ /* EPHY1 Spd */
+ reg = <14>;
+ brcm,hardware-controlled;
+ };
+
+ led@15 {
+ /* EPHY2 Spd */
+ reg = <15>;
+ brcm,hardware-controlled;
+ };
+
+ led_power_green: led@20 {
+ reg = <20>;
+ active-low;
+ label = "vr-3032u:green:power";
+ default-state = "on";
+ };
+};
+
+&nflash {
+ status = "okay";
+
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ reg = <0>;
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <15>;
+ nand-on-flash-bbt;
+ brcm,nand-oob-sector-size = <64>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "cferom";
+ reg = <0x0000000 0x0020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "brcm,wfi";
+ label = "wfi";
+ reg = <0x0020000 0x7ee0000>;
+ };
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
DEVICE_PACKAGES += nand-utils
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
endef
+
+### Comtrend ###
+define Device/comtrend_vr-3032u
+ $(Device/bcm63xx-nand)
+ DEVICE_VENDOR := Comtrend
+ DEVICE_MODEL := VR-3032u
+ CFE_CHIP_ID := 63268
+ SOC := bcm63168
+ CFE_RAM_FILE := comtrend,vr-3032u/cferam.000
+ CFE_RAM_JFFS2_NAME := cferam.000
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ VID_HDR_OFFSET := 2048
+ DEVICE_PACKAGES += $(USB2_PACKAGES)
+ CFE_WFI_FLASH_TYPE := 3
+endef
+TARGET_DEVICES += comtrend_vr-3032u
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2610,6 +2610,44 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_VR3032u = {
++ .name = "963168M-1841N1",
++ .expected_cpu_id = 0x63268,
++
++ .has_ehci0 = 1,
++ .has_ohci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "LAN2",
++ },
++
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "LAN3",
++ },
++
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "LAN4",
++ },
++
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "LAN1",
++ },
++ },
++ },
++};
++
+ static struct board_info __initdata board_vw6339gu = {
+ .name = "VW6339GU",
+ .expected_cpu_id = 0x63268,
+@@ -2804,6 +2842,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_63268
+ &board_963268bu_p300,
+ &board_963269bhr,
++ &board_VR3032u,
+ &board_vw6339gu,
+ &board_BSKYB_63168,
+ #endif
+@@ -2917,6 +2956,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_63268
+ { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, },
+ { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
++ { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, },
+ { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
+ { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
+ #endif
projects / openwrt / staging / jow.git / commitdiff