MGSLPC_MAGIC 0x5402 mgslpc_info drivers/char/pcmcia/synclink_cs.c
TTY_LDISC_MAGIC 0x5403 tty_ldisc include/linux/tty_ldisc.h
USB_SERIAL_MAGIC 0x6702 usb_serial drivers/usb/serial/usb-serial.h
-FULL_DUPLEX_MAGIC 0x6969 drivers/net/tulip/de2104x.c
+FULL_DUPLEX_MAGIC 0x6969 drivers/net/ethernet/dec/tulip/de2104x.c
USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth drivers/usb/class/bluetty.c
RFCOMM_TTY_MAGIC 0x6d02 net/bluetooth/rfcomm/tty.c
USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port drivers/usb/serial/usb-serial.h
5) The bus must also be declared somewhere as a device, and registered.
As an example for how one driver implemented an mdio bus driver, see
- drivers/net/gianfar_mii.c and arch/ppc/syslib/mpc85xx_devices.c
+ drivers/net/ethernet/freescale/fsl_pq_mdio.c and an associated DTS file
+ for one of the users. (e.g. "git grep fsl,.*-mdio arch/powerpc/boot/dts/")
Connecting to a PHY
MGSLPC_MAGIC 0x5402 mgslpc_info drivers/char/pcmcia/synclink_cs.c
TTY_LDISC_MAGIC 0x5403 tty_ldisc include/linux/tty_ldisc.h
USB_SERIAL_MAGIC 0x6702 usb_serial drivers/usb/serial/usb-serial.h
-FULL_DUPLEX_MAGIC 0x6969 drivers/net/tulip/de2104x.c
+FULL_DUPLEX_MAGIC 0x6969 drivers/net/ethernet/dec/tulip/de2104x.c
USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth drivers/usb/class/bluetty.c
RFCOMM_TTY_MAGIC 0x6d02 net/bluetooth/rfcomm/tty.c
USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port drivers/usb/serial/usb-serial.h
/*
* slcan.c - serial line CAN interface driver (using tty line discipline)
*
- * This file is derived from linux/drivers/net/slip.c
+ * This file is derived from linux/drivers/net/slip/slip.c
*
* slip.c Authors : Laurence Culhane <loz@holmes.demon.co.uk>
* Fred N. van Kempen <waltje@uwalt.nl.mugnet.org>
available from <http://www.tldp.org/docs.html#howto>. More
specific information is in
<file:Documentation/networking/vortex.txt> and in the comments at
- the beginning of <file:drivers/net/3c59x.c>.
+ the beginning of <file:drivers/net/ethernet/3com/3c59x.c>.
To compile this support as a module, choose M here.
-/* drivers/net/ax88796.c
+/* drivers/net/ethernet/8390/ax88796.c
*
* Copyright 2005,2007 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
unsigned int ioaddr = dev->base_addr;
int i, j;
- /* This is based on drivers/net/ne.c */
+ /* This is based on drivers/net/ethernet/8390/ne.c */
struct {
u_char value, offset;
} program_seq[] = {
u_char prom[32];
int i, j;
- /* This is lifted straight from drivers/net/ne.c */
+ /* This is lifted straight from drivers/net/ethernet/8390/ne.c */
struct {
u_char value, offset;
} program_seq[] = {
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto> as well as
- <file:drivers/net/depca.c>.
+ <file:drivers/net/ethernet/amd/depca.c>.
To compile this driver as a module, choose M here. The module
will be called depca.
/*
- * linux/drivers/net/am79c961.c
+ * linux/drivers/net/ethernet/amd/am79c961a.c
*
* by Russell King <rmk@arm.linux.org.uk> 1995-2001.
*
/*
- * linux/drivers/net/arm/am79c961a.h
+ * linux/drivers/net/ethernet/amd/am79c961a.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
/*
- drivers/net/tulip/21142.c
+ drivers/net/ethernet/dec/tulip/21142.c
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
/*
- drivers/net/tulip/eeprom.c
+ drivers/net/ethernet/dec/tulip/eeprom.c
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
/*
- drivers/net/tulip/interrupt.c
+ drivers/net/ethernet/dec/tulip/interrupt.c
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
/*
- drivers/net/tulip/media.c
+ drivers/net/ethernet/dec/tulip/media.c
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
/*
- drivers/net/tulip/pnic.c
+ drivers/net/ethernet/dec/tulip/pnic.c
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
/*
- drivers/net/tulip/pnic2.c
+ drivers/net/ethernet/dec/tulip/pnic2.c
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
/*
- drivers/net/tulip/timer.c
+ drivers/net/ethernet/dec/tulip/timer.c
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
/*
- drivers/net/tulip/tulip.h
+ drivers/net/ethernet/dec/tulip/tulip.h
Copyright 2000,2001 The Linux Kernel Team
Written/copyright 1994-2001 by Donald Becker.
/*
- * linux/drivers/net/ethoc.c
+ * linux/drivers/net/ethernet/ethoc.c
*
* Copyright (C) 2007-2008 Avionic Design Development GmbH
* Copyright (C) 2008-2009 Avionic Design GmbH
/*
- * drivers/drivers/net/fec_mpc52xx/fec.h
+ * drivers/net/ethernet/freescale/fec_mpc52xx.h
*
* Driver for the MPC5200 Fast Ethernet Controller
*
/*
- * drivers/net/gianfar.c
+ * drivers/net/ethernet/freescale/gianfar.c
*
* Gianfar Ethernet Driver
* This driver is designed for the non-CPM ethernet controllers
/*
- * drivers/net/gianfar.h
+ * drivers/net/ethernet/freescale/gianfar.h
*
* Gianfar Ethernet Driver
* Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
/*
- * drivers/net/gianfar_ethtool.c
+ * drivers/net/ethernet/freescale/gianfar_ethtool.c
*
* Gianfar Ethernet Driver
* Ethtool support for Gianfar Enet
/*
- * drivers/net/gianfar_sysfs.c
+ * drivers/net/ethernet/freescale/gianfar_sysfs.c
*
* Gianfar Ethernet Driver
* This driver is designed for the non-CPM ethernet controllers
/*
- * linux/drivers/net/ehea/ehea.h
+ * linux/drivers/net/ethernet/ibm/ehea/ehea.h
*
* eHEA ethernet device driver for IBM eServer System p
*
/*
- * linux/drivers/net/ehea/ehea_ethtool.c
+ * linux/drivers/net/ethernet/ibm/ehea/ehea_ethtool.c
*
* eHEA ethernet device driver for IBM eServer System p
*
/*
- * linux/drivers/net/ehea/ehea_hw.h
+ * linux/drivers/net/ethernet/ibm/ehea/ehea_hw.h
*
* eHEA ethernet device driver for IBM eServer System p
*
/*
- * linux/drivers/net/ehea/ehea_main.c
+ * linux/drivers/net/ethernet/ibm/ehea/ehea_main.c
*
* eHEA ethernet device driver for IBM eServer System p
*
/*
- * linux/drivers/net/ehea/ehea_phyp.c
+ * linux/drivers/net/ethernet/ibm/ehea/ehea_phyp.c
*
* eHEA ethernet device driver for IBM eServer System p
*
/*
- * linux/drivers/net/ehea/ehea_phyp.h
+ * linux/drivers/net/ethernet/ibm/ehea/ehea_phyp.h
*
* eHEA ethernet device driver for IBM eServer System p
*
/*
- * linux/drivers/net/ehea/ehea_qmr.c
+ * linux/drivers/net/ethernet/ibm/ehea/ehea_qmr.c
*
* eHEA ethernet device driver for IBM eServer System p
*
/*
- * linux/drivers/net/ehea/ehea_qmr.h
+ * linux/drivers/net/ethernet/ibm/ehea/ehea_qmr.h
*
* eHEA ethernet device driver for IBM eServer System p
*
/*
- * drivers/net/ibm_newemac/core.c
+ * drivers/net/ethernet/ibm/emac/core.c
*
* Driver for PowerPC 4xx on-chip ethernet controller.
*
/*
- * drivers/net/ibm_newemac/core.h
+ * drivers/net/ethernet/ibm/emac/core.h
*
* Driver for PowerPC 4xx on-chip ethernet controller.
*
/*
- * drivers/net/ibm_newemac/debug.c
+ * drivers/net/ethernet/ibm/emac/debug.c
*
* Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
*
/*
- * drivers/net/ibm_newemac/debug.h
+ * drivers/net/ethernet/ibm/emac/debug.h
*
* Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
*
/*
- * drivers/net/ibm_newemac/emac.h
+ * drivers/net/ethernet/ibm/emac/emac.h
*
* Register definitions for PowerPC 4xx on-chip ethernet contoller
*
/*
- * drivers/net/ibm_newemac/mal.c
+ * drivers/net/ethernet/ibm/emac/mal.c
*
* Memory Access Layer (MAL) support
*
/*
- * drivers/net/ibm_newemac/mal.h
+ * drivers/net/ethernet/ibm/emac/mal.h
*
* Memory Access Layer (MAL) support
*
/*
- * drivers/net/ibm_newemac/phy.c
+ * drivers/net/ethernet/ibm/emac/phy.c
*
* Driver for PowerPC 4xx on-chip ethernet controller, PHY support.
* Borrowed from sungem_phy.c, though I only kept the generic MII
/*
- * drivers/net/ibm_newemac/phy.h
+ * drivers/net/ethernet/ibm/emac/phy.h
*
* Driver for PowerPC 4xx on-chip ethernet controller, PHY support
*
/*
- * drivers/net/ibm_newemac/rgmii.c
+ * drivers/net/ethernet/ibm/emac/rgmii.c
*
* Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
*
/*
- * drivers/net/ibm_newemac/rgmii.h
+ * drivers/net/ethernet/ibm/emac/rgmii.h
*
* Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
*
/*
- * drivers/net/ibm_newemac/tah.c
+ * drivers/net/ethernet/ibm/emac/tah.c
*
* Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
*
/*
- * drivers/net/ibm_newemac/tah.h
+ * drivers/net/ethernet/ibm/emac/tah.h
*
* Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
*
/*
- * drivers/net/ibm_newemac/zmii.c
+ * drivers/net/ethernet/ibm/emac/zmii.c
*
* Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
*
/*
- * drivers/net/ibm_newemac/zmii.h
+ * drivers/net/ethernet/ibm/emac/zmii.h
*
* Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
*
-/* drivers/net/ks8851.c
+/* drivers/net/ethernet/micrel/ks8851.c
*
* Copyright 2009 Simtec Electronics
* http://www.simtec.co.uk/
-/* drivers/net/ks8851.h
+/* drivers/net/ethernet/micrel/ks8851.h
*
* Copyright 2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
/**
- * drivers/net/ks8851_mll.c
+ * drivers/net/ethernet/micrel/ks8851_mll.c
* Copyright (c) 2009 Micrel Inc.
*
* This program is free software; you can redistribute it and/or modify
/**
- * drivers/net/ksx884x.c - Micrel KSZ8841/2 PCI Ethernet driver
+ * drivers/net/ethernet/micrel/ksx884x.c - Micrel KSZ8841/2 PCI Ethernet driver
*
* Copyright (c) 2009-2010 Micrel, Inc.
* Tristram Ha <Tristram.Ha@micrel.com>
/*
- * drivers/net/netx-eth.c
+ * drivers/net/ethernet/netx-eth.c
*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
select CRC32
---help---
This is a network (Ethernet) device which attaches to your parallel
- port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>, if you
- want to use this. If you intend to use this driver, you should have
- said N to the "Parallel printer support", because the two drivers
- don't like each other.
+ port. Read <file:drivers/net/ethernet/realtek/atp.c> as well as the
+ Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>,
+ if you want to use this. If you intend to use this driver, you
+ should have said N to the "Parallel printer support", because the two
+ drivers don't like each other.
To compile this driver as a module, choose M here: the module
will be called atp.