--- /dev/null
+From bf2ef777f8ed0830be49b62167cc67d3be6abba6 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Tue, 22 Oct 2013 21:51:26 -0700
+Subject: [PATCH 3/3] ARM: dts: add Gateworks Ventana support
+
+The Gateworks Ventana product family consists of several baseboard designs
+based on the Freescale i.MX6 family of processors. Each baseboard has a
+different set of possible features.
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
+---
+ arch/arm/boot/dts/Makefile | 9 +
+ arch/arm/boot/dts/imx6dl-gw51xx.dts | 19 ++
+ arch/arm/boot/dts/imx6dl-gw52xx.dts | 19 ++
+ arch/arm/boot/dts/imx6dl-gw53xx.dts | 19 ++
+ arch/arm/boot/dts/imx6dl-gw54xx.dts | 19 ++
+ arch/arm/boot/dts/imx6q-gw51xx.dts | 19 ++
+ arch/arm/boot/dts/imx6q-gw52xx.dts | 23 ++
+ arch/arm/boot/dts/imx6q-gw53xx.dts | 23 ++
+ arch/arm/boot/dts/imx6q-gw5400-a.dts | 443 ++++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/imx6q-gw54xx.dts | 23 ++
+ arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 272 ++++++++++++++++++++
+ arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 373 +++++++++++++++++++++++++++
+ arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 429 +++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 457 ++++++++++++++++++++++++++++++++++
+ 14 files changed, 2147 insertions(+)
+ create mode 100644 arch/arm/boot/dts/imx6dl-gw51xx.dts
+ create mode 100644 arch/arm/boot/dts/imx6dl-gw52xx.dts
+ create mode 100644 arch/arm/boot/dts/imx6dl-gw53xx.dts
+ create mode 100644 arch/arm/boot/dts/imx6dl-gw54xx.dts
+ create mode 100644 arch/arm/boot/dts/imx6q-gw51xx.dts
+ create mode 100644 arch/arm/boot/dts/imx6q-gw52xx.dts
+ create mode 100644 arch/arm/boot/dts/imx6q-gw53xx.dts
+ create mode 100644 arch/arm/boot/dts/imx6q-gw5400-a.dts
+ create mode 100644 arch/arm/boot/dts/imx6q-gw54xx.dts
+ create mode 100644 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+ create mode 100644 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+ create mode 100644 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+ create mode 100644 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -136,10 +136,19 @@ dtb-$(CONFIG_ARCH_MXC) += \
+ imx53-mba53.dtb \
+ imx53-qsb.dtb \
+ imx53-smd.dtb \
++ imx6dl-gw51xx.dtb \
++ imx6dl-gw52xx.dtb \
++ imx6dl-gw53xx.dtb \
++ imx6dl-gw54xx.dtb \
+ imx6dl-sabreauto.dtb \
+ imx6dl-sabresd.dtb \
+ imx6dl-wandboard.dtb \
+ imx6q-arm2.dtb \
++ imx6q-gw51xx.dtb \
++ imx6q-gw52xx.dtb \
++ imx6q-gw53xx.dtb \
++ imx6q-gw5400-a.dtb \
++ imx6q-gw54xx.dtb \
+ imx6q-phytec-pbab01.dtb \
+ imx6q-sabreauto.dtb \
+ imx6q-sabrelite.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts
+@@ -0,0 +1,19 @@
++/*
++ * Copyright 2013 Gateworks Corporation
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++#include "imx6dl.dtsi"
++#include "imx6qdl-gw51xx.dtsi"
++
++/ {
++ model = "Gateworks Ventana i.MX6 DualLite GW51XX";
++ compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
+@@ -0,0 +1,19 @@
++/*
++ * Copyright 2013 Gateworks Corporation
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++#include "imx6dl.dtsi"
++#include "imx6qdl-gw52xx.dtsi"
++
++/ {
++ model = "Gateworks Ventana i.MX6 DualLite GW52XX";
++ compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
+@@ -0,0 +1,19 @@
++/*
++ * Copyright 2013 Gateworks Corporation
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++#include "imx6dl.dtsi"
++#include "imx6qdl-gw53xx.dtsi"
++
++/ {
++ model = "Gateworks Ventana i.MX6 DualLite GW53XX";
++ compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
+@@ -0,0 +1,19 @@
++/*
++ * Copyright 2013 Gateworks Corporation
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++#include "imx6dl.dtsi"
++#include "imx6qdl-gw54xx.dtsi"
++
++/ {
++ model = "Gateworks Ventana i.MX6 DualLite GW54XX";
++ compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
+@@ -0,0 +1,19 @@
++/*
++ * Copyright 2013 Gateworks Corporation
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++#include "imx6q.dtsi"
++#include "imx6qdl-gw54xx.dtsi"
++
++/ {
++ model = "Gateworks Ventana i.MX6 Quad GW51XX";
++ compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
+@@ -0,0 +1,23 @@
++/*
++ * Copyright 2013 Gateworks Corporation
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++#include "imx6q.dtsi"
++#include "imx6qdl-gw52xx.dtsi"
++
++/ {
++ model = "Gateworks Ventana i.MX6 Quad GW52XX";
++ compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
++};
++
++&sata {
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
+@@ -0,0 +1,23 @@
++/*
++ * Copyright 2013 Gateworks Corporation
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++#include "imx6q.dtsi"
++#include "imx6qdl-gw53xx.dtsi"
++
++/ {
++ model = "Gateworks Ventana i.MX6 Quad GW53XX";
++ compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
++};
++
++&sata {
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
+@@ -0,0 +1,443 @@
++/*
++ * Copyright 2013 Gateworks Corporation
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++#include "imx6q.dtsi"
++
++/ {
++ model = "Gateworks Ventana GW5400-A";
++ compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
++
++ /* these are used by bootloader for disabling nodes */
++ aliases {
++ ethernet0 = &fec;
++ ethernet1 = ð1;
++ i2c0 = &i2c1;
++ i2c1 = &i2c2;
++ i2c2 = &i2c3;
++ led0 = &led0;
++ led1 = &led1;
++ led2 = &led2;
++ sky2 = ð1;
++ ssi0 = &ssi1;
++ spi0 = &ecspi1;
++ usb0 = &usbh1;
++ usb1 = &usbotg;
++ usdhc2 = &usdhc3;
++ };
++
++ chosen {
++ bootargs = "console=ttymxc1,115200";
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led0: user1 {
++ label = "user1";
++ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
++ default-state = "on";
++ linux,default-trigger = "heartbeat";
++ };
++
++ led1: user2 {
++ label = "user2";
++ gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
++ default-state = "off";
++ };
++
++ led2: user3 {
++ label = "user3";
++ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
++ default-state = "off";
++ };
++ };
++
++ memory {
++ reg = <0x10000000 0x40000000>;
++ };
++
++ pps {
++ compatible = "pps-gpio";
++ gpios = <&gpio1 5 0>;
++ status = "okay";
++ };
++
++ regulators {
++ compatible = "simple-bus";
++
++ reg_1p0v: 1p0v {
++ compatible = "regulator-fixed";
++ regulator-name = "1P0V";
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1000000>;
++ regulator-always-on;
++ };
++
++ reg_3p3v: 3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "3P3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ reg_usb_h1_vbus: usb_h1_vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_h1_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-always-on;
++ };
++
++ reg_usb_otg_vbus: usb_otg_vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_otg_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio3 22 0>;
++ enable-active-high;
++ };
++ };
++
++ sound {
++ compatible = "fsl,imx6q-sabrelite-sgtl5000",
++ "fsl,imx-audio-sgtl5000";
++ model = "imx6q-sabrelite-sgtl5000";
++ ssi-controller = <&ssi1>;
++ audio-codec = <&codec>;
++ audio-routing =
++ "MIC_IN", "Mic Jack",
++ "Mic Jack", "Mic Bias",
++ "Headphone Jack", "HP_OUT";
++ mux-int-port = <1>;
++ mux-ext-port = <4>;
++ };
++};
++
++&audmux {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_audmux_1>;
++ status = "okay";
++};
++
++&ecspi1 {
++ fsl,spi-num-chipselects = <1>;
++ cs-gpios = <&gpio3 19 0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_ecspi1_1>;
++ status = "okay";
++
++ flash: m25p80@0 {
++ compatible = "sst,w25q256";
++ spi-max-frequency = <30000000>;
++ reg = <0>;
++ };
++};
++
++&fec {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_enet_1>;
++ phy-mode = "rgmii";
++ phy-reset-gpios = <&gpio1 30 0>;
++ status = "okay";
++};
++
++&i2c1 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c1_1>;
++ status = "okay";
++
++ eeprom1: eeprom@50 {
++ compatible = "atmel,24c02";
++ reg = <0x50>;
++ pagesize = <16>;
++ };
++
++ eeprom2: eeprom@51 {
++ compatible = "atmel,24c02";
++ reg = <0x51>;
++ pagesize = <16>;
++ };
++
++ eeprom3: eeprom@52 {
++ compatible = "atmel,24c02";
++ reg = <0x52>;
++ pagesize = <16>;
++ };
++
++ eeprom4: eeprom@53 {
++ compatible = "atmel,24c02";
++ reg = <0x53>;
++ pagesize = <16>;
++ };
++
++ gpio: pca9555@23 {
++ compatible = "nxp,pca9555";
++ reg = <0x23>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++
++ hwmon: gsc@29 {
++ compatible = "gw,gsp";
++ reg = <0x29>;
++ };
++
++ rtc: ds1672@68 {
++ compatible = "dallas,ds1672";
++ reg = <0x68>;
++ };
++};
++
++&i2c2 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c2_2>;
++ status = "okay";
++
++ pmic: pfuze100@08 {
++ compatible = "fsl,pfuze100";
++ reg = <0x08>;
++
++ regulators {
++ sw1a_reg: sw1ab {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
++ };
++
++ sw1c_reg: sw1c {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
++ };
++
++ sw2_reg: sw2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3950000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3a_reg: sw3a {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3b_reg: sw3b {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw4_reg: sw4 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ swbst_reg: swbst {
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5150000>;
++ };
++
++ snvs_reg: vsnvs {
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vref_reg: vrefddr {
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vgen1_reg: vgen1 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen2_reg: vgen2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen3_reg: vgen3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ vgen4_reg: vgen4 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen5_reg: vgen5 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen6_reg: vgen6 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++ };
++ };
++
++ pciswitch: pex8609@3f {
++ compatible = "plx,pex8609";
++ reg = <0x3f>;
++ };
++
++ pciclkgen: si52147@6b {
++ compatible = "sil,si52147";
++ reg = <0x6b>;
++ };
++};
++
++&i2c3 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c3_2>;
++ status = "okay";
++
++ accelerometer: mma8450@1c {
++ compatible = "fsl,mma8450";
++ reg = <0x1c>;
++ };
++
++ codec: sgtl5000@0a {
++ compatible = "fsl,sgtl5000";
++ reg = <0x0a>;
++ clocks = <&clks 201>;
++ VDDA-supply = <&sw4_reg>;
++ VDDIO-supply = <®_3p3v>;
++ };
++
++ hdmiin: adv7611@4c {
++ compatible = "adi,adv7611";
++ reg = <0x4c>;
++ };
++
++ touchscreen: egalax_ts@04 {
++ compatible = "eeti,egalax_ts";
++ reg = <0x04>;
++ interrupt-parent = <&gpio7>;
++ interrupts = <12 2>; /* gpio7_12 active low */
++ wakeup-gpios = <&gpio7 12 0>;
++ };
++
++ videoout: adv7393@2a {
++ compatible = "adi,adv7393";
++ reg = <0x2a>;
++ };
++
++ videoin: adv7180@20 {
++ compatible = "adi,adv7180";
++ reg = <0x20>;
++ };
++};
++
++&iomuxc {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_hog>;
++
++ hog {
++ pinctrl_hog: hoggrp {
++ fsl,pins = <
++ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
++ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
++ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
++ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
++ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
++ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */
++ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
++ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
++ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */
++ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
++ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
++ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
++ >;
++ };
++ };
++};
++
++&ldb {
++ status = "okay";
++ lvds-channel@0 {
++ crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
++ };
++};
++
++&pcie {
++ reset-gpio = <&gpio1 29 0>;
++ status = "okay";
++
++ eth1: sky2@8 { /* MAC/PHY on bus 8 */
++ compatible = "marvell,sky2";
++ };
++};
++
++&ssi1 {
++ fsl,mode = "i2s-slave";
++ status = "okay";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart1_2>;
++ status = "okay";
++};
++
++&uart2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart2_3>;
++ status = "okay";
++};
++
++&uart5 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart5_1>;
++ status = "okay";
++};
++
++&usbotg {
++ vbus-supply = <®_usb_otg_vbus>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usbotg_1>;
++ disable-over-current;
++ status = "okay";
++};
++
++&usbh1 {
++ vbus-supply = <®_usb_h1_vbus>;
++ status = "okay";
++};
++
++&usdhc3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usdhc3_2>;
++ cd-gpios = <&gpio7 0 0>;
++ vmmc-supply = <®_3p3v>;
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
+@@ -0,0 +1,23 @@
++/*
++ * Copyright 2013 Gateworks Corporation
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++#include "imx6q.dtsi"
++#include "imx6qdl-gw54xx.dtsi"
++
++/ {
++ model = "Gateworks Ventana i.MX6 Quad GW54XX";
++ compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
++};
++
++&sata {
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+@@ -0,0 +1,272 @@
++/*
++ * Copyright 2013 Gateworks Corporation
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/ {
++ /* these are used by bootloader for disabling nodes */
++ aliases {
++ can0 = &can1;
++ ethernet0 = &fec;
++ led0 = &led0;
++ led1 = &led1;
++ nand = &gpmi;
++ usb0 = &usbh1;
++ usb1 = &usbotg;
++ };
++
++ chosen {
++ bootargs = "console=ttymxc1,115200";
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led0: user1 {
++ label = "user1";
++ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
++ default-state = "on";
++ linux,default-trigger = "heartbeat";
++ };
++
++ led1: user2 {
++ label = "user2";
++ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
++ default-state = "off";
++ };
++ };
++
++ memory {
++ reg = <0x10000000 0x20000000>;
++ };
++
++ pps {
++ compatible = "pps-gpio";
++ gpios = <&gpio1 26 0>;
++ status = "okay";
++ };
++
++ regulators {
++ compatible = "simple-bus";
++
++ reg_3p3v: 3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "3P3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ reg_5p0v: 5p0v {
++ compatible = "regulator-fixed";
++ regulator-name = "5P0V";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-always-on;
++ };
++
++ reg_usb_otg_vbus: usb_otg_vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_otg_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio3 22 0>;
++ enable-active-high;
++ };
++ };
++};
++
++&fec {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_enet_1>;
++ phy-mode = "rgmii";
++ phy-reset-gpios = <&gpio1 30 0>;
++ status = "okay";
++};
++
++&gpmi {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
++ status = "okay";
++};
++
++&i2c1 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c1_1>;
++ status = "okay";
++
++ eeprom1: eeprom@50 {
++ compatible = "atmel,24c02";
++ reg = <0x50>;
++ pagesize = <16>;
++ };
++
++ eeprom2: eeprom@51 {
++ compatible = "atmel,24c02";
++ reg = <0x51>;
++ pagesize = <16>;
++ };
++
++ eeprom3: eeprom@52 {
++ compatible = "atmel,24c02";
++ reg = <0x52>;
++ pagesize = <16>;
++ };
++
++ eeprom4: eeprom@53 {
++ compatible = "atmel,24c02";
++ reg = <0x53>;
++ pagesize = <16>;
++ };
++
++ gpio: pca9555@23 {
++ compatible = "nxp,pca9555";
++ reg = <0x23>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++
++ hwmon: gsc@29 {
++ compatible = "gw,gsp";
++ reg = <0x29>;
++ };
++
++ rtc: ds1672@68 {
++ compatible = "dallas,ds1672";
++ reg = <0x68>;
++ };
++};
++
++&i2c2 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c2_2>;
++ status = "okay";
++
++ pmic: ltc3676@3c {
++ compatible = "ltc,ltc3676";
++ reg = <0x3c>;
++
++ regulators {
++ sw1_reg: ltc3676__sw1 {
++ regulator-min-microvolt = <1175000>;
++ regulator-max-microvolt = <1175000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw2_reg: ltc3676__sw2 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3_reg: ltc3676__sw3 {
++ regulator-min-microvolt = <1175000>;
++ regulator-max-microvolt = <1175000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw4_reg: ltc3676__sw4 {
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ ldo2_reg: ltc3676__ldo2 {
++ regulator-min-microvolt = <2500000>;
++ regulator-max-microvolt = <2500000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ ldo4_reg: ltc3676__ldo4 {
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ };
++ };
++ };
++};
++
++&i2c3 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c3_2>;
++ status = "okay";
++
++ videoin: adv7180@20 {
++ compatible = "adi,adv7180";
++ reg = <0x20>;
++ };
++};
++
++&iomuxc {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_hog>;
++
++ hog {
++ pinctrl_hog: hoggrp {
++ fsl,pins = <
++ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
++ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
++ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
++ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
++ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
++ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */
++ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
++ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
++ >;
++ };
++ };
++};
++
++&pcie {
++ reset-gpio = <&gpio1 0 0>;
++ status = "okay";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart1_2>;
++ status = "okay";
++};
++
++&uart2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart2_3>;
++ status = "okay";
++};
++
++&uart3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart3_3>;
++ status = "okay";
++};
++
++&uart5 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart5_1>;
++ status = "okay";
++};
++
++&usbotg {
++ vbus-supply = <®_usb_otg_vbus>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usbotg_1>;
++ disable-over-current;
++ status = "okay";
++};
++
++&usbh1 {
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+@@ -0,0 +1,373 @@
++/*
++ * Copyright 2013 Gateworks Corporation
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/ {
++ /* these are used by bootloader for disabling nodes */
++ aliases {
++ ethernet0 = &fec;
++ led0 = &led0;
++ led1 = &led1;
++ led2 = &led2;
++ nand = &gpmi;
++ ssi0 = &ssi1;
++ usb0 = &usbh1;
++ usb1 = &usbotg;
++ usdhc2 = &usdhc3;
++ };
++
++ chosen {
++ bootargs = "console=ttymxc1,115200";
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led0: user1 {
++ label = "user1";
++ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
++ default-state = "on";
++ linux,default-trigger = "heartbeat";
++ };
++
++ led1: user2 {
++ label = "user2";
++ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
++ default-state = "off";
++ };
++
++ led2: user3 {
++ label = "user3";
++ gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
++ default-state = "off";
++ };
++ };
++
++ memory {
++ reg = <0x10000000 0x20000000>;
++ };
++
++ pps {
++ compatible = "pps-gpio";
++ gpios = <&gpio1 26 0>;
++ status = "okay";
++ };
++
++ regulators {
++ compatible = "simple-bus";
++
++ reg_1p0v: 1p0v {
++ compatible = "regulator-fixed";
++ regulator-name = "1P0V";
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1000000>;
++ regulator-always-on;
++ };
++
++ /* remove this fixed regulator once ltc3676__sw2 driver available */
++ reg_1p8v: 1p8v {
++ compatible = "regulator-fixed";
++ regulator-name = "1P8V";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-always-on;
++ };
++
++ reg_3p3v: 3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "3P3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ reg_5p0v: 5p0v {
++ compatible = "regulator-fixed";
++ regulator-name = "5P0V";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-always-on;
++ };
++
++ reg_usb_otg_vbus: usb_otg_vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_otg_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio3 22 0>;
++ enable-active-high;
++ };
++ };
++
++ sound {
++ compatible = "fsl,imx6q-sabrelite-sgtl5000",
++ "fsl,imx-audio-sgtl5000";
++ model = "imx6q-sabrelite-sgtl5000";
++ ssi-controller = <&ssi1>;
++ audio-codec = <&codec>;
++ audio-routing =
++ "MIC_IN", "Mic Jack",
++ "Mic Jack", "Mic Bias",
++ "Headphone Jack", "HP_OUT";
++ mux-int-port = <1>;
++ mux-ext-port = <4>;
++ };
++};
++
++&audmux {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_audmux_1>;
++ status = "okay";
++};
++
++&fec {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_enet_1>;
++ phy-mode = "rgmii";
++ phy-reset-gpios = <&gpio1 30 0>;
++ status = "okay";
++};
++
++&gpmi {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
++ status = "okay";
++};
++
++&i2c1 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c1_1>;
++ status = "okay";
++
++ eeprom1: eeprom@50 {
++ compatible = "atmel,24c02";
++ reg = <0x50>;
++ pagesize = <16>;
++ };
++
++ eeprom2: eeprom@51 {
++ compatible = "atmel,24c02";
++ reg = <0x51>;
++ pagesize = <16>;
++ };
++
++ eeprom3: eeprom@52 {
++ compatible = "atmel,24c02";
++ reg = <0x52>;
++ pagesize = <16>;
++ };
++
++ eeprom4: eeprom@53 {
++ compatible = "atmel,24c02";
++ reg = <0x53>;
++ pagesize = <16>;
++ };
++
++ gpio: pca9555@23 {
++ compatible = "nxp,pca9555";
++ reg = <0x23>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++
++ hwmon: gsc@29 {
++ compatible = "gw,gsp";
++ reg = <0x29>;
++ };
++
++ rtc: ds1672@68 {
++ compatible = "dallas,ds1672";
++ reg = <0x68>;
++ };
++};
++
++&i2c2 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c2_2>;
++ status = "okay";
++
++ pciswitch: pex8609@3f {
++ compatible = "plx,pex8609";
++ reg = <0x3f>;
++ };
++
++ pmic: ltc3676@3c {
++ compatible = "ltc,ltc3676";
++ reg = <0x3c>;
++
++ regulators {
++ sw1_reg: ltc3676__sw1 {
++ regulator-min-microvolt = <1175000>;
++ regulator-max-microvolt = <1175000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw2_reg: ltc3676__sw2 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3_reg: ltc3676__sw3 {
++ regulator-min-microvolt = <1175000>;
++ regulator-max-microvolt = <1175000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw4_reg: ltc3676__sw4 {
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ ldo2_reg: ltc3676__ldo2 {
++ regulator-min-microvolt = <2500000>;
++ regulator-max-microvolt = <2500000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ ldo3_reg: ltc3676__ldo3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ ldo4_reg: ltc3676__ldo4 {
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ };
++ };
++ };
++};
++
++&i2c3 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c3_2>;
++ status = "okay";
++
++ accelerometer: fxos8700@1e {
++ compatible = "fsl,fxos8700";
++ reg = <0x13>;
++ };
++
++ codec: sgtl5000@0a {
++ compatible = "fsl,sgtl5000";
++ reg = <0x0a>;
++ clocks = <&clks 169>;
++ VDDA-supply = <®_1p8v>;
++ VDDIO-supply = <®_3p3v>;
++ };
++
++ touchscreen: egalax_ts@04 {
++ compatible = "eeti,egalax_ts";
++ reg = <0x04>;
++ interrupt-parent = <&gpio7>;
++ interrupts = <12 2>; /* gpio7_12 active low */
++ wakeup-gpios = <&gpio7 12 0>;
++ };
++
++ videoin: adv7180@20 {
++ compatible = "adi,adv7180";
++ reg = <0x20>;
++ };
++};
++
++&iomuxc {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_hog>;
++
++ hog {
++ pinctrl_hog: hoggrp {
++ fsl,pins = <
++ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
++ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
++ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
++ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */
++ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
++ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
++ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
++ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
++ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
++ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */
++ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
++ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
++ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
++ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
++ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */
++ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */
++ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */
++ >;
++ };
++ };
++};
++
++&ldb {
++ status = "okay";
++ lvds-channel@0 {
++ crtcs = <&ipu1 0>, <&ipu1 1>;
++ };
++};
++
++&pcie {
++ reset-gpio = <&gpio1 29 0>;
++ status = "okay";
++};
++
++&ssi1 {
++ fsl,mode = "i2s-slave";
++ status = "okay";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart1_2>;
++ status = "okay";
++};
++
++&uart2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart2_3>;
++ status = "okay";
++};
++
++&uart5 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart5_1>;
++ status = "okay";
++};
++
++&usbotg {
++ vbus-supply = <®_usb_otg_vbus>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usbotg_1>;
++ disable-over-current;
++ status = "okay";
++};
++
++&usbh1 {
++ status = "okay";
++};
++
++&usdhc3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usdhc3_2>;
++ cd-gpios = <&gpio7 0 0>;
++ vmmc-supply = <®_3p3v>;
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+@@ -0,0 +1,429 @@
++/*
++ * Copyright 2013 Gateworks Corporation
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/ {
++ /* these are used by bootloader for disabling nodes */
++ aliases {
++ can0 = &can1;
++ ethernet0 = &fec;
++ ethernet1 = ð1;
++ led0 = &led0;
++ led1 = &led1;
++ led2 = &led2;
++ nand = &gpmi;
++ sky2 = ð1;
++ ssi0 = &ssi1;
++ usb0 = &usbh1;
++ usb1 = &usbotg;
++ usdhc2 = &usdhc3;
++ };
++
++ chosen {
++ bootargs = "console=ttymxc1,115200";
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led0: user1 {
++ label = "user1";
++ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
++ default-state = "on";
++ linux,default-trigger = "heartbeat";
++ };
++
++ led1: user2 {
++ label = "user2";
++ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
++ default-state = "off";
++ };
++
++ led2: user3 {
++ label = "user3";
++ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
++ default-state = "off";
++ };
++ };
++
++ memory {
++ reg = <0x10000000 0x40000000>;
++ };
++
++ pps {
++ compatible = "pps-gpio";
++ gpios = <&gpio1 26 0>;
++ status = "okay";
++ };
++
++ regulators {
++ compatible = "simple-bus";
++
++ reg_1p0v: 1p0v {
++ compatible = "regulator-fixed";
++ regulator-name = "1P0V";
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1000000>;
++ regulator-always-on;
++ };
++
++ /* remove when pmic 1p8 regulator available */
++ reg_1p8v: 1p8v {
++ compatible = "regulator-fixed";
++ regulator-name = "1P8V";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-always-on;
++ };
++
++ reg_3p3v: 3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "3P3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ reg_usb_h1_vbus: usb_h1_vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_h1_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-always-on;
++ };
++
++ reg_usb_otg_vbus: usb_otg_vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_otg_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio3 22 0>;
++ enable-active-high;
++ };
++ };
++
++ sound {
++ compatible = "fsl,imx6q-sabrelite-sgtl5000",
++ "fsl,imx-audio-sgtl5000";
++ model = "imx6q-sabrelite-sgtl5000";
++ ssi-controller = <&ssi1>;
++ audio-codec = <&codec>;
++ audio-routing =
++ "MIC_IN", "Mic Jack",
++ "Mic Jack", "Mic Bias",
++ "Headphone Jack", "HP_OUT";
++ mux-int-port = <1>;
++ mux-ext-port = <4>;
++ };
++};
++
++&audmux {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_audmux_1>;
++ status = "okay";
++};
++
++&can1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_flexcan1_1>;
++ status = "okay";
++};
++
++&fec {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_enet_1>;
++ phy-mode = "rgmii";
++ phy-reset-gpios = <&gpio1 30 0>;
++ status = "okay";
++};
++
++&gpmi {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
++ status = "okay";
++};
++
++&i2c1 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c1_1>;
++ status = "okay";
++
++ eeprom1: eeprom@50 {
++ compatible = "atmel,24c02";
++ reg = <0x50>;
++ pagesize = <16>;
++ };
++
++ eeprom2: eeprom@51 {
++ compatible = "atmel,24c02";
++ reg = <0x51>;
++ pagesize = <16>;
++ };
++
++ eeprom3: eeprom@52 {
++ compatible = "atmel,24c02";
++ reg = <0x52>;
++ pagesize = <16>;
++ };
++
++ eeprom4: eeprom@53 {
++ compatible = "atmel,24c02";
++ reg = <0x53>;
++ pagesize = <16>;
++ };
++
++ gpio: pca9555@23 {
++ compatible = "nxp,pca9555";
++ reg = <0x23>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++
++ hwmon: gsc@29 {
++ compatible = "gw,gsp";
++ reg = <0x29>;
++ };
++
++ rtc: ds1672@68 {
++ compatible = "dallas,ds1672";
++ reg = <0x68>;
++ };
++};
++
++&i2c2 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c2_2>;
++ status = "okay";
++
++ pciclkgen: si53156@6b {
++ compatible = "sil,si53156";
++ reg = <0x6b>;
++ };
++
++ pciswitch: pex8606@3f {
++ compatible = "plx,pex8606";
++ reg = <0x3f>;
++ };
++
++ pmic: ltc3676@3c {
++ compatible = "ltc,ltc3676";
++ reg = <0x3c>;
++
++ regulators {
++ /* VDD_SOC */
++ sw1_reg: ltc3676__sw1 {
++ regulator-min-microvolt = <1175000>;
++ regulator-max-microvolt = <1175000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ /* VDD_1P8 */
++ sw2_reg: ltc3676__sw2 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ /* VDD_ARM */
++ sw3_reg: ltc3676__sw3 {
++ regulator-min-microvolt = <1175000>;
++ regulator-max-microvolt = <1175000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ /* VDD_DDR */
++ sw4_reg: ltc3676__sw4 {
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ /* VDD_2P5 */
++ ldo2_reg: ltc3676__ldo2 {
++ regulator-min-microvolt = <2500000>;
++ regulator-max-microvolt = <2500000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ /* VDD_1P8 */
++ ldo3_reg: ltc3676__ldo3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ /* VDD_HIGH */
++ ldo4_reg: ltc3676__ldo4 {
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ };
++ };
++ };
++};
++
++&i2c3 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c3_2>;
++ status = "okay";
++
++ accelerometer: fxos8700@1e {
++ compatible = "fsl,fxos8700";
++ reg = <0x1e>;
++ };
++
++ codec: sgtl5000@0a {
++ compatible = "fsl,sgtl5000";
++ reg = <0x0a>;
++ clocks = <&clks 201>;
++ VDDA-supply = <®_1p8v>;
++ VDDIO-supply = <®_3p3v>;
++ };
++
++ hdmiin: adv7611@4c {
++ compatible = "adi,adv7611";
++ reg = <0x4c>;
++ };
++
++ touchscreen: egalax_ts@04 {
++ compatible = "eeti,egalax_ts";
++ reg = <0x04>;
++ interrupt-parent = <&gpio1>;
++ interrupts = <11 2>; /* gpio1_11 active low */
++ wakeup-gpios = <&gpio1 11 0>;
++ };
++
++ videoout: adv7393@2a {
++ compatible = "adi,adv7393";
++ reg = <0x2a>;
++ };
++
++ videoin: adv7180@20 {
++ compatible = "adi,adv7180";
++ reg = <0x20>;
++ };
++};
++
++&iomuxc {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_hog>;
++
++ hog {
++ pinctrl_hog: hoggrp {
++ fsl,pins = <
++ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* PCIE6EXP_DIO0 */
++ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* PCIE6EXP_DIO1 */
++ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
++ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_SHDN */
++ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
++ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
++ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
++ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
++ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
++ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 /* PMIC_IRQ# */
++ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* HUB_RST# */
++ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIE_WDIS# */
++ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* ACCEL_IRQ# */
++ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
++ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x80000000 /* USBOTG_OC# */
++ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
++ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
++ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* TOUCH_IRQ# */
++ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_DET# */
++ >;
++ };
++ };
++};
++
++&ldb {
++ status = "okay";
++
++ lvds-channel@1 {
++ fsl,data-mapping = "spwg";
++ fsl,data-width = <18>;
++ status = "okay";
++
++ display-timings {
++ native-mode = <&timing0>;
++ timing0: hsd100pxn1 {
++ clock-frequency = <65000000>;
++ hactive = <1024>;
++ vactive = <768>;
++ hback-porch = <220>;
++ hfront-porch = <40>;
++ vback-porch = <21>;
++ vfront-porch = <7>;
++ hsync-len = <60>;
++ vsync-len = <10>;
++ };
++ };
++ };
++};
++
++&pcie {
++ reset-gpio = <&gpio1 29 0>;
++ status = "okay";
++
++ eth1: sky2@8 { /* MAC/PHY on bus 8 */
++ compatible = "marvell,sky2";
++ };
++};
++
++&ssi1 {
++ fsl,mode = "i2s-slave";
++ status = "okay";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart1_2>;
++ status = "okay";
++};
++
++&uart2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart2_3>;
++ status = "okay";
++};
++
++&uart5 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart5_1>;
++ status = "okay";
++};
++
++&usbotg {
++ vbus-supply = <®_usb_otg_vbus>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usbotg_1>;
++ disable-over-current;
++ status = "okay";
++};
++
++&usbh1 {
++ vbus-supply = <®_usb_h1_vbus>;
++ status = "okay";
++};
++
++&usdhc3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usdhc3_2>;
++ cd-gpios = <&gpio7 0 0>;
++ vmmc-supply = <®_3p3v>;
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+@@ -0,0 +1,457 @@
++/*
++ * Copyright 2013 Gateworks Corporation
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/ {
++ /* these are used by bootloader for disabling nodes */
++ aliases {
++ can0 = &can1;
++ ethernet0 = &fec;
++ ethernet1 = ð1;
++ led0 = &led0;
++ led1 = &led1;
++ led2 = &led2;
++ nand = &gpmi;
++ sky2 = ð1;
++ ssi0 = &ssi1;
++ usb0 = &usbh1;
++ usb1 = &usbotg;
++ usdhc2 = &usdhc3;
++ };
++
++ chosen {
++ bootargs = "console=ttymxc1,115200";
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led0: user1 {
++ label = "user1";
++ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
++ default-state = "on";
++ linux,default-trigger = "heartbeat";
++ };
++
++ led1: user2 {
++ label = "user2";
++ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
++ default-state = "off";
++ };
++
++ led2: user3 {
++ label = "user3";
++ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
++ default-state = "off";
++ };
++ };
++
++ memory {
++ reg = <0x10000000 0x40000000>;
++ };
++
++ pps {
++ compatible = "pps-gpio";
++ gpios = <&gpio1 26 0>;
++ status = "okay";
++ };
++
++ regulators {
++ compatible = "simple-bus";
++
++ reg_1p0v: 1p0v {
++ compatible = "regulator-fixed";
++ regulator-name = "1P0V";
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1000000>;
++ regulator-always-on;
++ };
++
++ reg_3p3v: 3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "3P3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ reg_usb_h1_vbus: usb_h1_vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_h1_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-always-on;
++ };
++
++ reg_usb_otg_vbus: usb_otg_vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_otg_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio3 22 0>;
++ enable-active-high;
++ };
++ };
++
++ sound {
++ compatible = "fsl,imx6q-sabrelite-sgtl5000",
++ "fsl,imx-audio-sgtl5000";
++ model = "imx6q-sabrelite-sgtl5000";
++ ssi-controller = <&ssi1>;
++ audio-codec = <&codec>;
++ audio-routing =
++ "MIC_IN", "Mic Jack",
++ "Mic Jack", "Mic Bias",
++ "Headphone Jack", "HP_OUT";
++ mux-int-port = <1>;
++ mux-ext-port = <4>;
++ };
++};
++
++&audmux {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_audmux_1>; /* AUD4<->sgtl5000 */
++ status = "okay";
++};
++
++&can1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_flexcan1_1>;
++ status = "okay";
++};
++
++&fec {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_enet_1>;
++ phy-mode = "rgmii";
++ phy-reset-gpios = <&gpio1 30 0>;
++ status = "okay";
++};
++
++&gpmi {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
++ status = "okay";
++};
++
++&i2c1 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c1_1>;
++ status = "okay";
++
++ eeprom1: eeprom@50 {
++ compatible = "atmel,24c02";
++ reg = <0x50>;
++ pagesize = <16>;
++ };
++
++ eeprom2: eeprom@51 {
++ compatible = "atmel,24c02";
++ reg = <0x51>;
++ pagesize = <16>;
++ };
++
++ eeprom3: eeprom@52 {
++ compatible = "atmel,24c02";
++ reg = <0x52>;
++ pagesize = <16>;
++ };
++
++ eeprom4: eeprom@53 {
++ compatible = "atmel,24c02";
++ reg = <0x53>;
++ pagesize = <16>;
++ };
++
++ gpio: pca9555@23 {
++ compatible = "nxp,pca9555";
++ reg = <0x23>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++
++ hwmon: gsc@29 {
++ compatible = "gw,gsp";
++ reg = <0x29>;
++ };
++
++ rtc: ds1672@68 {
++ compatible = "dallas,ds1672";
++ reg = <0x68>;
++ };
++};
++
++&i2c2 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c2_2>;
++ status = "okay";
++
++ pmic: pfuze100@08 {
++ compatible = "fsl,pfuze100";
++ reg = <0x08>;
++
++ regulators {
++ sw1a_reg: sw1ab {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
++ };
++
++ sw1c_reg: sw1c {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
++ };
++
++ sw2_reg: sw2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3950000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3a_reg: sw3a {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3b_reg: sw3b {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw4_reg: sw4 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ swbst_reg: swbst {
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5150000>;
++ };
++
++ snvs_reg: vsnvs {
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vref_reg: vrefddr {
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vgen1_reg: vgen1 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen2_reg: vgen2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen3_reg: vgen3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ vgen4_reg: vgen4 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen5_reg: vgen5 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen6_reg: vgen6 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++ };
++ };
++
++ pciswitch: pex8609@3f {
++ compatible = "plx,pex8609";
++ reg = <0x3f>;
++ };
++
++ pciclkgen: si52147@6b {
++ compatible = "sil,si52147";
++ reg = <0x6b>;
++ };
++};
++
++&i2c3 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c3_2>;
++ status = "okay";
++
++ accelerometer: fxos8700@1e {
++ compatible = "fsl,fxos8700";
++ reg = <0x1e>;
++ };
++
++ codec: sgtl5000@0a {
++ compatible = "fsl,sgtl5000";
++ reg = <0x0a>;
++ clocks = <&clks 201>;
++ VDDA-supply = <&sw4_reg>;
++ VDDIO-supply = <®_3p3v>;
++ };
++
++ hdmiin: adv7611@4c {
++ compatible = "adi,adv7611";
++ reg = <0x4c>;
++ };
++
++ touchscreen: egalax_ts@04 {
++ compatible = "eeti,egalax_ts";
++ reg = <0x04>;
++ interrupt-parent = <&gpio7>;
++ interrupts = <12 2>; /* gpio7_12 active low */
++ wakeup-gpios = <&gpio7 12 0>;
++ };
++
++ videoout: adv7393@2a {
++ compatible = "adi,adv7393";
++ reg = <0x2a>;
++ };
++
++ videoin: adv7180@20 {
++ compatible = "adi,adv7180";
++ reg = <0x20>;
++ };
++};
++
++&iomuxc {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_hog>;
++
++ hog {
++ pinctrl_hog: hoggrp {
++ fsl,pins = <
++ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
++ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
++ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
++ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
++ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
++ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
++ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
++ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
++ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
++ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
++ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
++ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
++ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
++ >;
++ };
++ };
++};
++
++&ldb {
++ status = "okay";
++
++ lvds-channel@1 {
++ fsl,data-mapping = "spwg";
++ fsl,data-width = <18>;
++ status = "okay";
++
++ display-timings {
++ native-mode = <&timing0>;
++ timing0: hsd100pxn1 {
++ clock-frequency = <65000000>;
++ hactive = <1024>;
++ vactive = <768>;
++ hback-porch = <220>;
++ hfront-porch = <40>;
++ vback-porch = <21>;
++ vfront-porch = <7>;
++ hsync-len = <60>;
++ vsync-len = <10>;
++ };
++ };
++ };
++};
++
++&pcie {
++ reset-gpio = <&gpio1 29 0>;
++ status = "okay";
++
++ eth1: sky2@8 { /* MAC/PHY on bus 8 */
++ compatible = "marvell,sky2";
++ };
++};
++
++&ssi1 {
++ fsl,mode = "i2s-slave";
++ status = "okay";
++};
++
++&ssi2 {
++ fsl,mode = "i2s-slave";
++ status = "okay";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart1_2>;
++ status = "okay";
++};
++
++&uart2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart2_3>;
++ status = "okay";
++};
++
++&uart5 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart5_1>;
++ status = "okay";
++};
++
++&usbotg {
++ vbus-supply = <®_usb_otg_vbus>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usbotg_1>;
++ disable-over-current;
++ status = "okay";
++};
++
++&usbh1 {
++ vbus-supply = <®_usb_h1_vbus>;
++ status = "okay";
++};
++
++&usdhc3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_usdhc3_2>;
++ cd-gpios = <&gpio7 0 0>;
++ vmmc-supply = <®_3p3v>;
++ status = "okay";
++};
projects / openwrt / staging / ansuel.git / commitdiff