#define _R819XU_HTTYPE_H_
-//------------------------------------------------------------
-// The HT Capability element is present in beacons, association request,
-// reassociation request and probe response frames
-//------------------------------------------------------------
-
-//
-// Operation mode value
-//
+/*----------------------------------------------------------------------
+ * The HT Capability element is present in beacons, association request,
+ * reassociation request and probe response frames
+ *----------------------------------------------------------------------*/
+
+/* Operation mode value */
#define HT_OPMODE_NO_PROTECT 0
#define HT_OPMODE_OPTIONAL 1
#define HT_OPMODE_40MHZ_PROTECT 2
#define HT_OPMODE_MIXED 3
-//
-// MIMO Power Save Settings
-//
+/* MIMO Power Save Settings */
#define MIMO_PS_STATIC 0
#define MIMO_PS_DYNAMIC 1
#define MIMO_PS_NOLIMIT 3
-//
-// There should be 128 bits to cover all of the MCS rates. However, since
-// 8190 does not support too much rates, one integer is quite enough.
-//
+/* There should be 128 bits to cover all of the MCS rates. However, since
+ * 8190 does not support too much rates, one integer is quite enough. */
#define sHTCLng 4
HT_MCS13 = 0x00002000,
HT_MCS14 = 0x00004000,
HT_MCS15 = 0x00008000,
- // Do not define MCS32 here although 8190 support MCS32
+ /* Do not define MCS32 here although 8190 support MCS32 */
} HT_MCS_RATE,*PHT_MCS_RATE;
-//
-// Represent Channel Width in HT Capabilities
-//
+/* Represent Channel Width in HT Capabilities */
typedef enum _HT_CHANNEL_WIDTH {
HT_CHANNEL_WIDTH_20 = 0,
HT_CHANNEL_WIDTH_20_40 = 1,
} HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
-//
-// Represent Extension Channel Offset in HT Capabilities
-// This is available only in 40Mhz mode.
-//
+/* Represent Extension Channel Offset in HT Capabilities
+ * This is available only in 40Mhz mode. */
typedef enum _HT_EXTCHNL_OFFSET {
HT_EXTCHNL_OFFSET_NO_EXT = 0,
HT_EXTCHNL_OFFSET_UPPER = 1,
} HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET;
typedef enum _CHNLOP {
- CHNLOP_NONE = 0, // No Action now
- CHNLOP_SCAN = 1, // Scan in progress
- CHNLOP_SWBW = 2, // Bandwidth switching in progress
- CHNLOP_SWCHNL = 3, // Software Channel switching in progress
+ CHNLOP_NONE = 0, /* No Action now */
+ CHNLOP_SCAN = 1, /* Scan in progress */
+ CHNLOP_SWBW = 2, /* Bandwidth switching in progress */
+ CHNLOP_SWCHNL = 3, /* Software Channel switching in progress */
} CHNLOP, *PCHNLOP;
-// Determine if the Channel Operation is in progress
+/* Determine if the Channel Operation is in progress */
#define CHHLOP_IN_PROGRESS(_pHTInfo) \
((_pHTInfo)->ChnlOp > CHNLOP_NONE) ? TRUE : FALSE
} HT_ACTION, *PHT_ACTION;
-/* 2007/06/07 MH Define sub-carrier mode for 40MHZ. */
+/* Define sub-carrier mode for 40MHZ. */
typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier {
SC_MODE_DUPLICATE = 0,
SC_MODE_LOWER = 1,
typedef struct _HT_CAPABILITY_ELE {
- //HT capability info
+ /* HT capability info */
u8 AdvCoding:1;
u8 ChlWidth:1;
u8 MimoPwrSave:2;
u8 Rsvd1:1;
u8 LSigTxopProtect:1;
- //MAC HT parameters info
+ /* MAC HT parameters info */
u8 MaxRxAMPDUFactor:2;
u8 MPDUDensity:3;
u8 Rsvd2:3;
- //Supported MCS set
+ /* Supported MCS set */
u8 MCS[16];
- //Extended HT Capability Info
+ /* Extended HT Capability Info */
u16 ExtHTCapInfo;
- //TXBF Capabilities
+ /* TXBF Capabilities */
u8 TxBFCap[4];
- //Antenna Selection Capabilities
+ /* Antenna Selection Capabilities */
u8 ASCap;
} __packed HT_CAPABILITY_ELE, *PHT_CAPABILITY_ELE;
-//------------------------------------------------------------
-// The HT Information element is present in beacons
-// Only AP is required to include this element
-//------------------------------------------------------------
+/*------------------------------------------------------------
+ * The HT Information element is present in beacons
+ * Only AP is required to include this element
+ *------------------------------------------------------------*/
typedef struct _HT_INFORMATION_ELE {
u8 ControlChl;
u8 BasicMSC[16];
} __packed HT_INFORMATION_ELE, *PHT_INFORMATION_ELE;
-//
-// MIMO Power Save control field.
-// This is appear in MIMO Power Save Action Frame
-//
+/* MIMO Power Save control field.
+ * This is appear in MIMO Power Save Action Frame */
typedef struct _MIMOPS_CTRL {
u8 MimoPsEnable:1;
u8 MimoPsMode:1;
HT_AGG_FORCE_DISABLE = 2,
} HT_AGGRE_MODE_E, *PHT_AGGRE_MODE_E;
-//------------------------------------------------------------
-// The Data structure is used to keep HT related variables when card is
-// configured as non-AP STA mode. **Note** Current_xxx should be set
-// to default value in HTInitializeHTInfo()
-//------------------------------------------------------------
+/*----------------------------------------------------------------------------
+ * The Data structure is used to keep HT related variables when card is
+ * configured as non-AP STA mode.
+ * **Note** Current_xxx should be set to default value in HTInitializeHTInfo()
+ *----------------------------------------------------------------------------*/
typedef struct _RT_HIGH_THROUGHPUT {
-// DECLARE_RT_OBJECT(_RT_HIGH_THROUGHPUT);
u8 bEnableHT;
u8 bCurrentHTSupport;
-
- u8 bRegBW40MHz; // Tx 40MHz channel capability
- u8 bCurBW40MHz; // Tx 40MHz channel capability
-
- u8 bRegShortGI40MHz; // Tx Short GI for 40Mhz
- u8 bCurShortGI40MHz; // Tx Short GI for 40MHz
-
- u8 bRegShortGI20MHz; // Tx Short GI for 20MHz
- u8 bCurShortGI20MHz; // Tx Short GI for 20MHz
-
- u8 bRegSuppCCK; // Tx CCK rate capability
- u8 bCurSuppCCK; // Tx CCK rate capability
-
- // 802.11n spec version for "peer"
+ /* Tx 40MHz channel capability */
+ u8 bRegBW40MHz;
+ u8 bCurBW40MHz;
+ /* Tx Short GI for 40Mhz */
+ u8 bRegShortGI40MHz;
+ u8 bCurShortGI40MHz;
+ /* Tx Short GI for 20MHz */
+ u8 bRegShortGI20MHz;
+ u8 bCurShortGI20MHz;
+ /* Tx CCK rate capability */
+ u8 bRegSuppCCK;
+ u8 bCurSuppCCK;
+
+ /* 802.11n spec version for "peer" */
HT_SPEC_VER ePeerHTSpecVer;
- // HT related information for "Self"
- HT_CAPABILITY_ELE SelfHTCap; // This is HT cap element sent to peer STA, which also indicate HT Rx capabilities.
- HT_INFORMATION_ELE SelfHTInfo; // This is HT info element sent to peer STA, which also indicate HT Rx capabilities.
+ /* HT related information for "Self" */
+ /* This is HT cap element sent to peer STA, which also indicate
+ * HT Rx capabilities. */
+ HT_CAPABILITY_ELE SelfHTCap;
+ HT_INFORMATION_ELE SelfHTInfo;
- // HT related information for "Peer"
+ /* HT related information for "Peer" */
u8 PeerHTCapBuf[32];
u8 PeerHTInfoBuf[32];
- // A-MSDU related
- u8 bAMSDU_Support; // This indicates Tx A-MSDU capability
- u16 nAMSDU_MaxSize; // This indicates Tx A-MSDU capability
- u8 bCurrent_AMSDU_Support; // This indicates Tx A-MSDU capability
- u16 nCurrent_AMSDU_MaxSize; // This indicates Tx A-MSDU capability
+ /* A-MSDU related */
+ /* This indicates Tx A-MSDU capability */
+ u8 bAMSDU_Support;
+ u16 nAMSDU_MaxSize;
+ u8 bCurrent_AMSDU_Support;
+ u16 nCurrent_AMSDU_MaxSize;
- // AMPDU related <2006.08.10 Emily>
- u8 bAMPDUEnable; // This indicate Tx A-MPDU capability
- u8 bCurrentAMPDUEnable; // This indicate Tx A-MPDU capability
- u8 AMPDU_Factor; // This indicate Tx A-MPDU capability
- u8 CurrentAMPDUFactor; // This indicate Tx A-MPDU capability
- u8 MPDU_Density; // This indicate Tx A-MPDU capability
- u8 CurrentMPDUDensity; // This indicate Tx A-MPDU capability
+ /* A-MPDU related */
+ /* This indicate Tx A-MPDU capability */
+ u8 bAMPDUEnable;
+ u8 bCurrentAMPDUEnable;
+ u8 AMPDU_Factor;
+ u8 CurrentAMPDUFactor;
+ u8 MPDU_Density;
+ u8 CurrentMPDUDensity;
- // Forced A-MPDU enable
+ /* Forced A-MPDU enable */
HT_AGGRE_MODE_E ForcedAMPDUMode;
u8 ForcedAMPDUFactor;
u8 ForcedMPDUDensity;
- // Forced A-MSDU enable
+ /* Forced A-MSDU enable */
HT_AGGRE_MODE_E ForcedAMSDUMode;
u16 ForcedAMSDUMaxSize;
u8 CurrentOpMode;
- // MIMO PS related
+ /* MIMO PS related */
u8 SelfMimoPs;
u8 PeerMimoPs;
- // 40MHz Channel Offset settings.
+ /* 40MHz Channel Offset settings. */
HT_EXTCHNL_OFFSET CurSTAExtChnlOffset;
- u8 bCurTxBW40MHz; // If we use 40 MHz to Tx
+ u8 bCurTxBW40MHz; /* If we use 40 MHz to Tx */
u8 PeerBandwidth;
- // For Bandwidth Switching
+ /* For Bandwidth Switching */
u8 bSwBwInProgress;
- CHNLOP ChnlOp; // software switching channel in progress. By Bruce, 2008-02-15.
+ CHNLOP ChnlOp; /* software switching channel in progress. */
u8 SwBwStep;
- //RT_TIMER SwBwTimer;
struct timer_list SwBwTimer;
- // For Realtek proprietary A-MPDU factor for aggregation
+ /* For Realtek proprietary A-MPDU factor for aggregation */
u8 bRegRT2RTAggregation;
u8 bCurrentRT2RTAggregation;
u8 bCurrentRT2RTLongSlotTime;
u8 szRT2RTAggBuffer[10];
- // Rx Reorder control
+ /* Rx Reorder control */
u8 bRegRxReorderEnable;
u8 bCurRxReorderEnable;
u8 RxReorderWinSize;
u8 UsbRxFwAggrTimeout;
#endif
- // Add for Broadcom(Linksys) IOT. Joseph
+ /* Add for Broadcom(Linksys) IOT. */
u8 bIsPeerBcm;
- // For IOT issue.
+ /* For IOT issue. */
u32 IOTAction;
} RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT;
-//------------------------------------------------------------
-// The Data structure is used to keep HT related variable for "each Sta"
-// when card is configured as "AP mode"
-//------------------------------------------------------------
+/*----------------------------------------------------------------------
+ * The Data structure is used to keep HT related variable for "each Sta"
+ * when card is configured as "AP mode"
+ *----------------------------------------------------------------------*/
typedef struct _RT_HTINFO_STA_ENTRY {
u8 bEnableHT;
-//------------------------------------------------------------
-// The Data structure is used to keep HT related variable for "each AP"
-// when card is configured as "STA mode"
-//------------------------------------------------------------
+/*---------------------------------------------------------------------
+ * The Data structure is used to keep HT related variable for "each AP"
+ * when card is configured as "STA mode"
+ *---------------------------------------------------------------------*/
typedef struct _BSS_HT {
u8 bdSupportHT;
- // HT related elements
+ /* HT related elements */
u8 bdHTCapBuf[32];
u16 bdHTCapLen;
u8 bdHTInfoBuf[32];
u16 bdHTInfoLen;
HT_SPEC_VER bdHTSpecVer;
- //HT_CAPABILITY_ELE bdHTCapEle;
- //HT_INFORMATION_ELE bdHTInfoEle;
u8 bdRT2RTAggregation;
u8 bdRT2RTLongSlotTime;
-#endif //__INC_HTTYPE_H
+#endif
projects / openwrt / staging / blogic.git / commitdiff