ramips: Backport support for Netgear EX2700

This patch adds support for the Netgear EX2700 in Chaos Calmer and
builds approriate -sysupgrade and -factory images.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
SVN-Revision: 48792

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 5946f98bdb1251b5b25cfbc64a4ed97880615bb8..5327d006299ed94c645542f687e20962c83e842d 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -114,6 +114,10 @@ case $board in
        esr-9753)
                set_wifi_led "rt2800pci-phy0::radio"
                ;;
+       ex2700)
+               ucidef_set_led_default "power_r" "POWER (red)" "ex2700:red:power" "0"
+               set_wifi_led "ex2700:green:router"
+               ;;
        f5d8235-v1)
                set_usb_led "f5d8235-v1:blue:storage"
                ;;

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index d7d016befe19e95095d753218989a4e29b8fdad0..a78912dbc9b5ecdc8a9fb0c583c1e47fdb579015 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -113,7 +113,8 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
                ;;
 
-       cf-wr800n)
+       cf-wr800n|\
+       ex2700)
                ucidef_set_interface_lan "eth0.1"
                ucidef_add_switch "switch0" "1" "1"
                ucidef_add_switch_vlan "switch0" "1" "4 6t"

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index a7e2501e09fee933f81aafb01034e687883d59b2..6474ebdde354b51648fcafd426e3256f0b6fe8b4 100644 (file)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -63,6 +63,9 @@ get_status_led() {
        esr-9753)
                status_led="esr-9753:orange:power"
                ;;
+       ex2700)
+               status_led="ex2700:red:power"
+               ;;
        f5d8235-v2)
                status_led="f5d8235v2:blue:router"
                ;;

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 4141ddd68b034211188a7d0deac02116107c991f..8dc05b060c8be19bf94101f5d3061acc436d8a91 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -223,6 +223,9 @@ ramips_board_detect() {
        *"Netgear WNCE2001")
                name="wnce2001"
                ;;
+       *"Netgear EX2700")
+               name="ex2700"
+               ;;
        *"NexAira BC2")
                name="bc2"
                ;;

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 2f64d8c0c4863b03d15493f52777239f6972977c..a3d0175dcfe49ee5c4775ba5ec4db24638f0c203 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -49,6 +49,7 @@ platform_check_image() {
        dir-620-d1 | \
        dir-810l | \
        e1700 | \
+       ex2700 |\
        esr-9753 | \
        f7c027 | \
        fonera20n | \

diff --git a/target/linux/ramips/dts/EX2700.dts b/target/linux/ramips/dts/EX2700.dts
new file mode 100644 (file)
index 0000000..da98bd8
--- /dev/null
+++ b/target/linux/ramips/dts/EX2700.dts
@@ -0,0 +1,148 @@
+/*
+ * Device Tree file for the Netgear EX2700
+ *
+ * Copyright (C) 2016 Joseph C. Lehner <joseph.c.lehner@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+       compatible = "ralink,mt7620a-soc";
+       model = "Netgear EX2700";
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       palmbus@10000000 {
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               gpio1: gpio@638 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "mx25l3205d";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l3205d";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@40000 {
+                                       label = "firmware";
+                                       reg = <0x40000 0x3b0000>;
+                               };
+
+                               art: partition@3f0000 {
+                                       label = "art";
+                                       reg = <0x3f0000 0x10000>;
+                                       read-only;
+                               };
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               mtd-mac-address = <&art 0x0>;
+       };
+
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&art 0x1000>;
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       default {
+                               //  spi refclk: pins 37, 38, 39
+                               //       uartf: pins 8, 9, 10, 11, 12, 13, 14
+                               //         i2c: pins 1, 2
+                               ralink,group = "i2c", "uartf", "spi refclk";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power_g {
+                       label = "ex2700:green:power";
+                       gpios = <&gpio0 9 1>;
+                       default-state = "on";
+               };
+
+               power_r {
+                       label = "ex2700:red:power";
+                       gpios = <&gpio0 11 1>;
+               };
+
+               device_g {
+                       label = "ex2700:green:device";
+                       gpios = <&gpio0 13 1>;
+               };
+
+               device_r {
+                       label = "ex2700:red:device";
+                       gpios = <&gpio0 10 1>;
+               };
+
+               router_g {
+                       label = "ex2700:green:router";
+                       gpios = <&gpio0 12 1>;
+               };
+
+               router_r {
+                       label = "ex2700:red:router";
+                       gpios = <&gpio0 14 1>;
+               };
+
+               wps {
+                       label = "ex2700:green:wps";
+                       gpios = <&gpio1 15 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 1>;
+                       linux,code = <0x198>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 2 1>;
+                       linux,code = <0x211>;
+               };
+       };
+};

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 0d762baad28b40609204b23d1d2f7cc7bb92d9b3..c4f4028cb93de83231ae5746d11dfb8bef21ea07 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -854,7 +854,34 @@ endif
 # MT7620A Profiles
 #
 
+# $(1): (ignored)
+# $(2): lowercase board name
+# $(3): uppercase board name (must match DTS filename w/o extension)
+# $(4): erase block size
+# $(5): hardware id for mkdniimg
+# $(6): maximum image size
+define BuildFirmware/Netgear/squashfs
+       $(call PatchKernelLzmaDtb,$(2),$(3))
+       # Pad kernel to eraseblock boundary, minus 2 uImage headers (=128 bytes):
+       # bs = (eraseblock * (1 + (128 + kernelsize)/eraseblock)) - 128
+       dd if=$(KDIR)/vmlinux-$(2).bin.lzma \
+               of=$(KDIR)/vmlinux-$(2).bin.lzma.tmp \
+               bs=`expr \( $(4) \* \( 1 + \( 128 + \`wc -c < $(KDIR)/vmlinux-$(2).bin.lzma\` \) / $(4) \) \) - 128` \
+               count=1 conv=sync
+
+       $(call MkImage,lzma,$(KDIR)/vmlinux-$(2).bin.lzma.tmp,$(KDIR)/vmlinux-$(2).uImage)
+       cat ex2700-fakeroot.uImage >> $(KDIR)/vmlinux-$(2).uImage
+       $(call MkImageSysupgrade/squashfs,squashfs,$(2),$(6))
+
+       $(STAGING_DIR_HOST)/bin/mkdniimg \
+               -B $(3) -H $(5) -v OpenWrt \
+               -i $(call imgname,squashfs,$(2))-sysupgrade.bin \
+               -o $(call imgname,squashfs,$(2))-factory.bin
+endef
+
 Image/Build/Profile/E1700=$(call BuildFirmware/UMedia/$(1),$(1),e1700,E1700,0x013326)
+ex2700_mtd_size=3866624
+Image/Build/Profile/EX2700=$(call BuildFirmware/Netgear/$(1),$(1),ex2700,EX2700,65536,29764623+4+0+32+2x2+0,$(ex2700_mtd_size))
 Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a)
 Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
 Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530)
@@ -893,6 +920,7 @@ Image/Build/Profile/MicroWRT=$(call BuildFirmware/CustomFlash/$(1),$(1),microwrt
 ifeq ($(SUBTARGET),mt7620)
 define Image/Build/Profile/Default
        $(call Image/Build/Profile/E1700,$(1))
+       $(call Image/Build/Profile/EX2700,$(1))
        $(call Image/Build/Profile/MT7620a,$(1))
        $(call Image/Build/Profile/MT7620a_MT7610e,$(1))
        $(call Image/Build/Profile/MT7620a_MT7530,$(1))

diff --git a/target/linux/ramips/image/ex2700-fakeroot.uImage b/target/linux/ramips/image/ex2700-fakeroot.uImage
new file mode 100644 (file)
index 0000000..340f736
Binary files /dev/null and b/target/linux/ramips/image/ex2700-fakeroot.uImage differ

diff --git a/target/linux/ramips/mt7620/profiles/netgear.mk b/target/linux/ramips/mt7620/profiles/netgear.mk
new file mode 100644 (file)
index 0000000..d1b073a
--- /dev/null
+++ b/target/linux/ramips/mt7620/profiles/netgear.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2016 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/EX2700
+       NAME:=Netgear EX2700
+       PACKAGES:=-kmod-usb-core -kmod-usb2 -kmod-usb-ohci -kmod-ledtrig-usbdev
+endef
+
+define Profile/EX2700/Description
+       Support for Netgear EX2700
+endef
+$(eval $(call Profile,EX2700))