mt76: mt76x0e: don't use hw encryption for MT7630E

Since 41634aa8d6db ("mt76: only schedule txqs from the tx tasklet")
I can observe firmware hangs on MT7630E on station mode: tx stop
functioning after minor activity (rx keep working) and on module
unload device fail to stop with messages:

[ 5446.141413] mt76x0e 0000:06:00.0: TX DMA did not stop
[ 5449.176764] mt76x0e 0000:06:00.0: TX DMA did not stop

Loading module again results in failure to associate with AP.
Only machine power off / power on cycle can make device work again.

It's unclear why commit 41634aa8d6db causes the problem, but it is
related to HW encryption. Since issue is a firmware hang, that is super
hard to debug, just disable HW encryption as fix for the issue.

Fixes: 41634aa8d6db ("mt76: only schedule txqs from the tx tasklet")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c b/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
index 4585e1b756c2096d93321e9d3aa8da1f2ff25d49..6117e6ca08cb7cf6cedb6b46b9a426f1bd0d0b10 100644 (file)
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/pci.c
@@ -62,6 +62,19 @@ static void mt76x0e_stop(struct ieee80211_hw *hw)
        mt76x0e_stop_hw(dev);
 }
 
+static int
+mt76x0e_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+               struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+               struct ieee80211_key_conf *key)
+{
+       struct mt76x02_dev *dev = hw->priv;
+
+       if (is_mt7630(dev))
+               return -EOPNOTSUPP;
+
+       return mt76x02_set_key(hw, cmd, vif, sta, key);
+}
+
 static void
 mt76x0e_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
              u32 queues, bool drop)
@@ -78,7 +91,7 @@ static const struct ieee80211_ops mt76x0e_ops = {
        .configure_filter = mt76x02_configure_filter,
        .bss_info_changed = mt76x02_bss_info_changed,
        .sta_state = mt76_sta_state,
-       .set_key = mt76x02_set_key,
+       .set_key = mt76x0e_set_key,
        .conf_tx = mt76x02_conf_tx,
        .sw_scan_start = mt76x02_sw_scan,
        .sw_scan_complete = mt76x02_sw_scan_complete,