mac80211: allow AP configuration of beacon interval, DTIM period, maximum permissible...
authorFelix Fietkau <nbd@openwrt.org>
Wed, 2 Mar 2011 21:08:28 +0000 (21:08 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Wed, 2 Mar 2011 21:08:28 +0000 (21:08 +0000)
This introduces beacon_int and basic_rate (per wifi-device), and
dtim_period and max_listen_int (per wifi-iface) for mac80211. These
configure the beacon interval, basic rate specification, DTIM period
(one DTIM per this many beacon frames), and maximum listen interval
that a STA will be permitted to associate with. All of the new
settings are optional; if they're absent, the existing hostapd (or, in
the case of basic_rate, driver) defaults will be used.

The existing bintval property only used for type adhoc is moved from
wifi-iface to wifi-device, and is renamed to beacon_interval because
bintval isn't a great name. The beacon interval is property of the
wifi-device; while the choice between wifi-device and wifi-iface may
not be relevant with an adhoc network, there's no reason to configure
the same property one way for type adhoc and another for type ap. This
change isn't expected to cause many problems, as bintval was added
recently, in r25111.

Similarly, the list of basic rates, also added for type adhoc in
r25111, is a property of the device and not the interface. Further, it
ought to be represented in UCI as a list, not a string dependent on
the format that iw uses. I’ve moved it onto the device, renamed it to
basic_rate, and made it configurable for APs via hostapd. Finally, I
adapted it to use the same kb/s representation as mcast_rate; there's
precedent for this format in that it's also how madwifi interprets
mcast_rate.

Neither bintval nor basicrates were ever documented in the UCI
wireless configuration page on the wiki. When this change is
committed, I'll update the documentation as needed.

Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 25837

package/mac80211/files/lib/wifi/mac80211.sh

index ac1562fb24d4297770a67133d1d25ad29c4354a9..386bda8e5278158e6a0a0bac4bc13417c14b1f01 100644 (file)
@@ -13,6 +13,8 @@ mac80211_hostapd_setup_base() {
        config_get country "$device" country
        config_get hwmode "$device" hwmode
        config_get channel "$device" channel
+       config_get beacon_int "$device" beacon_int
+       config_get basic_rate_list "$device" basic_rate
        config_get_bool noscan "$device" noscan
        [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
        [ "$channel" = auto ] && channel=
@@ -51,6 +53,16 @@ mac80211_hostapd_setup_base() {
                        echo "$mac" >> $macfile
                done
        }
+
+       local br brval brstr
+       [ -n "$basic_rate_list" ] && {
+               for br in $basic_rate_list; do
+                       brval="$(($br / 100))"
+                       [ -n "$brstr" ] && brstr="$brstr "
+                       brstr="$brstr$brval"
+               done
+       }
+       
        cat >> "$cfgfile" <<EOF
 ctrl_interface=/var/run/hostapd-$phy
 driver=nl80211
@@ -92,8 +104,10 @@ tx_queue_data0_cwmax=7
 tx_queue_data0_burst=1.5
 ${hwmode:+hw_mode=$hwmode}
 ${channel:+channel=$channel}
+${beacon_int:+beacon_int=$beacon_int}
 ${country:+country_code=$country}
 ${noscan:+noscan=$noscan}
+${brstr:+basic_rates=$brstr}
 $base_cfg
 
 EOF
@@ -127,6 +141,8 @@ mac80211_hostapd_setup_bss() {
        local macaddr hidden maxassoc wmm
        config_get macaddr "$vif" macaddr
        config_get maxassoc "$vif" maxassoc
+       config_get dtim_period "$vif" dtim_period
+       config_get max_listen_int "$vif" max_listen_int
        config_get_bool hidden "$vif" hidden 0
        config_get_bool wmm "$vif" wmm 1
        cat >> /var/run/hostapd-$phy.conf <<EOF
@@ -134,6 +150,8 @@ $hostapd_cfg
 wmm_enabled=$wmm
 bssid=$macaddr
 ignore_broadcast_ssid=$hidden
+${dtim_period:+dtim_period=$dtim_period}
+${max_listen_int:+max_listen_interval=$max_listen_int}
 ${maxassoc:+max_num_sta=$maxassoc}
 EOF
 }
@@ -390,8 +408,8 @@ enable_mac80211() {
                                adhoc)
                                        config_get bssid "$vif" bssid
                                        config_get ssid "$vif" ssid
-                                       config_get bintval "$vif" bintval
-                                       config_get basicrates "$vif" basicrates
+                                       config_get beacon_int "$device" beacon_int
+                                       config_get basic_rate_list "$device" basic_rate
                                        config_get encryption "$vif" encryption
                                        config_get key "$vif" key 1
                                        config_get mcast_rate "$vif" mcast_rate
@@ -416,6 +434,17 @@ enable_mac80211() {
                                                esac
                                        }
 
+                                       local br brval brsub brstr
+                                       [ -n "$basic_rate_list" ] && {
+                                               for br in $basic_rate_list; do
+                                                       brval="$(($br / 1000))"
+                                                       brsub="$((($br / 100) % 10))"
+                                                       [ "$brsub" -gt 0 ] && brval="$brval.$brsub"
+                                                       [ -n "$brstr" ] && brstr="$brstr,"
+                                                       brstr="$brstr$brval"
+                                               done
+                                       }
+
                                        local mcval=""
                                        [ -n "$mcast_rate" ] && {
                                                mcval="$(($mcast_rate / 1000))"
@@ -425,8 +454,8 @@ enable_mac80211() {
 
                                        iw dev "$ifname" ibss join "$ssid" $freq \
                                                ${fixed:+fixed-freq} $bssid \
-                                               ${bintval:+beacon-interval $bintval} \
-                                               ${basicrates:+basic-rates $basicrates} \
+                                               ${beacon_int:+beacon-interval $beacon_int} \
+                                               ${brstr:+basic-rates $brstr} \
                                                ${mcval:+mcast-rate $mcval} \
                                                ${keyspec:+keys $keyspec}
                                ;;