# CONFIG_64BIT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_6PACK is not set
-# CONFIG_8139CP is not set
# CONFIG_9P_FS is not set
-# CONFIG_ACENIC is not set
# CONFIG_ACORN_PARTITION is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_AFS_FS is not set
-CONFIG_AIRO=m
-CONFIG_AIRO_CS=m
-# CONFIG_AMD8111_ETH is not set
# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_APPLICOM is not set
CONFIG_AR2313=y
CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCNET is not set
CONFIG_ARPD=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_ATA is not set
CONFIG_ATHEROS_AR5312=y
CONFIG_ATHEROS_AR5315=y
# CONFIG_ATM is not set
-CONFIG_ATMEL=m
-# CONFIG_ATM_AMBASSADOR is not set
-CONFIG_ATM_BR2684=m
-CONFIG_ATM_BR2684_IPFILTER=y
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
-CONFIG_ATM_DUMMY=m
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_LANAI is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-# CONFIG_ATM_NICSTAR is not set
-CONFIG_ATM_TCP=m
-# CONFIG_ATM_ZATM is not set
# CONFIG_AUDIT is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BAYCOM_SER_FDX is not set
# CONFIG_BAYCOM_SER_HDX is not set
-CONFIG_BCM43XX=m
-CONFIG_BCM43XX_DEBUG=y
-CONFIG_BCM43XX_DMA=y
-CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_DMA_MODE is not set
-CONFIG_BCM43XX_PIO=y
-# CONFIG_BCM43XX_PIO_MODE is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_SD=m
# CONFIG_BLK_DEV_SR is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLOCK=y
-# CONFIG_BNX2 is not set
CONFIG_BONDING=m
# CONFIG_BPQETHER is not set
CONFIG_BRIDGE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_BT is not set
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBFUSB=m
-# CONFIG_BT_HCIBLUECARD is not set
-CONFIG_BT_HCIBPA10X=m
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIDTL1 is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_HIDP=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_SCO=m
CONFIG_BUG=y
-CONFIG_CARDBUS=y
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_CASSINI is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CICADA_PHY is not set
CONFIG_CIFS=m
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
-CONFIG_CIFS_POSIX=y
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_WP512=m
-# CONFIG_DAVICOM_PHY is not set
# CONFIG_DDB5477 is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
-# CONFIG_DGRS is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_DL2K is not set
# CONFIG_DM9000 is not set
# CONFIG_DMA_ENGINE is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_DNOTIFY is not set
-# CONFIG_DRM is not set
# CONFIG_DTLK is not set
# CONFIG_DUMMY is not set
# CONFIG_DVB is not set
-CONFIG_E100=m
-# CONFIG_E1000 is not set
# CONFIG_ECONET is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_EFS_FS is not set
# CONFIG_ELF_CORE is not set
CONFIG_EMBEDDED=y
CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_EPIC100 is not set
CONFIG_EPOLL=y
# CONFIG_EQUALIZER is not set
CONFIG_EXPERIMENTAL=y
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_FS=m
# CONFIG_FB is not set
-# CONFIG_FDDI is not set
-# CONFIG_FEALNX is not set
CONFIG_FIB_RULES=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FLATMEM=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_FORCEDETH is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_FTL is not set
# CONFIG_FUSE_FS is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-# CONFIG_FUSION_SPI is not set
CONFIG_FUTEX=y
CONFIG_FW_LOADER=y
CONFIG_GACT_PROB=y
CONFIG_GENERIC_TIME=y
# CONFIG_GEN_RTC is not set
# CONFIG_GFS2_FS is not set
-# CONFIG_HAMACHI is not set
CONFIG_HAMRADIO=y
-# CONFIG_HAPPYMEAL is not set
CONFIG_HAVE_STD_PC_SERIAL_PORT=y
# CONFIG_HEADERS_CHECK is not set
-CONFIG_HERMES=m
CONFIG_HFSPLUS_FS=m
CONFIG_HFS_FS=m
-# CONFIG_HIPPI is not set
# CONFIG_HOSTAP is not set
-CONFIG_HOSTAP_CS=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PCI=m
-CONFIG_HOSTAP_PLX=m
CONFIG_HOTPLUG=y
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HP100 is not set
# CONFIG_HPFS_FS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_HWMON is not set
# CONFIG_HZ_256 is not set
# CONFIG_HZ_48 is not set
# CONFIG_I2C is not set
-# CONFIG_I2O is not set
-# CONFIG_I82092 is not set
# CONFIG_IDE is not set
-# CONFIG_IEEE1394 is not set
# CONFIG_IEEE80211 is not set
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_IFB=m
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_TUNNEL=m
-# CONFIG_INFINIBAND is not set
# CONFIG_INFTL is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_INPUT is not set
-# CONFIG_INPUT_EVBUG is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MISC is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IPV6_ROUTE_INFO is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_TUNNEL is not set
-CONFIG_IPW2100=m
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2100_MONITOR=y
-CONFIG_IPW2200=m
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_IPW2200_MONITOR=y
-# CONFIG_IPW2200_PROMISCUOUS is not set
-# CONFIG_IPW2200_QOS is not set
-# CONFIG_IPW2200_RADIOTAP is not set
# CONFIG_IPX is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_DCCP=m
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISDN is not set
CONFIG_ISO9660_FS=m
-# CONFIG_IXGB is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_LOCKD_V4=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_LSF is not set
-# CONFIG_LXT_PHY is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_VR41XX is not set
CONFIG_MAC_PARTITION=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_MARKEINS is not set
-# CONFIG_MARVELL_PHY is not set
# CONFIG_MD is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_SAS is not set
CONFIG_MII=y
CONFIG_MINIX_FS=m
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_SPIFLASH=y
-# CONFIG_MYRI10GE is not set
+CONFIG_MTD_SPLIT_ROOTFS=y
# CONFIG_NCP_FS is not set
CONFIG_NET=y
# CONFIG_NETCONSOLE is not set
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_IND=y
-CONFIG_NET_CLS_POLICE=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_ETHERNET=y
-# CONFIG_NET_FC is not set
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_NET_IPIP=m
CONFIG_NET_KEY=m
-CONFIG_NET_PCI=y
-# CONFIG_NET_PCMCIA is not set
CONFIG_NET_PKTGEN=m
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_NET_RADIO=y
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_CBQ=m
# CONFIG_NET_SCH_CLK_CPU is not set
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_TEQL=m
-# CONFIG_NET_TULIP is not set
CONFIG_NET_WIRELESS=y
CONFIG_NET_WIRELESS_RTNETLINK=y
CONFIG_NEW_LEDS=y
CONFIG_NLS_KOI8_R=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-CONFIG_NORTEL_HERMES=m
-# CONFIG_NS83820 is not set
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_FS=m
CONFIG_NTFS_RW=y
# CONFIG_PARPORT is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_PCCARD is not set
-CONFIG_PCCARD_NONSTATIC=m
-CONFIG_PCI=y
-CONFIG_PCI_ATMEL=m
-CONFIG_PCI_HERMES=m
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_PCMCIA_IOCTL is not set
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PCNET32 is not set
-# CONFIG_PD6729 is not set
# CONFIG_PHONE is not set
# CONFIG_PHYLIB is not set
CONFIG_PLIST=y
-CONFIG_PLX_HERMES=m
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_PPP=m
-CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_PRINTK=y
# CONFIG_PRINTK_TIME is not set
-CONFIG_PRISM54=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
# CONFIG_PROFILING is not set
# CONFIG_QEMU is not set
-# CONFIG_QLA3XXX is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_R3964 is not set
-# CONFIG_R8169 is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RAID_ATTRS is not set
CONFIG_RAMFS=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_RTC_CLASS is not set
CONFIG_RT_MUTEXES=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_S2IO is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_SCSI=m
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_PROC_FS=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SECURITY is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_SERIO is not set
-# CONFIG_SGI_IOC4 is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
CONFIG_SLAB=y
CONFIG_SLHC=m
# CONFIG_SLIP is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_SND=m
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-CONFIG_SND_HWDEP=m
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_MIXART is not set
CONFIG_SND_MIXER_OSS=m
-# CONFIG_SND_MONA is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_NM256 is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_PCM=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_PDAUDIOCF is not set
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_TIMER=m
-# CONFIG_SND_TRIDENT is not set
-CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_YMFPCI is not set
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_STANDALONE=y
# CONFIG_STRIP is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNGEM is not set
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUN_PARTITION is not set
CONFIG_SWAP=y
-# CONFIG_SYNCLINK_CS is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_SYSCTL=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_TEXTSEARCH_FSM=m
CONFIG_TEXTSEARCH_KMP=m
# CONFIG_TIFM_CORE is not set
-# CONFIG_TIGON3 is not set
# CONFIG_TINY_SHMEM is not set
# CONFIG_TIPC is not set
-# CONFIG_TLAN is not set
-CONFIG_TMD_HERMES=m
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_TR is not set
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRAD_SIGNALS=y
CONFIG_TUN=m
CONFIG_UNIX98_PTYS=y
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_USB=m
-# CONFIG_USB_ACECAD is not set
-CONFIG_USB_ACM=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AIPTEK is not set
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-CONFIG_USB_ATM=m
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_BANDWIDTH is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_CATC=m
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EPSON2888 is not set
-CONFIG_USB_EZUSB=y
-# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_GADGET is not set
-# CONFIG_USB_HID is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_KAWETH=m
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LIBUSUAL is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-# CONFIG_USB_OHCI_HCD is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_OTG is not set
-CONFIG_USB_PEGASUS=m
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_POWERMATE is not set
-CONFIG_USB_PRINTER=m
-# CONFIG_USB_RIO500 is not set
-CONFIG_USB_RTL8150=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_AIRPRIME=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CP2101=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_SL811_HCD is not set
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_ALAUDA=y
-CONFIG_USB_STORAGE_DATAFAB=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_KARMA=y
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_USBAT=y
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-CONFIG_USB_UEAGLEATM=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_USBNET_MII=m
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_XUSBATM is not set
-# CONFIG_USB_YEALINK is not set
-CONFIG_USB_ZD1201=m
# CONFIG_UTS_NS is not set
CONFIG_VFAT_FS=m
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VITESSE_PHY is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_VT is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
-# CONFIG_WDTPCI is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_WR_PPMC is not set
# CONFIG_X25 is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_YAM is not set
-# CONFIG_YELLOWFIN is not set
-CONFIG_YENTA=m
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_ZLIB_DEFLATE=y
--- /dev/null
+diff -ur linux.old/drivers/mtd/Kconfig linux.dev/drivers/mtd/Kconfig
+--- linux.old/drivers/mtd/Kconfig 2007-01-10 20:10:37.000000000 +0100
++++ linux.dev/drivers/mtd/Kconfig 2007-02-19 23:00:53.739457000 +0100
+@@ -49,6 +49,11 @@
+ devices. Partitioning on NFTL 'devices' is a different - that's the
+ 'normal' form of partitioning used on a block device.
+
++config MTD_SPLIT_ROOTFS
++ bool "Automatically split rootfs partition for squashfs"
++ depends on MTD_PARTITIONS
++ default y
++
+ config MTD_REDBOOT_PARTS
+ tristate "RedBoot partition table parsing"
+ depends on MTD_PARTITIONS
+diff -ur linux.old/drivers/mtd/mtdpart.c linux.dev/drivers/mtd/mtdpart.c
+--- linux.old/drivers/mtd/mtdpart.c 2007-01-10 20:10:37.000000000 +0100
++++ linux.dev/drivers/mtd/mtdpart.c 2007-02-20 00:01:38.587355896 +0100
+@@ -20,6 +20,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/squashfs_fs.h>
++#include <linux/root_dev.h>
+
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+@@ -303,6 +305,173 @@
+ return 0;
+ }
+
++static u_int32_t cur_offset = 0;
++static int add_mtd_partition(struct mtd_info *master, const struct mtd_partition *part, int i)
++{
++ struct mtd_part *slave;
++
++ /* allocate the partition structure */
++ slave = kmalloc (sizeof(*slave), GFP_KERNEL);
++ if (!slave) {
++ printk ("memory allocation error while creating partitions for \"%s\"\n",
++ master->name);
++ del_mtd_partitions(master);
++ return -ENOMEM;
++ }
++ memset(slave, 0, sizeof(*slave));
++ list_add(&slave->list, &mtd_partitions);
++
++ /* set up the MTD object for this partition */
++ slave->mtd.type = master->type;
++ slave->mtd.flags = master->flags & ~part->mask_flags;
++ slave->mtd.size = part->size;
++ slave->mtd.writesize = master->writesize;
++ slave->mtd.oobsize = master->oobsize;
++ slave->mtd.ecctype = master->ecctype;
++ slave->mtd.eccsize = master->eccsize;
++
++ slave->mtd.name = part->name;
++ slave->mtd.bank_size = master->bank_size;
++ slave->mtd.owner = master->owner;
++
++ slave->mtd.read = part_read;
++ slave->mtd.write = part_write;
++
++ if(master->point && master->unpoint){
++ slave->mtd.point = part_point;
++ slave->mtd.unpoint = part_unpoint;
++ }
++
++ if (master->read_oob)
++ slave->mtd.read_oob = part_read_oob;
++ if (master->write_oob)
++ slave->mtd.write_oob = part_write_oob;
++ if(master->read_user_prot_reg)
++ slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
++ if(master->read_fact_prot_reg)
++ slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
++ if(master->write_user_prot_reg)
++ slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
++ if(master->lock_user_prot_reg)
++ slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
++ if(master->get_user_prot_info)
++ slave->mtd.get_user_prot_info = part_get_user_prot_info;
++ if(master->get_fact_prot_info)
++ slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
++ if (master->sync)
++ slave->mtd.sync = part_sync;
++ if (!i && master->suspend && master->resume) {
++ slave->mtd.suspend = part_suspend;
++ slave->mtd.resume = part_resume;
++ }
++ if (master->writev)
++ slave->mtd.writev = part_writev;
++ if (master->lock)
++ slave->mtd.lock = part_lock;
++ if (master->unlock)
++ slave->mtd.unlock = part_unlock;
++ if (master->block_isbad)
++ slave->mtd.block_isbad = part_block_isbad;
++ if (master->block_markbad)
++ slave->mtd.block_markbad = part_block_markbad;
++ slave->mtd.erase = part_erase;
++ slave->master = master;
++ slave->offset = part->offset;
++ slave->index = i;
++
++ if (slave->offset == MTDPART_OFS_APPEND)
++ slave->offset = cur_offset;
++ if (slave->offset == MTDPART_OFS_NXTBLK) {
++ slave->offset = cur_offset;
++ if ((cur_offset % master->erasesize) != 0) {
++ /* Round up to next erasesize */
++ slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize;
++ printk(KERN_NOTICE "Moving partition %d: "
++ "0x%08x -> 0x%08x\n", i,
++ cur_offset, slave->offset);
++ }
++ }
++ if (slave->mtd.size == MTDPART_SIZ_FULL)
++ slave->mtd.size = master->size - slave->offset;
++ cur_offset = slave->offset + slave->mtd.size;
++
++ printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
++ slave->offset + slave->mtd.size, slave->mtd.name);
++
++ /* let's do some sanity checks */
++ if (slave->offset >= master->size) {
++ /* let's register it anyway to preserve ordering */
++ slave->offset = 0;
++ slave->mtd.size = 0;
++ printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
++ part->name);
++ }
++ if (slave->offset + slave->mtd.size > master->size) {
++ slave->mtd.size = master->size - slave->offset;
++ printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
++ part->name, master->name, slave->mtd.size);
++ }
++ if (master->numeraseregions>1) {
++ /* Deal with variable erase size stuff */
++ int i;
++ struct mtd_erase_region_info *regions = master->eraseregions;
++
++ /* Find the first erase regions which is part of this partition. */
++ for (i=0; i < master->numeraseregions && slave->offset >= regions[i].offset; i++)
++ ;
++
++ for (i--; i < master->numeraseregions && slave->offset + slave->mtd.size > regions[i].offset; i++) {
++ if (slave->mtd.erasesize < regions[i].erasesize) {
++ slave->mtd.erasesize = regions[i].erasesize;
++ }
++ }
++ } else {
++ /* Single erase size */
++ slave->mtd.erasesize = master->erasesize;
++ }
++
++ if ((slave->mtd.flags & MTD_WRITEABLE) &&
++ (slave->offset % slave->mtd.erasesize)) {
++ /* Doesn't start on a boundary of major erase size */
++ /* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
++ slave->mtd.flags &= ~MTD_WRITEABLE;
++ printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
++ part->name);
++ }
++ if ((slave->mtd.flags & MTD_WRITEABLE) &&
++ (slave->mtd.size % slave->mtd.erasesize)) {
++ slave->mtd.flags &= ~MTD_WRITEABLE;
++ printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
++ part->name);
++ }
++
++ slave->mtd.ecclayout = master->ecclayout;
++ if (master->block_isbad) {
++ uint32_t offs = 0;
++
++ while(offs < slave->mtd.size) {
++ if (master->block_isbad(master,
++ offs + slave->offset))
++ slave->mtd.ecc_stats.badblocks++;
++ offs += slave->mtd.erasesize;
++ }
++ }
++
++ if(part->mtdp)
++ { /* store the object pointer (caller may or may not register it */
++ *part->mtdp = &slave->mtd;
++ slave->registered = 0;
++ }
++ else
++ {
++ /* register our partition */
++ add_mtd_device(&slave->mtd);
++ slave->registered = 1;
++ }
++
++ return 0;
++}
++
+ /*
+ * This function, given a master MTD object and a partition table, creates
+ * and registers slave MTD objects which are bound to the master according to
+@@ -314,171 +483,53 @@
+ const struct mtd_partition *parts,
+ int nbparts)
+ {
+- struct mtd_part *slave;
+- u_int32_t cur_offset = 0;
+- int i;
++ struct mtd_partition *part;
++ int i, ret = 0;
+
+ printk (KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+
+ for (i = 0; i < nbparts; i++) {
++ part = (struct mtd_partition *) &parts[i];
++ ret = add_mtd_partition(master, part, i);
++ if (ret)
++ return ret;
++ if (strcmp(part->name, "rootfs") == 0) {
++#ifdef CONFIG_MTD_SPLIT_ROOTFS
++ int len;
++ char buf[512];
++ struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++ if ((master->read(master, part->offset, sizeof(struct squashfs_super_block), &len, buf) == 0) &&
++ (len == sizeof(struct squashfs_super_block)) &&
++ (*((u32 *) buf) == SQUASHFS_MAGIC) &&
++ (sb->bytes_used > 0)) {
++
++
++ part = kmalloc(sizeof(struct mtd_partition), GFP_KERNEL);
++ memcpy(part, &parts[i], sizeof(struct mtd_partition));
++
++ part->name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++ strcpy(part->name, ROOTFS_SPLIT_NAME);
++
++ len = (u32) sb->bytes_used;
++ len += (part->offset & 0x000fffff);
++ len += (master->erasesize - 1);
++ len &= ~(master->erasesize - 1);
++ len -= (part->offset & 0x000fffff);
++ part->offset += len;
++ part->size -= len;
++
++ if (len + master->erasesize < part->size)
++ ret = add_mtd_partition(master, part, i + 1);
++ else
++ kfree(part->name);
++ if (ret)
++ return ret;
+
+- /* allocate the partition structure */
+- slave = kmalloc (sizeof(*slave), GFP_KERNEL);
+- if (!slave) {
+- printk ("memory allocation error while creating partitions for \"%s\"\n",
+- master->name);
+- del_mtd_partitions(master);
+- return -ENOMEM;
+- }
+- memset(slave, 0, sizeof(*slave));
+- list_add(&slave->list, &mtd_partitions);
+-
+- /* set up the MTD object for this partition */
+- slave->mtd.type = master->type;
+- slave->mtd.flags = master->flags & ~parts[i].mask_flags;
+- slave->mtd.size = parts[i].size;
+- slave->mtd.writesize = master->writesize;
+- slave->mtd.oobsize = master->oobsize;
+- slave->mtd.ecctype = master->ecctype;
+- slave->mtd.eccsize = master->eccsize;
+-
+- slave->mtd.name = parts[i].name;
+- slave->mtd.bank_size = master->bank_size;
+- slave->mtd.owner = master->owner;
+-
+- slave->mtd.read = part_read;
+- slave->mtd.write = part_write;
+-
+- if(master->point && master->unpoint){
+- slave->mtd.point = part_point;
+- slave->mtd.unpoint = part_unpoint;
+- }
+-
+- if (master->read_oob)
+- slave->mtd.read_oob = part_read_oob;
+- if (master->write_oob)
+- slave->mtd.write_oob = part_write_oob;
+- if(master->read_user_prot_reg)
+- slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
+- if(master->read_fact_prot_reg)
+- slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
+- if(master->write_user_prot_reg)
+- slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
+- if(master->lock_user_prot_reg)
+- slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
+- if(master->get_user_prot_info)
+- slave->mtd.get_user_prot_info = part_get_user_prot_info;
+- if(master->get_fact_prot_info)
+- slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
+- if (master->sync)
+- slave->mtd.sync = part_sync;
+- if (!i && master->suspend && master->resume) {
+- slave->mtd.suspend = part_suspend;
+- slave->mtd.resume = part_resume;
+- }
+- if (master->writev)
+- slave->mtd.writev = part_writev;
+- if (master->lock)
+- slave->mtd.lock = part_lock;
+- if (master->unlock)
+- slave->mtd.unlock = part_unlock;
+- if (master->block_isbad)
+- slave->mtd.block_isbad = part_block_isbad;
+- if (master->block_markbad)
+- slave->mtd.block_markbad = part_block_markbad;
+- slave->mtd.erase = part_erase;
+- slave->master = master;
+- slave->offset = parts[i].offset;
+- slave->index = i;
+-
+- if (slave->offset == MTDPART_OFS_APPEND)
+- slave->offset = cur_offset;
+- if (slave->offset == MTDPART_OFS_NXTBLK) {
+- slave->offset = cur_offset;
+- if ((cur_offset % master->erasesize) != 0) {
+- /* Round up to next erasesize */
+- slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize;
+- printk(KERN_NOTICE "Moving partition %d: "
+- "0x%08x -> 0x%08x\n", i,
+- cur_offset, slave->offset);
++ kfree(part);
+ }
+- }
+- if (slave->mtd.size == MTDPART_SIZ_FULL)
+- slave->mtd.size = master->size - slave->offset;
+- cur_offset = slave->offset + slave->mtd.size;
+-
+- printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
+- slave->offset + slave->mtd.size, slave->mtd.name);
+-
+- /* let's do some sanity checks */
+- if (slave->offset >= master->size) {
+- /* let's register it anyway to preserve ordering */
+- slave->offset = 0;
+- slave->mtd.size = 0;
+- printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
+- parts[i].name);
+- }
+- if (slave->offset + slave->mtd.size > master->size) {
+- slave->mtd.size = master->size - slave->offset;
+- printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
+- parts[i].name, master->name, slave->mtd.size);
+- }
+- if (master->numeraseregions>1) {
+- /* Deal with variable erase size stuff */
+- int i;
+- struct mtd_erase_region_info *regions = master->eraseregions;
+-
+- /* Find the first erase regions which is part of this partition. */
+- for (i=0; i < master->numeraseregions && slave->offset >= regions[i].offset; i++)
+- ;
+-
+- for (i--; i < master->numeraseregions && slave->offset + slave->mtd.size > regions[i].offset; i++) {
+- if (slave->mtd.erasesize < regions[i].erasesize) {
+- slave->mtd.erasesize = regions[i].erasesize;
+- }
+- }
+- } else {
+- /* Single erase size */
+- slave->mtd.erasesize = master->erasesize;
+- }
+-
+- if ((slave->mtd.flags & MTD_WRITEABLE) &&
+- (slave->offset % slave->mtd.erasesize)) {
+- /* Doesn't start on a boundary of major erase size */
+- /* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
+- slave->mtd.flags &= ~MTD_WRITEABLE;
+- printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+- parts[i].name);
+- }
+- if ((slave->mtd.flags & MTD_WRITEABLE) &&
+- (slave->mtd.size % slave->mtd.erasesize)) {
+- slave->mtd.flags &= ~MTD_WRITEABLE;
+- printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+- parts[i].name);
+- }
+-
+- slave->mtd.ecclayout = master->ecclayout;
+- if (master->block_isbad) {
+- uint32_t offs = 0;
+-
+- while(offs < slave->mtd.size) {
+- if (master->block_isbad(master,
+- offs + slave->offset))
+- slave->mtd.ecc_stats.badblocks++;
+- offs += slave->mtd.erasesize;
+- }
+- }
+-
+- if(parts[i].mtdp)
+- { /* store the object pointer (caller may or may not register it */
+- *parts[i].mtdp = &slave->mtd;
+- slave->registered = 0;
+- }
+- else
+- {
+- /* register our partition */
+- add_mtd_device(&slave->mtd);
+- slave->registered = 1;
++#endif /* CONFIG_MTD_SPLIT_ROOTFS */
++ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, i);
+ }
+ }
+
projects / openwrt / staging / thess.git / commitdiff