SSYNC;
/* make sure SYSCR is set to use BMODE */
- P0.h = hi(SICA_SYSCR);
- P0.l = lo(SICA_SYSCR);
- R0.l = 0x20;
+ P0.h = hi(SYSCR);
+ P0.l = lo(SYSCR);
+ R0.l = 0x20; /* on BF561, disable core b */
W[P0] = R0.l;
SSYNC;
/* issue a system soft reset */
- P1.h = hi(SICA_SWRST);
- P1.l = lo(SICA_SWRST);
+ P1.h = hi(SWRST);
+ P1.l = lo(SWRST);
R1.l = 0x0007;
W[P1] = R1;
SSYNC;
#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val)
#define bfin_read_CHIPID() bfin_read32(CHIPID)
+/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
+#define bfin_read_SWRST() bfin_read_SICA_SWRST()
+#define bfin_write_SWRST() bfin_write_SICA_SWRST()
+#define bfin_read_SYSCR() bfin_read_SICA_SYSCR()
+#define bfin_write_SYSCR() bfin_write_SICA_SYSCR()
+
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
#define bfin_read_SICA_SWRST() bfin_read16(SICA_SWRST)
#define bfin_write_SICA_SWRST(val) bfin_write16(SICA_SWRST,val)
#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */
#define CHIPID 0xFFC00014 /* Chip ID Register */
+/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
+#define SWRST SICA_SWRST
+#define SYSCR SICA_SYSCR
+
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
#define SICA_SWRST 0xFFC00100 /* Software Reset register */
#define SICA_SYSCR 0xFFC00104 /* System Reset Configuration register */