- interrupt-controller : tell that the PMC is an interrupt controller.
- #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
and reflect the bit position in the PMC_ER/DR/SR registers.
- You can use the dt macros defined in dt-bindings/clk/at91.h.
+ You can use the dt macros defined in dt-bindings/clock/at91.h.
0 (AT91_PMC_MOSCS) -> main oscillator ready
1 (AT91_PMC_LOCKA) -> PLL A ready
2 (AT91_PMC_LOCKB) -> PLL B ready
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91SAM9261 family SoC";
#include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel SAMA5D3 family SoC";
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
/ {
ahb {
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
/ {
aliases {
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/clock/at91.h>
/ {
aliases {
+++ /dev/null
-/*
- * This header provides constants for AT91 pmc status.
- *
- * The constants defined in this header are being used in dts.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef _DT_BINDINGS_CLK_AT91_H
-#define _DT_BINDINGS_CLK_AT91_H
-
-#define AT91_PMC_MOSCS 0 /* MOSCS Flag */
-#define AT91_PMC_LOCKA 1 /* PLLA Lock */
-#define AT91_PMC_LOCKB 2 /* PLLB Lock */
-#define AT91_PMC_MCKRDY 3 /* Master Clock */
-#define AT91_PMC_LOCKU 6 /* UPLL Lock */
-#define AT91_PMC_PCKRDY(id) (8 + (id)) /* Programmable Clock */
-#define AT91_PMC_MOSCSELS 16 /* Main Oscillator Selection */
-#define AT91_PMC_MOSCRCS 17 /* Main On-Chip RC */
-#define AT91_PMC_CFDEV 18 /* Clock Failure Detector Event */
-
-#endif
--- /dev/null
+/*
+ * This header provides constants for AT91 pmc status.
+ *
+ * The constants defined in this header are being used in dts.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef _DT_BINDINGS_CLK_AT91_H
+#define _DT_BINDINGS_CLK_AT91_H
+
+#define AT91_PMC_MOSCS 0 /* MOSCS Flag */
+#define AT91_PMC_LOCKA 1 /* PLLA Lock */
+#define AT91_PMC_LOCKB 2 /* PLLB Lock */
+#define AT91_PMC_MCKRDY 3 /* Master Clock */
+#define AT91_PMC_LOCKU 6 /* UPLL Lock */
+#define AT91_PMC_PCKRDY(id) (8 + (id)) /* Programmable Clock */
+#define AT91_PMC_MOSCSELS 16 /* Main Oscillator Selection */
+#define AT91_PMC_MOSCRCS 17 /* Main On-Chip RC */
+#define AT91_PMC_CFDEV 18 /* Clock Failure Detector Event */
+
+#endif