ramips: add support for YunCore AX820/HWAP-AX820

There are two versions which are identical apart from the enclosure:
  YunCore AX820: indoor ceiling mount AP with integrated antennas
  YunCore HWAP-AX820: outdoor enclosure with external (N) connectors

Hardware specs:
  SoC: MediaTek MT7621DAT
  Flash: 16 MiB SPI NOR
  RAM: 128MiB (DDR3, integrated)
  WiFi: MT7905DAN+MT7975DN 2.4/5GHz 2T2R 802.11ax
  Ethernet: 10/100/1000 Mbps x2 (WAN/PoE+LAN)
  LED: Status (green)
  Button: Reset
  Power: 802.11af/at PoE; DC 12V,1A
  Antennas: AX820(indoor): 4dBi internal; HWAP-AX820(outdoor): external

Flash instructions:
  The "OpenWRT support" version of the AX820 comes with a LEDE-based
  firmware with proprietary MTK drivers and a luci webinterface and
  ssh accessible under 192.168.1.1 on LAN; user root, no password.
  The sysupgrade.bin can be flashed using luci or sysupgrade via ssh,
  you will have to force the upgrade due to a different factory name.
  Remember: Do *not* preserve factory configuration!

MAC addresses as used by OEM firmware:
  use   address            source
  2g    44:D1:FA:*:0b      Factory 0x0004 (label)
  5g    46:D1:FA:*:0b      LAA of 2g
  lan   44:D1:FA:*:0c      Factory 0xe000
  wan   44:D1:FA:*:0d      Factory 0xe000 + 1
The wan MAC can also be found in 0xe006 but is not used by OEM dtb.

Due to different MAC handling in mt76 the LAA derived from lan is used
for 2g to prevent duplicate MACs when creating multiple interfaces.

Signed-off-by: Clemens Hopfer <openwrt@wireloss.net>
(cherry picked from commit 4891b865380e2b7f32acf0893df9c1ca9db8d4ea)
[switch to mtd-mac-address instead of nvmem-cells]

diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips
index 8d3ae88b481ee4faf34f62c6198c14d905bce422..3e358ec6ac40c622afb85bcf25182ac8e84d3477 100644 (file)
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -24,7 +24,8 @@ sitecom,wlr-4100-v1-002)
        ;;
 allnet,all0256n-4m|\
 allnet,all0256n-8m|\
-allnet,all5002)
+allnet,all5002|\
+yuncore,ax820)
        ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
        ;;
 ampedwireless,ally-00x19k|\

diff --git a/target/linux/ramips/dts/mt7621_yuncore_ax820.dts b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
new file mode 100644 (file)
index 0000000..9775ec3
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "yuncore,ax820", "mediatek,mt7621-soc";
+       model = "YunCore AX820";
+
+       aliases {
+               led-boot = &led_status_green;
+               led-failsafe = &led_status_green;
+               led-running = &led_status_green;
+               led-upgrade = &led_status_green;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_status_green: status_green {
+                       label = "green:status";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       watchdog {
+               compatible = "linux,wdt-gpio";
+               gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+               hw_algo = "toggle";
+               hw_margin_ms = <200>;
+               always-running;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <80000000>;
+               m25p,fast-read;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "Bootloader";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "Config";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       /* range 0x40000 to 0x50000 is empty in vendor
+                        * firmware, so we do not use it either
+                        */
+
+                       factory: partition@50000 {
+                               label = "Factory";
+                               reg = <0x50000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@90000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x90000 0xf70000>;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie1 {
+       wifi@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0>;
+       };
+};
+
+&gmac0 {
+       mtd-mac-address = <&factory 0xe000>;
+};
+
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "wan";
+                       mtd-mac-address = <&factory 0xe000>;
+                       mtd-mac-address-increment = <1>;
+               };
+
+               port@1 {
+                       status = "okay";
+                       label = "lan";
+               };
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "jtag", "wdt";
+               function = "gpio";
+       };
+};

diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 8ee2a020bb24c616a18cedf2cb8c3b5dfe2f8fc9..c62087d8708f91cb76906d28d63b6638d11b36cb 100644 (file)
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -1567,6 +1567,15 @@ define Device/youku_yk-l2
 endef
 TARGET_DEVICES += youku_yk-l2
 
+define Device/yuncore_ax820
+  $(Device/dsa-migration)
+  IMAGE_SIZE := 15808k
+  DEVICE_VENDOR := YunCore
+  DEVICE_MODEL := AX820
+  DEVICE_PACKAGES := kmod-mt7915e
+endef
+TARGET_DEVICES += yuncore_ax820
+
 define Device/zbtlink_zbt-we1326
   $(Device/dsa-migration)
   $(Device/uimage-lzma-loader)

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 4b44669b8496af47f6d9391fc0e0bdd2ed2504a6..4d081bed8cfd2a8dd89bb6ab3cd467cd801e0f49 100755 (executable)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -68,6 +68,7 @@ ramips_setup_interfaces()
        ubnt,edgerouter-x-sfp)
                ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
                ;;
+       yuncore,ax820|\
        zyxel,nr7101)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
@@ -157,6 +158,9 @@ ramips_setup_macs()
                wan_mac=$label_mac
                lan_mac=$(macaddr_add $label_mac 1)
                ;;
+       yuncore,ax820)
+               label_mac=$(mtd_get_mac_binary Factory 0x4)
+               ;;
        esac
 
        [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac

diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index bd0f0254c6c3fe22d4b6d8aa3d1d3d56730238f3..68ee537ae586d1f8af5fd423b6ca23d86b097b35 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -27,4 +27,8 @@ case "$board" in
                [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
                [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
                ;;
+       yuncore,ax820)
+               [ "$PHYNBR" = "1" ] && \
+                       macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress
+               ;;
 esac