imx6: dts: update ventana dts

- fix spi chipselect for GW5400-A
- fix audmux pinctrl for GW54xx
- remove unused alias nodes
- remove unused regulator nodes (will be adding pmic nodes next)
- remove duplicate eeprom entries
- add regulator definitions
- fix sgtl5000 regulator reference
- add egalax touchscreen controller interrupt
- fix gw5400-a audmux pinctrl
- fix usb ehci alias

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38424

diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts
index 2f9215028a59aaa4fd657b2e679f05210614a4df..e4c6df6585e83599e2b3c97366e417f225125929 100644 (file)
--- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts
@@ -23,30 +23,15 @@
                i2c0 = &i2c1;
                i2c1 = &i2c2;
                i2c2 = &i2c3;
-               ipu0 = &ipu1;
                led0 = &led0;
                led1 = &led1;
                nand = &gpmi;
-               pwm0 = &pwm1;
-               pwm1 = &pwm2;
-               pwm2 = &pwm3;
-               pwm3 = &pwm4;
-               spi0 = &ecspi1;
-               spi1 = &ecspi2;
-               spi2 = &ecspi3;
-               spi3 = &ecspi4;
-               ssi0 = &ssi1;
-               ssi1 = &ssi2;
-               usb0 = &usbh3;
+               usb0 = &usbh1;
                usb1 = &usbotg;
-               usdhc0 = &usdhc1;
-               usdhc1 = &usdhc2;
-               usdhc2 = &usdhc3;
-               usdhc3 = &usdhc4;
        };
 
        memory {
-               reg = <0x10000000 0x40000000>;
+               reg = <0x10000000 0x20000000>;
        };
 
        leds {
@@ -69,14 +54,6 @@
        regulators {
                compatible = "simple-bus";
 
-               reg_2p5v: 2p5v {
-                       compatible = "regulator-fixed";
-                       regulator-name = "2P5V";
-                       regulator-min-microvolt = <2500000>;
-                       regulator-max-microvolt = <2500000>;
-                       regulator-always-on;
-               };
-
                reg_3p3v: 3p3v {
                        compatible = "regulator-fixed";
                        regulator-name = "3P3V";
@@ -85,6 +62,14 @@
                        regulator-always-on;
                };
 
+               reg_5p0v: 5p0v {
+                       compatible = "regulator-fixed";
+                       regulator-name = "5P0V";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       regulator-always-on;
+               };
+
                reg_usb_otg_vbus: usb_otg_vbus {
                        compatible = "regulator-fixed";
                        regulator-name = "usb_otg_vbus";
@@ -111,16 +96,10 @@
 };
 
 &i2c1 {
-       status = "okay";
        clock-frequency = <100000>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c1_1>;
-
-       eeprom: eeprom@50 {
-               compatible = "atmel,24c02";
-               reg = <0x50>;
-               pagesize = <16>;
-       };
+       status = "okay";
 
        eeprom1: eeprom@50 {
                compatible = "atmel,24c02";
@@ -146,11 +125,6 @@
                pagesize = <16>;
        };
 
-       rtc: ds1672@68 {
-               compatible = "dallas,ds1672";
-               reg = <0x68>;
-       };
-
        gpio: pca9555@23 {
                compatible = "nxp,pca9555";
                reg = <0x23>;
@@ -162,20 +136,72 @@
                compatible = "gw,gsp";
                reg = <0x29>;
        };
+
+       rtc: ds1672@68 {
+               compatible = "dallas,ds1672";
+               reg = <0x68>;
+       };
 };
 
 &i2c2 {
-       status = "okay";
        clock-frequency = <100000>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c2_2>;
+       status = "okay";
+
+       pmic: ltc3676@3c {
+               compatible = "ltc,ltc3676";
+               reg = <0x3c>;
+
+               regulators {
+                       sw1_reg: ltc3676__sw1 {
+                               regulator-min-microvolt = <1175000>;
+                               regulator-max-microvolt = <1175000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw2_reg: ltc3676__sw2 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw3_reg: ltc3676__sw3 {
+                               regulator-min-microvolt = <1175000>;
+                               regulator-max-microvolt = <1175000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw4_reg: ltc3676__sw4 {
+                               regulator-min-microvolt = <1500000>;
+                               regulator-max-microvolt = <1500000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo2_reg: ltc3676__ldo2 {
+                               regulator-min-microvolt = <2500000>;
+                               regulator-max-microvolt = <2500000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo4_reg: ltc3676__ldo4 {
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+                       };
+               };
+       };
 };
 
 &i2c3 {
-       status = "okay";
        clock-frequency = <100000>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c3_2>;
+       status = "okay";
 
        videoin: adv7180@20 {
                compatible = "adi,adv7180";
@@ -190,13 +216,13 @@
        hog {
                pinctrl_hog: hoggrp {
                        fsl,pins = <
-                               MX6DL_PAD_KEY_COL0__GPIO4_IO06  0x80000000 /* user1 led */
-                               MX6DL_PAD_KEY_ROW0__GPIO4_IO07  0x80000000 /* user2 led */
-                               MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
-                               MX6DL_PAD_EIM_D22__GPIO3_IO22   0x80000000 /* OTG_PWR_EN */
-                               MX6DL_PAD_GPIO_0__GPIO1_IO00    0x80000000 /* PCIE_RST# */
                                MX6DL_PAD_EIM_A19__GPIO2_IO19   0x80000000 /* MEZZ_DIO0 */
                                MX6DL_PAD_EIM_A20__GPIO2_IO18   0x80000000 /* MEZZ_DIO1 */
+                               MX6DL_PAD_EIM_D22__GPIO3_IO22   0x80000000 /* OTG_PWR_EN */
+                               MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+                               MX6DL_PAD_GPIO_0__GPIO1_IO00    0x80000000 /* PCIE_RST# */
+                               MX6DL_PAD_KEY_COL0__GPIO4_IO06  0x80000000 /* user1 led */
+                               MX6DL_PAD_KEY_ROW0__GPIO4_IO07  0x80000000 /* user2 led */
                         >;
                };
        };
@@ -231,6 +257,14 @@
        status = "okay";
 };
 
+&usbotg {
+       vbus-supply = <&reg_usb_otg_vbus>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg_1>;
+       disable-over-current;
+       status = "okay";
+};
+
 &usbh1 {
        status = "okay";
 };

diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts
index a027ed9db7c8920e1b398fac8d06429a5dfb46ce..825d952ba2064b52c2da3113308ad37296861289 100644 (file)
--- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -23,29 +23,15 @@
                i2c0 = &i2c1;
                i2c1 = &i2c2;
                i2c2 = &i2c3;
-               ipu0 = &ipu1;
-               ipu1 = &ipu2;
                led0 = &led0;
                led1 = &led1;
                led2 = &led2;
-               pwm0 = &pwm1;
-               pwm1 = &pwm2;
-               pwm2 = &pwm3;
-               pwm3 = &pwm4;
                sky2 = &eth1;
                ssi0 = &ssi1;
-               ssi1 = &ssi2;
                spi0 = &ecspi1;
-               spi1 = &ecspi2;
-               spi2 = &ecspi3;
-               spi3 = &ecspi4;
-               spi4 = &ecspi5;
-               usb0 = &usbh3;
+               usb0 = &usbh1;
                usb1 = &usbotg;
-               usdhc0 = &usdhc1;
-               usdhc1 = &usdhc2;
                usdhc2 = &usdhc3;
-               usdhc3 = &usdhc4;
        };
 
        chosen {
@@ -82,11 +68,11 @@
        regulators {
                compatible = "simple-bus";
 
-               reg_2p5v: 2p5v {
+               reg_1p0v: 1p0v {
                        compatible = "regulator-fixed";
-                       regulator-name = "2P5V";
-                       regulator-min-microvolt = <2500000>;
-                       regulator-max-microvolt = <2500000>;
+                       regulator-name = "1P0V";
+                       regulator-min-microvolt = <1000000>;
+                       regulator-max-microvolt = <1000000>;
                        regulator-always-on;
                };
 
@@ -98,6 +84,14 @@
                        regulator-always-on;
                };
 
+               reg_usb_h1_vbus: usb_h1_vbus {
+                       compatible = "regulator-fixed";
+                       regulator-name = "usb_h1_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       regulator-always-on;
+               };
+
                reg_usb_otg_vbus: usb_otg_vbus {
                        compatible = "regulator-fixed";
                        regulator-name = "usb_otg_vbus";
@@ -125,7 +119,7 @@
 
 &audmux {
        pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_audmux_3>;
+       pinctrl-0 = <&pinctrl_audmux_1>;
        status = "okay";
 };
 
@@ -152,16 +146,10 @@
 };
 
 &i2c1 {
-       status = "okay";
        clock-frequency = <100000>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c1_1>;
-
-       eeprom: eeprom@50 {
-               compatible = "atmel,24c02";
-               reg = <0x50>;
-               pagesize = <16>;
-       };
+       status = "okay";
 
        eeprom1: eeprom@50 {
                compatible = "atmel,24c02";
@@ -187,11 +175,6 @@
                pagesize = <16>;
        };
 
-       rtc: ds1672@68 {
-               compatible = "dallas,ds1672";
-               reg = <0x68>;
-       };
-
        gpio: pca9555@23 {
                compatible = "nxp,pca9555";
                reg = <0x23>;
@@ -203,17 +186,116 @@
                compatible = "gw,gsp";
                reg = <0x29>;
        };
+
+       rtc: ds1672@68 {
+               compatible = "dallas,ds1672";
+               reg = <0x68>;
+       };
 };
 
 &i2c2 {
-       status = "okay";
        clock-frequency = <100000>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c2_2>;
+       status = "okay";
 
-       pmic: pfuze@08 {
+       pmic: pfuze100@08 {
                compatible = "fsl,pfuze100";
                reg = <0x08>;
+
+               regulators {
+                       sw1a_reg: sw1ab {
+                               regulator-min-microvolt = <300000>;
+                               regulator-max-microvolt = <1875000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                               regulator-ramp-delay = <6250>;
+                       };
+
+                       sw1c_reg: sw1c {
+                               regulator-min-microvolt = <300000>;
+                               regulator-max-microvolt = <1875000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                               regulator-ramp-delay = <6250>;
+                       };
+
+                       sw2_reg: sw2 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <3950000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw3a_reg: sw3a {
+                               regulator-min-microvolt = <400000>;
+                               regulator-max-microvolt = <1975000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw3b_reg: sw3b {
+                               regulator-min-microvolt = <400000>;
+                               regulator-max-microvolt = <1975000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw4_reg: sw4 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       swbst_reg: swbst {
+                               regulator-min-microvolt = <5000000>;
+                               regulator-max-microvolt = <5150000>;
+                       };
+
+                       snvs_reg: vsnvs {
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <3000000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       vref_reg: vrefddr {
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       vgen1_reg: vgen1 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1550000>;
+                       };
+
+                       vgen2_reg: vgen2 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1550000>;
+                       };
+
+                       vgen3_reg: vgen3 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       vgen4_reg: vgen4 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       vgen5_reg: vgen5 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       vgen6_reg: vgen6 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+               };
        };
 
        pciswitch: pex8609@3f {
@@ -228,22 +310,35 @@
 };
 
 &i2c3 {
-       status = "okay";
        clock-frequency = <100000>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c3_2>;
+       status = "okay";
+
+       accelerometer: mma8450@1c {
+               compatible = "fsl,mma8450";
+               reg = <0x1c>;
+       };
 
        codec: sgtl5000@0a {
                compatible = "fsl,sgtl5000";
                reg = <0x0a>;
                clocks = <&clks 169>;
-               VDDA-supply = <&reg_2p5v>;
+               VDDA-supply = <&sw4_reg>;
                VDDIO-supply = <&reg_3p3v>;
        };
 
-       accelerometer: mma8450@1c {
-               compatible = "fsl,mma8450";
-               reg = <0x1c>;
+       hdmiin: adv7611@4c {
+               compatible = "adi,adv7611";
+               reg = <0x4c>;
+       };
+
+       touchscreen: egalax_ts@04 {
+               compatible = "eeti,egalax_ts";
+               reg = <0x04>;
+               interrupt-parent = <&gpio7>;
+               interrupts = <12 2>; /* gpio7_12 active low */
+               wakeup-gpios = <&gpio7 12 0>;
        };
 
        videoout: adv7393@2a {
@@ -255,17 +350,6 @@
                compatible = "adi,adv7180";
                reg = <0x20>;
        };
-
-       hdmiin: adv7611@4c {
-               compatible = "adi,adv7611";
-               reg = <0x4c>;
-       };
-
-       touchscreen: egalax_ts@04 {
-               compatible = "eeti,egalax_ts";
-               reg = <0x04>;
-               wakeup-gpios = <&gpio1 12 0>;
-       };
 };
 
 &iomuxc {
@@ -277,14 +361,15 @@
                        fsl,pins = <
                                MX6Q_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
                                MX6Q_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
+                               MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+                               MX6Q_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
+                               MX6Q_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
+                               MX6Q_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* TOUCH_IRQ# */
                                MX6Q_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
                                MX6Q_PAD_KEY_COL2__GPIO4_IO10   0x80000000 /* user2 led */
                                MX6Q_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
                                MX6Q_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
-                               MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-                               MX6Q_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
                                MX6Q_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
-                               MX6Q_PAD_GPIO_0__CCM_CLKO1      0x80000000 /* AUD4_MCK */
                         >;
                };
        };
@@ -332,12 +417,21 @@
 };
 
 &uart5 {
-       status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_uart5_1>;
+       status = "okay";
+};
+
+&usbotg {
+       vbus-supply = <&reg_usb_otg_vbus>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg_1>;
+       disable-over-current;
+       status = "okay";
 };
 
 &usbh1 {
+       vbus-supply = <&reg_usb_h1_vbus>;
        status = "okay";
 };
 

diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts
index 9c2c4471acfe50863eafc9ac455a3c729f7ae766..bc66c3eb4c096f2a979e26950fc83e460e975dd4 100644 (file)
--- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts
@@ -24,30 +24,15 @@
                i2c0 = &i2c1;
                i2c1 = &i2c2;
                i2c2 = &i2c3;
-               ipu0 = &ipu1;
-               ipu1 = &ipu2;
                led0 = &led0;
                led1 = &led1;
                led2 = &led2;
                nand = &gpmi;
-               pwm0 = &pwm1;
-               pwm1 = &pwm2;
-               pwm2 = &pwm3;
-               pwm3 = &pwm4;
                sky2 = &eth1;
-               spi0 = &ecspi1;
-               spi1 = &ecspi2;
-               spi2 = &ecspi3;
-               spi3 = &ecspi4;
-               spi4 = &ecspi5;
                ssi0 = &ssi1;
-               ssi1 = &ssi2;
-               usb0 = &usbh3;
+               usb0 = &usbh1;
                usb1 = &usbotg;
-               usdhc0 = &usdhc1;
-               usdhc1 = &usdhc2;
                usdhc2 = &usdhc3;
-               usdhc3 = &usdhc4;
        };
 
        chosen {
@@ -84,11 +69,11 @@
        regulators {
                compatible = "simple-bus";
 
-               reg_2p5v: 2p5v {
+               reg_1p0v: 1p0v {
                        compatible = "regulator-fixed";
-                       regulator-name = "2P5V";
-                       regulator-min-microvolt = <2500000>;
-                       regulator-max-microvolt = <2500000>;
+                       regulator-name = "1P0V";
+                       regulator-min-microvolt = <1000000>;
+                       regulator-max-microvolt = <1000000>;
                        regulator-always-on;
                };
 
@@ -100,6 +85,14 @@
                        regulator-always-on;
                };
 
+               reg_usb_h1_vbus: usb_h1_vbus {
+                       compatible = "regulator-fixed";
+                       regulator-name = "usb_h1_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       regulator-always-on;
+               };
+
                reg_usb_otg_vbus: usb_otg_vbus {
                        compatible = "regulator-fixed";
                        regulator-name = "usb_otg_vbus";
@@ -127,7 +120,7 @@
 
 &audmux {
        pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_audmux_3>;
+       pinctrl-0 = <&pinctrl_audmux_1>;
        status = "okay";
 };
 
@@ -150,16 +143,10 @@
 };
 
 &i2c1 {
-       status = "okay";
        clock-frequency = <100000>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c1_1>;
-
-       eeprom: eeprom@50 {
-               compatible = "atmel,24c02";
-               reg = <0x50>;
-               pagesize = <16>;
-       };
+       status = "okay";
 
        eeprom1: eeprom@50 {
                compatible = "atmel,24c02";
@@ -185,11 +172,6 @@
                pagesize = <16>;
        };
 
-       rtc: ds1672@68 {
-               compatible = "dallas,ds1672";
-               reg = <0x68>;
-       };
-
        gpio: pca9555@23 {
                compatible = "nxp,pca9555";
                reg = <0x23>;
@@ -201,17 +183,116 @@
                compatible = "gw,gsp";
                reg = <0x29>;
        };
+
+       rtc: ds1672@68 {
+               compatible = "dallas,ds1672";
+               reg = <0x68>;
+       };
 };
 
 &i2c2 {
-       status = "okay";
        clock-frequency = <100000>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c2_2>;
+       status = "okay";
 
-       pmic: pfuze@08 {
+       pmic: pfuze100@08 {
                compatible = "fsl,pfuze100";
                reg = <0x08>;
+
+               regulators {
+                       sw1a_reg: sw1ab {
+                               regulator-min-microvolt = <300000>;
+                               regulator-max-microvolt = <1875000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                               regulator-ramp-delay = <6250>;
+                       };
+
+                       sw1c_reg: sw1c {
+                               regulator-min-microvolt = <300000>;
+                               regulator-max-microvolt = <1875000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                               regulator-ramp-delay = <6250>;
+                       };
+
+                       sw2_reg: sw2 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <3950000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw3a_reg: sw3a {
+                               regulator-min-microvolt = <400000>;
+                               regulator-max-microvolt = <1975000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw3b_reg: sw3b {
+                               regulator-min-microvolt = <400000>;
+                               regulator-max-microvolt = <1975000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       sw4_reg: sw4 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       swbst_reg: swbst {
+                               regulator-min-microvolt = <5000000>;
+                               regulator-max-microvolt = <5150000>;
+                       };
+
+                       snvs_reg: vsnvs {
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <3000000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       vref_reg: vrefddr {
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       vgen1_reg: vgen1 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1550000>;
+                       };
+
+                       vgen2_reg: vgen2 {
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1550000>;
+                       };
+
+                       vgen3_reg: vgen3 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       vgen4_reg: vgen4 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       vgen5_reg: vgen5 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       vgen6_reg: vgen6 {
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+               };
        };
 
        pciswitch: pex8609@3f {
@@ -226,22 +307,35 @@
 };
 
 &i2c3 {
-       status = "okay";
        clock-frequency = <100000>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c3_2>;
+       status = "okay";
+
+       accelerometer: fxos8700@1e {
+               compatible = "fsl,fxos8700";
+               reg = <0x1e>;
+       };
 
        codec: sgtl5000@0a {
                compatible = "fsl,sgtl5000";
                reg = <0x0a>;
                clocks = <&clks 169>;
-               VDDA-supply = <&reg_2p5v>;
+               VDDA-supply = <&sw4_reg>;
                VDDIO-supply = <&reg_3p3v>;
        };
 
-       accelerometer: mma8450@1c {
-               compatible = "fsl,mma8450";
-               reg = <0x1c>;
+       hdmiin: adv7611@4c {
+               compatible = "adi,adv7611";
+               reg = <0x4c>;
+       };
+
+       touchscreen: egalax_ts@04 {
+               compatible = "eeti,egalax_ts";
+               reg = <0x04>;
+               interrupt-parent = <&gpio7>;
+               interrupts = <12 2>; /* gpio7_12 active low */
+               wakeup-gpios = <&gpio7 12 0>;
        };
 
        videoout: adv7393@2a {
@@ -253,17 +347,6 @@
                compatible = "adi,adv7180";
                reg = <0x20>;
        };
-
-       hdmiin: adv7611@4c {
-               compatible = "adi,adv7611";
-               reg = <0x4c>;
-       };
-
-       touchscreen: egalax_ts@04 {
-               compatible = "eeti,egalax_ts";
-               reg = <0x04>;
-               wakeup-gpios = <&gpio1 12 0>;
-       };
 };
 
 &iomuxc {
@@ -275,20 +358,28 @@
                        fsl,pins = <
                                MX6Q_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
                                MX6Q_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
+                               MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+                               MX6Q_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
+                               MX6Q_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
+                               MX6Q_PAD_GPIO_2__GPIO1_IO02     0x80000000 /* CAN_STBY */
+                               MX6Q_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* TOUCH_IRQ# */
                                MX6Q_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
                                MX6Q_PAD_KEY_ROW0__GPIO4_IO07   0x80000000 /* user2 led */
                                MX6Q_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
                                MX6Q_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
-                               MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-                               MX6Q_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
                                MX6Q_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
-                               MX6Q_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
-                               MX6Q_PAD_GPIO_2__GPIO1_IO02     0x80000000 /* CAN_STBY */
                         >;
                };
        };
 };
 
+&ldb {
+       status = "okay";
+       lvds-channel@0 {
+               crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
+       };
+};
+
 &pcie {
        reset-gpio = <&gpio1 29 0>;
        status = "okay";
@@ -328,9 +419,9 @@
 };
 
 &uart5 {
-       status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_uart5_1>;
+       status = "okay";
 };
 
 &usbotg {
@@ -342,6 +433,7 @@
 };
 
 &usbh1 {
+       vbus-supply = <&reg_usb_h1_vbus>;
        status = "okay";
 };