+++ /dev/null
-#
-# Copyright (C) 2007-2014 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=powerpc
-BOARD:=mpc83xx
-BOARDNAME:=Freescale MPC83xx
-CPU_TYPE:=603e
-FEATURES:=squashfs targz
-MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-
-KERNEL_PATCHVER:=3.8
-
-include $(INCLUDE_DIR)/target.mk
-
-DEFAULT_PACKAGES += kmod-via-velocity
-
-define Target/Description
- Build firmware images for Freescale MPC83xx based boards (eg. RouterBoard 600).
-endef
-
-KERNELNAME:=uImage dtbImage.rb600 dtbImage.rb333
-
-$(eval $(call BuildTarget))
+++ /dev/null
-define Package/base-files/install-target
- rm -f $(1)/etc/config/network
-endef
-
-
+++ /dev/null
-::sysinit:/etc/init.d/rcS S boot
-::shutdown:/etc/init.d/rcS K shutdown
-ttyS0::askfirst:/bin/ash --login
-ttyS1::askfirst:/bin/ash --login
+++ /dev/null
-#!/bin/sh
-#
-# Copyright (C) 2012 OpenWrt.org
-#
-
-[ -e /etc/config/network ] && exit 0
-
-touch /etc/config/network
-
-. /lib/functions/uci-defaults.sh
-. /lib/mpc83xx.sh
-
-ucidef_set_interface_loopback
-
-board=$(mpc83xx_board_name)
-
-case "$board" in
-rb333)
- ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2"
- ;;
-
-*)
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ;;
-esac
-
-uci commit network
-
-exit 0
+++ /dev/null
-#!/bin/sh
-#
-# Copyright (C) 2012 OpenWrt.org
-#
-
-MPC83XX_BOARD_NAME=
-MPC83XX_MODEL=
-
-mpc83xx_board_detect() {
- local model
- local name
-
- model=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /model/ {print $2}' /proc/cpuinfo)
-
- case "$model" in
- "RB333")
- name="rb333"
- model="MikroTik RouterBOARD 333"
- ;;
- "RB600")
- name="rb600"
- model="MikroTik RouterBOARD 600"
- ;;
- esac
-
- [ -z "$name" ] && name="unknown"
-
- [ -z "$MPC83XX_BOARD_NAME" ] && MPC83XX_BOARD_NAME="$name"
- [ -z "$MPC83XX_MODEL" ] && MPC83XX_MODEL="$model"
-
- [ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
-
- echo "$MPC83XX_BOARD_NAME" > /tmp/sysinfo/board_name
- echo "$MPC83XX_MODEL" > /tmp/sysinfo/model
-}
-
-mpc83xx_board_name() {
- local name
-
- [ -f /tmp/sysinfo/board_name ] && name=$(cat /tmp/sysinfo/board_name)
- [ -z "$name" ] && name="unknown"
-
- echo "$name"
-}
+++ /dev/null
-#!/bin/sh
-
-do_mpc83xx() {
- . /lib/mpc83xx.sh
-
- mpc83xx_board_detect
-}
-
-boot_hook_add preinit_main do_mpc83xx
+++ /dev/null
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-CONFIG_6xx=y
-CONFIG_8xxx_WDT=y
-# CONFIG_ADVANCED_OPTIONS is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_ARPD is not set
-# CONFIG_ASP834x is not set
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATA=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_BOOTX_TEXT is not set
-CONFIG_BOUNCE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
-CONFIG_CMDLINE_BOOL=y
-CONFIG_COMPAT_BRK=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEV_TALITOS=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_RNG2=y
-# CONFIG_CRYPTO_SHA1_PPC is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-# CONFIG_E200 is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_EPAPR_BOOT is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FIXED_PHY=y
-CONFIG_FSL_DMA=y
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_FSL_GTM=y
-CONFIG_FSL_LBC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_FSL_SOC=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_GE_FPGA is not set
-CONFIG_GIANFAR=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAS_RAPIDIO is not set
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INET_LRO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-# CONFIG_INPUT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IPIC=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-# CONFIG_ISDN is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-# CONFIG_JFFS2_LZMA is not set
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_KMETER1 is not set
-# CONFIG_LBDAF is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LIBCRC32C=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MDIO_GPIO=y
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPC512X_DMA is not set
-CONFIG_MPC830x_RDB=y
-CONFIG_MPC831x_RDB=y
-CONFIG_MPC832x_MDS=y
-CONFIG_MPC832x_RDB=y
-CONFIG_MPC834x_ITX=y
-CONFIG_MPC834x_MDS=y
-CONFIG_MPC836x_MDS=y
-CONFIG_MPC836x_RDK=y
-CONFIG_MPC837x_MDS=y
-CONFIG_MPC837x_RDB=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_U3_HT_IRQS is not set
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_MTD_BLOCK2MTD=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND_FSL_UPM=y
-CONFIG_MTD_NAND_RB_PPC=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-# CONFIG_NEED_DMA_MAP_STATE is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_EMATCH=y
-# CONFIG_NONSTATIC_KERNEL is not set
-CONFIG_NR_IRQS=512
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xc0000000
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PATA_RB_PPC=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_MSI=y
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_POWERNV_MSI=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_PPC64 is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_PPC_970_NAP is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-CONFIG_PPC_DISABLE_WERROR=y
-# CONFIG_PPC_DOORBELL is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-# CONFIG_PPC_EPAPR_HV_PIC is not set
-CONFIG_PPC_FPU=y
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_ICP_HV is not set
-# CONFIG_PPC_ICP_NATIVE is not set
-# CONFIG_PPC_ICS_RTAS is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_MPC831x=y
-CONFIG_PPC_MPC832x=y
-CONFIG_PPC_MPC834x=y
-CONFIG_PPC_MPC837x=y
-CONFIG_PPC_MSI_BITMAP=y
-CONFIG_PPC_OF=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_PPC_P7_NAP is not set
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_RTAS is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_PPC_WSP is not set
-# CONFIG_PPC_XICS is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_PTP_1588_CLOCK_GIANFAR is not set
-CONFIG_QE_GPIO=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_RB_IOMAP=y
-CONFIG_RB_PPC=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SBC834x is not set
-CONFIG_SCHED_HRTICK=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_QE=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_APBPS2 is not set
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_PCIPS2=y
-CONFIG_SERIO_RAW=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-CONFIG_SIMPLE_GPIO=y
-# CONFIG_SLAB is not set
-CONFIG_SLOB=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SWAP is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_TASK_SIZE=0xc0000000
-# CONFIG_TAU is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_UBIFS_FS is not set
-CONFIG_UCC=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC_GETH=y
-CONFIG_UCC_SLOW=y
-# CONFIG_UCC_TDM is not set
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_VIA_VELOCITY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_VITESSE_PHY_8601_SKEW=y
-CONFIG_WORD_SIZE=32
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-CONFIG_YAFFS_DISABLE_TAGS_ECC=y
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_XATTR=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-CONFIG_6xx=y
-CONFIG_8xxx_WDT=y
-# CONFIG_ADVANCED_OPTIONS is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-# CONFIG_ARCH_RANDOM is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_ASP834x is not set
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATA=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_BOOTX_TEXT is not set
-CONFIG_BOUNCE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
-CONFIG_CMDLINE_BOOL=y
-CONFIG_COMPAT_BRK=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEV_TALITOS=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_RNG2=y
-# CONFIG_CRYPTO_SHA1_PPC is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-# CONFIG_DW_DMAC_CORE is not set
-# CONFIG_DW_DMAC_PCI is not set
-# CONFIG_E200 is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_EPAPR_BOOT is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FIXED_PHY=y
-CONFIG_FSL_DMA=y
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_FSL_GTM=y
-CONFIG_FSL_LBC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_FSL_SOC=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-# CONFIG_GENERIC_CSUM is not set
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_GE_FPGA is not set
-CONFIG_GIANFAR=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAS_RAPIDIO is not set
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INET_LRO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-# CONFIG_INPUT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IPIC=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-# CONFIG_ISDN is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-# CONFIG_JFFS2_LZMA is not set
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_KMETER1 is not set
-# CONFIG_LBDAF is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LIBCRC32C=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MDIO_GPIO=y
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPC512X_DMA is not set
-CONFIG_MPC830x_RDB=y
-CONFIG_MPC831x_RDB=y
-CONFIG_MPC832x_MDS=y
-CONFIG_MPC832x_RDB=y
-CONFIG_MPC834x_ITX=y
-CONFIG_MPC834x_MDS=y
-CONFIG_MPC836x_MDS=y
-CONFIG_MPC836x_RDK=y
-CONFIG_MPC837x_MDS=y
-CONFIG_MPC837x_RDB=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_U3_HT_IRQS is not set
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_MTD_BLOCK2MTD=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND_FSL_UPM=y
-CONFIG_MTD_NAND_RB_PPC=y
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-# CONFIG_NEED_DMA_MAP_STATE is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_EMATCH=y
-# CONFIG_NONSTATIC_KERNEL is not set
-CONFIG_NR_IRQS=512
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xc0000000
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PATA_RB_PPC=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_MSI=y
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_PPC64 is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_PPC_970_NAP is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-CONFIG_PPC_DISABLE_WERROR=y
-# CONFIG_PPC_DOORBELL is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-# CONFIG_PPC_EPAPR_HV_PIC is not set
-CONFIG_PPC_FPU=y
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_ICP_HV is not set
-# CONFIG_PPC_ICP_NATIVE is not set
-# CONFIG_PPC_ICS_RTAS is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_MPC831x=y
-CONFIG_PPC_MPC832x=y
-CONFIG_PPC_MPC834x=y
-CONFIG_PPC_MPC837x=y
-CONFIG_PPC_MSI_BITMAP=y
-CONFIG_PPC_OF=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_PPC_P7_NAP is not set
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_RTAS is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_PPC_WSP is not set
-# CONFIG_PPC_XICS is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_PTP_1588_CLOCK_GIANFAR is not set
-CONFIG_QE_GPIO=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_RB_IOMAP=y
-CONFIG_RB_PPC=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SBC834x is not set
-CONFIG_SCHED_HRTICK=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_QE=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_APBPS2 is not set
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_OLPC_APSP is not set
-CONFIG_SERIO_PCIPS2=y
-CONFIG_SERIO_RAW=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-CONFIG_SIMPLE_GPIO=y
-# CONFIG_SLAB is not set
-CONFIG_SLOB=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SWAP is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_TASK_SIZE=0xc0000000
-# CONFIG_TAU is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_UBIFS_FS is not set
-CONFIG_UCC=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC_GETH=y
-CONFIG_UCC_SLOW=y
-# CONFIG_UCC_TDM is not set
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-CONFIG_VIA_VELOCITY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_VITESSE_PHY_8601_SKEW=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WORD_SIZE=32
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-CONFIG_YAFFS_DISABLE_TAGS_ECC=y
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_XATTR=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-CONFIG_6xx=y
-CONFIG_8xxx_WDT=y
-# CONFIG_ADVANCED_OPTIONS is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-# CONFIG_ARCH_RANDOM is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_ASP834x is not set
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATA=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_BOOTX_TEXT is not set
-CONFIG_BOUNCE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
-CONFIG_CMDLINE_BOOL=y
-CONFIG_COMPAT_BRK=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEV_TALITOS=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_RNG2=y
-# CONFIG_CRYPTO_SHA1_PPC is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-# CONFIG_DW_DMAC_CORE is not set
-# CONFIG_DW_DMAC_PCI is not set
-# CONFIG_E200 is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_EPAPR_BOOT is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FIXED_PHY=y
-CONFIG_FSL_DMA=y
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_FSL_GTM=y
-CONFIG_FSL_LBC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_FSL_SOC=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_LOADER_USER_HELPER=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-# CONFIG_GENERIC_CSUM is not set
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_GE_FPGA is not set
-CONFIG_GIANFAR=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAS_RAPIDIO is not set
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INET_LRO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-# CONFIG_INPUT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IPIC=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-# CONFIG_ISDN is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-# CONFIG_JFFS2_LZMA is not set
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_KMETER1 is not set
-# CONFIG_LBDAF is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LIBCRC32C=y
-CONFIG_LIBFDT=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MDIO_GPIO=y
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPC512X_DMA is not set
-CONFIG_MPC830x_RDB=y
-CONFIG_MPC831x_RDB=y
-CONFIG_MPC832x_MDS=y
-CONFIG_MPC832x_RDB=y
-CONFIG_MPC834x_ITX=y
-CONFIG_MPC834x_MDS=y
-CONFIG_MPC836x_MDS=y
-CONFIG_MPC836x_RDK=y
-CONFIG_MPC837x_MDS=y
-CONFIG_MPC837x_RDB=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_U3_HT_IRQS is not set
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_MTD_BLOCK2MTD=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND_FSL_UPM=y
-CONFIG_MTD_NAND_RB_PPC=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-# CONFIG_NEED_DMA_MAP_STATE is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_EMATCH=y
-# CONFIG_NONSTATIC_KERNEL is not set
-CONFIG_NR_IRQS=512
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xc0000000
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PATA_RB_PPC=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_MSI=y
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_PPC64 is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_PPC_970_NAP is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_COPRO_BASE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-CONFIG_PPC_DISABLE_WERROR=y
-# CONFIG_PPC_DOORBELL is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-# CONFIG_PPC_EPAPR_HV_PIC is not set
-CONFIG_PPC_FPU=y
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_ICP_HV is not set
-# CONFIG_PPC_ICP_NATIVE is not set
-# CONFIG_PPC_ICS_RTAS is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_MPC831x=y
-CONFIG_PPC_MPC832x=y
-CONFIG_PPC_MPC834x=y
-CONFIG_PPC_MPC837x=y
-CONFIG_PPC_MSI_BITMAP=y
-CONFIG_PPC_OF=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_PPC_P7_NAP is not set
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_RTAS is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_PPC_XICS is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_PTP_1588_CLOCK_GIANFAR is not set
-CONFIG_QE_GPIO=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_RB_IOMAP=y
-CONFIG_RB_PPC=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SBC834x is not set
-CONFIG_SCHED_HRTICK=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_QE=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_APBPS2 is not set
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_PCIPS2=y
-CONFIG_SERIO_RAW=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-CONFIG_SIMPLE_GPIO=y
-# CONFIG_SLAB is not set
-CONFIG_SLOB=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SWAP is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_TASK_SIZE=0xc0000000
-# CONFIG_TAU is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_UBIFS_FS is not set
-CONFIG_UCC=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC_GETH=y
-CONFIG_UCC_SLOW=y
-# CONFIG_UCC_TDM is not set
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-CONFIG_VIA_VELOCITY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_VITESSE_PHY_8601_SKEW=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WORD_SIZE=32
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-CONFIG_YAFFS_DISABLE_TAGS_ECC=y
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_XATTR=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-CONFIG_6xx=y
-CONFIG_8xxx_WDT=y
-# CONFIG_ADVANCED_OPTIONS is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_ARPD is not set
-# CONFIG_ASP834x is not set
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATA=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_BOOTX_TEXT is not set
-CONFIG_BOUNCE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2"
-CONFIG_CMDLINE_BOOL=y
-CONFIG_COMPAT_BRK=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEV_TALITOS=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DTC=y
-# CONFIG_DW_DMAC is not set
-# CONFIG_E200 is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_EPAPR_BOOT is not set
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FIXED_PHY=y
-CONFIG_FSL_DMA=y
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_FSL_GTM=y
-CONFIG_FSL_LBC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_FSL_SOC=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ACL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_GE_FPGA is not set
-CONFIG_GIANFAR=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAS_RAPIDIO is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_INET_LRO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-# CONFIG_INPUT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IPIC=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IP_ROUTE_CLASSID=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_ISA_DMA_API=y
-# CONFIG_ISDN is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-# CONFIG_JFFS2_LZMA is not set
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_KMETER1 is not set
-# CONFIG_LBDAF is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LIBCRC32C=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MDIO_GPIO=y
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPC512X_DMA is not set
-CONFIG_MPC830x_RDB=y
-CONFIG_MPC831x_RDB=y
-CONFIG_MPC832x_MDS=y
-CONFIG_MPC832x_RDB=y
-CONFIG_MPC834x_ITX=y
-CONFIG_MPC834x_MDS=y
-CONFIG_MPC836x_MDS=y
-CONFIG_MPC836x_RDK=y
-CONFIG_MPC837x_MDS=y
-CONFIG_MPC837x_RDB=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_U3_HT_IRQS is not set
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_MTD_BLOCK2MTD=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-# CONFIG_MTD_NAND_FSL_IFC is not set
-CONFIG_MTD_NAND_FSL_UPM=y
-CONFIG_MTD_NAND_RB_PPC=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-# CONFIG_NEED_DMA_MAP_STATE is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NET_DMA is not set
-CONFIG_NET_EMATCH=y
-# CONFIG_NONSTATIC_KERNEL is not set
-CONFIG_NR_IRQS=512
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xc0000000
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PATA_RB_PPC=y
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_MSI=y
-CONFIG_PERCPU_RWSEM=y
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_PPC64 is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_PPC_970_NAP is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_CHRP is not set
-CONFIG_PPC_CLOCK=y
-# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-CONFIG_PPC_DISABLE_WERROR=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-# CONFIG_PPC_EPAPR_HV_PIC is not set
-CONFIG_PPC_FPU=y
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_ICP_HV is not set
-# CONFIG_PPC_ICP_NATIVE is not set
-# CONFIG_PPC_ICS_RTAS is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_MPC831x=y
-CONFIG_PPC_MPC832x=y
-CONFIG_PPC_MPC834x=y
-CONFIG_PPC_MPC837x=y
-CONFIG_PPC_MSI_BITMAP=y
-CONFIG_PPC_OF=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_PPC_P7_NAP is not set
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_RTAS is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_PPC_WSP is not set
-# CONFIG_PPC_XICS is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_PTP_1588_CLOCK_GIANFAR is not set
-CONFIG_QE_GPIO=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_RB_IOMAP=y
-CONFIG_RB_PPC=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SBC834x is not set
-CONFIG_SCHED_HRTICK=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SCTP_COOKIE_HMAC_MD5=y
-# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
-# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
-# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_QE=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_PCIPS2=y
-CONFIG_SERIO_RAW=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-CONFIG_SIMPLE_GPIO=y
-# CONFIG_SLAB is not set
-CONFIG_SLOB=y
-CONFIG_SOCK_DIAG=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SWAP is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_TASK_SIZE=0xc0000000
-# CONFIG_TAU is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_UBIFS_FS is not set
-CONFIG_UCC=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC_GETH=y
-CONFIG_UCC_SLOW=y
-# CONFIG_UCC_TDM is not set
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_VIA_VELOCITY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_VITESSE_PHY_8601_SKEW=y
-CONFIG_WORD_SIZE=32
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_YAFFS_9BYTE_TAGS=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-CONFIG_YAFFS_DISABLE_TAGS_ECC=y
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_XATTR=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
+++ /dev/null
-#!/bin/bash
-#
-# Licensed under the terms of the GNU GPL License version 2 or later.
-#
-# Author: Peter Tyser <ptyser@xes-inc.com>
-#
-# U-Boot firmware supports the booting of images in the Flattened Image
-# Tree (FIT) format. The FIT format uses a device tree structure to
-# describe a kernel image, device tree blob, ramdisk, etc. This script
-# creates an Image Tree Source (.its file) which can be passed to the
-# 'mkimage' utility to generate an Image Tree Blob (.itb file). The .itb
-# file can then be booted by U-Boot (or other bootloaders which support
-# FIT images). See doc/uImage.FIT/howto.txt in U-Boot source code for
-# additional information on FIT images.
-#
-
-usage() {
- echo "Usage: `basename $0` -A arch -C comp -a addr -e entry" \
- "-v version -k kernel [-d dtb] -o its_file"
- echo -e "\t-A ==> set architecture to 'arch'"
- echo -e "\t-C ==> set compression type 'comp'"
- echo -e "\t-a ==> set load address to 'addr' (hex)"
- echo -e "\t-e ==> set entry point to 'entry' (hex)"
- echo -e "\t-v ==> set kernel version to 'version'"
- echo -e "\t-k ==> include kernel image 'kernel'"
- echo -e "\t-d ==> include Device Tree Blob 'dtb'"
- echo -e "\t-o ==> create output file 'its_file'"
- exit 1
-}
-
-while getopts ":A:C:a:d:e:k:o:v:" OPTION
-do
- case $OPTION in
- A ) ARCH=$OPTARG;;
- C ) COMPRESS=$OPTARG;;
- a ) LOAD_ADDR=$OPTARG;;
- d ) DTB=$OPTARG;;
- e ) ENTRY_ADDR=$OPTARG;;
- k ) KERNEL=$OPTARG;;
- o ) OUTPUT=$OPTARG;;
- v ) VERSION=$OPTARG;;
- * ) echo "Invalid option passed to '$0' (options:$@)"
- usage;;
- esac
-done
-
-# Make sure user entered all required parameters
-if [ -z "${ARCH}" ] || [ -z "${COMPRESS}" ] || [ -z "${LOAD_ADDR}" ] || \
- [ -z "${ENTRY_ADDR}" ] || [ -z "${VERSION}" ] || [ -z "${KERNEL}" ] || \
- [ -z "${OUTPUT}" ]; then
- usage
-fi
-
-# Create a default, fully populated DTS file
-DATA="/dts-v1/;
-
-/ {
- description = \"Linux kernel ${VERSION}\";
- #address-cells = <1>;
-
- images {
- kernel@1 {
- description = \"Linux Kernel ${VERSION}\";
- data = /incbin/(\"${KERNEL}\");
- type = \"kernel\";
- arch = \"${ARCH}\";
- os = \"linux\";
- compression = \"${COMPRESS}\";
- load = <${LOAD_ADDR}>;
- entry = <${ENTRY_ADDR}>;
- hash@1 {
- algo = \"crc32\";
- };
- hash@2 {
- algo = \"sha1\";
- };
- };
-
- fdt@1 { /* start fdt */
- description = \"Flattened Device Tree blob\";
- data = /incbin/(\"${DTB}\");
- type = \"flat_dt\";
- arch = \"${ARCH}\";
- compression = \"none\";
- hash@1 {
- algo = \"crc32\";
- };
- hash@2 {
- algo = \"sha1\";
- };
- }; /* end fdt */
- };
-
- configurations {
- default = \"config@1\";
- config@1 {
- description = \"Default Linux kernel\";
- kernel = \"kernel@1\";
- fdt = \"fdt@1\";
- };
- };
-};"
-
-# Conditionally strip fdt information out of tree
-if [ -z "${DTB}" ]; then
- DATA=`echo "$DATA" | sed '/start fdt/,/end fdt/d'`
- DATA=`echo "$DATA" | sed '/fdt/d'`
-fi
-
-# Write .its file to disk
-echo "$DATA" > ${OUTPUT}
+++ /dev/null
-#
-# Copyright (C) 2009-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-
-define Image/Prepare
- $(LINUX_DIR)/scripts/dtc/dtc -O dtb -R 4 -S 0x20000 $(DTS_DIR)/mpc8377_wlan.dts > $(BIN_DIR)/openwrt-mpc83xx-mpc8377_wlan.dtb
-endef
-
-define Image/BuildKernel
- cp $(LINUX_DIR)/arch/powerpc/boot/dtbImage.rb600.elf $(BIN_DIR)/openwrt-$(BOARD)-rb600.elf
- cp $(LINUX_DIR)/arch/powerpc/boot/dtbImage.rb333.elf $(BIN_DIR)/openwrt-$(BOARD)-rb333.elf
- cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-uImage
-endef
-
-define Image/Build
- $(call Image/Build/$(1),$(1))
-endef
-
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
- ( \
- dd if=$(LINUX_DIR)/arch/powerpc/boot/uImage bs=3072k conv=sync; \
- dd if=$(KDIR)/root.$(1) bs=256k conv=sync; \
- ) > $(BIN_DIR)/$(IMG_PREFIX)-mpc8377_wlan-$(1).img
-endef
-
-$(eval $(call BuildImage))
+++ /dev/null
-#
-# Copyright (C) 2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define KernelPackage/ata-rbppc-cf
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=RB600 Compact Flash support
- DEPENDS:=@TARGET_mpc83xx
- KCONFIG:= \
- CONFIG_PATA_PLATFORM \
- CONFIG_PATA_RB_PPC
- FILES:=\
- $(LINUX_DIR)/drivers/ata/pata_rbppc_cf.ko
- AUTOLOAD:=$(call AutoLoad,41,pata_rbppc_cf,1)
- $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-rbppc-cf/description
- RB600 Compact Flash support.
-endef
-
-$(eval $(call KernelPackage,ata-rbppc-cf))
+++ /dev/null
---- a/arch/powerpc/Makefile
-+++ b/arch/powerpc/Makefile
-@@ -177,7 +177,9 @@ all: zImage
-
- # With make 3.82 we cannot mix normal and wildcard targets
- BOOT_TARGETS1 := zImage zImage.initrd uImage
--BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.%
-+BOOT_TARGETS2 := uImage.fit.% zImage% dtbImage% treeImage.% cuImage.% \
-+ simpleImage.% uImage.%
-+
-
- PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
-
-@@ -210,6 +212,7 @@ define archhelp
- @echo '* zImage - Build default images selected by kernel config'
- @echo ' zImage.* - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
- @echo ' uImage - U-Boot native image format'
-+ @echo ' uImage.fit.<dt> - U-Boot Flattened Image Tree image format'
- @echo ' cuImage.<dt> - Backwards compatible U-Boot image for older'
- @echo ' versions which do not support device trees'
- @echo ' dtbImage.<dt> - zImage with an embedded device tree blob'
---- a/arch/powerpc/boot/.gitignore
-+++ b/arch/powerpc/boot/.gitignore
-@@ -14,6 +14,7 @@ kernel-vmlinux.strip.c
- kernel-vmlinux.strip.gz
- mktree
- uImage
-+uImage.fit.*
- cuImage.*
- dtbImage.*
- treeImage.*
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -338,6 +338,9 @@ $(obj)/uImage.initrd.%: vmlinux $(obj)/%
- $(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
- $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
-
-+$(obj)/uImage.fit.%: vmlinux $(obj)/%.dtb $(wrapperbits)
-+ $(call if_changed,wrap,uboot.fit,,$(obj)/$*.dtb)
-+
- $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
- $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
-
-@@ -375,6 +378,7 @@ install: $(CONFIGURE) $(addprefix $(obj)
-
- # anything not in $(targets)
- clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
-+ uImage.* \
- zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
- zImage.miboot zImage.pmac zImage.pseries \
- zImage.maple simpleImage.* otheros.bld *.dtb
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -47,6 +47,9 @@ CROSS=
- # mkimage wrapper script
- MKIMAGE=$srctree/scripts/mkuboot.sh
-
-+# script to generate an .its file for uImage.fit.* images
-+MKITS=$srctree/scripts/mkits.sh
-+
- # directory for object and other files used by this script
- object=arch/powerpc/boot
- objbin=$object
-@@ -336,6 +339,21 @@ uboot-obs600)
- if [ -z "$cacheit" ]; then
- rm -f "$vmz"
- fi
-+ exit 0
-+ ;;
-+uboot.fit)
-+ rm -f "$ofile"
-+ ${MKITS} -A ppc -C gzip -a $membase -e $membase -v $version \
-+ -d "$srctree/$dtb" -k "$srctree/$vmz" -o "$object/uImage.its"
-+
-+ # mkimage calls dtc for FIT images so use kernel dtc if necessary
-+ export PATH=$PATH:$srctree/scripts/dtc
-+
-+ ${MKIMAGE} -f "$object/uImage.its" "$ofile"
-+ rm "$object/uImage.its"
-+ if [ -z "$cacheit" ]; then
-+ rm -f "$vmz"
-+ fi
- exit 0
- ;;
- esac
+++ /dev/null
---- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
-+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
-@@ -462,4 +462,18 @@
- 0 0x00800000>;
- };
- };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ diag {
-+ gpios = <&gpio1 9 1>;
-+ default-state = "off";
-+ };
-+
-+ wireless {
-+ gpios = <&gpio1 10 1>;
-+ default-state = "off";
-+ };
-+ };
- };
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -68,6 +68,12 @@ config VITESSE_PHY
- ---help---
- Currently supports the vsc8244
-
-+config VITESSE_PHY_8601_SKEW
-+ bool "Enable skew timing to vsc8601"
-+ depends on VITESSE_PHY
-+ ---help---
-+ Apply clock timing adjustments for vsc8601
-+
- config SMSC_PHY
- tristate "Drivers for SMSC PHYs"
- ---help---
---- a/drivers/net/phy/vitesse.c
-+++ b/drivers/net/phy/vitesse.c
-@@ -26,6 +26,11 @@
- #define MII_VSC8244_EXTCON1_TX_SKEW 0x0800
- #define MII_VSC8244_EXTCON1_RX_SKEW 0x0200
-
-+/* EXT_CON1 Register values for VSC8601 */
-+#define MII_VSC8601_EXTCON1_INIT 0x0000
-+#define MII_VSC8601_EXTCON1_SKEW 0x0100
-+#define MII_VSC8601_EXTCON1_ACTIPHY 0x0020
-+
- /* Vitesse Interrupt Mask Register */
- #define MII_VSC8244_IMASK 0x19
- #define MII_VSC8244_IMASK_IEN 0x8000
-@@ -56,6 +61,7 @@
-
- #define PHY_ID_VSC8244 0x000fc6c0
- #define PHY_ID_VSC8221 0x000fc550
-+#define PHY_ID_VSC8601 0x00070420
-
- MODULE_DESCRIPTION("Vitesse PHY driver");
- MODULE_AUTHOR("Kriston Carson");
-@@ -97,10 +103,34 @@ static int vsc824x_config_init(struct ph
- return err;
- }
-
-+static int vsc8601_config_init(struct phy_device *phydev)
-+{
-+ int err;
-+ int extcon;
-+
-+ err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
-+ MII_VSC8244_AUXCONSTAT_INIT);
-+
-+ if (err < 0)
-+ return err;
-+
-+#ifdef CONFIG_VITESSE_PHY_8601_SKEW
-+ extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
-+ if (err < 0)
-+ return err;
-+
-+ extcon |= MII_VSC8601_EXTCON1_SKEW;
-+
-+ err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
-+#endif
-+
-+ return err;
-+}
-+
- static int vsc824x_ack_interrupt(struct phy_device *phydev)
- {
- int err = 0;
--
-+
- /*
- * Don't bother to ACK the interrupts if interrupts
- * are disabled. The 824x cannot clear the interrupts
-@@ -176,6 +206,19 @@ static struct phy_driver vsc82xx_driver[
- .ack_interrupt = &vsc824x_ack_interrupt,
- .config_intr = &vsc82xx_config_intr,
- .driver = { .owner = THIS_MODULE,},
-+}, {
-+ /* Vitesse 8601 */
-+ .phy_id = PHY_ID_VSC8601,
-+ .name = "Vitesse VSC8601",
-+ .phy_id_mask = 0x000ffff8,
-+ .features = PHY_GBIT_FEATURES,
-+ .flags = PHY_HAS_INTERRUPT,
-+ .config_init = &vsc8601_config_init,
-+ .config_aneg = &genphy_config_aneg,
-+ .read_status = &genphy_read_status,
-+ .ack_interrupt = &vsc824x_ack_interrupt,
-+ .config_intr = &vsc82xx_config_intr,
-+ .driver = { .owner = THIS_MODULE,},
- } };
-
- static int __init vsc82xx_init(void)
+++ /dev/null
---- a/drivers/net/ethernet/freescale/gianfar.c
-+++ b/drivers/net/ethernet/freescale/gianfar.c
-@@ -1016,7 +1016,16 @@ static int gfar_probe(struct platform_de
- /* We need to delay at least 3 TX clocks */
- udelay(2);
-
-- tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
-+ if ((mfspr(SPRN_SVR) & 0xffff) >= 0x0011) {
-+ tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
-+ } else {
-+ /*
-+ * Do not enable flow control on chips earlier than rev 1.1,
-+ * because of the eTSEC27 erratum
-+ */
-+ tempval = 0;
-+ }
-+
- gfar_write(®s->maccfg1, tempval);
-
- /* Initialize MACCFG2. */
+++ /dev/null
---- /dev/null
-+++ b/drivers/misc/ucc_tdm.h
-@@ -0,0 +1,221 @@
-+/*
-+ * drivers/misc/ucc_tdm.h
-+ *
-+ * UCC Based Linux TDM Driver
-+ * This driver is designed to support UCC based TDM for PowerPC processors.
-+ * This driver can interface with SLIC device to run VOIP kind of
-+ * applications.
-+ *
-+ * Author: Ashish Kalra & Poonam Aggrwal
-+ *
-+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef TDM_H
-+#define TDM_H
-+
-+#define NUM_TS 8
-+#define ACTIVE_CH 8
-+
-+/* SAMPLE_DEPTH is the sample depth is the number of frames before
-+ * an interrupt. Must be a multiple of 4
-+ */
-+#define SAMPLE_DEPTH 80
-+
-+/* define the number of Rx interrupts to go by for initial stuttering */
-+#define STUTTER_INT_CNT 1
-+
-+/* BMRx Field Descriptions to specify tstate and rstate in UCC parameter RAM*/
-+#define EN_BUS_SNOOPING 0x20
-+#define BE_BO 0x10
-+
-+/* UPSMR Register for Transparent UCC controller Bit definitions*/
-+#define NBO 0x00000000 /* Normal Mode 1 bit of data per clock */
-+
-+/* SI Mode register bit definitions */
-+#define NORMAL_OPERATION 0x0000
-+#define AUTO_ECHO 0x0400
-+#define INTERNAL_LB 0x0800
-+#define CONTROL_LB 0x0c00
-+#define SIMODE_CRT (0x8000 >> 9)
-+#define SIMODE_SL (0x8000 >> 10)
-+#define SIMODE_CE (0x8000 >> 11)
-+#define SIMODE_FE (0x8000 >> 12)
-+#define SIMODE_GM (0x8000 >> 13)
-+#define SIMODE_TFSD(val) (val)
-+#define SIMODE_RFSD(val) ((val) << 8)
-+
-+#define SI_TDM_MODE_REGISTER_OFFSET 0
-+
-+#define R_CM 0x02000000
-+#define T_CM 0x02000000
-+
-+#define SET_RX_SI_RAM(n, val) \
-+ out_be16((u16 *)&qe_immr->sir.rx[(n)*2], (u16)(val))
-+
-+#define SET_TX_SI_RAM(n, val) \
-+ out_be16((u16 *)&qe_immr->sir.tx[(n)*2], (u16)(val))
-+
-+/* SI RAM entries */
-+#define SIR_LAST 0x0001
-+#define SIR_CNT(n) ((n) << 2)
-+#define SIR_BYTE 0x0002
-+#define SIR_BIT 0x0000
-+#define SIR_IDLE 0
-+#define SIR_UCC(uccx) (((uccx+9)) << 5)
-+
-+/* BRGC Register Bit definitions */
-+#define BRGC_RESET (0x1<<17)
-+#define BRGC_EN (0x1<<16)
-+#define BRGC_EXTC_QE (0x00<<14)
-+#define BRGC_EXTC_CLK3 (0x01<<14)
-+#define BRGC_EXTC_CLK5 (0x01<<15)
-+#define BRGC_EXTC_CLK9 (0x01<<14)
-+#define BRGC_EXTC_CLK11 (0x01<<14)
-+#define BRGC_EXTC_CLK13 (0x01<<14)
-+#define BRGC_EXTC_CLK15 (0x01<<15)
-+#define BRGC_ATB (0x1<<13)
-+#define BRGC_DIV16 (0x1)
-+
-+/* structure representing UCC transparent parameter RAM */
-+struct ucc_transparent_pram {
-+ __be16 riptr;
-+ __be16 tiptr;
-+ __be16 res0;
-+ __be16 mrblr;
-+ __be32 rstate;
-+ __be32 rbase;
-+ __be16 rbdstat;
-+ __be16 rbdlen;
-+ __be32 rdptr;
-+ __be32 tstate;
-+ __be32 tbase;
-+ __be16 tbdstat;
-+ __be16 tbdlen;
-+ __be32 tdptr;
-+ __be32 rbptr;
-+ __be32 tbptr;
-+ __be32 rcrc;
-+ __be32 res1;
-+ __be32 tcrc;
-+ __be32 res2;
-+ __be32 res3;
-+ __be32 c_mask;
-+ __be32 c_pres;
-+ __be16 disfc;
-+ __be16 crcec;
-+ __be32 res4[4];
-+ __be16 ts_tmp;
-+ __be16 tmp_mb;
-+};
-+
-+#define UCC_TRANSPARENT_PRAM_SIZE 0x100
-+
-+struct tdm_cfg {
-+ u8 com_pin; /* Common receive and transmit pins
-+ * 0 = separate pins
-+ * 1 = common pins
-+ */
-+
-+ u8 fr_sync_level; /* SLx bit Frame Sync Polarity
-+ * 0 = L1R/TSYNC active logic "1"
-+ * 1 = L1R/TSYNC active logic "0"
-+ */
-+
-+ u8 clk_edge; /* CEx bit Tx Rx Clock Edge
-+ * 0 = TX data on rising edge of clock
-+ * RX data on falling edge
-+ * 1 = TX data on falling edge of clock
-+ * RX data on rising edge
-+ */
-+
-+ u8 fr_sync_edge; /* FEx bit Frame sync edge
-+ * Determine when the sync pulses are sampled
-+ * 0 = Falling edge
-+ * 1 = Rising edge
-+ */
-+
-+ u8 rx_fr_sync_delay; /* TFSDx/RFSDx bits Frame Sync Delay
-+ * 00 = no bit delay
-+ * 01 = 1 bit delay
-+ * 10 = 2 bit delay
-+ * 11 = 3 bit delay
-+ */
-+
-+ u8 tx_fr_sync_delay; /* TFSDx/RFSDx bits Frame Sync Delay
-+ * 00 = no bit delay
-+ * 01 = 1 bit delay
-+ * 10 = 2 bit delay
-+ * 11 = 3 bit delay
-+ */
-+
-+ u8 active_num_ts; /* Number of active time slots in TDM
-+ * assume same active Rx/Tx time slots
-+ */
-+};
-+
-+struct ucc_tdm_info {
-+ struct ucc_fast_info uf_info;
-+ u32 ucc_busy;
-+};
-+
-+struct tdm_ctrl {
-+ u32 device_busy;
-+ struct device *device;
-+ struct ucc_fast_private *uf_private;
-+ struct ucc_tdm_info *ut_info;
-+ u32 tdm_port; /* port for this tdm:TDMA,TDMB,TDMC,TDMD */
-+ u32 si; /* serial interface: 0 or 1 */
-+ struct ucc_fast __iomem *uf_regs; /* UCC Fast registers */
-+ u16 rx_mask[8]; /* Active Receive channels LSB is ch0 */
-+ u16 tx_mask[8]; /* Active Transmit channels LSB is ch0 */
-+ /* Only channels less than the number of FRAME_SIZE are implemented */
-+ struct tdm_cfg cfg_ctrl; /* Signaling controls configuration */
-+ u8 *tdm_input_data; /* buffer used for Rx by the tdm */
-+ u8 *tdm_output_data; /* buffer used for Tx by the tdm */
-+
-+ dma_addr_t dma_input_addr; /* dma mapped buffer for TDM Rx */
-+ dma_addr_t dma_output_addr; /* dma mapped buffer for TDM Tx */
-+ u16 physical_num_ts; /* physical number of timeslots in the tdm
-+ frame */
-+ u32 phase_rx; /* cycles through 0, 1, 2 */
-+ u32 phase_tx; /* cycles through 0, 1, 2 */
-+ /*
-+ * the following two variables are for dealing with "stutter" problem
-+ * "stutter" period is about 20 frames or so, varies depending active
-+ * channel num depending on the sample depth, the code should let a
-+ * few Rx interrupts go by
-+ */
-+ u32 tdm_icnt;
-+ u32 tdm_flag;
-+ struct ucc_transparent_pram __iomem *ucc_pram;
-+ struct qe_bd __iomem *tx_bd;
-+ struct qe_bd __iomem *rx_bd;
-+ u32 ucc_pram_offset;
-+ u32 tx_bd_offset;
-+ u32 rx_bd_offset;
-+ u32 rx_ucode_buf_offset;
-+ u32 tx_ucode_buf_offset;
-+ bool leg_slic;
-+ wait_queue_head_t wakeup_event;
-+};
-+
-+struct tdm_client {
-+ u32 client_id;
-+ void (*tdm_read)(u32 client_id, short chn_id,
-+ short *pcm_buffer, short len);
-+ void (*tdm_write)(u32 client_id, short chn_id,
-+ short *pcm_buffer, short len);
-+ wait_queue_head_t *wakeup_event;
-+ };
-+
-+#define MAX_PHASE 1
-+#define NR_BUFS 2
-+#define EFF_ACTIVE_CH ACTIVE_CH / 2
-+
-+#endif
---- /dev/null
-+++ b/drivers/misc/ucc_tdm.c
-@@ -0,0 +1,1017 @@
-+/*
-+ * drivers/misc/ucc_tdm.c
-+ *
-+ * UCC Based Linux TDM Driver
-+ * This driver is designed to support UCC based TDM for PowerPC processors.
-+ * This driver can interface with SLIC device to run VOIP kind of
-+ * applications.
-+ *
-+ * Author: Ashish Kalra & Poonam Aggrwal
-+ *
-+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+#include <linux/time.h>
-+#include <linux/skbuff.h>
-+#include <linux/proc_fs.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/string.h>
-+#include <linux/irq.h>
-+#include <linux/of_platform.h>
-+#include <linux/io.h>
-+#include <linux/wait.h>
-+#include <linux/timer.h>
-+
-+#include <asm/immap_qe.h>
-+#include <asm/qe.h>
-+#include <asm/ucc.h>
-+#include <asm/ucc_fast.h>
-+#include <asm/ucc_slow.h>
-+
-+#include "ucc_tdm.h"
-+#define DRV_DESC "Freescale QE UCC TDM Driver"
-+#define DRV_NAME "ucc_tdm"
-+
-+
-+/*
-+ * define the following #define if snooping or hardware-based cache coherency
-+ * is disabled on the UCC transparent controller.This flag enables
-+ * software-based cache-coherency support by explicitly flushing data cache
-+ * contents after setting up the TDM output buffer(s) and invalidating the
-+ * data cache contents before the TDM input buffer(s) are read.
-+ */
-+#undef UCC_CACHE_SNOOPING_DISABLED
-+
-+#define MAX_NUM_TDM_DEVICES 8
-+
-+static struct tdm_ctrl *tdm_ctrl[MAX_NUM_TDM_DEVICES];
-+
-+static int num_tdm_devices;
-+static int num_tdm_clients;
-+
-+static struct ucc_tdm_info utdm_primary_info = {
-+ .uf_info = {
-+ .tsa = 1,
-+ .cdp = 1,
-+ .cds = 1,
-+ .ctsp = 1,
-+ .ctss = 1,
-+ .revd = 1,
-+ .urfs = 0x128,
-+ .utfs = 0x128,
-+ .utfet = 0,
-+ .utftt = 0x128,
-+ .ufpt = 256,
-+ .ttx_trx = UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT,
-+ .tenc = UCC_FAST_TX_ENCODING_NRZ,
-+ .renc = UCC_FAST_RX_ENCODING_NRZ,
-+ .tcrc = UCC_FAST_16_BIT_CRC,
-+ .synl = UCC_FAST_SYNC_LEN_NOT_USED,
-+ },
-+ .ucc_busy = 0,
-+};
-+
-+static struct ucc_tdm_info utdm_info[8];
-+
-+static void dump_siram(struct tdm_ctrl *tdm_c)
-+{
-+#ifdef DEBUG
-+ int i;
-+ u16 phy_num_ts;
-+
-+ phy_num_ts = tdm_c->physical_num_ts;
-+
-+ pr_debug("SI TxRAM dump\n");
-+ /* each slot entry in SI RAM is of 2 bytes */
-+ for (i = 0; i < phy_num_ts * 2; i++)
-+ pr_debug("%x ", in_8(&qe_immr->sir.tx[i]));
-+ pr_debug("\nSI RxRAM dump\n");
-+ for (i = 0; i < phy_num_ts * 2; i++)
-+ pr_debug("%x ", in_8(&qe_immr->sir.rx[i]));
-+ pr_debug("\n");
-+#endif
-+}
-+
-+static void dump_ucc(struct tdm_ctrl *tdm_c)
-+{
-+#ifdef DEBUG
-+ struct ucc_transparent_pram *ucc_pram;
-+
-+ ucc_pram = tdm_c->ucc_pram;
-+
-+ pr_debug("%s Dumping UCC Registers\n", __FUNCTION__);
-+ ucc_fast_dump_regs(tdm_c->uf_private);
-+ pr_debug("%s Dumping UCC Parameter RAM\n", __FUNCTION__);
-+ pr_debug("rbase = 0x%x\n", in_be32(&ucc_pram->rbase));
-+ pr_debug("rbptr = 0x%x\n", in_be32(&ucc_pram->rbptr));
-+ pr_debug("mrblr = 0x%x\n", in_be16(&ucc_pram->mrblr));
-+ pr_debug("rbdlen = 0x%x\n", in_be16(&ucc_pram->rbdlen));
-+ pr_debug("rbdstat = 0x%x\n", in_be16(&ucc_pram->rbdstat));
-+ pr_debug("rstate = 0x%x\n", in_be32(&ucc_pram->rstate));
-+ pr_debug("rdptr = 0x%x\n", in_be32(&ucc_pram->rdptr));
-+ pr_debug("tbase = 0x%x\n", in_be32(&ucc_pram->tbase));
-+ pr_debug("tbptr = 0x%x\n", in_be32(&ucc_pram->tbptr));
-+ pr_debug("tbdlen = 0x%x\n", in_be16(&ucc_pram->tbdlen));
-+ pr_debug("tbdstat = 0x%x\n", in_be16(&ucc_pram->tbdstat));
-+ pr_debug("tstate = 0x%x\n", in_be32(&ucc_pram->tstate));
-+ pr_debug("tdptr = 0x%x\n", in_be32(&ucc_pram->tdptr));
-+#endif
-+}
-+
-+/*
-+ * For use when a framing bit is not present
-+ * Program current-route SI ram
-+ * Set SIxRAM TDMx
-+ * Entries must be in units of 8.
-+ * SIR_UCC -> Channel Select
-+ * SIR_CNT -> Number of bits or bytes
-+ * SIR_BYTE -> Byte or Bit resolution
-+ * SIR_LAST -> Indicates last entry in SIxRAM
-+ * SIR_IDLE -> The Tx data pin is Tri-stated and the Rx data pin is
-+ * ignored
-+ */
-+static void set_siram(struct tdm_ctrl *tdm_c, enum comm_dir dir)
-+{
-+ const u16 *mask;
-+ u16 temp_mask = 1;
-+ u16 siram_code = 0;
-+ u32 i, j, k;
-+ u32 ucc;
-+ u32 phy_num_ts;
-+
-+ phy_num_ts = tdm_c->physical_num_ts;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+
-+ if (dir == COMM_DIR_RX)
-+ mask = tdm_c->rx_mask;
-+ else
-+ mask = tdm_c->tx_mask;
-+ k = 0;
-+ j = 0;
-+ for (i = 0; i < phy_num_ts; i++) {
-+ if ((mask[k] & temp_mask) == temp_mask)
-+ siram_code = SIR_UCC(ucc) | SIR_CNT(0) | SIR_BYTE;
-+ else
-+ siram_code = SIR_IDLE | SIR_CNT(0) | SIR_BYTE;
-+ if (dir == COMM_DIR_RX)
-+ out_be16((u16 *)&qe_immr->sir.rx[i * 2], siram_code);
-+ else
-+ out_be16((u16 *)&qe_immr->sir.tx[i * 2], siram_code);
-+ temp_mask = temp_mask << 1;
-+ j++;
-+ if (j >= 16) {
-+ j = 0;
-+ temp_mask = 0x0001;
-+ k++;
-+ }
-+ }
-+ siram_code = siram_code | SIR_LAST;
-+
-+ if (dir == COMM_DIR_RX)
-+ out_be16((u16 *)&qe_immr->sir.rx[(phy_num_ts - 1) * 2],
-+ siram_code);
-+ else
-+ out_be16((u16 *)&qe_immr->sir.tx[(phy_num_ts - 1) * 2],
-+ siram_code);
-+}
-+
-+static void config_si(struct tdm_ctrl *tdm_c)
-+{
-+ u8 rxsyncdelay, txsyncdelay, tdm_port;
-+ u16 sixmr_val = 0;
-+ u32 tdma_mode_off;
-+ u16 *si1_tdm_mode_reg;
-+
-+ tdm_port = tdm_c->tdm_port;
-+
-+ set_siram(tdm_c, COMM_DIR_RX);
-+
-+ set_siram(tdm_c, COMM_DIR_TX);
-+
-+ rxsyncdelay = tdm_c->cfg_ctrl.rx_fr_sync_delay;
-+ txsyncdelay = tdm_c->cfg_ctrl.tx_fr_sync_delay;
-+ if (tdm_c->cfg_ctrl.com_pin)
-+ sixmr_val |= SIMODE_CRT;
-+ if (tdm_c->cfg_ctrl.fr_sync_level == 1)
-+ sixmr_val |= SIMODE_SL;
-+ if (tdm_c->cfg_ctrl.clk_edge == 1)
-+ sixmr_val |= SIMODE_CE;
-+ if (tdm_c->cfg_ctrl.fr_sync_edge == 1)
-+ sixmr_val |= SIMODE_FE;
-+ sixmr_val |= (SIMODE_TFSD(txsyncdelay) | SIMODE_RFSD(rxsyncdelay));
-+
-+ tdma_mode_off = SI_TDM_MODE_REGISTER_OFFSET * tdm_c->tdm_port;
-+
-+ si1_tdm_mode_reg = (u8 *)&qe_immr->si1 + tdma_mode_off;
-+ out_be16(si1_tdm_mode_reg, sixmr_val);
-+
-+ dump_siram(tdm_c);
-+}
-+
-+static int tdm_init(struct tdm_ctrl *tdm_c)
-+{
-+ u32 tdm_port, ucc, act_num_ts;
-+ int ret, i, err;
-+ u32 cecr_subblock;
-+ u32 pram_offset;
-+ u32 rxbdt_offset;
-+ u32 txbdt_offset;
-+ u32 rx_ucode_buf_offset, tx_ucode_buf_offset;
-+ u16 bd_status, bd_len;
-+ enum qe_clock clock;
-+ struct qe_bd __iomem *rx_bd, *tx_bd;
-+
-+ tdm_port = tdm_c->tdm_port;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+ act_num_ts = tdm_c->cfg_ctrl.active_num_ts;
-+
-+ /*
-+ * TDM Tx and Rx CLKs = 2048 KHz.
-+ */
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_tx_clk, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_tx_clk);
-+ err = qe_setbrg(clock, 2048000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_tx_clk);
-+ return err;
-+ }
-+ }
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_rx_clk, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_rx_clk);
-+ err = qe_setbrg(clock, 2048000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_rx_clk);
-+ return err;
-+ }
-+ }
-+ /*
-+ * TDM FSyncs = 4 KHz.
-+ */
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_tx_sync, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_tx_sync);
-+ err = qe_setbrg(clock, 4000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_tx_sync);
-+ return err;
-+ }
-+ }
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_rx_sync, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_rx_sync);
-+ err = qe_setbrg(clock, 4000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_rx_sync);
-+ return err;
-+ }
-+ }
-+
-+ tdm_c->ut_info->uf_info.uccm_mask = (u32)
-+ ((UCC_TRANS_UCCE_RXB | UCC_TRANS_UCCE_BSY) << 16);
-+
-+ if (ucc_fast_init(&(tdm_c->ut_info->uf_info), &tdm_c->uf_private)) {
-+ printk(KERN_ERR "%s: Failed to init uccf\n", __FUNCTION__);
-+ return -ENOMEM;
-+ }
-+
-+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_RX | COMM_DIR_TX);
-+
-+ /* Write to QE CECR, UCCx channel to Stop Transmission */
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_STOP_TX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+
-+ pram_offset = qe_muram_alloc(UCC_TRANSPARENT_PRAM_SIZE,
-+ ALIGNMENT_OF_UCC_SLOW_PRAM);
-+ if (IS_ERR_VALUE(pram_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for"
-+ " transparent UCC\n", __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto pram_alloc_error;
-+ }
-+
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, cecr_subblock,
-+ QE_CR_PROTOCOL_UNSPECIFIED, pram_offset);
-+
-+ tdm_c->ucc_pram = qe_muram_addr(pram_offset);
-+ tdm_c->ucc_pram_offset = pram_offset;
-+
-+ /*
-+ * zero-out pram, this will also ensure RSTATE, TSTATE are cleared, also
-+ * DISFC & CRCEC counters will be initialized.
-+ */
-+ memset(tdm_c->ucc_pram, 0, sizeof(struct ucc_transparent_pram));
-+
-+ /* rbase, tbase alignment is 8. */
-+ rxbdt_offset = qe_muram_alloc(NR_BUFS * sizeof(struct qe_bd),
-+ QE_ALIGNMENT_OF_BD);
-+ if (IS_ERR_VALUE(rxbdt_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for RxBDs\n",
-+ __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto rxbd_alloc_error;
-+ }
-+ txbdt_offset = qe_muram_alloc(NR_BUFS * sizeof(struct qe_bd),
-+ QE_ALIGNMENT_OF_BD);
-+ if (IS_ERR_VALUE(txbdt_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for TxBDs\n",
-+ __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto txbd_alloc_error;
-+ }
-+ tdm_c->tx_bd = qe_muram_addr(txbdt_offset);
-+ tdm_c->rx_bd = qe_muram_addr(rxbdt_offset);
-+
-+ tdm_c->tx_bd_offset = txbdt_offset;
-+ tdm_c->rx_bd_offset = rxbdt_offset;
-+
-+ rx_bd = tdm_c->rx_bd;
-+ tx_bd = tdm_c->tx_bd;
-+
-+ out_be32(&tdm_c->ucc_pram->rbase, (u32) immrbar_virt_to_phys(rx_bd));
-+ out_be32(&tdm_c->ucc_pram->tbase, (u32) immrbar_virt_to_phys(tx_bd));
-+
-+ for (i = 0; i < NR_BUFS - 1; i++) {
-+ bd_status = (u16) ((R_E | R_CM | R_I) >> 16);
-+ bd_len = 0;
-+ out_be16(&rx_bd->length, bd_len);
-+ out_be16(&rx_bd->status, bd_status);
-+ out_be32(&rx_bd->buf,
-+ tdm_c->dma_input_addr + i * SAMPLE_DEPTH * act_num_ts);
-+ rx_bd += 1;
-+
-+ bd_status = (u16) ((T_R | T_CM) >> 16);
-+ bd_len = SAMPLE_DEPTH * act_num_ts;
-+ out_be16(&tx_bd->length, bd_len);
-+ out_be16(&tx_bd->status, bd_status);
-+ out_be32(&tx_bd->buf,
-+ tdm_c->dma_output_addr + i * SAMPLE_DEPTH * act_num_ts);
-+ tx_bd += 1;
-+ }
-+
-+ bd_status = (u16) ((R_E | R_CM | R_I | R_W) >> 16);
-+ bd_len = 0;
-+ out_be16(&rx_bd->length, bd_len);
-+ out_be16(&rx_bd->status, bd_status);
-+ out_be32(&rx_bd->buf,
-+ tdm_c->dma_input_addr + i * SAMPLE_DEPTH * act_num_ts);
-+
-+ bd_status = (u16) ((T_R | T_CM | T_W) >> 16);
-+ bd_len = SAMPLE_DEPTH * act_num_ts;
-+ out_be16(&tx_bd->length, bd_len);
-+ out_be16(&tx_bd->status, bd_status);
-+ out_be32(&tx_bd->buf,
-+ tdm_c->dma_output_addr + i * SAMPLE_DEPTH * act_num_ts);
-+
-+ config_si(tdm_c);
-+
-+ setbits32(&qe_immr->ic.qimr, (0x80000000UL >> ucc));
-+
-+ rx_ucode_buf_offset = qe_muram_alloc(32, 32);
-+ if (IS_ERR_VALUE(rx_ucode_buf_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM mem for Rx"
-+ " ucode buf\n", __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto rxucode_buf_alloc_error;
-+ }
-+
-+ tx_ucode_buf_offset = qe_muram_alloc(32, 32);
-+ if (IS_ERR_VALUE(tx_ucode_buf_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM mem for Tx"
-+ " ucode buf\n", __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto txucode_buf_alloc_error;
-+ }
-+ out_be16(&tdm_c->ucc_pram->riptr, (u16) rx_ucode_buf_offset);
-+ out_be16(&tdm_c->ucc_pram->tiptr, (u16) tx_ucode_buf_offset);
-+
-+ tdm_c->rx_ucode_buf_offset = rx_ucode_buf_offset;
-+ tdm_c->tx_ucode_buf_offset = tx_ucode_buf_offset;
-+
-+ /*
-+ * set the receive buffer descriptor maximum size to be
-+ * SAMPLE_DEPTH * number of active RX channels
-+ */
-+ out_be16(&tdm_c->ucc_pram->mrblr, (u16) SAMPLE_DEPTH * act_num_ts);
-+
-+ /*
-+ * enable snooping and BE byte ordering on the UCC pram's
-+ * tstate & rstate registers.
-+ */
-+ out_be32(&tdm_c->ucc_pram->tstate, 0x30000000UL);
-+ out_be32(&tdm_c->ucc_pram->rstate, 0x30000000UL);
-+
-+ /*Put UCC transparent controller into serial interface mode. */
-+ out_be32(&tdm_c->uf_regs->upsmr, 0);
-+
-+ /* Reset TX and RX for UCCx */
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+
-+ return 0;
-+
-+txucode_buf_alloc_error:
-+ qe_muram_free(rx_ucode_buf_offset);
-+rxucode_buf_alloc_error:
-+ qe_muram_free(txbdt_offset);
-+txbd_alloc_error:
-+ qe_muram_free(rxbdt_offset);
-+rxbd_alloc_error:
-+ qe_muram_free(pram_offset);
-+pram_alloc_error:
-+ ucc_fast_free(tdm_c->uf_private);
-+ return ret;
-+}
-+
-+static void tdm_deinit(struct tdm_ctrl *tdm_c)
-+{
-+ qe_muram_free(tdm_c->rx_ucode_buf_offset);
-+ qe_muram_free(tdm_c->tx_ucode_buf_offset);
-+
-+ if (tdm_c->rx_bd_offset) {
-+ qe_muram_free(tdm_c->rx_bd_offset);
-+ tdm_c->rx_bd = NULL;
-+ tdm_c->rx_bd_offset = 0;
-+ }
-+ if (tdm_c->tx_bd_offset) {
-+ qe_muram_free(tdm_c->tx_bd_offset);
-+ tdm_c->tx_bd = NULL;
-+ tdm_c->tx_bd_offset = 0;
-+ }
-+ if (tdm_c->ucc_pram_offset) {
-+ qe_muram_free(tdm_c->ucc_pram_offset);
-+ tdm_c->ucc_pram = NULL;
-+ tdm_c->ucc_pram_offset = 0;
-+ }
-+}
-+
-+
-+static irqreturn_t tdm_isr(int irq, void *dev_id)
-+{
-+ u8 *input_tdm_buffer, *output_tdm_buffer;
-+ u32 txb, rxb;
-+ u32 ucc;
-+ register u32 ucce = 0;
-+ struct tdm_ctrl *tdm_c;
-+ tdm_c = (struct tdm_ctrl *)dev_id;
-+
-+ tdm_c->tdm_icnt++;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+ input_tdm_buffer = tdm_c->tdm_input_data;
-+ output_tdm_buffer = tdm_c->tdm_output_data;
-+
-+ if (in_be32(tdm_c->uf_private->p_ucce) &
-+ (UCC_TRANS_UCCE_BSY << 16)) {
-+ out_be32(tdm_c->uf_private->p_ucce,
-+ (UCC_TRANS_UCCE_BSY << 16));
-+ pr_info("%s: From tdm isr busy interrupt\n",
-+ __FUNCTION__);
-+ dump_ucc(tdm_c);
-+
-+ return IRQ_HANDLED;
-+ }
-+
-+ if (tdm_c->tdm_flag == 1) {
-+ /* track phases for Rx/Tx */
-+ tdm_c->phase_rx += 1;
-+ if (tdm_c->phase_rx == MAX_PHASE)
-+ tdm_c->phase_rx = 0;
-+
-+ tdm_c->phase_tx += 1;
-+ if (tdm_c->phase_tx == MAX_PHASE)
-+ tdm_c->phase_tx = 0;
-+
-+#ifdef CONFIG_TDM_HW_LB_TSA_SLIC
-+ {
-+ u32 temp_rx, temp_tx, phase_tx, phase_rx;
-+ int i;
-+ phase_rx = tdm_c->phase_rx;
-+ phase_tx = tdm_c->phase_tx;
-+ if (phase_rx == 0)
-+ phase_rx = MAX_PHASE;
-+ else
-+ phase_rx -= 1;
-+ if (phase_tx == 0)
-+ phase_tx = MAX_PHASE;
-+ else
-+ phase_tx -= 1;
-+ temp_rx = phase_rx * SAMPLE_DEPTH * ACTIVE_CH;
-+ temp_tx = phase_tx * SAMPLE_DEPTH * ACTIVE_CH;
-+
-+ /*check if loopback received data on TS0 is correct. */
-+ pr_debug("%s: check if loopback received data on TS0"
-+ " is correct\n", __FUNCTION__);
-+ pr_debug("%d,%d ", phase_rx, phase_tx);
-+ for (i = 0; i < 8; i++)
-+ pr_debug("%1d,%1d ",
-+ input_tdm_buffer[temp_rx + i],
-+ output_tdm_buffer[temp_tx + i]);
-+ pr_debug("\n");
-+ }
-+#endif
-+
-+ /* schedule BH */
-+ wake_up_interruptible(&tdm_c->wakeup_event);
-+ } else {
-+ if (tdm_c->tdm_icnt == STUTTER_INT_CNT) {
-+ txb = in_be32(&tdm_c->ucc_pram->tbptr) -
-+ in_be32(&tdm_c->ucc_pram->tbase);
-+ rxb = in_be32(&tdm_c->ucc_pram->rbptr) -
-+ in_be32(&tdm_c->ucc_pram->rbase);
-+ tdm_c->phase_tx = txb / sizeof(struct qe_bd);
-+ tdm_c->phase_rx = rxb / sizeof(struct qe_bd);
-+
-+#ifdef CONFIG_TDM_HW_LB_TSA_SLIC
-+ tdm_c->phase_tx = tdm_c->phase_rx;
-+#endif
-+
-+ /* signal "stuttering" period is over */
-+ tdm_c->tdm_flag = 1;
-+
-+ pr_debug("%s: stuttering period is over\n",
-+ __FUNCTION__);
-+
-+ if (in_be32(tdm_c->uf_private->p_ucce) &
-+ (UCC_TRANS_UCCE_TXE << 16)) {
-+ u32 cecr_subblock;
-+ out_be32(tdm_c->uf_private->p_ucce,
-+ (UCC_TRANS_UCCE_TXE << 16));
-+ pr_debug("%s: From tdm isr txe interrupt\n",
-+ __FUNCTION__);
-+
-+ cecr_subblock =
-+ ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED,
-+ 0);
-+ }
-+ }
-+ }
-+
-+ ucce = (in_be32(tdm_c->uf_private->p_ucce)
-+ & in_be32(tdm_c->uf_private->p_uccm));
-+
-+ out_be32(tdm_c->uf_private->p_ucce, ucce);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int tdm_start(struct tdm_ctrl *tdm_c)
-+{
-+ if (request_irq(tdm_c->ut_info->uf_info.irq, tdm_isr,
-+ 0, "tdm", tdm_c)) {
-+ printk(KERN_ERR "%s: request_irq for tdm_isr failed\n",
-+ __FUNCTION__);
-+ return -ENODEV;
-+ }
-+
-+ ucc_fast_enable(tdm_c->uf_private, COMM_DIR_RX | COMM_DIR_TX);
-+
-+ pr_info("%s 16-bit linear pcm mode active with"
-+ " slots 0 & 2\n", __FUNCTION__);
-+
-+ dump_siram(tdm_c);
-+ dump_ucc(tdm_c);
-+
-+ setbits8(&(qe_immr->si1.siglmr1_h), (0x1 << tdm_c->tdm_port));
-+ pr_info("%s UCC based TDM enabled\n", __FUNCTION__);
-+
-+ return 0;
-+}
-+
-+static void tdm_stop(struct tdm_ctrl *tdm_c)
-+{
-+ u32 port, si;
-+ u32 ucc;
-+ u32 cecr_subblock;
-+
-+ port = tdm_c->tdm_port;
-+ si = tdm_c->si;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+
-+ qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+ qe_issue_cmd(QE_CLOSE_RX_BD, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+
-+ clrbits8(&qe_immr->si1.siglmr1_h, (0x1 << port));
-+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_RX);
-+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_TX);
-+ free_irq(tdm_c->ut_info->uf_info.irq, tdm_c);
-+}
-+
-+
-+static void config_tdm(struct tdm_ctrl *tdm_c)
-+{
-+ u32 i, j, k;
-+
-+ j = 0;
-+ k = 0;
-+
-+ /* Set Mask Bits */
-+ for (i = 0; i < ACTIVE_CH; i++) {
-+ tdm_c->tx_mask[k] |= (1 << j);
-+ tdm_c->rx_mask[k] |= (1 << j);
-+ j++;
-+ if (j >= 16) {
-+ j = 0;
-+ k++;
-+ }
-+ }
-+ /* physical number of slots in a frame */
-+ tdm_c->physical_num_ts = NUM_TS;
-+
-+ /* common receive and transmit pins */
-+ tdm_c->cfg_ctrl.com_pin = 1;
-+
-+ /* L1R/TSYNC active logic "1" */
-+ tdm_c->cfg_ctrl.fr_sync_level = 0;
-+
-+ /*
-+ * TX data on rising edge of clock
-+ * RX data on falling edge
-+ */
-+ tdm_c->cfg_ctrl.clk_edge = 0;
-+
-+ /* Frame sync sampled on falling edge */
-+ tdm_c->cfg_ctrl.fr_sync_edge = 0;
-+
-+ /* no bit delay */
-+ tdm_c->cfg_ctrl.rx_fr_sync_delay = 0;
-+
-+ /* no bit delay */
-+ tdm_c->cfg_ctrl.tx_fr_sync_delay = 0;
-+
-+#ifndef CONFIG_TDM_HW_LB_TSA_SLIC
-+ if (tdm_c->leg_slic) {
-+ /* Need 1 bit delay for Legrity SLIC */
-+ tdm_c->cfg_ctrl.rx_fr_sync_delay = 1;
-+ tdm_c->cfg_ctrl.tx_fr_sync_delay = 1;
-+ pr_info("%s Delay for Legerity!\n", __FUNCTION__);
-+ }
-+#endif
-+
-+ tdm_c->cfg_ctrl.active_num_ts = ACTIVE_CH;
-+}
-+
-+static void tdm_read(u32 client_id, short chn_id, short *pcm_buffer,
-+ short len)
-+{
-+ int i;
-+ u32 phase_rx;
-+ /* point to where to start for the current phase data processing */
-+ u32 temp_rx;
-+
-+ struct tdm_ctrl *tdm_c = tdm_ctrl[client_id];
-+
-+ u16 *input_tdm_buffer =
-+ (u16 *)tdm_c->tdm_input_data;
-+
-+ phase_rx = tdm_c->phase_rx;
-+ if (phase_rx == 0)
-+ phase_rx = MAX_PHASE;
-+ else
-+ phase_rx -= 1;
-+
-+ temp_rx = phase_rx * SAMPLE_DEPTH * EFF_ACTIVE_CH;
-+
-+#ifdef UCC_CACHE_SNOOPING_DISABLED
-+ flush_dcache_range((size_t) &input_tdm_buffer[temp_rx],
-+ (size_t) &input_tdm_buffer[temp_rx +
-+ SAMPLE_DEPTH * ACTIVE_CH]);
-+#endif
-+ for (i = 0; i < len; i++)
-+ pcm_buffer[i] =
-+ input_tdm_buffer[i * EFF_ACTIVE_CH + temp_rx + chn_id];
-+
-+}
-+
-+static void tdm_write(u32 client_id, short chn_id, short *pcm_buffer,
-+ short len)
-+{
-+ int i;
-+ int phase_tx;
-+ u32 txb;
-+ /* point to where to start for the current phase data processing */
-+ int temp_tx;
-+ struct tdm_ctrl *tdm_c = tdm_ctrl[client_id];
-+
-+ u16 *output_tdm_buffer;
-+ output_tdm_buffer = (u16 *)tdm_c->tdm_output_data;
-+ txb = in_be32(&tdm_c->ucc_pram->tbptr) -
-+ in_be32(&tdm_c->ucc_pram->tbase);
-+ phase_tx = txb / sizeof(struct qe_bd);
-+
-+ if (phase_tx == 0)
-+ phase_tx = MAX_PHASE;
-+ else
-+ phase_tx -= 1;
-+
-+ temp_tx = phase_tx * SAMPLE_DEPTH * EFF_ACTIVE_CH;
-+
-+ for (i = 0; i < len; i++)
-+ output_tdm_buffer[i * EFF_ACTIVE_CH + temp_tx + chn_id] =
-+ pcm_buffer[i];
-+
-+#ifdef UCC_CACHE_SNOOPING_DISABLED
-+ flush_dcache_range((size_t) &output_tdm_buffer[temp_tx],
-+ (size_t) &output_tdm_buffer[temp_tx + SAMPLE_DEPTH *
-+ ACTIVE_CH]);
-+#endif
-+}
-+
-+
-+static int tdm_register_client(struct tdm_client *tdm_client)
-+{
-+ u32 i;
-+ if (num_tdm_clients == num_tdm_devices) {
-+ printk(KERN_ERR "all TDM devices busy\n");
-+ return -EBUSY;
-+ }
-+
-+ for (i = 0; i < num_tdm_devices; i++) {
-+ if (!tdm_ctrl[i]->device_busy) {
-+ tdm_ctrl[i]->device_busy = 1;
-+ break;
-+ }
-+ }
-+ num_tdm_clients++;
-+ tdm_client->client_id = i;
-+ tdm_client->tdm_read = tdm_read;
-+ tdm_client->tdm_write = tdm_write;
-+ tdm_client->wakeup_event =
-+ &(tdm_ctrl[i]->wakeup_event);
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(tdm_register_client);
-+
-+static int tdm_deregister_client(struct tdm_client *tdm_client)
-+{
-+ num_tdm_clients--;
-+ tdm_ctrl[tdm_client->client_id]->device_busy = 0;
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(tdm_deregister_client);
-+
-+static int ucc_tdm_probe(struct of_device *ofdev,
-+ const struct of_device_id *match)
-+{
-+ struct device_node *np = ofdev->node;
-+ struct resource res;
-+ const unsigned int *prop;
-+ u32 ucc_num, device_num, err, ret = 0;
-+ struct device_node *np_tmp;
-+ dma_addr_t physaddr;
-+ void *tdm_buff;
-+ struct ucc_tdm_info *ut_info;
-+
-+ prop = of_get_property(np, "device-id", NULL);
-+ if (prop == NULL) {
-+ printk(KERN_ERR "ucc_tdm: device-id missing\n");
-+ return -ENODEV;
-+ }
-+
-+ ucc_num = *prop - 1;
-+ if ((ucc_num < 0) || (ucc_num > 7))
-+ return -ENODEV;
-+
-+ ut_info = &utdm_info[ucc_num];
-+ if (ut_info->ucc_busy) {
-+ printk(KERN_ERR "ucc_tdm: UCC in use by another TDM driver"
-+ "instance\n");
-+ return -EBUSY;
-+ }
-+ if (num_tdm_devices == MAX_NUM_TDM_DEVICES) {
-+ printk(KERN_ERR "ucc_tdm: All TDM devices already"
-+ " initialized\n");
-+ return -ENODEV;
-+ }
-+
-+ ut_info->ucc_busy = 1;
-+ tdm_ctrl[num_tdm_devices++] =
-+ kzalloc(sizeof(struct tdm_ctrl), GFP_KERNEL);
-+ if (!tdm_ctrl[num_tdm_devices - 1]) {
-+ printk(KERN_ERR "ucc_tdm: no memory to allocate for"
-+ " tdm control structure\n");
-+ num_tdm_devices--;
-+ return -ENOMEM;
-+ }
-+ device_num = num_tdm_devices - 1;
-+
-+ tdm_ctrl[device_num]->device = &ofdev->dev;
-+ tdm_ctrl[device_num]->ut_info = ut_info;
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.ucc_num = ucc_num;
-+
-+ prop = of_get_property(np, "fsl,tdm-num", NULL);
-+ if (prop == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->tdm_port = *prop - 1;
-+
-+ if (tdm_ctrl[device_num]->tdm_port > 3) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ prop = of_get_property(np, "fsl,si-num", NULL);
-+ if (prop == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->si = *prop - 1;
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_clk =
-+ of_get_property(np, "fsl,tdm-tx-clk", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_clk == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_clk =
-+ of_get_property(np, "fsl,tdm-rx-clk", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_clk == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_sync =
-+ of_get_property(np, "fsl,tdm-tx-sync", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_sync == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_sync =
-+ of_get_property(np, "fsl,tdm-rx-sync", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_sync == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.irq =
-+ irq_of_parse_and_map(np, 0);
-+ err = of_address_to_resource(np, 0, &res);
-+ if (err) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+ tdm_ctrl[device_num]->ut_info->uf_info.regs = res.start;
-+ tdm_ctrl[device_num]->uf_regs = of_iomap(np, 0);
-+
-+ np_tmp = NULL;
-+ np_tmp = of_find_compatible_node(np_tmp, "slic", "legerity-slic");
-+ if (np_tmp != NULL) {
-+ tdm_ctrl[device_num]->leg_slic = 1;
-+ of_node_put(np_tmp);
-+ } else
-+ tdm_ctrl[device_num]->leg_slic = 0;
-+
-+ config_tdm(tdm_ctrl[device_num]);
-+
-+ tdm_buff = dma_alloc_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
-+ tdm_ctrl[device_num]->cfg_ctrl.active_num_ts,
-+ &physaddr, GFP_KERNEL);
-+ if (!tdm_buff) {
-+ printk(KERN_ERR "ucc-tdm: could not allocate buffer"
-+ "descriptors\n");
-+ ret = -ENOMEM;
-+ goto alloc_error;
-+ }
-+
-+ tdm_ctrl[device_num]->tdm_input_data = tdm_buff;
-+ tdm_ctrl[device_num]->dma_input_addr = physaddr;
-+
-+ tdm_ctrl[device_num]->tdm_output_data = tdm_buff + NR_BUFS *
-+ SAMPLE_DEPTH * tdm_ctrl[device_num]->cfg_ctrl.active_num_ts;
-+ tdm_ctrl[device_num]->dma_output_addr = physaddr + NR_BUFS *
-+ SAMPLE_DEPTH * tdm_ctrl[device_num]->cfg_ctrl.active_num_ts;
-+
-+ init_waitqueue_head(&(tdm_ctrl[device_num]->wakeup_event));
-+
-+ ret = tdm_init(tdm_ctrl[device_num]);
-+ if (ret != 0)
-+ goto tdm_init_error;
-+
-+ ret = tdm_start(tdm_ctrl[device_num]);
-+ if (ret != 0)
-+ goto tdm_start_error;
-+
-+ dev_set_drvdata(&(ofdev->dev), tdm_ctrl[device_num]);
-+
-+ pr_info("%s UCC based tdm module installed\n", __FUNCTION__);
-+ return 0;
-+
-+tdm_start_error:
-+ tdm_deinit(tdm_ctrl[device_num]);
-+tdm_init_error:
-+ dma_free_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
-+ tdm_ctrl[device_num]->cfg_ctrl.active_num_ts,
-+ tdm_ctrl[device_num]->tdm_input_data,
-+ tdm_ctrl[device_num]->dma_input_addr);
-+
-+alloc_error:
-+ irq_dispose_mapping(tdm_ctrl[device_num]->ut_info->uf_info.irq);
-+ iounmap(tdm_ctrl[device_num]->uf_regs);
-+
-+get_property_error:
-+ num_tdm_devices--;
-+ kfree(tdm_ctrl[device_num]);
-+ ut_info->ucc_busy = 0;
-+ return ret;
-+}
-+
-+static int ucc_tdm_remove(struct of_device *ofdev)
-+{
-+ struct tdm_ctrl *tdm_c;
-+ struct ucc_tdm_info *ut_info;
-+ u32 ucc_num;
-+
-+ tdm_c = dev_get_drvdata(&(ofdev->dev));
-+ dev_set_drvdata(&(ofdev->dev), NULL);
-+ ucc_num = tdm_c->ut_info->uf_info.ucc_num;
-+ ut_info = &utdm_info[ucc_num];
-+ tdm_stop(tdm_c);
-+ tdm_deinit(tdm_c);
-+
-+ ucc_fast_free(tdm_c->uf_private);
-+
-+ dma_free_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
-+ tdm_c->cfg_ctrl.active_num_ts,
-+ tdm_c->tdm_input_data,
-+ tdm_c->dma_input_addr);
-+
-+ irq_dispose_mapping(tdm_c->ut_info->uf_info.irq);
-+ iounmap(tdm_c->uf_regs);
-+
-+ num_tdm_devices--;
-+ kfree(tdm_c);
-+
-+ ut_info->ucc_busy = 0;
-+
-+ pr_info("%s UCC based tdm module uninstalled\n", __FUNCTION__);
-+ return 0;
-+}
-+
-+const struct of_device_id ucc_tdm_match[] = {
-+ { .type = "tdm", .compatible = "fsl,ucc-tdm", },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, ucc_tdm_match);
-+
-+static struct of_platform_driver ucc_tdm_driver = {
-+ .name = DRV_NAME,
-+ .match_table = ucc_tdm_match,
-+ .probe = ucc_tdm_probe,
-+ .remove = ucc_tdm_remove,
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init ucc_tdm_init(void)
-+{
-+ u32 i;
-+
-+ pr_info("ucc_tdm: " DRV_DESC "\n");
-+ for (i = 0; i < 8; i++)
-+ memcpy(&(utdm_info[i]), &utdm_primary_info,
-+ sizeof(utdm_primary_info));
-+
-+ return of_register_platform_driver(&ucc_tdm_driver);
-+}
-+
-+static void __exit ucc_tdm_exit(void)
-+{
-+ of_unregister_platform_driver(&ucc_tdm_driver);
-+}
-+
-+module_init(ucc_tdm_init);
-+module_exit(ucc_tdm_exit);
-+MODULE_AUTHOR("Freescale Semiconductor, Inc");
-+MODULE_DESCRIPTION(DRV_DESC);
-+MODULE_LICENSE("GPL");
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_INTEL_MID_PTI) += pti.o
- obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
- obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
- obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
-+obj-$(CONFIG_UCC_TDM) += ucc_tdm.o
- obj-$(CONFIG_BMP085) += bmp085.o
- obj-$(CONFIG_BMP085_I2C) += bmp085-i2c.o
- obj-$(CONFIG_BMP085_SPI) += bmp085-spi.o
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -210,6 +210,20 @@ config ATMEL_SSC
-
- If unsure, say N.
-
-+config UCC_TDM
-+ tristate "Freescale UCC TDM Driver"
-+ depends on QUICC_ENGINE && UCC_FAST
-+ default n
-+ help
-+ The TDM driver is for UCC based TDM devices for example, TDM device on
-+ MPC832x RDB. Select it to run PowerVoIP on MPC832x RDB board.
-+ The TDM driver can interface with SLIC kind of devices to transmit
-+ and receive TDM samples. The TDM driver receives Time Division
-+ multiplexed samples(for different channels) from the SLIC device,
-+ demutiplexes them and sends them to the upper layers. At the transmit
-+ end the TDM drivers receives samples for different channels, it
-+ multiplexes them and sends them to the SLIC device.
-+
- config ENCLOSURE_SERVICES
- tristate "Enclosure Services"
- default n
---- a/arch/powerpc/include/asm/ucc_fast.h
-+++ b/arch/powerpc/include/asm/ucc_fast.h
-@@ -150,6 +150,10 @@ struct ucc_fast_info {
- enum ucc_fast_rx_decoding_method renc;
- enum ucc_fast_transparent_tcrc tcrc;
- enum ucc_fast_sync_len synl;
-+ char *tdm_rx_clk;
-+ char *tdm_tx_clk;
-+ char *tdm_rx_sync;
-+ char *tdm_tx_sync;
- };
-
- struct ucc_fast_private {
---- a/arch/powerpc/include/asm/qe.h
-+++ b/arch/powerpc/include/asm/qe.h
-@@ -670,6 +670,14 @@ struct ucc_slow_pram {
- #define UCC_GETH_UCCE_RXF1 0x00000002
- #define UCC_GETH_UCCE_RXF0 0x00000001
-
-+/* Transparent UCC Event Register (UCCE) */
-+#define UCC_TRANS_UCCE_GRA 0x0080
-+#define UCC_TRANS_UCCE_TXE 0x0010
-+#define UCC_TRANS_UCCE_RXF 0x0008
-+#define UCC_TRANS_UCCE_BSY 0x0004
-+#define UCC_TRANS_UCCE_TXB 0x0002
-+#define UCC_TRANS_UCCE_RXB 0x0001
-+
- /* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
- #define UCC_UART_UPSMR_FLC 0x8000
- #define UCC_UART_UPSMR_SL 0x4000
+++ /dev/null
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -89,7 +89,8 @@ src-plat-$(CONFIG_44x) += treeboot-ebony
- src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
- src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
- src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
--src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c
-+src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c \
-+ rb600.c rb333.c
- src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
- src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
- cuboot-c2k.c gamecube-head.S \
-@@ -261,6 +262,8 @@ image-$(CONFIG_MPC834x_ITX) += cuImage.
- image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds
- image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds
- image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot
-+image-$(CONFIG_RB_PPC) += dtbImage.rb600 \
-+ dtbImage.rb333
-
- # Board ports in arch/powerpc/platform/85xx/Kconfig
- image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
---- /dev/null
-+++ b/arch/powerpc/boot/dts/rb600.dts
-@@ -0,0 +1,283 @@
-+/*
-+ * RouterBOARD 600 series Device Tree Source
-+ *
-+ * Copyright 2009 Michael Guntsche <mike@it-loops.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+/dts-v1/;
-+
-+/ {
-+ model = "RB600";
-+ compatible = "MPC83xx";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ aliases {
-+ ethernet0 = &enet0;
-+ ethernet1 = &enet1;
-+ pci0 = &pci0;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 board=mpc8323 rootfstype=squashfs,yaffs2,jffs2 root=/dev/mtdblock1 boot=1";
-+ linux,stdout-path = "/soc8343@e0000000/serial@4500";
-+ };
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ PowerPC,8343E@0 {
-+ device_type = "cpu";
-+ reg = <0x0>;
-+ d-cache-line-size = <0x20>;
-+ i-cache-line-size = <0x20>;
-+ d-cache-size = <0x8000>;
-+ i-cache-size = <0x8000>;
-+ timebase-frequency = <0x0000000>; // filled by the bootwrapper from the firmware blob
-+ clock-frequency = <0x00000000>; // filled by the bootwrapper from the firmware blob
-+ };
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
-+ };
-+
-+ cf@f9200000 {
-+ lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
-+ interrupt-at-level = <0x0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x16 0x8>;
-+ lbc_extra_divider = <0x1>;
-+ reg = <0xf9200000 0x200000>;
-+ device_type = "rb,cf";
-+ };
-+
-+ cf@f9000000 {
-+ lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
-+ interrupt-at-level = <0x0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x14 0x8>;
-+ lbc_extra_divider = <0x1>;
-+ reg = <0xf9000000 0x200000>;
-+ device_type = "rb,cf";
-+ };
-+
-+ flash {
-+ reg = <0xff800000 0x20000>;
-+ };
-+
-+ nnand {
-+ reg = <0xf0000000 0x1000>;
-+ };
-+
-+ nand {
-+ ale = <&gpio 0x6>;
-+ cle = <&gpio 0x5>;
-+ nce = <&gpio 0x4>;
-+ rdy = <&gpio 0x3>;
-+ reg = <0xf8000000 0x1000>;
-+ device_type = "rb,nand";
-+ };
-+
-+ fancon {
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x17 0x8>;
-+ sense = <&gpio 0x7>;
-+ fan_on = <&gpio 0x9>;
-+ };
-+
-+ pci0: pci@e0008500 {
-+ device_type = "pci";
-+ compatible = "fsl,mpc8349-pci";
-+ reg = <0xe0008500 0x100 0xe0008300 0x8>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
-+ bus-range = <0x0 0x0>;
-+ interrupt-map = <
-+ 0x5800 0x0 0x0 0x1 &ipic 0x15 0x8
-+ 0x6000 0x0 0x0 0x1 &ipic 0x30 0x8
-+ 0x6000 0x0 0x0 0x2 &ipic 0x11 0x8
-+ 0x6800 0x0 0x0 0x1 &ipic 0x11 0x8
-+ 0x6800 0x0 0x0 0x2 &ipic 0x12 0x8
-+ 0x7000 0x0 0x0 0x1 &ipic 0x12 0x8
-+ 0x7000 0x0 0x0 0x2 &ipic 0x13 0x8
-+ 0x7800 0x0 0x0 0x1 &ipic 0x13 0x8
-+ 0x7800 0x0 0x0 0x2 &ipic 0x30 0x8
-+ 0x8000 0x0 0x0 0x1 &ipic 0x30 0x8
-+ 0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
-+ 0x8000 0x0 0x0 0x3 &ipic 0x11 0x8
-+ 0x8000 0x0 0x0 0x4 &ipic 0x13 0x8
-+ 0xa000 0x0 0x0 0x1 &ipic 0x30 0x8
-+ 0xa000 0x0 0x0 0x2 &ipic 0x11 0x8
-+ 0xa000 0x0 0x0 0x3 &ipic 0x12 0x8
-+ 0xa000 0x0 0x0 0x4 &ipic 0x13 0x8
-+ 0xa800 0x0 0x0 0x1 &ipic 0x11 0x8
-+ 0xa800 0x0 0x0 0x2 &ipic 0x12 0x8
-+ 0xa800 0x0 0x0 0x3 &ipic 0x13 0x8
-+ 0xa800 0x0 0x0 0x4 &ipic 0x30 0x8>;
-+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-+ interrupt-parent = <&ipic>;
-+ };
-+
-+ soc8343@e0000000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ device_type = "soc";
-+ compatible = "simple-bus";
-+ ranges = <0x0 0xe0000000 0x100000>;
-+ reg = <0xe0000000 0x200>;
-+ bus-frequency = <0x1>;
-+
-+ led {
-+ user_led = <0x400 0x8>;
-+ };
-+
-+ beeper {
-+ reg = <0x500 0x100>;
-+ };
-+
-+ gpio: gpio@0 {
-+ reg = <0xc08 0x4>;
-+ device-id = <0x0>;
-+ compatible = "gpio";
-+ device_type = "gpio";
-+ };
-+
-+ dma@82a8 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-+ reg = <0x82a8 4>;
-+ ranges = <0 0x8100 0x1a8>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ cell-index = <0>;
-+ dma-channel@0 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0 0x80>;
-+ cell-index = <0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@80 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x80 0x80>;
-+ cell-index = <1>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@100 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x100 0x80>;
-+ cell-index = <2>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@180 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x180 0x28>;
-+ cell-index = <3>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ };
-+
-+ enet0: ethernet@25000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ cell-index = <0>;
-+ phy-handle = <&phy0>;
-+ tbi-handle = <&tbi0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ reg = <0x25000 0x1000>;
-+ ranges = <0x0 0x25000 0x1000>;
-+ compatible = "gianfar";
-+ model = "TSEC";
-+ device_type = "network";
-+
-+ mdio@520 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "fsl,gianfar-tbi";
-+ reg = <0x520 0x20>;
-+
-+ tbi0: tbi-phy@11 {
-+ reg = <0x11>;
-+ device_type = "tbi-phy";
-+ };
-+ };
-+ };
-+
-+ enet1: ethernet@24000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ cell-index = <1>;
-+ phy-handle = <&phy1>;
-+ tbi-handle = <&tbi1>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ reg = <0x24000 0x1000>;
-+ ranges = <0x0 0x24000 0x1000>;
-+ compatible = "gianfar";
-+ model = "TSEC";
-+ device_type = "network";
-+
-+ mdio@520 {
-+ #size-cells = <0x0>;
-+ #address-cells = <0x1>;
-+ reg = <0x520 0x20>;
-+ compatible = "fsl,gianfar-mdio";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0x0>;
-+ };
-+
-+ phy1: ethernet-phy@1 {
-+ device_type = "ethernet-phy";
-+ reg = <0x1>;
-+ };
-+
-+ tbi1: tbi-phy@11 {
-+ reg = <0x11>;
-+ device_type = "tbi-phy";
-+ };
-+ };
-+ };
-+
-+ ipic: pic@700 {
-+ interrupt-controller;
-+ #address-cells = <0>;
-+ #interrupt-cells = <2>;
-+ reg = <0x700 0x100>;
-+ device_type = "ipic";
-+ };
-+
-+ serial@4500 {
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x9 0x8>;
-+ clock-frequency = <0xfe4f840>;
-+ reg = <0x4500 0x100>;
-+ compatible = "ns16550";
-+ device_type = "serial";
-+ };
-+
-+ wdt@200 {
-+ reg = <0x200 0x100>;
-+ compatible = "mpc83xx_wdt";
-+ device_type = "watchdog";
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/powerpc/boot/rb600.c
-@@ -0,0 +1,70 @@
-+/*
-+ * The RouterBOARD platform -- for booting RB600(A) RouterBOARDs.
-+ *
-+ * Author: Michael Guntsche <mike@it-loops.com>
-+ *
-+ * Copyright (c) 2009 Michael Guntsche
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "types.h"
-+#include "io.h"
-+#include "stdio.h"
-+#include <libfdt.h>
-+
-+BSS_STACK(4*1024);
-+
-+u64 memsize64;
-+const void *fw_dtb;
-+
-+static void rb600_fixups(void)
-+{
-+ const u32 *reg, *timebase, *clock;
-+ int node, size;
-+
-+ dt_fixup_memory(0, memsize64);
-+
-+ /* Set the MAC addresses. */
-+ node = fdt_path_offset(fw_dtb, "/soc8343@e0000000/ethernet@24000");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet1", (const u8 *)reg);
-+
-+ node = fdt_path_offset(fw_dtb, "/soc8343@e0000000/ethernet@25000");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet0", (const u8 *)reg);
-+
-+ /* Find the CPU timebase and clock frequencies. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "cpu", sizeof("cpu"));
-+ timebase = fdt_getprop(fw_dtb, node, "timebase-frequency", &size);
-+ clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
-+ dt_fixup_cpu_clocks(*clock, *timebase, 0);
-+
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+ unsigned long r6, unsigned long r7)
-+{
-+ const u32 *reg;
-+ int node, size;
-+
-+ fw_dtb = (const void *)r3;
-+
-+ /* Find the memory range. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "memory", sizeof("memory"));
-+ reg = fdt_getprop(fw_dtb, node, "reg", &size);
-+ memsize64 = reg[1];
-+
-+ /* Now we have the memory size; initialize the heap. */
-+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
-+
-+ /* Prepare the device tree and find the console. */
-+ fdt_init(_dtb_start);
-+ serial_console_init();
-+
-+ /* Remaining fixups... */
-+ platform_ops.fixups = rb600_fixups;
-+}
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -217,7 +217,7 @@ ps3)
- make_space=n
- pie=
- ;;
--ep88xc|ep405|ep8248e)
-+ep88xc|ep405|ep8248e|rb600|rb333)
- platformo="$object/fixed-head.o $object/$platform.o"
- binary=y
- ;;
---- a/arch/powerpc/platforms/83xx/Kconfig
-+++ b/arch/powerpc/platforms/83xx/Kconfig
-@@ -38,6 +38,15 @@ config MPC832x_RDB
- help
- This option enables support for the MPC8323 RDB board.
-
-+config RB_PPC
-+ bool "MikroTik RouterBOARD 333/600 series"
-+ select DEFAULT_UIMAGE
-+ select QUICC_ENGINE
-+ select PPC_MPC832x
-+ select PPC_MPC834x
-+ help
-+ This option enables support for MikroTik RouterBOARD 333/600 series boards.
-+
- config MPC834x_MDS
- bool "Freescale MPC834x MDS"
- select DEFAULT_UIMAGE
---- /dev/null
-+++ b/arch/powerpc/boot/dts/rb333.dts
-@@ -0,0 +1,426 @@
-+
-+/*
-+ * RouterBOARD 333 series Device Tree Source
-+ *
-+ * Copyright 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ * Copyright 2009 Michael Guntsche <mike@it-loops.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * Warning (reg_format): "reg" property in /qe@e0100000/muram@10000/data-only@0 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
-+ * Warning (ranges_format): "ranges" property in /qe@e0100000/muram@10000 has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1)
-+ * Warning (avoid_default_addr_size): Relying on default #address-cells value for /qe@e0100000/muram@10000/data-only@0
-+ * Warning (avoid_default_addr_size): Relying on default #size-cells value for /qe@e0100000/muram@10000/data-only@0
-+ * Warning (obsolete_chosen_interrupt_controller): /chosen has obsolete "interrupt-controller" property
-+ *
-+ */
-+
-+
-+/dts-v1/;
-+
-+/ {
-+ model = "RB333";
-+ compatible = "MPC83xx";
-+ #size-cells = <1>;
-+ #address-cells = <1>;
-+
-+ aliases {
-+ ethernet0 = &enet0;
-+ ethernet1 = &enet1;
-+ ethernet2 = &enet2;
-+ pci0 = &pci0;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 board=mpc8323 rootfstype=squashfs,yaffs2,jffs2 root=/dev/mtdblock1 boot=1";
-+ // linux,platform = <0x8062>;
-+ // linux,initrd = <0x488000 0x0>;
-+ linux,stdout-path = "/soc8323@e0000000/serial@4500";
-+ // interrupt-controller = <&ipic>;
-+ };
-+
-+ cpus {
-+ #cpus = <1>;
-+ #size-cells = <0>;
-+ #address-cells = <1>;
-+
-+ PowerPC,8323E@0 {
-+ device_type = "cpu";
-+ reg = <0x0>;
-+ i-cache-size = <0x4000>;
-+ d-cache-size = <0x4000>;
-+ i-cache-line-size = <0x20>;
-+ d-cache-line-size = <0x20>;
-+ // clock-frequency = <0x13de3650>;
-+ // timebase-frequency = <0x1fc9f08>;
-+ timebase-frequency = <0x0000000>; // filled by the bootwrapper from the firmware blob
-+ clock-frequency = <0x00000000>; // filled by the bootwrapper from the firmware blob
-+ 32-bit;
-+ };
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x0 0x4000000>;
-+ // reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
-+ };
-+
-+ flash {
-+ reg = <0xfe000000 0x20000>;
-+ };
-+
-+ nand {
-+ ale = <&gpio2 0x3>;
-+ cle = <&gpio2 0x2>;
-+ nce = <&gpio2 0x1>;
-+ rdy = <&gpio2 0x0>;
-+ reg = <0xf8000000 0x1000>;
-+ device_type = "rb,nand";
-+ };
-+
-+ nnand {
-+ reg = <0xf0000000 0x1000>;
-+ };
-+
-+ voltage {
-+ voltage_gpio = <&gpio3 0x11>;
-+ };
-+
-+ fancon {
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x14 0x8>;
-+ fan_on = <&gpio0 0x10>;
-+ };
-+
-+ soc8323@e0000000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ device_type = "soc";
-+ compatible = "simple-bus";
-+ ranges = <0x0 0xe0000000 0x00100000>;
-+ reg = <0xe0000000 0x00000200>;
-+ bus-frequency = <1>;
-+
-+ wdt@200 {
-+ device_type = "watchdog";
-+ compatible = "mpc83xx_wdt";
-+ reg = <0x200 0x100>;
-+ };
-+
-+ ipic:pic@700 {
-+ interrupt-controller;
-+ #address-cells = <0>;
-+ #interrupt-cells = <2>;
-+ reg = <0x700 0x100>;
-+ device_type = "ipic";
-+ };
-+
-+ par_io@1400 {
-+ num-ports = <4>;
-+ device_type = "par_io";
-+ reg = <0x1400 0x100>;
-+
-+ ucc2pio: ucc_pin@02 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 3 4 3 0 2 0
-+ 3 5 1 0 2 0
-+ 0 18 1 0 1 0
-+ 0 19 1 0 1 0
-+ 0 20 1 0 1 0
-+ 0 21 1 0 1 0
-+ 0 30 1 0 1 0
-+ 3 6 2 0 1 0
-+ 0 29 2 0 1 0
-+ 0 31 2 0 1 0
-+ 0 22 2 0 1 0
-+ 0 23 2 0 1 0
-+ 0 24 2 0 1 0
-+ 0 25 2 0 1 0
-+ 0 28 2 0 1 0
-+ 0 26 2 0 1 0
-+ 3 31 2 0 1 0>;
-+ };
-+
-+ ucc3pio: ucc_pin@03 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 1 0 1 0 1 0
-+ 1 1 1 0 1 0
-+ 1 2 1 0 1 0
-+ 1 3 1 0 1 0
-+ 1 12 1 0 1 0
-+ 3 24 2 0 1 0
-+ 1 11 2 0 1 0
-+ 1 13 2 0 1 0
-+ 1 4 2 0 1 0
-+ 1 5 2 0 1 0
-+ 1 6 2 0 1 0
-+ 1 7 2 0 1 0
-+ 1 10 2 0 1 0
-+ 1 8 2 0 1 0
-+ 3 29 2 0 1 0>;
-+ };
-+
-+ ucc4pio: ucc_pin@04 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 1 18 1 0 1 0
-+ 1 19 1 0 1 0
-+ 1 20 1 0 1 0
-+ 1 21 1 0 1 0
-+ 1 30 1 0 1 0
-+ 3 20 2 0 1 0
-+ 1 30 2 0 1 0
-+ 1 31 2 0 1 0
-+ 1 22 2 0 1 0
-+ 1 23 2 0 1 0
-+ 1 24 2 0 1 0
-+ 1 25 2 0 1 0
-+ 1 28 2 0 1 0
-+ 1 26 2 0 1 0
-+ 3 21 2 0 1 0>;
-+ };
-+ };
-+
-+ serial0: serial@4500 {
-+ cell-index = <0>;
-+ device_type = "serial";
-+ compatible = "fsl,ns16550", "ns16550";
-+ reg = <0x4500 0x100>;
-+ clock-frequency = <0x7f27c20>;
-+ interrupts = <9 0x8>;
-+ interrupt-parent = <&ipic>;
-+ };
-+
-+ dma@82a8 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
-+ reg = <0x82a8 4>;
-+ ranges = <0 0x8100 0x1a8>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ cell-index = <0>;
-+ dma-channel@0 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0 0x80>;
-+ cell-index = <0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@80 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x80 0x80>;
-+ cell-index = <1>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@100 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x100 0x80>;
-+ cell-index = <2>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@180 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x180 0x28>;
-+ cell-index = <3>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ };
-+
-+ beeper {
-+ gpio = <&gpio3 0x12>;
-+ reg = <0x500 0x100>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x48 0x8>;
-+ };
-+
-+ gpio3: gpio@3 {
-+ reg = <0x144c 0x4>;
-+ device-id = <0x3>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+
-+ gpio2: gpio@2 {
-+ reg = <0x1434 0x4>;
-+ device-id = <0x2>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+
-+ gpio0: gpio@0 {
-+ reg = <0x1404 0x4>;
-+ device-id = <0x0>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+ };
-+
-+ pci0: pci@e0008500 {
-+ device_type = "pci";
-+ // compatible = "83xx";
-+ compatible = "fsl,mpc8349-pci";
-+ reg = <0xe0008500 0x100 0xe0008300 0x8>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ // clock-frequency = <0>;
-+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
-+ bus-range = <0x0 0x0>;
-+ interrupt-map = <
-+ /* IDSEL 0x10 AD16 miniPCI slot 0 */
-+ 0x8000 0x0 0x0 0x1 &ipic 0x11 0x8
-+ 0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
-+
-+ /* IDSEL 0x11 AD17 miniPCI slot 1 */
-+ 0x8800 0x0 0x0 0x1 &ipic 0x12 0x8
-+ 0x8800 0x0 0x0 0x2 &ipic 0x13 0x8
-+
-+ /* IDSEL 0x12 AD18 miniPCI slot 2 */
-+ 0x9000 0x0 0x0 0x1 &ipic 0x13 0x8
-+ 0x9000 0x0 0x0 0x2 &ipic 0x11 0x8>;
-+
-+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-+ interrupt-parent = <&ipic>;
-+ // interrupts = <66 0x8>;
-+ };
-+
-+ qe@e0100000 {
-+ reg = <0xe0100000 0x480>;
-+ ranges = <0x0 0xe0100000 0x100000>;
-+ model = "QE";
-+ device_type = "qe";
-+ compatible = "fsl,qe";
-+ #size-cells = <1>;
-+ #address-cells = <1>;
-+ brg-frequency = <0>;
-+ bus-frequency = <0>;
-+ // bus-frequency = <198000000>;
-+ fsl,qe-num-riscs = <1>;
-+ fsl,qe-num-snums = <28>;
-+
-+ qeic: qeic@80 {
-+ interrupt-controller;
-+ compatible = "fsl,qe-ic";
-+ big-endian;
-+ built-in;
-+ reg = <0x80 0x80>;
-+ #interrupt-cells = <1>;
-+ #address-cells = <0>;
-+ device_type = "qeic";
-+ interrupts = <0x20 0x8 0x21 0x8>;
-+ interrupt-parent = <&ipic>;
-+ };
-+
-+ mdio@2120 {
-+ compatible = "ucc_geth_phy";
-+ device_type = "mdio";
-+ reg = <0x3120 0x18>;
-+ #size-cells = <0>;
-+ #address-cells = <1>;
-+
-+ phy3: ethernet-phy@03 {
-+ // interface = <0x3>;
-+ device_type = "ethernet-phy";
-+ reg = <0x3>;
-+ };
-+
-+ phy2: ethernet-phy@02 {
-+ // interface = <0x3>;
-+ device_type = "ethernet-phy";
-+ reg = <0x2>;
-+ };
-+
-+ phy1: ethernet-phy@01 {
-+ // interface = <0x3>;
-+ device_type = "ethernet-phy";
-+ reg = <0x1>;
-+ };
-+ };
-+
-+ enet0: ucc@2200 {
-+ tx-clock = <0x1a>;
-+ rx-clock = <0x1f>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x22>;
-+ reg = <0x2200 0x200>;
-+ device-id = <0x3>;
-+ model = "UCC";
-+ compatible = "ucc_geth";
-+ device_type = "network";
-+ phy-handle = <&phy2>;
-+ pio-handle = <&ucc3pio>;
-+ };
-+
-+ enet1: ucc@3200 {
-+ tx-clock = <0x22>;
-+ rx-clock = <0x20>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x23>;
-+ reg = <0x3200 0x200>;
-+ device-id = <0x4>;
-+ model = "UCC";
-+ compatible = "ucc_geth";
-+ device_type = "network";
-+ phy-handle = <&phy3>;
-+ pio-handle = <&ucc4pio>;
-+ };
-+
-+ enet2: ucc@3000 {
-+ tx-clock = <0x18>;
-+ rx-clock = <0x17>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x21>;
-+ reg = <0x3000 0x200>;
-+ device-id = <0x2>;
-+ model = "UCC";
-+ compatible = "ucc_geth";
-+ device_type = "network";
-+ phy-handle = <&phy1>;
-+ pio-handle = <&ucc2pio>;
-+ };
-+
-+ spi@500 {
-+ mode = "cpu";
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x1>;
-+ reg = <0x500 0x40>;
-+ compatible = "fsl,spi";
-+ device_type = "spi";
-+ };
-+
-+ spi@4c0 {
-+ mode = "cpu";
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x2>;
-+ reg = <0x4c0 0x40>;
-+ compatible = "fsl,spi";
-+ device_type = "spi";
-+ };
-+
-+ muram@10000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
-+ ranges = <0x0 0x10000 0x4000>;
-+ device_type = "muram";
-+
-+ data-only@0 {
-+ compatible = "fsl,qe-muram-data",
-+ "fsl,cpm-muram-data";
-+ reg = <0x0 0x4000>;
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/powerpc/boot/rb333.c
-@@ -0,0 +1,86 @@
-+/*
-+ * The RouterBOARD platform -- for booting RB333 RouterBOARDs.
-+ *
-+ * Author: Alexandros C. Couloumbis <alex@ozo.com>
-+ * Author: Michael Guntsche <mike@it-loops.com>
-+ *
-+ * Copyright (c) 2010 Alexandros C. Couloumbis
-+ * Copyright (c) 2009 Michael Guntsche
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "types.h"
-+#include "io.h"
-+#include "stdio.h"
-+#include <libfdt.h>
-+
-+BSS_STACK(4*1024);
-+
-+u64 memsize64;
-+const void *fw_dtb;
-+
-+static void rb333_fixups(void)
-+{
-+ const u32 *reg, *timebase, *clock;
-+ int node, size;
-+ void *chosen;
-+ const char* bootargs;
-+
-+ dt_fixup_memory(0, memsize64);
-+
-+ /* Find the CPU timebase and clock frequencies. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "cpu", sizeof("cpu"));
-+ timebase = fdt_getprop(fw_dtb, node, "timebase-frequency", &size);
-+ clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
-+ dt_fixup_cpu_clocks(*clock, *timebase, 0);
-+
-+ /* Set the MAC addresses. */
-+ node = fdt_path_offset(fw_dtb, "/qe@e0100000/ucc@2200");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet0", (const u8 *)reg);
-+
-+ node = fdt_path_offset(fw_dtb, "/qe@e0100000/ucc@3200");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet1", (const u8 *)reg);
-+
-+ node = fdt_path_offset(fw_dtb, "/qe@e0100000/ucc@3000");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet2", (const u8 *)reg);
-+
-+ /* Fixup chosen
-+ * The bootloader reads the kernelparm segment and adds the content to
-+ * bootargs. This is needed to specify root and other boot flags.
-+ */
-+ chosen = finddevice("/chosen");
-+ node = fdt_path_offset(fw_dtb, "/chosen");
-+ bootargs = fdt_getprop(fw_dtb, node, "bootargs", &size);
-+ setprop_str(chosen, "bootargs", bootargs);
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+ unsigned long r6, unsigned long r7)
-+{
-+ const u32 *reg;
-+ int node, size;
-+
-+ fw_dtb = (const void *)r3;
-+
-+ /* Find the memory range. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "memory", sizeof("memory"));
-+ reg = fdt_getprop(fw_dtb, node, "reg", &size);
-+ memsize64 = reg[1];
-+
-+ /* Now we have the memory size; initialize the heap. */
-+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
-+
-+ /* Prepare the device tree and find the console. */
-+ fdt_init(_dtb_start);
-+ serial_console_init();
-+
-+ /* Remaining fixups... */
-+ platform_ops.fixups = rb333_fixups;
-+}
---- /dev/null
-+++ b/arch/powerpc/platforms/83xx/rbppc.c
-@@ -0,0 +1,388 @@
-+/*
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/root_dev.h>
-+#include <linux/initrd.h>
-+#include <linux/interrupt.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_device.h>
-+#include <linux/of_platform.h>
-+#include <linux/pci.h>
-+#include <asm/time.h>
-+#include <asm/ipic.h>
-+#include <asm/udbg.h>
-+#include <asm/qe.h>
-+#include <asm/qe_ic.h>
-+#include <sysdev/fsl_soc.h>
-+#include <sysdev/fsl_pci.h>
-+#include "mpc83xx.h"
-+
-+#define SYSCTL 0x100
-+#define SICRL 0x014
-+
-+#define GTCFR2 0x04
-+#define GTMDR4 0x22
-+#define GTRFR4 0x26
-+#define GTCNR4 0x2e
-+#define GTVER4 0x36
-+#define GTPSR4 0x3e
-+
-+#define GTCFR_BCM 0x40
-+#define GTCFR_STP4 0x20
-+#define GTCFR_RST4 0x10
-+#define GTCFR_STP3 0x02
-+#define GTCFR_RST3 0x01
-+
-+#define GTMDR_ORI 0x10
-+#define GTMDR_FRR 0x08
-+#define GTMDR_ICLK16 0x04
-+
-+extern int par_io_data_set(u8 port, u8 pin, u8 val);
-+extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-+ int assignment, int has_irq);
-+
-+static unsigned timer_freq;
-+static void *gtm;
-+
-+static int beeper_irq;
-+static unsigned beeper_gpio_pin[2];
-+
-+int rb333model = 0;
-+
-+irqreturn_t rbppc_timer_irq(int irq, void *ptr)
-+{
-+ static int toggle = 0;
-+
-+ par_io_data_set(beeper_gpio_pin[0], beeper_gpio_pin[1], toggle);
-+ toggle = !toggle;
-+
-+ /* ack interrupt */
-+ out_be16(gtm + GTVER4, 3);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+void rbppc_beep(unsigned freq)
-+{
-+ unsigned gtmdr;
-+
-+ if (freq > 5000) freq = 5000;
-+
-+ if (!gtm)
-+ return;
-+ if (!freq) {
-+ out_8(gtm + GTCFR2, GTCFR_STP4 | GTCFR_STP3);
-+ return;
-+ }
-+
-+ out_8(gtm + GTCFR2, GTCFR_RST4 | GTCFR_STP3);
-+ out_be16(gtm + GTPSR4, 255);
-+ gtmdr = GTMDR_FRR | GTMDR_ICLK16;
-+ if (beeper_irq != NO_IRQ) gtmdr |= GTMDR_ORI;
-+ out_be16(gtm + GTMDR4, gtmdr);
-+ out_be16(gtm + GTVER4, 3);
-+
-+ out_be16(gtm + GTRFR4, timer_freq / 16 / 256 / freq / 2);
-+ out_be16(gtm + GTCNR4, 0);
-+}
-+EXPORT_SYMBOL(rbppc_beep);
-+
-+static void __init rbppc_setup_arch(void)
-+{
-+ struct device_node *np;
-+
-+ np = of_find_node_by_type(NULL, "cpu");
-+ if (np) {
-+ const unsigned *fp = of_get_property(np, "clock-frequency", NULL);
-+ loops_per_jiffy = fp ? *fp / HZ : 0;
-+
-+ of_node_put(np);
-+ }
-+
-+ np = of_find_node_by_name(NULL, "serial");
-+ if (np) {
-+ timer_freq =
-+ *(unsigned *) of_get_property(np, "clock-frequency", NULL);
-+ of_node_put(np);
-+ }
-+
-+#ifdef CONFIG_PCI
-+ np = of_find_node_by_type(NULL, "pci");
-+ if (np) {
-+ mpc83xx_add_bridge(np);
-+ }
-+#endif
-+
-+if (rb333model) {
-+
-+#ifdef CONFIG_QUICC_ENGINE
-+ qe_reset();
-+
-+ if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
-+ par_io_init(np);
-+ of_node_put(np);
-+
-+ for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
-+ par_io_of_config(np);
-+ }
-+#endif
-+
-+} /* RB333 */
-+
-+}
-+
-+void __init rbppc_init_IRQ(void)
-+{
-+ struct device_node *np;
-+
-+ np = of_find_node_by_type(NULL, "ipic");
-+ if (np) {
-+ ipic_init(np, 0);
-+ ipic_set_default_priority();
-+ of_node_put(np);
-+ }
-+
-+if (rb333model) {
-+
-+#ifdef CONFIG_QUICC_ENGINE
-+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-+ if (!np) {
-+ np = of_find_node_by_type(NULL, "qeic");
-+ if (!np)
-+ return;
-+ }
-+ qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-+ of_node_put(np);
-+#endif /* CONFIG_QUICC_ENGINE */
-+
-+} /* RB333 */
-+
-+}
-+
-+static int __init rbppc_probe(void)
-+{
-+ char *model;
-+
-+ model = of_get_flat_dt_prop(of_get_flat_dt_root(), "model", NULL);
-+
-+ if (!model)
-+ return 0;
-+
-+ if (strcmp(model, "RB333") == 0) {
-+ rb333model = 1;
-+ return 1;
-+ }
-+
-+ if (strcmp(model, "RB600") == 0)
-+ return 1;
-+
-+ return 0;
-+}
-+
-+static void __init rbppc_beeper_init(struct device_node *beeper)
-+{
-+ struct resource res;
-+ struct device_node *gpio;
-+ const unsigned *pin;
-+ const unsigned *gpio_id;
-+
-+ if (of_address_to_resource(beeper, 0, &res)) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: No region specified\n", beeper->full_name);
-+ return;
-+ }
-+
-+ pin = of_get_property(beeper, "gpio", NULL);
-+ if (pin) {
-+ gpio = of_find_node_by_phandle(pin[0]);
-+
-+ if (!gpio) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: GPIO handle %x not found\n", beeper->full_name, pin[0]);
-+ return;
-+ }
-+
-+ gpio_id = of_get_property(gpio, "device-id", NULL);
-+ if (!gpio_id) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: No device-id specified in GPIO\n", beeper->full_name);
-+ return;
-+ }
-+
-+ beeper_gpio_pin[0] = *gpio_id;
-+ beeper_gpio_pin[1] = pin[1];
-+
-+ par_io_config_pin(*gpio_id, pin[1], 1, 0, 0, 0);
-+ } else {
-+ void *sysctl;
-+
-+ sysctl = ioremap_nocache(get_immrbase() + SYSCTL, 0x100);
-+ out_be32(sysctl + SICRL,
-+ in_be32(sysctl + SICRL) | (1 << (31 - 19)));
-+ iounmap(sysctl);
-+ }
-+
-+ gtm = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ beeper_irq = irq_of_parse_and_map(beeper, 0);
-+ if (beeper_irq != NO_IRQ) {
-+ int e = request_irq(beeper_irq, rbppc_timer_irq, 0, "beeper", NULL);
-+ if (e) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Request of beeper irq failed!\n", beeper->full_name);
-+ }
-+ }
-+}
-+
-+#define SBIT(x) (0x80000000 >> (x))
-+#define DBIT(x, y) ((y) << (32 - (((x % 16) + 1) * 2)))
-+
-+#define GPIO_DIR_RB333(x) ((x) + (0x1408 >> 2))
-+#define GPIO_DATA_RB333(x) ((x) + (0x1404 >> 2))
-+
-+#define SICRL_RB600(x) ((x) + (0x114 >> 2))
-+#define GPIO_DIR_RB600(x) ((x) + (0xc00 >> 2))
-+#define GPIO_DATA_RB600(x) ((x) + (0xc08 >> 2))
-+
-+static void rbppc_restart(char *cmd)
-+{
-+ __be32 __iomem *reg;
-+ unsigned rb_model;
-+ struct device_node *root;
-+ unsigned int size;
-+
-+ root = of_find_node_by_path("/");
-+ if (root) {
-+ const char *prop = (char *) of_get_property(root, "model", &size);
-+ rb_model = prop[sizeof("RB") - 1] - '0';
-+ of_node_put(root);
-+ switch (rb_model) {
-+ case 3:
-+ reg = ioremap(get_immrbase(), 0x2000);
-+ local_irq_disable();
-+ out_be32(GPIO_DIR_RB333(reg),
-+ (in_be32(GPIO_DIR_RB333(reg)) & ~DBIT(4, 3)) | DBIT(4, 1));
-+ out_be32(GPIO_DATA_RB333(reg), in_be32(GPIO_DATA_RB333(reg)) & ~SBIT(4));
-+ break;
-+ case 6:
-+ reg = ioremap(get_immrbase(), 0x1000);
-+ local_irq_disable();
-+ out_be32(SICRL_RB600(reg), in_be32(SICRL_RB600(reg)) & ~0x00800000);
-+ out_be32(GPIO_DIR_RB600(reg), in_be32(GPIO_DIR_RB600(reg)) | SBIT(2));
-+ out_be32(GPIO_DATA_RB600(reg), in_be32(GPIO_DATA_RB600(reg)) & ~SBIT(2));
-+ break;
-+ default:
-+ mpc83xx_restart(cmd);
-+ break;
-+ }
-+ }
-+ else mpc83xx_restart(cmd);
-+
-+ for (;;) ;
-+}
-+
-+static void rbppc_halt(void)
-+{
-+ while (1);
-+}
-+
-+static struct of_device_id rbppc_ids[] = {
-+ { .type = "soc", },
-+ { .compatible = "soc", },
-+ { .compatible = "simple-bus", },
-+ { .type = "qe", },
-+ { .compatible = "fsl,qe", },
-+ { .compatible = "gianfar", },
-+ { },
-+};
-+
-+static int __init rbppc_declare_of_platform_devices(void)
-+{
-+ struct device_node *np;
-+ unsigned idx;
-+
-+ of_platform_bus_probe(NULL, rbppc_ids, NULL);
-+
-+ np = of_find_node_by_type(NULL, "mdio");
-+ if (np) {
-+ unsigned len;
-+ unsigned *res;
-+ const unsigned *eres;
-+ struct device_node *ep;
-+
-+ ep = of_find_compatible_node(NULL, "network", "ucc_geth");
-+ if (ep) {
-+ eres = of_get_property(ep, "reg", &len);
-+ res = (unsigned *) of_get_property(np, "reg", &len);
-+ if (res && eres) {
-+ res[0] = eres[0] + 0x120;
-+ }
-+ }
-+ }
-+
-+ np = of_find_node_by_name(NULL, "nand");
-+ if (np) {
-+ of_platform_device_create(np, "nand", NULL);
-+ }
-+
-+ idx = 0;
-+ for_each_node_by_type(np, "rb,cf") {
-+ char dev_name[12];
-+ snprintf(dev_name, sizeof(dev_name), "cf.%u", idx);
-+ of_platform_device_create(np, dev_name, NULL);
-+ ++idx;
-+ }
-+
-+ np = of_find_node_by_name(NULL, "beeper");
-+ if (np) {
-+ rbppc_beeper_init(np);
-+ }
-+
-+ return 0;
-+}
-+machine_device_initcall(rb600, rbppc_declare_of_platform_devices);
-+
-+define_machine(rb600) {
-+ .name = "MikroTik RouterBOARD 333/600 series",
-+ .probe = rbppc_probe,
-+ .setup_arch = rbppc_setup_arch,
-+ .init_IRQ = rbppc_init_IRQ,
-+ .get_irq = ipic_get_irq,
-+ .restart = rbppc_restart,
-+ .halt = rbppc_halt,
-+ .time_init = mpc83xx_time_init,
-+ .calibrate_decr = generic_calibrate_decr,
-+};
-+
-+static void fixup_pcibridge(struct pci_dev *dev)
-+{
-+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
-+ /* let the kernel itself set right memory windows */
-+ pci_write_config_word(dev, PCI_MEMORY_BASE, 0);
-+ pci_write_config_word(dev, PCI_MEMORY_LIMIT, 0);
-+ pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0);
-+ pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
-+ pci_write_config_byte(dev, PCI_IO_BASE, 0);
-+ pci_write_config_byte(dev, PCI_IO_LIMIT, 4 << 4);
-+
-+ pci_write_config_byte(
-+ dev, PCI_COMMAND,
-+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
-+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
-+ }
-+}
-+
-+
-+static void fixup_rb604(struct pci_dev *dev)
-+{
-+ pci_write_config_byte(dev, 0xC0, 0x01);
-+}
-+
-+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_pcibridge)
-+DECLARE_PCI_FIXUP_HEADER(0x3388, 0x0021, fixup_rb604)
+++ /dev/null
---- a/arch/powerpc/kernel/Makefile
-+++ b/arch/powerpc/kernel/Makefile
-@@ -117,9 +117,11 @@ obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.
-
- obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
-
-+ifneq ($(CONFIG_RB_IOMAP),y)
- ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
- obj-y += iomap.o
- endif
-+endif
-
- obj64-$(CONFIG_PPC_TRANSACTIONAL_MEM) += tm.o
-
---- a/arch/powerpc/platforms/83xx/Makefile
-+++ b/arch/powerpc/platforms/83xx/Makefile
-@@ -7,6 +7,7 @@ obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mp
- obj-$(CONFIG_MPC830x_RDB) += mpc830x_rdb.o
- obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o
- obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o
-+obj-$(CONFIG_RB_PPC) += rbppc.o
- obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
- obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
- obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o
---- a/arch/powerpc/platforms/Kconfig
-+++ b/arch/powerpc/platforms/Kconfig
-@@ -191,6 +191,10 @@ config PPC_INDIRECT_MMIO
- config PPC_IO_WORKAROUNDS
- bool
-
-+config RB_IOMAP
-+ bool
-+ default y if RB_PPC
-+
- source "drivers/cpufreq/Kconfig"
-
- menu "CPU Frequency drivers"
---- a/arch/powerpc/sysdev/Makefile
-+++ b/arch/powerpc/sysdev/Makefile
-@@ -71,3 +71,6 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -
- obj-$(CONFIG_PPC_XICS) += xics/
-
- obj-$(CONFIG_GE_FPGA) += ge/
-+
-+obj-$(CONFIG_RB_IOMAP) += rb_iomap.o
-+
---- /dev/null
-+++ b/arch/powerpc/sysdev/rb_iomap.c
-@@ -0,0 +1,204 @@
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+#include <linux/mm.h>
-+#include <asm/io.h>
-+
-+#define LOCALBUS_START 0x40000000
-+#define LOCALBUS_MASK 0x007fffff
-+#define LOCALBUS_REGMASK 0x001fffff
-+
-+static void __iomem *localbus_base;
-+
-+static inline int is_localbus(void __iomem *addr)
-+{
-+ return ((unsigned) addr & ~LOCALBUS_MASK) == LOCALBUS_START;
-+}
-+
-+static inline unsigned localbus_regoff(unsigned reg) {
-+ return (reg << 16) | (((reg ^ 8) & 8) << 17);
-+}
-+
-+static inline void __iomem *localbus_addr(void __iomem *addr)
-+{
-+ return localbus_base
-+ + ((unsigned) addr & LOCALBUS_MASK & ~LOCALBUS_REGMASK)
-+ + localbus_regoff((unsigned) addr & LOCALBUS_REGMASK);
-+}
-+
-+unsigned int ioread8(void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ return in_be16(localbus_addr(addr)) >> 8;
-+ return readb(addr);
-+}
-+EXPORT_SYMBOL(ioread8);
-+
-+unsigned int ioread16(void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ return le16_to_cpu(in_be16(localbus_addr(addr)));
-+ return readw(addr);
-+}
-+EXPORT_SYMBOL(ioread16);
-+
-+unsigned int ioread16be(void __iomem *addr)
-+{
-+ return in_be16(addr);
-+}
-+EXPORT_SYMBOL(ioread16be);
-+
-+unsigned int ioread32(void __iomem *addr)
-+{
-+ return readl(addr);
-+}
-+EXPORT_SYMBOL(ioread32);
-+
-+unsigned int ioread32be(void __iomem *addr)
-+{
-+ return in_be32(addr);
-+}
-+EXPORT_SYMBOL(ioread32be);
-+
-+void iowrite8(u8 val, void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ out_be16(localbus_addr(addr), ((u16) val) << 8);
-+ else
-+ writeb(val, addr);
-+}
-+EXPORT_SYMBOL(iowrite8);
-+
-+void iowrite16(u16 val, void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ out_be16(localbus_addr(addr), cpu_to_le16(val));
-+ else
-+ writew(val, addr);
-+}
-+EXPORT_SYMBOL(iowrite16);
-+
-+void iowrite16be(u16 val, void __iomem *addr)
-+{
-+ out_be16(addr, val);
-+}
-+EXPORT_SYMBOL(iowrite16be);
-+
-+void iowrite32(u32 val, void __iomem *addr)
-+{
-+ writel(val, addr);
-+}
-+EXPORT_SYMBOL(iowrite32);
-+
-+void iowrite32be(u32 val, void __iomem *addr)
-+{
-+ out_be32(addr, val);
-+}
-+EXPORT_SYMBOL(iowrite32be);
-+
-+void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ u8 *buf = dst;
-+
-+ for (i = 0; i < count; ++i) {
-+ *buf++ = in_be16(laddr) >> 8;
-+ }
-+ } else {
-+ _insb((u8 __iomem *) addr, dst, count);
-+ }
-+}
-+EXPORT_SYMBOL(ioread8_rep);
-+
-+void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ u16 *buf = dst;
-+
-+ for (i = 0; i < count; ++i) {
-+ *buf++ = in_be16(laddr);
-+ }
-+ } else {
-+ _insw_ns((u16 __iomem *) addr, dst, count);
-+ }
-+}
-+EXPORT_SYMBOL(ioread16_rep);
-+
-+void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
-+{
-+ _insl_ns((u32 __iomem *) addr, dst, count);
-+}
-+EXPORT_SYMBOL(ioread32_rep);
-+
-+void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ const u8 *buf = src;
-+
-+ for (i = 0; i < count; ++i) {
-+ out_be16(laddr, ((u16) *buf++) << 8);
-+ }
-+ } else {
-+ _outsb((u8 __iomem *) addr, src, count);
-+ }
-+}
-+EXPORT_SYMBOL(iowrite8_rep);
-+
-+void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ const u16 *buf = src;
-+
-+ for (i = 0; i < count; ++i) {
-+ out_be16(laddr, *buf++);
-+ }
-+ } else {
-+ _outsw_ns((u16 __iomem *) addr, src, count);
-+ }
-+}
-+EXPORT_SYMBOL(iowrite16_rep);
-+
-+void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
-+{
-+ _outsl_ns((u32 __iomem *) addr, src, count);
-+}
-+EXPORT_SYMBOL(iowrite32_rep);
-+
-+void __iomem *ioport_map(unsigned long port, unsigned int len)
-+{
-+ return (void __iomem *) (port + _IO_BASE);
-+}
-+EXPORT_SYMBOL(ioport_unmap);
-+
-+void ioport_unmap(void __iomem *addr)
-+{
-+ /* Nothing to do */
-+}
-+EXPORT_SYMBOL(ioport_map);
-+
-+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-+{
-+ /* Nothing to do */
-+}
-+EXPORT_SYMBOL(pci_iounmap);
-+
-+void __iomem *localbus_map(unsigned long addr, unsigned int len)
-+{
-+ if (!localbus_base)
-+ localbus_base = ioremap(addr & ~LOCALBUS_MASK,
-+ LOCALBUS_MASK + 1);
-+ return (void *) (LOCALBUS_START + (addr & LOCALBUS_MASK));
-+}
-+EXPORT_SYMBOL(localbus_map);
-+
-+void localbus_unmap(void __iomem *addr)
-+{
-+}
-+EXPORT_SYMBOL(localbus_unmap);
---- a/arch/powerpc/platforms/83xx/Kconfig
-+++ b/arch/powerpc/platforms/83xx/Kconfig
-@@ -44,6 +44,7 @@ config RB_PPC
- select QUICC_ENGINE
- select PPC_MPC832x
- select PPC_MPC834x
-+ select RB_IOMAP
- help
- This option enables support for MikroTik RouterBOARD 333/600 series boards.
-
+++ /dev/null
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -938,5 +938,12 @@ config PATA_LEGACY
-
- If unsure, say N.
-
-+config PATA_RB_PPC
-+ tristate "MikroTik RB600 PATA support"
-+ depends on RB_PPC
-+ help
-+ This option enables support for PATA devices on MikroTik RouterBOARD
-+ 600 series boards.
-+
- endif # ATA_SFF
- endif # ATA
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -92,6 +92,7 @@ obj-$(CONFIG_PATA_PALMLD) += pata_palmld
- obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
- obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
-+obj-$(CONFIG_PATA_RB_PPC) += pata_rbppc_cf.o
- obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
- obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
-
---- /dev/null
-+++ b/drivers/ata/pata_rbppc_cf.c
-@@ -0,0 +1,699 @@
-+/*
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <scsi/scsi_host.h>
-+#include <linux/libata.h>
-+#include <linux/of_platform.h>
-+#include <linux/ata_platform.h>
-+#include <linux/slab.h>
-+
-+#define DEBUG_UPM 0
-+
-+#define DRV_NAME "pata_rbppc_cf"
-+#define DRV_VERSION "0.0.2"
-+
-+#define DEV2SEL_OFFSET 0x00100000
-+
-+#define IMMR_LBCFG_OFFSET 0x00005000
-+#define IMMR_LBCFG_SIZE 0x00001000
-+
-+#define LOCAL_BUS_MCMR 0x00000078
-+#define MxMR_OP_MASK 0x30000000
-+#define MxMR_OP_NORMAL 0x00000000
-+#define MxMR_OP_WRITE 0x10000000
-+#define MxMR_OP_READ 0x20000000
-+#define MxMR_OP_RUN 0x30000000
-+#define MxMR_LUPWAIT_LOW 0x08000000
-+#define MxMR_LUPWAIT_HIGH 0x00000000
-+#define MxMR_LUPWAIT_ENABLE 0x00040000
-+#define MxMR_RLF_MASK 0x0003c000
-+#define MxMR_RLF_SHIFT 14
-+#define MxMR_WLF_MASK 0x00003c00
-+#define MxMR_WLF_SHIFT 10
-+#define MxMR_MAD_MASK 0x0000003f
-+#define LOCAL_BUS_MDR 0x00000088
-+#define LOCAL_BUS_LCRR 0x000000D4
-+#define LCRR_CLKDIV_MASK 0x0000000f
-+
-+#define LOOP_SIZE 4
-+
-+#define UPM_READ_SINGLE_OFFSET 0x00
-+#define UPM_WRITE_SINGLE_OFFSET 0x18
-+#define UPM_DATA_SIZE 0x40
-+
-+#define LBT_CPUIN_MIN 0
-+#define LBT_CPUOUT_MIN 1
-+#define LBT_CPUOUT_MAX 2
-+#define LBT_EXTDEL_MIN 3
-+#define LBT_EXTDEL_MAX 4
-+#define LBT_SIZE 5
-+
-+/* UPM machine configuration bits */
-+#define N_BASE 0x00f00000
-+#define N_CS 0xf0000000
-+#define N_CS_H1 0xc0000000
-+#define N_CS_H2 0x30000000
-+#define N_WE 0x0f000000
-+#define N_WE_H1 0x0c000000
-+#define N_WE_H2 0x03000000
-+#define N_OE 0x00030000
-+#define N_OE_H1 0x00020000
-+#define N_OE_H2 0x00010000
-+#define WAEN 0x00001000
-+#define REDO_2 0x00000100
-+#define REDO_3 0x00000200
-+#define REDO_4 0x00000300
-+#define LOOP 0x00000080
-+#define NA 0x00000008
-+#define UTA 0x00000004
-+#define LAST 0x00000001
-+
-+#define REDO_VAL(mult) (REDO_2 * ((mult) - 1))
-+#define REDO_MAX_MULT 4
-+
-+#define READ_BASE (N_BASE | N_WE)
-+#define WRITE_BASE (N_BASE | N_OE)
-+#define EMPTY (N_BASE | N_CS | N_OE | N_WE | LAST)
-+
-+#define EOF_UPM_SETTINGS 0
-+#define ANOTHER_TIMING 1
-+
-+#define OA_CPUIN_MIN 0x01
-+#define OA_CPUOUT_MAX 0x02
-+#define OD_CPUOUT_MIN 0x04
-+#define OA_CPUOUT_DELTA 0x06
-+#define OA_EXTDEL_MAX 0x08
-+#define OD_EXTDEL_MIN 0x10
-+#define OA_EXTDEL_DELTA 0x18
-+#define O_MIN_CYCLE_TIME 0x20
-+#define O_MINUS_PREV 0x40
-+#define O_HALF_CYCLE 0x80
-+
-+extern void __iomem *localbus_map(unsigned long addr, unsigned int len);
-+extern void localbus_unmap(void __iomem *addr);
-+
-+struct rbppc_cf_info {
-+ unsigned lbcfg_addr;
-+ unsigned clk_time_ps;
-+ int cur_mode;
-+ u32 lb_timings[LBT_SIZE];
-+};
-+static struct rbppc_cf_info *rbinfo = NULL;
-+
-+struct upm_setting {
-+ unsigned value;
-+ unsigned ns[7];
-+ unsigned clk_minus;
-+ unsigned group_size;
-+ unsigned options;
-+};
-+
-+static const struct upm_setting cfUpmReadSingle[] = {
-+ { READ_BASE | N_OE,
-+ /* t1 - ADDR setup time */
-+ { 70, 50, 30, 30, 25, 15, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { READ_BASE | N_OE_H1,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { READ_BASE,
-+ /* t2 - OE0 time */
-+ { 290, 290, 290, 80, 70, 65, 55 }, 0, 2, (OA_CPUOUT_MAX |
-+ OA_CPUIN_MIN) },
-+ { READ_BASE | WAEN,
-+ { 1, 1, 1, 1, 1, 0, 0 }, 0, 0, 0 },
-+ { READ_BASE | UTA,
-+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
-+ { READ_BASE | N_OE,
-+ /* t9 - ADDR hold time */
-+ { 20, 15, 10, 10, 10, 10, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OD_EXTDEL_MIN) },
-+ { READ_BASE | N_OE | N_CS_H2,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { READ_BASE | N_OE | N_CS,
-+ /* t6Z -IORD data tristate */
-+ { 30, 30, 30, 30, 30, 20, 20 }, 1, 1, O_MINUS_PREV },
-+ { ANOTHER_TIMING,
-+ /* t2i -IORD recovery time */
-+ { 0, 0, 0, 70, 25, 25, 20 }, 2, 0, 0 },
-+ { ANOTHER_TIMING,
-+ /* CS 0 -> 1 MAX */
-+ { 0, 0, 0, 0, 0, 0, 0 }, 1, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { READ_BASE | N_OE | N_CS | LAST,
-+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
-+ { EOF_UPM_SETTINGS,
-+ /* min total cycle time - includes turnaround and ALE cycle */
-+ { 600, 383, 240, 180, 120, 100, 80 }, 2, 0, O_MIN_CYCLE_TIME },
-+};
-+
-+static const struct upm_setting cfUpmWriteSingle[] = {
-+ { WRITE_BASE | N_WE,
-+ /* t1 - ADDR setup time */
-+ { 70, 50, 30, 30, 25, 15, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { WRITE_BASE | N_WE_H1,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { WRITE_BASE,
-+ /* t2 - WE0 time */
-+ { 290, 290, 290, 80, 70, 65, 55 }, 0, 1, OA_CPUOUT_DELTA },
-+ { WRITE_BASE | WAEN,
-+ { 1, 1, 1, 1, 1, 0, 0 }, 0, 0, 0 },
-+ { WRITE_BASE | N_WE,
-+ /* t9 - ADDR hold time */
-+ { 20, 15, 10, 10, 10, 10, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OD_EXTDEL_MIN) },
-+ { WRITE_BASE | N_WE | N_CS_H2,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { WRITE_BASE | N_WE | N_CS,
-+ /* t4 - DATA hold time */
-+ { 30, 20, 15, 10, 10, 10, 10 }, 0, 1, O_MINUS_PREV },
-+ { ANOTHER_TIMING,
-+ /* t2i -IOWR recovery time */
-+ { 0, 0, 0, 70, 25, 25, 20 }, 1, 0, 0 },
-+ { ANOTHER_TIMING,
-+ /* CS 0 -> 1 MAX */
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { WRITE_BASE | N_WE | N_CS | UTA | LAST,
-+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
-+ /* min total cycle time - includes ALE cycle */
-+ { EOF_UPM_SETTINGS,
-+ { 600, 383, 240, 180, 120, 100, 80 }, 1, 0, O_MIN_CYCLE_TIME },
-+};
-+
-+static u8 rbppc_cf_check_status(struct ata_port *ap) {
-+ u8 val = ioread8(ap->ioaddr.status_addr);
-+ if (val == 0xF9)
-+ val = 0x7F;
-+ return val;
-+}
-+
-+static u8 rbppc_cf_check_altstatus(struct ata_port *ap) {
-+ u8 val = ioread8(ap->ioaddr.altstatus_addr);
-+ if (val == 0xF9)
-+ val = 0x7F;
-+ return val;
-+}
-+
-+static void rbppc_cf_dummy_noret(struct ata_port *ap) { }
-+static int rbppc_cf_dummy_ret0(struct ata_port *ap) { return 0; }
-+
-+static int ps2clk(int ps, unsigned clk_time_ps) {
-+ int psMaxOver;
-+ if (ps <= 0) return 0;
-+
-+ /* round down if <= 2% over clk border, but no more than 1/4 clk cycle */
-+ psMaxOver = ps * 2 / 100;
-+ if (4 * psMaxOver > clk_time_ps) {
-+ psMaxOver = clk_time_ps / 4;
-+ }
-+ return (ps + clk_time_ps - 1 - psMaxOver) / clk_time_ps;
-+}
-+
-+static int upm_gen_ps_table(const struct upm_setting *upm,
-+ int mode, struct rbppc_cf_info *info,
-+ int *psFinal) {
-+ int uidx;
-+ int lastUpmValIdx = 0;
-+ int group_start_idx = -1;
-+ int group_left_num = -1;
-+ int clk_time_ps = info->clk_time_ps;
-+
-+ for (uidx = 0; upm[uidx].value != EOF_UPM_SETTINGS; ++uidx) {
-+ const struct upm_setting *us = upm + uidx;
-+ unsigned opt = us->options;
-+ int ps = us->ns[mode] * 1000 - us->clk_minus * clk_time_ps;
-+
-+ if (opt & OA_CPUIN_MIN) ps += info->lb_timings[LBT_CPUIN_MIN];
-+ if (opt & OD_CPUOUT_MIN) ps -= info->lb_timings[LBT_CPUOUT_MIN];
-+ if (opt & OA_CPUOUT_MAX) ps += info->lb_timings[LBT_CPUOUT_MAX];
-+ if (opt & OD_EXTDEL_MIN) ps -= info->lb_timings[LBT_EXTDEL_MIN];
-+ if (opt & OA_EXTDEL_MAX) ps += info->lb_timings[LBT_EXTDEL_MAX];
-+
-+ if (us->value == ANOTHER_TIMING) {
-+ /* use longest timing from alternatives */
-+ if (psFinal[lastUpmValIdx] < ps) {
-+ psFinal[lastUpmValIdx] = ps;
-+ }
-+ ps = 0;
-+ }
-+ else {
-+ if (us->group_size) {
-+ group_start_idx = uidx;
-+ group_left_num = us->group_size;
-+ }
-+ else if (group_left_num > 0) {
-+ /* group time is divided on all group members */
-+ int clk = ps2clk(ps, clk_time_ps);
-+ psFinal[group_start_idx] -= clk * clk_time_ps;
-+ --group_left_num;
-+ }
-+ if ((opt & O_MINUS_PREV) && lastUpmValIdx > 0) {
-+ int clk = ps2clk(psFinal[lastUpmValIdx],
-+ clk_time_ps);
-+ ps -= clk * clk_time_ps;
-+ }
-+ lastUpmValIdx = uidx;
-+ }
-+ psFinal[uidx] = ps;
-+ }
-+ return uidx;
-+}
-+
-+static int free_half(int ps, int clk, int clk_time_ps) {
-+ if (clk < 2) return 0;
-+ return (clk * clk_time_ps - ps) * 2 >= clk_time_ps;
-+}
-+
-+static void upm_gen_clk_table(const struct upm_setting *upm,
-+ int mode, int clk_time_ps,
-+ int max_uidx, const int *psFinal, int *clkFinal) {
-+ int clk_cycle_time;
-+ int clk_total;
-+ int uidx;
-+
-+ /* convert picoseconds to clocks */
-+ clk_total = 0;
-+ for (uidx = 0; uidx < max_uidx; ++uidx) {
-+ int clk = ps2clk(psFinal[uidx], clk_time_ps);
-+ clkFinal[uidx] = clk;
-+ clk_total += clk;
-+ }
-+
-+ /* check possibility of half cycle usage */
-+ for (uidx = 1; uidx < max_uidx - 1; ++uidx) {
-+ if ((upm[uidx].options & O_HALF_CYCLE) &&
-+ free_half(psFinal[uidx - 1], clkFinal[uidx - 1],
-+ clk_time_ps) &&
-+ free_half(psFinal[uidx + 1], clkFinal[uidx + 1],
-+ clk_time_ps)) {
-+ ++clkFinal[uidx];
-+ --clkFinal[uidx - 1];
-+ --clkFinal[uidx + 1];
-+ }
-+ }
-+
-+ if ((upm[max_uidx].options & O_MIN_CYCLE_TIME) == 0) return;
-+
-+ /* check cycle time, adjust timings if needed */
-+ clk_cycle_time = (ps2clk(upm[max_uidx].ns[mode] * 1000, clk_time_ps) -
-+ upm[max_uidx].clk_minus);
-+ uidx = 0;
-+ while (clk_total < clk_cycle_time) {
-+ /* extend all timings in round-robin to match cycle time */
-+ if (clkFinal[uidx]) {
-+#if DEBUG_UPM
-+ printk(KERN_INFO "extending %u by 1 clk\n", uidx);
-+#endif
-+ ++clkFinal[uidx];
-+ ++clk_total;
-+ }
-+ ++uidx;
-+ if (uidx == max_uidx) uidx = 0;
-+ }
-+}
-+
-+static void add_data_val(unsigned val, int *clkLeft, int maxClk,
-+ unsigned *data, int *dataIdx) {
-+ if (*clkLeft == 0) return;
-+
-+ if (maxClk == 0 && *clkLeft >= LOOP_SIZE * 2) {
-+ int times;
-+ int times1;
-+ int times2;
-+
-+ times = *clkLeft / LOOP_SIZE;
-+ if (times > REDO_MAX_MULT * 2) times = REDO_MAX_MULT * 2;
-+ times1 = times / 2;
-+ times2 = times - times1;
-+
-+ val |= LOOP;
-+ data[*dataIdx] = val | REDO_VAL(times1);
-+ ++(*dataIdx);
-+ data[*dataIdx] = val | REDO_VAL(times2);
-+ ++(*dataIdx);
-+
-+ *clkLeft -= times * LOOP_SIZE;
-+ return;
-+ }
-+
-+ if (maxClk < 1 || maxClk > REDO_MAX_MULT) maxClk = REDO_MAX_MULT;
-+ if (*clkLeft < maxClk) maxClk = *clkLeft;
-+
-+ *clkLeft -= maxClk;
-+ val |= REDO_VAL(maxClk);
-+
-+ data[*dataIdx] = val;
-+ ++(*dataIdx);
-+}
-+
-+static int upm_gen_final_data(const struct upm_setting *upm,
-+ int max_uidx, int *clkFinal, unsigned *data) {
-+ int dataIdx;
-+ int uidx;
-+
-+ dataIdx = 0;
-+ for (uidx = 0; uidx < max_uidx; ++uidx) {
-+ int clk = clkFinal[uidx];
-+ while (clk > 0) {
-+ add_data_val(upm[uidx].value, &clk, 0,
-+ data, &dataIdx);
-+ }
-+ }
-+ return dataIdx;
-+}
-+
-+static int conv_upm_table(const struct upm_setting *upm,
-+ int mode, struct rbppc_cf_info *info,
-+ unsigned *data) {
-+#if DEBUG_UPM
-+ int uidx;
-+#endif
-+ int psFinal[32];
-+ int clkFinal[32];
-+ int max_uidx;
-+ int data_len;
-+
-+ max_uidx = upm_gen_ps_table(upm, mode, info, psFinal);
-+
-+ upm_gen_clk_table(upm, mode, info->clk_time_ps, max_uidx,
-+ psFinal, clkFinal);
-+
-+#if DEBUG_UPM
-+ /* dump out debug info */
-+ for (uidx = 0; uidx < max_uidx; ++uidx) {
-+ if (clkFinal[uidx]) {
-+ printk(KERN_INFO "idx %d val %08x clk %d ps %d\n",
-+ uidx, upm[uidx].value,
-+ clkFinal[uidx], psFinal[uidx]);
-+ }
-+ }
-+#endif
-+
-+ data_len = upm_gen_final_data(upm, max_uidx, clkFinal, data);
-+
-+#if DEBUG_UPM
-+ for (uidx = 0; uidx < data_len; ++uidx) {
-+ printk(KERN_INFO "cf UPM x result: idx %d val %08x\n",
-+ uidx, data[uidx]);
-+ }
-+#endif
-+ return 0;
-+}
-+
-+static int gen_upm_data(int mode, struct rbppc_cf_info *info, unsigned *data) {
-+ int i;
-+
-+ for (i = 0; i < UPM_DATA_SIZE; ++i) {
-+ data[i] = EMPTY;
-+ }
-+
-+ if (conv_upm_table(cfUpmReadSingle, mode, info, data + UPM_READ_SINGLE_OFFSET)) {
-+ return -1;
-+ }
-+ if (conv_upm_table(cfUpmWriteSingle, mode, info, data + UPM_WRITE_SINGLE_OFFSET)) {
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+static void rbppc_cf_program_upm(void *upmMemAddr, volatile void *lbcfg_mxmr, volatile void *lbcfg_mdr, const unsigned *upmData, unsigned offset, unsigned len) {
-+ unsigned i;
-+ unsigned mxmr;
-+
-+ mxmr = in_be32(lbcfg_mxmr);
-+ mxmr &= ~(MxMR_OP_MASK | MxMR_MAD_MASK);
-+ mxmr |= (MxMR_OP_WRITE | offset);
-+ out_be32(lbcfg_mxmr, mxmr);
-+ in_be32(lbcfg_mxmr); /* flush MxMR write */
-+
-+ for (i = 0; i < len; ++i) {
-+ int to;
-+ unsigned data = upmData[i + offset];
-+ out_be32(lbcfg_mdr, data);
-+ in_be32(lbcfg_mdr); /* flush MDR write */
-+
-+ iowrite8(1, upmMemAddr); /* dummy write to any CF addr */
-+
-+ /* wait for dummy write to complete */
-+ for (to = 10000; to >= 0; --to) {
-+ mxmr = in_be32(lbcfg_mxmr);
-+ if (((mxmr ^ (i + 1)) & MxMR_MAD_MASK) == 0) {
-+ break;
-+ }
-+ if (to == 0) {
-+ printk(KERN_ERR "rbppc_cf_program_upm: UPMx program error at 0x%x: Timeout\n", i);
-+ }
-+ }
-+ }
-+ mxmr &= ~(MxMR_OP_MASK | MxMR_RLF_MASK | MxMR_WLF_MASK);
-+ mxmr |= (MxMR_OP_NORMAL | (LOOP_SIZE << MxMR_RLF_SHIFT) | (LOOP_SIZE << MxMR_WLF_SHIFT));
-+ out_be32(lbcfg_mxmr, mxmr);
-+}
-+
-+static int rbppc_cf_update_piomode(struct ata_port *ap, int mode) {
-+ struct rbppc_cf_info *info = (struct rbppc_cf_info *)ap->host->private_data;
-+ void *lbcfgBase;
-+ unsigned upmData[UPM_DATA_SIZE];
-+
-+ if (gen_upm_data(mode, info, upmData)) {
-+ return -1;
-+ }
-+
-+ lbcfgBase = ioremap_nocache(info->lbcfg_addr, IMMR_LBCFG_SIZE);
-+
-+ rbppc_cf_program_upm(ap->ioaddr.cmd_addr, ((char *)lbcfgBase) + LOCAL_BUS_MCMR, ((char *)lbcfgBase) + LOCAL_BUS_MDR, upmData, 0, UPM_DATA_SIZE);
-+ iounmap(lbcfgBase);
-+ return 0;
-+}
-+
-+static void rbppc_cf_set_piomode(struct ata_port *ap, struct ata_device *adev)
-+{
-+ struct rbppc_cf_info *info = (struct rbppc_cf_info *)ap->host->private_data;
-+ int mode = adev->pio_mode - XFER_PIO_0;
-+
-+ DPRINTK("rbppc_cf_set_piomode: PIO %d\n", mode);
-+ if (mode < 0) mode = 0;
-+ if (mode > 6) mode = 6;
-+
-+ if (info->cur_mode < 0 || info->cur_mode > mode) {
-+ if (rbppc_cf_update_piomode(ap, mode) == 0) {
-+ printk(KERN_INFO "rbppc_cf_set_piomode: PIO mode changed to %d\n", mode);
-+ info->cur_mode = mode;
-+ }
-+ }
-+}
-+
-+static struct scsi_host_template rbppc_cf_sht = {
-+ ATA_BASE_SHT(DRV_NAME),
-+};
-+
-+static struct ata_port_operations rbppc_cf_port_ops = {
-+ .inherits = &ata_bmdma_port_ops,
-+
-+ .sff_check_status = rbppc_cf_check_status,
-+ .sff_check_altstatus = rbppc_cf_check_altstatus,
-+
-+ .set_piomode = rbppc_cf_set_piomode,
-+
-+ .port_start = rbppc_cf_dummy_ret0,
-+
-+ .sff_irq_clear = rbppc_cf_dummy_noret,
-+};
-+
-+static int rbppc_cf_init_info(struct platform_device *pdev, struct rbppc_cf_info *info) {
-+ struct device_node *np;
-+ struct resource res;
-+ const u32 *u32ptr;
-+ void *lbcfgBase;
-+ void *lbcfg_lcrr;
-+ unsigned lbc_clk_khz;
-+ unsigned lbc_extra_divider = 1;
-+ unsigned ccb_freq_hz;
-+ unsigned lb_div;
-+
-+ u32ptr = of_get_property(pdev->dev.of_node, "lbc_extra_divider", NULL);
-+ if (u32ptr && *u32ptr) {
-+ lbc_extra_divider = *u32ptr;
-+#if DEBUG_UPM
-+ printk(KERN_INFO "rbppc_cf_init_info: LBC extra divider %u\n",
-+ lbc_extra_divider);
-+#endif
-+ }
-+
-+ np = of_find_node_by_type(NULL, "serial");
-+ if (!np) {
-+ printk(KERN_ERR "rbppc_cf_init_info: No serial node found\n");
-+ return -1;
-+ }
-+ u32ptr = of_get_property(np, "clock-frequency", NULL);
-+ if (u32ptr == 0 || *u32ptr == 0) {
-+ printk(KERN_ERR "rbppc_cf_init_info: Serial does not have clock-frequency\n");
-+ of_node_put(np);
-+ return -1;
-+ }
-+ ccb_freq_hz = *u32ptr;
-+ of_node_put(np);
-+
-+ np = of_find_node_by_type(NULL, "soc");
-+ if (!np) {
-+ printk(KERN_ERR "rbppc_cf_init_info: No soc node found\n");
-+ return -1;
-+ }
-+ if (of_address_to_resource(np, 0, &res)) {
-+ printk(KERN_ERR "rbppc_cf_init_info: soc does not have resource\n");
-+ of_node_put(np);
-+ return -1;
-+ }
-+ info->lbcfg_addr = res.start + IMMR_LBCFG_OFFSET;
-+ of_node_put(np);
-+
-+ lbcfgBase = ioremap_nocache(info->lbcfg_addr, IMMR_LBCFG_SIZE);
-+ lbcfg_lcrr = ((char*)lbcfgBase) + LOCAL_BUS_LCRR;
-+ lb_div = (in_be32(lbcfg_lcrr) & LCRR_CLKDIV_MASK) * lbc_extra_divider;
-+ iounmap(lbcfgBase);
-+
-+ lbc_clk_khz = ccb_freq_hz / (1000 * lb_div);
-+ info->clk_time_ps = 1000000000 / lbc_clk_khz;
-+ printk(KERN_INFO "rbppc_cf_init_info: Using Local-Bus clock %u kHz %u ps\n",
-+ lbc_clk_khz, info->clk_time_ps);
-+
-+ u32ptr = of_get_property(pdev->dev.of_node, "lb-timings", NULL);
-+ if (u32ptr) {
-+ memcpy(info->lb_timings, u32ptr, LBT_SIZE * sizeof(*u32ptr));
-+#if DEBUG_UPM
-+ printk(KERN_INFO "rbppc_cf_init_info: Got LB timings <%u %u %u %u %u>\n",
-+ u32ptr[0], u32ptr[1], u32ptr[2], u32ptr[3], u32ptr[4]);
-+#endif
-+ }
-+ info->cur_mode = -1;
-+ return 0;
-+}
-+
-+static int rbppc_cf_probe(struct platform_device *pdev)
-+{
-+ struct ata_host *host;
-+ struct ata_port *ap;
-+ struct rbppc_cf_info *info = NULL;
-+ struct resource res;
-+ void *baddr;
-+ const u32 *u32ptr;
-+ int irq_level = 0;
-+ int err = -ENOMEM;
-+
-+ printk(KERN_INFO "rbppc_cf_probe: MikroTik RouterBOARD 600 series Compact Flash PATA driver, version " DRV_VERSION "\n");
-+
-+ if (rbinfo == NULL) {
-+ info = kmalloc(sizeof(*info), GFP_KERNEL);
-+ if (info == NULL) {
-+ printk(KERN_ERR "rbppc_cf_probe: Out of memory\n");
-+ goto err_info;
-+ }
-+ memset(info, 0, sizeof(*info));
-+
-+ if (rbppc_cf_init_info(pdev, info)) {
-+ goto err_info;
-+ }
-+ rbinfo = info;
-+ }
-+
-+ u32ptr = of_get_property(pdev->dev.of_node, "interrupt-at-level", NULL);
-+ if (u32ptr) {
-+ irq_level = *u32ptr;
-+ printk(KERN_INFO "rbppc_cf_probe: IRQ level %u\n", irq_level);
-+ }
-+
-+ if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
-+ printk(KERN_ERR "rbppc_cf_probe: No reg property found\n");
-+ goto err_info;
-+ }
-+
-+ host = ata_host_alloc(&pdev->dev, 1);
-+ if (!host)
-+ goto err_info;
-+
-+ baddr = localbus_map(res.start, res.end - res.start + 1);
-+ host->iomap = baddr;
-+ host->private_data = rbinfo;
-+
-+ ap = host->ports[0];
-+ ap->ops = &rbppc_cf_port_ops;
-+ ap->pio_mask = 0x7F; /* PIO modes 0-6 */
-+ ap->mwdma_mask = 0;
-+
-+ ap->ioaddr.cmd_addr = baddr;
-+ ata_sff_std_ports(&ap->ioaddr);
-+ ap->ioaddr.ctl_addr = ap->ioaddr.cmd_addr + 14;
-+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
-+ ap->ioaddr.bmdma_addr = 0;
-+
-+ err = ata_host_activate(
-+ host,
-+ irq_of_parse_and_map(pdev->dev.of_node, 0), ata_sff_interrupt,
-+ irq_level ? IRQF_TRIGGER_HIGH : IRQF_TRIGGER_LOW,
-+ &rbppc_cf_sht);
-+ if (!err) return 0;
-+
-+ localbus_unmap(baddr);
-+err_info:
-+ if (info) {
-+ kfree(info);
-+ rbinfo = NULL;
-+ }
-+ return err;
-+}
-+
-+static int rbppc_cf_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct ata_host *host = dev_get_drvdata(dev);
-+
-+ if (host == NULL) return -1;
-+
-+ ata_host_detach(host);
-+ return 0;
-+}
-+
-+static struct of_device_id rbppc_cf_ids[] = {
-+ { .name = "cf", },
-+ { },
-+};
-+
-+static struct platform_driver rbppc_cf_driver = {
-+ .probe = rbppc_cf_probe,
-+ .remove = rbppc_cf_remove,
-+ .driver = {
-+ .name = "rbppc-cf",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rbppc_cf_ids,
-+ },
-+};
-+
-+static int __init rbppc_init(void)
-+{
-+ return platform_driver_register(&rbppc_cf_driver);
-+}
-+
-+static void __exit rbppc_exit(void)
-+{
-+ platform_driver_unregister(&rbppc_cf_driver);
-+}
-+
-+MODULE_AUTHOR("Mikrotikls SIA");
-+MODULE_AUTHOR("Noah Fontes");
-+MODULE_DESCRIPTION("MikroTik RouterBOARD 600 series Compact Flash PATA driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(rbppc_init);
-+module_exit(rbppc_exit);
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -432,6 +432,13 @@ config MTD_NAND_PLATFORM
- devices. You will need to provide platform-specific functions
- via platform_data.
-
-+config MTD_NAND_RB_PPC
-+ tristate "MikroTik RB333/600 NAND support"
-+ depends on RB_PPC
-+ help
-+ This option enables support for the NAND device on MikroTik
-+ RouterBOARD 333/600 series boards.
-+
- config MTD_ALAUDA
- tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
- depends on USB
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB_PPC) += rbppc_nand.o
- obj-$(CONFIG_MTD_ALAUDA) += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
---- /dev/null
-+++ b/drivers/mtd/nand/rbppc_nand.c
-@@ -0,0 +1,250 @@
-+/*
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_device.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+
-+#define DRV_NAME "rbppc_nand"
-+#define DRV_VERSION "0.0.2"
-+
-+static struct mtd_info rmtd;
-+static struct nand_chip rnand;
-+
-+struct rbppc_nand_info {
-+ void *gpi;
-+ void *gpo;
-+ void *localbus;
-+
-+ unsigned gpio_rdy;
-+ unsigned gpio_nce;
-+ unsigned gpio_cle;
-+ unsigned gpio_ale;
-+ unsigned gpio_ctrls;
-+};
-+
-+/* We must use the OOB layout from yaffs 1 if we want this to be recognized
-+ * properly. Borrowed from the OpenWRT patches for the RB532.
-+ *
-+ * See <https://dev.openwrt.org/browser/trunk/target/linux/rb532/
-+ * patches-2.6.28/025-rb532_nand_fixup.patch> for more details.
-+ */
-+static struct nand_ecclayout rbppc_nand_oob_16 = {
-+ .eccbytes = 6,
-+ .eccpos = { 8, 9, 10, 13, 14, 15 },
-+ .oobavail = 9,
-+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-+};
-+
-+static struct mtd_partition rbppc_nand_partition_info[] = {
-+ {
-+ name: "kernel",
-+ offset: 0,
-+ size: 4 * 1024 * 1024,
-+ },
-+ {
-+ name: "rootfs",
-+ offset: MTDPART_OFS_NXTBLK,
-+ size: MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static int rbppc_nand_dev_ready(struct mtd_info *mtd) {
-+ struct nand_chip *chip = mtd->priv;
-+ struct rbppc_nand_info *priv = chip->priv;
-+
-+ return in_be32(priv->gpi) & priv->gpio_rdy;
-+}
-+
-+static void rbppc_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) {
-+ struct nand_chip *chip = mtd->priv;
-+ struct rbppc_nand_info *priv = chip->priv;
-+
-+ if (ctrl & NAND_CTRL_CHANGE) {
-+ unsigned val = in_be32(priv->gpo);
-+ if (!(val & priv->gpio_nce)) {
-+ /* make sure Local Bus has done NAND operations */
-+ readb(priv->localbus);
-+ }
-+
-+ if (ctrl & NAND_CLE) {
-+ val |= priv->gpio_cle;
-+ } else {
-+ val &= ~priv->gpio_cle;
-+ }
-+ if (ctrl & NAND_ALE) {
-+ val |= priv->gpio_ale;
-+ } else {
-+ val &= ~priv->gpio_ale;
-+ }
-+ if (!(ctrl & NAND_NCE)) {
-+ val |= priv->gpio_nce;
-+ } else {
-+ val &= ~priv->gpio_nce;
-+ }
-+ out_be32(priv->gpo, val);
-+
-+ /* make sure GPIO output has changed */
-+ val ^= in_be32(priv->gpo);
-+ if (val & priv->gpio_ctrls) {
-+ printk(KERN_ERR "rbppc_nand_hwcontrol: NAND GPO change failed 0x%08x\n", val);
-+ }
-+ }
-+
-+ if (cmd != NAND_CMD_NONE) writeb(cmd, chip->IO_ADDR_W);
-+}
-+
-+static void rbppc_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ memcpy(buf, chip->IO_ADDR_R, len);
-+}
-+
-+static unsigned init_ok = 0;
-+
-+static int rbppc_nand_probe(struct platform_device *pdev)
-+{
-+ struct device_node *gpio;
-+ struct device_node *nnand;
-+ struct resource res;
-+ struct rbppc_nand_info *info;
-+ void *baddr;
-+ const unsigned *rdy, *nce, *cle, *ale;
-+
-+ printk(KERN_INFO "rbppc_nand_probe: MikroTik RouterBOARD 333/600 series NAND driver, version " DRV_VERSION "\n");
-+
-+ info = kmalloc(sizeof(*info), GFP_KERNEL);
-+
-+ rdy = of_get_property(pdev->dev.of_node, "rdy", NULL);
-+ nce = of_get_property(pdev->dev.of_node, "nce", NULL);
-+ cle = of_get_property(pdev->dev.of_node, "cle", NULL);
-+ ale = of_get_property(pdev->dev.of_node, "ale", NULL);
-+
-+ if (!rdy || !nce || !cle || !ale) {
-+ printk(KERN_ERR "rbppc_nand_probe: GPIO properties are missing\n");
-+ goto err;
-+ }
-+ if (rdy[0] != nce[0] || rdy[0] != cle[0] || rdy[0] != ale[0]) {
-+ printk(KERN_ERR "rbppc_nand_probe: Different GPIOs are not supported\n");
-+ goto err;
-+ }
-+
-+ gpio = of_find_node_by_phandle(rdy[0]);
-+ if (!gpio) {
-+ printk(KERN_ERR "rbppc_nand_probe: No GPIO<%x> node found\n", *rdy);
-+ goto err;
-+ }
-+ if (of_address_to_resource(gpio, 0, &res)) {
-+ printk(KERN_ERR "rbppc_nand_probe: No reg property in GPIO found\n");
-+ goto err;
-+ }
-+ info->gpo = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ if (!of_address_to_resource(gpio, 1, &res)) {
-+ info->gpi = ioremap_nocache(res.start, res.end - res.start + 1);
-+ } else {
-+ info->gpi = info->gpo;
-+ }
-+ of_node_put(gpio);
-+
-+ info->gpio_rdy = 1 << (31 - rdy[1]);
-+ info->gpio_nce = 1 << (31 - nce[1]);
-+ info->gpio_cle = 1 << (31 - cle[1]);
-+ info->gpio_ale = 1 << (31 - ale[1]);
-+ info->gpio_ctrls = info->gpio_nce | info->gpio_cle | info->gpio_ale;
-+
-+ nnand = of_find_node_by_name(NULL, "nnand");
-+ if (!nnand) {
-+ printk("rbppc_nand_probe: No nNAND found\n");
-+ goto err;
-+ }
-+ if (of_address_to_resource(nnand, 0, &res)) {
-+ printk("rbppc_nand_probe: No reg property in nNAND found\n");
-+ goto err;
-+ }
-+ of_node_put(nnand);
-+ info->localbus = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
-+ printk("rbppc_nand_probe: No reg property found\n");
-+ goto err;
-+ }
-+ baddr = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ memset(&rnand, 0, sizeof(rnand));
-+ rnand.cmd_ctrl = rbppc_nand_cmd_ctrl;
-+ rnand.dev_ready = rbppc_nand_dev_ready;
-+ rnand.read_buf = rbppc_nand_read_buf;
-+ rnand.IO_ADDR_W = baddr;
-+ rnand.IO_ADDR_R = baddr;
-+ rnand.priv = info;
-+
-+ memset(&rmtd, 0, sizeof(rmtd));
-+ rnand.ecc.mode = NAND_ECC_SOFT;
-+ rnand.ecc.layout = &rbppc_nand_oob_16;
-+ rnand.chip_delay = 25;
-+ rmtd.priv = &rnand;
-+ rmtd.owner = THIS_MODULE;
-+
-+ if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
-+ printk(KERN_ERR "rbppc_nand_probe: RouterBOARD NAND device not found\n");
-+ return -ENXIO;
-+ }
-+
-+ mtd_device_parse_register(&rmtd, NULL, 0, rbppc_nand_partition_info, 2);
-+ init_ok = 1;
-+ return 0;
-+
-+err:
-+ kfree(info);
-+ return -1;
-+}
-+
-+static struct of_device_id rbppc_nand_ids[] = {
-+ { .name = "nand", },
-+ { },
-+};
-+
-+static struct platform_driver rbppc_nand_driver = {
-+ .probe = rbppc_nand_probe,
-+ .driver = {
-+ .name = "rbppc-nand",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rbppc_nand_ids,
-+ },
-+};
-+
-+static int __init rbppc_nand_init(void)
-+{
-+ return platform_driver_register(&rbppc_nand_driver);
-+}
-+
-+static void __exit rbppc_nand_exit(void)
-+{
-+ platform_driver_unregister(&rbppc_nand_driver);
-+}
-+
-+MODULE_AUTHOR("Mikrotikls SIA");
-+MODULE_AUTHOR("Noah Fontes");
-+MODULE_AUTHOR("Michael Guntsche");
-+MODULE_DESCRIPTION("MikroTik RouterBOARD 333/600 series NAND driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(rbppc_nand_init);
-+module_exit(rbppc_nand_exit);
+++ /dev/null
---- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
-+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
-@@ -81,6 +81,11 @@
- reg = <0x3a0000 0x3c60000>;
- label = "rootfs";
- };
-+
-+ partition1@a0000 {
-+ reg = <0xa0000 0x3f60000>;
-+ label = "firmware";
-+ };
- };
- };
-
-@@ -476,4 +481,8 @@
- default-state = "off";
- };
- };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 rootfstype=squashfs noinitrd";
-+ };
- };
+++ /dev/null
---- a/arch/powerpc/Makefile
-+++ b/arch/powerpc/Makefile
-@@ -228,7 +228,9 @@ all: zImage
-
- # With make 3.82 we cannot mix normal and wildcard targets
- BOOT_TARGETS1 := zImage zImage.initrd uImage
--BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.%
-+BOOT_TARGETS2 := uImage.fit.% zImage% dtbImage% treeImage.% cuImage.% \
-+ simpleImage.% uImage.%
-+
-
- PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
-
-@@ -261,6 +263,7 @@ define archhelp
- @echo '* zImage - Build default images selected by kernel config'
- @echo ' zImage.* - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
- @echo ' uImage - U-Boot native image format'
-+ @echo ' uImage.fit.<dt> - U-Boot Flattened Image Tree image format'
- @echo ' cuImage.<dt> - Backwards compatible U-Boot image for older'
- @echo ' versions which do not support device trees'
- @echo ' dtbImage.<dt> - zImage with an embedded device tree blob'
---- a/arch/powerpc/boot/.gitignore
-+++ b/arch/powerpc/boot/.gitignore
-@@ -14,6 +14,7 @@ kernel-vmlinux.strip.c
- kernel-vmlinux.strip.gz
- mktree
- uImage
-+uImage.fit.*
- cuImage.*
- dtbImage.*
- *.dtb
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -340,6 +340,9 @@ $(obj)/uImage.initrd.%: vmlinux $(obj)/%
- $(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
- $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
-
-+$(obj)/uImage.fit.%: vmlinux $(obj)/%.dtb $(wrapperbits)
-+ $(call if_changed,wrap,uboot.fit,,$(obj)/$*.dtb)
-+
- $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
- $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
-
-@@ -377,6 +380,7 @@ install: $(CONFIGURE) $(addprefix $(obj)
-
- # anything not in $(targets)
- clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
-+ uImage.* \
- zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
- zImage.miboot zImage.pmac zImage.pseries \
- zImage.maple simpleImage.* otheros.bld *.dtb
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -47,6 +47,9 @@ CROSS=
- # mkimage wrapper script
- MKIMAGE=$srctree/scripts/mkuboot.sh
-
-+# script to generate an .its file for uImage.fit.* images
-+MKITS=$srctree/scripts/mkits.sh
-+
- # directory for object and other files used by this script
- object=arch/powerpc/boot
- objbin=$object
-@@ -349,6 +352,21 @@ uboot-obs600)
- if [ -z "$cacheit" ]; then
- rm -f "$vmz"
- fi
-+ exit 0
-+ ;;
-+uboot.fit)
-+ rm -f "$ofile"
-+ ${MKITS} -A ppc -C gzip -a $membase -e $membase -v $version \
-+ -d "$srctree/$dtb" -k "$srctree/$vmz" -o "$object/uImage.its"
-+
-+ # mkimage calls dtc for FIT images so use kernel dtc if necessary
-+ export PATH=$PATH:$srctree/scripts/dtc
-+
-+ ${MKIMAGE} -f "$object/uImage.its" "$ofile"
-+ rm "$object/uImage.its"
-+ if [ -z "$cacheit" ]; then
-+ rm -f "$vmz"
-+ fi
- exit 0
- ;;
- esac
+++ /dev/null
---- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
-+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
-@@ -460,4 +460,18 @@
- 0 0x00800000>;
- };
- };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ diag {
-+ gpios = <&gpio1 9 1>;
-+ default-state = "off";
-+ };
-+
-+ wireless {
-+ gpios = <&gpio1 10 1>;
-+ default-state = "off";
-+ };
-+ };
- };
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -68,6 +68,12 @@ config VITESSE_PHY
- ---help---
- Currently supports the vsc8244
-
-+config VITESSE_PHY_8601_SKEW
-+ bool "Enable skew timing to vsc8601"
-+ depends on VITESSE_PHY
-+ ---help---
-+ Apply clock timing adjustments for vsc8601
-+
- config SMSC_PHY
- tristate "Drivers for SMSC PHYs"
- ---help---
---- a/drivers/net/phy/vitesse.c
-+++ b/drivers/net/phy/vitesse.c
-@@ -31,6 +31,11 @@
- #define MII_VSC8244_EXTCON1_TX_SKEW 0x0800
- #define MII_VSC8244_EXTCON1_RX_SKEW 0x0200
-
-+/* EXT_CON1 Register values for VSC8601 */
-+#define MII_VSC8601_EXTCON1_INIT 0x0000
-+#define MII_VSC8601_EXTCON1_SKEW 0x0100
-+#define MII_VSC8601_EXTCON1_ACTIPHY 0x0020
-+
- /* Vitesse Interrupt Mask Register */
- #define MII_VSC8244_IMASK 0x19
- #define MII_VSC8244_IMASK_IEN 0x8000
-@@ -69,6 +74,7 @@
- #define PHY_ID_VSC8662 0x00070660
- #define PHY_ID_VSC8221 0x000fc550
- #define PHY_ID_VSC8211 0x000fc4b0
-+#define PHY_ID_VSC8601 0x00070420
-
- MODULE_DESCRIPTION("Vitesse PHY driver");
- MODULE_AUTHOR("Kriston Carson");
-@@ -110,6 +116,30 @@ static int vsc824x_config_init(struct ph
- return err;
- }
-
-+static int vsc8601_config_init(struct phy_device *phydev)
-+{
-+ int err;
-+ int extcon;
-+
-+ err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
-+ MII_VSC8244_AUXCONSTAT_INIT);
-+
-+ if (err < 0)
-+ return err;
-+
-+#ifdef CONFIG_VITESSE_PHY_8601_SKEW
-+ extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
-+ if (err < 0)
-+ return err;
-+
-+ extcon |= MII_VSC8601_EXTCON1_SKEW;
-+
-+ err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
-+#endif
-+
-+ return err;
-+}
-+
- static int vsc824x_ack_interrupt(struct phy_device *phydev)
- {
- int err = 0;
-@@ -309,6 +339,19 @@ static struct phy_driver vsc82xx_driver[
- .ack_interrupt = &vsc824x_ack_interrupt,
- .config_intr = &vsc82xx_config_intr,
- .driver = { .owner = THIS_MODULE,},
-+}, {
-+ /* Vitesse 8601 */
-+ .phy_id = PHY_ID_VSC8601,
-+ .name = "Vitesse VSC8601",
-+ .phy_id_mask = 0x000ffff8,
-+ .features = PHY_GBIT_FEATURES,
-+ .flags = PHY_HAS_INTERRUPT,
-+ .config_init = &vsc8601_config_init,
-+ .config_aneg = &genphy_config_aneg,
-+ .read_status = &genphy_read_status,
-+ .ack_interrupt = &vsc824x_ack_interrupt,
-+ .config_intr = &vsc82xx_config_intr,
-+ .driver = { .owner = THIS_MODULE,},
- } };
-
- static int __init vsc82xx_init(void)
+++ /dev/null
---- a/drivers/net/ethernet/freescale/gianfar.c
-+++ b/drivers/net/ethernet/freescale/gianfar.c
-@@ -1050,10 +1050,16 @@ static int gfar_probe(struct platform_de
- udelay(2);
-
- tempval = 0;
-- if (!priv->pause_aneg_en && priv->tx_pause_en)
-- tempval |= MACCFG1_TX_FLOW;
-- if (!priv->pause_aneg_en && priv->rx_pause_en)
-- tempval |= MACCFG1_RX_FLOW;
-+ /*
-+ * Do not enable flow control on chips earlier than rev 1.1,
-+ * because of the eTSEC27 erratum
-+ */
-+ if ((mfspr(SPRN_SVR) & 0xffff) >= 0x0011) {
-+ if (!priv->pause_aneg_en && priv->tx_pause_en)
-+ tempval |= MACCFG1_TX_FLOW;
-+ if (!priv->pause_aneg_en && priv->rx_pause_en)
-+ tempval |= MACCFG1_RX_FLOW;
-+ }
- /* the soft reset bit is not self-resetting, so we need to
- * clear it before resuming normal operation
- */
+++ /dev/null
---- /dev/null
-+++ b/drivers/misc/ucc_tdm.h
-@@ -0,0 +1,221 @@
-+/*
-+ * drivers/misc/ucc_tdm.h
-+ *
-+ * UCC Based Linux TDM Driver
-+ * This driver is designed to support UCC based TDM for PowerPC processors.
-+ * This driver can interface with SLIC device to run VOIP kind of
-+ * applications.
-+ *
-+ * Author: Ashish Kalra & Poonam Aggrwal
-+ *
-+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef TDM_H
-+#define TDM_H
-+
-+#define NUM_TS 8
-+#define ACTIVE_CH 8
-+
-+/* SAMPLE_DEPTH is the sample depth is the number of frames before
-+ * an interrupt. Must be a multiple of 4
-+ */
-+#define SAMPLE_DEPTH 80
-+
-+/* define the number of Rx interrupts to go by for initial stuttering */
-+#define STUTTER_INT_CNT 1
-+
-+/* BMRx Field Descriptions to specify tstate and rstate in UCC parameter RAM*/
-+#define EN_BUS_SNOOPING 0x20
-+#define BE_BO 0x10
-+
-+/* UPSMR Register for Transparent UCC controller Bit definitions*/
-+#define NBO 0x00000000 /* Normal Mode 1 bit of data per clock */
-+
-+/* SI Mode register bit definitions */
-+#define NORMAL_OPERATION 0x0000
-+#define AUTO_ECHO 0x0400
-+#define INTERNAL_LB 0x0800
-+#define CONTROL_LB 0x0c00
-+#define SIMODE_CRT (0x8000 >> 9)
-+#define SIMODE_SL (0x8000 >> 10)
-+#define SIMODE_CE (0x8000 >> 11)
-+#define SIMODE_FE (0x8000 >> 12)
-+#define SIMODE_GM (0x8000 >> 13)
-+#define SIMODE_TFSD(val) (val)
-+#define SIMODE_RFSD(val) ((val) << 8)
-+
-+#define SI_TDM_MODE_REGISTER_OFFSET 0
-+
-+#define R_CM 0x02000000
-+#define T_CM 0x02000000
-+
-+#define SET_RX_SI_RAM(n, val) \
-+ out_be16((u16 *)&qe_immr->sir.rx[(n)*2], (u16)(val))
-+
-+#define SET_TX_SI_RAM(n, val) \
-+ out_be16((u16 *)&qe_immr->sir.tx[(n)*2], (u16)(val))
-+
-+/* SI RAM entries */
-+#define SIR_LAST 0x0001
-+#define SIR_CNT(n) ((n) << 2)
-+#define SIR_BYTE 0x0002
-+#define SIR_BIT 0x0000
-+#define SIR_IDLE 0
-+#define SIR_UCC(uccx) (((uccx+9)) << 5)
-+
-+/* BRGC Register Bit definitions */
-+#define BRGC_RESET (0x1<<17)
-+#define BRGC_EN (0x1<<16)
-+#define BRGC_EXTC_QE (0x00<<14)
-+#define BRGC_EXTC_CLK3 (0x01<<14)
-+#define BRGC_EXTC_CLK5 (0x01<<15)
-+#define BRGC_EXTC_CLK9 (0x01<<14)
-+#define BRGC_EXTC_CLK11 (0x01<<14)
-+#define BRGC_EXTC_CLK13 (0x01<<14)
-+#define BRGC_EXTC_CLK15 (0x01<<15)
-+#define BRGC_ATB (0x1<<13)
-+#define BRGC_DIV16 (0x1)
-+
-+/* structure representing UCC transparent parameter RAM */
-+struct ucc_transparent_pram {
-+ __be16 riptr;
-+ __be16 tiptr;
-+ __be16 res0;
-+ __be16 mrblr;
-+ __be32 rstate;
-+ __be32 rbase;
-+ __be16 rbdstat;
-+ __be16 rbdlen;
-+ __be32 rdptr;
-+ __be32 tstate;
-+ __be32 tbase;
-+ __be16 tbdstat;
-+ __be16 tbdlen;
-+ __be32 tdptr;
-+ __be32 rbptr;
-+ __be32 tbptr;
-+ __be32 rcrc;
-+ __be32 res1;
-+ __be32 tcrc;
-+ __be32 res2;
-+ __be32 res3;
-+ __be32 c_mask;
-+ __be32 c_pres;
-+ __be16 disfc;
-+ __be16 crcec;
-+ __be32 res4[4];
-+ __be16 ts_tmp;
-+ __be16 tmp_mb;
-+};
-+
-+#define UCC_TRANSPARENT_PRAM_SIZE 0x100
-+
-+struct tdm_cfg {
-+ u8 com_pin; /* Common receive and transmit pins
-+ * 0 = separate pins
-+ * 1 = common pins
-+ */
-+
-+ u8 fr_sync_level; /* SLx bit Frame Sync Polarity
-+ * 0 = L1R/TSYNC active logic "1"
-+ * 1 = L1R/TSYNC active logic "0"
-+ */
-+
-+ u8 clk_edge; /* CEx bit Tx Rx Clock Edge
-+ * 0 = TX data on rising edge of clock
-+ * RX data on falling edge
-+ * 1 = TX data on falling edge of clock
-+ * RX data on rising edge
-+ */
-+
-+ u8 fr_sync_edge; /* FEx bit Frame sync edge
-+ * Determine when the sync pulses are sampled
-+ * 0 = Falling edge
-+ * 1 = Rising edge
-+ */
-+
-+ u8 rx_fr_sync_delay; /* TFSDx/RFSDx bits Frame Sync Delay
-+ * 00 = no bit delay
-+ * 01 = 1 bit delay
-+ * 10 = 2 bit delay
-+ * 11 = 3 bit delay
-+ */
-+
-+ u8 tx_fr_sync_delay; /* TFSDx/RFSDx bits Frame Sync Delay
-+ * 00 = no bit delay
-+ * 01 = 1 bit delay
-+ * 10 = 2 bit delay
-+ * 11 = 3 bit delay
-+ */
-+
-+ u8 active_num_ts; /* Number of active time slots in TDM
-+ * assume same active Rx/Tx time slots
-+ */
-+};
-+
-+struct ucc_tdm_info {
-+ struct ucc_fast_info uf_info;
-+ u32 ucc_busy;
-+};
-+
-+struct tdm_ctrl {
-+ u32 device_busy;
-+ struct device *device;
-+ struct ucc_fast_private *uf_private;
-+ struct ucc_tdm_info *ut_info;
-+ u32 tdm_port; /* port for this tdm:TDMA,TDMB,TDMC,TDMD */
-+ u32 si; /* serial interface: 0 or 1 */
-+ struct ucc_fast __iomem *uf_regs; /* UCC Fast registers */
-+ u16 rx_mask[8]; /* Active Receive channels LSB is ch0 */
-+ u16 tx_mask[8]; /* Active Transmit channels LSB is ch0 */
-+ /* Only channels less than the number of FRAME_SIZE are implemented */
-+ struct tdm_cfg cfg_ctrl; /* Signaling controls configuration */
-+ u8 *tdm_input_data; /* buffer used for Rx by the tdm */
-+ u8 *tdm_output_data; /* buffer used for Tx by the tdm */
-+
-+ dma_addr_t dma_input_addr; /* dma mapped buffer for TDM Rx */
-+ dma_addr_t dma_output_addr; /* dma mapped buffer for TDM Tx */
-+ u16 physical_num_ts; /* physical number of timeslots in the tdm
-+ frame */
-+ u32 phase_rx; /* cycles through 0, 1, 2 */
-+ u32 phase_tx; /* cycles through 0, 1, 2 */
-+ /*
-+ * the following two variables are for dealing with "stutter" problem
-+ * "stutter" period is about 20 frames or so, varies depending active
-+ * channel num depending on the sample depth, the code should let a
-+ * few Rx interrupts go by
-+ */
-+ u32 tdm_icnt;
-+ u32 tdm_flag;
-+ struct ucc_transparent_pram __iomem *ucc_pram;
-+ struct qe_bd __iomem *tx_bd;
-+ struct qe_bd __iomem *rx_bd;
-+ u32 ucc_pram_offset;
-+ u32 tx_bd_offset;
-+ u32 rx_bd_offset;
-+ u32 rx_ucode_buf_offset;
-+ u32 tx_ucode_buf_offset;
-+ bool leg_slic;
-+ wait_queue_head_t wakeup_event;
-+};
-+
-+struct tdm_client {
-+ u32 client_id;
-+ void (*tdm_read)(u32 client_id, short chn_id,
-+ short *pcm_buffer, short len);
-+ void (*tdm_write)(u32 client_id, short chn_id,
-+ short *pcm_buffer, short len);
-+ wait_queue_head_t *wakeup_event;
-+ };
-+
-+#define MAX_PHASE 1
-+#define NR_BUFS 2
-+#define EFF_ACTIVE_CH ACTIVE_CH / 2
-+
-+#endif
---- /dev/null
-+++ b/drivers/misc/ucc_tdm.c
-@@ -0,0 +1,1017 @@
-+/*
-+ * drivers/misc/ucc_tdm.c
-+ *
-+ * UCC Based Linux TDM Driver
-+ * This driver is designed to support UCC based TDM for PowerPC processors.
-+ * This driver can interface with SLIC device to run VOIP kind of
-+ * applications.
-+ *
-+ * Author: Ashish Kalra & Poonam Aggrwal
-+ *
-+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+#include <linux/time.h>
-+#include <linux/skbuff.h>
-+#include <linux/proc_fs.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/string.h>
-+#include <linux/irq.h>
-+#include <linux/of_platform.h>
-+#include <linux/io.h>
-+#include <linux/wait.h>
-+#include <linux/timer.h>
-+
-+#include <asm/immap_qe.h>
-+#include <asm/qe.h>
-+#include <asm/ucc.h>
-+#include <asm/ucc_fast.h>
-+#include <asm/ucc_slow.h>
-+
-+#include "ucc_tdm.h"
-+#define DRV_DESC "Freescale QE UCC TDM Driver"
-+#define DRV_NAME "ucc_tdm"
-+
-+
-+/*
-+ * define the following #define if snooping or hardware-based cache coherency
-+ * is disabled on the UCC transparent controller.This flag enables
-+ * software-based cache-coherency support by explicitly flushing data cache
-+ * contents after setting up the TDM output buffer(s) and invalidating the
-+ * data cache contents before the TDM input buffer(s) are read.
-+ */
-+#undef UCC_CACHE_SNOOPING_DISABLED
-+
-+#define MAX_NUM_TDM_DEVICES 8
-+
-+static struct tdm_ctrl *tdm_ctrl[MAX_NUM_TDM_DEVICES];
-+
-+static int num_tdm_devices;
-+static int num_tdm_clients;
-+
-+static struct ucc_tdm_info utdm_primary_info = {
-+ .uf_info = {
-+ .tsa = 1,
-+ .cdp = 1,
-+ .cds = 1,
-+ .ctsp = 1,
-+ .ctss = 1,
-+ .revd = 1,
-+ .urfs = 0x128,
-+ .utfs = 0x128,
-+ .utfet = 0,
-+ .utftt = 0x128,
-+ .ufpt = 256,
-+ .ttx_trx = UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT,
-+ .tenc = UCC_FAST_TX_ENCODING_NRZ,
-+ .renc = UCC_FAST_RX_ENCODING_NRZ,
-+ .tcrc = UCC_FAST_16_BIT_CRC,
-+ .synl = UCC_FAST_SYNC_LEN_NOT_USED,
-+ },
-+ .ucc_busy = 0,
-+};
-+
-+static struct ucc_tdm_info utdm_info[8];
-+
-+static void dump_siram(struct tdm_ctrl *tdm_c)
-+{
-+#ifdef DEBUG
-+ int i;
-+ u16 phy_num_ts;
-+
-+ phy_num_ts = tdm_c->physical_num_ts;
-+
-+ pr_debug("SI TxRAM dump\n");
-+ /* each slot entry in SI RAM is of 2 bytes */
-+ for (i = 0; i < phy_num_ts * 2; i++)
-+ pr_debug("%x ", in_8(&qe_immr->sir.tx[i]));
-+ pr_debug("\nSI RxRAM dump\n");
-+ for (i = 0; i < phy_num_ts * 2; i++)
-+ pr_debug("%x ", in_8(&qe_immr->sir.rx[i]));
-+ pr_debug("\n");
-+#endif
-+}
-+
-+static void dump_ucc(struct tdm_ctrl *tdm_c)
-+{
-+#ifdef DEBUG
-+ struct ucc_transparent_pram *ucc_pram;
-+
-+ ucc_pram = tdm_c->ucc_pram;
-+
-+ pr_debug("%s Dumping UCC Registers\n", __FUNCTION__);
-+ ucc_fast_dump_regs(tdm_c->uf_private);
-+ pr_debug("%s Dumping UCC Parameter RAM\n", __FUNCTION__);
-+ pr_debug("rbase = 0x%x\n", in_be32(&ucc_pram->rbase));
-+ pr_debug("rbptr = 0x%x\n", in_be32(&ucc_pram->rbptr));
-+ pr_debug("mrblr = 0x%x\n", in_be16(&ucc_pram->mrblr));
-+ pr_debug("rbdlen = 0x%x\n", in_be16(&ucc_pram->rbdlen));
-+ pr_debug("rbdstat = 0x%x\n", in_be16(&ucc_pram->rbdstat));
-+ pr_debug("rstate = 0x%x\n", in_be32(&ucc_pram->rstate));
-+ pr_debug("rdptr = 0x%x\n", in_be32(&ucc_pram->rdptr));
-+ pr_debug("tbase = 0x%x\n", in_be32(&ucc_pram->tbase));
-+ pr_debug("tbptr = 0x%x\n", in_be32(&ucc_pram->tbptr));
-+ pr_debug("tbdlen = 0x%x\n", in_be16(&ucc_pram->tbdlen));
-+ pr_debug("tbdstat = 0x%x\n", in_be16(&ucc_pram->tbdstat));
-+ pr_debug("tstate = 0x%x\n", in_be32(&ucc_pram->tstate));
-+ pr_debug("tdptr = 0x%x\n", in_be32(&ucc_pram->tdptr));
-+#endif
-+}
-+
-+/*
-+ * For use when a framing bit is not present
-+ * Program current-route SI ram
-+ * Set SIxRAM TDMx
-+ * Entries must be in units of 8.
-+ * SIR_UCC -> Channel Select
-+ * SIR_CNT -> Number of bits or bytes
-+ * SIR_BYTE -> Byte or Bit resolution
-+ * SIR_LAST -> Indicates last entry in SIxRAM
-+ * SIR_IDLE -> The Tx data pin is Tri-stated and the Rx data pin is
-+ * ignored
-+ */
-+static void set_siram(struct tdm_ctrl *tdm_c, enum comm_dir dir)
-+{
-+ const u16 *mask;
-+ u16 temp_mask = 1;
-+ u16 siram_code = 0;
-+ u32 i, j, k;
-+ u32 ucc;
-+ u32 phy_num_ts;
-+
-+ phy_num_ts = tdm_c->physical_num_ts;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+
-+ if (dir == COMM_DIR_RX)
-+ mask = tdm_c->rx_mask;
-+ else
-+ mask = tdm_c->tx_mask;
-+ k = 0;
-+ j = 0;
-+ for (i = 0; i < phy_num_ts; i++) {
-+ if ((mask[k] & temp_mask) == temp_mask)
-+ siram_code = SIR_UCC(ucc) | SIR_CNT(0) | SIR_BYTE;
-+ else
-+ siram_code = SIR_IDLE | SIR_CNT(0) | SIR_BYTE;
-+ if (dir == COMM_DIR_RX)
-+ out_be16((u16 *)&qe_immr->sir.rx[i * 2], siram_code);
-+ else
-+ out_be16((u16 *)&qe_immr->sir.tx[i * 2], siram_code);
-+ temp_mask = temp_mask << 1;
-+ j++;
-+ if (j >= 16) {
-+ j = 0;
-+ temp_mask = 0x0001;
-+ k++;
-+ }
-+ }
-+ siram_code = siram_code | SIR_LAST;
-+
-+ if (dir == COMM_DIR_RX)
-+ out_be16((u16 *)&qe_immr->sir.rx[(phy_num_ts - 1) * 2],
-+ siram_code);
-+ else
-+ out_be16((u16 *)&qe_immr->sir.tx[(phy_num_ts - 1) * 2],
-+ siram_code);
-+}
-+
-+static void config_si(struct tdm_ctrl *tdm_c)
-+{
-+ u8 rxsyncdelay, txsyncdelay, tdm_port;
-+ u16 sixmr_val = 0;
-+ u32 tdma_mode_off;
-+ u16 *si1_tdm_mode_reg;
-+
-+ tdm_port = tdm_c->tdm_port;
-+
-+ set_siram(tdm_c, COMM_DIR_RX);
-+
-+ set_siram(tdm_c, COMM_DIR_TX);
-+
-+ rxsyncdelay = tdm_c->cfg_ctrl.rx_fr_sync_delay;
-+ txsyncdelay = tdm_c->cfg_ctrl.tx_fr_sync_delay;
-+ if (tdm_c->cfg_ctrl.com_pin)
-+ sixmr_val |= SIMODE_CRT;
-+ if (tdm_c->cfg_ctrl.fr_sync_level == 1)
-+ sixmr_val |= SIMODE_SL;
-+ if (tdm_c->cfg_ctrl.clk_edge == 1)
-+ sixmr_val |= SIMODE_CE;
-+ if (tdm_c->cfg_ctrl.fr_sync_edge == 1)
-+ sixmr_val |= SIMODE_FE;
-+ sixmr_val |= (SIMODE_TFSD(txsyncdelay) | SIMODE_RFSD(rxsyncdelay));
-+
-+ tdma_mode_off = SI_TDM_MODE_REGISTER_OFFSET * tdm_c->tdm_port;
-+
-+ si1_tdm_mode_reg = (u8 *)&qe_immr->si1 + tdma_mode_off;
-+ out_be16(si1_tdm_mode_reg, sixmr_val);
-+
-+ dump_siram(tdm_c);
-+}
-+
-+static int tdm_init(struct tdm_ctrl *tdm_c)
-+{
-+ u32 tdm_port, ucc, act_num_ts;
-+ int ret, i, err;
-+ u32 cecr_subblock;
-+ u32 pram_offset;
-+ u32 rxbdt_offset;
-+ u32 txbdt_offset;
-+ u32 rx_ucode_buf_offset, tx_ucode_buf_offset;
-+ u16 bd_status, bd_len;
-+ enum qe_clock clock;
-+ struct qe_bd __iomem *rx_bd, *tx_bd;
-+
-+ tdm_port = tdm_c->tdm_port;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+ act_num_ts = tdm_c->cfg_ctrl.active_num_ts;
-+
-+ /*
-+ * TDM Tx and Rx CLKs = 2048 KHz.
-+ */
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_tx_clk, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_tx_clk);
-+ err = qe_setbrg(clock, 2048000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_tx_clk);
-+ return err;
-+ }
-+ }
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_rx_clk, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_rx_clk);
-+ err = qe_setbrg(clock, 2048000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_rx_clk);
-+ return err;
-+ }
-+ }
-+ /*
-+ * TDM FSyncs = 4 KHz.
-+ */
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_tx_sync, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_tx_sync);
-+ err = qe_setbrg(clock, 4000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_tx_sync);
-+ return err;
-+ }
-+ }
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_rx_sync, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_rx_sync);
-+ err = qe_setbrg(clock, 4000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_rx_sync);
-+ return err;
-+ }
-+ }
-+
-+ tdm_c->ut_info->uf_info.uccm_mask = (u32)
-+ ((UCC_TRANS_UCCE_RXB | UCC_TRANS_UCCE_BSY) << 16);
-+
-+ if (ucc_fast_init(&(tdm_c->ut_info->uf_info), &tdm_c->uf_private)) {
-+ printk(KERN_ERR "%s: Failed to init uccf\n", __FUNCTION__);
-+ return -ENOMEM;
-+ }
-+
-+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_RX | COMM_DIR_TX);
-+
-+ /* Write to QE CECR, UCCx channel to Stop Transmission */
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_STOP_TX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+
-+ pram_offset = qe_muram_alloc(UCC_TRANSPARENT_PRAM_SIZE,
-+ ALIGNMENT_OF_UCC_SLOW_PRAM);
-+ if (IS_ERR_VALUE(pram_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for"
-+ " transparent UCC\n", __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto pram_alloc_error;
-+ }
-+
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, cecr_subblock,
-+ QE_CR_PROTOCOL_UNSPECIFIED, pram_offset);
-+
-+ tdm_c->ucc_pram = qe_muram_addr(pram_offset);
-+ tdm_c->ucc_pram_offset = pram_offset;
-+
-+ /*
-+ * zero-out pram, this will also ensure RSTATE, TSTATE are cleared, also
-+ * DISFC & CRCEC counters will be initialized.
-+ */
-+ memset(tdm_c->ucc_pram, 0, sizeof(struct ucc_transparent_pram));
-+
-+ /* rbase, tbase alignment is 8. */
-+ rxbdt_offset = qe_muram_alloc(NR_BUFS * sizeof(struct qe_bd),
-+ QE_ALIGNMENT_OF_BD);
-+ if (IS_ERR_VALUE(rxbdt_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for RxBDs\n",
-+ __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto rxbd_alloc_error;
-+ }
-+ txbdt_offset = qe_muram_alloc(NR_BUFS * sizeof(struct qe_bd),
-+ QE_ALIGNMENT_OF_BD);
-+ if (IS_ERR_VALUE(txbdt_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for TxBDs\n",
-+ __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto txbd_alloc_error;
-+ }
-+ tdm_c->tx_bd = qe_muram_addr(txbdt_offset);
-+ tdm_c->rx_bd = qe_muram_addr(rxbdt_offset);
-+
-+ tdm_c->tx_bd_offset = txbdt_offset;
-+ tdm_c->rx_bd_offset = rxbdt_offset;
-+
-+ rx_bd = tdm_c->rx_bd;
-+ tx_bd = tdm_c->tx_bd;
-+
-+ out_be32(&tdm_c->ucc_pram->rbase, (u32) immrbar_virt_to_phys(rx_bd));
-+ out_be32(&tdm_c->ucc_pram->tbase, (u32) immrbar_virt_to_phys(tx_bd));
-+
-+ for (i = 0; i < NR_BUFS - 1; i++) {
-+ bd_status = (u16) ((R_E | R_CM | R_I) >> 16);
-+ bd_len = 0;
-+ out_be16(&rx_bd->length, bd_len);
-+ out_be16(&rx_bd->status, bd_status);
-+ out_be32(&rx_bd->buf,
-+ tdm_c->dma_input_addr + i * SAMPLE_DEPTH * act_num_ts);
-+ rx_bd += 1;
-+
-+ bd_status = (u16) ((T_R | T_CM) >> 16);
-+ bd_len = SAMPLE_DEPTH * act_num_ts;
-+ out_be16(&tx_bd->length, bd_len);
-+ out_be16(&tx_bd->status, bd_status);
-+ out_be32(&tx_bd->buf,
-+ tdm_c->dma_output_addr + i * SAMPLE_DEPTH * act_num_ts);
-+ tx_bd += 1;
-+ }
-+
-+ bd_status = (u16) ((R_E | R_CM | R_I | R_W) >> 16);
-+ bd_len = 0;
-+ out_be16(&rx_bd->length, bd_len);
-+ out_be16(&rx_bd->status, bd_status);
-+ out_be32(&rx_bd->buf,
-+ tdm_c->dma_input_addr + i * SAMPLE_DEPTH * act_num_ts);
-+
-+ bd_status = (u16) ((T_R | T_CM | T_W) >> 16);
-+ bd_len = SAMPLE_DEPTH * act_num_ts;
-+ out_be16(&tx_bd->length, bd_len);
-+ out_be16(&tx_bd->status, bd_status);
-+ out_be32(&tx_bd->buf,
-+ tdm_c->dma_output_addr + i * SAMPLE_DEPTH * act_num_ts);
-+
-+ config_si(tdm_c);
-+
-+ setbits32(&qe_immr->ic.qimr, (0x80000000UL >> ucc));
-+
-+ rx_ucode_buf_offset = qe_muram_alloc(32, 32);
-+ if (IS_ERR_VALUE(rx_ucode_buf_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM mem for Rx"
-+ " ucode buf\n", __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto rxucode_buf_alloc_error;
-+ }
-+
-+ tx_ucode_buf_offset = qe_muram_alloc(32, 32);
-+ if (IS_ERR_VALUE(tx_ucode_buf_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM mem for Tx"
-+ " ucode buf\n", __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto txucode_buf_alloc_error;
-+ }
-+ out_be16(&tdm_c->ucc_pram->riptr, (u16) rx_ucode_buf_offset);
-+ out_be16(&tdm_c->ucc_pram->tiptr, (u16) tx_ucode_buf_offset);
-+
-+ tdm_c->rx_ucode_buf_offset = rx_ucode_buf_offset;
-+ tdm_c->tx_ucode_buf_offset = tx_ucode_buf_offset;
-+
-+ /*
-+ * set the receive buffer descriptor maximum size to be
-+ * SAMPLE_DEPTH * number of active RX channels
-+ */
-+ out_be16(&tdm_c->ucc_pram->mrblr, (u16) SAMPLE_DEPTH * act_num_ts);
-+
-+ /*
-+ * enable snooping and BE byte ordering on the UCC pram's
-+ * tstate & rstate registers.
-+ */
-+ out_be32(&tdm_c->ucc_pram->tstate, 0x30000000UL);
-+ out_be32(&tdm_c->ucc_pram->rstate, 0x30000000UL);
-+
-+ /*Put UCC transparent controller into serial interface mode. */
-+ out_be32(&tdm_c->uf_regs->upsmr, 0);
-+
-+ /* Reset TX and RX for UCCx */
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+
-+ return 0;
-+
-+txucode_buf_alloc_error:
-+ qe_muram_free(rx_ucode_buf_offset);
-+rxucode_buf_alloc_error:
-+ qe_muram_free(txbdt_offset);
-+txbd_alloc_error:
-+ qe_muram_free(rxbdt_offset);
-+rxbd_alloc_error:
-+ qe_muram_free(pram_offset);
-+pram_alloc_error:
-+ ucc_fast_free(tdm_c->uf_private);
-+ return ret;
-+}
-+
-+static void tdm_deinit(struct tdm_ctrl *tdm_c)
-+{
-+ qe_muram_free(tdm_c->rx_ucode_buf_offset);
-+ qe_muram_free(tdm_c->tx_ucode_buf_offset);
-+
-+ if (tdm_c->rx_bd_offset) {
-+ qe_muram_free(tdm_c->rx_bd_offset);
-+ tdm_c->rx_bd = NULL;
-+ tdm_c->rx_bd_offset = 0;
-+ }
-+ if (tdm_c->tx_bd_offset) {
-+ qe_muram_free(tdm_c->tx_bd_offset);
-+ tdm_c->tx_bd = NULL;
-+ tdm_c->tx_bd_offset = 0;
-+ }
-+ if (tdm_c->ucc_pram_offset) {
-+ qe_muram_free(tdm_c->ucc_pram_offset);
-+ tdm_c->ucc_pram = NULL;
-+ tdm_c->ucc_pram_offset = 0;
-+ }
-+}
-+
-+
-+static irqreturn_t tdm_isr(int irq, void *dev_id)
-+{
-+ u8 *input_tdm_buffer, *output_tdm_buffer;
-+ u32 txb, rxb;
-+ u32 ucc;
-+ register u32 ucce = 0;
-+ struct tdm_ctrl *tdm_c;
-+ tdm_c = (struct tdm_ctrl *)dev_id;
-+
-+ tdm_c->tdm_icnt++;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+ input_tdm_buffer = tdm_c->tdm_input_data;
-+ output_tdm_buffer = tdm_c->tdm_output_data;
-+
-+ if (in_be32(tdm_c->uf_private->p_ucce) &
-+ (UCC_TRANS_UCCE_BSY << 16)) {
-+ out_be32(tdm_c->uf_private->p_ucce,
-+ (UCC_TRANS_UCCE_BSY << 16));
-+ pr_info("%s: From tdm isr busy interrupt\n",
-+ __FUNCTION__);
-+ dump_ucc(tdm_c);
-+
-+ return IRQ_HANDLED;
-+ }
-+
-+ if (tdm_c->tdm_flag == 1) {
-+ /* track phases for Rx/Tx */
-+ tdm_c->phase_rx += 1;
-+ if (tdm_c->phase_rx == MAX_PHASE)
-+ tdm_c->phase_rx = 0;
-+
-+ tdm_c->phase_tx += 1;
-+ if (tdm_c->phase_tx == MAX_PHASE)
-+ tdm_c->phase_tx = 0;
-+
-+#ifdef CONFIG_TDM_HW_LB_TSA_SLIC
-+ {
-+ u32 temp_rx, temp_tx, phase_tx, phase_rx;
-+ int i;
-+ phase_rx = tdm_c->phase_rx;
-+ phase_tx = tdm_c->phase_tx;
-+ if (phase_rx == 0)
-+ phase_rx = MAX_PHASE;
-+ else
-+ phase_rx -= 1;
-+ if (phase_tx == 0)
-+ phase_tx = MAX_PHASE;
-+ else
-+ phase_tx -= 1;
-+ temp_rx = phase_rx * SAMPLE_DEPTH * ACTIVE_CH;
-+ temp_tx = phase_tx * SAMPLE_DEPTH * ACTIVE_CH;
-+
-+ /*check if loopback received data on TS0 is correct. */
-+ pr_debug("%s: check if loopback received data on TS0"
-+ " is correct\n", __FUNCTION__);
-+ pr_debug("%d,%d ", phase_rx, phase_tx);
-+ for (i = 0; i < 8; i++)
-+ pr_debug("%1d,%1d ",
-+ input_tdm_buffer[temp_rx + i],
-+ output_tdm_buffer[temp_tx + i]);
-+ pr_debug("\n");
-+ }
-+#endif
-+
-+ /* schedule BH */
-+ wake_up_interruptible(&tdm_c->wakeup_event);
-+ } else {
-+ if (tdm_c->tdm_icnt == STUTTER_INT_CNT) {
-+ txb = in_be32(&tdm_c->ucc_pram->tbptr) -
-+ in_be32(&tdm_c->ucc_pram->tbase);
-+ rxb = in_be32(&tdm_c->ucc_pram->rbptr) -
-+ in_be32(&tdm_c->ucc_pram->rbase);
-+ tdm_c->phase_tx = txb / sizeof(struct qe_bd);
-+ tdm_c->phase_rx = rxb / sizeof(struct qe_bd);
-+
-+#ifdef CONFIG_TDM_HW_LB_TSA_SLIC
-+ tdm_c->phase_tx = tdm_c->phase_rx;
-+#endif
-+
-+ /* signal "stuttering" period is over */
-+ tdm_c->tdm_flag = 1;
-+
-+ pr_debug("%s: stuttering period is over\n",
-+ __FUNCTION__);
-+
-+ if (in_be32(tdm_c->uf_private->p_ucce) &
-+ (UCC_TRANS_UCCE_TXE << 16)) {
-+ u32 cecr_subblock;
-+ out_be32(tdm_c->uf_private->p_ucce,
-+ (UCC_TRANS_UCCE_TXE << 16));
-+ pr_debug("%s: From tdm isr txe interrupt\n",
-+ __FUNCTION__);
-+
-+ cecr_subblock =
-+ ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED,
-+ 0);
-+ }
-+ }
-+ }
-+
-+ ucce = (in_be32(tdm_c->uf_private->p_ucce)
-+ & in_be32(tdm_c->uf_private->p_uccm));
-+
-+ out_be32(tdm_c->uf_private->p_ucce, ucce);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int tdm_start(struct tdm_ctrl *tdm_c)
-+{
-+ if (request_irq(tdm_c->ut_info->uf_info.irq, tdm_isr,
-+ 0, "tdm", tdm_c)) {
-+ printk(KERN_ERR "%s: request_irq for tdm_isr failed\n",
-+ __FUNCTION__);
-+ return -ENODEV;
-+ }
-+
-+ ucc_fast_enable(tdm_c->uf_private, COMM_DIR_RX | COMM_DIR_TX);
-+
-+ pr_info("%s 16-bit linear pcm mode active with"
-+ " slots 0 & 2\n", __FUNCTION__);
-+
-+ dump_siram(tdm_c);
-+ dump_ucc(tdm_c);
-+
-+ setbits8(&(qe_immr->si1.siglmr1_h), (0x1 << tdm_c->tdm_port));
-+ pr_info("%s UCC based TDM enabled\n", __FUNCTION__);
-+
-+ return 0;
-+}
-+
-+static void tdm_stop(struct tdm_ctrl *tdm_c)
-+{
-+ u32 port, si;
-+ u32 ucc;
-+ u32 cecr_subblock;
-+
-+ port = tdm_c->tdm_port;
-+ si = tdm_c->si;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+
-+ qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+ qe_issue_cmd(QE_CLOSE_RX_BD, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+
-+ clrbits8(&qe_immr->si1.siglmr1_h, (0x1 << port));
-+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_RX);
-+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_TX);
-+ free_irq(tdm_c->ut_info->uf_info.irq, tdm_c);
-+}
-+
-+
-+static void config_tdm(struct tdm_ctrl *tdm_c)
-+{
-+ u32 i, j, k;
-+
-+ j = 0;
-+ k = 0;
-+
-+ /* Set Mask Bits */
-+ for (i = 0; i < ACTIVE_CH; i++) {
-+ tdm_c->tx_mask[k] |= (1 << j);
-+ tdm_c->rx_mask[k] |= (1 << j);
-+ j++;
-+ if (j >= 16) {
-+ j = 0;
-+ k++;
-+ }
-+ }
-+ /* physical number of slots in a frame */
-+ tdm_c->physical_num_ts = NUM_TS;
-+
-+ /* common receive and transmit pins */
-+ tdm_c->cfg_ctrl.com_pin = 1;
-+
-+ /* L1R/TSYNC active logic "1" */
-+ tdm_c->cfg_ctrl.fr_sync_level = 0;
-+
-+ /*
-+ * TX data on rising edge of clock
-+ * RX data on falling edge
-+ */
-+ tdm_c->cfg_ctrl.clk_edge = 0;
-+
-+ /* Frame sync sampled on falling edge */
-+ tdm_c->cfg_ctrl.fr_sync_edge = 0;
-+
-+ /* no bit delay */
-+ tdm_c->cfg_ctrl.rx_fr_sync_delay = 0;
-+
-+ /* no bit delay */
-+ tdm_c->cfg_ctrl.tx_fr_sync_delay = 0;
-+
-+#ifndef CONFIG_TDM_HW_LB_TSA_SLIC
-+ if (tdm_c->leg_slic) {
-+ /* Need 1 bit delay for Legrity SLIC */
-+ tdm_c->cfg_ctrl.rx_fr_sync_delay = 1;
-+ tdm_c->cfg_ctrl.tx_fr_sync_delay = 1;
-+ pr_info("%s Delay for Legerity!\n", __FUNCTION__);
-+ }
-+#endif
-+
-+ tdm_c->cfg_ctrl.active_num_ts = ACTIVE_CH;
-+}
-+
-+static void tdm_read(u32 client_id, short chn_id, short *pcm_buffer,
-+ short len)
-+{
-+ int i;
-+ u32 phase_rx;
-+ /* point to where to start for the current phase data processing */
-+ u32 temp_rx;
-+
-+ struct tdm_ctrl *tdm_c = tdm_ctrl[client_id];
-+
-+ u16 *input_tdm_buffer =
-+ (u16 *)tdm_c->tdm_input_data;
-+
-+ phase_rx = tdm_c->phase_rx;
-+ if (phase_rx == 0)
-+ phase_rx = MAX_PHASE;
-+ else
-+ phase_rx -= 1;
-+
-+ temp_rx = phase_rx * SAMPLE_DEPTH * EFF_ACTIVE_CH;
-+
-+#ifdef UCC_CACHE_SNOOPING_DISABLED
-+ flush_dcache_range((size_t) &input_tdm_buffer[temp_rx],
-+ (size_t) &input_tdm_buffer[temp_rx +
-+ SAMPLE_DEPTH * ACTIVE_CH]);
-+#endif
-+ for (i = 0; i < len; i++)
-+ pcm_buffer[i] =
-+ input_tdm_buffer[i * EFF_ACTIVE_CH + temp_rx + chn_id];
-+
-+}
-+
-+static void tdm_write(u32 client_id, short chn_id, short *pcm_buffer,
-+ short len)
-+{
-+ int i;
-+ int phase_tx;
-+ u32 txb;
-+ /* point to where to start for the current phase data processing */
-+ int temp_tx;
-+ struct tdm_ctrl *tdm_c = tdm_ctrl[client_id];
-+
-+ u16 *output_tdm_buffer;
-+ output_tdm_buffer = (u16 *)tdm_c->tdm_output_data;
-+ txb = in_be32(&tdm_c->ucc_pram->tbptr) -
-+ in_be32(&tdm_c->ucc_pram->tbase);
-+ phase_tx = txb / sizeof(struct qe_bd);
-+
-+ if (phase_tx == 0)
-+ phase_tx = MAX_PHASE;
-+ else
-+ phase_tx -= 1;
-+
-+ temp_tx = phase_tx * SAMPLE_DEPTH * EFF_ACTIVE_CH;
-+
-+ for (i = 0; i < len; i++)
-+ output_tdm_buffer[i * EFF_ACTIVE_CH + temp_tx + chn_id] =
-+ pcm_buffer[i];
-+
-+#ifdef UCC_CACHE_SNOOPING_DISABLED
-+ flush_dcache_range((size_t) &output_tdm_buffer[temp_tx],
-+ (size_t) &output_tdm_buffer[temp_tx + SAMPLE_DEPTH *
-+ ACTIVE_CH]);
-+#endif
-+}
-+
-+
-+static int tdm_register_client(struct tdm_client *tdm_client)
-+{
-+ u32 i;
-+ if (num_tdm_clients == num_tdm_devices) {
-+ printk(KERN_ERR "all TDM devices busy\n");
-+ return -EBUSY;
-+ }
-+
-+ for (i = 0; i < num_tdm_devices; i++) {
-+ if (!tdm_ctrl[i]->device_busy) {
-+ tdm_ctrl[i]->device_busy = 1;
-+ break;
-+ }
-+ }
-+ num_tdm_clients++;
-+ tdm_client->client_id = i;
-+ tdm_client->tdm_read = tdm_read;
-+ tdm_client->tdm_write = tdm_write;
-+ tdm_client->wakeup_event =
-+ &(tdm_ctrl[i]->wakeup_event);
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(tdm_register_client);
-+
-+static int tdm_deregister_client(struct tdm_client *tdm_client)
-+{
-+ num_tdm_clients--;
-+ tdm_ctrl[tdm_client->client_id]->device_busy = 0;
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(tdm_deregister_client);
-+
-+static int ucc_tdm_probe(struct of_device *ofdev,
-+ const struct of_device_id *match)
-+{
-+ struct device_node *np = ofdev->node;
-+ struct resource res;
-+ const unsigned int *prop;
-+ u32 ucc_num, device_num, err, ret = 0;
-+ struct device_node *np_tmp;
-+ dma_addr_t physaddr;
-+ void *tdm_buff;
-+ struct ucc_tdm_info *ut_info;
-+
-+ prop = of_get_property(np, "device-id", NULL);
-+ if (prop == NULL) {
-+ printk(KERN_ERR "ucc_tdm: device-id missing\n");
-+ return -ENODEV;
-+ }
-+
-+ ucc_num = *prop - 1;
-+ if ((ucc_num < 0) || (ucc_num > 7))
-+ return -ENODEV;
-+
-+ ut_info = &utdm_info[ucc_num];
-+ if (ut_info->ucc_busy) {
-+ printk(KERN_ERR "ucc_tdm: UCC in use by another TDM driver"
-+ "instance\n");
-+ return -EBUSY;
-+ }
-+ if (num_tdm_devices == MAX_NUM_TDM_DEVICES) {
-+ printk(KERN_ERR "ucc_tdm: All TDM devices already"
-+ " initialized\n");
-+ return -ENODEV;
-+ }
-+
-+ ut_info->ucc_busy = 1;
-+ tdm_ctrl[num_tdm_devices++] =
-+ kzalloc(sizeof(struct tdm_ctrl), GFP_KERNEL);
-+ if (!tdm_ctrl[num_tdm_devices - 1]) {
-+ printk(KERN_ERR "ucc_tdm: no memory to allocate for"
-+ " tdm control structure\n");
-+ num_tdm_devices--;
-+ return -ENOMEM;
-+ }
-+ device_num = num_tdm_devices - 1;
-+
-+ tdm_ctrl[device_num]->device = &ofdev->dev;
-+ tdm_ctrl[device_num]->ut_info = ut_info;
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.ucc_num = ucc_num;
-+
-+ prop = of_get_property(np, "fsl,tdm-num", NULL);
-+ if (prop == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->tdm_port = *prop - 1;
-+
-+ if (tdm_ctrl[device_num]->tdm_port > 3) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ prop = of_get_property(np, "fsl,si-num", NULL);
-+ if (prop == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->si = *prop - 1;
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_clk =
-+ of_get_property(np, "fsl,tdm-tx-clk", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_clk == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_clk =
-+ of_get_property(np, "fsl,tdm-rx-clk", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_clk == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_sync =
-+ of_get_property(np, "fsl,tdm-tx-sync", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_sync == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_sync =
-+ of_get_property(np, "fsl,tdm-rx-sync", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_sync == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.irq =
-+ irq_of_parse_and_map(np, 0);
-+ err = of_address_to_resource(np, 0, &res);
-+ if (err) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+ tdm_ctrl[device_num]->ut_info->uf_info.regs = res.start;
-+ tdm_ctrl[device_num]->uf_regs = of_iomap(np, 0);
-+
-+ np_tmp = NULL;
-+ np_tmp = of_find_compatible_node(np_tmp, "slic", "legerity-slic");
-+ if (np_tmp != NULL) {
-+ tdm_ctrl[device_num]->leg_slic = 1;
-+ of_node_put(np_tmp);
-+ } else
-+ tdm_ctrl[device_num]->leg_slic = 0;
-+
-+ config_tdm(tdm_ctrl[device_num]);
-+
-+ tdm_buff = dma_alloc_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
-+ tdm_ctrl[device_num]->cfg_ctrl.active_num_ts,
-+ &physaddr, GFP_KERNEL);
-+ if (!tdm_buff) {
-+ printk(KERN_ERR "ucc-tdm: could not allocate buffer"
-+ "descriptors\n");
-+ ret = -ENOMEM;
-+ goto alloc_error;
-+ }
-+
-+ tdm_ctrl[device_num]->tdm_input_data = tdm_buff;
-+ tdm_ctrl[device_num]->dma_input_addr = physaddr;
-+
-+ tdm_ctrl[device_num]->tdm_output_data = tdm_buff + NR_BUFS *
-+ SAMPLE_DEPTH * tdm_ctrl[device_num]->cfg_ctrl.active_num_ts;
-+ tdm_ctrl[device_num]->dma_output_addr = physaddr + NR_BUFS *
-+ SAMPLE_DEPTH * tdm_ctrl[device_num]->cfg_ctrl.active_num_ts;
-+
-+ init_waitqueue_head(&(tdm_ctrl[device_num]->wakeup_event));
-+
-+ ret = tdm_init(tdm_ctrl[device_num]);
-+ if (ret != 0)
-+ goto tdm_init_error;
-+
-+ ret = tdm_start(tdm_ctrl[device_num]);
-+ if (ret != 0)
-+ goto tdm_start_error;
-+
-+ dev_set_drvdata(&(ofdev->dev), tdm_ctrl[device_num]);
-+
-+ pr_info("%s UCC based tdm module installed\n", __FUNCTION__);
-+ return 0;
-+
-+tdm_start_error:
-+ tdm_deinit(tdm_ctrl[device_num]);
-+tdm_init_error:
-+ dma_free_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
-+ tdm_ctrl[device_num]->cfg_ctrl.active_num_ts,
-+ tdm_ctrl[device_num]->tdm_input_data,
-+ tdm_ctrl[device_num]->dma_input_addr);
-+
-+alloc_error:
-+ irq_dispose_mapping(tdm_ctrl[device_num]->ut_info->uf_info.irq);
-+ iounmap(tdm_ctrl[device_num]->uf_regs);
-+
-+get_property_error:
-+ num_tdm_devices--;
-+ kfree(tdm_ctrl[device_num]);
-+ ut_info->ucc_busy = 0;
-+ return ret;
-+}
-+
-+static int ucc_tdm_remove(struct of_device *ofdev)
-+{
-+ struct tdm_ctrl *tdm_c;
-+ struct ucc_tdm_info *ut_info;
-+ u32 ucc_num;
-+
-+ tdm_c = dev_get_drvdata(&(ofdev->dev));
-+ dev_set_drvdata(&(ofdev->dev), NULL);
-+ ucc_num = tdm_c->ut_info->uf_info.ucc_num;
-+ ut_info = &utdm_info[ucc_num];
-+ tdm_stop(tdm_c);
-+ tdm_deinit(tdm_c);
-+
-+ ucc_fast_free(tdm_c->uf_private);
-+
-+ dma_free_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
-+ tdm_c->cfg_ctrl.active_num_ts,
-+ tdm_c->tdm_input_data,
-+ tdm_c->dma_input_addr);
-+
-+ irq_dispose_mapping(tdm_c->ut_info->uf_info.irq);
-+ iounmap(tdm_c->uf_regs);
-+
-+ num_tdm_devices--;
-+ kfree(tdm_c);
-+
-+ ut_info->ucc_busy = 0;
-+
-+ pr_info("%s UCC based tdm module uninstalled\n", __FUNCTION__);
-+ return 0;
-+}
-+
-+const struct of_device_id ucc_tdm_match[] = {
-+ { .type = "tdm", .compatible = "fsl,ucc-tdm", },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, ucc_tdm_match);
-+
-+static struct of_platform_driver ucc_tdm_driver = {
-+ .name = DRV_NAME,
-+ .match_table = ucc_tdm_match,
-+ .probe = ucc_tdm_probe,
-+ .remove = ucc_tdm_remove,
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init ucc_tdm_init(void)
-+{
-+ u32 i;
-+
-+ pr_info("ucc_tdm: " DRV_DESC "\n");
-+ for (i = 0; i < 8; i++)
-+ memcpy(&(utdm_info[i]), &utdm_primary_info,
-+ sizeof(utdm_primary_info));
-+
-+ return of_register_platform_driver(&ucc_tdm_driver);
-+}
-+
-+static void __exit ucc_tdm_exit(void)
-+{
-+ of_unregister_platform_driver(&ucc_tdm_driver);
-+}
-+
-+module_init(ucc_tdm_init);
-+module_exit(ucc_tdm_exit);
-+MODULE_AUTHOR("Freescale Semiconductor, Inc");
-+MODULE_DESCRIPTION(DRV_DESC);
-+MODULE_LICENSE("GPL");
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_INTEL_MID_PTI) += pti.o
- obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
- obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
- obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
-+obj-$(CONFIG_UCC_TDM) += ucc_tdm.o
- obj-$(CONFIG_BMP085) += bmp085.o
- obj-$(CONFIG_BMP085_I2C) += bmp085-i2c.o
- obj-$(CONFIG_BMP085_SPI) += bmp085-spi.o
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -210,6 +210,20 @@ config ATMEL_SSC
-
- If unsure, say N.
-
-+config UCC_TDM
-+ tristate "Freescale UCC TDM Driver"
-+ depends on QUICC_ENGINE && UCC_FAST
-+ default n
-+ help
-+ The TDM driver is for UCC based TDM devices for example, TDM device on
-+ MPC832x RDB. Select it to run PowerVoIP on MPC832x RDB board.
-+ The TDM driver can interface with SLIC kind of devices to transmit
-+ and receive TDM samples. The TDM driver receives Time Division
-+ multiplexed samples(for different channels) from the SLIC device,
-+ demutiplexes them and sends them to the upper layers. At the transmit
-+ end the TDM drivers receives samples for different channels, it
-+ multiplexes them and sends them to the SLIC device.
-+
- config ENCLOSURE_SERVICES
- tristate "Enclosure Services"
- default n
---- a/arch/powerpc/include/asm/ucc_fast.h
-+++ b/arch/powerpc/include/asm/ucc_fast.h
-@@ -150,6 +150,10 @@ struct ucc_fast_info {
- enum ucc_fast_rx_decoding_method renc;
- enum ucc_fast_transparent_tcrc tcrc;
- enum ucc_fast_sync_len synl;
-+ char *tdm_rx_clk;
-+ char *tdm_tx_clk;
-+ char *tdm_rx_sync;
-+ char *tdm_tx_sync;
- };
-
- struct ucc_fast_private {
---- a/arch/powerpc/include/asm/qe.h
-+++ b/arch/powerpc/include/asm/qe.h
-@@ -670,6 +670,14 @@ struct ucc_slow_pram {
- #define UCC_GETH_UCCE_RXF1 0x00000002
- #define UCC_GETH_UCCE_RXF0 0x00000001
-
-+/* Transparent UCC Event Register (UCCE) */
-+#define UCC_TRANS_UCCE_GRA 0x0080
-+#define UCC_TRANS_UCCE_TXE 0x0010
-+#define UCC_TRANS_UCCE_RXF 0x0008
-+#define UCC_TRANS_UCCE_BSY 0x0004
-+#define UCC_TRANS_UCCE_TXB 0x0002
-+#define UCC_TRANS_UCCE_RXB 0x0001
-+
- /* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
- #define UCC_UART_UPSMR_FLC 0x8000
- #define UCC_UART_UPSMR_SL 0x4000
+++ /dev/null
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -90,7 +90,8 @@ src-plat-$(CONFIG_44x) += treeboot-ebony
- src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
- src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
- src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
--src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c
-+src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c \
-+ rb600.c rb333.c
- src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
- src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
- cuboot-c2k.c gamecube-head.S \
-@@ -262,6 +263,8 @@ image-$(CONFIG_MPC834x_ITX) += cuImage.
- image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds
- image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds
- image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot
-+image-$(CONFIG_RB_PPC) += dtbImage.rb600 \
-+ dtbImage.rb333
-
- # Board ports in arch/powerpc/platform/85xx/Kconfig
- image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
---- /dev/null
-+++ b/arch/powerpc/boot/dts/rb600.dts
-@@ -0,0 +1,283 @@
-+/*
-+ * RouterBOARD 600 series Device Tree Source
-+ *
-+ * Copyright 2009 Michael Guntsche <mike@it-loops.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+/dts-v1/;
-+
-+/ {
-+ model = "RB600";
-+ compatible = "MPC83xx";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ aliases {
-+ ethernet0 = &enet0;
-+ ethernet1 = &enet1;
-+ pci0 = &pci0;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 board=mpc8323 rootfstype=squashfs,yaffs2,jffs2 root=/dev/mtdblock1 boot=1";
-+ linux,stdout-path = "/soc8343@e0000000/serial@4500";
-+ };
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ PowerPC,8343E@0 {
-+ device_type = "cpu";
-+ reg = <0x0>;
-+ d-cache-line-size = <0x20>;
-+ i-cache-line-size = <0x20>;
-+ d-cache-size = <0x8000>;
-+ i-cache-size = <0x8000>;
-+ timebase-frequency = <0x0000000>; // filled by the bootwrapper from the firmware blob
-+ clock-frequency = <0x00000000>; // filled by the bootwrapper from the firmware blob
-+ };
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
-+ };
-+
-+ cf@f9200000 {
-+ lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
-+ interrupt-at-level = <0x0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x16 0x8>;
-+ lbc_extra_divider = <0x1>;
-+ reg = <0xf9200000 0x200000>;
-+ device_type = "rb,cf";
-+ };
-+
-+ cf@f9000000 {
-+ lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
-+ interrupt-at-level = <0x0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x14 0x8>;
-+ lbc_extra_divider = <0x1>;
-+ reg = <0xf9000000 0x200000>;
-+ device_type = "rb,cf";
-+ };
-+
-+ flash {
-+ reg = <0xff800000 0x20000>;
-+ };
-+
-+ nnand {
-+ reg = <0xf0000000 0x1000>;
-+ };
-+
-+ nand {
-+ ale = <&gpio 0x6>;
-+ cle = <&gpio 0x5>;
-+ nce = <&gpio 0x4>;
-+ rdy = <&gpio 0x3>;
-+ reg = <0xf8000000 0x1000>;
-+ device_type = "rb,nand";
-+ };
-+
-+ fancon {
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x17 0x8>;
-+ sense = <&gpio 0x7>;
-+ fan_on = <&gpio 0x9>;
-+ };
-+
-+ pci0: pci@e0008500 {
-+ device_type = "pci";
-+ compatible = "fsl,mpc8349-pci";
-+ reg = <0xe0008500 0x100 0xe0008300 0x8>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
-+ bus-range = <0x0 0x0>;
-+ interrupt-map = <
-+ 0x5800 0x0 0x0 0x1 &ipic 0x15 0x8
-+ 0x6000 0x0 0x0 0x1 &ipic 0x30 0x8
-+ 0x6000 0x0 0x0 0x2 &ipic 0x11 0x8
-+ 0x6800 0x0 0x0 0x1 &ipic 0x11 0x8
-+ 0x6800 0x0 0x0 0x2 &ipic 0x12 0x8
-+ 0x7000 0x0 0x0 0x1 &ipic 0x12 0x8
-+ 0x7000 0x0 0x0 0x2 &ipic 0x13 0x8
-+ 0x7800 0x0 0x0 0x1 &ipic 0x13 0x8
-+ 0x7800 0x0 0x0 0x2 &ipic 0x30 0x8
-+ 0x8000 0x0 0x0 0x1 &ipic 0x30 0x8
-+ 0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
-+ 0x8000 0x0 0x0 0x3 &ipic 0x11 0x8
-+ 0x8000 0x0 0x0 0x4 &ipic 0x13 0x8
-+ 0xa000 0x0 0x0 0x1 &ipic 0x30 0x8
-+ 0xa000 0x0 0x0 0x2 &ipic 0x11 0x8
-+ 0xa000 0x0 0x0 0x3 &ipic 0x12 0x8
-+ 0xa000 0x0 0x0 0x4 &ipic 0x13 0x8
-+ 0xa800 0x0 0x0 0x1 &ipic 0x11 0x8
-+ 0xa800 0x0 0x0 0x2 &ipic 0x12 0x8
-+ 0xa800 0x0 0x0 0x3 &ipic 0x13 0x8
-+ 0xa800 0x0 0x0 0x4 &ipic 0x30 0x8>;
-+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-+ interrupt-parent = <&ipic>;
-+ };
-+
-+ soc8343@e0000000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ device_type = "soc";
-+ compatible = "simple-bus";
-+ ranges = <0x0 0xe0000000 0x100000>;
-+ reg = <0xe0000000 0x200>;
-+ bus-frequency = <0x1>;
-+
-+ led {
-+ user_led = <0x400 0x8>;
-+ };
-+
-+ beeper {
-+ reg = <0x500 0x100>;
-+ };
-+
-+ gpio: gpio@0 {
-+ reg = <0xc08 0x4>;
-+ device-id = <0x0>;
-+ compatible = "gpio";
-+ device_type = "gpio";
-+ };
-+
-+ dma@82a8 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-+ reg = <0x82a8 4>;
-+ ranges = <0 0x8100 0x1a8>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ cell-index = <0>;
-+ dma-channel@0 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0 0x80>;
-+ cell-index = <0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@80 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x80 0x80>;
-+ cell-index = <1>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@100 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x100 0x80>;
-+ cell-index = <2>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@180 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x180 0x28>;
-+ cell-index = <3>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ };
-+
-+ enet0: ethernet@25000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ cell-index = <0>;
-+ phy-handle = <&phy0>;
-+ tbi-handle = <&tbi0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ reg = <0x25000 0x1000>;
-+ ranges = <0x0 0x25000 0x1000>;
-+ compatible = "gianfar";
-+ model = "TSEC";
-+ device_type = "network";
-+
-+ mdio@520 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "fsl,gianfar-tbi";
-+ reg = <0x520 0x20>;
-+
-+ tbi0: tbi-phy@11 {
-+ reg = <0x11>;
-+ device_type = "tbi-phy";
-+ };
-+ };
-+ };
-+
-+ enet1: ethernet@24000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ cell-index = <1>;
-+ phy-handle = <&phy1>;
-+ tbi-handle = <&tbi1>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ reg = <0x24000 0x1000>;
-+ ranges = <0x0 0x24000 0x1000>;
-+ compatible = "gianfar";
-+ model = "TSEC";
-+ device_type = "network";
-+
-+ mdio@520 {
-+ #size-cells = <0x0>;
-+ #address-cells = <0x1>;
-+ reg = <0x520 0x20>;
-+ compatible = "fsl,gianfar-mdio";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0x0>;
-+ };
-+
-+ phy1: ethernet-phy@1 {
-+ device_type = "ethernet-phy";
-+ reg = <0x1>;
-+ };
-+
-+ tbi1: tbi-phy@11 {
-+ reg = <0x11>;
-+ device_type = "tbi-phy";
-+ };
-+ };
-+ };
-+
-+ ipic: pic@700 {
-+ interrupt-controller;
-+ #address-cells = <0>;
-+ #interrupt-cells = <2>;
-+ reg = <0x700 0x100>;
-+ device_type = "ipic";
-+ };
-+
-+ serial@4500 {
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x9 0x8>;
-+ clock-frequency = <0xfe4f840>;
-+ reg = <0x4500 0x100>;
-+ compatible = "ns16550";
-+ device_type = "serial";
-+ };
-+
-+ wdt@200 {
-+ reg = <0x200 0x100>;
-+ compatible = "mpc83xx_wdt";
-+ device_type = "watchdog";
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/powerpc/boot/rb600.c
-@@ -0,0 +1,70 @@
-+/*
-+ * The RouterBOARD platform -- for booting RB600(A) RouterBOARDs.
-+ *
-+ * Author: Michael Guntsche <mike@it-loops.com>
-+ *
-+ * Copyright (c) 2009 Michael Guntsche
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "types.h"
-+#include "io.h"
-+#include "stdio.h"
-+#include <libfdt.h>
-+
-+BSS_STACK(4*1024);
-+
-+u64 memsize64;
-+const void *fw_dtb;
-+
-+static void rb600_fixups(void)
-+{
-+ const u32 *reg, *timebase, *clock;
-+ int node, size;
-+
-+ dt_fixup_memory(0, memsize64);
-+
-+ /* Set the MAC addresses. */
-+ node = fdt_path_offset(fw_dtb, "/soc8343@e0000000/ethernet@24000");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet1", (const u8 *)reg);
-+
-+ node = fdt_path_offset(fw_dtb, "/soc8343@e0000000/ethernet@25000");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet0", (const u8 *)reg);
-+
-+ /* Find the CPU timebase and clock frequencies. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "cpu", sizeof("cpu"));
-+ timebase = fdt_getprop(fw_dtb, node, "timebase-frequency", &size);
-+ clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
-+ dt_fixup_cpu_clocks(*clock, *timebase, 0);
-+
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+ unsigned long r6, unsigned long r7)
-+{
-+ const u32 *reg;
-+ int node, size;
-+
-+ fw_dtb = (const void *)r3;
-+
-+ /* Find the memory range. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "memory", sizeof("memory"));
-+ reg = fdt_getprop(fw_dtb, node, "reg", &size);
-+ memsize64 = reg[1];
-+
-+ /* Now we have the memory size; initialize the heap. */
-+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
-+
-+ /* Prepare the device tree and find the console. */
-+ fdt_init(_dtb_start);
-+ serial_console_init();
-+
-+ /* Remaining fixups... */
-+ platform_ops.fixups = rb600_fixups;
-+}
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -225,7 +225,7 @@ ps3)
- make_space=n
- pie=
- ;;
--ep88xc|ep405|ep8248e)
-+ep88xc|ep405|ep8248e|rb600|rb333)
- platformo="$object/fixed-head.o $object/$platform.o"
- binary=y
- ;;
---- a/arch/powerpc/platforms/83xx/Kconfig
-+++ b/arch/powerpc/platforms/83xx/Kconfig
-@@ -38,6 +38,15 @@ config MPC832x_RDB
- help
- This option enables support for the MPC8323 RDB board.
-
-+config RB_PPC
-+ bool "MikroTik RouterBOARD 333/600 series"
-+ select DEFAULT_UIMAGE
-+ select QUICC_ENGINE
-+ select PPC_MPC832x
-+ select PPC_MPC834x
-+ help
-+ This option enables support for MikroTik RouterBOARD 333/600 series boards.
-+
- config MPC834x_MDS
- bool "Freescale MPC834x MDS"
- select DEFAULT_UIMAGE
---- /dev/null
-+++ b/arch/powerpc/boot/dts/rb333.dts
-@@ -0,0 +1,426 @@
-+
-+/*
-+ * RouterBOARD 333 series Device Tree Source
-+ *
-+ * Copyright 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ * Copyright 2009 Michael Guntsche <mike@it-loops.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * Warning (reg_format): "reg" property in /qe@e0100000/muram@10000/data-only@0 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
-+ * Warning (ranges_format): "ranges" property in /qe@e0100000/muram@10000 has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1)
-+ * Warning (avoid_default_addr_size): Relying on default #address-cells value for /qe@e0100000/muram@10000/data-only@0
-+ * Warning (avoid_default_addr_size): Relying on default #size-cells value for /qe@e0100000/muram@10000/data-only@0
-+ * Warning (obsolete_chosen_interrupt_controller): /chosen has obsolete "interrupt-controller" property
-+ *
-+ */
-+
-+
-+/dts-v1/;
-+
-+/ {
-+ model = "RB333";
-+ compatible = "MPC83xx";
-+ #size-cells = <1>;
-+ #address-cells = <1>;
-+
-+ aliases {
-+ ethernet0 = &enet0;
-+ ethernet1 = &enet1;
-+ ethernet2 = &enet2;
-+ pci0 = &pci0;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 board=mpc8323 rootfstype=squashfs,yaffs2,jffs2 root=/dev/mtdblock1 boot=1";
-+ // linux,platform = <0x8062>;
-+ // linux,initrd = <0x488000 0x0>;
-+ linux,stdout-path = "/soc8323@e0000000/serial@4500";
-+ // interrupt-controller = <&ipic>;
-+ };
-+
-+ cpus {
-+ #cpus = <1>;
-+ #size-cells = <0>;
-+ #address-cells = <1>;
-+
-+ PowerPC,8323E@0 {
-+ device_type = "cpu";
-+ reg = <0x0>;
-+ i-cache-size = <0x4000>;
-+ d-cache-size = <0x4000>;
-+ i-cache-line-size = <0x20>;
-+ d-cache-line-size = <0x20>;
-+ // clock-frequency = <0x13de3650>;
-+ // timebase-frequency = <0x1fc9f08>;
-+ timebase-frequency = <0x0000000>; // filled by the bootwrapper from the firmware blob
-+ clock-frequency = <0x00000000>; // filled by the bootwrapper from the firmware blob
-+ 32-bit;
-+ };
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x0 0x4000000>;
-+ // reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
-+ };
-+
-+ flash {
-+ reg = <0xfe000000 0x20000>;
-+ };
-+
-+ nand {
-+ ale = <&gpio2 0x3>;
-+ cle = <&gpio2 0x2>;
-+ nce = <&gpio2 0x1>;
-+ rdy = <&gpio2 0x0>;
-+ reg = <0xf8000000 0x1000>;
-+ device_type = "rb,nand";
-+ };
-+
-+ nnand {
-+ reg = <0xf0000000 0x1000>;
-+ };
-+
-+ voltage {
-+ voltage_gpio = <&gpio3 0x11>;
-+ };
-+
-+ fancon {
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x14 0x8>;
-+ fan_on = <&gpio0 0x10>;
-+ };
-+
-+ soc8323@e0000000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ device_type = "soc";
-+ compatible = "simple-bus";
-+ ranges = <0x0 0xe0000000 0x00100000>;
-+ reg = <0xe0000000 0x00000200>;
-+ bus-frequency = <1>;
-+
-+ wdt@200 {
-+ device_type = "watchdog";
-+ compatible = "mpc83xx_wdt";
-+ reg = <0x200 0x100>;
-+ };
-+
-+ ipic:pic@700 {
-+ interrupt-controller;
-+ #address-cells = <0>;
-+ #interrupt-cells = <2>;
-+ reg = <0x700 0x100>;
-+ device_type = "ipic";
-+ };
-+
-+ par_io@1400 {
-+ num-ports = <4>;
-+ device_type = "par_io";
-+ reg = <0x1400 0x100>;
-+
-+ ucc2pio: ucc_pin@02 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 3 4 3 0 2 0
-+ 3 5 1 0 2 0
-+ 0 18 1 0 1 0
-+ 0 19 1 0 1 0
-+ 0 20 1 0 1 0
-+ 0 21 1 0 1 0
-+ 0 30 1 0 1 0
-+ 3 6 2 0 1 0
-+ 0 29 2 0 1 0
-+ 0 31 2 0 1 0
-+ 0 22 2 0 1 0
-+ 0 23 2 0 1 0
-+ 0 24 2 0 1 0
-+ 0 25 2 0 1 0
-+ 0 28 2 0 1 0
-+ 0 26 2 0 1 0
-+ 3 31 2 0 1 0>;
-+ };
-+
-+ ucc3pio: ucc_pin@03 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 1 0 1 0 1 0
-+ 1 1 1 0 1 0
-+ 1 2 1 0 1 0
-+ 1 3 1 0 1 0
-+ 1 12 1 0 1 0
-+ 3 24 2 0 1 0
-+ 1 11 2 0 1 0
-+ 1 13 2 0 1 0
-+ 1 4 2 0 1 0
-+ 1 5 2 0 1 0
-+ 1 6 2 0 1 0
-+ 1 7 2 0 1 0
-+ 1 10 2 0 1 0
-+ 1 8 2 0 1 0
-+ 3 29 2 0 1 0>;
-+ };
-+
-+ ucc4pio: ucc_pin@04 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 1 18 1 0 1 0
-+ 1 19 1 0 1 0
-+ 1 20 1 0 1 0
-+ 1 21 1 0 1 0
-+ 1 30 1 0 1 0
-+ 3 20 2 0 1 0
-+ 1 30 2 0 1 0
-+ 1 31 2 0 1 0
-+ 1 22 2 0 1 0
-+ 1 23 2 0 1 0
-+ 1 24 2 0 1 0
-+ 1 25 2 0 1 0
-+ 1 28 2 0 1 0
-+ 1 26 2 0 1 0
-+ 3 21 2 0 1 0>;
-+ };
-+ };
-+
-+ serial0: serial@4500 {
-+ cell-index = <0>;
-+ device_type = "serial";
-+ compatible = "fsl,ns16550", "ns16550";
-+ reg = <0x4500 0x100>;
-+ clock-frequency = <0x7f27c20>;
-+ interrupts = <9 0x8>;
-+ interrupt-parent = <&ipic>;
-+ };
-+
-+ dma@82a8 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
-+ reg = <0x82a8 4>;
-+ ranges = <0 0x8100 0x1a8>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ cell-index = <0>;
-+ dma-channel@0 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0 0x80>;
-+ cell-index = <0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@80 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x80 0x80>;
-+ cell-index = <1>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@100 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x100 0x80>;
-+ cell-index = <2>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@180 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x180 0x28>;
-+ cell-index = <3>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ };
-+
-+ beeper {
-+ gpio = <&gpio3 0x12>;
-+ reg = <0x500 0x100>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x48 0x8>;
-+ };
-+
-+ gpio3: gpio@3 {
-+ reg = <0x144c 0x4>;
-+ device-id = <0x3>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+
-+ gpio2: gpio@2 {
-+ reg = <0x1434 0x4>;
-+ device-id = <0x2>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+
-+ gpio0: gpio@0 {
-+ reg = <0x1404 0x4>;
-+ device-id = <0x0>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+ };
-+
-+ pci0: pci@e0008500 {
-+ device_type = "pci";
-+ // compatible = "83xx";
-+ compatible = "fsl,mpc8349-pci";
-+ reg = <0xe0008500 0x100 0xe0008300 0x8>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ // clock-frequency = <0>;
-+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
-+ bus-range = <0x0 0x0>;
-+ interrupt-map = <
-+ /* IDSEL 0x10 AD16 miniPCI slot 0 */
-+ 0x8000 0x0 0x0 0x1 &ipic 0x11 0x8
-+ 0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
-+
-+ /* IDSEL 0x11 AD17 miniPCI slot 1 */
-+ 0x8800 0x0 0x0 0x1 &ipic 0x12 0x8
-+ 0x8800 0x0 0x0 0x2 &ipic 0x13 0x8
-+
-+ /* IDSEL 0x12 AD18 miniPCI slot 2 */
-+ 0x9000 0x0 0x0 0x1 &ipic 0x13 0x8
-+ 0x9000 0x0 0x0 0x2 &ipic 0x11 0x8>;
-+
-+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-+ interrupt-parent = <&ipic>;
-+ // interrupts = <66 0x8>;
-+ };
-+
-+ qe@e0100000 {
-+ reg = <0xe0100000 0x480>;
-+ ranges = <0x0 0xe0100000 0x100000>;
-+ model = "QE";
-+ device_type = "qe";
-+ compatible = "fsl,qe";
-+ #size-cells = <1>;
-+ #address-cells = <1>;
-+ brg-frequency = <0>;
-+ bus-frequency = <0>;
-+ // bus-frequency = <198000000>;
-+ fsl,qe-num-riscs = <1>;
-+ fsl,qe-num-snums = <28>;
-+
-+ qeic: qeic@80 {
-+ interrupt-controller;
-+ compatible = "fsl,qe-ic";
-+ big-endian;
-+ built-in;
-+ reg = <0x80 0x80>;
-+ #interrupt-cells = <1>;
-+ #address-cells = <0>;
-+ device_type = "qeic";
-+ interrupts = <0x20 0x8 0x21 0x8>;
-+ interrupt-parent = <&ipic>;
-+ };
-+
-+ mdio@2120 {
-+ compatible = "ucc_geth_phy";
-+ device_type = "mdio";
-+ reg = <0x3120 0x18>;
-+ #size-cells = <0>;
-+ #address-cells = <1>;
-+
-+ phy3: ethernet-phy@03 {
-+ // interface = <0x3>;
-+ device_type = "ethernet-phy";
-+ reg = <0x3>;
-+ };
-+
-+ phy2: ethernet-phy@02 {
-+ // interface = <0x3>;
-+ device_type = "ethernet-phy";
-+ reg = <0x2>;
-+ };
-+
-+ phy1: ethernet-phy@01 {
-+ // interface = <0x3>;
-+ device_type = "ethernet-phy";
-+ reg = <0x1>;
-+ };
-+ };
-+
-+ enet0: ucc@2200 {
-+ tx-clock = <0x1a>;
-+ rx-clock = <0x1f>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x22>;
-+ reg = <0x2200 0x200>;
-+ device-id = <0x3>;
-+ model = "UCC";
-+ compatible = "ucc_geth";
-+ device_type = "network";
-+ phy-handle = <&phy2>;
-+ pio-handle = <&ucc3pio>;
-+ };
-+
-+ enet1: ucc@3200 {
-+ tx-clock = <0x22>;
-+ rx-clock = <0x20>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x23>;
-+ reg = <0x3200 0x200>;
-+ device-id = <0x4>;
-+ model = "UCC";
-+ compatible = "ucc_geth";
-+ device_type = "network";
-+ phy-handle = <&phy3>;
-+ pio-handle = <&ucc4pio>;
-+ };
-+
-+ enet2: ucc@3000 {
-+ tx-clock = <0x18>;
-+ rx-clock = <0x17>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x21>;
-+ reg = <0x3000 0x200>;
-+ device-id = <0x2>;
-+ model = "UCC";
-+ compatible = "ucc_geth";
-+ device_type = "network";
-+ phy-handle = <&phy1>;
-+ pio-handle = <&ucc2pio>;
-+ };
-+
-+ spi@500 {
-+ mode = "cpu";
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x1>;
-+ reg = <0x500 0x40>;
-+ compatible = "fsl,spi";
-+ device_type = "spi";
-+ };
-+
-+ spi@4c0 {
-+ mode = "cpu";
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x2>;
-+ reg = <0x4c0 0x40>;
-+ compatible = "fsl,spi";
-+ device_type = "spi";
-+ };
-+
-+ muram@10000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
-+ ranges = <0x0 0x10000 0x4000>;
-+ device_type = "muram";
-+
-+ data-only@0 {
-+ compatible = "fsl,qe-muram-data",
-+ "fsl,cpm-muram-data";
-+ reg = <0x0 0x4000>;
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/powerpc/boot/rb333.c
-@@ -0,0 +1,86 @@
-+/*
-+ * The RouterBOARD platform -- for booting RB333 RouterBOARDs.
-+ *
-+ * Author: Alexandros C. Couloumbis <alex@ozo.com>
-+ * Author: Michael Guntsche <mike@it-loops.com>
-+ *
-+ * Copyright (c) 2010 Alexandros C. Couloumbis
-+ * Copyright (c) 2009 Michael Guntsche
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "types.h"
-+#include "io.h"
-+#include "stdio.h"
-+#include <libfdt.h>
-+
-+BSS_STACK(4*1024);
-+
-+u64 memsize64;
-+const void *fw_dtb;
-+
-+static void rb333_fixups(void)
-+{
-+ const u32 *reg, *timebase, *clock;
-+ int node, size;
-+ void *chosen;
-+ const char* bootargs;
-+
-+ dt_fixup_memory(0, memsize64);
-+
-+ /* Find the CPU timebase and clock frequencies. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "cpu", sizeof("cpu"));
-+ timebase = fdt_getprop(fw_dtb, node, "timebase-frequency", &size);
-+ clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
-+ dt_fixup_cpu_clocks(*clock, *timebase, 0);
-+
-+ /* Set the MAC addresses. */
-+ node = fdt_path_offset(fw_dtb, "/qe@e0100000/ucc@2200");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet0", (const u8 *)reg);
-+
-+ node = fdt_path_offset(fw_dtb, "/qe@e0100000/ucc@3200");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet1", (const u8 *)reg);
-+
-+ node = fdt_path_offset(fw_dtb, "/qe@e0100000/ucc@3000");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet2", (const u8 *)reg);
-+
-+ /* Fixup chosen
-+ * The bootloader reads the kernelparm segment and adds the content to
-+ * bootargs. This is needed to specify root and other boot flags.
-+ */
-+ chosen = finddevice("/chosen");
-+ node = fdt_path_offset(fw_dtb, "/chosen");
-+ bootargs = fdt_getprop(fw_dtb, node, "bootargs", &size);
-+ setprop_str(chosen, "bootargs", bootargs);
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+ unsigned long r6, unsigned long r7)
-+{
-+ const u32 *reg;
-+ int node, size;
-+
-+ fw_dtb = (const void *)r3;
-+
-+ /* Find the memory range. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "memory", sizeof("memory"));
-+ reg = fdt_getprop(fw_dtb, node, "reg", &size);
-+ memsize64 = reg[1];
-+
-+ /* Now we have the memory size; initialize the heap. */
-+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
-+
-+ /* Prepare the device tree and find the console. */
-+ fdt_init(_dtb_start);
-+ serial_console_init();
-+
-+ /* Remaining fixups... */
-+ platform_ops.fixups = rb333_fixups;
-+}
---- /dev/null
-+++ b/arch/powerpc/platforms/83xx/rbppc.c
-@@ -0,0 +1,388 @@
-+/*
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/root_dev.h>
-+#include <linux/initrd.h>
-+#include <linux/interrupt.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_device.h>
-+#include <linux/of_platform.h>
-+#include <linux/pci.h>
-+#include <asm/time.h>
-+#include <asm/ipic.h>
-+#include <asm/udbg.h>
-+#include <asm/qe.h>
-+#include <asm/qe_ic.h>
-+#include <sysdev/fsl_soc.h>
-+#include <sysdev/fsl_pci.h>
-+#include "mpc83xx.h"
-+
-+#define SYSCTL 0x100
-+#define SICRL 0x014
-+
-+#define GTCFR2 0x04
-+#define GTMDR4 0x22
-+#define GTRFR4 0x26
-+#define GTCNR4 0x2e
-+#define GTVER4 0x36
-+#define GTPSR4 0x3e
-+
-+#define GTCFR_BCM 0x40
-+#define GTCFR_STP4 0x20
-+#define GTCFR_RST4 0x10
-+#define GTCFR_STP3 0x02
-+#define GTCFR_RST3 0x01
-+
-+#define GTMDR_ORI 0x10
-+#define GTMDR_FRR 0x08
-+#define GTMDR_ICLK16 0x04
-+
-+extern int par_io_data_set(u8 port, u8 pin, u8 val);
-+extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-+ int assignment, int has_irq);
-+
-+static unsigned timer_freq;
-+static void *gtm;
-+
-+static int beeper_irq;
-+static unsigned beeper_gpio_pin[2];
-+
-+int rb333model = 0;
-+
-+irqreturn_t rbppc_timer_irq(int irq, void *ptr)
-+{
-+ static int toggle = 0;
-+
-+ par_io_data_set(beeper_gpio_pin[0], beeper_gpio_pin[1], toggle);
-+ toggle = !toggle;
-+
-+ /* ack interrupt */
-+ out_be16(gtm + GTVER4, 3);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+void rbppc_beep(unsigned freq)
-+{
-+ unsigned gtmdr;
-+
-+ if (freq > 5000) freq = 5000;
-+
-+ if (!gtm)
-+ return;
-+ if (!freq) {
-+ out_8(gtm + GTCFR2, GTCFR_STP4 | GTCFR_STP3);
-+ return;
-+ }
-+
-+ out_8(gtm + GTCFR2, GTCFR_RST4 | GTCFR_STP3);
-+ out_be16(gtm + GTPSR4, 255);
-+ gtmdr = GTMDR_FRR | GTMDR_ICLK16;
-+ if (beeper_irq != NO_IRQ) gtmdr |= GTMDR_ORI;
-+ out_be16(gtm + GTMDR4, gtmdr);
-+ out_be16(gtm + GTVER4, 3);
-+
-+ out_be16(gtm + GTRFR4, timer_freq / 16 / 256 / freq / 2);
-+ out_be16(gtm + GTCNR4, 0);
-+}
-+EXPORT_SYMBOL(rbppc_beep);
-+
-+static void __init rbppc_setup_arch(void)
-+{
-+ struct device_node *np;
-+
-+ np = of_find_node_by_type(NULL, "cpu");
-+ if (np) {
-+ const unsigned *fp = of_get_property(np, "clock-frequency", NULL);
-+ loops_per_jiffy = fp ? *fp / HZ : 0;
-+
-+ of_node_put(np);
-+ }
-+
-+ np = of_find_node_by_name(NULL, "serial");
-+ if (np) {
-+ timer_freq =
-+ *(unsigned *) of_get_property(np, "clock-frequency", NULL);
-+ of_node_put(np);
-+ }
-+
-+#ifdef CONFIG_PCI
-+ np = of_find_node_by_type(NULL, "pci");
-+ if (np) {
-+ mpc83xx_add_bridge(np);
-+ }
-+#endif
-+
-+if (rb333model) {
-+
-+#ifdef CONFIG_QUICC_ENGINE
-+ qe_reset();
-+
-+ if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
-+ par_io_init(np);
-+ of_node_put(np);
-+
-+ for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
-+ par_io_of_config(np);
-+ }
-+#endif
-+
-+} /* RB333 */
-+
-+}
-+
-+void __init rbppc_init_IRQ(void)
-+{
-+ struct device_node *np;
-+
-+ np = of_find_node_by_type(NULL, "ipic");
-+ if (np) {
-+ ipic_init(np, 0);
-+ ipic_set_default_priority();
-+ of_node_put(np);
-+ }
-+
-+if (rb333model) {
-+
-+#ifdef CONFIG_QUICC_ENGINE
-+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-+ if (!np) {
-+ np = of_find_node_by_type(NULL, "qeic");
-+ if (!np)
-+ return;
-+ }
-+ qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-+ of_node_put(np);
-+#endif /* CONFIG_QUICC_ENGINE */
-+
-+} /* RB333 */
-+
-+}
-+
-+static int __init rbppc_probe(void)
-+{
-+ char *model;
-+
-+ model = of_get_flat_dt_prop(of_get_flat_dt_root(), "model", NULL);
-+
-+ if (!model)
-+ return 0;
-+
-+ if (strcmp(model, "RB333") == 0) {
-+ rb333model = 1;
-+ return 1;
-+ }
-+
-+ if (strcmp(model, "RB600") == 0)
-+ return 1;
-+
-+ return 0;
-+}
-+
-+static void __init rbppc_beeper_init(struct device_node *beeper)
-+{
-+ struct resource res;
-+ struct device_node *gpio;
-+ const unsigned *pin;
-+ const unsigned *gpio_id;
-+
-+ if (of_address_to_resource(beeper, 0, &res)) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: No region specified\n", beeper->full_name);
-+ return;
-+ }
-+
-+ pin = of_get_property(beeper, "gpio", NULL);
-+ if (pin) {
-+ gpio = of_find_node_by_phandle(pin[0]);
-+
-+ if (!gpio) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: GPIO handle %x not found\n", beeper->full_name, pin[0]);
-+ return;
-+ }
-+
-+ gpio_id = of_get_property(gpio, "device-id", NULL);
-+ if (!gpio_id) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: No device-id specified in GPIO\n", beeper->full_name);
-+ return;
-+ }
-+
-+ beeper_gpio_pin[0] = *gpio_id;
-+ beeper_gpio_pin[1] = pin[1];
-+
-+ par_io_config_pin(*gpio_id, pin[1], 1, 0, 0, 0);
-+ } else {
-+ void *sysctl;
-+
-+ sysctl = ioremap_nocache(get_immrbase() + SYSCTL, 0x100);
-+ out_be32(sysctl + SICRL,
-+ in_be32(sysctl + SICRL) | (1 << (31 - 19)));
-+ iounmap(sysctl);
-+ }
-+
-+ gtm = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ beeper_irq = irq_of_parse_and_map(beeper, 0);
-+ if (beeper_irq != NO_IRQ) {
-+ int e = request_irq(beeper_irq, rbppc_timer_irq, 0, "beeper", NULL);
-+ if (e) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Request of beeper irq failed!\n", beeper->full_name);
-+ }
-+ }
-+}
-+
-+#define SBIT(x) (0x80000000 >> (x))
-+#define DBIT(x, y) ((y) << (32 - (((x % 16) + 1) * 2)))
-+
-+#define GPIO_DIR_RB333(x) ((x) + (0x1408 >> 2))
-+#define GPIO_DATA_RB333(x) ((x) + (0x1404 >> 2))
-+
-+#define SICRL_RB600(x) ((x) + (0x114 >> 2))
-+#define GPIO_DIR_RB600(x) ((x) + (0xc00 >> 2))
-+#define GPIO_DATA_RB600(x) ((x) + (0xc08 >> 2))
-+
-+static void rbppc_restart(char *cmd)
-+{
-+ __be32 __iomem *reg;
-+ unsigned rb_model;
-+ struct device_node *root;
-+ unsigned int size;
-+
-+ root = of_find_node_by_path("/");
-+ if (root) {
-+ const char *prop = (char *) of_get_property(root, "model", &size);
-+ rb_model = prop[sizeof("RB") - 1] - '0';
-+ of_node_put(root);
-+ switch (rb_model) {
-+ case 3:
-+ reg = ioremap(get_immrbase(), 0x2000);
-+ local_irq_disable();
-+ out_be32(GPIO_DIR_RB333(reg),
-+ (in_be32(GPIO_DIR_RB333(reg)) & ~DBIT(4, 3)) | DBIT(4, 1));
-+ out_be32(GPIO_DATA_RB333(reg), in_be32(GPIO_DATA_RB333(reg)) & ~SBIT(4));
-+ break;
-+ case 6:
-+ reg = ioremap(get_immrbase(), 0x1000);
-+ local_irq_disable();
-+ out_be32(SICRL_RB600(reg), in_be32(SICRL_RB600(reg)) & ~0x00800000);
-+ out_be32(GPIO_DIR_RB600(reg), in_be32(GPIO_DIR_RB600(reg)) | SBIT(2));
-+ out_be32(GPIO_DATA_RB600(reg), in_be32(GPIO_DATA_RB600(reg)) & ~SBIT(2));
-+ break;
-+ default:
-+ mpc83xx_restart(cmd);
-+ break;
-+ }
-+ }
-+ else mpc83xx_restart(cmd);
-+
-+ for (;;) ;
-+}
-+
-+static void rbppc_halt(void)
-+{
-+ while (1);
-+}
-+
-+static struct of_device_id rbppc_ids[] = {
-+ { .type = "soc", },
-+ { .compatible = "soc", },
-+ { .compatible = "simple-bus", },
-+ { .type = "qe", },
-+ { .compatible = "fsl,qe", },
-+ { .compatible = "gianfar", },
-+ { },
-+};
-+
-+static int __init rbppc_declare_of_platform_devices(void)
-+{
-+ struct device_node *np;
-+ unsigned idx;
-+
-+ of_platform_bus_probe(NULL, rbppc_ids, NULL);
-+
-+ np = of_find_node_by_type(NULL, "mdio");
-+ if (np) {
-+ unsigned len;
-+ unsigned *res;
-+ const unsigned *eres;
-+ struct device_node *ep;
-+
-+ ep = of_find_compatible_node(NULL, "network", "ucc_geth");
-+ if (ep) {
-+ eres = of_get_property(ep, "reg", &len);
-+ res = (unsigned *) of_get_property(np, "reg", &len);
-+ if (res && eres) {
-+ res[0] = eres[0] + 0x120;
-+ }
-+ }
-+ }
-+
-+ np = of_find_node_by_name(NULL, "nand");
-+ if (np) {
-+ of_platform_device_create(np, "nand", NULL);
-+ }
-+
-+ idx = 0;
-+ for_each_node_by_type(np, "rb,cf") {
-+ char dev_name[12];
-+ snprintf(dev_name, sizeof(dev_name), "cf.%u", idx);
-+ of_platform_device_create(np, dev_name, NULL);
-+ ++idx;
-+ }
-+
-+ np = of_find_node_by_name(NULL, "beeper");
-+ if (np) {
-+ rbppc_beeper_init(np);
-+ }
-+
-+ return 0;
-+}
-+machine_device_initcall(rb600, rbppc_declare_of_platform_devices);
-+
-+define_machine(rb600) {
-+ .name = "MikroTik RouterBOARD 333/600 series",
-+ .probe = rbppc_probe,
-+ .setup_arch = rbppc_setup_arch,
-+ .init_IRQ = rbppc_init_IRQ,
-+ .get_irq = ipic_get_irq,
-+ .restart = rbppc_restart,
-+ .halt = rbppc_halt,
-+ .time_init = mpc83xx_time_init,
-+ .calibrate_decr = generic_calibrate_decr,
-+};
-+
-+static void fixup_pcibridge(struct pci_dev *dev)
-+{
-+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
-+ /* let the kernel itself set right memory windows */
-+ pci_write_config_word(dev, PCI_MEMORY_BASE, 0);
-+ pci_write_config_word(dev, PCI_MEMORY_LIMIT, 0);
-+ pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0);
-+ pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
-+ pci_write_config_byte(dev, PCI_IO_BASE, 0);
-+ pci_write_config_byte(dev, PCI_IO_LIMIT, 4 << 4);
-+
-+ pci_write_config_byte(
-+ dev, PCI_COMMAND,
-+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
-+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
-+ }
-+}
-+
-+
-+static void fixup_rb604(struct pci_dev *dev)
-+{
-+ pci_write_config_byte(dev, 0xC0, 0x01);
-+}
-+
-+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_pcibridge)
-+DECLARE_PCI_FIXUP_HEADER(0x3388, 0x0021, fixup_rb604)
+++ /dev/null
---- a/arch/powerpc/kernel/Makefile
-+++ b/arch/powerpc/kernel/Makefile
-@@ -116,9 +116,11 @@ obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
- obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
- obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
-
-+ifneq ($(CONFIG_RB_IOMAP),y)
- ifneq ($(CONFIG_PPC_INDIRECT_PIO),y)
- obj-y += iomap.o
- endif
-+endif
-
- obj64-$(CONFIG_PPC_TRANSACTIONAL_MEM) += tm.o
-
---- a/arch/powerpc/platforms/83xx/Makefile
-+++ b/arch/powerpc/platforms/83xx/Makefile
-@@ -7,6 +7,7 @@ obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mp
- obj-$(CONFIG_MPC830x_RDB) += mpc830x_rdb.o
- obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o
- obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o
-+obj-$(CONFIG_RB_PPC) += rbppc.o
- obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
- obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
- obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o
---- a/arch/powerpc/platforms/Kconfig
-+++ b/arch/powerpc/platforms/Kconfig
-@@ -212,6 +212,10 @@ config PPC_INDIRECT_MMIO
- config PPC_IO_WORKAROUNDS
- bool
-
-+config RB_IOMAP
-+ bool
-+ default y if RB_PPC
-+
- source "drivers/cpufreq/Kconfig"
-
- menu "CPUIdle driver"
---- a/arch/powerpc/sysdev/Makefile
-+++ b/arch/powerpc/sysdev/Makefile
-@@ -73,3 +73,6 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -
- obj-$(CONFIG_PPC_XICS) += xics/
-
- obj-$(CONFIG_GE_FPGA) += ge/
-+
-+obj-$(CONFIG_RB_IOMAP) += rb_iomap.o
-+
---- /dev/null
-+++ b/arch/powerpc/sysdev/rb_iomap.c
-@@ -0,0 +1,204 @@
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+#include <linux/mm.h>
-+#include <asm/io.h>
-+
-+#define LOCALBUS_START 0x40000000
-+#define LOCALBUS_MASK 0x007fffff
-+#define LOCALBUS_REGMASK 0x001fffff
-+
-+static void __iomem *localbus_base;
-+
-+static inline int is_localbus(void __iomem *addr)
-+{
-+ return ((unsigned) addr & ~LOCALBUS_MASK) == LOCALBUS_START;
-+}
-+
-+static inline unsigned localbus_regoff(unsigned reg) {
-+ return (reg << 16) | (((reg ^ 8) & 8) << 17);
-+}
-+
-+static inline void __iomem *localbus_addr(void __iomem *addr)
-+{
-+ return localbus_base
-+ + ((unsigned) addr & LOCALBUS_MASK & ~LOCALBUS_REGMASK)
-+ + localbus_regoff((unsigned) addr & LOCALBUS_REGMASK);
-+}
-+
-+unsigned int ioread8(void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ return in_be16(localbus_addr(addr)) >> 8;
-+ return readb(addr);
-+}
-+EXPORT_SYMBOL(ioread8);
-+
-+unsigned int ioread16(void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ return le16_to_cpu(in_be16(localbus_addr(addr)));
-+ return readw(addr);
-+}
-+EXPORT_SYMBOL(ioread16);
-+
-+unsigned int ioread16be(void __iomem *addr)
-+{
-+ return in_be16(addr);
-+}
-+EXPORT_SYMBOL(ioread16be);
-+
-+unsigned int ioread32(void __iomem *addr)
-+{
-+ return readl(addr);
-+}
-+EXPORT_SYMBOL(ioread32);
-+
-+unsigned int ioread32be(void __iomem *addr)
-+{
-+ return in_be32(addr);
-+}
-+EXPORT_SYMBOL(ioread32be);
-+
-+void iowrite8(u8 val, void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ out_be16(localbus_addr(addr), ((u16) val) << 8);
-+ else
-+ writeb(val, addr);
-+}
-+EXPORT_SYMBOL(iowrite8);
-+
-+void iowrite16(u16 val, void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ out_be16(localbus_addr(addr), cpu_to_le16(val));
-+ else
-+ writew(val, addr);
-+}
-+EXPORT_SYMBOL(iowrite16);
-+
-+void iowrite16be(u16 val, void __iomem *addr)
-+{
-+ out_be16(addr, val);
-+}
-+EXPORT_SYMBOL(iowrite16be);
-+
-+void iowrite32(u32 val, void __iomem *addr)
-+{
-+ writel(val, addr);
-+}
-+EXPORT_SYMBOL(iowrite32);
-+
-+void iowrite32be(u32 val, void __iomem *addr)
-+{
-+ out_be32(addr, val);
-+}
-+EXPORT_SYMBOL(iowrite32be);
-+
-+void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ u8 *buf = dst;
-+
-+ for (i = 0; i < count; ++i) {
-+ *buf++ = in_be16(laddr) >> 8;
-+ }
-+ } else {
-+ _insb((u8 __iomem *) addr, dst, count);
-+ }
-+}
-+EXPORT_SYMBOL(ioread8_rep);
-+
-+void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ u16 *buf = dst;
-+
-+ for (i = 0; i < count; ++i) {
-+ *buf++ = in_be16(laddr);
-+ }
-+ } else {
-+ _insw_ns((u16 __iomem *) addr, dst, count);
-+ }
-+}
-+EXPORT_SYMBOL(ioread16_rep);
-+
-+void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
-+{
-+ _insl_ns((u32 __iomem *) addr, dst, count);
-+}
-+EXPORT_SYMBOL(ioread32_rep);
-+
-+void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ const u8 *buf = src;
-+
-+ for (i = 0; i < count; ++i) {
-+ out_be16(laddr, ((u16) *buf++) << 8);
-+ }
-+ } else {
-+ _outsb((u8 __iomem *) addr, src, count);
-+ }
-+}
-+EXPORT_SYMBOL(iowrite8_rep);
-+
-+void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ const u16 *buf = src;
-+
-+ for (i = 0; i < count; ++i) {
-+ out_be16(laddr, *buf++);
-+ }
-+ } else {
-+ _outsw_ns((u16 __iomem *) addr, src, count);
-+ }
-+}
-+EXPORT_SYMBOL(iowrite16_rep);
-+
-+void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
-+{
-+ _outsl_ns((u32 __iomem *) addr, src, count);
-+}
-+EXPORT_SYMBOL(iowrite32_rep);
-+
-+void __iomem *ioport_map(unsigned long port, unsigned int len)
-+{
-+ return (void __iomem *) (port + _IO_BASE);
-+}
-+EXPORT_SYMBOL(ioport_unmap);
-+
-+void ioport_unmap(void __iomem *addr)
-+{
-+ /* Nothing to do */
-+}
-+EXPORT_SYMBOL(ioport_map);
-+
-+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-+{
-+ /* Nothing to do */
-+}
-+EXPORT_SYMBOL(pci_iounmap);
-+
-+void __iomem *localbus_map(unsigned long addr, unsigned int len)
-+{
-+ if (!localbus_base)
-+ localbus_base = ioremap(addr & ~LOCALBUS_MASK,
-+ LOCALBUS_MASK + 1);
-+ return (void *) (LOCALBUS_START + (addr & LOCALBUS_MASK));
-+}
-+EXPORT_SYMBOL(localbus_map);
-+
-+void localbus_unmap(void __iomem *addr)
-+{
-+}
-+EXPORT_SYMBOL(localbus_unmap);
---- a/arch/powerpc/platforms/83xx/Kconfig
-+++ b/arch/powerpc/platforms/83xx/Kconfig
-@@ -44,6 +44,7 @@ config RB_PPC
- select QUICC_ENGINE
- select PPC_MPC832x
- select PPC_MPC834x
-+ select RB_IOMAP
- help
- This option enables support for MikroTik RouterBOARD 333/600 series boards.
-
+++ /dev/null
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -963,5 +963,12 @@ config PATA_LEGACY
-
- If unsure, say N.
-
-+config PATA_RB_PPC
-+ tristate "MikroTik RB600 PATA support"
-+ depends on RB_PPC
-+ help
-+ This option enables support for PATA devices on MikroTik RouterBOARD
-+ 600 series boards.
-+
- endif # ATA_SFF
- endif # ATA
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -93,6 +93,7 @@ obj-$(CONFIG_PATA_PALMLD) += pata_palmld
- obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
- obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
-+obj-$(CONFIG_PATA_RB_PPC) += pata_rbppc_cf.o
- obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
- obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
-
---- /dev/null
-+++ b/drivers/ata/pata_rbppc_cf.c
-@@ -0,0 +1,701 @@
-+/*
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <scsi/scsi_host.h>
-+#include <linux/libata.h>
-+#include <linux/of_platform.h>
-+#include <linux/ata_platform.h>
-+#include <linux/slab.h>
-+#include <linux/of_address.h>
-+#include <linux/of_irq.h>
-+
-+#define DEBUG_UPM 0
-+
-+#define DRV_NAME "pata_rbppc_cf"
-+#define DRV_VERSION "0.0.2"
-+
-+#define DEV2SEL_OFFSET 0x00100000
-+
-+#define IMMR_LBCFG_OFFSET 0x00005000
-+#define IMMR_LBCFG_SIZE 0x00001000
-+
-+#define LOCAL_BUS_MCMR 0x00000078
-+#define MxMR_OP_MASK 0x30000000
-+#define MxMR_OP_NORMAL 0x00000000
-+#define MxMR_OP_WRITE 0x10000000
-+#define MxMR_OP_READ 0x20000000
-+#define MxMR_OP_RUN 0x30000000
-+#define MxMR_LUPWAIT_LOW 0x08000000
-+#define MxMR_LUPWAIT_HIGH 0x00000000
-+#define MxMR_LUPWAIT_ENABLE 0x00040000
-+#define MxMR_RLF_MASK 0x0003c000
-+#define MxMR_RLF_SHIFT 14
-+#define MxMR_WLF_MASK 0x00003c00
-+#define MxMR_WLF_SHIFT 10
-+#define MxMR_MAD_MASK 0x0000003f
-+#define LOCAL_BUS_MDR 0x00000088
-+#define LOCAL_BUS_LCRR 0x000000D4
-+#define LCRR_CLKDIV_MASK 0x0000000f
-+
-+#define LOOP_SIZE 4
-+
-+#define UPM_READ_SINGLE_OFFSET 0x00
-+#define UPM_WRITE_SINGLE_OFFSET 0x18
-+#define UPM_DATA_SIZE 0x40
-+
-+#define LBT_CPUIN_MIN 0
-+#define LBT_CPUOUT_MIN 1
-+#define LBT_CPUOUT_MAX 2
-+#define LBT_EXTDEL_MIN 3
-+#define LBT_EXTDEL_MAX 4
-+#define LBT_SIZE 5
-+
-+/* UPM machine configuration bits */
-+#define N_BASE 0x00f00000
-+#define N_CS 0xf0000000
-+#define N_CS_H1 0xc0000000
-+#define N_CS_H2 0x30000000
-+#define N_WE 0x0f000000
-+#define N_WE_H1 0x0c000000
-+#define N_WE_H2 0x03000000
-+#define N_OE 0x00030000
-+#define N_OE_H1 0x00020000
-+#define N_OE_H2 0x00010000
-+#define WAEN 0x00001000
-+#define REDO_2 0x00000100
-+#define REDO_3 0x00000200
-+#define REDO_4 0x00000300
-+#define LOOP 0x00000080
-+#define NA 0x00000008
-+#define UTA 0x00000004
-+#define LAST 0x00000001
-+
-+#define REDO_VAL(mult) (REDO_2 * ((mult) - 1))
-+#define REDO_MAX_MULT 4
-+
-+#define READ_BASE (N_BASE | N_WE)
-+#define WRITE_BASE (N_BASE | N_OE)
-+#define EMPTY (N_BASE | N_CS | N_OE | N_WE | LAST)
-+
-+#define EOF_UPM_SETTINGS 0
-+#define ANOTHER_TIMING 1
-+
-+#define OA_CPUIN_MIN 0x01
-+#define OA_CPUOUT_MAX 0x02
-+#define OD_CPUOUT_MIN 0x04
-+#define OA_CPUOUT_DELTA 0x06
-+#define OA_EXTDEL_MAX 0x08
-+#define OD_EXTDEL_MIN 0x10
-+#define OA_EXTDEL_DELTA 0x18
-+#define O_MIN_CYCLE_TIME 0x20
-+#define O_MINUS_PREV 0x40
-+#define O_HALF_CYCLE 0x80
-+
-+extern void __iomem *localbus_map(unsigned long addr, unsigned int len);
-+extern void localbus_unmap(void __iomem *addr);
-+
-+struct rbppc_cf_info {
-+ unsigned lbcfg_addr;
-+ unsigned clk_time_ps;
-+ int cur_mode;
-+ u32 lb_timings[LBT_SIZE];
-+};
-+static struct rbppc_cf_info *rbinfo = NULL;
-+
-+struct upm_setting {
-+ unsigned value;
-+ unsigned ns[7];
-+ unsigned clk_minus;
-+ unsigned group_size;
-+ unsigned options;
-+};
-+
-+static const struct upm_setting cfUpmReadSingle[] = {
-+ { READ_BASE | N_OE,
-+ /* t1 - ADDR setup time */
-+ { 70, 50, 30, 30, 25, 15, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { READ_BASE | N_OE_H1,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { READ_BASE,
-+ /* t2 - OE0 time */
-+ { 290, 290, 290, 80, 70, 65, 55 }, 0, 2, (OA_CPUOUT_MAX |
-+ OA_CPUIN_MIN) },
-+ { READ_BASE | WAEN,
-+ { 1, 1, 1, 1, 1, 0, 0 }, 0, 0, 0 },
-+ { READ_BASE | UTA,
-+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
-+ { READ_BASE | N_OE,
-+ /* t9 - ADDR hold time */
-+ { 20, 15, 10, 10, 10, 10, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OD_EXTDEL_MIN) },
-+ { READ_BASE | N_OE | N_CS_H2,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { READ_BASE | N_OE | N_CS,
-+ /* t6Z -IORD data tristate */
-+ { 30, 30, 30, 30, 30, 20, 20 }, 1, 1, O_MINUS_PREV },
-+ { ANOTHER_TIMING,
-+ /* t2i -IORD recovery time */
-+ { 0, 0, 0, 70, 25, 25, 20 }, 2, 0, 0 },
-+ { ANOTHER_TIMING,
-+ /* CS 0 -> 1 MAX */
-+ { 0, 0, 0, 0, 0, 0, 0 }, 1, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { READ_BASE | N_OE | N_CS | LAST,
-+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
-+ { EOF_UPM_SETTINGS,
-+ /* min total cycle time - includes turnaround and ALE cycle */
-+ { 600, 383, 240, 180, 120, 100, 80 }, 2, 0, O_MIN_CYCLE_TIME },
-+};
-+
-+static const struct upm_setting cfUpmWriteSingle[] = {
-+ { WRITE_BASE | N_WE,
-+ /* t1 - ADDR setup time */
-+ { 70, 50, 30, 30, 25, 15, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { WRITE_BASE | N_WE_H1,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { WRITE_BASE,
-+ /* t2 - WE0 time */
-+ { 290, 290, 290, 80, 70, 65, 55 }, 0, 1, OA_CPUOUT_DELTA },
-+ { WRITE_BASE | WAEN,
-+ { 1, 1, 1, 1, 1, 0, 0 }, 0, 0, 0 },
-+ { WRITE_BASE | N_WE,
-+ /* t9 - ADDR hold time */
-+ { 20, 15, 10, 10, 10, 10, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OD_EXTDEL_MIN) },
-+ { WRITE_BASE | N_WE | N_CS_H2,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { WRITE_BASE | N_WE | N_CS,
-+ /* t4 - DATA hold time */
-+ { 30, 20, 15, 10, 10, 10, 10 }, 0, 1, O_MINUS_PREV },
-+ { ANOTHER_TIMING,
-+ /* t2i -IOWR recovery time */
-+ { 0, 0, 0, 70, 25, 25, 20 }, 1, 0, 0 },
-+ { ANOTHER_TIMING,
-+ /* CS 0 -> 1 MAX */
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { WRITE_BASE | N_WE | N_CS | UTA | LAST,
-+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
-+ /* min total cycle time - includes ALE cycle */
-+ { EOF_UPM_SETTINGS,
-+ { 600, 383, 240, 180, 120, 100, 80 }, 1, 0, O_MIN_CYCLE_TIME },
-+};
-+
-+static u8 rbppc_cf_check_status(struct ata_port *ap) {
-+ u8 val = ioread8(ap->ioaddr.status_addr);
-+ if (val == 0xF9)
-+ val = 0x7F;
-+ return val;
-+}
-+
-+static u8 rbppc_cf_check_altstatus(struct ata_port *ap) {
-+ u8 val = ioread8(ap->ioaddr.altstatus_addr);
-+ if (val == 0xF9)
-+ val = 0x7F;
-+ return val;
-+}
-+
-+static void rbppc_cf_dummy_noret(struct ata_port *ap) { }
-+static int rbppc_cf_dummy_ret0(struct ata_port *ap) { return 0; }
-+
-+static int ps2clk(int ps, unsigned clk_time_ps) {
-+ int psMaxOver;
-+ if (ps <= 0) return 0;
-+
-+ /* round down if <= 2% over clk border, but no more than 1/4 clk cycle */
-+ psMaxOver = ps * 2 / 100;
-+ if (4 * psMaxOver > clk_time_ps) {
-+ psMaxOver = clk_time_ps / 4;
-+ }
-+ return (ps + clk_time_ps - 1 - psMaxOver) / clk_time_ps;
-+}
-+
-+static int upm_gen_ps_table(const struct upm_setting *upm,
-+ int mode, struct rbppc_cf_info *info,
-+ int *psFinal) {
-+ int uidx;
-+ int lastUpmValIdx = 0;
-+ int group_start_idx = -1;
-+ int group_left_num = -1;
-+ int clk_time_ps = info->clk_time_ps;
-+
-+ for (uidx = 0; upm[uidx].value != EOF_UPM_SETTINGS; ++uidx) {
-+ const struct upm_setting *us = upm + uidx;
-+ unsigned opt = us->options;
-+ int ps = us->ns[mode] * 1000 - us->clk_minus * clk_time_ps;
-+
-+ if (opt & OA_CPUIN_MIN) ps += info->lb_timings[LBT_CPUIN_MIN];
-+ if (opt & OD_CPUOUT_MIN) ps -= info->lb_timings[LBT_CPUOUT_MIN];
-+ if (opt & OA_CPUOUT_MAX) ps += info->lb_timings[LBT_CPUOUT_MAX];
-+ if (opt & OD_EXTDEL_MIN) ps -= info->lb_timings[LBT_EXTDEL_MIN];
-+ if (opt & OA_EXTDEL_MAX) ps += info->lb_timings[LBT_EXTDEL_MAX];
-+
-+ if (us->value == ANOTHER_TIMING) {
-+ /* use longest timing from alternatives */
-+ if (psFinal[lastUpmValIdx] < ps) {
-+ psFinal[lastUpmValIdx] = ps;
-+ }
-+ ps = 0;
-+ }
-+ else {
-+ if (us->group_size) {
-+ group_start_idx = uidx;
-+ group_left_num = us->group_size;
-+ }
-+ else if (group_left_num > 0) {
-+ /* group time is divided on all group members */
-+ int clk = ps2clk(ps, clk_time_ps);
-+ psFinal[group_start_idx] -= clk * clk_time_ps;
-+ --group_left_num;
-+ }
-+ if ((opt & O_MINUS_PREV) && lastUpmValIdx > 0) {
-+ int clk = ps2clk(psFinal[lastUpmValIdx],
-+ clk_time_ps);
-+ ps -= clk * clk_time_ps;
-+ }
-+ lastUpmValIdx = uidx;
-+ }
-+ psFinal[uidx] = ps;
-+ }
-+ return uidx;
-+}
-+
-+static int free_half(int ps, int clk, int clk_time_ps) {
-+ if (clk < 2) return 0;
-+ return (clk * clk_time_ps - ps) * 2 >= clk_time_ps;
-+}
-+
-+static void upm_gen_clk_table(const struct upm_setting *upm,
-+ int mode, int clk_time_ps,
-+ int max_uidx, const int *psFinal, int *clkFinal) {
-+ int clk_cycle_time;
-+ int clk_total;
-+ int uidx;
-+
-+ /* convert picoseconds to clocks */
-+ clk_total = 0;
-+ for (uidx = 0; uidx < max_uidx; ++uidx) {
-+ int clk = ps2clk(psFinal[uidx], clk_time_ps);
-+ clkFinal[uidx] = clk;
-+ clk_total += clk;
-+ }
-+
-+ /* check possibility of half cycle usage */
-+ for (uidx = 1; uidx < max_uidx - 1; ++uidx) {
-+ if ((upm[uidx].options & O_HALF_CYCLE) &&
-+ free_half(psFinal[uidx - 1], clkFinal[uidx - 1],
-+ clk_time_ps) &&
-+ free_half(psFinal[uidx + 1], clkFinal[uidx + 1],
-+ clk_time_ps)) {
-+ ++clkFinal[uidx];
-+ --clkFinal[uidx - 1];
-+ --clkFinal[uidx + 1];
-+ }
-+ }
-+
-+ if ((upm[max_uidx].options & O_MIN_CYCLE_TIME) == 0) return;
-+
-+ /* check cycle time, adjust timings if needed */
-+ clk_cycle_time = (ps2clk(upm[max_uidx].ns[mode] * 1000, clk_time_ps) -
-+ upm[max_uidx].clk_minus);
-+ uidx = 0;
-+ while (clk_total < clk_cycle_time) {
-+ /* extend all timings in round-robin to match cycle time */
-+ if (clkFinal[uidx]) {
-+#if DEBUG_UPM
-+ printk(KERN_INFO "extending %u by 1 clk\n", uidx);
-+#endif
-+ ++clkFinal[uidx];
-+ ++clk_total;
-+ }
-+ ++uidx;
-+ if (uidx == max_uidx) uidx = 0;
-+ }
-+}
-+
-+static void add_data_val(unsigned val, int *clkLeft, int maxClk,
-+ unsigned *data, int *dataIdx) {
-+ if (*clkLeft == 0) return;
-+
-+ if (maxClk == 0 && *clkLeft >= LOOP_SIZE * 2) {
-+ int times;
-+ int times1;
-+ int times2;
-+
-+ times = *clkLeft / LOOP_SIZE;
-+ if (times > REDO_MAX_MULT * 2) times = REDO_MAX_MULT * 2;
-+ times1 = times / 2;
-+ times2 = times - times1;
-+
-+ val |= LOOP;
-+ data[*dataIdx] = val | REDO_VAL(times1);
-+ ++(*dataIdx);
-+ data[*dataIdx] = val | REDO_VAL(times2);
-+ ++(*dataIdx);
-+
-+ *clkLeft -= times * LOOP_SIZE;
-+ return;
-+ }
-+
-+ if (maxClk < 1 || maxClk > REDO_MAX_MULT) maxClk = REDO_MAX_MULT;
-+ if (*clkLeft < maxClk) maxClk = *clkLeft;
-+
-+ *clkLeft -= maxClk;
-+ val |= REDO_VAL(maxClk);
-+
-+ data[*dataIdx] = val;
-+ ++(*dataIdx);
-+}
-+
-+static int upm_gen_final_data(const struct upm_setting *upm,
-+ int max_uidx, int *clkFinal, unsigned *data) {
-+ int dataIdx;
-+ int uidx;
-+
-+ dataIdx = 0;
-+ for (uidx = 0; uidx < max_uidx; ++uidx) {
-+ int clk = clkFinal[uidx];
-+ while (clk > 0) {
-+ add_data_val(upm[uidx].value, &clk, 0,
-+ data, &dataIdx);
-+ }
-+ }
-+ return dataIdx;
-+}
-+
-+static int conv_upm_table(const struct upm_setting *upm,
-+ int mode, struct rbppc_cf_info *info,
-+ unsigned *data) {
-+#if DEBUG_UPM
-+ int uidx;
-+#endif
-+ int psFinal[32];
-+ int clkFinal[32];
-+ int max_uidx;
-+ int data_len;
-+
-+ max_uidx = upm_gen_ps_table(upm, mode, info, psFinal);
-+
-+ upm_gen_clk_table(upm, mode, info->clk_time_ps, max_uidx,
-+ psFinal, clkFinal);
-+
-+#if DEBUG_UPM
-+ /* dump out debug info */
-+ for (uidx = 0; uidx < max_uidx; ++uidx) {
-+ if (clkFinal[uidx]) {
-+ printk(KERN_INFO "idx %d val %08x clk %d ps %d\n",
-+ uidx, upm[uidx].value,
-+ clkFinal[uidx], psFinal[uidx]);
-+ }
-+ }
-+#endif
-+
-+ data_len = upm_gen_final_data(upm, max_uidx, clkFinal, data);
-+
-+#if DEBUG_UPM
-+ for (uidx = 0; uidx < data_len; ++uidx) {
-+ printk(KERN_INFO "cf UPM x result: idx %d val %08x\n",
-+ uidx, data[uidx]);
-+ }
-+#endif
-+ return 0;
-+}
-+
-+static int gen_upm_data(int mode, struct rbppc_cf_info *info, unsigned *data) {
-+ int i;
-+
-+ for (i = 0; i < UPM_DATA_SIZE; ++i) {
-+ data[i] = EMPTY;
-+ }
-+
-+ if (conv_upm_table(cfUpmReadSingle, mode, info, data + UPM_READ_SINGLE_OFFSET)) {
-+ return -1;
-+ }
-+ if (conv_upm_table(cfUpmWriteSingle, mode, info, data + UPM_WRITE_SINGLE_OFFSET)) {
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+static void rbppc_cf_program_upm(void *upmMemAddr, volatile void *lbcfg_mxmr, volatile void *lbcfg_mdr, const unsigned *upmData, unsigned offset, unsigned len) {
-+ unsigned i;
-+ unsigned mxmr;
-+
-+ mxmr = in_be32(lbcfg_mxmr);
-+ mxmr &= ~(MxMR_OP_MASK | MxMR_MAD_MASK);
-+ mxmr |= (MxMR_OP_WRITE | offset);
-+ out_be32(lbcfg_mxmr, mxmr);
-+ in_be32(lbcfg_mxmr); /* flush MxMR write */
-+
-+ for (i = 0; i < len; ++i) {
-+ int to;
-+ unsigned data = upmData[i + offset];
-+ out_be32(lbcfg_mdr, data);
-+ in_be32(lbcfg_mdr); /* flush MDR write */
-+
-+ iowrite8(1, upmMemAddr); /* dummy write to any CF addr */
-+
-+ /* wait for dummy write to complete */
-+ for (to = 10000; to >= 0; --to) {
-+ mxmr = in_be32(lbcfg_mxmr);
-+ if (((mxmr ^ (i + 1)) & MxMR_MAD_MASK) == 0) {
-+ break;
-+ }
-+ if (to == 0) {
-+ printk(KERN_ERR "rbppc_cf_program_upm: UPMx program error at 0x%x: Timeout\n", i);
-+ }
-+ }
-+ }
-+ mxmr &= ~(MxMR_OP_MASK | MxMR_RLF_MASK | MxMR_WLF_MASK);
-+ mxmr |= (MxMR_OP_NORMAL | (LOOP_SIZE << MxMR_RLF_SHIFT) | (LOOP_SIZE << MxMR_WLF_SHIFT));
-+ out_be32(lbcfg_mxmr, mxmr);
-+}
-+
-+static int rbppc_cf_update_piomode(struct ata_port *ap, int mode) {
-+ struct rbppc_cf_info *info = (struct rbppc_cf_info *)ap->host->private_data;
-+ void *lbcfgBase;
-+ unsigned upmData[UPM_DATA_SIZE];
-+
-+ if (gen_upm_data(mode, info, upmData)) {
-+ return -1;
-+ }
-+
-+ lbcfgBase = ioremap_nocache(info->lbcfg_addr, IMMR_LBCFG_SIZE);
-+
-+ rbppc_cf_program_upm(ap->ioaddr.cmd_addr, ((char *)lbcfgBase) + LOCAL_BUS_MCMR, ((char *)lbcfgBase) + LOCAL_BUS_MDR, upmData, 0, UPM_DATA_SIZE);
-+ iounmap(lbcfgBase);
-+ return 0;
-+}
-+
-+static void rbppc_cf_set_piomode(struct ata_port *ap, struct ata_device *adev)
-+{
-+ struct rbppc_cf_info *info = (struct rbppc_cf_info *)ap->host->private_data;
-+ int mode = adev->pio_mode - XFER_PIO_0;
-+
-+ DPRINTK("rbppc_cf_set_piomode: PIO %d\n", mode);
-+ if (mode < 0) mode = 0;
-+ if (mode > 6) mode = 6;
-+
-+ if (info->cur_mode < 0 || info->cur_mode > mode) {
-+ if (rbppc_cf_update_piomode(ap, mode) == 0) {
-+ printk(KERN_INFO "rbppc_cf_set_piomode: PIO mode changed to %d\n", mode);
-+ info->cur_mode = mode;
-+ }
-+ }
-+}
-+
-+static struct scsi_host_template rbppc_cf_sht = {
-+ ATA_BASE_SHT(DRV_NAME),
-+};
-+
-+static struct ata_port_operations rbppc_cf_port_ops = {
-+ .inherits = &ata_bmdma_port_ops,
-+
-+ .sff_check_status = rbppc_cf_check_status,
-+ .sff_check_altstatus = rbppc_cf_check_altstatus,
-+
-+ .set_piomode = rbppc_cf_set_piomode,
-+
-+ .port_start = rbppc_cf_dummy_ret0,
-+
-+ .sff_irq_clear = rbppc_cf_dummy_noret,
-+};
-+
-+static int rbppc_cf_init_info(struct platform_device *pdev, struct rbppc_cf_info *info) {
-+ struct device_node *np;
-+ struct resource res;
-+ const u32 *u32ptr;
-+ void *lbcfgBase;
-+ void *lbcfg_lcrr;
-+ unsigned lbc_clk_khz;
-+ unsigned lbc_extra_divider = 1;
-+ unsigned ccb_freq_hz;
-+ unsigned lb_div;
-+
-+ u32ptr = of_get_property(pdev->dev.of_node, "lbc_extra_divider", NULL);
-+ if (u32ptr && *u32ptr) {
-+ lbc_extra_divider = *u32ptr;
-+#if DEBUG_UPM
-+ printk(KERN_INFO "rbppc_cf_init_info: LBC extra divider %u\n",
-+ lbc_extra_divider);
-+#endif
-+ }
-+
-+ np = of_find_node_by_type(NULL, "serial");
-+ if (!np) {
-+ printk(KERN_ERR "rbppc_cf_init_info: No serial node found\n");
-+ return -1;
-+ }
-+ u32ptr = of_get_property(np, "clock-frequency", NULL);
-+ if (u32ptr == 0 || *u32ptr == 0) {
-+ printk(KERN_ERR "rbppc_cf_init_info: Serial does not have clock-frequency\n");
-+ of_node_put(np);
-+ return -1;
-+ }
-+ ccb_freq_hz = *u32ptr;
-+ of_node_put(np);
-+
-+ np = of_find_node_by_type(NULL, "soc");
-+ if (!np) {
-+ printk(KERN_ERR "rbppc_cf_init_info: No soc node found\n");
-+ return -1;
-+ }
-+ if (of_address_to_resource(np, 0, &res)) {
-+ printk(KERN_ERR "rbppc_cf_init_info: soc does not have resource\n");
-+ of_node_put(np);
-+ return -1;
-+ }
-+ info->lbcfg_addr = res.start + IMMR_LBCFG_OFFSET;
-+ of_node_put(np);
-+
-+ lbcfgBase = ioremap_nocache(info->lbcfg_addr, IMMR_LBCFG_SIZE);
-+ lbcfg_lcrr = ((char*)lbcfgBase) + LOCAL_BUS_LCRR;
-+ lb_div = (in_be32(lbcfg_lcrr) & LCRR_CLKDIV_MASK) * lbc_extra_divider;
-+ iounmap(lbcfgBase);
-+
-+ lbc_clk_khz = ccb_freq_hz / (1000 * lb_div);
-+ info->clk_time_ps = 1000000000 / lbc_clk_khz;
-+ printk(KERN_INFO "rbppc_cf_init_info: Using Local-Bus clock %u kHz %u ps\n",
-+ lbc_clk_khz, info->clk_time_ps);
-+
-+ u32ptr = of_get_property(pdev->dev.of_node, "lb-timings", NULL);
-+ if (u32ptr) {
-+ memcpy(info->lb_timings, u32ptr, LBT_SIZE * sizeof(*u32ptr));
-+#if DEBUG_UPM
-+ printk(KERN_INFO "rbppc_cf_init_info: Got LB timings <%u %u %u %u %u>\n",
-+ u32ptr[0], u32ptr[1], u32ptr[2], u32ptr[3], u32ptr[4]);
-+#endif
-+ }
-+ info->cur_mode = -1;
-+ return 0;
-+}
-+
-+static int rbppc_cf_probe(struct platform_device *pdev)
-+{
-+ struct ata_host *host;
-+ struct ata_port *ap;
-+ struct rbppc_cf_info *info = NULL;
-+ struct resource res;
-+ void *baddr;
-+ const u32 *u32ptr;
-+ int irq_level = 0;
-+ int err = -ENOMEM;
-+
-+ printk(KERN_INFO "rbppc_cf_probe: MikroTik RouterBOARD 600 series Compact Flash PATA driver, version " DRV_VERSION "\n");
-+
-+ if (rbinfo == NULL) {
-+ info = kmalloc(sizeof(*info), GFP_KERNEL);
-+ if (info == NULL) {
-+ printk(KERN_ERR "rbppc_cf_probe: Out of memory\n");
-+ goto err_info;
-+ }
-+ memset(info, 0, sizeof(*info));
-+
-+ if (rbppc_cf_init_info(pdev, info)) {
-+ goto err_info;
-+ }
-+ rbinfo = info;
-+ }
-+
-+ u32ptr = of_get_property(pdev->dev.of_node, "interrupt-at-level", NULL);
-+ if (u32ptr) {
-+ irq_level = *u32ptr;
-+ printk(KERN_INFO "rbppc_cf_probe: IRQ level %u\n", irq_level);
-+ }
-+
-+ if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
-+ printk(KERN_ERR "rbppc_cf_probe: No reg property found\n");
-+ goto err_info;
-+ }
-+
-+ host = ata_host_alloc(&pdev->dev, 1);
-+ if (!host)
-+ goto err_info;
-+
-+ baddr = localbus_map(res.start, res.end - res.start + 1);
-+ host->iomap = baddr;
-+ host->private_data = rbinfo;
-+
-+ ap = host->ports[0];
-+ ap->ops = &rbppc_cf_port_ops;
-+ ap->pio_mask = 0x7F; /* PIO modes 0-6 */
-+ ap->mwdma_mask = 0;
-+
-+ ap->ioaddr.cmd_addr = baddr;
-+ ata_sff_std_ports(&ap->ioaddr);
-+ ap->ioaddr.ctl_addr = ap->ioaddr.cmd_addr + 14;
-+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
-+ ap->ioaddr.bmdma_addr = 0;
-+
-+ err = ata_host_activate(
-+ host,
-+ irq_of_parse_and_map(pdev->dev.of_node, 0), ata_sff_interrupt,
-+ irq_level ? IRQF_TRIGGER_HIGH : IRQF_TRIGGER_LOW,
-+ &rbppc_cf_sht);
-+ if (!err) return 0;
-+
-+ localbus_unmap(baddr);
-+err_info:
-+ if (info) {
-+ kfree(info);
-+ rbinfo = NULL;
-+ }
-+ return err;
-+}
-+
-+static int rbppc_cf_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct ata_host *host = dev_get_drvdata(dev);
-+
-+ if (host == NULL) return -1;
-+
-+ ata_host_detach(host);
-+ return 0;
-+}
-+
-+static struct of_device_id rbppc_cf_ids[] = {
-+ { .name = "cf", },
-+ { },
-+};
-+
-+static struct platform_driver rbppc_cf_driver = {
-+ .probe = rbppc_cf_probe,
-+ .remove = rbppc_cf_remove,
-+ .driver = {
-+ .name = "rbppc-cf",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rbppc_cf_ids,
-+ },
-+};
-+
-+static int __init rbppc_init(void)
-+{
-+ return platform_driver_register(&rbppc_cf_driver);
-+}
-+
-+static void __exit rbppc_exit(void)
-+{
-+ platform_driver_unregister(&rbppc_cf_driver);
-+}
-+
-+MODULE_AUTHOR("Mikrotikls SIA");
-+MODULE_AUTHOR("Noah Fontes");
-+MODULE_DESCRIPTION("MikroTik RouterBOARD 600 series Compact Flash PATA driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(rbppc_init);
-+module_exit(rbppc_exit);
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -405,6 +405,13 @@ config MTD_NAND_PLATFORM
- devices. You will need to provide platform-specific functions
- via platform_data.
-
-+config MTD_NAND_RB_PPC
-+ tristate "MikroTik RB333/600 NAND support"
-+ depends on RB_PPC
-+ help
-+ This option enables support for the NAND device on MikroTik
-+ RouterBOARD 333/600 series boards.
-+
- config MTD_NAND_ORION
- tristate "NAND Flash support for Marvell Orion SoC"
- depends on PLAT_ORION
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB_PPC) += rbppc_nand.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
- obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
---- /dev/null
-+++ b/drivers/mtd/nand/rbppc_nand.c
-@@ -0,0 +1,251 @@
-+/*
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_device.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/of_address.h>
-+#include <asm/io.h>
-+
-+#define DRV_NAME "rbppc_nand"
-+#define DRV_VERSION "0.0.2"
-+
-+static struct mtd_info rmtd;
-+static struct nand_chip rnand;
-+
-+struct rbppc_nand_info {
-+ void *gpi;
-+ void *gpo;
-+ void *localbus;
-+
-+ unsigned gpio_rdy;
-+ unsigned gpio_nce;
-+ unsigned gpio_cle;
-+ unsigned gpio_ale;
-+ unsigned gpio_ctrls;
-+};
-+
-+/* We must use the OOB layout from yaffs 1 if we want this to be recognized
-+ * properly. Borrowed from the OpenWRT patches for the RB532.
-+ *
-+ * See <https://dev.openwrt.org/browser/trunk/target/linux/rb532/
-+ * patches-2.6.28/025-rb532_nand_fixup.patch> for more details.
-+ */
-+static struct nand_ecclayout rbppc_nand_oob_16 = {
-+ .eccbytes = 6,
-+ .eccpos = { 8, 9, 10, 13, 14, 15 },
-+ .oobavail = 9,
-+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-+};
-+
-+static struct mtd_partition rbppc_nand_partition_info[] = {
-+ {
-+ name: "kernel",
-+ offset: 0,
-+ size: 4 * 1024 * 1024,
-+ },
-+ {
-+ name: "rootfs",
-+ offset: MTDPART_OFS_NXTBLK,
-+ size: MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static int rbppc_nand_dev_ready(struct mtd_info *mtd) {
-+ struct nand_chip *chip = mtd->priv;
-+ struct rbppc_nand_info *priv = chip->priv;
-+
-+ return in_be32(priv->gpi) & priv->gpio_rdy;
-+}
-+
-+static void rbppc_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) {
-+ struct nand_chip *chip = mtd->priv;
-+ struct rbppc_nand_info *priv = chip->priv;
-+
-+ if (ctrl & NAND_CTRL_CHANGE) {
-+ unsigned val = in_be32(priv->gpo);
-+ if (!(val & priv->gpio_nce)) {
-+ /* make sure Local Bus has done NAND operations */
-+ readb(priv->localbus);
-+ }
-+
-+ if (ctrl & NAND_CLE) {
-+ val |= priv->gpio_cle;
-+ } else {
-+ val &= ~priv->gpio_cle;
-+ }
-+ if (ctrl & NAND_ALE) {
-+ val |= priv->gpio_ale;
-+ } else {
-+ val &= ~priv->gpio_ale;
-+ }
-+ if (!(ctrl & NAND_NCE)) {
-+ val |= priv->gpio_nce;
-+ } else {
-+ val &= ~priv->gpio_nce;
-+ }
-+ out_be32(priv->gpo, val);
-+
-+ /* make sure GPIO output has changed */
-+ val ^= in_be32(priv->gpo);
-+ if (val & priv->gpio_ctrls) {
-+ printk(KERN_ERR "rbppc_nand_hwcontrol: NAND GPO change failed 0x%08x\n", val);
-+ }
-+ }
-+
-+ if (cmd != NAND_CMD_NONE) writeb(cmd, chip->IO_ADDR_W);
-+}
-+
-+static void rbppc_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ memcpy(buf, chip->IO_ADDR_R, len);
-+}
-+
-+static unsigned init_ok = 0;
-+
-+static int rbppc_nand_probe(struct platform_device *pdev)
-+{
-+ struct device_node *gpio;
-+ struct device_node *nnand;
-+ struct resource res;
-+ struct rbppc_nand_info *info;
-+ void *baddr;
-+ const unsigned *rdy, *nce, *cle, *ale;
-+
-+ printk(KERN_INFO "rbppc_nand_probe: MikroTik RouterBOARD 333/600 series NAND driver, version " DRV_VERSION "\n");
-+
-+ info = kmalloc(sizeof(*info), GFP_KERNEL);
-+
-+ rdy = of_get_property(pdev->dev.of_node, "rdy", NULL);
-+ nce = of_get_property(pdev->dev.of_node, "nce", NULL);
-+ cle = of_get_property(pdev->dev.of_node, "cle", NULL);
-+ ale = of_get_property(pdev->dev.of_node, "ale", NULL);
-+
-+ if (!rdy || !nce || !cle || !ale) {
-+ printk(KERN_ERR "rbppc_nand_probe: GPIO properties are missing\n");
-+ goto err;
-+ }
-+ if (rdy[0] != nce[0] || rdy[0] != cle[0] || rdy[0] != ale[0]) {
-+ printk(KERN_ERR "rbppc_nand_probe: Different GPIOs are not supported\n");
-+ goto err;
-+ }
-+
-+ gpio = of_find_node_by_phandle(rdy[0]);
-+ if (!gpio) {
-+ printk(KERN_ERR "rbppc_nand_probe: No GPIO<%x> node found\n", *rdy);
-+ goto err;
-+ }
-+ if (of_address_to_resource(gpio, 0, &res)) {
-+ printk(KERN_ERR "rbppc_nand_probe: No reg property in GPIO found\n");
-+ goto err;
-+ }
-+ info->gpo = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ if (!of_address_to_resource(gpio, 1, &res)) {
-+ info->gpi = ioremap_nocache(res.start, res.end - res.start + 1);
-+ } else {
-+ info->gpi = info->gpo;
-+ }
-+ of_node_put(gpio);
-+
-+ info->gpio_rdy = 1 << (31 - rdy[1]);
-+ info->gpio_nce = 1 << (31 - nce[1]);
-+ info->gpio_cle = 1 << (31 - cle[1]);
-+ info->gpio_ale = 1 << (31 - ale[1]);
-+ info->gpio_ctrls = info->gpio_nce | info->gpio_cle | info->gpio_ale;
-+
-+ nnand = of_find_node_by_name(NULL, "nnand");
-+ if (!nnand) {
-+ printk("rbppc_nand_probe: No nNAND found\n");
-+ goto err;
-+ }
-+ if (of_address_to_resource(nnand, 0, &res)) {
-+ printk("rbppc_nand_probe: No reg property in nNAND found\n");
-+ goto err;
-+ }
-+ of_node_put(nnand);
-+ info->localbus = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
-+ printk("rbppc_nand_probe: No reg property found\n");
-+ goto err;
-+ }
-+ baddr = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ memset(&rnand, 0, sizeof(rnand));
-+ rnand.cmd_ctrl = rbppc_nand_cmd_ctrl;
-+ rnand.dev_ready = rbppc_nand_dev_ready;
-+ rnand.read_buf = rbppc_nand_read_buf;
-+ rnand.IO_ADDR_W = baddr;
-+ rnand.IO_ADDR_R = baddr;
-+ rnand.priv = info;
-+
-+ memset(&rmtd, 0, sizeof(rmtd));
-+ rnand.ecc.mode = NAND_ECC_SOFT;
-+ rnand.ecc.layout = &rbppc_nand_oob_16;
-+ rnand.chip_delay = 25;
-+ rmtd.priv = &rnand;
-+ rmtd.owner = THIS_MODULE;
-+
-+ if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
-+ printk(KERN_ERR "rbppc_nand_probe: RouterBOARD NAND device not found\n");
-+ return -ENXIO;
-+ }
-+
-+ mtd_device_parse_register(&rmtd, NULL, 0, rbppc_nand_partition_info, 2);
-+ init_ok = 1;
-+ return 0;
-+
-+err:
-+ kfree(info);
-+ return -1;
-+}
-+
-+static struct of_device_id rbppc_nand_ids[] = {
-+ { .name = "nand", },
-+ { },
-+};
-+
-+static struct platform_driver rbppc_nand_driver = {
-+ .probe = rbppc_nand_probe,
-+ .driver = {
-+ .name = "rbppc-nand",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rbppc_nand_ids,
-+ },
-+};
-+
-+static int __init rbppc_nand_init(void)
-+{
-+ return platform_driver_register(&rbppc_nand_driver);
-+}
-+
-+static void __exit rbppc_nand_exit(void)
-+{
-+ platform_driver_unregister(&rbppc_nand_driver);
-+}
-+
-+MODULE_AUTHOR("Mikrotikls SIA");
-+MODULE_AUTHOR("Noah Fontes");
-+MODULE_AUTHOR("Michael Guntsche");
-+MODULE_DESCRIPTION("MikroTik RouterBOARD 333/600 series NAND driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(rbppc_nand_init);
-+module_exit(rbppc_nand_exit);
+++ /dev/null
---- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
-+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
-@@ -81,6 +81,11 @@
- reg = <0x3a0000 0x3c60000>;
- label = "rootfs";
- };
-+
-+ partition1@a0000 {
-+ reg = <0xa0000 0x3f60000>;
-+ label = "firmware";
-+ };
- };
- };
-
-@@ -474,4 +479,8 @@
- default-state = "off";
- };
- };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 rootfstype=squashfs noinitrd";
-+ };
- };
+++ /dev/null
---- a/arch/powerpc/Makefile
-+++ b/arch/powerpc/Makefile
-@@ -240,7 +240,9 @@ all: zImage
-
- # With make 3.82 we cannot mix normal and wildcard targets
- BOOT_TARGETS1 := zImage zImage.initrd uImage
--BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.%
-+BOOT_TARGETS2 := uImage.fit.% zImage% dtbImage% treeImage.% cuImage.% \
-+ simpleImage.% uImage.%
-+
-
- PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
-
-@@ -273,6 +275,7 @@ define archhelp
- @echo '* zImage - Build default images selected by kernel config'
- @echo ' zImage.* - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
- @echo ' uImage - U-Boot native image format'
-+ @echo ' uImage.fit.<dt> - U-Boot Flattened Image Tree image format'
- @echo ' cuImage.<dt> - Backwards compatible U-Boot image for older'
- @echo ' versions which do not support device trees'
- @echo ' dtbImage.<dt> - zImage with an embedded device tree blob'
---- a/arch/powerpc/boot/.gitignore
-+++ b/arch/powerpc/boot/.gitignore
-@@ -14,6 +14,7 @@ kernel-vmlinux.strip.c
- kernel-vmlinux.strip.gz
- mktree
- uImage
-+uImage.fit.*
- cuImage.*
- dtbImage.*
- *.dtb
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -357,6 +357,9 @@ $(obj)/uImage.initrd.%: vmlinux $(obj)/%
- $(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
- $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
-
-+$(obj)/uImage.fit.%: vmlinux $(obj)/%.dtb $(wrapperbits)
-+ $(call if_changed,wrap,uboot.fit,,$(obj)/$*.dtb)
-+
- $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
- $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
-
-@@ -399,6 +402,7 @@ zInstall: $(CONFIGURE) $(addprefix $(obj
-
- # anything not in $(targets)
- clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
-+ uImage.* \
- zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
- zImage.miboot zImage.pmac zImage.pseries \
- zImage.maple simpleImage.* otheros.bld *.dtb
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -48,6 +48,9 @@ CROSS=
- # mkimage wrapper script
- MKIMAGE=$srctree/scripts/mkuboot.sh
-
-+# script to generate an .its file for uImage.fit.* images
-+MKITS=$srctree/scripts/mkits.sh
-+
- # directory for object and other files used by this script
- object=arch/powerpc/boot
- objbin=$object
-@@ -365,6 +368,21 @@ uboot-obs600)
- if [ -z "$cacheit" ]; then
- rm -f "$vmz"
- fi
-+ exit 0
-+ ;;
-+uboot.fit)
-+ rm -f "$ofile"
-+ ${MKITS} -A ppc -C gzip -a $membase -e $membase -v $version \
-+ -d "$srctree/$dtb" -k "$srctree/$vmz" -o "$object/uImage.its"
-+
-+ # mkimage calls dtc for FIT images so use kernel dtc if necessary
-+ export PATH=$PATH:$srctree/scripts/dtc
-+
-+ ${MKIMAGE} -f "$object/uImage.its" "$ofile"
-+ rm "$object/uImage.its"
-+ if [ -z "$cacheit" ]; then
-+ rm -f "$vmz"
-+ fi
- exit 0
- ;;
- esac
+++ /dev/null
---- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
-+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
-@@ -460,4 +460,18 @@
- 0 0x00800000>;
- };
- };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ diag {
-+ gpios = <&gpio1 9 1>;
-+ default-state = "off";
-+ };
-+
-+ wireless {
-+ gpios = <&gpio1 10 1>;
-+ default-state = "off";
-+ };
-+ };
- };
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -74,6 +74,12 @@ config VITESSE_PHY
- ---help---
- Currently supports the vsc8244
-
-+config VITESSE_PHY_8601_SKEW
-+ bool "Enable skew timing to vsc8601"
-+ depends on VITESSE_PHY
-+ ---help---
-+ Apply clock timing adjustments for vsc8601
-+
- config SMSC_PHY
- tristate "Drivers for SMSC PHYs"
- ---help---
---- a/drivers/net/phy/vitesse.c
-+++ b/drivers/net/phy/vitesse.c
-@@ -31,6 +31,11 @@
- #define MII_VSC8244_EXTCON1_TX_SKEW 0x0800
- #define MII_VSC8244_EXTCON1_RX_SKEW 0x0200
-
-+/* EXT_CON1 Register values for VSC8601 */
-+#define MII_VSC8601_EXTCON1_INIT 0x0000
-+#define MII_VSC8601_EXTCON1_SKEW 0x0100
-+#define MII_VSC8601_EXTCON1_ACTIPHY 0x0020
-+
- /* Vitesse Interrupt Mask Register */
- #define MII_VSC8244_IMASK 0x19
- #define MII_VSC8244_IMASK_IEN 0x8000
-@@ -69,6 +74,7 @@
- #define PHY_ID_VSC8662 0x00070660
- #define PHY_ID_VSC8221 0x000fc550
- #define PHY_ID_VSC8211 0x000fc4b0
-+#define PHY_ID_VSC8601 0x00070420
-
- MODULE_DESCRIPTION("Vitesse PHY driver");
- MODULE_AUTHOR("Kriston Carson");
-@@ -110,6 +116,30 @@ static int vsc824x_config_init(struct ph
- return err;
- }
-
-+static int vsc8601_config_init(struct phy_device *phydev)
-+{
-+ int err;
-+ int extcon;
-+
-+ err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
-+ MII_VSC8244_AUXCONSTAT_INIT);
-+
-+ if (err < 0)
-+ return err;
-+
-+#ifdef CONFIG_VITESSE_PHY_8601_SKEW
-+ extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
-+ if (err < 0)
-+ return err;
-+
-+ extcon |= MII_VSC8601_EXTCON1_SKEW;
-+
-+ err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
-+#endif
-+
-+ return err;
-+}
-+
- static int vsc824x_ack_interrupt(struct phy_device *phydev)
- {
- int err = 0;
-@@ -309,6 +339,19 @@ static struct phy_driver vsc82xx_driver[
- .ack_interrupt = &vsc824x_ack_interrupt,
- .config_intr = &vsc82xx_config_intr,
- .driver = { .owner = THIS_MODULE,},
-+}, {
-+ /* Vitesse 8601 */
-+ .phy_id = PHY_ID_VSC8601,
-+ .name = "Vitesse VSC8601",
-+ .phy_id_mask = 0x000ffff8,
-+ .features = PHY_GBIT_FEATURES,
-+ .flags = PHY_HAS_INTERRUPT,
-+ .config_init = &vsc8601_config_init,
-+ .config_aneg = &genphy_config_aneg,
-+ .read_status = &genphy_read_status,
-+ .ack_interrupt = &vsc824x_ack_interrupt,
-+ .config_intr = &vsc82xx_config_intr,
-+ .driver = { .owner = THIS_MODULE,},
- } };
-
- static int __init vsc82xx_init(void)
+++ /dev/null
---- a/drivers/net/ethernet/freescale/gianfar.c
-+++ b/drivers/net/ethernet/freescale/gianfar.c
-@@ -1050,10 +1050,16 @@ static int gfar_probe(struct platform_de
- udelay(2);
-
- tempval = 0;
-- if (!priv->pause_aneg_en && priv->tx_pause_en)
-- tempval |= MACCFG1_TX_FLOW;
-- if (!priv->pause_aneg_en && priv->rx_pause_en)
-- tempval |= MACCFG1_RX_FLOW;
-+ /*
-+ * Do not enable flow control on chips earlier than rev 1.1,
-+ * because of the eTSEC27 erratum
-+ */
-+ if ((mfspr(SPRN_SVR) & 0xffff) >= 0x0011) {
-+ if (!priv->pause_aneg_en && priv->tx_pause_en)
-+ tempval |= MACCFG1_TX_FLOW;
-+ if (!priv->pause_aneg_en && priv->rx_pause_en)
-+ tempval |= MACCFG1_RX_FLOW;
-+ }
- /* the soft reset bit is not self-resetting, so we need to
- * clear it before resuming normal operation
- */
+++ /dev/null
---- /dev/null
-+++ b/drivers/misc/ucc_tdm.h
-@@ -0,0 +1,221 @@
-+/*
-+ * drivers/misc/ucc_tdm.h
-+ *
-+ * UCC Based Linux TDM Driver
-+ * This driver is designed to support UCC based TDM for PowerPC processors.
-+ * This driver can interface with SLIC device to run VOIP kind of
-+ * applications.
-+ *
-+ * Author: Ashish Kalra & Poonam Aggrwal
-+ *
-+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef TDM_H
-+#define TDM_H
-+
-+#define NUM_TS 8
-+#define ACTIVE_CH 8
-+
-+/* SAMPLE_DEPTH is the sample depth is the number of frames before
-+ * an interrupt. Must be a multiple of 4
-+ */
-+#define SAMPLE_DEPTH 80
-+
-+/* define the number of Rx interrupts to go by for initial stuttering */
-+#define STUTTER_INT_CNT 1
-+
-+/* BMRx Field Descriptions to specify tstate and rstate in UCC parameter RAM*/
-+#define EN_BUS_SNOOPING 0x20
-+#define BE_BO 0x10
-+
-+/* UPSMR Register for Transparent UCC controller Bit definitions*/
-+#define NBO 0x00000000 /* Normal Mode 1 bit of data per clock */
-+
-+/* SI Mode register bit definitions */
-+#define NORMAL_OPERATION 0x0000
-+#define AUTO_ECHO 0x0400
-+#define INTERNAL_LB 0x0800
-+#define CONTROL_LB 0x0c00
-+#define SIMODE_CRT (0x8000 >> 9)
-+#define SIMODE_SL (0x8000 >> 10)
-+#define SIMODE_CE (0x8000 >> 11)
-+#define SIMODE_FE (0x8000 >> 12)
-+#define SIMODE_GM (0x8000 >> 13)
-+#define SIMODE_TFSD(val) (val)
-+#define SIMODE_RFSD(val) ((val) << 8)
-+
-+#define SI_TDM_MODE_REGISTER_OFFSET 0
-+
-+#define R_CM 0x02000000
-+#define T_CM 0x02000000
-+
-+#define SET_RX_SI_RAM(n, val) \
-+ out_be16((u16 *)&qe_immr->sir.rx[(n)*2], (u16)(val))
-+
-+#define SET_TX_SI_RAM(n, val) \
-+ out_be16((u16 *)&qe_immr->sir.tx[(n)*2], (u16)(val))
-+
-+/* SI RAM entries */
-+#define SIR_LAST 0x0001
-+#define SIR_CNT(n) ((n) << 2)
-+#define SIR_BYTE 0x0002
-+#define SIR_BIT 0x0000
-+#define SIR_IDLE 0
-+#define SIR_UCC(uccx) (((uccx+9)) << 5)
-+
-+/* BRGC Register Bit definitions */
-+#define BRGC_RESET (0x1<<17)
-+#define BRGC_EN (0x1<<16)
-+#define BRGC_EXTC_QE (0x00<<14)
-+#define BRGC_EXTC_CLK3 (0x01<<14)
-+#define BRGC_EXTC_CLK5 (0x01<<15)
-+#define BRGC_EXTC_CLK9 (0x01<<14)
-+#define BRGC_EXTC_CLK11 (0x01<<14)
-+#define BRGC_EXTC_CLK13 (0x01<<14)
-+#define BRGC_EXTC_CLK15 (0x01<<15)
-+#define BRGC_ATB (0x1<<13)
-+#define BRGC_DIV16 (0x1)
-+
-+/* structure representing UCC transparent parameter RAM */
-+struct ucc_transparent_pram {
-+ __be16 riptr;
-+ __be16 tiptr;
-+ __be16 res0;
-+ __be16 mrblr;
-+ __be32 rstate;
-+ __be32 rbase;
-+ __be16 rbdstat;
-+ __be16 rbdlen;
-+ __be32 rdptr;
-+ __be32 tstate;
-+ __be32 tbase;
-+ __be16 tbdstat;
-+ __be16 tbdlen;
-+ __be32 tdptr;
-+ __be32 rbptr;
-+ __be32 tbptr;
-+ __be32 rcrc;
-+ __be32 res1;
-+ __be32 tcrc;
-+ __be32 res2;
-+ __be32 res3;
-+ __be32 c_mask;
-+ __be32 c_pres;
-+ __be16 disfc;
-+ __be16 crcec;
-+ __be32 res4[4];
-+ __be16 ts_tmp;
-+ __be16 tmp_mb;
-+};
-+
-+#define UCC_TRANSPARENT_PRAM_SIZE 0x100
-+
-+struct tdm_cfg {
-+ u8 com_pin; /* Common receive and transmit pins
-+ * 0 = separate pins
-+ * 1 = common pins
-+ */
-+
-+ u8 fr_sync_level; /* SLx bit Frame Sync Polarity
-+ * 0 = L1R/TSYNC active logic "1"
-+ * 1 = L1R/TSYNC active logic "0"
-+ */
-+
-+ u8 clk_edge; /* CEx bit Tx Rx Clock Edge
-+ * 0 = TX data on rising edge of clock
-+ * RX data on falling edge
-+ * 1 = TX data on falling edge of clock
-+ * RX data on rising edge
-+ */
-+
-+ u8 fr_sync_edge; /* FEx bit Frame sync edge
-+ * Determine when the sync pulses are sampled
-+ * 0 = Falling edge
-+ * 1 = Rising edge
-+ */
-+
-+ u8 rx_fr_sync_delay; /* TFSDx/RFSDx bits Frame Sync Delay
-+ * 00 = no bit delay
-+ * 01 = 1 bit delay
-+ * 10 = 2 bit delay
-+ * 11 = 3 bit delay
-+ */
-+
-+ u8 tx_fr_sync_delay; /* TFSDx/RFSDx bits Frame Sync Delay
-+ * 00 = no bit delay
-+ * 01 = 1 bit delay
-+ * 10 = 2 bit delay
-+ * 11 = 3 bit delay
-+ */
-+
-+ u8 active_num_ts; /* Number of active time slots in TDM
-+ * assume same active Rx/Tx time slots
-+ */
-+};
-+
-+struct ucc_tdm_info {
-+ struct ucc_fast_info uf_info;
-+ u32 ucc_busy;
-+};
-+
-+struct tdm_ctrl {
-+ u32 device_busy;
-+ struct device *device;
-+ struct ucc_fast_private *uf_private;
-+ struct ucc_tdm_info *ut_info;
-+ u32 tdm_port; /* port for this tdm:TDMA,TDMB,TDMC,TDMD */
-+ u32 si; /* serial interface: 0 or 1 */
-+ struct ucc_fast __iomem *uf_regs; /* UCC Fast registers */
-+ u16 rx_mask[8]; /* Active Receive channels LSB is ch0 */
-+ u16 tx_mask[8]; /* Active Transmit channels LSB is ch0 */
-+ /* Only channels less than the number of FRAME_SIZE are implemented */
-+ struct tdm_cfg cfg_ctrl; /* Signaling controls configuration */
-+ u8 *tdm_input_data; /* buffer used for Rx by the tdm */
-+ u8 *tdm_output_data; /* buffer used for Tx by the tdm */
-+
-+ dma_addr_t dma_input_addr; /* dma mapped buffer for TDM Rx */
-+ dma_addr_t dma_output_addr; /* dma mapped buffer for TDM Tx */
-+ u16 physical_num_ts; /* physical number of timeslots in the tdm
-+ frame */
-+ u32 phase_rx; /* cycles through 0, 1, 2 */
-+ u32 phase_tx; /* cycles through 0, 1, 2 */
-+ /*
-+ * the following two variables are for dealing with "stutter" problem
-+ * "stutter" period is about 20 frames or so, varies depending active
-+ * channel num depending on the sample depth, the code should let a
-+ * few Rx interrupts go by
-+ */
-+ u32 tdm_icnt;
-+ u32 tdm_flag;
-+ struct ucc_transparent_pram __iomem *ucc_pram;
-+ struct qe_bd __iomem *tx_bd;
-+ struct qe_bd __iomem *rx_bd;
-+ u32 ucc_pram_offset;
-+ u32 tx_bd_offset;
-+ u32 rx_bd_offset;
-+ u32 rx_ucode_buf_offset;
-+ u32 tx_ucode_buf_offset;
-+ bool leg_slic;
-+ wait_queue_head_t wakeup_event;
-+};
-+
-+struct tdm_client {
-+ u32 client_id;
-+ void (*tdm_read)(u32 client_id, short chn_id,
-+ short *pcm_buffer, short len);
-+ void (*tdm_write)(u32 client_id, short chn_id,
-+ short *pcm_buffer, short len);
-+ wait_queue_head_t *wakeup_event;
-+ };
-+
-+#define MAX_PHASE 1
-+#define NR_BUFS 2
-+#define EFF_ACTIVE_CH ACTIVE_CH / 2
-+
-+#endif
---- /dev/null
-+++ b/drivers/misc/ucc_tdm.c
-@@ -0,0 +1,1017 @@
-+/*
-+ * drivers/misc/ucc_tdm.c
-+ *
-+ * UCC Based Linux TDM Driver
-+ * This driver is designed to support UCC based TDM for PowerPC processors.
-+ * This driver can interface with SLIC device to run VOIP kind of
-+ * applications.
-+ *
-+ * Author: Ashish Kalra & Poonam Aggrwal
-+ *
-+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+#include <linux/time.h>
-+#include <linux/skbuff.h>
-+#include <linux/proc_fs.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/string.h>
-+#include <linux/irq.h>
-+#include <linux/of_platform.h>
-+#include <linux/io.h>
-+#include <linux/wait.h>
-+#include <linux/timer.h>
-+
-+#include <asm/immap_qe.h>
-+#include <asm/qe.h>
-+#include <asm/ucc.h>
-+#include <asm/ucc_fast.h>
-+#include <asm/ucc_slow.h>
-+
-+#include "ucc_tdm.h"
-+#define DRV_DESC "Freescale QE UCC TDM Driver"
-+#define DRV_NAME "ucc_tdm"
-+
-+
-+/*
-+ * define the following #define if snooping or hardware-based cache coherency
-+ * is disabled on the UCC transparent controller.This flag enables
-+ * software-based cache-coherency support by explicitly flushing data cache
-+ * contents after setting up the TDM output buffer(s) and invalidating the
-+ * data cache contents before the TDM input buffer(s) are read.
-+ */
-+#undef UCC_CACHE_SNOOPING_DISABLED
-+
-+#define MAX_NUM_TDM_DEVICES 8
-+
-+static struct tdm_ctrl *tdm_ctrl[MAX_NUM_TDM_DEVICES];
-+
-+static int num_tdm_devices;
-+static int num_tdm_clients;
-+
-+static struct ucc_tdm_info utdm_primary_info = {
-+ .uf_info = {
-+ .tsa = 1,
-+ .cdp = 1,
-+ .cds = 1,
-+ .ctsp = 1,
-+ .ctss = 1,
-+ .revd = 1,
-+ .urfs = 0x128,
-+ .utfs = 0x128,
-+ .utfet = 0,
-+ .utftt = 0x128,
-+ .ufpt = 256,
-+ .ttx_trx = UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT,
-+ .tenc = UCC_FAST_TX_ENCODING_NRZ,
-+ .renc = UCC_FAST_RX_ENCODING_NRZ,
-+ .tcrc = UCC_FAST_16_BIT_CRC,
-+ .synl = UCC_FAST_SYNC_LEN_NOT_USED,
-+ },
-+ .ucc_busy = 0,
-+};
-+
-+static struct ucc_tdm_info utdm_info[8];
-+
-+static void dump_siram(struct tdm_ctrl *tdm_c)
-+{
-+#ifdef DEBUG
-+ int i;
-+ u16 phy_num_ts;
-+
-+ phy_num_ts = tdm_c->physical_num_ts;
-+
-+ pr_debug("SI TxRAM dump\n");
-+ /* each slot entry in SI RAM is of 2 bytes */
-+ for (i = 0; i < phy_num_ts * 2; i++)
-+ pr_debug("%x ", in_8(&qe_immr->sir.tx[i]));
-+ pr_debug("\nSI RxRAM dump\n");
-+ for (i = 0; i < phy_num_ts * 2; i++)
-+ pr_debug("%x ", in_8(&qe_immr->sir.rx[i]));
-+ pr_debug("\n");
-+#endif
-+}
-+
-+static void dump_ucc(struct tdm_ctrl *tdm_c)
-+{
-+#ifdef DEBUG
-+ struct ucc_transparent_pram *ucc_pram;
-+
-+ ucc_pram = tdm_c->ucc_pram;
-+
-+ pr_debug("%s Dumping UCC Registers\n", __FUNCTION__);
-+ ucc_fast_dump_regs(tdm_c->uf_private);
-+ pr_debug("%s Dumping UCC Parameter RAM\n", __FUNCTION__);
-+ pr_debug("rbase = 0x%x\n", in_be32(&ucc_pram->rbase));
-+ pr_debug("rbptr = 0x%x\n", in_be32(&ucc_pram->rbptr));
-+ pr_debug("mrblr = 0x%x\n", in_be16(&ucc_pram->mrblr));
-+ pr_debug("rbdlen = 0x%x\n", in_be16(&ucc_pram->rbdlen));
-+ pr_debug("rbdstat = 0x%x\n", in_be16(&ucc_pram->rbdstat));
-+ pr_debug("rstate = 0x%x\n", in_be32(&ucc_pram->rstate));
-+ pr_debug("rdptr = 0x%x\n", in_be32(&ucc_pram->rdptr));
-+ pr_debug("tbase = 0x%x\n", in_be32(&ucc_pram->tbase));
-+ pr_debug("tbptr = 0x%x\n", in_be32(&ucc_pram->tbptr));
-+ pr_debug("tbdlen = 0x%x\n", in_be16(&ucc_pram->tbdlen));
-+ pr_debug("tbdstat = 0x%x\n", in_be16(&ucc_pram->tbdstat));
-+ pr_debug("tstate = 0x%x\n", in_be32(&ucc_pram->tstate));
-+ pr_debug("tdptr = 0x%x\n", in_be32(&ucc_pram->tdptr));
-+#endif
-+}
-+
-+/*
-+ * For use when a framing bit is not present
-+ * Program current-route SI ram
-+ * Set SIxRAM TDMx
-+ * Entries must be in units of 8.
-+ * SIR_UCC -> Channel Select
-+ * SIR_CNT -> Number of bits or bytes
-+ * SIR_BYTE -> Byte or Bit resolution
-+ * SIR_LAST -> Indicates last entry in SIxRAM
-+ * SIR_IDLE -> The Tx data pin is Tri-stated and the Rx data pin is
-+ * ignored
-+ */
-+static void set_siram(struct tdm_ctrl *tdm_c, enum comm_dir dir)
-+{
-+ const u16 *mask;
-+ u16 temp_mask = 1;
-+ u16 siram_code = 0;
-+ u32 i, j, k;
-+ u32 ucc;
-+ u32 phy_num_ts;
-+
-+ phy_num_ts = tdm_c->physical_num_ts;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+
-+ if (dir == COMM_DIR_RX)
-+ mask = tdm_c->rx_mask;
-+ else
-+ mask = tdm_c->tx_mask;
-+ k = 0;
-+ j = 0;
-+ for (i = 0; i < phy_num_ts; i++) {
-+ if ((mask[k] & temp_mask) == temp_mask)
-+ siram_code = SIR_UCC(ucc) | SIR_CNT(0) | SIR_BYTE;
-+ else
-+ siram_code = SIR_IDLE | SIR_CNT(0) | SIR_BYTE;
-+ if (dir == COMM_DIR_RX)
-+ out_be16((u16 *)&qe_immr->sir.rx[i * 2], siram_code);
-+ else
-+ out_be16((u16 *)&qe_immr->sir.tx[i * 2], siram_code);
-+ temp_mask = temp_mask << 1;
-+ j++;
-+ if (j >= 16) {
-+ j = 0;
-+ temp_mask = 0x0001;
-+ k++;
-+ }
-+ }
-+ siram_code = siram_code | SIR_LAST;
-+
-+ if (dir == COMM_DIR_RX)
-+ out_be16((u16 *)&qe_immr->sir.rx[(phy_num_ts - 1) * 2],
-+ siram_code);
-+ else
-+ out_be16((u16 *)&qe_immr->sir.tx[(phy_num_ts - 1) * 2],
-+ siram_code);
-+}
-+
-+static void config_si(struct tdm_ctrl *tdm_c)
-+{
-+ u8 rxsyncdelay, txsyncdelay, tdm_port;
-+ u16 sixmr_val = 0;
-+ u32 tdma_mode_off;
-+ u16 *si1_tdm_mode_reg;
-+
-+ tdm_port = tdm_c->tdm_port;
-+
-+ set_siram(tdm_c, COMM_DIR_RX);
-+
-+ set_siram(tdm_c, COMM_DIR_TX);
-+
-+ rxsyncdelay = tdm_c->cfg_ctrl.rx_fr_sync_delay;
-+ txsyncdelay = tdm_c->cfg_ctrl.tx_fr_sync_delay;
-+ if (tdm_c->cfg_ctrl.com_pin)
-+ sixmr_val |= SIMODE_CRT;
-+ if (tdm_c->cfg_ctrl.fr_sync_level == 1)
-+ sixmr_val |= SIMODE_SL;
-+ if (tdm_c->cfg_ctrl.clk_edge == 1)
-+ sixmr_val |= SIMODE_CE;
-+ if (tdm_c->cfg_ctrl.fr_sync_edge == 1)
-+ sixmr_val |= SIMODE_FE;
-+ sixmr_val |= (SIMODE_TFSD(txsyncdelay) | SIMODE_RFSD(rxsyncdelay));
-+
-+ tdma_mode_off = SI_TDM_MODE_REGISTER_OFFSET * tdm_c->tdm_port;
-+
-+ si1_tdm_mode_reg = (u8 *)&qe_immr->si1 + tdma_mode_off;
-+ out_be16(si1_tdm_mode_reg, sixmr_val);
-+
-+ dump_siram(tdm_c);
-+}
-+
-+static int tdm_init(struct tdm_ctrl *tdm_c)
-+{
-+ u32 tdm_port, ucc, act_num_ts;
-+ int ret, i, err;
-+ u32 cecr_subblock;
-+ u32 pram_offset;
-+ u32 rxbdt_offset;
-+ u32 txbdt_offset;
-+ u32 rx_ucode_buf_offset, tx_ucode_buf_offset;
-+ u16 bd_status, bd_len;
-+ enum qe_clock clock;
-+ struct qe_bd __iomem *rx_bd, *tx_bd;
-+
-+ tdm_port = tdm_c->tdm_port;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+ act_num_ts = tdm_c->cfg_ctrl.active_num_ts;
-+
-+ /*
-+ * TDM Tx and Rx CLKs = 2048 KHz.
-+ */
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_tx_clk, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_tx_clk);
-+ err = qe_setbrg(clock, 2048000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_tx_clk);
-+ return err;
-+ }
-+ }
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_rx_clk, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_rx_clk);
-+ err = qe_setbrg(clock, 2048000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_rx_clk);
-+ return err;
-+ }
-+ }
-+ /*
-+ * TDM FSyncs = 4 KHz.
-+ */
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_tx_sync, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_tx_sync);
-+ err = qe_setbrg(clock, 4000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_tx_sync);
-+ return err;
-+ }
-+ }
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_rx_sync, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_rx_sync);
-+ err = qe_setbrg(clock, 4000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_rx_sync);
-+ return err;
-+ }
-+ }
-+
-+ tdm_c->ut_info->uf_info.uccm_mask = (u32)
-+ ((UCC_TRANS_UCCE_RXB | UCC_TRANS_UCCE_BSY) << 16);
-+
-+ if (ucc_fast_init(&(tdm_c->ut_info->uf_info), &tdm_c->uf_private)) {
-+ printk(KERN_ERR "%s: Failed to init uccf\n", __FUNCTION__);
-+ return -ENOMEM;
-+ }
-+
-+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_RX | COMM_DIR_TX);
-+
-+ /* Write to QE CECR, UCCx channel to Stop Transmission */
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_STOP_TX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+
-+ pram_offset = qe_muram_alloc(UCC_TRANSPARENT_PRAM_SIZE,
-+ ALIGNMENT_OF_UCC_SLOW_PRAM);
-+ if (IS_ERR_VALUE(pram_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for"
-+ " transparent UCC\n", __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto pram_alloc_error;
-+ }
-+
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, cecr_subblock,
-+ QE_CR_PROTOCOL_UNSPECIFIED, pram_offset);
-+
-+ tdm_c->ucc_pram = qe_muram_addr(pram_offset);
-+ tdm_c->ucc_pram_offset = pram_offset;
-+
-+ /*
-+ * zero-out pram, this will also ensure RSTATE, TSTATE are cleared, also
-+ * DISFC & CRCEC counters will be initialized.
-+ */
-+ memset(tdm_c->ucc_pram, 0, sizeof(struct ucc_transparent_pram));
-+
-+ /* rbase, tbase alignment is 8. */
-+ rxbdt_offset = qe_muram_alloc(NR_BUFS * sizeof(struct qe_bd),
-+ QE_ALIGNMENT_OF_BD);
-+ if (IS_ERR_VALUE(rxbdt_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for RxBDs\n",
-+ __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto rxbd_alloc_error;
-+ }
-+ txbdt_offset = qe_muram_alloc(NR_BUFS * sizeof(struct qe_bd),
-+ QE_ALIGNMENT_OF_BD);
-+ if (IS_ERR_VALUE(txbdt_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for TxBDs\n",
-+ __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto txbd_alloc_error;
-+ }
-+ tdm_c->tx_bd = qe_muram_addr(txbdt_offset);
-+ tdm_c->rx_bd = qe_muram_addr(rxbdt_offset);
-+
-+ tdm_c->tx_bd_offset = txbdt_offset;
-+ tdm_c->rx_bd_offset = rxbdt_offset;
-+
-+ rx_bd = tdm_c->rx_bd;
-+ tx_bd = tdm_c->tx_bd;
-+
-+ out_be32(&tdm_c->ucc_pram->rbase, (u32) immrbar_virt_to_phys(rx_bd));
-+ out_be32(&tdm_c->ucc_pram->tbase, (u32) immrbar_virt_to_phys(tx_bd));
-+
-+ for (i = 0; i < NR_BUFS - 1; i++) {
-+ bd_status = (u16) ((R_E | R_CM | R_I) >> 16);
-+ bd_len = 0;
-+ out_be16(&rx_bd->length, bd_len);
-+ out_be16(&rx_bd->status, bd_status);
-+ out_be32(&rx_bd->buf,
-+ tdm_c->dma_input_addr + i * SAMPLE_DEPTH * act_num_ts);
-+ rx_bd += 1;
-+
-+ bd_status = (u16) ((T_R | T_CM) >> 16);
-+ bd_len = SAMPLE_DEPTH * act_num_ts;
-+ out_be16(&tx_bd->length, bd_len);
-+ out_be16(&tx_bd->status, bd_status);
-+ out_be32(&tx_bd->buf,
-+ tdm_c->dma_output_addr + i * SAMPLE_DEPTH * act_num_ts);
-+ tx_bd += 1;
-+ }
-+
-+ bd_status = (u16) ((R_E | R_CM | R_I | R_W) >> 16);
-+ bd_len = 0;
-+ out_be16(&rx_bd->length, bd_len);
-+ out_be16(&rx_bd->status, bd_status);
-+ out_be32(&rx_bd->buf,
-+ tdm_c->dma_input_addr + i * SAMPLE_DEPTH * act_num_ts);
-+
-+ bd_status = (u16) ((T_R | T_CM | T_W) >> 16);
-+ bd_len = SAMPLE_DEPTH * act_num_ts;
-+ out_be16(&tx_bd->length, bd_len);
-+ out_be16(&tx_bd->status, bd_status);
-+ out_be32(&tx_bd->buf,
-+ tdm_c->dma_output_addr + i * SAMPLE_DEPTH * act_num_ts);
-+
-+ config_si(tdm_c);
-+
-+ setbits32(&qe_immr->ic.qimr, (0x80000000UL >> ucc));
-+
-+ rx_ucode_buf_offset = qe_muram_alloc(32, 32);
-+ if (IS_ERR_VALUE(rx_ucode_buf_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM mem for Rx"
-+ " ucode buf\n", __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto rxucode_buf_alloc_error;
-+ }
-+
-+ tx_ucode_buf_offset = qe_muram_alloc(32, 32);
-+ if (IS_ERR_VALUE(tx_ucode_buf_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM mem for Tx"
-+ " ucode buf\n", __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto txucode_buf_alloc_error;
-+ }
-+ out_be16(&tdm_c->ucc_pram->riptr, (u16) rx_ucode_buf_offset);
-+ out_be16(&tdm_c->ucc_pram->tiptr, (u16) tx_ucode_buf_offset);
-+
-+ tdm_c->rx_ucode_buf_offset = rx_ucode_buf_offset;
-+ tdm_c->tx_ucode_buf_offset = tx_ucode_buf_offset;
-+
-+ /*
-+ * set the receive buffer descriptor maximum size to be
-+ * SAMPLE_DEPTH * number of active RX channels
-+ */
-+ out_be16(&tdm_c->ucc_pram->mrblr, (u16) SAMPLE_DEPTH * act_num_ts);
-+
-+ /*
-+ * enable snooping and BE byte ordering on the UCC pram's
-+ * tstate & rstate registers.
-+ */
-+ out_be32(&tdm_c->ucc_pram->tstate, 0x30000000UL);
-+ out_be32(&tdm_c->ucc_pram->rstate, 0x30000000UL);
-+
-+ /*Put UCC transparent controller into serial interface mode. */
-+ out_be32(&tdm_c->uf_regs->upsmr, 0);
-+
-+ /* Reset TX and RX for UCCx */
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+
-+ return 0;
-+
-+txucode_buf_alloc_error:
-+ qe_muram_free(rx_ucode_buf_offset);
-+rxucode_buf_alloc_error:
-+ qe_muram_free(txbdt_offset);
-+txbd_alloc_error:
-+ qe_muram_free(rxbdt_offset);
-+rxbd_alloc_error:
-+ qe_muram_free(pram_offset);
-+pram_alloc_error:
-+ ucc_fast_free(tdm_c->uf_private);
-+ return ret;
-+}
-+
-+static void tdm_deinit(struct tdm_ctrl *tdm_c)
-+{
-+ qe_muram_free(tdm_c->rx_ucode_buf_offset);
-+ qe_muram_free(tdm_c->tx_ucode_buf_offset);
-+
-+ if (tdm_c->rx_bd_offset) {
-+ qe_muram_free(tdm_c->rx_bd_offset);
-+ tdm_c->rx_bd = NULL;
-+ tdm_c->rx_bd_offset = 0;
-+ }
-+ if (tdm_c->tx_bd_offset) {
-+ qe_muram_free(tdm_c->tx_bd_offset);
-+ tdm_c->tx_bd = NULL;
-+ tdm_c->tx_bd_offset = 0;
-+ }
-+ if (tdm_c->ucc_pram_offset) {
-+ qe_muram_free(tdm_c->ucc_pram_offset);
-+ tdm_c->ucc_pram = NULL;
-+ tdm_c->ucc_pram_offset = 0;
-+ }
-+}
-+
-+
-+static irqreturn_t tdm_isr(int irq, void *dev_id)
-+{
-+ u8 *input_tdm_buffer, *output_tdm_buffer;
-+ u32 txb, rxb;
-+ u32 ucc;
-+ register u32 ucce = 0;
-+ struct tdm_ctrl *tdm_c;
-+ tdm_c = (struct tdm_ctrl *)dev_id;
-+
-+ tdm_c->tdm_icnt++;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+ input_tdm_buffer = tdm_c->tdm_input_data;
-+ output_tdm_buffer = tdm_c->tdm_output_data;
-+
-+ if (in_be32(tdm_c->uf_private->p_ucce) &
-+ (UCC_TRANS_UCCE_BSY << 16)) {
-+ out_be32(tdm_c->uf_private->p_ucce,
-+ (UCC_TRANS_UCCE_BSY << 16));
-+ pr_info("%s: From tdm isr busy interrupt\n",
-+ __FUNCTION__);
-+ dump_ucc(tdm_c);
-+
-+ return IRQ_HANDLED;
-+ }
-+
-+ if (tdm_c->tdm_flag == 1) {
-+ /* track phases for Rx/Tx */
-+ tdm_c->phase_rx += 1;
-+ if (tdm_c->phase_rx == MAX_PHASE)
-+ tdm_c->phase_rx = 0;
-+
-+ tdm_c->phase_tx += 1;
-+ if (tdm_c->phase_tx == MAX_PHASE)
-+ tdm_c->phase_tx = 0;
-+
-+#ifdef CONFIG_TDM_HW_LB_TSA_SLIC
-+ {
-+ u32 temp_rx, temp_tx, phase_tx, phase_rx;
-+ int i;
-+ phase_rx = tdm_c->phase_rx;
-+ phase_tx = tdm_c->phase_tx;
-+ if (phase_rx == 0)
-+ phase_rx = MAX_PHASE;
-+ else
-+ phase_rx -= 1;
-+ if (phase_tx == 0)
-+ phase_tx = MAX_PHASE;
-+ else
-+ phase_tx -= 1;
-+ temp_rx = phase_rx * SAMPLE_DEPTH * ACTIVE_CH;
-+ temp_tx = phase_tx * SAMPLE_DEPTH * ACTIVE_CH;
-+
-+ /*check if loopback received data on TS0 is correct. */
-+ pr_debug("%s: check if loopback received data on TS0"
-+ " is correct\n", __FUNCTION__);
-+ pr_debug("%d,%d ", phase_rx, phase_tx);
-+ for (i = 0; i < 8; i++)
-+ pr_debug("%1d,%1d ",
-+ input_tdm_buffer[temp_rx + i],
-+ output_tdm_buffer[temp_tx + i]);
-+ pr_debug("\n");
-+ }
-+#endif
-+
-+ /* schedule BH */
-+ wake_up_interruptible(&tdm_c->wakeup_event);
-+ } else {
-+ if (tdm_c->tdm_icnt == STUTTER_INT_CNT) {
-+ txb = in_be32(&tdm_c->ucc_pram->tbptr) -
-+ in_be32(&tdm_c->ucc_pram->tbase);
-+ rxb = in_be32(&tdm_c->ucc_pram->rbptr) -
-+ in_be32(&tdm_c->ucc_pram->rbase);
-+ tdm_c->phase_tx = txb / sizeof(struct qe_bd);
-+ tdm_c->phase_rx = rxb / sizeof(struct qe_bd);
-+
-+#ifdef CONFIG_TDM_HW_LB_TSA_SLIC
-+ tdm_c->phase_tx = tdm_c->phase_rx;
-+#endif
-+
-+ /* signal "stuttering" period is over */
-+ tdm_c->tdm_flag = 1;
-+
-+ pr_debug("%s: stuttering period is over\n",
-+ __FUNCTION__);
-+
-+ if (in_be32(tdm_c->uf_private->p_ucce) &
-+ (UCC_TRANS_UCCE_TXE << 16)) {
-+ u32 cecr_subblock;
-+ out_be32(tdm_c->uf_private->p_ucce,
-+ (UCC_TRANS_UCCE_TXE << 16));
-+ pr_debug("%s: From tdm isr txe interrupt\n",
-+ __FUNCTION__);
-+
-+ cecr_subblock =
-+ ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED,
-+ 0);
-+ }
-+ }
-+ }
-+
-+ ucce = (in_be32(tdm_c->uf_private->p_ucce)
-+ & in_be32(tdm_c->uf_private->p_uccm));
-+
-+ out_be32(tdm_c->uf_private->p_ucce, ucce);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int tdm_start(struct tdm_ctrl *tdm_c)
-+{
-+ if (request_irq(tdm_c->ut_info->uf_info.irq, tdm_isr,
-+ 0, "tdm", tdm_c)) {
-+ printk(KERN_ERR "%s: request_irq for tdm_isr failed\n",
-+ __FUNCTION__);
-+ return -ENODEV;
-+ }
-+
-+ ucc_fast_enable(tdm_c->uf_private, COMM_DIR_RX | COMM_DIR_TX);
-+
-+ pr_info("%s 16-bit linear pcm mode active with"
-+ " slots 0 & 2\n", __FUNCTION__);
-+
-+ dump_siram(tdm_c);
-+ dump_ucc(tdm_c);
-+
-+ setbits8(&(qe_immr->si1.siglmr1_h), (0x1 << tdm_c->tdm_port));
-+ pr_info("%s UCC based TDM enabled\n", __FUNCTION__);
-+
-+ return 0;
-+}
-+
-+static void tdm_stop(struct tdm_ctrl *tdm_c)
-+{
-+ u32 port, si;
-+ u32 ucc;
-+ u32 cecr_subblock;
-+
-+ port = tdm_c->tdm_port;
-+ si = tdm_c->si;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+
-+ qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+ qe_issue_cmd(QE_CLOSE_RX_BD, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+
-+ clrbits8(&qe_immr->si1.siglmr1_h, (0x1 << port));
-+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_RX);
-+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_TX);
-+ free_irq(tdm_c->ut_info->uf_info.irq, tdm_c);
-+}
-+
-+
-+static void config_tdm(struct tdm_ctrl *tdm_c)
-+{
-+ u32 i, j, k;
-+
-+ j = 0;
-+ k = 0;
-+
-+ /* Set Mask Bits */
-+ for (i = 0; i < ACTIVE_CH; i++) {
-+ tdm_c->tx_mask[k] |= (1 << j);
-+ tdm_c->rx_mask[k] |= (1 << j);
-+ j++;
-+ if (j >= 16) {
-+ j = 0;
-+ k++;
-+ }
-+ }
-+ /* physical number of slots in a frame */
-+ tdm_c->physical_num_ts = NUM_TS;
-+
-+ /* common receive and transmit pins */
-+ tdm_c->cfg_ctrl.com_pin = 1;
-+
-+ /* L1R/TSYNC active logic "1" */
-+ tdm_c->cfg_ctrl.fr_sync_level = 0;
-+
-+ /*
-+ * TX data on rising edge of clock
-+ * RX data on falling edge
-+ */
-+ tdm_c->cfg_ctrl.clk_edge = 0;
-+
-+ /* Frame sync sampled on falling edge */
-+ tdm_c->cfg_ctrl.fr_sync_edge = 0;
-+
-+ /* no bit delay */
-+ tdm_c->cfg_ctrl.rx_fr_sync_delay = 0;
-+
-+ /* no bit delay */
-+ tdm_c->cfg_ctrl.tx_fr_sync_delay = 0;
-+
-+#ifndef CONFIG_TDM_HW_LB_TSA_SLIC
-+ if (tdm_c->leg_slic) {
-+ /* Need 1 bit delay for Legrity SLIC */
-+ tdm_c->cfg_ctrl.rx_fr_sync_delay = 1;
-+ tdm_c->cfg_ctrl.tx_fr_sync_delay = 1;
-+ pr_info("%s Delay for Legerity!\n", __FUNCTION__);
-+ }
-+#endif
-+
-+ tdm_c->cfg_ctrl.active_num_ts = ACTIVE_CH;
-+}
-+
-+static void tdm_read(u32 client_id, short chn_id, short *pcm_buffer,
-+ short len)
-+{
-+ int i;
-+ u32 phase_rx;
-+ /* point to where to start for the current phase data processing */
-+ u32 temp_rx;
-+
-+ struct tdm_ctrl *tdm_c = tdm_ctrl[client_id];
-+
-+ u16 *input_tdm_buffer =
-+ (u16 *)tdm_c->tdm_input_data;
-+
-+ phase_rx = tdm_c->phase_rx;
-+ if (phase_rx == 0)
-+ phase_rx = MAX_PHASE;
-+ else
-+ phase_rx -= 1;
-+
-+ temp_rx = phase_rx * SAMPLE_DEPTH * EFF_ACTIVE_CH;
-+
-+#ifdef UCC_CACHE_SNOOPING_DISABLED
-+ flush_dcache_range((size_t) &input_tdm_buffer[temp_rx],
-+ (size_t) &input_tdm_buffer[temp_rx +
-+ SAMPLE_DEPTH * ACTIVE_CH]);
-+#endif
-+ for (i = 0; i < len; i++)
-+ pcm_buffer[i] =
-+ input_tdm_buffer[i * EFF_ACTIVE_CH + temp_rx + chn_id];
-+
-+}
-+
-+static void tdm_write(u32 client_id, short chn_id, short *pcm_buffer,
-+ short len)
-+{
-+ int i;
-+ int phase_tx;
-+ u32 txb;
-+ /* point to where to start for the current phase data processing */
-+ int temp_tx;
-+ struct tdm_ctrl *tdm_c = tdm_ctrl[client_id];
-+
-+ u16 *output_tdm_buffer;
-+ output_tdm_buffer = (u16 *)tdm_c->tdm_output_data;
-+ txb = in_be32(&tdm_c->ucc_pram->tbptr) -
-+ in_be32(&tdm_c->ucc_pram->tbase);
-+ phase_tx = txb / sizeof(struct qe_bd);
-+
-+ if (phase_tx == 0)
-+ phase_tx = MAX_PHASE;
-+ else
-+ phase_tx -= 1;
-+
-+ temp_tx = phase_tx * SAMPLE_DEPTH * EFF_ACTIVE_CH;
-+
-+ for (i = 0; i < len; i++)
-+ output_tdm_buffer[i * EFF_ACTIVE_CH + temp_tx + chn_id] =
-+ pcm_buffer[i];
-+
-+#ifdef UCC_CACHE_SNOOPING_DISABLED
-+ flush_dcache_range((size_t) &output_tdm_buffer[temp_tx],
-+ (size_t) &output_tdm_buffer[temp_tx + SAMPLE_DEPTH *
-+ ACTIVE_CH]);
-+#endif
-+}
-+
-+
-+static int tdm_register_client(struct tdm_client *tdm_client)
-+{
-+ u32 i;
-+ if (num_tdm_clients == num_tdm_devices) {
-+ printk(KERN_ERR "all TDM devices busy\n");
-+ return -EBUSY;
-+ }
-+
-+ for (i = 0; i < num_tdm_devices; i++) {
-+ if (!tdm_ctrl[i]->device_busy) {
-+ tdm_ctrl[i]->device_busy = 1;
-+ break;
-+ }
-+ }
-+ num_tdm_clients++;
-+ tdm_client->client_id = i;
-+ tdm_client->tdm_read = tdm_read;
-+ tdm_client->tdm_write = tdm_write;
-+ tdm_client->wakeup_event =
-+ &(tdm_ctrl[i]->wakeup_event);
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(tdm_register_client);
-+
-+static int tdm_deregister_client(struct tdm_client *tdm_client)
-+{
-+ num_tdm_clients--;
-+ tdm_ctrl[tdm_client->client_id]->device_busy = 0;
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(tdm_deregister_client);
-+
-+static int ucc_tdm_probe(struct of_device *ofdev,
-+ const struct of_device_id *match)
-+{
-+ struct device_node *np = ofdev->node;
-+ struct resource res;
-+ const unsigned int *prop;
-+ u32 ucc_num, device_num, err, ret = 0;
-+ struct device_node *np_tmp;
-+ dma_addr_t physaddr;
-+ void *tdm_buff;
-+ struct ucc_tdm_info *ut_info;
-+
-+ prop = of_get_property(np, "device-id", NULL);
-+ if (prop == NULL) {
-+ printk(KERN_ERR "ucc_tdm: device-id missing\n");
-+ return -ENODEV;
-+ }
-+
-+ ucc_num = *prop - 1;
-+ if ((ucc_num < 0) || (ucc_num > 7))
-+ return -ENODEV;
-+
-+ ut_info = &utdm_info[ucc_num];
-+ if (ut_info->ucc_busy) {
-+ printk(KERN_ERR "ucc_tdm: UCC in use by another TDM driver"
-+ "instance\n");
-+ return -EBUSY;
-+ }
-+ if (num_tdm_devices == MAX_NUM_TDM_DEVICES) {
-+ printk(KERN_ERR "ucc_tdm: All TDM devices already"
-+ " initialized\n");
-+ return -ENODEV;
-+ }
-+
-+ ut_info->ucc_busy = 1;
-+ tdm_ctrl[num_tdm_devices++] =
-+ kzalloc(sizeof(struct tdm_ctrl), GFP_KERNEL);
-+ if (!tdm_ctrl[num_tdm_devices - 1]) {
-+ printk(KERN_ERR "ucc_tdm: no memory to allocate for"
-+ " tdm control structure\n");
-+ num_tdm_devices--;
-+ return -ENOMEM;
-+ }
-+ device_num = num_tdm_devices - 1;
-+
-+ tdm_ctrl[device_num]->device = &ofdev->dev;
-+ tdm_ctrl[device_num]->ut_info = ut_info;
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.ucc_num = ucc_num;
-+
-+ prop = of_get_property(np, "fsl,tdm-num", NULL);
-+ if (prop == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->tdm_port = *prop - 1;
-+
-+ if (tdm_ctrl[device_num]->tdm_port > 3) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ prop = of_get_property(np, "fsl,si-num", NULL);
-+ if (prop == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->si = *prop - 1;
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_clk =
-+ of_get_property(np, "fsl,tdm-tx-clk", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_clk == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_clk =
-+ of_get_property(np, "fsl,tdm-rx-clk", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_clk == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_sync =
-+ of_get_property(np, "fsl,tdm-tx-sync", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_sync == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_sync =
-+ of_get_property(np, "fsl,tdm-rx-sync", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_sync == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.irq =
-+ irq_of_parse_and_map(np, 0);
-+ err = of_address_to_resource(np, 0, &res);
-+ if (err) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+ tdm_ctrl[device_num]->ut_info->uf_info.regs = res.start;
-+ tdm_ctrl[device_num]->uf_regs = of_iomap(np, 0);
-+
-+ np_tmp = NULL;
-+ np_tmp = of_find_compatible_node(np_tmp, "slic", "legerity-slic");
-+ if (np_tmp != NULL) {
-+ tdm_ctrl[device_num]->leg_slic = 1;
-+ of_node_put(np_tmp);
-+ } else
-+ tdm_ctrl[device_num]->leg_slic = 0;
-+
-+ config_tdm(tdm_ctrl[device_num]);
-+
-+ tdm_buff = dma_alloc_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
-+ tdm_ctrl[device_num]->cfg_ctrl.active_num_ts,
-+ &physaddr, GFP_KERNEL);
-+ if (!tdm_buff) {
-+ printk(KERN_ERR "ucc-tdm: could not allocate buffer"
-+ "descriptors\n");
-+ ret = -ENOMEM;
-+ goto alloc_error;
-+ }
-+
-+ tdm_ctrl[device_num]->tdm_input_data = tdm_buff;
-+ tdm_ctrl[device_num]->dma_input_addr = physaddr;
-+
-+ tdm_ctrl[device_num]->tdm_output_data = tdm_buff + NR_BUFS *
-+ SAMPLE_DEPTH * tdm_ctrl[device_num]->cfg_ctrl.active_num_ts;
-+ tdm_ctrl[device_num]->dma_output_addr = physaddr + NR_BUFS *
-+ SAMPLE_DEPTH * tdm_ctrl[device_num]->cfg_ctrl.active_num_ts;
-+
-+ init_waitqueue_head(&(tdm_ctrl[device_num]->wakeup_event));
-+
-+ ret = tdm_init(tdm_ctrl[device_num]);
-+ if (ret != 0)
-+ goto tdm_init_error;
-+
-+ ret = tdm_start(tdm_ctrl[device_num]);
-+ if (ret != 0)
-+ goto tdm_start_error;
-+
-+ dev_set_drvdata(&(ofdev->dev), tdm_ctrl[device_num]);
-+
-+ pr_info("%s UCC based tdm module installed\n", __FUNCTION__);
-+ return 0;
-+
-+tdm_start_error:
-+ tdm_deinit(tdm_ctrl[device_num]);
-+tdm_init_error:
-+ dma_free_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
-+ tdm_ctrl[device_num]->cfg_ctrl.active_num_ts,
-+ tdm_ctrl[device_num]->tdm_input_data,
-+ tdm_ctrl[device_num]->dma_input_addr);
-+
-+alloc_error:
-+ irq_dispose_mapping(tdm_ctrl[device_num]->ut_info->uf_info.irq);
-+ iounmap(tdm_ctrl[device_num]->uf_regs);
-+
-+get_property_error:
-+ num_tdm_devices--;
-+ kfree(tdm_ctrl[device_num]);
-+ ut_info->ucc_busy = 0;
-+ return ret;
-+}
-+
-+static int ucc_tdm_remove(struct of_device *ofdev)
-+{
-+ struct tdm_ctrl *tdm_c;
-+ struct ucc_tdm_info *ut_info;
-+ u32 ucc_num;
-+
-+ tdm_c = dev_get_drvdata(&(ofdev->dev));
-+ dev_set_drvdata(&(ofdev->dev), NULL);
-+ ucc_num = tdm_c->ut_info->uf_info.ucc_num;
-+ ut_info = &utdm_info[ucc_num];
-+ tdm_stop(tdm_c);
-+ tdm_deinit(tdm_c);
-+
-+ ucc_fast_free(tdm_c->uf_private);
-+
-+ dma_free_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
-+ tdm_c->cfg_ctrl.active_num_ts,
-+ tdm_c->tdm_input_data,
-+ tdm_c->dma_input_addr);
-+
-+ irq_dispose_mapping(tdm_c->ut_info->uf_info.irq);
-+ iounmap(tdm_c->uf_regs);
-+
-+ num_tdm_devices--;
-+ kfree(tdm_c);
-+
-+ ut_info->ucc_busy = 0;
-+
-+ pr_info("%s UCC based tdm module uninstalled\n", __FUNCTION__);
-+ return 0;
-+}
-+
-+const struct of_device_id ucc_tdm_match[] = {
-+ { .type = "tdm", .compatible = "fsl,ucc-tdm", },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, ucc_tdm_match);
-+
-+static struct of_platform_driver ucc_tdm_driver = {
-+ .name = DRV_NAME,
-+ .match_table = ucc_tdm_match,
-+ .probe = ucc_tdm_probe,
-+ .remove = ucc_tdm_remove,
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init ucc_tdm_init(void)
-+{
-+ u32 i;
-+
-+ pr_info("ucc_tdm: " DRV_DESC "\n");
-+ for (i = 0; i < 8; i++)
-+ memcpy(&(utdm_info[i]), &utdm_primary_info,
-+ sizeof(utdm_primary_info));
-+
-+ return of_register_platform_driver(&ucc_tdm_driver);
-+}
-+
-+static void __exit ucc_tdm_exit(void)
-+{
-+ of_unregister_platform_driver(&ucc_tdm_driver);
-+}
-+
-+module_init(ucc_tdm_init);
-+module_exit(ucc_tdm_exit);
-+MODULE_AUTHOR("Freescale Semiconductor, Inc");
-+MODULE_DESCRIPTION(DRV_DESC);
-+MODULE_LICENSE("GPL");
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_
- obj-$(CONFIG_INTEL_MID_PTI) += pti.o
- obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
- obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
-+obj-$(CONFIG_UCC_TDM) += ucc_tdm.o
- obj-$(CONFIG_BMP085) += bmp085.o
- obj-$(CONFIG_BMP085_I2C) += bmp085-i2c.o
- obj-$(CONFIG_BMP085_SPI) += bmp085-spi.o
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -201,6 +201,20 @@ config ATMEL_SSC
-
- If unsure, say N.
-
-+config UCC_TDM
-+ tristate "Freescale UCC TDM Driver"
-+ depends on QUICC_ENGINE && UCC_FAST
-+ default n
-+ help
-+ The TDM driver is for UCC based TDM devices for example, TDM device on
-+ MPC832x RDB. Select it to run PowerVoIP on MPC832x RDB board.
-+ The TDM driver can interface with SLIC kind of devices to transmit
-+ and receive TDM samples. The TDM driver receives Time Division
-+ multiplexed samples(for different channels) from the SLIC device,
-+ demutiplexes them and sends them to the upper layers. At the transmit
-+ end the TDM drivers receives samples for different channels, it
-+ multiplexes them and sends them to the SLIC device.
-+
- config ENCLOSURE_SERVICES
- tristate "Enclosure Services"
- default n
---- a/arch/powerpc/include/asm/ucc_fast.h
-+++ b/arch/powerpc/include/asm/ucc_fast.h
-@@ -150,6 +150,10 @@ struct ucc_fast_info {
- enum ucc_fast_rx_decoding_method renc;
- enum ucc_fast_transparent_tcrc tcrc;
- enum ucc_fast_sync_len synl;
-+ char *tdm_rx_clk;
-+ char *tdm_tx_clk;
-+ char *tdm_rx_sync;
-+ char *tdm_tx_sync;
- };
-
- struct ucc_fast_private {
---- a/arch/powerpc/include/asm/qe.h
-+++ b/arch/powerpc/include/asm/qe.h
-@@ -670,6 +670,14 @@ struct ucc_slow_pram {
- #define UCC_GETH_UCCE_RXF1 0x00000002
- #define UCC_GETH_UCCE_RXF0 0x00000001
-
-+/* Transparent UCC Event Register (UCCE) */
-+#define UCC_TRANS_UCCE_GRA 0x0080
-+#define UCC_TRANS_UCCE_TXE 0x0010
-+#define UCC_TRANS_UCCE_RXF 0x0008
-+#define UCC_TRANS_UCCE_BSY 0x0004
-+#define UCC_TRANS_UCCE_TXB 0x0002
-+#define UCC_TRANS_UCCE_RXB 0x0001
-+
- /* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
- #define UCC_UART_UPSMR_FLC 0x8000
- #define UCC_UART_UPSMR_SL 0x4000
+++ /dev/null
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -98,7 +98,8 @@ src-plat-$(CONFIG_44x) += treeboot-ebony
- src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
- src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
- src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
--src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c
-+src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c \
-+ rb600.c rb333.c
- src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
- src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
- cuboot-c2k.c gamecube-head.S \
-@@ -279,6 +280,8 @@ image-$(CONFIG_MPC834x_ITX) += cuImage.
- image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds
- image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds
- image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot
-+image-$(CONFIG_RB_PPC) += dtbImage.rb600 \
-+ dtbImage.rb333
-
- # Board ports in arch/powerpc/platform/85xx/Kconfig
- image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
---- /dev/null
-+++ b/arch/powerpc/boot/dts/rb600.dts
-@@ -0,0 +1,283 @@
-+/*
-+ * RouterBOARD 600 series Device Tree Source
-+ *
-+ * Copyright 2009 Michael Guntsche <mike@it-loops.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+/dts-v1/;
-+
-+/ {
-+ model = "RB600";
-+ compatible = "MPC83xx";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ aliases {
-+ ethernet0 = &enet0;
-+ ethernet1 = &enet1;
-+ pci0 = &pci0;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 board=mpc8323 rootfstype=squashfs,yaffs2,jffs2 root=/dev/mtdblock1 boot=1";
-+ linux,stdout-path = "/soc8343@e0000000/serial@4500";
-+ };
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ PowerPC,8343E@0 {
-+ device_type = "cpu";
-+ reg = <0x0>;
-+ d-cache-line-size = <0x20>;
-+ i-cache-line-size = <0x20>;
-+ d-cache-size = <0x8000>;
-+ i-cache-size = <0x8000>;
-+ timebase-frequency = <0x0000000>; // filled by the bootwrapper from the firmware blob
-+ clock-frequency = <0x00000000>; // filled by the bootwrapper from the firmware blob
-+ };
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
-+ };
-+
-+ cf@f9200000 {
-+ lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
-+ interrupt-at-level = <0x0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x16 0x8>;
-+ lbc_extra_divider = <0x1>;
-+ reg = <0xf9200000 0x200000>;
-+ device_type = "rb,cf";
-+ };
-+
-+ cf@f9000000 {
-+ lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
-+ interrupt-at-level = <0x0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x14 0x8>;
-+ lbc_extra_divider = <0x1>;
-+ reg = <0xf9000000 0x200000>;
-+ device_type = "rb,cf";
-+ };
-+
-+ flash {
-+ reg = <0xff800000 0x20000>;
-+ };
-+
-+ nnand {
-+ reg = <0xf0000000 0x1000>;
-+ };
-+
-+ nand {
-+ ale = <&gpio 0x6>;
-+ cle = <&gpio 0x5>;
-+ nce = <&gpio 0x4>;
-+ rdy = <&gpio 0x3>;
-+ reg = <0xf8000000 0x1000>;
-+ device_type = "rb,nand";
-+ };
-+
-+ fancon {
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x17 0x8>;
-+ sense = <&gpio 0x7>;
-+ fan_on = <&gpio 0x9>;
-+ };
-+
-+ pci0: pci@e0008500 {
-+ device_type = "pci";
-+ compatible = "fsl,mpc8349-pci";
-+ reg = <0xe0008500 0x100 0xe0008300 0x8>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
-+ bus-range = <0x0 0x0>;
-+ interrupt-map = <
-+ 0x5800 0x0 0x0 0x1 &ipic 0x15 0x8
-+ 0x6000 0x0 0x0 0x1 &ipic 0x30 0x8
-+ 0x6000 0x0 0x0 0x2 &ipic 0x11 0x8
-+ 0x6800 0x0 0x0 0x1 &ipic 0x11 0x8
-+ 0x6800 0x0 0x0 0x2 &ipic 0x12 0x8
-+ 0x7000 0x0 0x0 0x1 &ipic 0x12 0x8
-+ 0x7000 0x0 0x0 0x2 &ipic 0x13 0x8
-+ 0x7800 0x0 0x0 0x1 &ipic 0x13 0x8
-+ 0x7800 0x0 0x0 0x2 &ipic 0x30 0x8
-+ 0x8000 0x0 0x0 0x1 &ipic 0x30 0x8
-+ 0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
-+ 0x8000 0x0 0x0 0x3 &ipic 0x11 0x8
-+ 0x8000 0x0 0x0 0x4 &ipic 0x13 0x8
-+ 0xa000 0x0 0x0 0x1 &ipic 0x30 0x8
-+ 0xa000 0x0 0x0 0x2 &ipic 0x11 0x8
-+ 0xa000 0x0 0x0 0x3 &ipic 0x12 0x8
-+ 0xa000 0x0 0x0 0x4 &ipic 0x13 0x8
-+ 0xa800 0x0 0x0 0x1 &ipic 0x11 0x8
-+ 0xa800 0x0 0x0 0x2 &ipic 0x12 0x8
-+ 0xa800 0x0 0x0 0x3 &ipic 0x13 0x8
-+ 0xa800 0x0 0x0 0x4 &ipic 0x30 0x8>;
-+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-+ interrupt-parent = <&ipic>;
-+ };
-+
-+ soc8343@e0000000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ device_type = "soc";
-+ compatible = "simple-bus";
-+ ranges = <0x0 0xe0000000 0x100000>;
-+ reg = <0xe0000000 0x200>;
-+ bus-frequency = <0x1>;
-+
-+ led {
-+ user_led = <0x400 0x8>;
-+ };
-+
-+ beeper {
-+ reg = <0x500 0x100>;
-+ };
-+
-+ gpio: gpio@0 {
-+ reg = <0xc08 0x4>;
-+ device-id = <0x0>;
-+ compatible = "gpio";
-+ device_type = "gpio";
-+ };
-+
-+ dma@82a8 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-+ reg = <0x82a8 4>;
-+ ranges = <0 0x8100 0x1a8>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ cell-index = <0>;
-+ dma-channel@0 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0 0x80>;
-+ cell-index = <0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@80 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x80 0x80>;
-+ cell-index = <1>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@100 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x100 0x80>;
-+ cell-index = <2>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@180 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x180 0x28>;
-+ cell-index = <3>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ };
-+
-+ enet0: ethernet@25000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ cell-index = <0>;
-+ phy-handle = <&phy0>;
-+ tbi-handle = <&tbi0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ reg = <0x25000 0x1000>;
-+ ranges = <0x0 0x25000 0x1000>;
-+ compatible = "gianfar";
-+ model = "TSEC";
-+ device_type = "network";
-+
-+ mdio@520 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "fsl,gianfar-tbi";
-+ reg = <0x520 0x20>;
-+
-+ tbi0: tbi-phy@11 {
-+ reg = <0x11>;
-+ device_type = "tbi-phy";
-+ };
-+ };
-+ };
-+
-+ enet1: ethernet@24000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ cell-index = <1>;
-+ phy-handle = <&phy1>;
-+ tbi-handle = <&tbi1>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ reg = <0x24000 0x1000>;
-+ ranges = <0x0 0x24000 0x1000>;
-+ compatible = "gianfar";
-+ model = "TSEC";
-+ device_type = "network";
-+
-+ mdio@520 {
-+ #size-cells = <0x0>;
-+ #address-cells = <0x1>;
-+ reg = <0x520 0x20>;
-+ compatible = "fsl,gianfar-mdio";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0x0>;
-+ };
-+
-+ phy1: ethernet-phy@1 {
-+ device_type = "ethernet-phy";
-+ reg = <0x1>;
-+ };
-+
-+ tbi1: tbi-phy@11 {
-+ reg = <0x11>;
-+ device_type = "tbi-phy";
-+ };
-+ };
-+ };
-+
-+ ipic: pic@700 {
-+ interrupt-controller;
-+ #address-cells = <0>;
-+ #interrupt-cells = <2>;
-+ reg = <0x700 0x100>;
-+ device_type = "ipic";
-+ };
-+
-+ serial@4500 {
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x9 0x8>;
-+ clock-frequency = <0xfe4f840>;
-+ reg = <0x4500 0x100>;
-+ compatible = "ns16550";
-+ device_type = "serial";
-+ };
-+
-+ wdt@200 {
-+ reg = <0x200 0x100>;
-+ compatible = "mpc83xx_wdt";
-+ device_type = "watchdog";
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/powerpc/boot/rb600.c
-@@ -0,0 +1,70 @@
-+/*
-+ * The RouterBOARD platform -- for booting RB600(A) RouterBOARDs.
-+ *
-+ * Author: Michael Guntsche <mike@it-loops.com>
-+ *
-+ * Copyright (c) 2009 Michael Guntsche
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "types.h"
-+#include "io.h"
-+#include "stdio.h"
-+#include <libfdt.h>
-+
-+BSS_STACK(4*1024);
-+
-+u64 memsize64;
-+const void *fw_dtb;
-+
-+static void rb600_fixups(void)
-+{
-+ const u32 *reg, *timebase, *clock;
-+ int node, size;
-+
-+ dt_fixup_memory(0, memsize64);
-+
-+ /* Set the MAC addresses. */
-+ node = fdt_path_offset(fw_dtb, "/soc8343@e0000000/ethernet@24000");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet1", (const u8 *)reg);
-+
-+ node = fdt_path_offset(fw_dtb, "/soc8343@e0000000/ethernet@25000");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet0", (const u8 *)reg);
-+
-+ /* Find the CPU timebase and clock frequencies. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "cpu", sizeof("cpu"));
-+ timebase = fdt_getprop(fw_dtb, node, "timebase-frequency", &size);
-+ clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
-+ dt_fixup_cpu_clocks(*clock, *timebase, 0);
-+
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+ unsigned long r6, unsigned long r7)
-+{
-+ const u32 *reg;
-+ int node, size;
-+
-+ fw_dtb = (const void *)r3;
-+
-+ /* Find the memory range. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "memory", sizeof("memory"));
-+ reg = fdt_getprop(fw_dtb, node, "reg", &size);
-+ memsize64 = reg[1];
-+
-+ /* Now we have the memory size; initialize the heap. */
-+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
-+
-+ /* Prepare the device tree and find the console. */
-+ fdt_init(_dtb_start);
-+ serial_console_init();
-+
-+ /* Remaining fixups... */
-+ platform_ops.fixups = rb600_fixups;
-+}
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -238,7 +238,7 @@ ps3)
- make_space=n
- pie=
- ;;
--ep88xc|ep405|ep8248e)
-+ep88xc|ep405|ep8248e|rb600|rb333)
- platformo="$object/fixed-head.o $object/$platform.o"
- binary=y
- ;;
---- a/arch/powerpc/platforms/83xx/Kconfig
-+++ b/arch/powerpc/platforms/83xx/Kconfig
-@@ -38,6 +38,15 @@ config MPC832x_RDB
- help
- This option enables support for the MPC8323 RDB board.
-
-+config RB_PPC
-+ bool "MikroTik RouterBOARD 333/600 series"
-+ select DEFAULT_UIMAGE
-+ select QUICC_ENGINE
-+ select PPC_MPC832x
-+ select PPC_MPC834x
-+ help
-+ This option enables support for MikroTik RouterBOARD 333/600 series boards.
-+
- config MPC834x_MDS
- bool "Freescale MPC834x MDS"
- select DEFAULT_UIMAGE
---- /dev/null
-+++ b/arch/powerpc/boot/dts/rb333.dts
-@@ -0,0 +1,426 @@
-+
-+/*
-+ * RouterBOARD 333 series Device Tree Source
-+ *
-+ * Copyright 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ * Copyright 2009 Michael Guntsche <mike@it-loops.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * Warning (reg_format): "reg" property in /qe@e0100000/muram@10000/data-only@0 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
-+ * Warning (ranges_format): "ranges" property in /qe@e0100000/muram@10000 has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1)
-+ * Warning (avoid_default_addr_size): Relying on default #address-cells value for /qe@e0100000/muram@10000/data-only@0
-+ * Warning (avoid_default_addr_size): Relying on default #size-cells value for /qe@e0100000/muram@10000/data-only@0
-+ * Warning (obsolete_chosen_interrupt_controller): /chosen has obsolete "interrupt-controller" property
-+ *
-+ */
-+
-+
-+/dts-v1/;
-+
-+/ {
-+ model = "RB333";
-+ compatible = "MPC83xx";
-+ #size-cells = <1>;
-+ #address-cells = <1>;
-+
-+ aliases {
-+ ethernet0 = &enet0;
-+ ethernet1 = &enet1;
-+ ethernet2 = &enet2;
-+ pci0 = &pci0;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 board=mpc8323 rootfstype=squashfs,yaffs2,jffs2 root=/dev/mtdblock1 boot=1";
-+ // linux,platform = <0x8062>;
-+ // linux,initrd = <0x488000 0x0>;
-+ linux,stdout-path = "/soc8323@e0000000/serial@4500";
-+ // interrupt-controller = <&ipic>;
-+ };
-+
-+ cpus {
-+ #cpus = <1>;
-+ #size-cells = <0>;
-+ #address-cells = <1>;
-+
-+ PowerPC,8323E@0 {
-+ device_type = "cpu";
-+ reg = <0x0>;
-+ i-cache-size = <0x4000>;
-+ d-cache-size = <0x4000>;
-+ i-cache-line-size = <0x20>;
-+ d-cache-line-size = <0x20>;
-+ // clock-frequency = <0x13de3650>;
-+ // timebase-frequency = <0x1fc9f08>;
-+ timebase-frequency = <0x0000000>; // filled by the bootwrapper from the firmware blob
-+ clock-frequency = <0x00000000>; // filled by the bootwrapper from the firmware blob
-+ 32-bit;
-+ };
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x0 0x4000000>;
-+ // reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
-+ };
-+
-+ flash {
-+ reg = <0xfe000000 0x20000>;
-+ };
-+
-+ nand {
-+ ale = <&gpio2 0x3>;
-+ cle = <&gpio2 0x2>;
-+ nce = <&gpio2 0x1>;
-+ rdy = <&gpio2 0x0>;
-+ reg = <0xf8000000 0x1000>;
-+ device_type = "rb,nand";
-+ };
-+
-+ nnand {
-+ reg = <0xf0000000 0x1000>;
-+ };
-+
-+ voltage {
-+ voltage_gpio = <&gpio3 0x11>;
-+ };
-+
-+ fancon {
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x14 0x8>;
-+ fan_on = <&gpio0 0x10>;
-+ };
-+
-+ soc8323@e0000000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ device_type = "soc";
-+ compatible = "simple-bus";
-+ ranges = <0x0 0xe0000000 0x00100000>;
-+ reg = <0xe0000000 0x00000200>;
-+ bus-frequency = <1>;
-+
-+ wdt@200 {
-+ device_type = "watchdog";
-+ compatible = "mpc83xx_wdt";
-+ reg = <0x200 0x100>;
-+ };
-+
-+ ipic:pic@700 {
-+ interrupt-controller;
-+ #address-cells = <0>;
-+ #interrupt-cells = <2>;
-+ reg = <0x700 0x100>;
-+ device_type = "ipic";
-+ };
-+
-+ par_io@1400 {
-+ num-ports = <4>;
-+ device_type = "par_io";
-+ reg = <0x1400 0x100>;
-+
-+ ucc2pio: ucc_pin@02 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 3 4 3 0 2 0
-+ 3 5 1 0 2 0
-+ 0 18 1 0 1 0
-+ 0 19 1 0 1 0
-+ 0 20 1 0 1 0
-+ 0 21 1 0 1 0
-+ 0 30 1 0 1 0
-+ 3 6 2 0 1 0
-+ 0 29 2 0 1 0
-+ 0 31 2 0 1 0
-+ 0 22 2 0 1 0
-+ 0 23 2 0 1 0
-+ 0 24 2 0 1 0
-+ 0 25 2 0 1 0
-+ 0 28 2 0 1 0
-+ 0 26 2 0 1 0
-+ 3 31 2 0 1 0>;
-+ };
-+
-+ ucc3pio: ucc_pin@03 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 1 0 1 0 1 0
-+ 1 1 1 0 1 0
-+ 1 2 1 0 1 0
-+ 1 3 1 0 1 0
-+ 1 12 1 0 1 0
-+ 3 24 2 0 1 0
-+ 1 11 2 0 1 0
-+ 1 13 2 0 1 0
-+ 1 4 2 0 1 0
-+ 1 5 2 0 1 0
-+ 1 6 2 0 1 0
-+ 1 7 2 0 1 0
-+ 1 10 2 0 1 0
-+ 1 8 2 0 1 0
-+ 3 29 2 0 1 0>;
-+ };
-+
-+ ucc4pio: ucc_pin@04 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 1 18 1 0 1 0
-+ 1 19 1 0 1 0
-+ 1 20 1 0 1 0
-+ 1 21 1 0 1 0
-+ 1 30 1 0 1 0
-+ 3 20 2 0 1 0
-+ 1 30 2 0 1 0
-+ 1 31 2 0 1 0
-+ 1 22 2 0 1 0
-+ 1 23 2 0 1 0
-+ 1 24 2 0 1 0
-+ 1 25 2 0 1 0
-+ 1 28 2 0 1 0
-+ 1 26 2 0 1 0
-+ 3 21 2 0 1 0>;
-+ };
-+ };
-+
-+ serial0: serial@4500 {
-+ cell-index = <0>;
-+ device_type = "serial";
-+ compatible = "fsl,ns16550", "ns16550";
-+ reg = <0x4500 0x100>;
-+ clock-frequency = <0x7f27c20>;
-+ interrupts = <9 0x8>;
-+ interrupt-parent = <&ipic>;
-+ };
-+
-+ dma@82a8 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
-+ reg = <0x82a8 4>;
-+ ranges = <0 0x8100 0x1a8>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ cell-index = <0>;
-+ dma-channel@0 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0 0x80>;
-+ cell-index = <0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@80 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x80 0x80>;
-+ cell-index = <1>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@100 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x100 0x80>;
-+ cell-index = <2>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@180 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x180 0x28>;
-+ cell-index = <3>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ };
-+
-+ beeper {
-+ gpio = <&gpio3 0x12>;
-+ reg = <0x500 0x100>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x48 0x8>;
-+ };
-+
-+ gpio3: gpio@3 {
-+ reg = <0x144c 0x4>;
-+ device-id = <0x3>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+
-+ gpio2: gpio@2 {
-+ reg = <0x1434 0x4>;
-+ device-id = <0x2>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+
-+ gpio0: gpio@0 {
-+ reg = <0x1404 0x4>;
-+ device-id = <0x0>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+ };
-+
-+ pci0: pci@e0008500 {
-+ device_type = "pci";
-+ // compatible = "83xx";
-+ compatible = "fsl,mpc8349-pci";
-+ reg = <0xe0008500 0x100 0xe0008300 0x8>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ // clock-frequency = <0>;
-+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
-+ bus-range = <0x0 0x0>;
-+ interrupt-map = <
-+ /* IDSEL 0x10 AD16 miniPCI slot 0 */
-+ 0x8000 0x0 0x0 0x1 &ipic 0x11 0x8
-+ 0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
-+
-+ /* IDSEL 0x11 AD17 miniPCI slot 1 */
-+ 0x8800 0x0 0x0 0x1 &ipic 0x12 0x8
-+ 0x8800 0x0 0x0 0x2 &ipic 0x13 0x8
-+
-+ /* IDSEL 0x12 AD18 miniPCI slot 2 */
-+ 0x9000 0x0 0x0 0x1 &ipic 0x13 0x8
-+ 0x9000 0x0 0x0 0x2 &ipic 0x11 0x8>;
-+
-+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-+ interrupt-parent = <&ipic>;
-+ // interrupts = <66 0x8>;
-+ };
-+
-+ qe@e0100000 {
-+ reg = <0xe0100000 0x480>;
-+ ranges = <0x0 0xe0100000 0x100000>;
-+ model = "QE";
-+ device_type = "qe";
-+ compatible = "fsl,qe";
-+ #size-cells = <1>;
-+ #address-cells = <1>;
-+ brg-frequency = <0>;
-+ bus-frequency = <0>;
-+ // bus-frequency = <198000000>;
-+ fsl,qe-num-riscs = <1>;
-+ fsl,qe-num-snums = <28>;
-+
-+ qeic: qeic@80 {
-+ interrupt-controller;
-+ compatible = "fsl,qe-ic";
-+ big-endian;
-+ built-in;
-+ reg = <0x80 0x80>;
-+ #interrupt-cells = <1>;
-+ #address-cells = <0>;
-+ device_type = "qeic";
-+ interrupts = <0x20 0x8 0x21 0x8>;
-+ interrupt-parent = <&ipic>;
-+ };
-+
-+ mdio@2120 {
-+ compatible = "ucc_geth_phy";
-+ device_type = "mdio";
-+ reg = <0x3120 0x18>;
-+ #size-cells = <0>;
-+ #address-cells = <1>;
-+
-+ phy3: ethernet-phy@03 {
-+ // interface = <0x3>;
-+ device_type = "ethernet-phy";
-+ reg = <0x3>;
-+ };
-+
-+ phy2: ethernet-phy@02 {
-+ // interface = <0x3>;
-+ device_type = "ethernet-phy";
-+ reg = <0x2>;
-+ };
-+
-+ phy1: ethernet-phy@01 {
-+ // interface = <0x3>;
-+ device_type = "ethernet-phy";
-+ reg = <0x1>;
-+ };
-+ };
-+
-+ enet0: ucc@2200 {
-+ tx-clock = <0x1a>;
-+ rx-clock = <0x1f>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x22>;
-+ reg = <0x2200 0x200>;
-+ device-id = <0x3>;
-+ model = "UCC";
-+ compatible = "ucc_geth";
-+ device_type = "network";
-+ phy-handle = <&phy2>;
-+ pio-handle = <&ucc3pio>;
-+ };
-+
-+ enet1: ucc@3200 {
-+ tx-clock = <0x22>;
-+ rx-clock = <0x20>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x23>;
-+ reg = <0x3200 0x200>;
-+ device-id = <0x4>;
-+ model = "UCC";
-+ compatible = "ucc_geth";
-+ device_type = "network";
-+ phy-handle = <&phy3>;
-+ pio-handle = <&ucc4pio>;
-+ };
-+
-+ enet2: ucc@3000 {
-+ tx-clock = <0x18>;
-+ rx-clock = <0x17>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x21>;
-+ reg = <0x3000 0x200>;
-+ device-id = <0x2>;
-+ model = "UCC";
-+ compatible = "ucc_geth";
-+ device_type = "network";
-+ phy-handle = <&phy1>;
-+ pio-handle = <&ucc2pio>;
-+ };
-+
-+ spi@500 {
-+ mode = "cpu";
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x1>;
-+ reg = <0x500 0x40>;
-+ compatible = "fsl,spi";
-+ device_type = "spi";
-+ };
-+
-+ spi@4c0 {
-+ mode = "cpu";
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x2>;
-+ reg = <0x4c0 0x40>;
-+ compatible = "fsl,spi";
-+ device_type = "spi";
-+ };
-+
-+ muram@10000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
-+ ranges = <0x0 0x10000 0x4000>;
-+ device_type = "muram";
-+
-+ data-only@0 {
-+ compatible = "fsl,qe-muram-data",
-+ "fsl,cpm-muram-data";
-+ reg = <0x0 0x4000>;
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/powerpc/boot/rb333.c
-@@ -0,0 +1,86 @@
-+/*
-+ * The RouterBOARD platform -- for booting RB333 RouterBOARDs.
-+ *
-+ * Author: Alexandros C. Couloumbis <alex@ozo.com>
-+ * Author: Michael Guntsche <mike@it-loops.com>
-+ *
-+ * Copyright (c) 2010 Alexandros C. Couloumbis
-+ * Copyright (c) 2009 Michael Guntsche
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "types.h"
-+#include "io.h"
-+#include "stdio.h"
-+#include <libfdt.h>
-+
-+BSS_STACK(4*1024);
-+
-+u64 memsize64;
-+const void *fw_dtb;
-+
-+static void rb333_fixups(void)
-+{
-+ const u32 *reg, *timebase, *clock;
-+ int node, size;
-+ void *chosen;
-+ const char* bootargs;
-+
-+ dt_fixup_memory(0, memsize64);
-+
-+ /* Find the CPU timebase and clock frequencies. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "cpu", sizeof("cpu"));
-+ timebase = fdt_getprop(fw_dtb, node, "timebase-frequency", &size);
-+ clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
-+ dt_fixup_cpu_clocks(*clock, *timebase, 0);
-+
-+ /* Set the MAC addresses. */
-+ node = fdt_path_offset(fw_dtb, "/qe@e0100000/ucc@2200");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet0", (const u8 *)reg);
-+
-+ node = fdt_path_offset(fw_dtb, "/qe@e0100000/ucc@3200");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet1", (const u8 *)reg);
-+
-+ node = fdt_path_offset(fw_dtb, "/qe@e0100000/ucc@3000");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet2", (const u8 *)reg);
-+
-+ /* Fixup chosen
-+ * The bootloader reads the kernelparm segment and adds the content to
-+ * bootargs. This is needed to specify root and other boot flags.
-+ */
-+ chosen = finddevice("/chosen");
-+ node = fdt_path_offset(fw_dtb, "/chosen");
-+ bootargs = fdt_getprop(fw_dtb, node, "bootargs", &size);
-+ setprop_str(chosen, "bootargs", bootargs);
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+ unsigned long r6, unsigned long r7)
-+{
-+ const u32 *reg;
-+ int node, size;
-+
-+ fw_dtb = (const void *)r3;
-+
-+ /* Find the memory range. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "memory", sizeof("memory"));
-+ reg = fdt_getprop(fw_dtb, node, "reg", &size);
-+ memsize64 = reg[1];
-+
-+ /* Now we have the memory size; initialize the heap. */
-+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
-+
-+ /* Prepare the device tree and find the console. */
-+ fdt_init(_dtb_start);
-+ serial_console_init();
-+
-+ /* Remaining fixups... */
-+ platform_ops.fixups = rb333_fixups;
-+}
---- /dev/null
-+++ b/arch/powerpc/platforms/83xx/rbppc.c
-@@ -0,0 +1,388 @@
-+/*
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/root_dev.h>
-+#include <linux/initrd.h>
-+#include <linux/interrupt.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_device.h>
-+#include <linux/of_platform.h>
-+#include <linux/pci.h>
-+#include <asm/time.h>
-+#include <asm/ipic.h>
-+#include <asm/udbg.h>
-+#include <asm/qe.h>
-+#include <asm/qe_ic.h>
-+#include <sysdev/fsl_soc.h>
-+#include <sysdev/fsl_pci.h>
-+#include "mpc83xx.h"
-+
-+#define SYSCTL 0x100
-+#define SICRL 0x014
-+
-+#define GTCFR2 0x04
-+#define GTMDR4 0x22
-+#define GTRFR4 0x26
-+#define GTCNR4 0x2e
-+#define GTVER4 0x36
-+#define GTPSR4 0x3e
-+
-+#define GTCFR_BCM 0x40
-+#define GTCFR_STP4 0x20
-+#define GTCFR_RST4 0x10
-+#define GTCFR_STP3 0x02
-+#define GTCFR_RST3 0x01
-+
-+#define GTMDR_ORI 0x10
-+#define GTMDR_FRR 0x08
-+#define GTMDR_ICLK16 0x04
-+
-+extern int par_io_data_set(u8 port, u8 pin, u8 val);
-+extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-+ int assignment, int has_irq);
-+
-+static unsigned timer_freq;
-+static void *gtm;
-+
-+static int beeper_irq;
-+static unsigned beeper_gpio_pin[2];
-+
-+int rb333model = 0;
-+
-+irqreturn_t rbppc_timer_irq(int irq, void *ptr)
-+{
-+ static int toggle = 0;
-+
-+ par_io_data_set(beeper_gpio_pin[0], beeper_gpio_pin[1], toggle);
-+ toggle = !toggle;
-+
-+ /* ack interrupt */
-+ out_be16(gtm + GTVER4, 3);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+void rbppc_beep(unsigned freq)
-+{
-+ unsigned gtmdr;
-+
-+ if (freq > 5000) freq = 5000;
-+
-+ if (!gtm)
-+ return;
-+ if (!freq) {
-+ out_8(gtm + GTCFR2, GTCFR_STP4 | GTCFR_STP3);
-+ return;
-+ }
-+
-+ out_8(gtm + GTCFR2, GTCFR_RST4 | GTCFR_STP3);
-+ out_be16(gtm + GTPSR4, 255);
-+ gtmdr = GTMDR_FRR | GTMDR_ICLK16;
-+ if (beeper_irq != NO_IRQ) gtmdr |= GTMDR_ORI;
-+ out_be16(gtm + GTMDR4, gtmdr);
-+ out_be16(gtm + GTVER4, 3);
-+
-+ out_be16(gtm + GTRFR4, timer_freq / 16 / 256 / freq / 2);
-+ out_be16(gtm + GTCNR4, 0);
-+}
-+EXPORT_SYMBOL(rbppc_beep);
-+
-+static void __init rbppc_setup_arch(void)
-+{
-+ struct device_node *np;
-+
-+ np = of_find_node_by_type(NULL, "cpu");
-+ if (np) {
-+ const unsigned *fp = of_get_property(np, "clock-frequency", NULL);
-+ loops_per_jiffy = fp ? *fp / HZ : 0;
-+
-+ of_node_put(np);
-+ }
-+
-+ np = of_find_node_by_name(NULL, "serial");
-+ if (np) {
-+ timer_freq =
-+ *(unsigned *) of_get_property(np, "clock-frequency", NULL);
-+ of_node_put(np);
-+ }
-+
-+#ifdef CONFIG_PCI
-+ np = of_find_node_by_type(NULL, "pci");
-+ if (np) {
-+ mpc83xx_add_bridge(np);
-+ }
-+#endif
-+
-+if (rb333model) {
-+
-+#ifdef CONFIG_QUICC_ENGINE
-+ qe_reset();
-+
-+ if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
-+ par_io_init(np);
-+ of_node_put(np);
-+
-+ for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
-+ par_io_of_config(np);
-+ }
-+#endif
-+
-+} /* RB333 */
-+
-+}
-+
-+void __init rbppc_init_IRQ(void)
-+{
-+ struct device_node *np;
-+
-+ np = of_find_node_by_type(NULL, "ipic");
-+ if (np) {
-+ ipic_init(np, 0);
-+ ipic_set_default_priority();
-+ of_node_put(np);
-+ }
-+
-+if (rb333model) {
-+
-+#ifdef CONFIG_QUICC_ENGINE
-+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-+ if (!np) {
-+ np = of_find_node_by_type(NULL, "qeic");
-+ if (!np)
-+ return;
-+ }
-+ qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-+ of_node_put(np);
-+#endif /* CONFIG_QUICC_ENGINE */
-+
-+} /* RB333 */
-+
-+}
-+
-+static int __init rbppc_probe(void)
-+{
-+ char *model;
-+
-+ model = of_get_flat_dt_prop(of_get_flat_dt_root(), "model", NULL);
-+
-+ if (!model)
-+ return 0;
-+
-+ if (strcmp(model, "RB333") == 0) {
-+ rb333model = 1;
-+ return 1;
-+ }
-+
-+ if (strcmp(model, "RB600") == 0)
-+ return 1;
-+
-+ return 0;
-+}
-+
-+static void __init rbppc_beeper_init(struct device_node *beeper)
-+{
-+ struct resource res;
-+ struct device_node *gpio;
-+ const unsigned *pin;
-+ const unsigned *gpio_id;
-+
-+ if (of_address_to_resource(beeper, 0, &res)) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: No region specified\n", beeper->full_name);
-+ return;
-+ }
-+
-+ pin = of_get_property(beeper, "gpio", NULL);
-+ if (pin) {
-+ gpio = of_find_node_by_phandle(pin[0]);
-+
-+ if (!gpio) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: GPIO handle %x not found\n", beeper->full_name, pin[0]);
-+ return;
-+ }
-+
-+ gpio_id = of_get_property(gpio, "device-id", NULL);
-+ if (!gpio_id) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: No device-id specified in GPIO\n", beeper->full_name);
-+ return;
-+ }
-+
-+ beeper_gpio_pin[0] = *gpio_id;
-+ beeper_gpio_pin[1] = pin[1];
-+
-+ par_io_config_pin(*gpio_id, pin[1], 1, 0, 0, 0);
-+ } else {
-+ void *sysctl;
-+
-+ sysctl = ioremap_nocache(get_immrbase() + SYSCTL, 0x100);
-+ out_be32(sysctl + SICRL,
-+ in_be32(sysctl + SICRL) | (1 << (31 - 19)));
-+ iounmap(sysctl);
-+ }
-+
-+ gtm = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ beeper_irq = irq_of_parse_and_map(beeper, 0);
-+ if (beeper_irq != NO_IRQ) {
-+ int e = request_irq(beeper_irq, rbppc_timer_irq, 0, "beeper", NULL);
-+ if (e) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Request of beeper irq failed!\n", beeper->full_name);
-+ }
-+ }
-+}
-+
-+#define SBIT(x) (0x80000000 >> (x))
-+#define DBIT(x, y) ((y) << (32 - (((x % 16) + 1) * 2)))
-+
-+#define GPIO_DIR_RB333(x) ((x) + (0x1408 >> 2))
-+#define GPIO_DATA_RB333(x) ((x) + (0x1404 >> 2))
-+
-+#define SICRL_RB600(x) ((x) + (0x114 >> 2))
-+#define GPIO_DIR_RB600(x) ((x) + (0xc00 >> 2))
-+#define GPIO_DATA_RB600(x) ((x) + (0xc08 >> 2))
-+
-+static void rbppc_restart(char *cmd)
-+{
-+ __be32 __iomem *reg;
-+ unsigned rb_model;
-+ struct device_node *root;
-+ unsigned int size;
-+
-+ root = of_find_node_by_path("/");
-+ if (root) {
-+ const char *prop = (char *) of_get_property(root, "model", &size);
-+ rb_model = prop[sizeof("RB") - 1] - '0';
-+ of_node_put(root);
-+ switch (rb_model) {
-+ case 3:
-+ reg = ioremap(get_immrbase(), 0x2000);
-+ local_irq_disable();
-+ out_be32(GPIO_DIR_RB333(reg),
-+ (in_be32(GPIO_DIR_RB333(reg)) & ~DBIT(4, 3)) | DBIT(4, 1));
-+ out_be32(GPIO_DATA_RB333(reg), in_be32(GPIO_DATA_RB333(reg)) & ~SBIT(4));
-+ break;
-+ case 6:
-+ reg = ioremap(get_immrbase(), 0x1000);
-+ local_irq_disable();
-+ out_be32(SICRL_RB600(reg), in_be32(SICRL_RB600(reg)) & ~0x00800000);
-+ out_be32(GPIO_DIR_RB600(reg), in_be32(GPIO_DIR_RB600(reg)) | SBIT(2));
-+ out_be32(GPIO_DATA_RB600(reg), in_be32(GPIO_DATA_RB600(reg)) & ~SBIT(2));
-+ break;
-+ default:
-+ mpc83xx_restart(cmd);
-+ break;
-+ }
-+ }
-+ else mpc83xx_restart(cmd);
-+
-+ for (;;) ;
-+}
-+
-+static void rbppc_halt(void)
-+{
-+ while (1);
-+}
-+
-+static struct of_device_id rbppc_ids[] = {
-+ { .type = "soc", },
-+ { .compatible = "soc", },
-+ { .compatible = "simple-bus", },
-+ { .type = "qe", },
-+ { .compatible = "fsl,qe", },
-+ { .compatible = "gianfar", },
-+ { },
-+};
-+
-+static int __init rbppc_declare_of_platform_devices(void)
-+{
-+ struct device_node *np;
-+ unsigned idx;
-+
-+ of_platform_bus_probe(NULL, rbppc_ids, NULL);
-+
-+ np = of_find_node_by_type(NULL, "mdio");
-+ if (np) {
-+ unsigned len;
-+ unsigned *res;
-+ const unsigned *eres;
-+ struct device_node *ep;
-+
-+ ep = of_find_compatible_node(NULL, "network", "ucc_geth");
-+ if (ep) {
-+ eres = of_get_property(ep, "reg", &len);
-+ res = (unsigned *) of_get_property(np, "reg", &len);
-+ if (res && eres) {
-+ res[0] = eres[0] + 0x120;
-+ }
-+ }
-+ }
-+
-+ np = of_find_node_by_name(NULL, "nand");
-+ if (np) {
-+ of_platform_device_create(np, "nand", NULL);
-+ }
-+
-+ idx = 0;
-+ for_each_node_by_type(np, "rb,cf") {
-+ char dev_name[12];
-+ snprintf(dev_name, sizeof(dev_name), "cf.%u", idx);
-+ of_platform_device_create(np, dev_name, NULL);
-+ ++idx;
-+ }
-+
-+ np = of_find_node_by_name(NULL, "beeper");
-+ if (np) {
-+ rbppc_beeper_init(np);
-+ }
-+
-+ return 0;
-+}
-+machine_device_initcall(rb600, rbppc_declare_of_platform_devices);
-+
-+define_machine(rb600) {
-+ .name = "MikroTik RouterBOARD 333/600 series",
-+ .probe = rbppc_probe,
-+ .setup_arch = rbppc_setup_arch,
-+ .init_IRQ = rbppc_init_IRQ,
-+ .get_irq = ipic_get_irq,
-+ .restart = rbppc_restart,
-+ .halt = rbppc_halt,
-+ .time_init = mpc83xx_time_init,
-+ .calibrate_decr = generic_calibrate_decr,
-+};
-+
-+static void fixup_pcibridge(struct pci_dev *dev)
-+{
-+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
-+ /* let the kernel itself set right memory windows */
-+ pci_write_config_word(dev, PCI_MEMORY_BASE, 0);
-+ pci_write_config_word(dev, PCI_MEMORY_LIMIT, 0);
-+ pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0);
-+ pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
-+ pci_write_config_byte(dev, PCI_IO_BASE, 0);
-+ pci_write_config_byte(dev, PCI_IO_LIMIT, 4 << 4);
-+
-+ pci_write_config_byte(
-+ dev, PCI_COMMAND,
-+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
-+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
-+ }
-+}
-+
-+
-+static void fixup_rb604(struct pci_dev *dev)
-+{
-+ pci_write_config_byte(dev, 0xC0, 0x01);
-+}
-+
-+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_pcibridge)
-+DECLARE_PCI_FIXUP_HEADER(0x3388, 0x0021, fixup_rb604)
+++ /dev/null
---- a/arch/powerpc/kernel/Makefile
-+++ b/arch/powerpc/kernel/Makefile
-@@ -119,9 +119,11 @@ obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
- obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
- obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
-
-+ifneq ($(CONFIG_RB_IOMAP),y)
- ifneq ($(CONFIG_PPC_INDIRECT_PIO),y)
- obj-y += iomap.o
- endif
-+endif
-
- obj64-$(CONFIG_PPC_TRANSACTIONAL_MEM) += tm.o
-
---- a/arch/powerpc/platforms/83xx/Makefile
-+++ b/arch/powerpc/platforms/83xx/Makefile
-@@ -7,6 +7,7 @@ obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mp
- obj-$(CONFIG_MPC830x_RDB) += mpc830x_rdb.o
- obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o
- obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o
-+obj-$(CONFIG_RB_PPC) += rbppc.o
- obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
- obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
- obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o
---- a/arch/powerpc/platforms/Kconfig
-+++ b/arch/powerpc/platforms/Kconfig
-@@ -211,6 +211,10 @@ config PPC_INDIRECT_MMIO
- config PPC_IO_WORKAROUNDS
- bool
-
-+config RB_IOMAP
-+ bool
-+ default y if RB_PPC
-+
- source "drivers/cpufreq/Kconfig"
-
- menu "CPUIdle driver"
---- a/arch/powerpc/sysdev/Makefile
-+++ b/arch/powerpc/sysdev/Makefile
-@@ -73,3 +73,6 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -
- obj-$(CONFIG_PPC_XICS) += xics/
-
- obj-$(CONFIG_GE_FPGA) += ge/
-+
-+obj-$(CONFIG_RB_IOMAP) += rb_iomap.o
-+
---- /dev/null
-+++ b/arch/powerpc/sysdev/rb_iomap.c
-@@ -0,0 +1,204 @@
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+#include <linux/mm.h>
-+#include <asm/io.h>
-+
-+#define LOCALBUS_START 0x40000000
-+#define LOCALBUS_MASK 0x007fffff
-+#define LOCALBUS_REGMASK 0x001fffff
-+
-+static void __iomem *localbus_base;
-+
-+static inline int is_localbus(void __iomem *addr)
-+{
-+ return ((unsigned) addr & ~LOCALBUS_MASK) == LOCALBUS_START;
-+}
-+
-+static inline unsigned localbus_regoff(unsigned reg) {
-+ return (reg << 16) | (((reg ^ 8) & 8) << 17);
-+}
-+
-+static inline void __iomem *localbus_addr(void __iomem *addr)
-+{
-+ return localbus_base
-+ + ((unsigned) addr & LOCALBUS_MASK & ~LOCALBUS_REGMASK)
-+ + localbus_regoff((unsigned) addr & LOCALBUS_REGMASK);
-+}
-+
-+unsigned int ioread8(void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ return in_be16(localbus_addr(addr)) >> 8;
-+ return readb(addr);
-+}
-+EXPORT_SYMBOL(ioread8);
-+
-+unsigned int ioread16(void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ return le16_to_cpu(in_be16(localbus_addr(addr)));
-+ return readw(addr);
-+}
-+EXPORT_SYMBOL(ioread16);
-+
-+unsigned int ioread16be(void __iomem *addr)
-+{
-+ return in_be16(addr);
-+}
-+EXPORT_SYMBOL(ioread16be);
-+
-+unsigned int ioread32(void __iomem *addr)
-+{
-+ return readl(addr);
-+}
-+EXPORT_SYMBOL(ioread32);
-+
-+unsigned int ioread32be(void __iomem *addr)
-+{
-+ return in_be32(addr);
-+}
-+EXPORT_SYMBOL(ioread32be);
-+
-+void iowrite8(u8 val, void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ out_be16(localbus_addr(addr), ((u16) val) << 8);
-+ else
-+ writeb(val, addr);
-+}
-+EXPORT_SYMBOL(iowrite8);
-+
-+void iowrite16(u16 val, void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ out_be16(localbus_addr(addr), cpu_to_le16(val));
-+ else
-+ writew(val, addr);
-+}
-+EXPORT_SYMBOL(iowrite16);
-+
-+void iowrite16be(u16 val, void __iomem *addr)
-+{
-+ out_be16(addr, val);
-+}
-+EXPORT_SYMBOL(iowrite16be);
-+
-+void iowrite32(u32 val, void __iomem *addr)
-+{
-+ writel(val, addr);
-+}
-+EXPORT_SYMBOL(iowrite32);
-+
-+void iowrite32be(u32 val, void __iomem *addr)
-+{
-+ out_be32(addr, val);
-+}
-+EXPORT_SYMBOL(iowrite32be);
-+
-+void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ u8 *buf = dst;
-+
-+ for (i = 0; i < count; ++i) {
-+ *buf++ = in_be16(laddr) >> 8;
-+ }
-+ } else {
-+ _insb((u8 __iomem *) addr, dst, count);
-+ }
-+}
-+EXPORT_SYMBOL(ioread8_rep);
-+
-+void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ u16 *buf = dst;
-+
-+ for (i = 0; i < count; ++i) {
-+ *buf++ = in_be16(laddr);
-+ }
-+ } else {
-+ _insw_ns((u16 __iomem *) addr, dst, count);
-+ }
-+}
-+EXPORT_SYMBOL(ioread16_rep);
-+
-+void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
-+{
-+ _insl_ns((u32 __iomem *) addr, dst, count);
-+}
-+EXPORT_SYMBOL(ioread32_rep);
-+
-+void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ const u8 *buf = src;
-+
-+ for (i = 0; i < count; ++i) {
-+ out_be16(laddr, ((u16) *buf++) << 8);
-+ }
-+ } else {
-+ _outsb((u8 __iomem *) addr, src, count);
-+ }
-+}
-+EXPORT_SYMBOL(iowrite8_rep);
-+
-+void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ const u16 *buf = src;
-+
-+ for (i = 0; i < count; ++i) {
-+ out_be16(laddr, *buf++);
-+ }
-+ } else {
-+ _outsw_ns((u16 __iomem *) addr, src, count);
-+ }
-+}
-+EXPORT_SYMBOL(iowrite16_rep);
-+
-+void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
-+{
-+ _outsl_ns((u32 __iomem *) addr, src, count);
-+}
-+EXPORT_SYMBOL(iowrite32_rep);
-+
-+void __iomem *ioport_map(unsigned long port, unsigned int len)
-+{
-+ return (void __iomem *) (port + _IO_BASE);
-+}
-+EXPORT_SYMBOL(ioport_unmap);
-+
-+void ioport_unmap(void __iomem *addr)
-+{
-+ /* Nothing to do */
-+}
-+EXPORT_SYMBOL(ioport_map);
-+
-+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-+{
-+ /* Nothing to do */
-+}
-+EXPORT_SYMBOL(pci_iounmap);
-+
-+void __iomem *localbus_map(unsigned long addr, unsigned int len)
-+{
-+ if (!localbus_base)
-+ localbus_base = ioremap(addr & ~LOCALBUS_MASK,
-+ LOCALBUS_MASK + 1);
-+ return (void *) (LOCALBUS_START + (addr & LOCALBUS_MASK));
-+}
-+EXPORT_SYMBOL(localbus_map);
-+
-+void localbus_unmap(void __iomem *addr)
-+{
-+}
-+EXPORT_SYMBOL(localbus_unmap);
---- a/arch/powerpc/platforms/83xx/Kconfig
-+++ b/arch/powerpc/platforms/83xx/Kconfig
-@@ -44,6 +44,7 @@ config RB_PPC
- select QUICC_ENGINE
- select PPC_MPC832x
- select PPC_MPC834x
-+ select RB_IOMAP
- help
- This option enables support for MikroTik RouterBOARD 333/600 series boards.
-
+++ /dev/null
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -1019,5 +1019,12 @@ config PATA_LEGACY
-
- If unsure, say N.
-
-+config PATA_RB_PPC
-+ tristate "MikroTik RB600 PATA support"
-+ depends on RB_PPC
-+ help
-+ This option enables support for PATA devices on MikroTik RouterBOARD
-+ 600 series boards.
-+
- endif # ATA_SFF
- endif # ATA
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -99,6 +99,7 @@ obj-$(CONFIG_PATA_PALMLD) += pata_palmld
- obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
- obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
-+obj-$(CONFIG_PATA_RB_PPC) += pata_rbppc_cf.o
- obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
- obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
-
---- /dev/null
-+++ b/drivers/ata/pata_rbppc_cf.c
-@@ -0,0 +1,701 @@
-+/*
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <scsi/scsi_host.h>
-+#include <linux/libata.h>
-+#include <linux/of_platform.h>
-+#include <linux/ata_platform.h>
-+#include <linux/slab.h>
-+#include <linux/of_address.h>
-+#include <linux/of_irq.h>
-+
-+#define DEBUG_UPM 0
-+
-+#define DRV_NAME "pata_rbppc_cf"
-+#define DRV_VERSION "0.0.2"
-+
-+#define DEV2SEL_OFFSET 0x00100000
-+
-+#define IMMR_LBCFG_OFFSET 0x00005000
-+#define IMMR_LBCFG_SIZE 0x00001000
-+
-+#define LOCAL_BUS_MCMR 0x00000078
-+#define MxMR_OP_MASK 0x30000000
-+#define MxMR_OP_NORMAL 0x00000000
-+#define MxMR_OP_WRITE 0x10000000
-+#define MxMR_OP_READ 0x20000000
-+#define MxMR_OP_RUN 0x30000000
-+#define MxMR_LUPWAIT_LOW 0x08000000
-+#define MxMR_LUPWAIT_HIGH 0x00000000
-+#define MxMR_LUPWAIT_ENABLE 0x00040000
-+#define MxMR_RLF_MASK 0x0003c000
-+#define MxMR_RLF_SHIFT 14
-+#define MxMR_WLF_MASK 0x00003c00
-+#define MxMR_WLF_SHIFT 10
-+#define MxMR_MAD_MASK 0x0000003f
-+#define LOCAL_BUS_MDR 0x00000088
-+#define LOCAL_BUS_LCRR 0x000000D4
-+#define LCRR_CLKDIV_MASK 0x0000000f
-+
-+#define LOOP_SIZE 4
-+
-+#define UPM_READ_SINGLE_OFFSET 0x00
-+#define UPM_WRITE_SINGLE_OFFSET 0x18
-+#define UPM_DATA_SIZE 0x40
-+
-+#define LBT_CPUIN_MIN 0
-+#define LBT_CPUOUT_MIN 1
-+#define LBT_CPUOUT_MAX 2
-+#define LBT_EXTDEL_MIN 3
-+#define LBT_EXTDEL_MAX 4
-+#define LBT_SIZE 5
-+
-+/* UPM machine configuration bits */
-+#define N_BASE 0x00f00000
-+#define N_CS 0xf0000000
-+#define N_CS_H1 0xc0000000
-+#define N_CS_H2 0x30000000
-+#define N_WE 0x0f000000
-+#define N_WE_H1 0x0c000000
-+#define N_WE_H2 0x03000000
-+#define N_OE 0x00030000
-+#define N_OE_H1 0x00020000
-+#define N_OE_H2 0x00010000
-+#define WAEN 0x00001000
-+#define REDO_2 0x00000100
-+#define REDO_3 0x00000200
-+#define REDO_4 0x00000300
-+#define LOOP 0x00000080
-+#define NA 0x00000008
-+#define UTA 0x00000004
-+#define LAST 0x00000001
-+
-+#define REDO_VAL(mult) (REDO_2 * ((mult) - 1))
-+#define REDO_MAX_MULT 4
-+
-+#define READ_BASE (N_BASE | N_WE)
-+#define WRITE_BASE (N_BASE | N_OE)
-+#define EMPTY (N_BASE | N_CS | N_OE | N_WE | LAST)
-+
-+#define EOF_UPM_SETTINGS 0
-+#define ANOTHER_TIMING 1
-+
-+#define OA_CPUIN_MIN 0x01
-+#define OA_CPUOUT_MAX 0x02
-+#define OD_CPUOUT_MIN 0x04
-+#define OA_CPUOUT_DELTA 0x06
-+#define OA_EXTDEL_MAX 0x08
-+#define OD_EXTDEL_MIN 0x10
-+#define OA_EXTDEL_DELTA 0x18
-+#define O_MIN_CYCLE_TIME 0x20
-+#define O_MINUS_PREV 0x40
-+#define O_HALF_CYCLE 0x80
-+
-+extern void __iomem *localbus_map(unsigned long addr, unsigned int len);
-+extern void localbus_unmap(void __iomem *addr);
-+
-+struct rbppc_cf_info {
-+ unsigned lbcfg_addr;
-+ unsigned clk_time_ps;
-+ int cur_mode;
-+ u32 lb_timings[LBT_SIZE];
-+};
-+static struct rbppc_cf_info *rbinfo = NULL;
-+
-+struct upm_setting {
-+ unsigned value;
-+ unsigned ns[7];
-+ unsigned clk_minus;
-+ unsigned group_size;
-+ unsigned options;
-+};
-+
-+static const struct upm_setting cfUpmReadSingle[] = {
-+ { READ_BASE | N_OE,
-+ /* t1 - ADDR setup time */
-+ { 70, 50, 30, 30, 25, 15, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { READ_BASE | N_OE_H1,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { READ_BASE,
-+ /* t2 - OE0 time */
-+ { 290, 290, 290, 80, 70, 65, 55 }, 0, 2, (OA_CPUOUT_MAX |
-+ OA_CPUIN_MIN) },
-+ { READ_BASE | WAEN,
-+ { 1, 1, 1, 1, 1, 0, 0 }, 0, 0, 0 },
-+ { READ_BASE | UTA,
-+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
-+ { READ_BASE | N_OE,
-+ /* t9 - ADDR hold time */
-+ { 20, 15, 10, 10, 10, 10, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OD_EXTDEL_MIN) },
-+ { READ_BASE | N_OE | N_CS_H2,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { READ_BASE | N_OE | N_CS,
-+ /* t6Z -IORD data tristate */
-+ { 30, 30, 30, 30, 30, 20, 20 }, 1, 1, O_MINUS_PREV },
-+ { ANOTHER_TIMING,
-+ /* t2i -IORD recovery time */
-+ { 0, 0, 0, 70, 25, 25, 20 }, 2, 0, 0 },
-+ { ANOTHER_TIMING,
-+ /* CS 0 -> 1 MAX */
-+ { 0, 0, 0, 0, 0, 0, 0 }, 1, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { READ_BASE | N_OE | N_CS | LAST,
-+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
-+ { EOF_UPM_SETTINGS,
-+ /* min total cycle time - includes turnaround and ALE cycle */
-+ { 600, 383, 240, 180, 120, 100, 80 }, 2, 0, O_MIN_CYCLE_TIME },
-+};
-+
-+static const struct upm_setting cfUpmWriteSingle[] = {
-+ { WRITE_BASE | N_WE,
-+ /* t1 - ADDR setup time */
-+ { 70, 50, 30, 30, 25, 15, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { WRITE_BASE | N_WE_H1,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { WRITE_BASE,
-+ /* t2 - WE0 time */
-+ { 290, 290, 290, 80, 70, 65, 55 }, 0, 1, OA_CPUOUT_DELTA },
-+ { WRITE_BASE | WAEN,
-+ { 1, 1, 1, 1, 1, 0, 0 }, 0, 0, 0 },
-+ { WRITE_BASE | N_WE,
-+ /* t9 - ADDR hold time */
-+ { 20, 15, 10, 10, 10, 10, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OD_EXTDEL_MIN) },
-+ { WRITE_BASE | N_WE | N_CS_H2,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { WRITE_BASE | N_WE | N_CS,
-+ /* t4 - DATA hold time */
-+ { 30, 20, 15, 10, 10, 10, 10 }, 0, 1, O_MINUS_PREV },
-+ { ANOTHER_TIMING,
-+ /* t2i -IOWR recovery time */
-+ { 0, 0, 0, 70, 25, 25, 20 }, 1, 0, 0 },
-+ { ANOTHER_TIMING,
-+ /* CS 0 -> 1 MAX */
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { WRITE_BASE | N_WE | N_CS | UTA | LAST,
-+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
-+ /* min total cycle time - includes ALE cycle */
-+ { EOF_UPM_SETTINGS,
-+ { 600, 383, 240, 180, 120, 100, 80 }, 1, 0, O_MIN_CYCLE_TIME },
-+};
-+
-+static u8 rbppc_cf_check_status(struct ata_port *ap) {
-+ u8 val = ioread8(ap->ioaddr.status_addr);
-+ if (val == 0xF9)
-+ val = 0x7F;
-+ return val;
-+}
-+
-+static u8 rbppc_cf_check_altstatus(struct ata_port *ap) {
-+ u8 val = ioread8(ap->ioaddr.altstatus_addr);
-+ if (val == 0xF9)
-+ val = 0x7F;
-+ return val;
-+}
-+
-+static void rbppc_cf_dummy_noret(struct ata_port *ap) { }
-+static int rbppc_cf_dummy_ret0(struct ata_port *ap) { return 0; }
-+
-+static int ps2clk(int ps, unsigned clk_time_ps) {
-+ int psMaxOver;
-+ if (ps <= 0) return 0;
-+
-+ /* round down if <= 2% over clk border, but no more than 1/4 clk cycle */
-+ psMaxOver = ps * 2 / 100;
-+ if (4 * psMaxOver > clk_time_ps) {
-+ psMaxOver = clk_time_ps / 4;
-+ }
-+ return (ps + clk_time_ps - 1 - psMaxOver) / clk_time_ps;
-+}
-+
-+static int upm_gen_ps_table(const struct upm_setting *upm,
-+ int mode, struct rbppc_cf_info *info,
-+ int *psFinal) {
-+ int uidx;
-+ int lastUpmValIdx = 0;
-+ int group_start_idx = -1;
-+ int group_left_num = -1;
-+ int clk_time_ps = info->clk_time_ps;
-+
-+ for (uidx = 0; upm[uidx].value != EOF_UPM_SETTINGS; ++uidx) {
-+ const struct upm_setting *us = upm + uidx;
-+ unsigned opt = us->options;
-+ int ps = us->ns[mode] * 1000 - us->clk_minus * clk_time_ps;
-+
-+ if (opt & OA_CPUIN_MIN) ps += info->lb_timings[LBT_CPUIN_MIN];
-+ if (opt & OD_CPUOUT_MIN) ps -= info->lb_timings[LBT_CPUOUT_MIN];
-+ if (opt & OA_CPUOUT_MAX) ps += info->lb_timings[LBT_CPUOUT_MAX];
-+ if (opt & OD_EXTDEL_MIN) ps -= info->lb_timings[LBT_EXTDEL_MIN];
-+ if (opt & OA_EXTDEL_MAX) ps += info->lb_timings[LBT_EXTDEL_MAX];
-+
-+ if (us->value == ANOTHER_TIMING) {
-+ /* use longest timing from alternatives */
-+ if (psFinal[lastUpmValIdx] < ps) {
-+ psFinal[lastUpmValIdx] = ps;
-+ }
-+ ps = 0;
-+ }
-+ else {
-+ if (us->group_size) {
-+ group_start_idx = uidx;
-+ group_left_num = us->group_size;
-+ }
-+ else if (group_left_num > 0) {
-+ /* group time is divided on all group members */
-+ int clk = ps2clk(ps, clk_time_ps);
-+ psFinal[group_start_idx] -= clk * clk_time_ps;
-+ --group_left_num;
-+ }
-+ if ((opt & O_MINUS_PREV) && lastUpmValIdx > 0) {
-+ int clk = ps2clk(psFinal[lastUpmValIdx],
-+ clk_time_ps);
-+ ps -= clk * clk_time_ps;
-+ }
-+ lastUpmValIdx = uidx;
-+ }
-+ psFinal[uidx] = ps;
-+ }
-+ return uidx;
-+}
-+
-+static int free_half(int ps, int clk, int clk_time_ps) {
-+ if (clk < 2) return 0;
-+ return (clk * clk_time_ps - ps) * 2 >= clk_time_ps;
-+}
-+
-+static void upm_gen_clk_table(const struct upm_setting *upm,
-+ int mode, int clk_time_ps,
-+ int max_uidx, const int *psFinal, int *clkFinal) {
-+ int clk_cycle_time;
-+ int clk_total;
-+ int uidx;
-+
-+ /* convert picoseconds to clocks */
-+ clk_total = 0;
-+ for (uidx = 0; uidx < max_uidx; ++uidx) {
-+ int clk = ps2clk(psFinal[uidx], clk_time_ps);
-+ clkFinal[uidx] = clk;
-+ clk_total += clk;
-+ }
-+
-+ /* check possibility of half cycle usage */
-+ for (uidx = 1; uidx < max_uidx - 1; ++uidx) {
-+ if ((upm[uidx].options & O_HALF_CYCLE) &&
-+ free_half(psFinal[uidx - 1], clkFinal[uidx - 1],
-+ clk_time_ps) &&
-+ free_half(psFinal[uidx + 1], clkFinal[uidx + 1],
-+ clk_time_ps)) {
-+ ++clkFinal[uidx];
-+ --clkFinal[uidx - 1];
-+ --clkFinal[uidx + 1];
-+ }
-+ }
-+
-+ if ((upm[max_uidx].options & O_MIN_CYCLE_TIME) == 0) return;
-+
-+ /* check cycle time, adjust timings if needed */
-+ clk_cycle_time = (ps2clk(upm[max_uidx].ns[mode] * 1000, clk_time_ps) -
-+ upm[max_uidx].clk_minus);
-+ uidx = 0;
-+ while (clk_total < clk_cycle_time) {
-+ /* extend all timings in round-robin to match cycle time */
-+ if (clkFinal[uidx]) {
-+#if DEBUG_UPM
-+ printk(KERN_INFO "extending %u by 1 clk\n", uidx);
-+#endif
-+ ++clkFinal[uidx];
-+ ++clk_total;
-+ }
-+ ++uidx;
-+ if (uidx == max_uidx) uidx = 0;
-+ }
-+}
-+
-+static void add_data_val(unsigned val, int *clkLeft, int maxClk,
-+ unsigned *data, int *dataIdx) {
-+ if (*clkLeft == 0) return;
-+
-+ if (maxClk == 0 && *clkLeft >= LOOP_SIZE * 2) {
-+ int times;
-+ int times1;
-+ int times2;
-+
-+ times = *clkLeft / LOOP_SIZE;
-+ if (times > REDO_MAX_MULT * 2) times = REDO_MAX_MULT * 2;
-+ times1 = times / 2;
-+ times2 = times - times1;
-+
-+ val |= LOOP;
-+ data[*dataIdx] = val | REDO_VAL(times1);
-+ ++(*dataIdx);
-+ data[*dataIdx] = val | REDO_VAL(times2);
-+ ++(*dataIdx);
-+
-+ *clkLeft -= times * LOOP_SIZE;
-+ return;
-+ }
-+
-+ if (maxClk < 1 || maxClk > REDO_MAX_MULT) maxClk = REDO_MAX_MULT;
-+ if (*clkLeft < maxClk) maxClk = *clkLeft;
-+
-+ *clkLeft -= maxClk;
-+ val |= REDO_VAL(maxClk);
-+
-+ data[*dataIdx] = val;
-+ ++(*dataIdx);
-+}
-+
-+static int upm_gen_final_data(const struct upm_setting *upm,
-+ int max_uidx, int *clkFinal, unsigned *data) {
-+ int dataIdx;
-+ int uidx;
-+
-+ dataIdx = 0;
-+ for (uidx = 0; uidx < max_uidx; ++uidx) {
-+ int clk = clkFinal[uidx];
-+ while (clk > 0) {
-+ add_data_val(upm[uidx].value, &clk, 0,
-+ data, &dataIdx);
-+ }
-+ }
-+ return dataIdx;
-+}
-+
-+static int conv_upm_table(const struct upm_setting *upm,
-+ int mode, struct rbppc_cf_info *info,
-+ unsigned *data) {
-+#if DEBUG_UPM
-+ int uidx;
-+#endif
-+ int psFinal[32];
-+ int clkFinal[32];
-+ int max_uidx;
-+ int data_len;
-+
-+ max_uidx = upm_gen_ps_table(upm, mode, info, psFinal);
-+
-+ upm_gen_clk_table(upm, mode, info->clk_time_ps, max_uidx,
-+ psFinal, clkFinal);
-+
-+#if DEBUG_UPM
-+ /* dump out debug info */
-+ for (uidx = 0; uidx < max_uidx; ++uidx) {
-+ if (clkFinal[uidx]) {
-+ printk(KERN_INFO "idx %d val %08x clk %d ps %d\n",
-+ uidx, upm[uidx].value,
-+ clkFinal[uidx], psFinal[uidx]);
-+ }
-+ }
-+#endif
-+
-+ data_len = upm_gen_final_data(upm, max_uidx, clkFinal, data);
-+
-+#if DEBUG_UPM
-+ for (uidx = 0; uidx < data_len; ++uidx) {
-+ printk(KERN_INFO "cf UPM x result: idx %d val %08x\n",
-+ uidx, data[uidx]);
-+ }
-+#endif
-+ return 0;
-+}
-+
-+static int gen_upm_data(int mode, struct rbppc_cf_info *info, unsigned *data) {
-+ int i;
-+
-+ for (i = 0; i < UPM_DATA_SIZE; ++i) {
-+ data[i] = EMPTY;
-+ }
-+
-+ if (conv_upm_table(cfUpmReadSingle, mode, info, data + UPM_READ_SINGLE_OFFSET)) {
-+ return -1;
-+ }
-+ if (conv_upm_table(cfUpmWriteSingle, mode, info, data + UPM_WRITE_SINGLE_OFFSET)) {
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+static void rbppc_cf_program_upm(void *upmMemAddr, volatile void *lbcfg_mxmr, volatile void *lbcfg_mdr, const unsigned *upmData, unsigned offset, unsigned len) {
-+ unsigned i;
-+ unsigned mxmr;
-+
-+ mxmr = in_be32(lbcfg_mxmr);
-+ mxmr &= ~(MxMR_OP_MASK | MxMR_MAD_MASK);
-+ mxmr |= (MxMR_OP_WRITE | offset);
-+ out_be32(lbcfg_mxmr, mxmr);
-+ in_be32(lbcfg_mxmr); /* flush MxMR write */
-+
-+ for (i = 0; i < len; ++i) {
-+ int to;
-+ unsigned data = upmData[i + offset];
-+ out_be32(lbcfg_mdr, data);
-+ in_be32(lbcfg_mdr); /* flush MDR write */
-+
-+ iowrite8(1, upmMemAddr); /* dummy write to any CF addr */
-+
-+ /* wait for dummy write to complete */
-+ for (to = 10000; to >= 0; --to) {
-+ mxmr = in_be32(lbcfg_mxmr);
-+ if (((mxmr ^ (i + 1)) & MxMR_MAD_MASK) == 0) {
-+ break;
-+ }
-+ if (to == 0) {
-+ printk(KERN_ERR "rbppc_cf_program_upm: UPMx program error at 0x%x: Timeout\n", i);
-+ }
-+ }
-+ }
-+ mxmr &= ~(MxMR_OP_MASK | MxMR_RLF_MASK | MxMR_WLF_MASK);
-+ mxmr |= (MxMR_OP_NORMAL | (LOOP_SIZE << MxMR_RLF_SHIFT) | (LOOP_SIZE << MxMR_WLF_SHIFT));
-+ out_be32(lbcfg_mxmr, mxmr);
-+}
-+
-+static int rbppc_cf_update_piomode(struct ata_port *ap, int mode) {
-+ struct rbppc_cf_info *info = (struct rbppc_cf_info *)ap->host->private_data;
-+ void *lbcfgBase;
-+ unsigned upmData[UPM_DATA_SIZE];
-+
-+ if (gen_upm_data(mode, info, upmData)) {
-+ return -1;
-+ }
-+
-+ lbcfgBase = ioremap_nocache(info->lbcfg_addr, IMMR_LBCFG_SIZE);
-+
-+ rbppc_cf_program_upm(ap->ioaddr.cmd_addr, ((char *)lbcfgBase) + LOCAL_BUS_MCMR, ((char *)lbcfgBase) + LOCAL_BUS_MDR, upmData, 0, UPM_DATA_SIZE);
-+ iounmap(lbcfgBase);
-+ return 0;
-+}
-+
-+static void rbppc_cf_set_piomode(struct ata_port *ap, struct ata_device *adev)
-+{
-+ struct rbppc_cf_info *info = (struct rbppc_cf_info *)ap->host->private_data;
-+ int mode = adev->pio_mode - XFER_PIO_0;
-+
-+ DPRINTK("rbppc_cf_set_piomode: PIO %d\n", mode);
-+ if (mode < 0) mode = 0;
-+ if (mode > 6) mode = 6;
-+
-+ if (info->cur_mode < 0 || info->cur_mode > mode) {
-+ if (rbppc_cf_update_piomode(ap, mode) == 0) {
-+ printk(KERN_INFO "rbppc_cf_set_piomode: PIO mode changed to %d\n", mode);
-+ info->cur_mode = mode;
-+ }
-+ }
-+}
-+
-+static struct scsi_host_template rbppc_cf_sht = {
-+ ATA_BASE_SHT(DRV_NAME),
-+};
-+
-+static struct ata_port_operations rbppc_cf_port_ops = {
-+ .inherits = &ata_bmdma_port_ops,
-+
-+ .sff_check_status = rbppc_cf_check_status,
-+ .sff_check_altstatus = rbppc_cf_check_altstatus,
-+
-+ .set_piomode = rbppc_cf_set_piomode,
-+
-+ .port_start = rbppc_cf_dummy_ret0,
-+
-+ .sff_irq_clear = rbppc_cf_dummy_noret,
-+};
-+
-+static int rbppc_cf_init_info(struct platform_device *pdev, struct rbppc_cf_info *info) {
-+ struct device_node *np;
-+ struct resource res;
-+ const u32 *u32ptr;
-+ void *lbcfgBase;
-+ void *lbcfg_lcrr;
-+ unsigned lbc_clk_khz;
-+ unsigned lbc_extra_divider = 1;
-+ unsigned ccb_freq_hz;
-+ unsigned lb_div;
-+
-+ u32ptr = of_get_property(pdev->dev.of_node, "lbc_extra_divider", NULL);
-+ if (u32ptr && *u32ptr) {
-+ lbc_extra_divider = *u32ptr;
-+#if DEBUG_UPM
-+ printk(KERN_INFO "rbppc_cf_init_info: LBC extra divider %u\n",
-+ lbc_extra_divider);
-+#endif
-+ }
-+
-+ np = of_find_node_by_type(NULL, "serial");
-+ if (!np) {
-+ printk(KERN_ERR "rbppc_cf_init_info: No serial node found\n");
-+ return -1;
-+ }
-+ u32ptr = of_get_property(np, "clock-frequency", NULL);
-+ if (u32ptr == 0 || *u32ptr == 0) {
-+ printk(KERN_ERR "rbppc_cf_init_info: Serial does not have clock-frequency\n");
-+ of_node_put(np);
-+ return -1;
-+ }
-+ ccb_freq_hz = *u32ptr;
-+ of_node_put(np);
-+
-+ np = of_find_node_by_type(NULL, "soc");
-+ if (!np) {
-+ printk(KERN_ERR "rbppc_cf_init_info: No soc node found\n");
-+ return -1;
-+ }
-+ if (of_address_to_resource(np, 0, &res)) {
-+ printk(KERN_ERR "rbppc_cf_init_info: soc does not have resource\n");
-+ of_node_put(np);
-+ return -1;
-+ }
-+ info->lbcfg_addr = res.start + IMMR_LBCFG_OFFSET;
-+ of_node_put(np);
-+
-+ lbcfgBase = ioremap_nocache(info->lbcfg_addr, IMMR_LBCFG_SIZE);
-+ lbcfg_lcrr = ((char*)lbcfgBase) + LOCAL_BUS_LCRR;
-+ lb_div = (in_be32(lbcfg_lcrr) & LCRR_CLKDIV_MASK) * lbc_extra_divider;
-+ iounmap(lbcfgBase);
-+
-+ lbc_clk_khz = ccb_freq_hz / (1000 * lb_div);
-+ info->clk_time_ps = 1000000000 / lbc_clk_khz;
-+ printk(KERN_INFO "rbppc_cf_init_info: Using Local-Bus clock %u kHz %u ps\n",
-+ lbc_clk_khz, info->clk_time_ps);
-+
-+ u32ptr = of_get_property(pdev->dev.of_node, "lb-timings", NULL);
-+ if (u32ptr) {
-+ memcpy(info->lb_timings, u32ptr, LBT_SIZE * sizeof(*u32ptr));
-+#if DEBUG_UPM
-+ printk(KERN_INFO "rbppc_cf_init_info: Got LB timings <%u %u %u %u %u>\n",
-+ u32ptr[0], u32ptr[1], u32ptr[2], u32ptr[3], u32ptr[4]);
-+#endif
-+ }
-+ info->cur_mode = -1;
-+ return 0;
-+}
-+
-+static int rbppc_cf_probe(struct platform_device *pdev)
-+{
-+ struct ata_host *host;
-+ struct ata_port *ap;
-+ struct rbppc_cf_info *info = NULL;
-+ struct resource res;
-+ void *baddr;
-+ const u32 *u32ptr;
-+ int irq_level = 0;
-+ int err = -ENOMEM;
-+
-+ printk(KERN_INFO "rbppc_cf_probe: MikroTik RouterBOARD 600 series Compact Flash PATA driver, version " DRV_VERSION "\n");
-+
-+ if (rbinfo == NULL) {
-+ info = kmalloc(sizeof(*info), GFP_KERNEL);
-+ if (info == NULL) {
-+ printk(KERN_ERR "rbppc_cf_probe: Out of memory\n");
-+ goto err_info;
-+ }
-+ memset(info, 0, sizeof(*info));
-+
-+ if (rbppc_cf_init_info(pdev, info)) {
-+ goto err_info;
-+ }
-+ rbinfo = info;
-+ }
-+
-+ u32ptr = of_get_property(pdev->dev.of_node, "interrupt-at-level", NULL);
-+ if (u32ptr) {
-+ irq_level = *u32ptr;
-+ printk(KERN_INFO "rbppc_cf_probe: IRQ level %u\n", irq_level);
-+ }
-+
-+ if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
-+ printk(KERN_ERR "rbppc_cf_probe: No reg property found\n");
-+ goto err_info;
-+ }
-+
-+ host = ata_host_alloc(&pdev->dev, 1);
-+ if (!host)
-+ goto err_info;
-+
-+ baddr = localbus_map(res.start, res.end - res.start + 1);
-+ host->iomap = baddr;
-+ host->private_data = rbinfo;
-+
-+ ap = host->ports[0];
-+ ap->ops = &rbppc_cf_port_ops;
-+ ap->pio_mask = 0x7F; /* PIO modes 0-6 */
-+ ap->mwdma_mask = 0;
-+
-+ ap->ioaddr.cmd_addr = baddr;
-+ ata_sff_std_ports(&ap->ioaddr);
-+ ap->ioaddr.ctl_addr = ap->ioaddr.cmd_addr + 14;
-+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
-+ ap->ioaddr.bmdma_addr = 0;
-+
-+ err = ata_host_activate(
-+ host,
-+ irq_of_parse_and_map(pdev->dev.of_node, 0), ata_sff_interrupt,
-+ irq_level ? IRQF_TRIGGER_HIGH : IRQF_TRIGGER_LOW,
-+ &rbppc_cf_sht);
-+ if (!err) return 0;
-+
-+ localbus_unmap(baddr);
-+err_info:
-+ if (info) {
-+ kfree(info);
-+ rbinfo = NULL;
-+ }
-+ return err;
-+}
-+
-+static int rbppc_cf_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct ata_host *host = dev_get_drvdata(dev);
-+
-+ if (host == NULL) return -1;
-+
-+ ata_host_detach(host);
-+ return 0;
-+}
-+
-+static struct of_device_id rbppc_cf_ids[] = {
-+ { .name = "cf", },
-+ { },
-+};
-+
-+static struct platform_driver rbppc_cf_driver = {
-+ .probe = rbppc_cf_probe,
-+ .remove = rbppc_cf_remove,
-+ .driver = {
-+ .name = "rbppc-cf",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rbppc_cf_ids,
-+ },
-+};
-+
-+static int __init rbppc_init(void)
-+{
-+ return platform_driver_register(&rbppc_cf_driver);
-+}
-+
-+static void __exit rbppc_exit(void)
-+{
-+ platform_driver_unregister(&rbppc_cf_driver);
-+}
-+
-+MODULE_AUTHOR("Mikrotikls SIA");
-+MODULE_AUTHOR("Noah Fontes");
-+MODULE_DESCRIPTION("MikroTik RouterBOARD 600 series Compact Flash PATA driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(rbppc_init);
-+module_exit(rbppc_exit);
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -408,6 +408,13 @@ config MTD_NAND_PLATFORM
- devices. You will need to provide platform-specific functions
- via platform_data.
-
-+config MTD_NAND_RB_PPC
-+ tristate "MikroTik RB333/600 NAND support"
-+ depends on RB_PPC
-+ help
-+ This option enables support for the NAND device on MikroTik
-+ RouterBOARD 333/600 series boards.
-+
- config MTD_NAND_ORION
- tristate "NAND Flash support for Marvell Orion SoC"
- depends on PLAT_ORION
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB_PPC) += rbppc_nand.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
- obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
---- /dev/null
-+++ b/drivers/mtd/nand/rbppc_nand.c
-@@ -0,0 +1,251 @@
-+/*
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_device.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/of_address.h>
-+#include <asm/io.h>
-+
-+#define DRV_NAME "rbppc_nand"
-+#define DRV_VERSION "0.0.2"
-+
-+static struct mtd_info rmtd;
-+static struct nand_chip rnand;
-+
-+struct rbppc_nand_info {
-+ void *gpi;
-+ void *gpo;
-+ void *localbus;
-+
-+ unsigned gpio_rdy;
-+ unsigned gpio_nce;
-+ unsigned gpio_cle;
-+ unsigned gpio_ale;
-+ unsigned gpio_ctrls;
-+};
-+
-+/* We must use the OOB layout from yaffs 1 if we want this to be recognized
-+ * properly. Borrowed from the OpenWRT patches for the RB532.
-+ *
-+ * See <https://dev.openwrt.org/browser/trunk/target/linux/rb532/
-+ * patches-2.6.28/025-rb532_nand_fixup.patch> for more details.
-+ */
-+static struct nand_ecclayout rbppc_nand_oob_16 = {
-+ .eccbytes = 6,
-+ .eccpos = { 8, 9, 10, 13, 14, 15 },
-+ .oobavail = 9,
-+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-+};
-+
-+static struct mtd_partition rbppc_nand_partition_info[] = {
-+ {
-+ name: "kernel",
-+ offset: 0,
-+ size: 4 * 1024 * 1024,
-+ },
-+ {
-+ name: "rootfs",
-+ offset: MTDPART_OFS_NXTBLK,
-+ size: MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static int rbppc_nand_dev_ready(struct mtd_info *mtd) {
-+ struct nand_chip *chip = mtd->priv;
-+ struct rbppc_nand_info *priv = chip->priv;
-+
-+ return in_be32(priv->gpi) & priv->gpio_rdy;
-+}
-+
-+static void rbppc_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) {
-+ struct nand_chip *chip = mtd->priv;
-+ struct rbppc_nand_info *priv = chip->priv;
-+
-+ if (ctrl & NAND_CTRL_CHANGE) {
-+ unsigned val = in_be32(priv->gpo);
-+ if (!(val & priv->gpio_nce)) {
-+ /* make sure Local Bus has done NAND operations */
-+ readb(priv->localbus);
-+ }
-+
-+ if (ctrl & NAND_CLE) {
-+ val |= priv->gpio_cle;
-+ } else {
-+ val &= ~priv->gpio_cle;
-+ }
-+ if (ctrl & NAND_ALE) {
-+ val |= priv->gpio_ale;
-+ } else {
-+ val &= ~priv->gpio_ale;
-+ }
-+ if (!(ctrl & NAND_NCE)) {
-+ val |= priv->gpio_nce;
-+ } else {
-+ val &= ~priv->gpio_nce;
-+ }
-+ out_be32(priv->gpo, val);
-+
-+ /* make sure GPIO output has changed */
-+ val ^= in_be32(priv->gpo);
-+ if (val & priv->gpio_ctrls) {
-+ printk(KERN_ERR "rbppc_nand_hwcontrol: NAND GPO change failed 0x%08x\n", val);
-+ }
-+ }
-+
-+ if (cmd != NAND_CMD_NONE) writeb(cmd, chip->IO_ADDR_W);
-+}
-+
-+static void rbppc_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ memcpy(buf, chip->IO_ADDR_R, len);
-+}
-+
-+static unsigned init_ok = 0;
-+
-+static int rbppc_nand_probe(struct platform_device *pdev)
-+{
-+ struct device_node *gpio;
-+ struct device_node *nnand;
-+ struct resource res;
-+ struct rbppc_nand_info *info;
-+ void *baddr;
-+ const unsigned *rdy, *nce, *cle, *ale;
-+
-+ printk(KERN_INFO "rbppc_nand_probe: MikroTik RouterBOARD 333/600 series NAND driver, version " DRV_VERSION "\n");
-+
-+ info = kmalloc(sizeof(*info), GFP_KERNEL);
-+
-+ rdy = of_get_property(pdev->dev.of_node, "rdy", NULL);
-+ nce = of_get_property(pdev->dev.of_node, "nce", NULL);
-+ cle = of_get_property(pdev->dev.of_node, "cle", NULL);
-+ ale = of_get_property(pdev->dev.of_node, "ale", NULL);
-+
-+ if (!rdy || !nce || !cle || !ale) {
-+ printk(KERN_ERR "rbppc_nand_probe: GPIO properties are missing\n");
-+ goto err;
-+ }
-+ if (rdy[0] != nce[0] || rdy[0] != cle[0] || rdy[0] != ale[0]) {
-+ printk(KERN_ERR "rbppc_nand_probe: Different GPIOs are not supported\n");
-+ goto err;
-+ }
-+
-+ gpio = of_find_node_by_phandle(rdy[0]);
-+ if (!gpio) {
-+ printk(KERN_ERR "rbppc_nand_probe: No GPIO<%x> node found\n", *rdy);
-+ goto err;
-+ }
-+ if (of_address_to_resource(gpio, 0, &res)) {
-+ printk(KERN_ERR "rbppc_nand_probe: No reg property in GPIO found\n");
-+ goto err;
-+ }
-+ info->gpo = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ if (!of_address_to_resource(gpio, 1, &res)) {
-+ info->gpi = ioremap_nocache(res.start, res.end - res.start + 1);
-+ } else {
-+ info->gpi = info->gpo;
-+ }
-+ of_node_put(gpio);
-+
-+ info->gpio_rdy = 1 << (31 - rdy[1]);
-+ info->gpio_nce = 1 << (31 - nce[1]);
-+ info->gpio_cle = 1 << (31 - cle[1]);
-+ info->gpio_ale = 1 << (31 - ale[1]);
-+ info->gpio_ctrls = info->gpio_nce | info->gpio_cle | info->gpio_ale;
-+
-+ nnand = of_find_node_by_name(NULL, "nnand");
-+ if (!nnand) {
-+ printk("rbppc_nand_probe: No nNAND found\n");
-+ goto err;
-+ }
-+ if (of_address_to_resource(nnand, 0, &res)) {
-+ printk("rbppc_nand_probe: No reg property in nNAND found\n");
-+ goto err;
-+ }
-+ of_node_put(nnand);
-+ info->localbus = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
-+ printk("rbppc_nand_probe: No reg property found\n");
-+ goto err;
-+ }
-+ baddr = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ memset(&rnand, 0, sizeof(rnand));
-+ rnand.cmd_ctrl = rbppc_nand_cmd_ctrl;
-+ rnand.dev_ready = rbppc_nand_dev_ready;
-+ rnand.read_buf = rbppc_nand_read_buf;
-+ rnand.IO_ADDR_W = baddr;
-+ rnand.IO_ADDR_R = baddr;
-+ rnand.priv = info;
-+
-+ memset(&rmtd, 0, sizeof(rmtd));
-+ rnand.ecc.mode = NAND_ECC_SOFT;
-+ rnand.ecc.layout = &rbppc_nand_oob_16;
-+ rnand.chip_delay = 25;
-+ rmtd.priv = &rnand;
-+ rmtd.owner = THIS_MODULE;
-+
-+ if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
-+ printk(KERN_ERR "rbppc_nand_probe: RouterBOARD NAND device not found\n");
-+ return -ENXIO;
-+ }
-+
-+ mtd_device_parse_register(&rmtd, NULL, 0, rbppc_nand_partition_info, 2);
-+ init_ok = 1;
-+ return 0;
-+
-+err:
-+ kfree(info);
-+ return -1;
-+}
-+
-+static struct of_device_id rbppc_nand_ids[] = {
-+ { .name = "nand", },
-+ { },
-+};
-+
-+static struct platform_driver rbppc_nand_driver = {
-+ .probe = rbppc_nand_probe,
-+ .driver = {
-+ .name = "rbppc-nand",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rbppc_nand_ids,
-+ },
-+};
-+
-+static int __init rbppc_nand_init(void)
-+{
-+ return platform_driver_register(&rbppc_nand_driver);
-+}
-+
-+static void __exit rbppc_nand_exit(void)
-+{
-+ platform_driver_unregister(&rbppc_nand_driver);
-+}
-+
-+MODULE_AUTHOR("Mikrotikls SIA");
-+MODULE_AUTHOR("Noah Fontes");
-+MODULE_AUTHOR("Michael Guntsche");
-+MODULE_DESCRIPTION("MikroTik RouterBOARD 333/600 series NAND driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(rbppc_nand_init);
-+module_exit(rbppc_nand_exit);
+++ /dev/null
---- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
-+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
-@@ -81,6 +81,11 @@
- reg = <0x3a0000 0x3c60000>;
- label = "rootfs";
- };
-+
-+ partition1@a0000 {
-+ reg = <0xa0000 0x3f60000>;
-+ label = "firmware";
-+ };
- };
- };
-
-@@ -474,4 +479,8 @@
- default-state = "off";
- };
- };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 rootfstype=squashfs noinitrd";
-+ };
- };
+++ /dev/null
---- a/arch/powerpc/Makefile
-+++ b/arch/powerpc/Makefile
-@@ -155,7 +155,9 @@ all: zImage
-
- # With make 3.82 we cannot mix normal and wildcard targets
- BOOT_TARGETS1 := zImage zImage.initrd uImage
--BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.%
-+BOOT_TARGETS2 := uImage.fit.% zImage% dtbImage% treeImage.% cuImage.% \
-+ simpleImage.% uImage.%
-+
-
- PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
-
-@@ -188,6 +190,7 @@ define archhelp
- @echo '* zImage - Build default images selected by kernel config'
- @echo ' zImage.* - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
- @echo ' uImage - U-Boot native image format'
-+ @echo ' uImage.fit.<dt> - U-Boot Flattened Image Tree image format'
- @echo ' cuImage.<dt> - Backwards compatible U-Boot image for older'
- @echo ' versions which do not support device trees'
- @echo ' dtbImage.<dt> - zImage with an embedded device tree blob'
---- a/arch/powerpc/boot/.gitignore
-+++ b/arch/powerpc/boot/.gitignore
-@@ -14,6 +14,7 @@ kernel-vmlinux.strip.c
- kernel-vmlinux.strip.gz
- mktree
- uImage
-+uImage.fit.*
- cuImage.*
- dtbImage.*
- treeImage.*
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -338,6 +338,9 @@ $(obj)/uImage.initrd.%: vmlinux $(obj)/%
- $(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
- $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
-
-+$(obj)/uImage.fit.%: vmlinux $(obj)/%.dtb $(wrapperbits)
-+ $(call if_changed,wrap,uboot.fit,,$(obj)/$*.dtb)
-+
- $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
- $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
-
-@@ -375,6 +378,7 @@ install: $(CONFIGURE) $(addprefix $(obj)
-
- # anything not in $(targets)
- clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
-+ uImage.* \
- zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
- zImage.miboot zImage.pmac zImage.pseries \
- zImage.maple simpleImage.* otheros.bld *.dtb
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -47,6 +47,9 @@ CROSS=
- # mkimage wrapper script
- MKIMAGE=$srctree/scripts/mkuboot.sh
-
-+# script to generate an .its file for uImage.fit.* images
-+MKITS=$srctree/scripts/mkits.sh
-+
- # directory for object and other files used by this script
- object=arch/powerpc/boot
- objbin=$object
-@@ -336,6 +339,21 @@ uboot-obs600)
- if [ -z "$cacheit" ]; then
- rm -f "$vmz"
- fi
-+ exit 0
-+ ;;
-+uboot.fit)
-+ rm -f "$ofile"
-+ ${MKITS} -A ppc -C gzip -a $membase -e $membase -v $version \
-+ -d "$srctree/$dtb" -k "$srctree/$vmz" -o "$object/uImage.its"
-+
-+ # mkimage calls dtc for FIT images so use kernel dtc if necessary
-+ export PATH=$PATH:$srctree/scripts/dtc
-+
-+ ${MKIMAGE} -f "$object/uImage.its" "$ofile"
-+ rm "$object/uImage.its"
-+ if [ -z "$cacheit" ]; then
-+ rm -f "$vmz"
-+ fi
- exit 0
- ;;
- esac
+++ /dev/null
---- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
-+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
-@@ -462,4 +462,18 @@
- 0 0x00800000>;
- };
- };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ diag {
-+ gpios = <&gpio1 9 1>;
-+ default-state = "off";
-+ };
-+
-+ wireless {
-+ gpios = <&gpio1 10 1>;
-+ default-state = "off";
-+ };
-+ };
- };
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -69,6 +69,12 @@ config VITESSE_PHY
- ---help---
- Currently supports the vsc8244
-
-+config VITESSE_PHY_8601_SKEW
-+ bool "Enable skew timing to vsc8601"
-+ depends on VITESSE_PHY
-+ ---help---
-+ Apply clock timing adjustments for vsc8601
-+
- config SMSC_PHY
- tristate "Drivers for SMSC PHYs"
- ---help---
---- a/drivers/net/phy/vitesse.c
-+++ b/drivers/net/phy/vitesse.c
-@@ -26,6 +26,11 @@
- #define MII_VSC8244_EXTCON1_TX_SKEW 0x0800
- #define MII_VSC8244_EXTCON1_RX_SKEW 0x0200
-
-+/* EXT_CON1 Register values for VSC8601 */
-+#define MII_VSC8601_EXTCON1_INIT 0x0000
-+#define MII_VSC8601_EXTCON1_SKEW 0x0100
-+#define MII_VSC8601_EXTCON1_ACTIPHY 0x0020
-+
- /* Vitesse Interrupt Mask Register */
- #define MII_VSC8244_IMASK 0x19
- #define MII_VSC8244_IMASK_IEN 0x8000
-@@ -56,6 +61,7 @@
-
- #define PHY_ID_VSC8244 0x000fc6c0
- #define PHY_ID_VSC8221 0x000fc550
-+#define PHY_ID_VSC8601 0x00070420
-
- MODULE_DESCRIPTION("Vitesse PHY driver");
- MODULE_AUTHOR("Kriston Carson");
-@@ -98,10 +104,34 @@ static int vsc824x_config_init(struct ph
- return err;
- }
-
-+static int vsc8601_config_init(struct phy_device *phydev)
-+{
-+ int err;
-+ int extcon;
-+
-+ err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
-+ MII_VSC8244_AUXCONSTAT_INIT);
-+
-+ if (err < 0)
-+ return err;
-+
-+#ifdef CONFIG_VITESSE_PHY_8601_SKEW
-+ extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
-+ if (err < 0)
-+ return err;
-+
-+ extcon |= MII_VSC8601_EXTCON1_SKEW;
-+
-+ err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
-+#endif
-+
-+ return err;
-+}
-+
- static int vsc824x_ack_interrupt(struct phy_device *phydev)
- {
- int err = 0;
--
-+
- /*
- * Don't bother to ACK the interrupts if interrupts
- * are disabled. The 824x cannot clear the interrupts
-@@ -177,6 +207,19 @@ static struct phy_driver vsc82xx_driver[
- .ack_interrupt = &vsc824x_ack_interrupt,
- .config_intr = &vsc82xx_config_intr,
- .driver = { .owner = THIS_MODULE,},
-+}, {
-+ /* Vitesse 8601 */
-+ .phy_id = PHY_ID_VSC8601,
-+ .name = "Vitesse VSC8601",
-+ .phy_id_mask = 0x000ffff8,
-+ .features = PHY_GBIT_FEATURES,
-+ .flags = PHY_HAS_INTERRUPT,
-+ .config_init = &vsc8601_config_init,
-+ .config_aneg = &genphy_config_aneg,
-+ .read_status = &genphy_read_status,
-+ .ack_interrupt = &vsc824x_ack_interrupt,
-+ .config_intr = &vsc82xx_config_intr,
-+ .driver = { .owner = THIS_MODULE,},
- } };
-
- static int __init vsc82xx_init(void)
+++ /dev/null
---- a/drivers/net/ethernet/freescale/gianfar.c
-+++ b/drivers/net/ethernet/freescale/gianfar.c
-@@ -1005,7 +1005,16 @@ static int gfar_probe(struct platform_de
- /* We need to delay at least 3 TX clocks */
- udelay(2);
-
-- tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
-+ if ((mfspr(SPRN_SVR) & 0xffff) >= 0x0011) {
-+ tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
-+ } else {
-+ /*
-+ * Do not enable flow control on chips earlier than rev 1.1,
-+ * because of the eTSEC27 erratum
-+ */
-+ tempval = 0;
-+ }
-+
- gfar_write(®s->maccfg1, tempval);
-
- /* Initialize MACCFG2. */
+++ /dev/null
---- /dev/null
-+++ b/drivers/misc/ucc_tdm.h
-@@ -0,0 +1,221 @@
-+/*
-+ * drivers/misc/ucc_tdm.h
-+ *
-+ * UCC Based Linux TDM Driver
-+ * This driver is designed to support UCC based TDM for PowerPC processors.
-+ * This driver can interface with SLIC device to run VOIP kind of
-+ * applications.
-+ *
-+ * Author: Ashish Kalra & Poonam Aggrwal
-+ *
-+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef TDM_H
-+#define TDM_H
-+
-+#define NUM_TS 8
-+#define ACTIVE_CH 8
-+
-+/* SAMPLE_DEPTH is the sample depth is the number of frames before
-+ * an interrupt. Must be a multiple of 4
-+ */
-+#define SAMPLE_DEPTH 80
-+
-+/* define the number of Rx interrupts to go by for initial stuttering */
-+#define STUTTER_INT_CNT 1
-+
-+/* BMRx Field Descriptions to specify tstate and rstate in UCC parameter RAM*/
-+#define EN_BUS_SNOOPING 0x20
-+#define BE_BO 0x10
-+
-+/* UPSMR Register for Transparent UCC controller Bit definitions*/
-+#define NBO 0x00000000 /* Normal Mode 1 bit of data per clock */
-+
-+/* SI Mode register bit definitions */
-+#define NORMAL_OPERATION 0x0000
-+#define AUTO_ECHO 0x0400
-+#define INTERNAL_LB 0x0800
-+#define CONTROL_LB 0x0c00
-+#define SIMODE_CRT (0x8000 >> 9)
-+#define SIMODE_SL (0x8000 >> 10)
-+#define SIMODE_CE (0x8000 >> 11)
-+#define SIMODE_FE (0x8000 >> 12)
-+#define SIMODE_GM (0x8000 >> 13)
-+#define SIMODE_TFSD(val) (val)
-+#define SIMODE_RFSD(val) ((val) << 8)
-+
-+#define SI_TDM_MODE_REGISTER_OFFSET 0
-+
-+#define R_CM 0x02000000
-+#define T_CM 0x02000000
-+
-+#define SET_RX_SI_RAM(n, val) \
-+ out_be16((u16 *)&qe_immr->sir.rx[(n)*2], (u16)(val))
-+
-+#define SET_TX_SI_RAM(n, val) \
-+ out_be16((u16 *)&qe_immr->sir.tx[(n)*2], (u16)(val))
-+
-+/* SI RAM entries */
-+#define SIR_LAST 0x0001
-+#define SIR_CNT(n) ((n) << 2)
-+#define SIR_BYTE 0x0002
-+#define SIR_BIT 0x0000
-+#define SIR_IDLE 0
-+#define SIR_UCC(uccx) (((uccx+9)) << 5)
-+
-+/* BRGC Register Bit definitions */
-+#define BRGC_RESET (0x1<<17)
-+#define BRGC_EN (0x1<<16)
-+#define BRGC_EXTC_QE (0x00<<14)
-+#define BRGC_EXTC_CLK3 (0x01<<14)
-+#define BRGC_EXTC_CLK5 (0x01<<15)
-+#define BRGC_EXTC_CLK9 (0x01<<14)
-+#define BRGC_EXTC_CLK11 (0x01<<14)
-+#define BRGC_EXTC_CLK13 (0x01<<14)
-+#define BRGC_EXTC_CLK15 (0x01<<15)
-+#define BRGC_ATB (0x1<<13)
-+#define BRGC_DIV16 (0x1)
-+
-+/* structure representing UCC transparent parameter RAM */
-+struct ucc_transparent_pram {
-+ __be16 riptr;
-+ __be16 tiptr;
-+ __be16 res0;
-+ __be16 mrblr;
-+ __be32 rstate;
-+ __be32 rbase;
-+ __be16 rbdstat;
-+ __be16 rbdlen;
-+ __be32 rdptr;
-+ __be32 tstate;
-+ __be32 tbase;
-+ __be16 tbdstat;
-+ __be16 tbdlen;
-+ __be32 tdptr;
-+ __be32 rbptr;
-+ __be32 tbptr;
-+ __be32 rcrc;
-+ __be32 res1;
-+ __be32 tcrc;
-+ __be32 res2;
-+ __be32 res3;
-+ __be32 c_mask;
-+ __be32 c_pres;
-+ __be16 disfc;
-+ __be16 crcec;
-+ __be32 res4[4];
-+ __be16 ts_tmp;
-+ __be16 tmp_mb;
-+};
-+
-+#define UCC_TRANSPARENT_PRAM_SIZE 0x100
-+
-+struct tdm_cfg {
-+ u8 com_pin; /* Common receive and transmit pins
-+ * 0 = separate pins
-+ * 1 = common pins
-+ */
-+
-+ u8 fr_sync_level; /* SLx bit Frame Sync Polarity
-+ * 0 = L1R/TSYNC active logic "1"
-+ * 1 = L1R/TSYNC active logic "0"
-+ */
-+
-+ u8 clk_edge; /* CEx bit Tx Rx Clock Edge
-+ * 0 = TX data on rising edge of clock
-+ * RX data on falling edge
-+ * 1 = TX data on falling edge of clock
-+ * RX data on rising edge
-+ */
-+
-+ u8 fr_sync_edge; /* FEx bit Frame sync edge
-+ * Determine when the sync pulses are sampled
-+ * 0 = Falling edge
-+ * 1 = Rising edge
-+ */
-+
-+ u8 rx_fr_sync_delay; /* TFSDx/RFSDx bits Frame Sync Delay
-+ * 00 = no bit delay
-+ * 01 = 1 bit delay
-+ * 10 = 2 bit delay
-+ * 11 = 3 bit delay
-+ */
-+
-+ u8 tx_fr_sync_delay; /* TFSDx/RFSDx bits Frame Sync Delay
-+ * 00 = no bit delay
-+ * 01 = 1 bit delay
-+ * 10 = 2 bit delay
-+ * 11 = 3 bit delay
-+ */
-+
-+ u8 active_num_ts; /* Number of active time slots in TDM
-+ * assume same active Rx/Tx time slots
-+ */
-+};
-+
-+struct ucc_tdm_info {
-+ struct ucc_fast_info uf_info;
-+ u32 ucc_busy;
-+};
-+
-+struct tdm_ctrl {
-+ u32 device_busy;
-+ struct device *device;
-+ struct ucc_fast_private *uf_private;
-+ struct ucc_tdm_info *ut_info;
-+ u32 tdm_port; /* port for this tdm:TDMA,TDMB,TDMC,TDMD */
-+ u32 si; /* serial interface: 0 or 1 */
-+ struct ucc_fast __iomem *uf_regs; /* UCC Fast registers */
-+ u16 rx_mask[8]; /* Active Receive channels LSB is ch0 */
-+ u16 tx_mask[8]; /* Active Transmit channels LSB is ch0 */
-+ /* Only channels less than the number of FRAME_SIZE are implemented */
-+ struct tdm_cfg cfg_ctrl; /* Signaling controls configuration */
-+ u8 *tdm_input_data; /* buffer used for Rx by the tdm */
-+ u8 *tdm_output_data; /* buffer used for Tx by the tdm */
-+
-+ dma_addr_t dma_input_addr; /* dma mapped buffer for TDM Rx */
-+ dma_addr_t dma_output_addr; /* dma mapped buffer for TDM Tx */
-+ u16 physical_num_ts; /* physical number of timeslots in the tdm
-+ frame */
-+ u32 phase_rx; /* cycles through 0, 1, 2 */
-+ u32 phase_tx; /* cycles through 0, 1, 2 */
-+ /*
-+ * the following two variables are for dealing with "stutter" problem
-+ * "stutter" period is about 20 frames or so, varies depending active
-+ * channel num depending on the sample depth, the code should let a
-+ * few Rx interrupts go by
-+ */
-+ u32 tdm_icnt;
-+ u32 tdm_flag;
-+ struct ucc_transparent_pram __iomem *ucc_pram;
-+ struct qe_bd __iomem *tx_bd;
-+ struct qe_bd __iomem *rx_bd;
-+ u32 ucc_pram_offset;
-+ u32 tx_bd_offset;
-+ u32 rx_bd_offset;
-+ u32 rx_ucode_buf_offset;
-+ u32 tx_ucode_buf_offset;
-+ bool leg_slic;
-+ wait_queue_head_t wakeup_event;
-+};
-+
-+struct tdm_client {
-+ u32 client_id;
-+ void (*tdm_read)(u32 client_id, short chn_id,
-+ short *pcm_buffer, short len);
-+ void (*tdm_write)(u32 client_id, short chn_id,
-+ short *pcm_buffer, short len);
-+ wait_queue_head_t *wakeup_event;
-+ };
-+
-+#define MAX_PHASE 1
-+#define NR_BUFS 2
-+#define EFF_ACTIVE_CH ACTIVE_CH / 2
-+
-+#endif
---- /dev/null
-+++ b/drivers/misc/ucc_tdm.c
-@@ -0,0 +1,1017 @@
-+/*
-+ * drivers/misc/ucc_tdm.c
-+ *
-+ * UCC Based Linux TDM Driver
-+ * This driver is designed to support UCC based TDM for PowerPC processors.
-+ * This driver can interface with SLIC device to run VOIP kind of
-+ * applications.
-+ *
-+ * Author: Ashish Kalra & Poonam Aggrwal
-+ *
-+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+#include <linux/time.h>
-+#include <linux/skbuff.h>
-+#include <linux/proc_fs.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/string.h>
-+#include <linux/irq.h>
-+#include <linux/of_platform.h>
-+#include <linux/io.h>
-+#include <linux/wait.h>
-+#include <linux/timer.h>
-+
-+#include <asm/immap_qe.h>
-+#include <asm/qe.h>
-+#include <asm/ucc.h>
-+#include <asm/ucc_fast.h>
-+#include <asm/ucc_slow.h>
-+
-+#include "ucc_tdm.h"
-+#define DRV_DESC "Freescale QE UCC TDM Driver"
-+#define DRV_NAME "ucc_tdm"
-+
-+
-+/*
-+ * define the following #define if snooping or hardware-based cache coherency
-+ * is disabled on the UCC transparent controller.This flag enables
-+ * software-based cache-coherency support by explicitly flushing data cache
-+ * contents after setting up the TDM output buffer(s) and invalidating the
-+ * data cache contents before the TDM input buffer(s) are read.
-+ */
-+#undef UCC_CACHE_SNOOPING_DISABLED
-+
-+#define MAX_NUM_TDM_DEVICES 8
-+
-+static struct tdm_ctrl *tdm_ctrl[MAX_NUM_TDM_DEVICES];
-+
-+static int num_tdm_devices;
-+static int num_tdm_clients;
-+
-+static struct ucc_tdm_info utdm_primary_info = {
-+ .uf_info = {
-+ .tsa = 1,
-+ .cdp = 1,
-+ .cds = 1,
-+ .ctsp = 1,
-+ .ctss = 1,
-+ .revd = 1,
-+ .urfs = 0x128,
-+ .utfs = 0x128,
-+ .utfet = 0,
-+ .utftt = 0x128,
-+ .ufpt = 256,
-+ .ttx_trx = UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT,
-+ .tenc = UCC_FAST_TX_ENCODING_NRZ,
-+ .renc = UCC_FAST_RX_ENCODING_NRZ,
-+ .tcrc = UCC_FAST_16_BIT_CRC,
-+ .synl = UCC_FAST_SYNC_LEN_NOT_USED,
-+ },
-+ .ucc_busy = 0,
-+};
-+
-+static struct ucc_tdm_info utdm_info[8];
-+
-+static void dump_siram(struct tdm_ctrl *tdm_c)
-+{
-+#ifdef DEBUG
-+ int i;
-+ u16 phy_num_ts;
-+
-+ phy_num_ts = tdm_c->physical_num_ts;
-+
-+ pr_debug("SI TxRAM dump\n");
-+ /* each slot entry in SI RAM is of 2 bytes */
-+ for (i = 0; i < phy_num_ts * 2; i++)
-+ pr_debug("%x ", in_8(&qe_immr->sir.tx[i]));
-+ pr_debug("\nSI RxRAM dump\n");
-+ for (i = 0; i < phy_num_ts * 2; i++)
-+ pr_debug("%x ", in_8(&qe_immr->sir.rx[i]));
-+ pr_debug("\n");
-+#endif
-+}
-+
-+static void dump_ucc(struct tdm_ctrl *tdm_c)
-+{
-+#ifdef DEBUG
-+ struct ucc_transparent_pram *ucc_pram;
-+
-+ ucc_pram = tdm_c->ucc_pram;
-+
-+ pr_debug("%s Dumping UCC Registers\n", __FUNCTION__);
-+ ucc_fast_dump_regs(tdm_c->uf_private);
-+ pr_debug("%s Dumping UCC Parameter RAM\n", __FUNCTION__);
-+ pr_debug("rbase = 0x%x\n", in_be32(&ucc_pram->rbase));
-+ pr_debug("rbptr = 0x%x\n", in_be32(&ucc_pram->rbptr));
-+ pr_debug("mrblr = 0x%x\n", in_be16(&ucc_pram->mrblr));
-+ pr_debug("rbdlen = 0x%x\n", in_be16(&ucc_pram->rbdlen));
-+ pr_debug("rbdstat = 0x%x\n", in_be16(&ucc_pram->rbdstat));
-+ pr_debug("rstate = 0x%x\n", in_be32(&ucc_pram->rstate));
-+ pr_debug("rdptr = 0x%x\n", in_be32(&ucc_pram->rdptr));
-+ pr_debug("tbase = 0x%x\n", in_be32(&ucc_pram->tbase));
-+ pr_debug("tbptr = 0x%x\n", in_be32(&ucc_pram->tbptr));
-+ pr_debug("tbdlen = 0x%x\n", in_be16(&ucc_pram->tbdlen));
-+ pr_debug("tbdstat = 0x%x\n", in_be16(&ucc_pram->tbdstat));
-+ pr_debug("tstate = 0x%x\n", in_be32(&ucc_pram->tstate));
-+ pr_debug("tdptr = 0x%x\n", in_be32(&ucc_pram->tdptr));
-+#endif
-+}
-+
-+/*
-+ * For use when a framing bit is not present
-+ * Program current-route SI ram
-+ * Set SIxRAM TDMx
-+ * Entries must be in units of 8.
-+ * SIR_UCC -> Channel Select
-+ * SIR_CNT -> Number of bits or bytes
-+ * SIR_BYTE -> Byte or Bit resolution
-+ * SIR_LAST -> Indicates last entry in SIxRAM
-+ * SIR_IDLE -> The Tx data pin is Tri-stated and the Rx data pin is
-+ * ignored
-+ */
-+static void set_siram(struct tdm_ctrl *tdm_c, enum comm_dir dir)
-+{
-+ const u16 *mask;
-+ u16 temp_mask = 1;
-+ u16 siram_code = 0;
-+ u32 i, j, k;
-+ u32 ucc;
-+ u32 phy_num_ts;
-+
-+ phy_num_ts = tdm_c->physical_num_ts;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+
-+ if (dir == COMM_DIR_RX)
-+ mask = tdm_c->rx_mask;
-+ else
-+ mask = tdm_c->tx_mask;
-+ k = 0;
-+ j = 0;
-+ for (i = 0; i < phy_num_ts; i++) {
-+ if ((mask[k] & temp_mask) == temp_mask)
-+ siram_code = SIR_UCC(ucc) | SIR_CNT(0) | SIR_BYTE;
-+ else
-+ siram_code = SIR_IDLE | SIR_CNT(0) | SIR_BYTE;
-+ if (dir == COMM_DIR_RX)
-+ out_be16((u16 *)&qe_immr->sir.rx[i * 2], siram_code);
-+ else
-+ out_be16((u16 *)&qe_immr->sir.tx[i * 2], siram_code);
-+ temp_mask = temp_mask << 1;
-+ j++;
-+ if (j >= 16) {
-+ j = 0;
-+ temp_mask = 0x0001;
-+ k++;
-+ }
-+ }
-+ siram_code = siram_code | SIR_LAST;
-+
-+ if (dir == COMM_DIR_RX)
-+ out_be16((u16 *)&qe_immr->sir.rx[(phy_num_ts - 1) * 2],
-+ siram_code);
-+ else
-+ out_be16((u16 *)&qe_immr->sir.tx[(phy_num_ts - 1) * 2],
-+ siram_code);
-+}
-+
-+static void config_si(struct tdm_ctrl *tdm_c)
-+{
-+ u8 rxsyncdelay, txsyncdelay, tdm_port;
-+ u16 sixmr_val = 0;
-+ u32 tdma_mode_off;
-+ u16 *si1_tdm_mode_reg;
-+
-+ tdm_port = tdm_c->tdm_port;
-+
-+ set_siram(tdm_c, COMM_DIR_RX);
-+
-+ set_siram(tdm_c, COMM_DIR_TX);
-+
-+ rxsyncdelay = tdm_c->cfg_ctrl.rx_fr_sync_delay;
-+ txsyncdelay = tdm_c->cfg_ctrl.tx_fr_sync_delay;
-+ if (tdm_c->cfg_ctrl.com_pin)
-+ sixmr_val |= SIMODE_CRT;
-+ if (tdm_c->cfg_ctrl.fr_sync_level == 1)
-+ sixmr_val |= SIMODE_SL;
-+ if (tdm_c->cfg_ctrl.clk_edge == 1)
-+ sixmr_val |= SIMODE_CE;
-+ if (tdm_c->cfg_ctrl.fr_sync_edge == 1)
-+ sixmr_val |= SIMODE_FE;
-+ sixmr_val |= (SIMODE_TFSD(txsyncdelay) | SIMODE_RFSD(rxsyncdelay));
-+
-+ tdma_mode_off = SI_TDM_MODE_REGISTER_OFFSET * tdm_c->tdm_port;
-+
-+ si1_tdm_mode_reg = (u8 *)&qe_immr->si1 + tdma_mode_off;
-+ out_be16(si1_tdm_mode_reg, sixmr_val);
-+
-+ dump_siram(tdm_c);
-+}
-+
-+static int tdm_init(struct tdm_ctrl *tdm_c)
-+{
-+ u32 tdm_port, ucc, act_num_ts;
-+ int ret, i, err;
-+ u32 cecr_subblock;
-+ u32 pram_offset;
-+ u32 rxbdt_offset;
-+ u32 txbdt_offset;
-+ u32 rx_ucode_buf_offset, tx_ucode_buf_offset;
-+ u16 bd_status, bd_len;
-+ enum qe_clock clock;
-+ struct qe_bd __iomem *rx_bd, *tx_bd;
-+
-+ tdm_port = tdm_c->tdm_port;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+ act_num_ts = tdm_c->cfg_ctrl.active_num_ts;
-+
-+ /*
-+ * TDM Tx and Rx CLKs = 2048 KHz.
-+ */
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_tx_clk, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_tx_clk);
-+ err = qe_setbrg(clock, 2048000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_tx_clk);
-+ return err;
-+ }
-+ }
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_rx_clk, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_rx_clk);
-+ err = qe_setbrg(clock, 2048000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_rx_clk);
-+ return err;
-+ }
-+ }
-+ /*
-+ * TDM FSyncs = 4 KHz.
-+ */
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_tx_sync, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_tx_sync);
-+ err = qe_setbrg(clock, 4000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_tx_sync);
-+ return err;
-+ }
-+ }
-+ if (strstr(tdm_c->ut_info->uf_info.tdm_rx_sync, "BRG")) {
-+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_rx_sync);
-+ err = qe_setbrg(clock, 4000, 1);
-+ if (err < 0) {
-+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
-+ tdm_c->ut_info->uf_info.tdm_rx_sync);
-+ return err;
-+ }
-+ }
-+
-+ tdm_c->ut_info->uf_info.uccm_mask = (u32)
-+ ((UCC_TRANS_UCCE_RXB | UCC_TRANS_UCCE_BSY) << 16);
-+
-+ if (ucc_fast_init(&(tdm_c->ut_info->uf_info), &tdm_c->uf_private)) {
-+ printk(KERN_ERR "%s: Failed to init uccf\n", __FUNCTION__);
-+ return -ENOMEM;
-+ }
-+
-+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_RX | COMM_DIR_TX);
-+
-+ /* Write to QE CECR, UCCx channel to Stop Transmission */
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_STOP_TX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+
-+ pram_offset = qe_muram_alloc(UCC_TRANSPARENT_PRAM_SIZE,
-+ ALIGNMENT_OF_UCC_SLOW_PRAM);
-+ if (IS_ERR_VALUE(pram_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for"
-+ " transparent UCC\n", __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto pram_alloc_error;
-+ }
-+
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, cecr_subblock,
-+ QE_CR_PROTOCOL_UNSPECIFIED, pram_offset);
-+
-+ tdm_c->ucc_pram = qe_muram_addr(pram_offset);
-+ tdm_c->ucc_pram_offset = pram_offset;
-+
-+ /*
-+ * zero-out pram, this will also ensure RSTATE, TSTATE are cleared, also
-+ * DISFC & CRCEC counters will be initialized.
-+ */
-+ memset(tdm_c->ucc_pram, 0, sizeof(struct ucc_transparent_pram));
-+
-+ /* rbase, tbase alignment is 8. */
-+ rxbdt_offset = qe_muram_alloc(NR_BUFS * sizeof(struct qe_bd),
-+ QE_ALIGNMENT_OF_BD);
-+ if (IS_ERR_VALUE(rxbdt_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for RxBDs\n",
-+ __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto rxbd_alloc_error;
-+ }
-+ txbdt_offset = qe_muram_alloc(NR_BUFS * sizeof(struct qe_bd),
-+ QE_ALIGNMENT_OF_BD);
-+ if (IS_ERR_VALUE(txbdt_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for TxBDs\n",
-+ __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto txbd_alloc_error;
-+ }
-+ tdm_c->tx_bd = qe_muram_addr(txbdt_offset);
-+ tdm_c->rx_bd = qe_muram_addr(rxbdt_offset);
-+
-+ tdm_c->tx_bd_offset = txbdt_offset;
-+ tdm_c->rx_bd_offset = rxbdt_offset;
-+
-+ rx_bd = tdm_c->rx_bd;
-+ tx_bd = tdm_c->tx_bd;
-+
-+ out_be32(&tdm_c->ucc_pram->rbase, (u32) immrbar_virt_to_phys(rx_bd));
-+ out_be32(&tdm_c->ucc_pram->tbase, (u32) immrbar_virt_to_phys(tx_bd));
-+
-+ for (i = 0; i < NR_BUFS - 1; i++) {
-+ bd_status = (u16) ((R_E | R_CM | R_I) >> 16);
-+ bd_len = 0;
-+ out_be16(&rx_bd->length, bd_len);
-+ out_be16(&rx_bd->status, bd_status);
-+ out_be32(&rx_bd->buf,
-+ tdm_c->dma_input_addr + i * SAMPLE_DEPTH * act_num_ts);
-+ rx_bd += 1;
-+
-+ bd_status = (u16) ((T_R | T_CM) >> 16);
-+ bd_len = SAMPLE_DEPTH * act_num_ts;
-+ out_be16(&tx_bd->length, bd_len);
-+ out_be16(&tx_bd->status, bd_status);
-+ out_be32(&tx_bd->buf,
-+ tdm_c->dma_output_addr + i * SAMPLE_DEPTH * act_num_ts);
-+ tx_bd += 1;
-+ }
-+
-+ bd_status = (u16) ((R_E | R_CM | R_I | R_W) >> 16);
-+ bd_len = 0;
-+ out_be16(&rx_bd->length, bd_len);
-+ out_be16(&rx_bd->status, bd_status);
-+ out_be32(&rx_bd->buf,
-+ tdm_c->dma_input_addr + i * SAMPLE_DEPTH * act_num_ts);
-+
-+ bd_status = (u16) ((T_R | T_CM | T_W) >> 16);
-+ bd_len = SAMPLE_DEPTH * act_num_ts;
-+ out_be16(&tx_bd->length, bd_len);
-+ out_be16(&tx_bd->status, bd_status);
-+ out_be32(&tx_bd->buf,
-+ tdm_c->dma_output_addr + i * SAMPLE_DEPTH * act_num_ts);
-+
-+ config_si(tdm_c);
-+
-+ setbits32(&qe_immr->ic.qimr, (0x80000000UL >> ucc));
-+
-+ rx_ucode_buf_offset = qe_muram_alloc(32, 32);
-+ if (IS_ERR_VALUE(rx_ucode_buf_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM mem for Rx"
-+ " ucode buf\n", __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto rxucode_buf_alloc_error;
-+ }
-+
-+ tx_ucode_buf_offset = qe_muram_alloc(32, 32);
-+ if (IS_ERR_VALUE(tx_ucode_buf_offset)) {
-+ printk(KERN_ERR "%s: Cannot allocate MURAM mem for Tx"
-+ " ucode buf\n", __FUNCTION__);
-+ ret = -ENOMEM;
-+ goto txucode_buf_alloc_error;
-+ }
-+ out_be16(&tdm_c->ucc_pram->riptr, (u16) rx_ucode_buf_offset);
-+ out_be16(&tdm_c->ucc_pram->tiptr, (u16) tx_ucode_buf_offset);
-+
-+ tdm_c->rx_ucode_buf_offset = rx_ucode_buf_offset;
-+ tdm_c->tx_ucode_buf_offset = tx_ucode_buf_offset;
-+
-+ /*
-+ * set the receive buffer descriptor maximum size to be
-+ * SAMPLE_DEPTH * number of active RX channels
-+ */
-+ out_be16(&tdm_c->ucc_pram->mrblr, (u16) SAMPLE_DEPTH * act_num_ts);
-+
-+ /*
-+ * enable snooping and BE byte ordering on the UCC pram's
-+ * tstate & rstate registers.
-+ */
-+ out_be32(&tdm_c->ucc_pram->tstate, 0x30000000UL);
-+ out_be32(&tdm_c->ucc_pram->rstate, 0x30000000UL);
-+
-+ /*Put UCC transparent controller into serial interface mode. */
-+ out_be32(&tdm_c->uf_regs->upsmr, 0);
-+
-+ /* Reset TX and RX for UCCx */
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+
-+ return 0;
-+
-+txucode_buf_alloc_error:
-+ qe_muram_free(rx_ucode_buf_offset);
-+rxucode_buf_alloc_error:
-+ qe_muram_free(txbdt_offset);
-+txbd_alloc_error:
-+ qe_muram_free(rxbdt_offset);
-+rxbd_alloc_error:
-+ qe_muram_free(pram_offset);
-+pram_alloc_error:
-+ ucc_fast_free(tdm_c->uf_private);
-+ return ret;
-+}
-+
-+static void tdm_deinit(struct tdm_ctrl *tdm_c)
-+{
-+ qe_muram_free(tdm_c->rx_ucode_buf_offset);
-+ qe_muram_free(tdm_c->tx_ucode_buf_offset);
-+
-+ if (tdm_c->rx_bd_offset) {
-+ qe_muram_free(tdm_c->rx_bd_offset);
-+ tdm_c->rx_bd = NULL;
-+ tdm_c->rx_bd_offset = 0;
-+ }
-+ if (tdm_c->tx_bd_offset) {
-+ qe_muram_free(tdm_c->tx_bd_offset);
-+ tdm_c->tx_bd = NULL;
-+ tdm_c->tx_bd_offset = 0;
-+ }
-+ if (tdm_c->ucc_pram_offset) {
-+ qe_muram_free(tdm_c->ucc_pram_offset);
-+ tdm_c->ucc_pram = NULL;
-+ tdm_c->ucc_pram_offset = 0;
-+ }
-+}
-+
-+
-+static irqreturn_t tdm_isr(int irq, void *dev_id)
-+{
-+ u8 *input_tdm_buffer, *output_tdm_buffer;
-+ u32 txb, rxb;
-+ u32 ucc;
-+ register u32 ucce = 0;
-+ struct tdm_ctrl *tdm_c;
-+ tdm_c = (struct tdm_ctrl *)dev_id;
-+
-+ tdm_c->tdm_icnt++;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+ input_tdm_buffer = tdm_c->tdm_input_data;
-+ output_tdm_buffer = tdm_c->tdm_output_data;
-+
-+ if (in_be32(tdm_c->uf_private->p_ucce) &
-+ (UCC_TRANS_UCCE_BSY << 16)) {
-+ out_be32(tdm_c->uf_private->p_ucce,
-+ (UCC_TRANS_UCCE_BSY << 16));
-+ pr_info("%s: From tdm isr busy interrupt\n",
-+ __FUNCTION__);
-+ dump_ucc(tdm_c);
-+
-+ return IRQ_HANDLED;
-+ }
-+
-+ if (tdm_c->tdm_flag == 1) {
-+ /* track phases for Rx/Tx */
-+ tdm_c->phase_rx += 1;
-+ if (tdm_c->phase_rx == MAX_PHASE)
-+ tdm_c->phase_rx = 0;
-+
-+ tdm_c->phase_tx += 1;
-+ if (tdm_c->phase_tx == MAX_PHASE)
-+ tdm_c->phase_tx = 0;
-+
-+#ifdef CONFIG_TDM_HW_LB_TSA_SLIC
-+ {
-+ u32 temp_rx, temp_tx, phase_tx, phase_rx;
-+ int i;
-+ phase_rx = tdm_c->phase_rx;
-+ phase_tx = tdm_c->phase_tx;
-+ if (phase_rx == 0)
-+ phase_rx = MAX_PHASE;
-+ else
-+ phase_rx -= 1;
-+ if (phase_tx == 0)
-+ phase_tx = MAX_PHASE;
-+ else
-+ phase_tx -= 1;
-+ temp_rx = phase_rx * SAMPLE_DEPTH * ACTIVE_CH;
-+ temp_tx = phase_tx * SAMPLE_DEPTH * ACTIVE_CH;
-+
-+ /*check if loopback received data on TS0 is correct. */
-+ pr_debug("%s: check if loopback received data on TS0"
-+ " is correct\n", __FUNCTION__);
-+ pr_debug("%d,%d ", phase_rx, phase_tx);
-+ for (i = 0; i < 8; i++)
-+ pr_debug("%1d,%1d ",
-+ input_tdm_buffer[temp_rx + i],
-+ output_tdm_buffer[temp_tx + i]);
-+ pr_debug("\n");
-+ }
-+#endif
-+
-+ /* schedule BH */
-+ wake_up_interruptible(&tdm_c->wakeup_event);
-+ } else {
-+ if (tdm_c->tdm_icnt == STUTTER_INT_CNT) {
-+ txb = in_be32(&tdm_c->ucc_pram->tbptr) -
-+ in_be32(&tdm_c->ucc_pram->tbase);
-+ rxb = in_be32(&tdm_c->ucc_pram->rbptr) -
-+ in_be32(&tdm_c->ucc_pram->rbase);
-+ tdm_c->phase_tx = txb / sizeof(struct qe_bd);
-+ tdm_c->phase_rx = rxb / sizeof(struct qe_bd);
-+
-+#ifdef CONFIG_TDM_HW_LB_TSA_SLIC
-+ tdm_c->phase_tx = tdm_c->phase_rx;
-+#endif
-+
-+ /* signal "stuttering" period is over */
-+ tdm_c->tdm_flag = 1;
-+
-+ pr_debug("%s: stuttering period is over\n",
-+ __FUNCTION__);
-+
-+ if (in_be32(tdm_c->uf_private->p_ucce) &
-+ (UCC_TRANS_UCCE_TXE << 16)) {
-+ u32 cecr_subblock;
-+ out_be32(tdm_c->uf_private->p_ucce,
-+ (UCC_TRANS_UCCE_TXE << 16));
-+ pr_debug("%s: From tdm isr txe interrupt\n",
-+ __FUNCTION__);
-+
-+ cecr_subblock =
-+ ucc_fast_get_qe_cr_subblock(ucc);
-+ qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED,
-+ 0);
-+ }
-+ }
-+ }
-+
-+ ucce = (in_be32(tdm_c->uf_private->p_ucce)
-+ & in_be32(tdm_c->uf_private->p_uccm));
-+
-+ out_be32(tdm_c->uf_private->p_ucce, ucce);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int tdm_start(struct tdm_ctrl *tdm_c)
-+{
-+ if (request_irq(tdm_c->ut_info->uf_info.irq, tdm_isr,
-+ 0, "tdm", tdm_c)) {
-+ printk(KERN_ERR "%s: request_irq for tdm_isr failed\n",
-+ __FUNCTION__);
-+ return -ENODEV;
-+ }
-+
-+ ucc_fast_enable(tdm_c->uf_private, COMM_DIR_RX | COMM_DIR_TX);
-+
-+ pr_info("%s 16-bit linear pcm mode active with"
-+ " slots 0 & 2\n", __FUNCTION__);
-+
-+ dump_siram(tdm_c);
-+ dump_ucc(tdm_c);
-+
-+ setbits8(&(qe_immr->si1.siglmr1_h), (0x1 << tdm_c->tdm_port));
-+ pr_info("%s UCC based TDM enabled\n", __FUNCTION__);
-+
-+ return 0;
-+}
-+
-+static void tdm_stop(struct tdm_ctrl *tdm_c)
-+{
-+ u32 port, si;
-+ u32 ucc;
-+ u32 cecr_subblock;
-+
-+ port = tdm_c->tdm_port;
-+ si = tdm_c->si;
-+ ucc = tdm_c->ut_info->uf_info.ucc_num;
-+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
-+
-+ qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+ qe_issue_cmd(QE_CLOSE_RX_BD, cecr_subblock,
-+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
-+
-+ clrbits8(&qe_immr->si1.siglmr1_h, (0x1 << port));
-+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_RX);
-+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_TX);
-+ free_irq(tdm_c->ut_info->uf_info.irq, tdm_c);
-+}
-+
-+
-+static void config_tdm(struct tdm_ctrl *tdm_c)
-+{
-+ u32 i, j, k;
-+
-+ j = 0;
-+ k = 0;
-+
-+ /* Set Mask Bits */
-+ for (i = 0; i < ACTIVE_CH; i++) {
-+ tdm_c->tx_mask[k] |= (1 << j);
-+ tdm_c->rx_mask[k] |= (1 << j);
-+ j++;
-+ if (j >= 16) {
-+ j = 0;
-+ k++;
-+ }
-+ }
-+ /* physical number of slots in a frame */
-+ tdm_c->physical_num_ts = NUM_TS;
-+
-+ /* common receive and transmit pins */
-+ tdm_c->cfg_ctrl.com_pin = 1;
-+
-+ /* L1R/TSYNC active logic "1" */
-+ tdm_c->cfg_ctrl.fr_sync_level = 0;
-+
-+ /*
-+ * TX data on rising edge of clock
-+ * RX data on falling edge
-+ */
-+ tdm_c->cfg_ctrl.clk_edge = 0;
-+
-+ /* Frame sync sampled on falling edge */
-+ tdm_c->cfg_ctrl.fr_sync_edge = 0;
-+
-+ /* no bit delay */
-+ tdm_c->cfg_ctrl.rx_fr_sync_delay = 0;
-+
-+ /* no bit delay */
-+ tdm_c->cfg_ctrl.tx_fr_sync_delay = 0;
-+
-+#ifndef CONFIG_TDM_HW_LB_TSA_SLIC
-+ if (tdm_c->leg_slic) {
-+ /* Need 1 bit delay for Legrity SLIC */
-+ tdm_c->cfg_ctrl.rx_fr_sync_delay = 1;
-+ tdm_c->cfg_ctrl.tx_fr_sync_delay = 1;
-+ pr_info("%s Delay for Legerity!\n", __FUNCTION__);
-+ }
-+#endif
-+
-+ tdm_c->cfg_ctrl.active_num_ts = ACTIVE_CH;
-+}
-+
-+static void tdm_read(u32 client_id, short chn_id, short *pcm_buffer,
-+ short len)
-+{
-+ int i;
-+ u32 phase_rx;
-+ /* point to where to start for the current phase data processing */
-+ u32 temp_rx;
-+
-+ struct tdm_ctrl *tdm_c = tdm_ctrl[client_id];
-+
-+ u16 *input_tdm_buffer =
-+ (u16 *)tdm_c->tdm_input_data;
-+
-+ phase_rx = tdm_c->phase_rx;
-+ if (phase_rx == 0)
-+ phase_rx = MAX_PHASE;
-+ else
-+ phase_rx -= 1;
-+
-+ temp_rx = phase_rx * SAMPLE_DEPTH * EFF_ACTIVE_CH;
-+
-+#ifdef UCC_CACHE_SNOOPING_DISABLED
-+ flush_dcache_range((size_t) &input_tdm_buffer[temp_rx],
-+ (size_t) &input_tdm_buffer[temp_rx +
-+ SAMPLE_DEPTH * ACTIVE_CH]);
-+#endif
-+ for (i = 0; i < len; i++)
-+ pcm_buffer[i] =
-+ input_tdm_buffer[i * EFF_ACTIVE_CH + temp_rx + chn_id];
-+
-+}
-+
-+static void tdm_write(u32 client_id, short chn_id, short *pcm_buffer,
-+ short len)
-+{
-+ int i;
-+ int phase_tx;
-+ u32 txb;
-+ /* point to where to start for the current phase data processing */
-+ int temp_tx;
-+ struct tdm_ctrl *tdm_c = tdm_ctrl[client_id];
-+
-+ u16 *output_tdm_buffer;
-+ output_tdm_buffer = (u16 *)tdm_c->tdm_output_data;
-+ txb = in_be32(&tdm_c->ucc_pram->tbptr) -
-+ in_be32(&tdm_c->ucc_pram->tbase);
-+ phase_tx = txb / sizeof(struct qe_bd);
-+
-+ if (phase_tx == 0)
-+ phase_tx = MAX_PHASE;
-+ else
-+ phase_tx -= 1;
-+
-+ temp_tx = phase_tx * SAMPLE_DEPTH * EFF_ACTIVE_CH;
-+
-+ for (i = 0; i < len; i++)
-+ output_tdm_buffer[i * EFF_ACTIVE_CH + temp_tx + chn_id] =
-+ pcm_buffer[i];
-+
-+#ifdef UCC_CACHE_SNOOPING_DISABLED
-+ flush_dcache_range((size_t) &output_tdm_buffer[temp_tx],
-+ (size_t) &output_tdm_buffer[temp_tx + SAMPLE_DEPTH *
-+ ACTIVE_CH]);
-+#endif
-+}
-+
-+
-+static int tdm_register_client(struct tdm_client *tdm_client)
-+{
-+ u32 i;
-+ if (num_tdm_clients == num_tdm_devices) {
-+ printk(KERN_ERR "all TDM devices busy\n");
-+ return -EBUSY;
-+ }
-+
-+ for (i = 0; i < num_tdm_devices; i++) {
-+ if (!tdm_ctrl[i]->device_busy) {
-+ tdm_ctrl[i]->device_busy = 1;
-+ break;
-+ }
-+ }
-+ num_tdm_clients++;
-+ tdm_client->client_id = i;
-+ tdm_client->tdm_read = tdm_read;
-+ tdm_client->tdm_write = tdm_write;
-+ tdm_client->wakeup_event =
-+ &(tdm_ctrl[i]->wakeup_event);
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(tdm_register_client);
-+
-+static int tdm_deregister_client(struct tdm_client *tdm_client)
-+{
-+ num_tdm_clients--;
-+ tdm_ctrl[tdm_client->client_id]->device_busy = 0;
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(tdm_deregister_client);
-+
-+static int ucc_tdm_probe(struct of_device *ofdev,
-+ const struct of_device_id *match)
-+{
-+ struct device_node *np = ofdev->node;
-+ struct resource res;
-+ const unsigned int *prop;
-+ u32 ucc_num, device_num, err, ret = 0;
-+ struct device_node *np_tmp;
-+ dma_addr_t physaddr;
-+ void *tdm_buff;
-+ struct ucc_tdm_info *ut_info;
-+
-+ prop = of_get_property(np, "device-id", NULL);
-+ if (prop == NULL) {
-+ printk(KERN_ERR "ucc_tdm: device-id missing\n");
-+ return -ENODEV;
-+ }
-+
-+ ucc_num = *prop - 1;
-+ if ((ucc_num < 0) || (ucc_num > 7))
-+ return -ENODEV;
-+
-+ ut_info = &utdm_info[ucc_num];
-+ if (ut_info->ucc_busy) {
-+ printk(KERN_ERR "ucc_tdm: UCC in use by another TDM driver"
-+ "instance\n");
-+ return -EBUSY;
-+ }
-+ if (num_tdm_devices == MAX_NUM_TDM_DEVICES) {
-+ printk(KERN_ERR "ucc_tdm: All TDM devices already"
-+ " initialized\n");
-+ return -ENODEV;
-+ }
-+
-+ ut_info->ucc_busy = 1;
-+ tdm_ctrl[num_tdm_devices++] =
-+ kzalloc(sizeof(struct tdm_ctrl), GFP_KERNEL);
-+ if (!tdm_ctrl[num_tdm_devices - 1]) {
-+ printk(KERN_ERR "ucc_tdm: no memory to allocate for"
-+ " tdm control structure\n");
-+ num_tdm_devices--;
-+ return -ENOMEM;
-+ }
-+ device_num = num_tdm_devices - 1;
-+
-+ tdm_ctrl[device_num]->device = &ofdev->dev;
-+ tdm_ctrl[device_num]->ut_info = ut_info;
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.ucc_num = ucc_num;
-+
-+ prop = of_get_property(np, "fsl,tdm-num", NULL);
-+ if (prop == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->tdm_port = *prop - 1;
-+
-+ if (tdm_ctrl[device_num]->tdm_port > 3) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ prop = of_get_property(np, "fsl,si-num", NULL);
-+ if (prop == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->si = *prop - 1;
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_clk =
-+ of_get_property(np, "fsl,tdm-tx-clk", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_clk == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_clk =
-+ of_get_property(np, "fsl,tdm-rx-clk", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_clk == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_sync =
-+ of_get_property(np, "fsl,tdm-tx-sync", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_sync == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_sync =
-+ of_get_property(np, "fsl,tdm-rx-sync", NULL);
-+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_sync == NULL) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+
-+ tdm_ctrl[device_num]->ut_info->uf_info.irq =
-+ irq_of_parse_and_map(np, 0);
-+ err = of_address_to_resource(np, 0, &res);
-+ if (err) {
-+ ret = -EINVAL;
-+ goto get_property_error;
-+ }
-+ tdm_ctrl[device_num]->ut_info->uf_info.regs = res.start;
-+ tdm_ctrl[device_num]->uf_regs = of_iomap(np, 0);
-+
-+ np_tmp = NULL;
-+ np_tmp = of_find_compatible_node(np_tmp, "slic", "legerity-slic");
-+ if (np_tmp != NULL) {
-+ tdm_ctrl[device_num]->leg_slic = 1;
-+ of_node_put(np_tmp);
-+ } else
-+ tdm_ctrl[device_num]->leg_slic = 0;
-+
-+ config_tdm(tdm_ctrl[device_num]);
-+
-+ tdm_buff = dma_alloc_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
-+ tdm_ctrl[device_num]->cfg_ctrl.active_num_ts,
-+ &physaddr, GFP_KERNEL);
-+ if (!tdm_buff) {
-+ printk(KERN_ERR "ucc-tdm: could not allocate buffer"
-+ "descriptors\n");
-+ ret = -ENOMEM;
-+ goto alloc_error;
-+ }
-+
-+ tdm_ctrl[device_num]->tdm_input_data = tdm_buff;
-+ tdm_ctrl[device_num]->dma_input_addr = physaddr;
-+
-+ tdm_ctrl[device_num]->tdm_output_data = tdm_buff + NR_BUFS *
-+ SAMPLE_DEPTH * tdm_ctrl[device_num]->cfg_ctrl.active_num_ts;
-+ tdm_ctrl[device_num]->dma_output_addr = physaddr + NR_BUFS *
-+ SAMPLE_DEPTH * tdm_ctrl[device_num]->cfg_ctrl.active_num_ts;
-+
-+ init_waitqueue_head(&(tdm_ctrl[device_num]->wakeup_event));
-+
-+ ret = tdm_init(tdm_ctrl[device_num]);
-+ if (ret != 0)
-+ goto tdm_init_error;
-+
-+ ret = tdm_start(tdm_ctrl[device_num]);
-+ if (ret != 0)
-+ goto tdm_start_error;
-+
-+ dev_set_drvdata(&(ofdev->dev), tdm_ctrl[device_num]);
-+
-+ pr_info("%s UCC based tdm module installed\n", __FUNCTION__);
-+ return 0;
-+
-+tdm_start_error:
-+ tdm_deinit(tdm_ctrl[device_num]);
-+tdm_init_error:
-+ dma_free_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
-+ tdm_ctrl[device_num]->cfg_ctrl.active_num_ts,
-+ tdm_ctrl[device_num]->tdm_input_data,
-+ tdm_ctrl[device_num]->dma_input_addr);
-+
-+alloc_error:
-+ irq_dispose_mapping(tdm_ctrl[device_num]->ut_info->uf_info.irq);
-+ iounmap(tdm_ctrl[device_num]->uf_regs);
-+
-+get_property_error:
-+ num_tdm_devices--;
-+ kfree(tdm_ctrl[device_num]);
-+ ut_info->ucc_busy = 0;
-+ return ret;
-+}
-+
-+static int ucc_tdm_remove(struct of_device *ofdev)
-+{
-+ struct tdm_ctrl *tdm_c;
-+ struct ucc_tdm_info *ut_info;
-+ u32 ucc_num;
-+
-+ tdm_c = dev_get_drvdata(&(ofdev->dev));
-+ dev_set_drvdata(&(ofdev->dev), NULL);
-+ ucc_num = tdm_c->ut_info->uf_info.ucc_num;
-+ ut_info = &utdm_info[ucc_num];
-+ tdm_stop(tdm_c);
-+ tdm_deinit(tdm_c);
-+
-+ ucc_fast_free(tdm_c->uf_private);
-+
-+ dma_free_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
-+ tdm_c->cfg_ctrl.active_num_ts,
-+ tdm_c->tdm_input_data,
-+ tdm_c->dma_input_addr);
-+
-+ irq_dispose_mapping(tdm_c->ut_info->uf_info.irq);
-+ iounmap(tdm_c->uf_regs);
-+
-+ num_tdm_devices--;
-+ kfree(tdm_c);
-+
-+ ut_info->ucc_busy = 0;
-+
-+ pr_info("%s UCC based tdm module uninstalled\n", __FUNCTION__);
-+ return 0;
-+}
-+
-+const struct of_device_id ucc_tdm_match[] = {
-+ { .type = "tdm", .compatible = "fsl,ucc-tdm", },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, ucc_tdm_match);
-+
-+static struct of_platform_driver ucc_tdm_driver = {
-+ .name = DRV_NAME,
-+ .match_table = ucc_tdm_match,
-+ .probe = ucc_tdm_probe,
-+ .remove = ucc_tdm_remove,
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init ucc_tdm_init(void)
-+{
-+ u32 i;
-+
-+ pr_info("ucc_tdm: " DRV_DESC "\n");
-+ for (i = 0; i < 8; i++)
-+ memcpy(&(utdm_info[i]), &utdm_primary_info,
-+ sizeof(utdm_primary_info));
-+
-+ return of_register_platform_driver(&ucc_tdm_driver);
-+}
-+
-+static void __exit ucc_tdm_exit(void)
-+{
-+ of_unregister_platform_driver(&ucc_tdm_driver);
-+}
-+
-+module_init(ucc_tdm_init);
-+module_exit(ucc_tdm_exit);
-+MODULE_AUTHOR("Freescale Semiconductor, Inc");
-+MODULE_DESCRIPTION(DRV_DESC);
-+MODULE_LICENSE("GPL");
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_INTEL_MID_PTI) += pti.o
- obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
- obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
- obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
-+obj-$(CONFIG_UCC_TDM) += ucc_tdm.o
- obj-$(CONFIG_BMP085) += bmp085.o
- obj-$(CONFIG_BMP085_I2C) += bmp085-i2c.o
- obj-$(CONFIG_BMP085_SPI) += bmp085-spi.o
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -202,6 +202,20 @@ config ATMEL_SSC
-
- If unsure, say N.
-
-+config UCC_TDM
-+ tristate "Freescale UCC TDM Driver"
-+ depends on QUICC_ENGINE && UCC_FAST
-+ default n
-+ help
-+ The TDM driver is for UCC based TDM devices for example, TDM device on
-+ MPC832x RDB. Select it to run PowerVoIP on MPC832x RDB board.
-+ The TDM driver can interface with SLIC kind of devices to transmit
-+ and receive TDM samples. The TDM driver receives Time Division
-+ multiplexed samples(for different channels) from the SLIC device,
-+ demutiplexes them and sends them to the upper layers. At the transmit
-+ end the TDM drivers receives samples for different channels, it
-+ multiplexes them and sends them to the SLIC device.
-+
- config ENCLOSURE_SERVICES
- tristate "Enclosure Services"
- default n
---- a/arch/powerpc/include/asm/ucc_fast.h
-+++ b/arch/powerpc/include/asm/ucc_fast.h
-@@ -150,6 +150,10 @@ struct ucc_fast_info {
- enum ucc_fast_rx_decoding_method renc;
- enum ucc_fast_transparent_tcrc tcrc;
- enum ucc_fast_sync_len synl;
-+ char *tdm_rx_clk;
-+ char *tdm_tx_clk;
-+ char *tdm_rx_sync;
-+ char *tdm_tx_sync;
- };
-
- struct ucc_fast_private {
---- a/arch/powerpc/include/asm/qe.h
-+++ b/arch/powerpc/include/asm/qe.h
-@@ -670,6 +670,14 @@ struct ucc_slow_pram {
- #define UCC_GETH_UCCE_RXF1 0x00000002
- #define UCC_GETH_UCCE_RXF0 0x00000001
-
-+/* Transparent UCC Event Register (UCCE) */
-+#define UCC_TRANS_UCCE_GRA 0x0080
-+#define UCC_TRANS_UCCE_TXE 0x0010
-+#define UCC_TRANS_UCCE_RXF 0x0008
-+#define UCC_TRANS_UCCE_BSY 0x0004
-+#define UCC_TRANS_UCCE_TXB 0x0002
-+#define UCC_TRANS_UCCE_RXB 0x0001
-+
- /* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
- #define UCC_UART_UPSMR_FLC 0x8000
- #define UCC_UART_UPSMR_SL 0x4000
+++ /dev/null
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -89,7 +89,8 @@ src-plat-$(CONFIG_44x) += treeboot-ebony
- src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
- src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
- src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
--src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c
-+src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c \
-+ rb600.c rb333.c
- src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
- src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
- cuboot-c2k.c gamecube-head.S \
-@@ -261,6 +262,8 @@ image-$(CONFIG_MPC834x_ITX) += cuImage.
- image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds
- image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds
- image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot
-+image-$(CONFIG_RB_PPC) += dtbImage.rb600 \
-+ dtbImage.rb333
-
- # Board ports in arch/powerpc/platform/85xx/Kconfig
- image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
---- /dev/null
-+++ b/arch/powerpc/boot/dts/rb600.dts
-@@ -0,0 +1,283 @@
-+/*
-+ * RouterBOARD 600 series Device Tree Source
-+ *
-+ * Copyright 2009 Michael Guntsche <mike@it-loops.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+/dts-v1/;
-+
-+/ {
-+ model = "RB600";
-+ compatible = "MPC83xx";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ aliases {
-+ ethernet0 = &enet0;
-+ ethernet1 = &enet1;
-+ pci0 = &pci0;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 board=mpc8323 rootfstype=squashfs,yaffs2,jffs2 root=/dev/mtdblock1 boot=1";
-+ linux,stdout-path = "/soc8343@e0000000/serial@4500";
-+ };
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ PowerPC,8343E@0 {
-+ device_type = "cpu";
-+ reg = <0x0>;
-+ d-cache-line-size = <0x20>;
-+ i-cache-line-size = <0x20>;
-+ d-cache-size = <0x8000>;
-+ i-cache-size = <0x8000>;
-+ timebase-frequency = <0x0000000>; // filled by the bootwrapper from the firmware blob
-+ clock-frequency = <0x00000000>; // filled by the bootwrapper from the firmware blob
-+ };
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
-+ };
-+
-+ cf@f9200000 {
-+ lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
-+ interrupt-at-level = <0x0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x16 0x8>;
-+ lbc_extra_divider = <0x1>;
-+ reg = <0xf9200000 0x200000>;
-+ device_type = "rb,cf";
-+ };
-+
-+ cf@f9000000 {
-+ lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
-+ interrupt-at-level = <0x0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x14 0x8>;
-+ lbc_extra_divider = <0x1>;
-+ reg = <0xf9000000 0x200000>;
-+ device_type = "rb,cf";
-+ };
-+
-+ flash {
-+ reg = <0xff800000 0x20000>;
-+ };
-+
-+ nnand {
-+ reg = <0xf0000000 0x1000>;
-+ };
-+
-+ nand {
-+ ale = <&gpio 0x6>;
-+ cle = <&gpio 0x5>;
-+ nce = <&gpio 0x4>;
-+ rdy = <&gpio 0x3>;
-+ reg = <0xf8000000 0x1000>;
-+ device_type = "rb,nand";
-+ };
-+
-+ fancon {
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x17 0x8>;
-+ sense = <&gpio 0x7>;
-+ fan_on = <&gpio 0x9>;
-+ };
-+
-+ pci0: pci@e0008500 {
-+ device_type = "pci";
-+ compatible = "fsl,mpc8349-pci";
-+ reg = <0xe0008500 0x100 0xe0008300 0x8>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
-+ bus-range = <0x0 0x0>;
-+ interrupt-map = <
-+ 0x5800 0x0 0x0 0x1 &ipic 0x15 0x8
-+ 0x6000 0x0 0x0 0x1 &ipic 0x30 0x8
-+ 0x6000 0x0 0x0 0x2 &ipic 0x11 0x8
-+ 0x6800 0x0 0x0 0x1 &ipic 0x11 0x8
-+ 0x6800 0x0 0x0 0x2 &ipic 0x12 0x8
-+ 0x7000 0x0 0x0 0x1 &ipic 0x12 0x8
-+ 0x7000 0x0 0x0 0x2 &ipic 0x13 0x8
-+ 0x7800 0x0 0x0 0x1 &ipic 0x13 0x8
-+ 0x7800 0x0 0x0 0x2 &ipic 0x30 0x8
-+ 0x8000 0x0 0x0 0x1 &ipic 0x30 0x8
-+ 0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
-+ 0x8000 0x0 0x0 0x3 &ipic 0x11 0x8
-+ 0x8000 0x0 0x0 0x4 &ipic 0x13 0x8
-+ 0xa000 0x0 0x0 0x1 &ipic 0x30 0x8
-+ 0xa000 0x0 0x0 0x2 &ipic 0x11 0x8
-+ 0xa000 0x0 0x0 0x3 &ipic 0x12 0x8
-+ 0xa000 0x0 0x0 0x4 &ipic 0x13 0x8
-+ 0xa800 0x0 0x0 0x1 &ipic 0x11 0x8
-+ 0xa800 0x0 0x0 0x2 &ipic 0x12 0x8
-+ 0xa800 0x0 0x0 0x3 &ipic 0x13 0x8
-+ 0xa800 0x0 0x0 0x4 &ipic 0x30 0x8>;
-+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-+ interrupt-parent = <&ipic>;
-+ };
-+
-+ soc8343@e0000000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ device_type = "soc";
-+ compatible = "simple-bus";
-+ ranges = <0x0 0xe0000000 0x100000>;
-+ reg = <0xe0000000 0x200>;
-+ bus-frequency = <0x1>;
-+
-+ led {
-+ user_led = <0x400 0x8>;
-+ };
-+
-+ beeper {
-+ reg = <0x500 0x100>;
-+ };
-+
-+ gpio: gpio@0 {
-+ reg = <0xc08 0x4>;
-+ device-id = <0x0>;
-+ compatible = "gpio";
-+ device_type = "gpio";
-+ };
-+
-+ dma@82a8 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-+ reg = <0x82a8 4>;
-+ ranges = <0 0x8100 0x1a8>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ cell-index = <0>;
-+ dma-channel@0 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0 0x80>;
-+ cell-index = <0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@80 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x80 0x80>;
-+ cell-index = <1>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@100 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x100 0x80>;
-+ cell-index = <2>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@180 {
-+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x180 0x28>;
-+ cell-index = <3>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ };
-+
-+ enet0: ethernet@25000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ cell-index = <0>;
-+ phy-handle = <&phy0>;
-+ tbi-handle = <&tbi0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ reg = <0x25000 0x1000>;
-+ ranges = <0x0 0x25000 0x1000>;
-+ compatible = "gianfar";
-+ model = "TSEC";
-+ device_type = "network";
-+
-+ mdio@520 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "fsl,gianfar-tbi";
-+ reg = <0x520 0x20>;
-+
-+ tbi0: tbi-phy@11 {
-+ reg = <0x11>;
-+ device_type = "tbi-phy";
-+ };
-+ };
-+ };
-+
-+ enet1: ethernet@24000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ cell-index = <1>;
-+ phy-handle = <&phy1>;
-+ tbi-handle = <&tbi1>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ reg = <0x24000 0x1000>;
-+ ranges = <0x0 0x24000 0x1000>;
-+ compatible = "gianfar";
-+ model = "TSEC";
-+ device_type = "network";
-+
-+ mdio@520 {
-+ #size-cells = <0x0>;
-+ #address-cells = <0x1>;
-+ reg = <0x520 0x20>;
-+ compatible = "fsl,gianfar-mdio";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0x0>;
-+ };
-+
-+ phy1: ethernet-phy@1 {
-+ device_type = "ethernet-phy";
-+ reg = <0x1>;
-+ };
-+
-+ tbi1: tbi-phy@11 {
-+ reg = <0x11>;
-+ device_type = "tbi-phy";
-+ };
-+ };
-+ };
-+
-+ ipic: pic@700 {
-+ interrupt-controller;
-+ #address-cells = <0>;
-+ #interrupt-cells = <2>;
-+ reg = <0x700 0x100>;
-+ device_type = "ipic";
-+ };
-+
-+ serial@4500 {
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x9 0x8>;
-+ clock-frequency = <0xfe4f840>;
-+ reg = <0x4500 0x100>;
-+ compatible = "ns16550";
-+ device_type = "serial";
-+ };
-+
-+ wdt@200 {
-+ reg = <0x200 0x100>;
-+ compatible = "mpc83xx_wdt";
-+ device_type = "watchdog";
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/powerpc/boot/rb600.c
-@@ -0,0 +1,70 @@
-+/*
-+ * The RouterBOARD platform -- for booting RB600(A) RouterBOARDs.
-+ *
-+ * Author: Michael Guntsche <mike@it-loops.com>
-+ *
-+ * Copyright (c) 2009 Michael Guntsche
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "types.h"
-+#include "io.h"
-+#include "stdio.h"
-+#include <libfdt.h>
-+
-+BSS_STACK(4*1024);
-+
-+u64 memsize64;
-+const void *fw_dtb;
-+
-+static void rb600_fixups(void)
-+{
-+ const u32 *reg, *timebase, *clock;
-+ int node, size;
-+
-+ dt_fixup_memory(0, memsize64);
-+
-+ /* Set the MAC addresses. */
-+ node = fdt_path_offset(fw_dtb, "/soc8343@e0000000/ethernet@24000");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet1", (const u8 *)reg);
-+
-+ node = fdt_path_offset(fw_dtb, "/soc8343@e0000000/ethernet@25000");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet0", (const u8 *)reg);
-+
-+ /* Find the CPU timebase and clock frequencies. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "cpu", sizeof("cpu"));
-+ timebase = fdt_getprop(fw_dtb, node, "timebase-frequency", &size);
-+ clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
-+ dt_fixup_cpu_clocks(*clock, *timebase, 0);
-+
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+ unsigned long r6, unsigned long r7)
-+{
-+ const u32 *reg;
-+ int node, size;
-+
-+ fw_dtb = (const void *)r3;
-+
-+ /* Find the memory range. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "memory", sizeof("memory"));
-+ reg = fdt_getprop(fw_dtb, node, "reg", &size);
-+ memsize64 = reg[1];
-+
-+ /* Now we have the memory size; initialize the heap. */
-+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
-+
-+ /* Prepare the device tree and find the console. */
-+ fdt_init(_dtb_start);
-+ serial_console_init();
-+
-+ /* Remaining fixups... */
-+ platform_ops.fixups = rb600_fixups;
-+}
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -217,7 +217,7 @@ ps3)
- make_space=n
- pie=
- ;;
--ep88xc|ep405|ep8248e)
-+ep88xc|ep405|ep8248e|rb600|rb333)
- platformo="$object/fixed-head.o $object/$platform.o"
- binary=y
- ;;
---- a/arch/powerpc/platforms/83xx/Kconfig
-+++ b/arch/powerpc/platforms/83xx/Kconfig
-@@ -38,6 +38,15 @@ config MPC832x_RDB
- help
- This option enables support for the MPC8323 RDB board.
-
-+config RB_PPC
-+ bool "MikroTik RouterBOARD 333/600 series"
-+ select DEFAULT_UIMAGE
-+ select QUICC_ENGINE
-+ select PPC_MPC832x
-+ select PPC_MPC834x
-+ help
-+ This option enables support for MikroTik RouterBOARD 333/600 series boards.
-+
- config MPC834x_MDS
- bool "Freescale MPC834x MDS"
- select DEFAULT_UIMAGE
---- /dev/null
-+++ b/arch/powerpc/boot/dts/rb333.dts
-@@ -0,0 +1,426 @@
-+
-+/*
-+ * RouterBOARD 333 series Device Tree Source
-+ *
-+ * Copyright 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ * Copyright 2009 Michael Guntsche <mike@it-loops.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * Warning (reg_format): "reg" property in /qe@e0100000/muram@10000/data-only@0 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
-+ * Warning (ranges_format): "ranges" property in /qe@e0100000/muram@10000 has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1)
-+ * Warning (avoid_default_addr_size): Relying on default #address-cells value for /qe@e0100000/muram@10000/data-only@0
-+ * Warning (avoid_default_addr_size): Relying on default #size-cells value for /qe@e0100000/muram@10000/data-only@0
-+ * Warning (obsolete_chosen_interrupt_controller): /chosen has obsolete "interrupt-controller" property
-+ *
-+ */
-+
-+
-+/dts-v1/;
-+
-+/ {
-+ model = "RB333";
-+ compatible = "MPC83xx";
-+ #size-cells = <1>;
-+ #address-cells = <1>;
-+
-+ aliases {
-+ ethernet0 = &enet0;
-+ ethernet1 = &enet1;
-+ ethernet2 = &enet2;
-+ pci0 = &pci0;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 board=mpc8323 rootfstype=squashfs,yaffs2,jffs2 root=/dev/mtdblock1 boot=1";
-+ // linux,platform = <0x8062>;
-+ // linux,initrd = <0x488000 0x0>;
-+ linux,stdout-path = "/soc8323@e0000000/serial@4500";
-+ // interrupt-controller = <&ipic>;
-+ };
-+
-+ cpus {
-+ #cpus = <1>;
-+ #size-cells = <0>;
-+ #address-cells = <1>;
-+
-+ PowerPC,8323E@0 {
-+ device_type = "cpu";
-+ reg = <0x0>;
-+ i-cache-size = <0x4000>;
-+ d-cache-size = <0x4000>;
-+ i-cache-line-size = <0x20>;
-+ d-cache-line-size = <0x20>;
-+ // clock-frequency = <0x13de3650>;
-+ // timebase-frequency = <0x1fc9f08>;
-+ timebase-frequency = <0x0000000>; // filled by the bootwrapper from the firmware blob
-+ clock-frequency = <0x00000000>; // filled by the bootwrapper from the firmware blob
-+ 32-bit;
-+ };
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x0 0x4000000>;
-+ // reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
-+ };
-+
-+ flash {
-+ reg = <0xfe000000 0x20000>;
-+ };
-+
-+ nand {
-+ ale = <&gpio2 0x3>;
-+ cle = <&gpio2 0x2>;
-+ nce = <&gpio2 0x1>;
-+ rdy = <&gpio2 0x0>;
-+ reg = <0xf8000000 0x1000>;
-+ device_type = "rb,nand";
-+ };
-+
-+ nnand {
-+ reg = <0xf0000000 0x1000>;
-+ };
-+
-+ voltage {
-+ voltage_gpio = <&gpio3 0x11>;
-+ };
-+
-+ fancon {
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x14 0x8>;
-+ fan_on = <&gpio0 0x10>;
-+ };
-+
-+ soc8323@e0000000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ device_type = "soc";
-+ compatible = "simple-bus";
-+ ranges = <0x0 0xe0000000 0x00100000>;
-+ reg = <0xe0000000 0x00000200>;
-+ bus-frequency = <1>;
-+
-+ wdt@200 {
-+ device_type = "watchdog";
-+ compatible = "mpc83xx_wdt";
-+ reg = <0x200 0x100>;
-+ };
-+
-+ ipic:pic@700 {
-+ interrupt-controller;
-+ #address-cells = <0>;
-+ #interrupt-cells = <2>;
-+ reg = <0x700 0x100>;
-+ device_type = "ipic";
-+ };
-+
-+ par_io@1400 {
-+ num-ports = <4>;
-+ device_type = "par_io";
-+ reg = <0x1400 0x100>;
-+
-+ ucc2pio: ucc_pin@02 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 3 4 3 0 2 0
-+ 3 5 1 0 2 0
-+ 0 18 1 0 1 0
-+ 0 19 1 0 1 0
-+ 0 20 1 0 1 0
-+ 0 21 1 0 1 0
-+ 0 30 1 0 1 0
-+ 3 6 2 0 1 0
-+ 0 29 2 0 1 0
-+ 0 31 2 0 1 0
-+ 0 22 2 0 1 0
-+ 0 23 2 0 1 0
-+ 0 24 2 0 1 0
-+ 0 25 2 0 1 0
-+ 0 28 2 0 1 0
-+ 0 26 2 0 1 0
-+ 3 31 2 0 1 0>;
-+ };
-+
-+ ucc3pio: ucc_pin@03 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 1 0 1 0 1 0
-+ 1 1 1 0 1 0
-+ 1 2 1 0 1 0
-+ 1 3 1 0 1 0
-+ 1 12 1 0 1 0
-+ 3 24 2 0 1 0
-+ 1 11 2 0 1 0
-+ 1 13 2 0 1 0
-+ 1 4 2 0 1 0
-+ 1 5 2 0 1 0
-+ 1 6 2 0 1 0
-+ 1 7 2 0 1 0
-+ 1 10 2 0 1 0
-+ 1 8 2 0 1 0
-+ 3 29 2 0 1 0>;
-+ };
-+
-+ ucc4pio: ucc_pin@04 {
-+ pio-map = <
-+ /* port pin dir open_drain assignment has_irq */
-+ 1 18 1 0 1 0
-+ 1 19 1 0 1 0
-+ 1 20 1 0 1 0
-+ 1 21 1 0 1 0
-+ 1 30 1 0 1 0
-+ 3 20 2 0 1 0
-+ 1 30 2 0 1 0
-+ 1 31 2 0 1 0
-+ 1 22 2 0 1 0
-+ 1 23 2 0 1 0
-+ 1 24 2 0 1 0
-+ 1 25 2 0 1 0
-+ 1 28 2 0 1 0
-+ 1 26 2 0 1 0
-+ 3 21 2 0 1 0>;
-+ };
-+ };
-+
-+ serial0: serial@4500 {
-+ cell-index = <0>;
-+ device_type = "serial";
-+ compatible = "fsl,ns16550", "ns16550";
-+ reg = <0x4500 0x100>;
-+ clock-frequency = <0x7f27c20>;
-+ interrupts = <9 0x8>;
-+ interrupt-parent = <&ipic>;
-+ };
-+
-+ dma@82a8 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
-+ reg = <0x82a8 4>;
-+ ranges = <0 0x8100 0x1a8>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ cell-index = <0>;
-+ dma-channel@0 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0 0x80>;
-+ cell-index = <0>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@80 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x80 0x80>;
-+ cell-index = <1>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@100 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x100 0x80>;
-+ cell-index = <2>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ dma-channel@180 {
-+ compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-+ reg = <0x180 0x28>;
-+ cell-index = <3>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <71 8>;
-+ };
-+ };
-+
-+ beeper {
-+ gpio = <&gpio3 0x12>;
-+ reg = <0x500 0x100>;
-+ interrupt-parent = <&ipic>;
-+ interrupts = <0x48 0x8>;
-+ };
-+
-+ gpio3: gpio@3 {
-+ reg = <0x144c 0x4>;
-+ device-id = <0x3>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+
-+ gpio2: gpio@2 {
-+ reg = <0x1434 0x4>;
-+ device-id = <0x2>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+
-+ gpio0: gpio@0 {
-+ reg = <0x1404 0x4>;
-+ device-id = <0x0>;
-+ compatible = "qe_gpio";
-+ device_type = "gpio";
-+ };
-+ };
-+
-+ pci0: pci@e0008500 {
-+ device_type = "pci";
-+ // compatible = "83xx";
-+ compatible = "fsl,mpc8349-pci";
-+ reg = <0xe0008500 0x100 0xe0008300 0x8>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ // clock-frequency = <0>;
-+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
-+ bus-range = <0x0 0x0>;
-+ interrupt-map = <
-+ /* IDSEL 0x10 AD16 miniPCI slot 0 */
-+ 0x8000 0x0 0x0 0x1 &ipic 0x11 0x8
-+ 0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
-+
-+ /* IDSEL 0x11 AD17 miniPCI slot 1 */
-+ 0x8800 0x0 0x0 0x1 &ipic 0x12 0x8
-+ 0x8800 0x0 0x0 0x2 &ipic 0x13 0x8
-+
-+ /* IDSEL 0x12 AD18 miniPCI slot 2 */
-+ 0x9000 0x0 0x0 0x1 &ipic 0x13 0x8
-+ 0x9000 0x0 0x0 0x2 &ipic 0x11 0x8>;
-+
-+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-+ interrupt-parent = <&ipic>;
-+ // interrupts = <66 0x8>;
-+ };
-+
-+ qe@e0100000 {
-+ reg = <0xe0100000 0x480>;
-+ ranges = <0x0 0xe0100000 0x100000>;
-+ model = "QE";
-+ device_type = "qe";
-+ compatible = "fsl,qe";
-+ #size-cells = <1>;
-+ #address-cells = <1>;
-+ brg-frequency = <0>;
-+ bus-frequency = <0>;
-+ // bus-frequency = <198000000>;
-+ fsl,qe-num-riscs = <1>;
-+ fsl,qe-num-snums = <28>;
-+
-+ qeic: qeic@80 {
-+ interrupt-controller;
-+ compatible = "fsl,qe-ic";
-+ big-endian;
-+ built-in;
-+ reg = <0x80 0x80>;
-+ #interrupt-cells = <1>;
-+ #address-cells = <0>;
-+ device_type = "qeic";
-+ interrupts = <0x20 0x8 0x21 0x8>;
-+ interrupt-parent = <&ipic>;
-+ };
-+
-+ mdio@2120 {
-+ compatible = "ucc_geth_phy";
-+ device_type = "mdio";
-+ reg = <0x3120 0x18>;
-+ #size-cells = <0>;
-+ #address-cells = <1>;
-+
-+ phy3: ethernet-phy@03 {
-+ // interface = <0x3>;
-+ device_type = "ethernet-phy";
-+ reg = <0x3>;
-+ };
-+
-+ phy2: ethernet-phy@02 {
-+ // interface = <0x3>;
-+ device_type = "ethernet-phy";
-+ reg = <0x2>;
-+ };
-+
-+ phy1: ethernet-phy@01 {
-+ // interface = <0x3>;
-+ device_type = "ethernet-phy";
-+ reg = <0x1>;
-+ };
-+ };
-+
-+ enet0: ucc@2200 {
-+ tx-clock = <0x1a>;
-+ rx-clock = <0x1f>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x22>;
-+ reg = <0x2200 0x200>;
-+ device-id = <0x3>;
-+ model = "UCC";
-+ compatible = "ucc_geth";
-+ device_type = "network";
-+ phy-handle = <&phy2>;
-+ pio-handle = <&ucc3pio>;
-+ };
-+
-+ enet1: ucc@3200 {
-+ tx-clock = <0x22>;
-+ rx-clock = <0x20>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x23>;
-+ reg = <0x3200 0x200>;
-+ device-id = <0x4>;
-+ model = "UCC";
-+ compatible = "ucc_geth";
-+ device_type = "network";
-+ phy-handle = <&phy3>;
-+ pio-handle = <&ucc4pio>;
-+ };
-+
-+ enet2: ucc@3000 {
-+ tx-clock = <0x18>;
-+ rx-clock = <0x17>;
-+ local-mac-address = [00 00 00 00 00 00];
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x21>;
-+ reg = <0x3000 0x200>;
-+ device-id = <0x2>;
-+ model = "UCC";
-+ compatible = "ucc_geth";
-+ device_type = "network";
-+ phy-handle = <&phy1>;
-+ pio-handle = <&ucc2pio>;
-+ };
-+
-+ spi@500 {
-+ mode = "cpu";
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x1>;
-+ reg = <0x500 0x40>;
-+ compatible = "fsl,spi";
-+ device_type = "spi";
-+ };
-+
-+ spi@4c0 {
-+ mode = "cpu";
-+ interrupt-parent = <&qeic>;
-+ interrupts = <0x2>;
-+ reg = <0x4c0 0x40>;
-+ compatible = "fsl,spi";
-+ device_type = "spi";
-+ };
-+
-+ muram@10000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
-+ ranges = <0x0 0x10000 0x4000>;
-+ device_type = "muram";
-+
-+ data-only@0 {
-+ compatible = "fsl,qe-muram-data",
-+ "fsl,cpm-muram-data";
-+ reg = <0x0 0x4000>;
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/powerpc/boot/rb333.c
-@@ -0,0 +1,86 @@
-+/*
-+ * The RouterBOARD platform -- for booting RB333 RouterBOARDs.
-+ *
-+ * Author: Alexandros C. Couloumbis <alex@ozo.com>
-+ * Author: Michael Guntsche <mike@it-loops.com>
-+ *
-+ * Copyright (c) 2010 Alexandros C. Couloumbis
-+ * Copyright (c) 2009 Michael Guntsche
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include "ops.h"
-+#include "types.h"
-+#include "io.h"
-+#include "stdio.h"
-+#include <libfdt.h>
-+
-+BSS_STACK(4*1024);
-+
-+u64 memsize64;
-+const void *fw_dtb;
-+
-+static void rb333_fixups(void)
-+{
-+ const u32 *reg, *timebase, *clock;
-+ int node, size;
-+ void *chosen;
-+ const char* bootargs;
-+
-+ dt_fixup_memory(0, memsize64);
-+
-+ /* Find the CPU timebase and clock frequencies. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "cpu", sizeof("cpu"));
-+ timebase = fdt_getprop(fw_dtb, node, "timebase-frequency", &size);
-+ clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
-+ dt_fixup_cpu_clocks(*clock, *timebase, 0);
-+
-+ /* Set the MAC addresses. */
-+ node = fdt_path_offset(fw_dtb, "/qe@e0100000/ucc@2200");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet0", (const u8 *)reg);
-+
-+ node = fdt_path_offset(fw_dtb, "/qe@e0100000/ucc@3200");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet1", (const u8 *)reg);
-+
-+ node = fdt_path_offset(fw_dtb, "/qe@e0100000/ucc@3000");
-+ reg = fdt_getprop(fw_dtb, node, "mac-address", &size);
-+ dt_fixup_mac_address_by_alias("ethernet2", (const u8 *)reg);
-+
-+ /* Fixup chosen
-+ * The bootloader reads the kernelparm segment and adds the content to
-+ * bootargs. This is needed to specify root and other boot flags.
-+ */
-+ chosen = finddevice("/chosen");
-+ node = fdt_path_offset(fw_dtb, "/chosen");
-+ bootargs = fdt_getprop(fw_dtb, node, "bootargs", &size);
-+ setprop_str(chosen, "bootargs", bootargs);
-+}
-+
-+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-+ unsigned long r6, unsigned long r7)
-+{
-+ const u32 *reg;
-+ int node, size;
-+
-+ fw_dtb = (const void *)r3;
-+
-+ /* Find the memory range. */
-+ node = fdt_node_offset_by_prop_value(fw_dtb, -1, "device_type", "memory", sizeof("memory"));
-+ reg = fdt_getprop(fw_dtb, node, "reg", &size);
-+ memsize64 = reg[1];
-+
-+ /* Now we have the memory size; initialize the heap. */
-+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
-+
-+ /* Prepare the device tree and find the console. */
-+ fdt_init(_dtb_start);
-+ serial_console_init();
-+
-+ /* Remaining fixups... */
-+ platform_ops.fixups = rb333_fixups;
-+}
---- /dev/null
-+++ b/arch/powerpc/platforms/83xx/rbppc.c
-@@ -0,0 +1,388 @@
-+/*
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/root_dev.h>
-+#include <linux/initrd.h>
-+#include <linux/interrupt.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_device.h>
-+#include <linux/of_platform.h>
-+#include <linux/pci.h>
-+#include <asm/time.h>
-+#include <asm/ipic.h>
-+#include <asm/udbg.h>
-+#include <asm/qe.h>
-+#include <asm/qe_ic.h>
-+#include <sysdev/fsl_soc.h>
-+#include <sysdev/fsl_pci.h>
-+#include "mpc83xx.h"
-+
-+#define SYSCTL 0x100
-+#define SICRL 0x014
-+
-+#define GTCFR2 0x04
-+#define GTMDR4 0x22
-+#define GTRFR4 0x26
-+#define GTCNR4 0x2e
-+#define GTVER4 0x36
-+#define GTPSR4 0x3e
-+
-+#define GTCFR_BCM 0x40
-+#define GTCFR_STP4 0x20
-+#define GTCFR_RST4 0x10
-+#define GTCFR_STP3 0x02
-+#define GTCFR_RST3 0x01
-+
-+#define GTMDR_ORI 0x10
-+#define GTMDR_FRR 0x08
-+#define GTMDR_ICLK16 0x04
-+
-+extern int par_io_data_set(u8 port, u8 pin, u8 val);
-+extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-+ int assignment, int has_irq);
-+
-+static unsigned timer_freq;
-+static void *gtm;
-+
-+static int beeper_irq;
-+static unsigned beeper_gpio_pin[2];
-+
-+int rb333model = 0;
-+
-+irqreturn_t rbppc_timer_irq(int irq, void *ptr)
-+{
-+ static int toggle = 0;
-+
-+ par_io_data_set(beeper_gpio_pin[0], beeper_gpio_pin[1], toggle);
-+ toggle = !toggle;
-+
-+ /* ack interrupt */
-+ out_be16(gtm + GTVER4, 3);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+void rbppc_beep(unsigned freq)
-+{
-+ unsigned gtmdr;
-+
-+ if (freq > 5000) freq = 5000;
-+
-+ if (!gtm)
-+ return;
-+ if (!freq) {
-+ out_8(gtm + GTCFR2, GTCFR_STP4 | GTCFR_STP3);
-+ return;
-+ }
-+
-+ out_8(gtm + GTCFR2, GTCFR_RST4 | GTCFR_STP3);
-+ out_be16(gtm + GTPSR4, 255);
-+ gtmdr = GTMDR_FRR | GTMDR_ICLK16;
-+ if (beeper_irq != NO_IRQ) gtmdr |= GTMDR_ORI;
-+ out_be16(gtm + GTMDR4, gtmdr);
-+ out_be16(gtm + GTVER4, 3);
-+
-+ out_be16(gtm + GTRFR4, timer_freq / 16 / 256 / freq / 2);
-+ out_be16(gtm + GTCNR4, 0);
-+}
-+EXPORT_SYMBOL(rbppc_beep);
-+
-+static void __init rbppc_setup_arch(void)
-+{
-+ struct device_node *np;
-+
-+ np = of_find_node_by_type(NULL, "cpu");
-+ if (np) {
-+ const unsigned *fp = of_get_property(np, "clock-frequency", NULL);
-+ loops_per_jiffy = fp ? *fp / HZ : 0;
-+
-+ of_node_put(np);
-+ }
-+
-+ np = of_find_node_by_name(NULL, "serial");
-+ if (np) {
-+ timer_freq =
-+ *(unsigned *) of_get_property(np, "clock-frequency", NULL);
-+ of_node_put(np);
-+ }
-+
-+#ifdef CONFIG_PCI
-+ np = of_find_node_by_type(NULL, "pci");
-+ if (np) {
-+ mpc83xx_add_bridge(np);
-+ }
-+#endif
-+
-+if (rb333model) {
-+
-+#ifdef CONFIG_QUICC_ENGINE
-+ qe_reset();
-+
-+ if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
-+ par_io_init(np);
-+ of_node_put(np);
-+
-+ for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
-+ par_io_of_config(np);
-+ }
-+#endif
-+
-+} /* RB333 */
-+
-+}
-+
-+void __init rbppc_init_IRQ(void)
-+{
-+ struct device_node *np;
-+
-+ np = of_find_node_by_type(NULL, "ipic");
-+ if (np) {
-+ ipic_init(np, 0);
-+ ipic_set_default_priority();
-+ of_node_put(np);
-+ }
-+
-+if (rb333model) {
-+
-+#ifdef CONFIG_QUICC_ENGINE
-+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-+ if (!np) {
-+ np = of_find_node_by_type(NULL, "qeic");
-+ if (!np)
-+ return;
-+ }
-+ qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-+ of_node_put(np);
-+#endif /* CONFIG_QUICC_ENGINE */
-+
-+} /* RB333 */
-+
-+}
-+
-+static int __init rbppc_probe(void)
-+{
-+ char *model;
-+
-+ model = of_get_flat_dt_prop(of_get_flat_dt_root(), "model", NULL);
-+
-+ if (!model)
-+ return 0;
-+
-+ if (strcmp(model, "RB333") == 0) {
-+ rb333model = 1;
-+ return 1;
-+ }
-+
-+ if (strcmp(model, "RB600") == 0)
-+ return 1;
-+
-+ return 0;
-+}
-+
-+static void __init rbppc_beeper_init(struct device_node *beeper)
-+{
-+ struct resource res;
-+ struct device_node *gpio;
-+ const unsigned *pin;
-+ const unsigned *gpio_id;
-+
-+ if (of_address_to_resource(beeper, 0, &res)) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: No region specified\n", beeper->full_name);
-+ return;
-+ }
-+
-+ pin = of_get_property(beeper, "gpio", NULL);
-+ if (pin) {
-+ gpio = of_find_node_by_phandle(pin[0]);
-+
-+ if (!gpio) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: GPIO handle %x not found\n", beeper->full_name, pin[0]);
-+ return;
-+ }
-+
-+ gpio_id = of_get_property(gpio, "device-id", NULL);
-+ if (!gpio_id) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Beeper error: No device-id specified in GPIO\n", beeper->full_name);
-+ return;
-+ }
-+
-+ beeper_gpio_pin[0] = *gpio_id;
-+ beeper_gpio_pin[1] = pin[1];
-+
-+ par_io_config_pin(*gpio_id, pin[1], 1, 0, 0, 0);
-+ } else {
-+ void *sysctl;
-+
-+ sysctl = ioremap_nocache(get_immrbase() + SYSCTL, 0x100);
-+ out_be32(sysctl + SICRL,
-+ in_be32(sysctl + SICRL) | (1 << (31 - 19)));
-+ iounmap(sysctl);
-+ }
-+
-+ gtm = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ beeper_irq = irq_of_parse_and_map(beeper, 0);
-+ if (beeper_irq != NO_IRQ) {
-+ int e = request_irq(beeper_irq, rbppc_timer_irq, 0, "beeper", NULL);
-+ if (e) {
-+ printk(KERN_ERR "rbppc_beeper_init(%s): Request of beeper irq failed!\n", beeper->full_name);
-+ }
-+ }
-+}
-+
-+#define SBIT(x) (0x80000000 >> (x))
-+#define DBIT(x, y) ((y) << (32 - (((x % 16) + 1) * 2)))
-+
-+#define GPIO_DIR_RB333(x) ((x) + (0x1408 >> 2))
-+#define GPIO_DATA_RB333(x) ((x) + (0x1404 >> 2))
-+
-+#define SICRL_RB600(x) ((x) + (0x114 >> 2))
-+#define GPIO_DIR_RB600(x) ((x) + (0xc00 >> 2))
-+#define GPIO_DATA_RB600(x) ((x) + (0xc08 >> 2))
-+
-+static void rbppc_restart(char *cmd)
-+{
-+ __be32 __iomem *reg;
-+ unsigned rb_model;
-+ struct device_node *root;
-+ unsigned int size;
-+
-+ root = of_find_node_by_path("/");
-+ if (root) {
-+ const char *prop = (char *) of_get_property(root, "model", &size);
-+ rb_model = prop[sizeof("RB") - 1] - '0';
-+ of_node_put(root);
-+ switch (rb_model) {
-+ case 3:
-+ reg = ioremap(get_immrbase(), 0x2000);
-+ local_irq_disable();
-+ out_be32(GPIO_DIR_RB333(reg),
-+ (in_be32(GPIO_DIR_RB333(reg)) & ~DBIT(4, 3)) | DBIT(4, 1));
-+ out_be32(GPIO_DATA_RB333(reg), in_be32(GPIO_DATA_RB333(reg)) & ~SBIT(4));
-+ break;
-+ case 6:
-+ reg = ioremap(get_immrbase(), 0x1000);
-+ local_irq_disable();
-+ out_be32(SICRL_RB600(reg), in_be32(SICRL_RB600(reg)) & ~0x00800000);
-+ out_be32(GPIO_DIR_RB600(reg), in_be32(GPIO_DIR_RB600(reg)) | SBIT(2));
-+ out_be32(GPIO_DATA_RB600(reg), in_be32(GPIO_DATA_RB600(reg)) & ~SBIT(2));
-+ break;
-+ default:
-+ mpc83xx_restart(cmd);
-+ break;
-+ }
-+ }
-+ else mpc83xx_restart(cmd);
-+
-+ for (;;) ;
-+}
-+
-+static void rbppc_halt(void)
-+{
-+ while (1);
-+}
-+
-+static struct of_device_id rbppc_ids[] = {
-+ { .type = "soc", },
-+ { .compatible = "soc", },
-+ { .compatible = "simple-bus", },
-+ { .type = "qe", },
-+ { .compatible = "fsl,qe", },
-+ { .compatible = "gianfar", },
-+ { },
-+};
-+
-+static int __init rbppc_declare_of_platform_devices(void)
-+{
-+ struct device_node *np;
-+ unsigned idx;
-+
-+ of_platform_bus_probe(NULL, rbppc_ids, NULL);
-+
-+ np = of_find_node_by_type(NULL, "mdio");
-+ if (np) {
-+ unsigned len;
-+ unsigned *res;
-+ const unsigned *eres;
-+ struct device_node *ep;
-+
-+ ep = of_find_compatible_node(NULL, "network", "ucc_geth");
-+ if (ep) {
-+ eres = of_get_property(ep, "reg", &len);
-+ res = (unsigned *) of_get_property(np, "reg", &len);
-+ if (res && eres) {
-+ res[0] = eres[0] + 0x120;
-+ }
-+ }
-+ }
-+
-+ np = of_find_node_by_name(NULL, "nand");
-+ if (np) {
-+ of_platform_device_create(np, "nand", NULL);
-+ }
-+
-+ idx = 0;
-+ for_each_node_by_type(np, "rb,cf") {
-+ char dev_name[12];
-+ snprintf(dev_name, sizeof(dev_name), "cf.%u", idx);
-+ of_platform_device_create(np, dev_name, NULL);
-+ ++idx;
-+ }
-+
-+ np = of_find_node_by_name(NULL, "beeper");
-+ if (np) {
-+ rbppc_beeper_init(np);
-+ }
-+
-+ return 0;
-+}
-+machine_device_initcall(rb600, rbppc_declare_of_platform_devices);
-+
-+define_machine(rb600) {
-+ .name = "MikroTik RouterBOARD 333/600 series",
-+ .probe = rbppc_probe,
-+ .setup_arch = rbppc_setup_arch,
-+ .init_IRQ = rbppc_init_IRQ,
-+ .get_irq = ipic_get_irq,
-+ .restart = rbppc_restart,
-+ .halt = rbppc_halt,
-+ .time_init = mpc83xx_time_init,
-+ .calibrate_decr = generic_calibrate_decr,
-+};
-+
-+static void fixup_pcibridge(struct pci_dev *dev)
-+{
-+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
-+ /* let the kernel itself set right memory windows */
-+ pci_write_config_word(dev, PCI_MEMORY_BASE, 0);
-+ pci_write_config_word(dev, PCI_MEMORY_LIMIT, 0);
-+ pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0);
-+ pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
-+ pci_write_config_byte(dev, PCI_IO_BASE, 0);
-+ pci_write_config_byte(dev, PCI_IO_LIMIT, 4 << 4);
-+
-+ pci_write_config_byte(
-+ dev, PCI_COMMAND,
-+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
-+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
-+ }
-+}
-+
-+
-+static void fixup_rb604(struct pci_dev *dev)
-+{
-+ pci_write_config_byte(dev, 0xC0, 0x01);
-+}
-+
-+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_pcibridge)
-+DECLARE_PCI_FIXUP_HEADER(0x3388, 0x0021, fixup_rb604)
+++ /dev/null
---- a/arch/powerpc/kernel/Makefile
-+++ b/arch/powerpc/kernel/Makefile
-@@ -118,9 +118,11 @@ obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.
-
- obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
-
-+ifneq ($(CONFIG_RB_IOMAP),y)
- ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
- obj-y += iomap.o
- endif
-+endif
-
- obj-$(CONFIG_PPC64) += $(obj64-y)
- obj-$(CONFIG_PPC32) += $(obj32-y)
---- a/arch/powerpc/platforms/83xx/Makefile
-+++ b/arch/powerpc/platforms/83xx/Makefile
-@@ -7,6 +7,7 @@ obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mp
- obj-$(CONFIG_MPC830x_RDB) += mpc830x_rdb.o
- obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o
- obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o
-+obj-$(CONFIG_RB_PPC) += rbppc.o
- obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
- obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
- obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o
---- a/arch/powerpc/platforms/Kconfig
-+++ b/arch/powerpc/platforms/Kconfig
-@@ -192,6 +192,10 @@ config PPC_INDIRECT_MMIO
- config PPC_IO_WORKAROUNDS
- bool
-
-+config RB_IOMAP
-+ bool
-+ default y if RB_PPC
-+
- source "drivers/cpufreq/Kconfig"
-
- menu "CPU Frequency drivers"
---- a/arch/powerpc/sysdev/Makefile
-+++ b/arch/powerpc/sysdev/Makefile
-@@ -69,3 +69,6 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -
- obj-$(CONFIG_PPC_XICS) += xics/
-
- obj-$(CONFIG_GE_FPGA) += ge/
-+
-+obj-$(CONFIG_RB_IOMAP) += rb_iomap.o
-+
---- /dev/null
-+++ b/arch/powerpc/sysdev/rb_iomap.c
-@@ -0,0 +1,204 @@
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+#include <linux/mm.h>
-+#include <asm/io.h>
-+
-+#define LOCALBUS_START 0x40000000
-+#define LOCALBUS_MASK 0x007fffff
-+#define LOCALBUS_REGMASK 0x001fffff
-+
-+static void __iomem *localbus_base;
-+
-+static inline int is_localbus(void __iomem *addr)
-+{
-+ return ((unsigned) addr & ~LOCALBUS_MASK) == LOCALBUS_START;
-+}
-+
-+static inline unsigned localbus_regoff(unsigned reg) {
-+ return (reg << 16) | (((reg ^ 8) & 8) << 17);
-+}
-+
-+static inline void __iomem *localbus_addr(void __iomem *addr)
-+{
-+ return localbus_base
-+ + ((unsigned) addr & LOCALBUS_MASK & ~LOCALBUS_REGMASK)
-+ + localbus_regoff((unsigned) addr & LOCALBUS_REGMASK);
-+}
-+
-+unsigned int ioread8(void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ return in_be16(localbus_addr(addr)) >> 8;
-+ return readb(addr);
-+}
-+EXPORT_SYMBOL(ioread8);
-+
-+unsigned int ioread16(void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ return le16_to_cpu(in_be16(localbus_addr(addr)));
-+ return readw(addr);
-+}
-+EXPORT_SYMBOL(ioread16);
-+
-+unsigned int ioread16be(void __iomem *addr)
-+{
-+ return in_be16(addr);
-+}
-+EXPORT_SYMBOL(ioread16be);
-+
-+unsigned int ioread32(void __iomem *addr)
-+{
-+ return readl(addr);
-+}
-+EXPORT_SYMBOL(ioread32);
-+
-+unsigned int ioread32be(void __iomem *addr)
-+{
-+ return in_be32(addr);
-+}
-+EXPORT_SYMBOL(ioread32be);
-+
-+void iowrite8(u8 val, void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ out_be16(localbus_addr(addr), ((u16) val) << 8);
-+ else
-+ writeb(val, addr);
-+}
-+EXPORT_SYMBOL(iowrite8);
-+
-+void iowrite16(u16 val, void __iomem *addr)
-+{
-+ if (is_localbus(addr))
-+ out_be16(localbus_addr(addr), cpu_to_le16(val));
-+ else
-+ writew(val, addr);
-+}
-+EXPORT_SYMBOL(iowrite16);
-+
-+void iowrite16be(u16 val, void __iomem *addr)
-+{
-+ out_be16(addr, val);
-+}
-+EXPORT_SYMBOL(iowrite16be);
-+
-+void iowrite32(u32 val, void __iomem *addr)
-+{
-+ writel(val, addr);
-+}
-+EXPORT_SYMBOL(iowrite32);
-+
-+void iowrite32be(u32 val, void __iomem *addr)
-+{
-+ out_be32(addr, val);
-+}
-+EXPORT_SYMBOL(iowrite32be);
-+
-+void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ u8 *buf = dst;
-+
-+ for (i = 0; i < count; ++i) {
-+ *buf++ = in_be16(laddr) >> 8;
-+ }
-+ } else {
-+ _insb((u8 __iomem *) addr, dst, count);
-+ }
-+}
-+EXPORT_SYMBOL(ioread8_rep);
-+
-+void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ u16 *buf = dst;
-+
-+ for (i = 0; i < count; ++i) {
-+ *buf++ = in_be16(laddr);
-+ }
-+ } else {
-+ _insw_ns((u16 __iomem *) addr, dst, count);
-+ }
-+}
-+EXPORT_SYMBOL(ioread16_rep);
-+
-+void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
-+{
-+ _insl_ns((u32 __iomem *) addr, dst, count);
-+}
-+EXPORT_SYMBOL(ioread32_rep);
-+
-+void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ const u8 *buf = src;
-+
-+ for (i = 0; i < count; ++i) {
-+ out_be16(laddr, ((u16) *buf++) << 8);
-+ }
-+ } else {
-+ _outsb((u8 __iomem *) addr, src, count);
-+ }
-+}
-+EXPORT_SYMBOL(iowrite8_rep);
-+
-+void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
-+{
-+ if (is_localbus(addr)) {
-+ unsigned i;
-+ void *laddr = localbus_addr(addr);
-+ const u16 *buf = src;
-+
-+ for (i = 0; i < count; ++i) {
-+ out_be16(laddr, *buf++);
-+ }
-+ } else {
-+ _outsw_ns((u16 __iomem *) addr, src, count);
-+ }
-+}
-+EXPORT_SYMBOL(iowrite16_rep);
-+
-+void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
-+{
-+ _outsl_ns((u32 __iomem *) addr, src, count);
-+}
-+EXPORT_SYMBOL(iowrite32_rep);
-+
-+void __iomem *ioport_map(unsigned long port, unsigned int len)
-+{
-+ return (void __iomem *) (port + _IO_BASE);
-+}
-+EXPORT_SYMBOL(ioport_unmap);
-+
-+void ioport_unmap(void __iomem *addr)
-+{
-+ /* Nothing to do */
-+}
-+EXPORT_SYMBOL(ioport_map);
-+
-+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-+{
-+ /* Nothing to do */
-+}
-+EXPORT_SYMBOL(pci_iounmap);
-+
-+void __iomem *localbus_map(unsigned long addr, unsigned int len)
-+{
-+ if (!localbus_base)
-+ localbus_base = ioremap(addr & ~LOCALBUS_MASK,
-+ LOCALBUS_MASK + 1);
-+ return (void *) (LOCALBUS_START + (addr & LOCALBUS_MASK));
-+}
-+EXPORT_SYMBOL(localbus_map);
-+
-+void localbus_unmap(void __iomem *addr)
-+{
-+}
-+EXPORT_SYMBOL(localbus_unmap);
---- a/arch/powerpc/platforms/83xx/Kconfig
-+++ b/arch/powerpc/platforms/83xx/Kconfig
-@@ -44,6 +44,7 @@ config RB_PPC
- select QUICC_ENGINE
- select PPC_MPC832x
- select PPC_MPC834x
-+ select RB_IOMAP
- help
- This option enables support for MikroTik RouterBOARD 333/600 series boards.
-
+++ /dev/null
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -916,5 +916,12 @@ config PATA_LEGACY
-
- If unsure, say N.
-
-+config PATA_RB_PPC
-+ tristate "MikroTik RB600 PATA support"
-+ depends on RB_PPC
-+ help
-+ This option enables support for PATA devices on MikroTik RouterBOARD
-+ 600 series boards.
-+
- endif # ATA_SFF
- endif # ATA
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -91,6 +91,7 @@ obj-$(CONFIG_PATA_PALMLD) += pata_palmld
- obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
- obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
-+obj-$(CONFIG_PATA_RB_PPC) += pata_rbppc_cf.o
- obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
- obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
-
---- /dev/null
-+++ b/drivers/ata/pata_rbppc_cf.c
-@@ -0,0 +1,699 @@
-+/*
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <scsi/scsi_host.h>
-+#include <linux/libata.h>
-+#include <linux/of_platform.h>
-+#include <linux/ata_platform.h>
-+#include <linux/slab.h>
-+
-+#define DEBUG_UPM 0
-+
-+#define DRV_NAME "pata_rbppc_cf"
-+#define DRV_VERSION "0.0.2"
-+
-+#define DEV2SEL_OFFSET 0x00100000
-+
-+#define IMMR_LBCFG_OFFSET 0x00005000
-+#define IMMR_LBCFG_SIZE 0x00001000
-+
-+#define LOCAL_BUS_MCMR 0x00000078
-+#define MxMR_OP_MASK 0x30000000
-+#define MxMR_OP_NORMAL 0x00000000
-+#define MxMR_OP_WRITE 0x10000000
-+#define MxMR_OP_READ 0x20000000
-+#define MxMR_OP_RUN 0x30000000
-+#define MxMR_LUPWAIT_LOW 0x08000000
-+#define MxMR_LUPWAIT_HIGH 0x00000000
-+#define MxMR_LUPWAIT_ENABLE 0x00040000
-+#define MxMR_RLF_MASK 0x0003c000
-+#define MxMR_RLF_SHIFT 14
-+#define MxMR_WLF_MASK 0x00003c00
-+#define MxMR_WLF_SHIFT 10
-+#define MxMR_MAD_MASK 0x0000003f
-+#define LOCAL_BUS_MDR 0x00000088
-+#define LOCAL_BUS_LCRR 0x000000D4
-+#define LCRR_CLKDIV_MASK 0x0000000f
-+
-+#define LOOP_SIZE 4
-+
-+#define UPM_READ_SINGLE_OFFSET 0x00
-+#define UPM_WRITE_SINGLE_OFFSET 0x18
-+#define UPM_DATA_SIZE 0x40
-+
-+#define LBT_CPUIN_MIN 0
-+#define LBT_CPUOUT_MIN 1
-+#define LBT_CPUOUT_MAX 2
-+#define LBT_EXTDEL_MIN 3
-+#define LBT_EXTDEL_MAX 4
-+#define LBT_SIZE 5
-+
-+/* UPM machine configuration bits */
-+#define N_BASE 0x00f00000
-+#define N_CS 0xf0000000
-+#define N_CS_H1 0xc0000000
-+#define N_CS_H2 0x30000000
-+#define N_WE 0x0f000000
-+#define N_WE_H1 0x0c000000
-+#define N_WE_H2 0x03000000
-+#define N_OE 0x00030000
-+#define N_OE_H1 0x00020000
-+#define N_OE_H2 0x00010000
-+#define WAEN 0x00001000
-+#define REDO_2 0x00000100
-+#define REDO_3 0x00000200
-+#define REDO_4 0x00000300
-+#define LOOP 0x00000080
-+#define NA 0x00000008
-+#define UTA 0x00000004
-+#define LAST 0x00000001
-+
-+#define REDO_VAL(mult) (REDO_2 * ((mult) - 1))
-+#define REDO_MAX_MULT 4
-+
-+#define READ_BASE (N_BASE | N_WE)
-+#define WRITE_BASE (N_BASE | N_OE)
-+#define EMPTY (N_BASE | N_CS | N_OE | N_WE | LAST)
-+
-+#define EOF_UPM_SETTINGS 0
-+#define ANOTHER_TIMING 1
-+
-+#define OA_CPUIN_MIN 0x01
-+#define OA_CPUOUT_MAX 0x02
-+#define OD_CPUOUT_MIN 0x04
-+#define OA_CPUOUT_DELTA 0x06
-+#define OA_EXTDEL_MAX 0x08
-+#define OD_EXTDEL_MIN 0x10
-+#define OA_EXTDEL_DELTA 0x18
-+#define O_MIN_CYCLE_TIME 0x20
-+#define O_MINUS_PREV 0x40
-+#define O_HALF_CYCLE 0x80
-+
-+extern void __iomem *localbus_map(unsigned long addr, unsigned int len);
-+extern void localbus_unmap(void __iomem *addr);
-+
-+struct rbppc_cf_info {
-+ unsigned lbcfg_addr;
-+ unsigned clk_time_ps;
-+ int cur_mode;
-+ u32 lb_timings[LBT_SIZE];
-+};
-+static struct rbppc_cf_info *rbinfo = NULL;
-+
-+struct upm_setting {
-+ unsigned value;
-+ unsigned ns[7];
-+ unsigned clk_minus;
-+ unsigned group_size;
-+ unsigned options;
-+};
-+
-+static const struct upm_setting cfUpmReadSingle[] = {
-+ { READ_BASE | N_OE,
-+ /* t1 - ADDR setup time */
-+ { 70, 50, 30, 30, 25, 15, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { READ_BASE | N_OE_H1,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { READ_BASE,
-+ /* t2 - OE0 time */
-+ { 290, 290, 290, 80, 70, 65, 55 }, 0, 2, (OA_CPUOUT_MAX |
-+ OA_CPUIN_MIN) },
-+ { READ_BASE | WAEN,
-+ { 1, 1, 1, 1, 1, 0, 0 }, 0, 0, 0 },
-+ { READ_BASE | UTA,
-+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
-+ { READ_BASE | N_OE,
-+ /* t9 - ADDR hold time */
-+ { 20, 15, 10, 10, 10, 10, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OD_EXTDEL_MIN) },
-+ { READ_BASE | N_OE | N_CS_H2,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { READ_BASE | N_OE | N_CS,
-+ /* t6Z -IORD data tristate */
-+ { 30, 30, 30, 30, 30, 20, 20 }, 1, 1, O_MINUS_PREV },
-+ { ANOTHER_TIMING,
-+ /* t2i -IORD recovery time */
-+ { 0, 0, 0, 70, 25, 25, 20 }, 2, 0, 0 },
-+ { ANOTHER_TIMING,
-+ /* CS 0 -> 1 MAX */
-+ { 0, 0, 0, 0, 0, 0, 0 }, 1, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { READ_BASE | N_OE | N_CS | LAST,
-+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
-+ { EOF_UPM_SETTINGS,
-+ /* min total cycle time - includes turnaround and ALE cycle */
-+ { 600, 383, 240, 180, 120, 100, 80 }, 2, 0, O_MIN_CYCLE_TIME },
-+};
-+
-+static const struct upm_setting cfUpmWriteSingle[] = {
-+ { WRITE_BASE | N_WE,
-+ /* t1 - ADDR setup time */
-+ { 70, 50, 30, 30, 25, 15, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { WRITE_BASE | N_WE_H1,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { WRITE_BASE,
-+ /* t2 - WE0 time */
-+ { 290, 290, 290, 80, 70, 65, 55 }, 0, 1, OA_CPUOUT_DELTA },
-+ { WRITE_BASE | WAEN,
-+ { 1, 1, 1, 1, 1, 0, 0 }, 0, 0, 0 },
-+ { WRITE_BASE | N_WE,
-+ /* t9 - ADDR hold time */
-+ { 20, 15, 10, 10, 10, 10, 10 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OD_EXTDEL_MIN) },
-+ { WRITE_BASE | N_WE | N_CS_H2,
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE },
-+ { WRITE_BASE | N_WE | N_CS,
-+ /* t4 - DATA hold time */
-+ { 30, 20, 15, 10, 10, 10, 10 }, 0, 1, O_MINUS_PREV },
-+ { ANOTHER_TIMING,
-+ /* t2i -IOWR recovery time */
-+ { 0, 0, 0, 70, 25, 25, 20 }, 1, 0, 0 },
-+ { ANOTHER_TIMING,
-+ /* CS 0 -> 1 MAX */
-+ { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, (OA_CPUOUT_DELTA |
-+ OA_EXTDEL_MAX) },
-+ { WRITE_BASE | N_WE | N_CS | UTA | LAST,
-+ { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 },
-+ /* min total cycle time - includes ALE cycle */
-+ { EOF_UPM_SETTINGS,
-+ { 600, 383, 240, 180, 120, 100, 80 }, 1, 0, O_MIN_CYCLE_TIME },
-+};
-+
-+static u8 rbppc_cf_check_status(struct ata_port *ap) {
-+ u8 val = ioread8(ap->ioaddr.status_addr);
-+ if (val == 0xF9)
-+ val = 0x7F;
-+ return val;
-+}
-+
-+static u8 rbppc_cf_check_altstatus(struct ata_port *ap) {
-+ u8 val = ioread8(ap->ioaddr.altstatus_addr);
-+ if (val == 0xF9)
-+ val = 0x7F;
-+ return val;
-+}
-+
-+static void rbppc_cf_dummy_noret(struct ata_port *ap) { }
-+static int rbppc_cf_dummy_ret0(struct ata_port *ap) { return 0; }
-+
-+static int ps2clk(int ps, unsigned clk_time_ps) {
-+ int psMaxOver;
-+ if (ps <= 0) return 0;
-+
-+ /* round down if <= 2% over clk border, but no more than 1/4 clk cycle */
-+ psMaxOver = ps * 2 / 100;
-+ if (4 * psMaxOver > clk_time_ps) {
-+ psMaxOver = clk_time_ps / 4;
-+ }
-+ return (ps + clk_time_ps - 1 - psMaxOver) / clk_time_ps;
-+}
-+
-+static int upm_gen_ps_table(const struct upm_setting *upm,
-+ int mode, struct rbppc_cf_info *info,
-+ int *psFinal) {
-+ int uidx;
-+ int lastUpmValIdx = 0;
-+ int group_start_idx = -1;
-+ int group_left_num = -1;
-+ int clk_time_ps = info->clk_time_ps;
-+
-+ for (uidx = 0; upm[uidx].value != EOF_UPM_SETTINGS; ++uidx) {
-+ const struct upm_setting *us = upm + uidx;
-+ unsigned opt = us->options;
-+ int ps = us->ns[mode] * 1000 - us->clk_minus * clk_time_ps;
-+
-+ if (opt & OA_CPUIN_MIN) ps += info->lb_timings[LBT_CPUIN_MIN];
-+ if (opt & OD_CPUOUT_MIN) ps -= info->lb_timings[LBT_CPUOUT_MIN];
-+ if (opt & OA_CPUOUT_MAX) ps += info->lb_timings[LBT_CPUOUT_MAX];
-+ if (opt & OD_EXTDEL_MIN) ps -= info->lb_timings[LBT_EXTDEL_MIN];
-+ if (opt & OA_EXTDEL_MAX) ps += info->lb_timings[LBT_EXTDEL_MAX];
-+
-+ if (us->value == ANOTHER_TIMING) {
-+ /* use longest timing from alternatives */
-+ if (psFinal[lastUpmValIdx] < ps) {
-+ psFinal[lastUpmValIdx] = ps;
-+ }
-+ ps = 0;
-+ }
-+ else {
-+ if (us->group_size) {
-+ group_start_idx = uidx;
-+ group_left_num = us->group_size;
-+ }
-+ else if (group_left_num > 0) {
-+ /* group time is divided on all group members */
-+ int clk = ps2clk(ps, clk_time_ps);
-+ psFinal[group_start_idx] -= clk * clk_time_ps;
-+ --group_left_num;
-+ }
-+ if ((opt & O_MINUS_PREV) && lastUpmValIdx > 0) {
-+ int clk = ps2clk(psFinal[lastUpmValIdx],
-+ clk_time_ps);
-+ ps -= clk * clk_time_ps;
-+ }
-+ lastUpmValIdx = uidx;
-+ }
-+ psFinal[uidx] = ps;
-+ }
-+ return uidx;
-+}
-+
-+static int free_half(int ps, int clk, int clk_time_ps) {
-+ if (clk < 2) return 0;
-+ return (clk * clk_time_ps - ps) * 2 >= clk_time_ps;
-+}
-+
-+static void upm_gen_clk_table(const struct upm_setting *upm,
-+ int mode, int clk_time_ps,
-+ int max_uidx, const int *psFinal, int *clkFinal) {
-+ int clk_cycle_time;
-+ int clk_total;
-+ int uidx;
-+
-+ /* convert picoseconds to clocks */
-+ clk_total = 0;
-+ for (uidx = 0; uidx < max_uidx; ++uidx) {
-+ int clk = ps2clk(psFinal[uidx], clk_time_ps);
-+ clkFinal[uidx] = clk;
-+ clk_total += clk;
-+ }
-+
-+ /* check possibility of half cycle usage */
-+ for (uidx = 1; uidx < max_uidx - 1; ++uidx) {
-+ if ((upm[uidx].options & O_HALF_CYCLE) &&
-+ free_half(psFinal[uidx - 1], clkFinal[uidx - 1],
-+ clk_time_ps) &&
-+ free_half(psFinal[uidx + 1], clkFinal[uidx + 1],
-+ clk_time_ps)) {
-+ ++clkFinal[uidx];
-+ --clkFinal[uidx - 1];
-+ --clkFinal[uidx + 1];
-+ }
-+ }
-+
-+ if ((upm[max_uidx].options & O_MIN_CYCLE_TIME) == 0) return;
-+
-+ /* check cycle time, adjust timings if needed */
-+ clk_cycle_time = (ps2clk(upm[max_uidx].ns[mode] * 1000, clk_time_ps) -
-+ upm[max_uidx].clk_minus);
-+ uidx = 0;
-+ while (clk_total < clk_cycle_time) {
-+ /* extend all timings in round-robin to match cycle time */
-+ if (clkFinal[uidx]) {
-+#if DEBUG_UPM
-+ printk(KERN_INFO "extending %u by 1 clk\n", uidx);
-+#endif
-+ ++clkFinal[uidx];
-+ ++clk_total;
-+ }
-+ ++uidx;
-+ if (uidx == max_uidx) uidx = 0;
-+ }
-+}
-+
-+static void add_data_val(unsigned val, int *clkLeft, int maxClk,
-+ unsigned *data, int *dataIdx) {
-+ if (*clkLeft == 0) return;
-+
-+ if (maxClk == 0 && *clkLeft >= LOOP_SIZE * 2) {
-+ int times;
-+ int times1;
-+ int times2;
-+
-+ times = *clkLeft / LOOP_SIZE;
-+ if (times > REDO_MAX_MULT * 2) times = REDO_MAX_MULT * 2;
-+ times1 = times / 2;
-+ times2 = times - times1;
-+
-+ val |= LOOP;
-+ data[*dataIdx] = val | REDO_VAL(times1);
-+ ++(*dataIdx);
-+ data[*dataIdx] = val | REDO_VAL(times2);
-+ ++(*dataIdx);
-+
-+ *clkLeft -= times * LOOP_SIZE;
-+ return;
-+ }
-+
-+ if (maxClk < 1 || maxClk > REDO_MAX_MULT) maxClk = REDO_MAX_MULT;
-+ if (*clkLeft < maxClk) maxClk = *clkLeft;
-+
-+ *clkLeft -= maxClk;
-+ val |= REDO_VAL(maxClk);
-+
-+ data[*dataIdx] = val;
-+ ++(*dataIdx);
-+}
-+
-+static int upm_gen_final_data(const struct upm_setting *upm,
-+ int max_uidx, int *clkFinal, unsigned *data) {
-+ int dataIdx;
-+ int uidx;
-+
-+ dataIdx = 0;
-+ for (uidx = 0; uidx < max_uidx; ++uidx) {
-+ int clk = clkFinal[uidx];
-+ while (clk > 0) {
-+ add_data_val(upm[uidx].value, &clk, 0,
-+ data, &dataIdx);
-+ }
-+ }
-+ return dataIdx;
-+}
-+
-+static int conv_upm_table(const struct upm_setting *upm,
-+ int mode, struct rbppc_cf_info *info,
-+ unsigned *data) {
-+#if DEBUG_UPM
-+ int uidx;
-+#endif
-+ int psFinal[32];
-+ int clkFinal[32];
-+ int max_uidx;
-+ int data_len;
-+
-+ max_uidx = upm_gen_ps_table(upm, mode, info, psFinal);
-+
-+ upm_gen_clk_table(upm, mode, info->clk_time_ps, max_uidx,
-+ psFinal, clkFinal);
-+
-+#if DEBUG_UPM
-+ /* dump out debug info */
-+ for (uidx = 0; uidx < max_uidx; ++uidx) {
-+ if (clkFinal[uidx]) {
-+ printk(KERN_INFO "idx %d val %08x clk %d ps %d\n",
-+ uidx, upm[uidx].value,
-+ clkFinal[uidx], psFinal[uidx]);
-+ }
-+ }
-+#endif
-+
-+ data_len = upm_gen_final_data(upm, max_uidx, clkFinal, data);
-+
-+#if DEBUG_UPM
-+ for (uidx = 0; uidx < data_len; ++uidx) {
-+ printk(KERN_INFO "cf UPM x result: idx %d val %08x\n",
-+ uidx, data[uidx]);
-+ }
-+#endif
-+ return 0;
-+}
-+
-+static int gen_upm_data(int mode, struct rbppc_cf_info *info, unsigned *data) {
-+ int i;
-+
-+ for (i = 0; i < UPM_DATA_SIZE; ++i) {
-+ data[i] = EMPTY;
-+ }
-+
-+ if (conv_upm_table(cfUpmReadSingle, mode, info, data + UPM_READ_SINGLE_OFFSET)) {
-+ return -1;
-+ }
-+ if (conv_upm_table(cfUpmWriteSingle, mode, info, data + UPM_WRITE_SINGLE_OFFSET)) {
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+static void rbppc_cf_program_upm(void *upmMemAddr, volatile void *lbcfg_mxmr, volatile void *lbcfg_mdr, const unsigned *upmData, unsigned offset, unsigned len) {
-+ unsigned i;
-+ unsigned mxmr;
-+
-+ mxmr = in_be32(lbcfg_mxmr);
-+ mxmr &= ~(MxMR_OP_MASK | MxMR_MAD_MASK);
-+ mxmr |= (MxMR_OP_WRITE | offset);
-+ out_be32(lbcfg_mxmr, mxmr);
-+ in_be32(lbcfg_mxmr); /* flush MxMR write */
-+
-+ for (i = 0; i < len; ++i) {
-+ int to;
-+ unsigned data = upmData[i + offset];
-+ out_be32(lbcfg_mdr, data);
-+ in_be32(lbcfg_mdr); /* flush MDR write */
-+
-+ iowrite8(1, upmMemAddr); /* dummy write to any CF addr */
-+
-+ /* wait for dummy write to complete */
-+ for (to = 10000; to >= 0; --to) {
-+ mxmr = in_be32(lbcfg_mxmr);
-+ if (((mxmr ^ (i + 1)) & MxMR_MAD_MASK) == 0) {
-+ break;
-+ }
-+ if (to == 0) {
-+ printk(KERN_ERR "rbppc_cf_program_upm: UPMx program error at 0x%x: Timeout\n", i);
-+ }
-+ }
-+ }
-+ mxmr &= ~(MxMR_OP_MASK | MxMR_RLF_MASK | MxMR_WLF_MASK);
-+ mxmr |= (MxMR_OP_NORMAL | (LOOP_SIZE << MxMR_RLF_SHIFT) | (LOOP_SIZE << MxMR_WLF_SHIFT));
-+ out_be32(lbcfg_mxmr, mxmr);
-+}
-+
-+static int rbppc_cf_update_piomode(struct ata_port *ap, int mode) {
-+ struct rbppc_cf_info *info = (struct rbppc_cf_info *)ap->host->private_data;
-+ void *lbcfgBase;
-+ unsigned upmData[UPM_DATA_SIZE];
-+
-+ if (gen_upm_data(mode, info, upmData)) {
-+ return -1;
-+ }
-+
-+ lbcfgBase = ioremap_nocache(info->lbcfg_addr, IMMR_LBCFG_SIZE);
-+
-+ rbppc_cf_program_upm(ap->ioaddr.cmd_addr, ((char *)lbcfgBase) + LOCAL_BUS_MCMR, ((char *)lbcfgBase) + LOCAL_BUS_MDR, upmData, 0, UPM_DATA_SIZE);
-+ iounmap(lbcfgBase);
-+ return 0;
-+}
-+
-+static void rbppc_cf_set_piomode(struct ata_port *ap, struct ata_device *adev)
-+{
-+ struct rbppc_cf_info *info = (struct rbppc_cf_info *)ap->host->private_data;
-+ int mode = adev->pio_mode - XFER_PIO_0;
-+
-+ DPRINTK("rbppc_cf_set_piomode: PIO %d\n", mode);
-+ if (mode < 0) mode = 0;
-+ if (mode > 6) mode = 6;
-+
-+ if (info->cur_mode < 0 || info->cur_mode > mode) {
-+ if (rbppc_cf_update_piomode(ap, mode) == 0) {
-+ printk(KERN_INFO "rbppc_cf_set_piomode: PIO mode changed to %d\n", mode);
-+ info->cur_mode = mode;
-+ }
-+ }
-+}
-+
-+static struct scsi_host_template rbppc_cf_sht = {
-+ ATA_BASE_SHT(DRV_NAME),
-+};
-+
-+static struct ata_port_operations rbppc_cf_port_ops = {
-+ .inherits = &ata_bmdma_port_ops,
-+
-+ .sff_check_status = rbppc_cf_check_status,
-+ .sff_check_altstatus = rbppc_cf_check_altstatus,
-+
-+ .set_piomode = rbppc_cf_set_piomode,
-+
-+ .port_start = rbppc_cf_dummy_ret0,
-+
-+ .sff_irq_clear = rbppc_cf_dummy_noret,
-+};
-+
-+static int rbppc_cf_init_info(struct platform_device *pdev, struct rbppc_cf_info *info) {
-+ struct device_node *np;
-+ struct resource res;
-+ const u32 *u32ptr;
-+ void *lbcfgBase;
-+ void *lbcfg_lcrr;
-+ unsigned lbc_clk_khz;
-+ unsigned lbc_extra_divider = 1;
-+ unsigned ccb_freq_hz;
-+ unsigned lb_div;
-+
-+ u32ptr = of_get_property(pdev->dev.of_node, "lbc_extra_divider", NULL);
-+ if (u32ptr && *u32ptr) {
-+ lbc_extra_divider = *u32ptr;
-+#if DEBUG_UPM
-+ printk(KERN_INFO "rbppc_cf_init_info: LBC extra divider %u\n",
-+ lbc_extra_divider);
-+#endif
-+ }
-+
-+ np = of_find_node_by_type(NULL, "serial");
-+ if (!np) {
-+ printk(KERN_ERR "rbppc_cf_init_info: No serial node found\n");
-+ return -1;
-+ }
-+ u32ptr = of_get_property(np, "clock-frequency", NULL);
-+ if (u32ptr == 0 || *u32ptr == 0) {
-+ printk(KERN_ERR "rbppc_cf_init_info: Serial does not have clock-frequency\n");
-+ of_node_put(np);
-+ return -1;
-+ }
-+ ccb_freq_hz = *u32ptr;
-+ of_node_put(np);
-+
-+ np = of_find_node_by_type(NULL, "soc");
-+ if (!np) {
-+ printk(KERN_ERR "rbppc_cf_init_info: No soc node found\n");
-+ return -1;
-+ }
-+ if (of_address_to_resource(np, 0, &res)) {
-+ printk(KERN_ERR "rbppc_cf_init_info: soc does not have resource\n");
-+ of_node_put(np);
-+ return -1;
-+ }
-+ info->lbcfg_addr = res.start + IMMR_LBCFG_OFFSET;
-+ of_node_put(np);
-+
-+ lbcfgBase = ioremap_nocache(info->lbcfg_addr, IMMR_LBCFG_SIZE);
-+ lbcfg_lcrr = ((char*)lbcfgBase) + LOCAL_BUS_LCRR;
-+ lb_div = (in_be32(lbcfg_lcrr) & LCRR_CLKDIV_MASK) * lbc_extra_divider;
-+ iounmap(lbcfgBase);
-+
-+ lbc_clk_khz = ccb_freq_hz / (1000 * lb_div);
-+ info->clk_time_ps = 1000000000 / lbc_clk_khz;
-+ printk(KERN_INFO "rbppc_cf_init_info: Using Local-Bus clock %u kHz %u ps\n",
-+ lbc_clk_khz, info->clk_time_ps);
-+
-+ u32ptr = of_get_property(pdev->dev.of_node, "lb-timings", NULL);
-+ if (u32ptr) {
-+ memcpy(info->lb_timings, u32ptr, LBT_SIZE * sizeof(*u32ptr));
-+#if DEBUG_UPM
-+ printk(KERN_INFO "rbppc_cf_init_info: Got LB timings <%u %u %u %u %u>\n",
-+ u32ptr[0], u32ptr[1], u32ptr[2], u32ptr[3], u32ptr[4]);
-+#endif
-+ }
-+ info->cur_mode = -1;
-+ return 0;
-+}
-+
-+static int rbppc_cf_probe(struct platform_device *pdev)
-+{
-+ struct ata_host *host;
-+ struct ata_port *ap;
-+ struct rbppc_cf_info *info = NULL;
-+ struct resource res;
-+ void *baddr;
-+ const u32 *u32ptr;
-+ int irq_level = 0;
-+ int err = -ENOMEM;
-+
-+ printk(KERN_INFO "rbppc_cf_probe: MikroTik RouterBOARD 600 series Compact Flash PATA driver, version " DRV_VERSION "\n");
-+
-+ if (rbinfo == NULL) {
-+ info = kmalloc(sizeof(*info), GFP_KERNEL);
-+ if (info == NULL) {
-+ printk(KERN_ERR "rbppc_cf_probe: Out of memory\n");
-+ goto err_info;
-+ }
-+ memset(info, 0, sizeof(*info));
-+
-+ if (rbppc_cf_init_info(pdev, info)) {
-+ goto err_info;
-+ }
-+ rbinfo = info;
-+ }
-+
-+ u32ptr = of_get_property(pdev->dev.of_node, "interrupt-at-level", NULL);
-+ if (u32ptr) {
-+ irq_level = *u32ptr;
-+ printk(KERN_INFO "rbppc_cf_probe: IRQ level %u\n", irq_level);
-+ }
-+
-+ if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
-+ printk(KERN_ERR "rbppc_cf_probe: No reg property found\n");
-+ goto err_info;
-+ }
-+
-+ host = ata_host_alloc(&pdev->dev, 1);
-+ if (!host)
-+ goto err_info;
-+
-+ baddr = localbus_map(res.start, res.end - res.start + 1);
-+ host->iomap = baddr;
-+ host->private_data = rbinfo;
-+
-+ ap = host->ports[0];
-+ ap->ops = &rbppc_cf_port_ops;
-+ ap->pio_mask = 0x7F; /* PIO modes 0-6 */
-+ ap->mwdma_mask = 0;
-+
-+ ap->ioaddr.cmd_addr = baddr;
-+ ata_sff_std_ports(&ap->ioaddr);
-+ ap->ioaddr.ctl_addr = ap->ioaddr.cmd_addr + 14;
-+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
-+ ap->ioaddr.bmdma_addr = 0;
-+
-+ err = ata_host_activate(
-+ host,
-+ irq_of_parse_and_map(pdev->dev.of_node, 0), ata_sff_interrupt,
-+ irq_level ? IRQF_TRIGGER_HIGH : IRQF_TRIGGER_LOW,
-+ &rbppc_cf_sht);
-+ if (!err) return 0;
-+
-+ localbus_unmap(baddr);
-+err_info:
-+ if (info) {
-+ kfree(info);
-+ rbinfo = NULL;
-+ }
-+ return err;
-+}
-+
-+static int rbppc_cf_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct ata_host *host = dev_get_drvdata(dev);
-+
-+ if (host == NULL) return -1;
-+
-+ ata_host_detach(host);
-+ return 0;
-+}
-+
-+static struct of_device_id rbppc_cf_ids[] = {
-+ { .name = "cf", },
-+ { },
-+};
-+
-+static struct platform_driver rbppc_cf_driver = {
-+ .probe = rbppc_cf_probe,
-+ .remove = rbppc_cf_remove,
-+ .driver = {
-+ .name = "rbppc-cf",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rbppc_cf_ids,
-+ },
-+};
-+
-+static int __init rbppc_init(void)
-+{
-+ return platform_driver_register(&rbppc_cf_driver);
-+}
-+
-+static void __exit rbppc_exit(void)
-+{
-+ platform_driver_unregister(&rbppc_cf_driver);
-+}
-+
-+MODULE_AUTHOR("Mikrotikls SIA");
-+MODULE_AUTHOR("Noah Fontes");
-+MODULE_DESCRIPTION("MikroTik RouterBOARD 600 series Compact Flash PATA driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(rbppc_init);
-+module_exit(rbppc_exit);
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -463,6 +463,13 @@ config MTD_NAND_PLATFORM
- devices. You will need to provide platform-specific functions
- via platform_data.
-
-+config MTD_NAND_RB_PPC
-+ tristate "MikroTik RB333/600 NAND support"
-+ depends on RB_PPC
-+ help
-+ This option enables support for the NAND device on MikroTik
-+ RouterBOARD 333/600 series boards.
-+
- config MTD_ALAUDA
- tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
- depends on USB
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB_PPC) += rbppc_nand.o
- obj-$(CONFIG_MTD_ALAUDA) += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
---- /dev/null
-+++ b/drivers/mtd/nand/rbppc_nand.c
-@@ -0,0 +1,250 @@
-+/*
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_device.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+
-+#define DRV_NAME "rbppc_nand"
-+#define DRV_VERSION "0.0.2"
-+
-+static struct mtd_info rmtd;
-+static struct nand_chip rnand;
-+
-+struct rbppc_nand_info {
-+ void *gpi;
-+ void *gpo;
-+ void *localbus;
-+
-+ unsigned gpio_rdy;
-+ unsigned gpio_nce;
-+ unsigned gpio_cle;
-+ unsigned gpio_ale;
-+ unsigned gpio_ctrls;
-+};
-+
-+/* We must use the OOB layout from yaffs 1 if we want this to be recognized
-+ * properly. Borrowed from the OpenWRT patches for the RB532.
-+ *
-+ * See <https://dev.openwrt.org/browser/trunk/target/linux/rb532/
-+ * patches-2.6.28/025-rb532_nand_fixup.patch> for more details.
-+ */
-+static struct nand_ecclayout rbppc_nand_oob_16 = {
-+ .eccbytes = 6,
-+ .eccpos = { 8, 9, 10, 13, 14, 15 },
-+ .oobavail = 9,
-+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-+};
-+
-+static struct mtd_partition rbppc_nand_partition_info[] = {
-+ {
-+ name: "kernel",
-+ offset: 0,
-+ size: 4 * 1024 * 1024,
-+ },
-+ {
-+ name: "rootfs",
-+ offset: MTDPART_OFS_NXTBLK,
-+ size: MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static int rbppc_nand_dev_ready(struct mtd_info *mtd) {
-+ struct nand_chip *chip = mtd->priv;
-+ struct rbppc_nand_info *priv = chip->priv;
-+
-+ return in_be32(priv->gpi) & priv->gpio_rdy;
-+}
-+
-+static void rbppc_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) {
-+ struct nand_chip *chip = mtd->priv;
-+ struct rbppc_nand_info *priv = chip->priv;
-+
-+ if (ctrl & NAND_CTRL_CHANGE) {
-+ unsigned val = in_be32(priv->gpo);
-+ if (!(val & priv->gpio_nce)) {
-+ /* make sure Local Bus has done NAND operations */
-+ readb(priv->localbus);
-+ }
-+
-+ if (ctrl & NAND_CLE) {
-+ val |= priv->gpio_cle;
-+ } else {
-+ val &= ~priv->gpio_cle;
-+ }
-+ if (ctrl & NAND_ALE) {
-+ val |= priv->gpio_ale;
-+ } else {
-+ val &= ~priv->gpio_ale;
-+ }
-+ if (!(ctrl & NAND_NCE)) {
-+ val |= priv->gpio_nce;
-+ } else {
-+ val &= ~priv->gpio_nce;
-+ }
-+ out_be32(priv->gpo, val);
-+
-+ /* make sure GPIO output has changed */
-+ val ^= in_be32(priv->gpo);
-+ if (val & priv->gpio_ctrls) {
-+ printk(KERN_ERR "rbppc_nand_hwcontrol: NAND GPO change failed 0x%08x\n", val);
-+ }
-+ }
-+
-+ if (cmd != NAND_CMD_NONE) writeb(cmd, chip->IO_ADDR_W);
-+}
-+
-+static void rbppc_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ memcpy(buf, chip->IO_ADDR_R, len);
-+}
-+
-+static unsigned init_ok = 0;
-+
-+static int rbppc_nand_probe(struct platform_device *pdev)
-+{
-+ struct device_node *gpio;
-+ struct device_node *nnand;
-+ struct resource res;
-+ struct rbppc_nand_info *info;
-+ void *baddr;
-+ const unsigned *rdy, *nce, *cle, *ale;
-+
-+ printk(KERN_INFO "rbppc_nand_probe: MikroTik RouterBOARD 333/600 series NAND driver, version " DRV_VERSION "\n");
-+
-+ info = kmalloc(sizeof(*info), GFP_KERNEL);
-+
-+ rdy = of_get_property(pdev->dev.of_node, "rdy", NULL);
-+ nce = of_get_property(pdev->dev.of_node, "nce", NULL);
-+ cle = of_get_property(pdev->dev.of_node, "cle", NULL);
-+ ale = of_get_property(pdev->dev.of_node, "ale", NULL);
-+
-+ if (!rdy || !nce || !cle || !ale) {
-+ printk(KERN_ERR "rbppc_nand_probe: GPIO properties are missing\n");
-+ goto err;
-+ }
-+ if (rdy[0] != nce[0] || rdy[0] != cle[0] || rdy[0] != ale[0]) {
-+ printk(KERN_ERR "rbppc_nand_probe: Different GPIOs are not supported\n");
-+ goto err;
-+ }
-+
-+ gpio = of_find_node_by_phandle(rdy[0]);
-+ if (!gpio) {
-+ printk(KERN_ERR "rbppc_nand_probe: No GPIO<%x> node found\n", *rdy);
-+ goto err;
-+ }
-+ if (of_address_to_resource(gpio, 0, &res)) {
-+ printk(KERN_ERR "rbppc_nand_probe: No reg property in GPIO found\n");
-+ goto err;
-+ }
-+ info->gpo = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ if (!of_address_to_resource(gpio, 1, &res)) {
-+ info->gpi = ioremap_nocache(res.start, res.end - res.start + 1);
-+ } else {
-+ info->gpi = info->gpo;
-+ }
-+ of_node_put(gpio);
-+
-+ info->gpio_rdy = 1 << (31 - rdy[1]);
-+ info->gpio_nce = 1 << (31 - nce[1]);
-+ info->gpio_cle = 1 << (31 - cle[1]);
-+ info->gpio_ale = 1 << (31 - ale[1]);
-+ info->gpio_ctrls = info->gpio_nce | info->gpio_cle | info->gpio_ale;
-+
-+ nnand = of_find_node_by_name(NULL, "nnand");
-+ if (!nnand) {
-+ printk("rbppc_nand_probe: No nNAND found\n");
-+ goto err;
-+ }
-+ if (of_address_to_resource(nnand, 0, &res)) {
-+ printk("rbppc_nand_probe: No reg property in nNAND found\n");
-+ goto err;
-+ }
-+ of_node_put(nnand);
-+ info->localbus = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
-+ printk("rbppc_nand_probe: No reg property found\n");
-+ goto err;
-+ }
-+ baddr = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ memset(&rnand, 0, sizeof(rnand));
-+ rnand.cmd_ctrl = rbppc_nand_cmd_ctrl;
-+ rnand.dev_ready = rbppc_nand_dev_ready;
-+ rnand.read_buf = rbppc_nand_read_buf;
-+ rnand.IO_ADDR_W = baddr;
-+ rnand.IO_ADDR_R = baddr;
-+ rnand.priv = info;
-+
-+ memset(&rmtd, 0, sizeof(rmtd));
-+ rnand.ecc.mode = NAND_ECC_SOFT;
-+ rnand.ecc.layout = &rbppc_nand_oob_16;
-+ rnand.chip_delay = 25;
-+ rmtd.priv = &rnand;
-+ rmtd.owner = THIS_MODULE;
-+
-+ if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
-+ printk(KERN_ERR "rbppc_nand_probe: RouterBOARD NAND device not found\n");
-+ return -ENXIO;
-+ }
-+
-+ mtd_device_parse_register(&rmtd, NULL, 0, rbppc_nand_partition_info, 2);
-+ init_ok = 1;
-+ return 0;
-+
-+err:
-+ kfree(info);
-+ return -1;
-+}
-+
-+static struct of_device_id rbppc_nand_ids[] = {
-+ { .name = "nand", },
-+ { },
-+};
-+
-+static struct platform_driver rbppc_nand_driver = {
-+ .probe = rbppc_nand_probe,
-+ .driver = {
-+ .name = "rbppc-nand",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rbppc_nand_ids,
-+ },
-+};
-+
-+static int __init rbppc_nand_init(void)
-+{
-+ return platform_driver_register(&rbppc_nand_driver);
-+}
-+
-+static void __exit rbppc_nand_exit(void)
-+{
-+ platform_driver_unregister(&rbppc_nand_driver);
-+}
-+
-+MODULE_AUTHOR("Mikrotikls SIA");
-+MODULE_AUTHOR("Noah Fontes");
-+MODULE_AUTHOR("Michael Guntsche");
-+MODULE_DESCRIPTION("MikroTik RouterBOARD 333/600 series NAND driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(rbppc_nand_init);
-+module_exit(rbppc_nand_exit);
+++ /dev/null
---- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
-+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
-@@ -81,6 +81,11 @@
- reg = <0x3a0000 0x3c60000>;
- label = "rootfs";
- };
-+
-+ partition1@a0000 {
-+ reg = <0xa0000 0x3f60000>;
-+ label = "firmware";
-+ };
- };
- };
-
-@@ -476,4 +481,8 @@
- default-state = "off";
- };
- };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 rootfstype=squashfs noinitrd";
-+ };
- };
projects / openwrt / staging / jow.git / commitdiff