imx: cortexa7: adjust kernel config defaults for i.MX 7
authorLech Perczak <lech.perczak@gmail.com>
Mon, 18 Apr 2022 00:09:59 +0000 (02:09 +0200)
committerPiotr Dymacz <pepe2k@gmail.com>
Mon, 11 Jul 2022 12:14:01 +0000 (14:14 +0200)
Add initial symbols required for i.MX 7 boards, based on devices
available on TechNexion PICO-PI-IMX7D board.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
[pepe2k@gmail.com: refreshed subtarget kernel config]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
target/linux/imx/cortexa7/config-default

index 68437aeca3b5c051c55d0e201c76ce922f335649..6b1493fe1908e18a64b70bb9bba6e31de377b1e8 100644 (file)
@@ -1,6 +1,12 @@
 CONFIG_ARM_CPU_SUSPEND=y
 CONFIG_ARM_GIC=y
+# CONFIG_ARM_IMX6Q_CPUFREQ is not set
+CONFIG_ARM_IMX_CPUFREQ_DT=y
+CONFIG_ARM_PSCI=y
+CONFIG_ARM_PSCI_FW=y
+CONFIG_AT803X_PHY=y
 CONFIG_CLK_IMX6UL=y
+CONFIG_CLK_IMX7D=y
 CONFIG_CMA=y
 CONFIG_CMA_AREAS=7
 # CONFIG_CMA_DEBUG is not set
@@ -8,19 +14,32 @@ CONFIG_CMA_AREAS=7
 # CONFIG_CMA_SYSFS is not set
 CONFIG_CONTIG_ALLOC=y
 # CONFIG_DMA_CMA is not set
+CONFIG_FEC=y
+CONFIG_FSL_GUTS=y
 CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
 CONFIG_HW_RANDOM_IMX_RNGC=y
+CONFIG_IMX_GPCV2=y
+CONFIG_IMX_GPCV2_PM_DOMAINS=y
 CONFIG_JFFS2_FS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_MEMORY_ISOLATION=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_PINCTRL_IMX=y
 CONFIG_PINCTRL_IMX6UL=y
+CONFIG_PINCTRL_IMX7D=y
 CONFIG_PM_GENERIC_DOMAINS=y
 CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_REGULATOR_ANATOP=y
+CONFIG_RESET_IMX7=y
 CONFIG_SOC_IMX6=y
 CONFIG_SOC_IMX6UL=y
+CONFIG_SOC_IMX7D=y
+CONFIG_SOC_IMX7D_CA7=y
 CONFIG_SPI_FSL_QUADSPI=y
 CONFIG_SPI_MEM=y