dt-bindings: display: msm/dsi: Add updates for SDM845

SDM845 uses a newer revision (v2.0+) of the 6G DSI controller. This
revision has another clock input at the block boundary called the byte
interface clock. Specify this new clock in the binding.

A 10nm DSI PHY is used along with the controller. Add a compatible
string for it and specify its base address/regulator supply needs.

Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index 26a1796b714512a9ac868525d3ec5ba35f0001b5..518e9cdf0d4bf17fab404b6dc85621888a08050e 100644 (file)
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -20,6 +20,8 @@ Required properties:
   * "core"
   For DSIv2, we need an additional clock:
    * "src"
+  For DSI6G v2.0 onwards, we need also need the clock:
+   * "byte_intf"
 - assigned-clocks: Parents of "byte" and "pixel" for the given platform.
 - assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
   by a DSI PHY block. See [1] for details on clock bindings.
@@ -87,6 +89,7 @@ Required properties:
   * "qcom,dsi-phy-20nm"
   * "qcom,dsi-phy-28nm-8960"
   * "qcom,dsi-phy-14nm"
+  * "qcom,dsi-phy-10nm"
 - reg: Physical base address and length of the registers of PLL, PHY. Some
   revisions require the PHY regulator base address, whereas others require the
   PHY lane base address. See below for each PHY revision.
@@ -95,7 +98,7 @@ Required properties:
   * "dsi_pll"
   * "dsi_phy"
   * "dsi_phy_regulator"
-  For DSI 14nm PHY:
+  For DSI 14nm and 10nm PHYs:
   * "dsi_pll"
   * "dsi_phy"
   * "dsi_phy_lane"
@@ -112,6 +115,8 @@ Required properties:
 - vcca-supply: phandle to vcca regulator device node
   For 14nm PHY:
 - vcca-supply: phandle to vcca regulator device node
+  For 10nm PHY:
+- vdds-supply: phandle to vdds regulator device node
 
 Optional properties:
 - qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY