Add AverMedia AverTV Satellite Hybrid+FM (A706) card to saa7134 driver.
Working: analog inputs, TV, FM radio and IR remote control.
Untested: DVB-S.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
return 0;
dprintk(1, "read key 0x%02x/0x%02x\n", key, keygroup);
- if (keygroup < 2 || keygroup > 3) {
+ if (keygroup < 2 || keygroup > 4) {
/* Only a warning */
dprintk(1, "warning: invalid key group 0x%02x for key 0x%02x\n",
keygroup, key);
*ir_key = key;
*ir_raw = key;
+ if (!strcmp(ir->ir_codes, RC_MAP_AVERMEDIA_M733A_RM_K6)) {
+ *ir_key |= keygroup << 8;
+ *ir_raw |= keygroup << 8;
+ }
return 1;
}
rc_type = RC_BIT_OTHER;
ir_codes = RC_MAP_AVERMEDIA_CARDBUS;
break;
+ case 0x41:
+ name = "AVerMedia EM78P153";
+ ir->get_key = get_key_avermedia_cardbus;
+ rc_type = RC_BIT_OTHER;
+ /* RM-KV remote, seems to be same as RM-K6 */
+ ir_codes = RC_MAP_AVERMEDIA_M733A_RM_K6;
+ break;
case 0x71:
name = "Hauppauge/Zilog Z8";
ir->get_key = get_key_haup_xvr;
/* ------------------------------------------------------------------ */
/* board config info */
+static struct tda18271_std_map aver_a706_std_map = {
+ .fm_radio = { .if_freq = 5500, .fm_rfn = 0, .agc_mode = 3, .std = 0,
+ .if_lvl = 0, .rfagc_top = 0x2c, },
+};
+
/* If radio_type !=UNSET, radio_addr should be specified
*/
.gpio = 0x6010000,
} },
},
+ [SAA7134_BOARD_AVERMEDIA_A706] = {
+ .name = "AverMedia AverTV Satellite Hybrid+FM A706",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tda829x_conf = { .lna_cfg = 0, .no_i2c_gate = 1,
+ .tda18271_std_map = &aver_a706_std_map },
+ .gpiomask = 1 << 11,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }, {
+ .name = name_comp,
+ .vmux = 4,
+ .amux = LINE1,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0000800,
+ },
+ },
};
.subvendor = 0x6000,
.subdevice = 0x0911,
.driver_data = SAA7134_BOARD_SENSORAY811_911,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x1461, /* Avermedia Technologies Inc */
+ .subdevice = 0x2055, /* AverTV Satellite Hybrid+FM A706 */
+ .driver_data = SAA7134_BOARD_AVERMEDIA_A706,
}, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x80040100, 0x80040100);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x80040100, 0x00040100);
break;
+ case SAA7134_BOARD_AVERMEDIA_A706:
+ /* radio antenna select: tristate both as in Windows driver */
+ saa7134_set_gpio(dev, 12, 3); /* TV antenna */
+ saa7134_set_gpio(dev, 13, 3); /* FM antenna */
+ dev->has_remote = SAA7134_REMOTE_I2C;
+ /*
+ * Disable CE5039 DVB-S tuner now (SLEEP pin high) to prevent
+ * it from interfering with analog tuner detection
+ */
+ saa7134_set_gpio(dev, 23, 1);
+ break;
case SAA7134_BOARD_VIDEOMATE_S350:
dev->has_remote = SAA7134_REMOTE_GPIO;
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x0000C000, 0x0000C000);
.demod_address = 0x0e,
};
+static struct mt312_config zl10313_avermedia_a706_config = {
+ .demod_address = 0x0e,
+};
+
static struct lgdt3305_config hcw_lgdt3305_config = {
.i2c_addr = 0x0e,
.mpeg_mode = LGDT3305_MPEG_SERIAL,
&prohdtv_pro2_tda18271_config);
}
break;
+ case SAA7134_BOARD_AVERMEDIA_A706:
+ /* Enable all DVB-S devices now */
+ /* CE5039 DVB-S tuner SLEEP pin low */
+ saa7134_set_gpio(dev, 23, 0);
+ /* CE6313 DVB-S demod SLEEP pin low */
+ saa7134_set_gpio(dev, 9, 0);
+ /* CE6313 DVB-S demod RESET# pin high */
+ saa7134_set_gpio(dev, 25, 1);
+ msleep(1);
+ fe0->dvb.frontend = dvb_attach(mt312_attach,
+ &zl10313_avermedia_a706_config, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+ if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap) == NULL)
+ wprintk("%s: No zl10039 found!\n",
+ __func__);
+ }
+ break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
addr |= 1;
if (i > 0 && msgs[i].flags &
I2C_M_RD && msgs[i].addr != 0x40 &&
+ msgs[i].addr != 0x41 &&
msgs[i].addr != 0x19) {
/* workaround for a saa7134 i2c bug
* needed to talk to the mt352 demux
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
info.addr = 0x40;
break;
+ case SAA7134_BOARD_AVERMEDIA_A706:
+ info.addr = 0x41;
+ break;
case SAA7134_BOARD_FLYDVB_TRIO:
dev->init_data.name = "FlyDVB Trio";
dev->init_data.get_key = get_key_flydvb_trio;
dprintk("FM Radio\n");
if (dev->tuner_type == TUNER_PHILIPS_TDA8290) {
norms = (0x11 << 2) | 0x01;
+ /* set IF frequency to 5.5 MHz */
saa_dsp_writel(dev, 0x42c >> 2, 0x729555);
} else {
norms = (0x0f << 2) | 0x01;
#define SAA7134_BOARD_KWORLD_PC150U 189
#define SAA7134_BOARD_ASUSTeK_PS3_100 190
#define SAA7134_BOARD_HAWELL_HW_9004V1 191
+#define SAA7134_BOARD_AVERMEDIA_A706 192
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8