Compile and runtime tested on x86/64.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
LINUX_RELEASE?=1
LINUX_VERSION-4.9 = .229
-LINUX_VERSION-4.14 = .187
+LINUX_VERSION-4.14 = .193
LINUX_KERNEL_HASH-4.9.229 = 3256c2835fd95a1a739603e78b02d363eac2ce73a39fa19b13b32da4fc370fdc
-LINUX_KERNEL_HASH-4.14.187 = 5b223475eaeea196aa7e127d3f253bca5c35d8afdc72ca75230ce1ecdd1454bd
+LINUX_KERNEL_HASH-4.14.193 = 0b0fb41d4430e1a42738b341cbfd2f41951aa5cd02acabbd53f076119c8b9f03
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
#include "xhci.h"
#include "xhci-trace.h"
-@@ -269,6 +271,458 @@ static void xhci_pme_acpi_rtd3_enable(st
+@@ -272,6 +274,458 @@ static void xhci_pme_acpi_rtd3_enable(st
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
#endif /* CONFIG_ACPI */
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
-@@ -307,6 +761,22 @@ static int xhci_pci_probe(struct pci_dev
+@@ -310,6 +764,22 @@ static int xhci_pci_probe(struct pci_dev
struct hc_driver *driver;
struct usb_hcd *hcd;
driver = (struct hc_driver *)id->driver_data;
/* For some HW implementation, a XHCI reset is just not enough... */
-@@ -368,6 +838,16 @@ static void xhci_pci_remove(struct pci_d
+@@ -371,6 +841,16 @@ static void xhci_pci_remove(struct pci_d
{
struct xhci_hcd *xhci;
* Before updating sk_refcnt, we must commit prior changes to memory
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
-@@ -1697,7 +1697,7 @@ u32 tcp_tso_autosize(const struct sock *
+@@ -1699,7 +1699,7 @@ u32 tcp_tso_autosize(const struct sock *
{
u32 bytes, segs;
sk->sk_gso_max_size - 1 - MAX_TCP_HEADER);
/* Goal is to send at least one packet per ms,
-@@ -2215,7 +2215,7 @@ static bool tcp_small_queue_check(struct
+@@ -2217,7 +2217,7 @@ static bool tcp_small_queue_check(struct
{
unsigned int limit;
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
-@@ -1987,7 +1987,8 @@ static const struct usb_device_id option
+@@ -1990,7 +1990,8 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d01, 0xff) }, /* D-Link DWM-156 (variant) */
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d02, 0xff) },
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d03, 0xff) },
/*
* Data section helpers
-@@ -496,7 +497,7 @@
+@@ -497,7 +498,7 @@
#define ENTRY_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__entry_text_start) = .; \
VMLINUX_SYMBOL(__entry_text_end) = .;
#define IRQENTRY_TEXT \
-@@ -603,7 +604,7 @@
+@@ -604,7 +605,7 @@
. = ALIGN(sbss_align); \
.sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { \
*(.dynsbss) \
#include <linux/export.h>
/* Align . to a 8 byte boundary equals to maximum function alignment. */
-@@ -341,14 +351,14 @@
+@@ -342,14 +352,14 @@
/* Kernel symbol table: Normal symbols */ \
__ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab) = .; \
VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \
} \
\
-@@ -410,7 +420,7 @@
+@@ -411,7 +421,7 @@
\
/* Kernel symbol table: strings */ \
__ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
} \
\
/* __*init sections */ \
-@@ -793,6 +803,8 @@
+@@ -796,6 +806,8 @@
EXIT_TEXT \
EXIT_DATA \
EXIT_CALL \
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
-@@ -3095,6 +3096,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+@@ -3108,6 +3109,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
/*
* Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To
-@@ -3151,6 +3153,8 @@ static void fixup_debug_report(struct pc
+@@ -3164,6 +3166,8 @@ static void fixup_debug_report(struct pc
}
}
/*
* Some BIOS implementations leave the Intel GPU interrupts enabled,
* even though no one is handling them (f.e. i915 driver is never loaded).
-@@ -3189,6 +3193,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+@@ -3202,6 +3206,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
-@@ -289,12 +289,13 @@ static bool need_bw_sch(struct usb_host_
+@@ -293,12 +293,13 @@ static bool need_bw_sch(struct usb_host_
int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk)
{
if (!xhci->shared_hcd) {
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
-@@ -280,6 +280,9 @@ static int xhci_pci_setup(struct usb_hcd
+@@ -283,6 +283,9 @@ static int xhci_pci_setup(struct usb_hcd
if (!xhci->sbrn)
pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
struct mtk_thermal;
struct thermal_bank_cfg {
-@@ -767,7 +760,7 @@ static struct platform_driver mtk_therma
+@@ -765,7 +758,7 @@ static struct platform_driver mtk_therma
.probe = mtk_thermal_probe,
.remove = mtk_thermal_remove,
.driver = {
/**
* raw_to_mcelsius - convert a raw ADC value to mcelsius
* @mt: The thermal controller
-@@ -633,6 +664,10 @@ static const struct of_device_id mtk_the
+@@ -631,6 +662,10 @@ static const struct of_device_id mtk_the
{
.compatible = "mediatek,mt2712-thermal",
.data = (void *)&mt2712_thermal_data,
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
-@@ -406,6 +406,12 @@ static int dwc2_driver_probe(struct plat
+@@ -407,6 +407,12 @@ static int dwc2_driver_probe(struct plat
if (retval)
return retval;