sas_dump.o \
sas_discover.o \
sas_expander.o \
- sas_scsi_host.o
+ sas_scsi_host.o \
+ sas_ata.o
--- /dev/null
+/*
+ * Support for SATA devices on Serial Attached SCSI (SAS) controllers
+ *
+ * Copyright (C) 2006 IBM Corporation
+ *
+ * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <scsi/sas_ata.h>
+#include "sas_internal.h"
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
+{
+ /* Cheesy attempt to translate SAS errors into ATA. Hah! */
+
+ /* transport error */
+ if (ts->resp == SAS_TASK_UNDELIVERED)
+ return AC_ERR_ATA_BUS;
+
+ /* ts->resp == SAS_TASK_COMPLETE */
+ /* task delivered, what happened afterwards? */
+ switch (ts->stat) {
+ case SAS_DEV_NO_RESPONSE:
+ return AC_ERR_TIMEOUT;
+
+ case SAS_INTERRUPTED:
+ case SAS_PHY_DOWN:
+ case SAS_NAK_R_ERR:
+ return AC_ERR_ATA_BUS;
+
+
+ case SAS_DATA_UNDERRUN:
+ /*
+ * Some programs that use the taskfile interface
+ * (smartctl in particular) can cause underrun
+ * problems. Ignore these errors, perhaps at our
+ * peril.
+ */
+ return 0;
+
+ case SAS_DATA_OVERRUN:
+ case SAS_QUEUE_FULL:
+ case SAS_DEVICE_UNKNOWN:
+ case SAS_SG_ERR:
+ return AC_ERR_INVALID;
+
+ case SAM_CHECK_COND:
+ case SAS_OPEN_TO:
+ case SAS_OPEN_REJECT:
+ SAS_DPRINTK("%s: Saw error %d. What to do?\n",
+ __FUNCTION__, ts->stat);
+ return AC_ERR_OTHER;
+
+ case SAS_ABORTED_TASK:
+ return AC_ERR_DEV;
+
+ case SAS_PROTO_RESPONSE:
+ /* This means the ending_fis has the error
+ * value; return 0 here to collect it */
+ return 0;
+ default:
+ return 0;
+ }
+}
+
+static void sas_ata_task_done(struct sas_task *task)
+{
+ struct ata_queued_cmd *qc = task->uldd_task;
+ struct domain_device *dev = qc->ap->private_data;
+ struct task_status_struct *stat = &task->task_status;
+ struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf;
+ enum ata_completion_errors ac;
+
+ if (stat->stat == SAS_PROTO_RESPONSE) {
+ ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf);
+ qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command);
+ dev->sata_dev.sstatus = resp->sstatus;
+ dev->sata_dev.serror = resp->serror;
+ dev->sata_dev.scontrol = resp->scontrol;
+ dev->sata_dev.ap->sactive = resp->sactive;
+ } else if (stat->stat != SAM_STAT_GOOD) {
+ ac = sas_to_ata_err(stat);
+ if (ac) {
+ SAS_DPRINTK("%s: SAS error %x\n", __FUNCTION__,
+ stat->stat);
+ /* We saw a SAS error. Send a vague error. */
+ qc->err_mask = ac;
+ dev->sata_dev.tf.feature = 0x04; /* status err */
+ dev->sata_dev.tf.command = ATA_ERR;
+ }
+ }
+
+ ata_qc_complete(qc);
+ list_del_init(&task->list);
+ sas_free_task(task);
+}
+
+static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
+{
+ int res = -ENOMEM;
+ struct sas_task *task;
+ struct domain_device *dev = qc->ap->private_data;
+ struct sas_ha_struct *sas_ha = dev->port->ha;
+ struct Scsi_Host *host = sas_ha->core.shost;
+ struct sas_internal *i = to_sas_internal(host->transportt);
+ struct scatterlist *sg;
+ unsigned int num = 0;
+ unsigned int xfer = 0;
+
+ task = sas_alloc_task(GFP_ATOMIC);
+ if (!task)
+ goto out;
+ task->dev = dev;
+ task->task_proto = SAS_PROTOCOL_STP;
+ task->task_done = sas_ata_task_done;
+
+ if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+ qc->tf.command == ATA_CMD_FPDMA_READ) {
+ /* Need to zero out the tag libata assigned us */
+ qc->tf.nsect = 0;
+ }
+
+ ata_tf_to_fis(&qc->tf, (u8*)&task->ata_task.fis, 0);
+ task->uldd_task = qc;
+ if (is_atapi_taskfile(&qc->tf)) {
+ memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
+ task->total_xfer_len = qc->nbytes + qc->pad_len;
+ task->num_scatter = qc->pad_len ? qc->n_elem + 1 : qc->n_elem;
+ } else {
+ ata_for_each_sg(sg, qc) {
+ num++;
+ xfer += sg->length;
+ }
+
+ task->total_xfer_len = xfer;
+ task->num_scatter = num;
+ }
+
+ task->data_dir = qc->dma_dir;
+ task->scatter = qc->__sg;
+ task->ata_task.retry_count = 1;
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+
+ switch (qc->tf.protocol) {
+ case ATA_PROT_NCQ:
+ task->ata_task.use_ncq = 1;
+ /* fall through */
+ case ATA_PROT_ATAPI_DMA:
+ case ATA_PROT_DMA:
+ task->ata_task.dma_xfer = 1;
+ break;
+ }
+
+ if (sas_ha->lldd_max_execute_num < 2)
+ res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
+ else
+ res = sas_queue_up(task);
+
+ /* Examine */
+ if (res) {
+ SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
+
+ sas_free_task(task);
+ if (res == -SAS_QUEUE_FULL)
+ return -ENOMEM;
+ }
+
+out:
+ return res;
+}
+
+static u8 sas_ata_check_status(struct ata_port *ap)
+{
+ struct domain_device *dev = ap->private_data;
+ return dev->sata_dev.tf.command;
+}
+
+static void sas_ata_phy_reset(struct ata_port *ap)
+{
+ struct domain_device *dev = ap->private_data;
+ struct sas_internal *i =
+ to_sas_internal(dev->port->ha->core.shost->transportt);
+ int res = 0;
+
+ if (i->dft->lldd_I_T_nexus_reset)
+ res = i->dft->lldd_I_T_nexus_reset(dev);
+
+ if (res)
+ SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __FUNCTION__);
+
+ switch (dev->sata_dev.command_set) {
+ case ATA_COMMAND_SET:
+ SAS_DPRINTK("%s: Found ATA device.\n", __FUNCTION__);
+ ap->device[0].class = ATA_DEV_ATA;
+ break;
+ case ATAPI_COMMAND_SET:
+ SAS_DPRINTK("%s: Found ATAPI device.\n", __FUNCTION__);
+ ap->device[0].class = ATA_DEV_ATAPI;
+ break;
+ default:
+ SAS_DPRINTK("%s: Unknown SATA command set: %d.\n",
+ __FUNCTION__,
+ dev->sata_dev.command_set);
+ ap->device[0].class = ATA_DEV_ATA;
+ break;
+ }
+
+ ap->cbl = ATA_CBL_SATA;
+}
+
+static void sas_ata_post_internal(struct ata_queued_cmd *qc)
+{
+ if (qc->flags & ATA_QCFLAG_FAILED)
+ qc->err_mask |= AC_ERR_OTHER;
+
+ if (qc->err_mask)
+ SAS_DPRINTK("%s: Failure; reset phy!\n", __FUNCTION__);
+}
+
+static void sas_ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct domain_device *dev = ap->private_data;
+ memcpy(tf, &dev->sata_dev.tf, sizeof (*tf));
+}
+
+static void sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
+ u32 val)
+{
+ struct domain_device *dev = ap->private_data;
+
+ SAS_DPRINTK("STUB %s\n", __FUNCTION__);
+ switch (sc_reg_in) {
+ case SCR_STATUS:
+ dev->sata_dev.sstatus = val;
+ break;
+ case SCR_CONTROL:
+ dev->sata_dev.scontrol = val;
+ break;
+ case SCR_ERROR:
+ dev->sata_dev.serror = val;
+ break;
+ case SCR_ACTIVE:
+ dev->sata_dev.ap->sactive = val;
+ break;
+ }
+}
+
+static u32 sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in)
+{
+ struct domain_device *dev = ap->private_data;
+
+ SAS_DPRINTK("STUB %s\n", __FUNCTION__);
+ switch (sc_reg_in) {
+ case SCR_STATUS:
+ return dev->sata_dev.sstatus;
+ case SCR_CONTROL:
+ return dev->sata_dev.scontrol;
+ case SCR_ERROR:
+ return dev->sata_dev.serror;
+ case SCR_ACTIVE:
+ return dev->sata_dev.ap->sactive;
+ default:
+ return 0xffffffffU;
+ }
+}
+
+static struct ata_port_operations sas_sata_ops = {
+ .port_disable = ata_port_disable,
+ .check_status = sas_ata_check_status,
+ .check_altstatus = sas_ata_check_status,
+ .dev_select = ata_noop_dev_select,
+ .phy_reset = sas_ata_phy_reset,
+ .post_internal_cmd = sas_ata_post_internal,
+ .tf_read = sas_ata_tf_read,
+ .qc_prep = ata_noop_qc_prep,
+ .qc_issue = sas_ata_qc_issue,
+ .port_start = ata_sas_port_start,
+ .port_stop = ata_sas_port_stop,
+ .scr_read = sas_ata_scr_read,
+ .scr_write = sas_ata_scr_write
+};
+
+static struct ata_port_info sata_port_info = {
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ,
+ .pio_mask = 0x1f, /* PIO0-4 */
+ .mwdma_mask = 0x07, /* MWDMA0-2 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &sas_sata_ops
+};
+
+int sas_ata_init_host_and_port(struct domain_device *found_dev,
+ struct scsi_target *starget)
+{
+ struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+ struct ata_port *ap;
+
+ ata_host_init(&found_dev->sata_dev.ata_host,
+ &ha->pcidev->dev,
+ sata_port_info.flags,
+ &sas_sata_ops);
+ ap = ata_sas_port_alloc(&found_dev->sata_dev.ata_host,
+ &sata_port_info,
+ shost);
+ if (!ap) {
+ SAS_DPRINTK("ata_sas_port_alloc failed.\n");
+ return -ENODEV;
+ }
+
+ ap->private_data = found_dev;
+ ap->cbl = ATA_CBL_SATA;
+ ap->scsi_host = shost;
+ found_dev->sata_dev.ap = ap;
+
+ return 0;
+}
#include <scsi/scsi_eh.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_sas.h>
+#include <scsi/sas_ata.h>
#include "../scsi_sas_internal.h"
#include "../scsi_transport_api.h"
#include "../scsi_priv.h"
return task;
}
-static int sas_queue_up(struct sas_task *task)
+int sas_queue_up(struct sas_task *task)
{
struct sas_ha_struct *sas_ha = task->dev->port->ha;
struct scsi_core *core = &sas_ha->core;
return 0;
}
-static inline int dev_is_sata(struct domain_device *dev)
-{
- return (dev->rphy->identify.target_port_protocols & SAS_PROTOCOL_SATA);
-}
-
/**
* sas_queuecommand -- Enqueue a command for processing
* @parameters: See SCSI Core documentation
return EH_NOT_HANDLED;
}
-
-static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
-{
- /* Cheesy attempt to translate SAS errors into ATA. Hah! */
-
- /* transport error */
- if (ts->resp == SAS_TASK_UNDELIVERED)
- return AC_ERR_ATA_BUS;
-
- /* ts->resp == SAS_TASK_COMPLETE */
- /* task delivered, what happened afterwards? */
- switch (ts->stat) {
- case SAS_DEV_NO_RESPONSE:
- return AC_ERR_TIMEOUT;
-
- case SAS_INTERRUPTED:
- case SAS_PHY_DOWN:
- case SAS_NAK_R_ERR:
- return AC_ERR_ATA_BUS;
-
-
- case SAS_DATA_UNDERRUN:
- /*
- * Some programs that use the taskfile interface
- * (smartctl in particular) can cause underrun
- * problems. Ignore these errors, perhaps at our
- * peril.
- */
- return 0;
-
- case SAS_DATA_OVERRUN:
- case SAS_QUEUE_FULL:
- case SAS_DEVICE_UNKNOWN:
- case SAS_SG_ERR:
- return AC_ERR_INVALID;
-
- case SAM_CHECK_COND:
- case SAS_OPEN_TO:
- case SAS_OPEN_REJECT:
- SAS_DPRINTK("%s: Saw error %d. What to do?\n",
- __FUNCTION__, ts->stat);
- return AC_ERR_OTHER;
-
- case SAS_ABORTED_TASK:
- return AC_ERR_DEV;
-
- case SAS_PROTO_RESPONSE:
- /* This means the ending_fis has the error
- * value; return 0 here to collect it */
- return 0;
- default:
- return 0;
- }
-}
-
-static void sas_ata_task_done(struct sas_task *task)
-{
- struct ata_queued_cmd *qc = task->uldd_task;
- struct domain_device *dev = qc->ap->private_data;
- struct task_status_struct *stat = &task->task_status;
- struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf;
- enum ata_completion_errors ac;
-
- if (stat->stat == SAS_PROTO_RESPONSE) {
- ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf);
- qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command);
- dev->sata_dev.sstatus = resp->sstatus;
- dev->sata_dev.serror = resp->serror;
- dev->sata_dev.scontrol = resp->scontrol;
- dev->sata_dev.ap->sactive = resp->sactive;
- } else if (stat->stat != SAM_STAT_GOOD) {
- ac = sas_to_ata_err(stat);
- if (ac) {
- SAS_DPRINTK("%s: SAS error %x\n", __FUNCTION__,
- stat->stat);
- /* We saw a SAS error. Send a vague error. */
- qc->err_mask = ac;
- dev->sata_dev.tf.feature = 0x04; /* status err */
- dev->sata_dev.tf.command = ATA_ERR;
- }
- }
-
- ata_qc_complete(qc);
- list_del_init(&task->list);
- sas_free_task(task);
-}
-
int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
struct domain_device *dev = sdev_to_domain_dev(sdev);
return -EINVAL;
}
-static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
-{
- int res = -ENOMEM;
- struct sas_task *task;
- struct domain_device *dev = qc->ap->private_data;
- struct sas_ha_struct *sas_ha = dev->port->ha;
- struct Scsi_Host *host = sas_ha->core.shost;
- struct sas_internal *i = to_sas_internal(host->transportt);
- struct scatterlist *sg;
- unsigned int num = 0;
- unsigned int xfer = 0;
-
- task = sas_alloc_task(GFP_ATOMIC);
- if (!task)
- goto out;
- task->dev = dev;
- task->task_proto = SAS_PROTOCOL_STP;
- task->task_done = sas_ata_task_done;
-
- if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
- qc->tf.command == ATA_CMD_FPDMA_READ) {
- /* Need to zero out the tag libata assigned us */
- qc->tf.nsect = 0;
- }
-
- ata_tf_to_fis(&qc->tf, (u8*)&task->ata_task.fis, 0);
- task->uldd_task = qc;
- if (is_atapi_taskfile(&qc->tf)) {
- memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
- task->total_xfer_len = qc->nbytes + qc->pad_len;
- task->num_scatter = qc->pad_len ? qc->n_elem + 1 : qc->n_elem;
- } else {
- ata_for_each_sg(sg, qc) {
- num++;
- xfer += sg->length;
- }
-
- task->total_xfer_len = xfer;
- task->num_scatter = num;
- }
-
- task->data_dir = qc->dma_dir;
- task->scatter = qc->__sg;
- task->ata_task.retry_count = 1;
- task->task_state_flags = SAS_TASK_STATE_PENDING;
-
- switch (qc->tf.protocol) {
- case ATA_PROT_NCQ:
- task->ata_task.use_ncq = 1;
- /* fall through */
- case ATA_PROT_ATAPI_DMA:
- case ATA_PROT_DMA:
- task->ata_task.dma_xfer = 1;
- break;
- }
-
- if (sas_ha->lldd_max_execute_num < 2)
- res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
- else
- res = sas_queue_up(task);
-
- /* Examine */
- if (res) {
- SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
-
- sas_free_task(task);
- if (res == -SAS_QUEUE_FULL)
- return -ENOMEM;
- }
-
-out:
- return res;
-}
-
-static u8 sas_ata_check_status(struct ata_port *ap)
-{
- struct domain_device *dev = ap->private_data;
- return dev->sata_dev.tf.command;
-}
-
-static void sas_ata_phy_reset(struct ata_port *ap)
-{
- struct domain_device *dev = ap->private_data;
- struct sas_internal *i =
- to_sas_internal(dev->port->ha->core.shost->transportt);
- int res = 0;
-
- if (i->dft->lldd_I_T_nexus_reset)
- res = i->dft->lldd_I_T_nexus_reset(dev);
-
- if (res)
- SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __FUNCTION__);
-
- switch (dev->sata_dev.command_set) {
- case ATA_COMMAND_SET:
- SAS_DPRINTK("%s: Found ATA device.\n", __FUNCTION__);
- ap->device[0].class = ATA_DEV_ATA;
- break;
- case ATAPI_COMMAND_SET:
- SAS_DPRINTK("%s: Found ATAPI device.\n", __FUNCTION__);
- ap->device[0].class = ATA_DEV_ATAPI;
- break;
- default:
- SAS_DPRINTK("%s: Unknown SATA command set: %d.\n",
- __FUNCTION__,
- dev->sata_dev.command_set);
- ap->device[0].class = ATA_DEV_ATA;
- break;
- }
-
- ap->cbl = ATA_CBL_SATA;
-}
-
-static void sas_ata_post_internal(struct ata_queued_cmd *qc)
-{
- if (qc->flags & ATA_QCFLAG_FAILED)
- qc->err_mask |= AC_ERR_OTHER;
-
- if (qc->err_mask)
- SAS_DPRINTK("%s: Failure; reset phy!\n", __FUNCTION__);
-}
-
-static void sas_ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
- struct domain_device *dev = ap->private_data;
- memcpy(tf, &dev->sata_dev.tf, sizeof (*tf));
-}
-
-static void sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
- u32 val)
-{
- struct domain_device *dev = ap->private_data;
-
- SAS_DPRINTK("STUB %s\n", __FUNCTION__);
- switch (sc_reg_in) {
- case SCR_STATUS:
- dev->sata_dev.sstatus = val;
- break;
- case SCR_CONTROL:
- dev->sata_dev.scontrol = val;
- break;
- case SCR_ERROR:
- dev->sata_dev.serror = val;
- break;
- case SCR_ACTIVE:
- dev->sata_dev.ap->sactive = val;
- break;
- }
-}
-
-static u32 sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in)
-{
- struct domain_device *dev = ap->private_data;
-
- SAS_DPRINTK("STUB %s\n", __FUNCTION__);
- switch (sc_reg_in) {
- case SCR_STATUS:
- return dev->sata_dev.sstatus;
- case SCR_CONTROL:
- return dev->sata_dev.scontrol;
- case SCR_ERROR:
- return dev->sata_dev.serror;
- case SCR_ACTIVE:
- return dev->sata_dev.ap->sactive;
- default:
- return 0xffffffffU;
- }
-}
-
-static struct ata_port_operations sas_sata_ops = {
- .port_disable = ata_port_disable,
- .check_status = sas_ata_check_status,
- .check_altstatus = sas_ata_check_status,
- .dev_select = ata_noop_dev_select,
- .phy_reset = sas_ata_phy_reset,
- .post_internal_cmd = sas_ata_post_internal,
- .tf_read = sas_ata_tf_read,
- .qc_prep = ata_noop_qc_prep,
- .qc_issue = sas_ata_qc_issue,
- .port_start = ata_sas_port_start,
- .port_stop = ata_sas_port_stop,
- .scr_read = sas_ata_scr_read,
- .scr_write = sas_ata_scr_write
-};
-
-static struct ata_port_info sata_port_info = {
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET |
- ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ,
- .pio_mask = 0x1f, /* PIO0-4 */
- .mwdma_mask = 0x07, /* MWDMA0-2 */
- .udma_mask = ATA_UDMA6,
- .port_ops = &sas_sata_ops
-};
-
struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy)
{
struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent);
int sas_target_alloc(struct scsi_target *starget)
{
- struct Scsi_Host *shost = dev_to_shost(&starget->dev);
- struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
struct domain_device *found_dev = sas_find_target(starget);
+ int res;
if (!found_dev)
return -ENODEV;
if (dev_is_sata(found_dev)) {
- struct ata_port *ap;
-
- ata_host_init(&found_dev->sata_dev.ata_host,
- &ha->pcidev->dev,
- sata_port_info.flags,
- &sas_sata_ops);
- ap = ata_sas_port_alloc(&found_dev->sata_dev.ata_host,
- &sata_port_info,
- shost);
- if (!ap) {
- SAS_DPRINTK("ata_sas_port_alloc failed.\n");
- return -ENODEV;
- }
-
- ap->private_data = found_dev;
- ap->cbl = ATA_CBL_SATA;
- ap->scsi_host = shost;
- found_dev->sata_dev.ap = ap;
+ res = sas_ata_init_host_and_port(found_dev, starget);
+ if (res)
+ return res;
}
starget->hostdata = found_dev;
struct sas_phy_linkrates *rates);
int sas_phy_enable(struct sas_phy *phy, int enabled);
int sas_phy_reset(struct sas_phy *phy, int hard_reset);
+int sas_queue_up(struct sas_task *task);
extern int sas_queuecommand(struct scsi_cmnd *,
void (*scsi_done)(struct scsi_cmnd *));
extern int sas_target_alloc(struct scsi_target *);
--- /dev/null
+/*
+ * Support for SATA devices on Serial Attached SCSI (SAS) controllers
+ *
+ * Copyright (C) 2006 IBM Corporation
+ *
+ * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_ATA_H_
+#define _SAS_ATA_H_
+
+#include <linux/libata.h>
+#include <scsi/libsas.h>
+
+static inline int dev_is_sata(struct domain_device *dev)
+{
+ return (dev->rphy->identify.target_port_protocols & SAS_PROTOCOL_SATA);
+}
+
+int sas_ata_init_host_and_port(struct domain_device *found_dev,
+ struct scsi_target *starget);
+
+#endif /* _SAS_ATA_H_ */
projects / openwrt / staging / blogic.git / commitdiff