prpl_haze \
qnap_301w \
redmi_ax6 \
+ spectrum_sax1v1k \
wallys_dr40x9 \
xiaomi_ax3600 \
xiaomi_ax9000 \
$(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
$(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
$(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
+$(eval $(call generate-ipq-wifi-package,spectrum_sax1v1k,Spectrum SAX1V1K))
$(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
$(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
$(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Spectrum SAX1V1K";
+ compatible = "spectrum,sax1v1k", "qcom,ipq8074";
+
+ aliases {
+ led-boot = &led_system_red;
+ led-failsafe = &led_system_red;
+ led-running = &led_system_blue;
+ led-upgrade = &led_system_red;
+ serial0 = &blsp1_uart5;
+ /* Aliases as required by u-boot to patch MAC addresses */
+ ethernet0 = &dp6_syn;
+ ethernet1 = &dp4;
+ ethernet2 = &dp3;
+ ethernet3 = &dp2;
+ label-mac-device = &dp6_syn;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system_blue: system-blue {
+ gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led_system_red: system-red {
+ gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ };
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio-pins {
+ mdc {
+ pins = "gpio68";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio69";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
+
+&blsp1_uart5 {
+ status = "okay";
+};
+
+&prng {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ ethernet-phy-package@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,qca8075-package";
+ reg = <0>;
+
+ qcom,package-mode = "qsgmii";
+
+ qca8075_1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ qca8075_2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ qca8075_3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+ };
+
+ qca8081: ethernet-phy@28 {
+ compatible = "ethernet-phy-id004d.d101";
+ reg = <28>;
+ reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&sdhc_1 {
+ /* Following same rule as QNAP 301W
+ * the emmc has a problem with the hs400 > hs200 speed switch.
+ * Therefore remove the mmc-hs400-1_8v property
+ */
+ /delete-property/ mmc-hs400-1_8v;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
+ vqmmc-supply = <&l11>;
+ status = "okay";
+};
+
+&switch {
+ switch_lan_bmp = <(ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
+ switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
+ switch_mac_mode = <MAC_MODE_QSGMII>; /* mac mode for uniphy instance0*/
+ switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance2*/
+ status = "okay";
+
+ qcom,port_phyinfo {
+ port@2 {
+ port_id = <2>;
+ phy_address = <1>;
+ };
+
+ port@3 {
+ port_id = <3>;
+ phy_address = <2>;
+ };
+
+ port@4 {
+ port_id = <4>;
+ phy_address = <3>;
+ };
+
+ port@6 {
+ port_id = <6>;
+ phy_address = <28>;
+ port_mac_sel = "QGMAC_PORT";
+ };
+ };
+};
+
+&edma {
+ status = "okay";
+};
+
+&dp2 {
+ phy-mode = "qsgmii";
+ phy-handle = <&qca8075_1>;
+ label = "lan3";
+ status = "okay";
+};
+
+&dp3 {
+ phy-mode = "qsgmii";
+ phy-handle = <&qca8075_2>;
+ label = "lan2";
+ status = "okay";
+};
+
+&dp4 {
+ phy-mode = "qsgmii";
+ phy-handle = <&qca8075_3>;
+ label = "lan1";
+ status = "okay";
+};
+
+&dp6_syn {
+ phy-handle = <&qca8081>;
+ label = "wan";
+ status = "okay";
+};
+
+&wifi {
+ qcom,ath11k-calibration-variant = "Spectrum-SAX1V1K";
+ status = "okay";
+};
projects / openwrt / openwrt.git / commitdiff