+++ /dev/null
-From: Mirko Parthey <mirko.parthey@web.de>
-Subject: [PATCH] MIPS: bcm47xx: Fix button inversion for Asus WL-500W
-
-The Asus WL-500W buttons are active high,
-but the software treats them as active low.
-Fix the inverted logic.
-
-Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
----
- arch/mips/bcm47xx/buttons.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -17,6 +17,12 @@
- .active_low = 1, \
- }
-
-+#define BCM47XX_GPIO_KEY_H(_gpio, _code) \
-+ { \
-+ .code = _code, \
-+ .gpio = _gpio, \
-+ }
-+
- /* Asus */
-
- static const struct gpio_keys_button
-@@ -79,8 +85,8 @@ bcm47xx_buttons_asus_wl500gpv2[] __initc
-
- static const struct gpio_keys_button
- bcm47xx_buttons_asus_wl500w[] __initconst = {
-- BCM47XX_GPIO_KEY(6, KEY_RESTART),
-- BCM47XX_GPIO_KEY(7, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY_H(6, KEY_RESTART),
-+ BCM47XX_GPIO_KEY_H(7, KEY_WPS_BUTTON),
- };
-
- static const struct gpio_keys_button
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 19 Jan 2017 14:14:36 +0100
-Subject: [PATCH] MIPS: Lantiq: Keep ethernet enabled during boot
-
-Disabling ethernet during reboot (only to enable it again when the
-ethernet driver attaches) can put the chip into a faulty state where it
-corrupts the header of all incoming packets.
-
-This happens if packets arrive during the time window where the core is
-disabled, and it can be easily reproduced by rebooting while sending a
-flood ping to the broadcast address.
-
-Cc: john@phrozen.org
-Cc: hauke.mehrtens@lantiq.com
-Cc: stable@vger.kernel.org
-Fixes: 95135bfa7ead ("MIPS: Lantiq: Deactivate most of the devices by default")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -564,7 +564,7 @@ void __init ltq_soc_init(void)
- clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI);
- clkdev_add_pmu("1a800000.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI);
- clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL);
-- clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH | PMU_PPE_DP);
-+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP);
- clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
- clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
- } else if (of_machine_is_compatible("lantiq,ar10")) {
-@@ -572,7 +572,7 @@ void __init ltq_soc_init(void)
- ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz());
- clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
- clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1);
-- clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH |
-+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH |
- PMU_PPE_DP | PMU_PPE_TC);
- clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
- clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY);
-@@ -594,11 +594,11 @@ void __init ltq_soc_init(void)
- clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS);
-
- clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
-- clkdev_add_pmu("1e108000.eth", NULL, 1, 0,
-+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0,
- PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
- PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- PMU_PPE_QSB | PMU_PPE_TOP);
-- clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY);
-+ clkdev_add_pmu("1f203000.rcu", "gphy", 0, 0, PMU_GPHY);
- clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
- clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
- clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
projects / openwrt / staging / noltari.git / commitdiff